| /linux/Documentation/devicetree/bindings/arm/hisilicon/controller/ |
| H A D | hi3798cv200-perictrl.yaml | 48 reg = <0x8a20000 0x1000>; 51 ranges = <0x0 0x8a20000 0x1000>; 55 reg = <0x850 0x8>; 58 resets = <&crg 0x188 4>;
|
| /linux/drivers/clk/sophgo/ |
| H A D | clk-cv1800.h | 14 #define REG_PLL_G2_CTRL 0x800 15 #define REG_PLL_G2_STATUS 0x804 16 #define REG_MIPIMPLL_CSR 0x808 17 #define REG_A0PLL_CSR 0x80C 18 #define REG_DISPPLL_CSR 0x810 19 #define REG_CAM0PLL_CSR 0x814 20 #define REG_CAM1PLL_CSR 0x818 21 #define REG_PLL_G2_SSC_SYN_CTRL 0x840 22 #define REG_A0PLL_SSC_SYN_CTRL 0x850 23 #define REG_A0PLL_SSC_SYN_SET 0x854 [all …]
|
| /linux/include/dt-bindings/pinctrl/ |
| H A D | am33xx.h | 18 #define SLEWCTRL_FAST 0 30 #define PIN_OUTPUT_PULLDOWN 0 43 #define AM335X_PIN_OFFSET_MIN 0x0800U 45 #define AM335X_PIN_GPMC_AD0 0x800 46 #define AM335X_PIN_GPMC_AD1 0x804 47 #define AM335X_PIN_GPMC_AD2 0x808 48 #define AM335X_PIN_GPMC_AD3 0x80c 49 #define AM335X_PIN_GPMC_AD4 0x810 50 #define AM335X_PIN_GPMC_AD5 0x814 51 #define AM335X_PIN_GPMC_AD6 0x818 [all …]
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra74x-mmc-iodelay.dtsi | 35 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ 36 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ 37 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ 38 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ 39 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ 40 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ 46 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ 47 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ 48 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ 49 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ [all …]
|
| H A D | dra76x-mmc-iodelay.dtsi | 32 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ 33 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ 34 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ 35 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ 36 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ 37 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ 43 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ 44 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ 45 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ 46 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ [all …]
|
| H A D | am335x-pocketbeagle.dts | 23 pinctrl-0 = <&usr_leds_pins>; 130 "[USR LED 0]", 151 "[SYSBOOT 0]", 220 /* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */ 225 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; 226 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; 229 /* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */ 234 pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; 235 pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; 238 /* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */ [all …]
|
| H A D | am437x-gp-evm.dts | 57 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 58 brightness-levels = <0 51 53 56 62 75 101 152 255>; 68 pinctrl-0 = <&matrix_keypad_default>; 80 linux,keymap = <0x00000201 /* P1 */ 81 0x00010202 /* P2 */ 82 0x01000067 /* UP */ 83 0x0101006a /* RIGHT */ 84 0x02000069 /* LEFT */ 85 0x0201006c>; /* DOWN */ 103 #clock-cells = <0>; [all …]
|
| /linux/drivers/infiniband/hw/hns/ |
| H A D | hns_roce_common.h | 53 } while (0) 108 #define ROCEE_VENDOR_ID_REG 0x0 109 #define ROCEE_VENDOR_PART_ID_REG 0x4 111 #define ROCEE_SYS_IMAGE_GUID_L_REG 0xC 112 #define ROCEE_SYS_IMAGE_GUID_H_REG 0x10 114 #define ROCEE_PORT_GID_L_0_REG 0x50 115 #define ROCEE_PORT_GID_ML_0_REG 0x54 116 #define ROCEE_PORT_GID_MH_0_REG 0x58 117 #define ROCEE_PORT_GID_H_0_REG 0x5C 119 #define ROCEE_BT_CMD_H_REG 0x204 [all …]
|
| /linux/drivers/gpu/drm/sun4i/ |
| H A D | sun4i_backend.h | 20 #define SUN4I_BACKEND_MODCTL_REG 0x800 24 #define SUN4I_BACKEND_MODCTL_OUT_LCD0 (0 << 20) 34 #define SUN4I_BACKEND_MODCTL_DEBE_EN BIT(0) 36 #define SUN4I_BACKEND_BACKCOLOR_REG 0x804 39 #define SUN4I_BACKEND_DISSIZE_REG 0x808 40 #define SUN4I_BACKEND_DISSIZE(w, h) (((((h) - 1) & 0xffff) << 16) | \ 41 (((w) - 1) & 0xffff)) 43 #define SUN4I_BACKEND_LAYSIZE_REG(l) (0x810 + (0x4 * (l))) 44 #define SUN4I_BACKEND_LAYSIZE(w, h) (((((h) - 1) & 0x1fff) << 16) | \ 45 (((w) - 1) & 0x1fff)) [all …]
|
| /linux/arch/arm/boot/dts/ti/keystone/ |
| H A D | keystone-k2hk.dtsi | 16 #size-cells = <0>; 20 cpu@0 { 23 reg = <0>; 62 reg = <0x0c000000 0x600000>; 63 ranges = <0x0 0x0c000000 0x600000>; 68 reg = <0x5f0000 0x8000>; 78 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ 79 0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */ 80 0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */ 81 0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */ [all …]
|
| H A D | keystone-k2l.dtsi | 16 #size-cells = <0>; 20 cpu@0 { 23 reg = <0>; 49 reg = <0x02348400 0x100>; 59 reg = <0x02348800 0x100>; 66 reg = <0x02348000 0x100>; 110 reg = <0x02620690 0xc>; 112 #size-cells = <0>; 116 pinctrl-single,function-mask = <0x1>; 122 0x0 0x0 0xc0 [all …]
|
| /linux/arch/mips/include/asm/ |
| H A D | gt64120.h | 21 #define GT_CPU_OFS 0x000 23 #define GT_MULTI_OFS 0x120 26 #define GT_SCS10LD_OFS 0x008 27 #define GT_SCS10HD_OFS 0x010 28 #define GT_SCS32LD_OFS 0x018 29 #define GT_SCS32HD_OFS 0x020 30 #define GT_CS20LD_OFS 0x028 31 #define GT_CS20HD_OFS 0x030 32 #define GT_CS3BOOTLD_OFS 0x038 33 #define GT_CS3BOOTHD_OFS 0x040 [all …]
|
| /linux/drivers/fpga/ |
| H A D | socfpga.c | 18 #define SOCFPGA_FPGMGR_STAT_OFST 0x0 19 #define SOCFPGA_FPGMGR_CTL_OFST 0x4 20 #define SOCFPGA_FPGMGR_DCLKCNT_OFST 0x8 21 #define SOCFPGA_FPGMGR_DCLKSTAT_OFST 0xc 22 #define SOCFPGA_FPGMGR_GPIO_INTEN_OFST 0x830 23 #define SOCFPGA_FPGMGR_GPIO_INTMSK_OFST 0x834 24 #define SOCFPGA_FPGMGR_GPIO_INTTYPE_LEVEL_OFST 0x838 25 #define SOCFPGA_FPGMGR_GPIO_INT_POL_OFST 0x83c 26 #define SOCFPGA_FPGMGR_GPIO_INTSTAT_OFST 0x840 27 #define SOCFPGA_FPGMGR_GPIO_RAW_INTSTAT_OFST 0x844 [all …]
|
| /linux/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/ |
| H A D | table.c | 7 0x024, 0x0011800f, 8 0x028, 0x00ffdb83, 9 0x800, 0x80040002, 10 0x804, 0x00000003, 11 0x808, 0x0000fc00, 12 0x80c, 0x0000000a, 13 0x810, 0x10000330, 14 0x814, 0x020c3d10, 15 0x818, 0x02200385, 16 0x81c, 0x00000000, [all …]
|
| /linux/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/ |
| H A D | table.c | 7 0x024, 0x0011800f, 8 0x028, 0x00ffdb83, 9 0x800, 0x80040002, 10 0x804, 0x00000003, 11 0x808, 0x0000fc00, 12 0x80c, 0x0000000a, 13 0x810, 0x10005388, 14 0x814, 0x020c3d10, 15 0x818, 0x02200385, 16 0x81c, 0x00000000, [all …]
|
| /linux/drivers/net/wireless/realtek/rtlwifi/rtl8723be/ |
| H A D | table.c | 8 0x800, 0x80040000, 9 0x804, 0x00000003, 10 0x808, 0x0000FC00, 11 0x80C, 0x0000000A, 12 0x810, 0x10001331, 13 0x814, 0x020C3D10, 14 0x818, 0x02200385, 15 0x81C, 0x00000000, 16 0x820, 0x01000100, 17 0x824, 0x00190204, [all …]
|
| /linux/drivers/clk/stm32/ |
| H A D | stm32mp25_rcc.h | 10 #define RCC_SECCFGR0 0x0 11 #define RCC_SECCFGR1 0x4 12 #define RCC_SECCFGR2 0x8 13 #define RCC_SECCFGR3 0xC 14 #define RCC_PRIVCFGR0 0x10 15 #define RCC_PRIVCFGR1 0x14 16 #define RCC_PRIVCFGR2 0x18 17 #define RCC_PRIVCFGR3 0x1C 18 #define RCC_RCFGLOCKR0 0x20 19 #define RCC_RCFGLOCKR1 0x24 [all …]
|
| /linux/drivers/gpu/drm/amd/include/asic_reg/gmc/ |
| H A D | gmc_7_0_d.h | 27 #define mmMC_CONFIG 0x800 28 #define mmMC_ARB_AGE_CNTL 0x9bf 29 #define mmMC_ARB_RET_CREDITS2 0x9c0 30 #define mmMC_ARB_FED_CNTL 0x9c1 31 #define mmMC_ARB_GECC2_STATUS 0x9c2 32 #define mmMC_ARB_GECC2_MISC 0x9c3 33 #define mmMC_ARB_GECC2_DEBUG 0x9c4 34 #define mmMC_ARB_GECC2_DEBUG2 0x9c5 35 #define mmMC_ARB_GECC2 0x9c9 36 #define mmMC_ARB_GECC2_CLI 0x9ca [all …]
|
| /linux/drivers/media/platform/chips-media/coda/ |
| H A D | coda_regs.h | 14 #define CODA_REG_BIT_CODE_RUN 0x000 15 #define CODA_REG_RUN_ENABLE (1 << 0) 16 #define CODA_REG_BIT_CODE_DOWN 0x004 17 #define CODA_DOWN_ADDRESS_SET(x) (((x) & 0xffff) << 16) 18 #define CODA_DOWN_DATA_SET(x) ((x) & 0xffff) 19 #define CODA_REG_BIT_HOST_IN_REQ 0x008 20 #define CODA_REG_BIT_INT_CLEAR 0x00c 21 #define CODA_REG_BIT_INT_CLEAR_SET 0x1 22 #define CODA_REG_BIT_INT_STATUS 0x010 23 #define CODA_REG_BIT_CODE_RESET 0x014 [all …]
|
| /linux/drivers/clk/renesas/ |
| H A D | r9a07g043-cpg.c | 18 #define CPG_PL2SDHI_DSEL (0x218) 21 #define SEL_SDHI0 SEL_PLL_PACK(CPG_PL2SDHI_DSEL, 0, 2) 74 {0, 1}, 78 {0, 0}, 82 {0, 1}, 87 {0, 0}, 106 DEF_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, PLL146_CONF(0)), 151 mtable_sdhi, 0, rzg2l_cpg_sd_clk_mux_notifier), 153 mtable_sdhi, 0, rzg2l_cpg_sd_clk_mux_notifier), 167 0x514, 0, MSTOP(BUS_REG1, BIT(7))), [all …]
|
| /linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx35-pinfunc.h | 13 #define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0 14 #define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0 15 #define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0 16 #define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0 17 #define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0 18 #define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0 19 #define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0 20 #define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0 21 #define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0 22 #define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0 [all …]
|
| H A D | imx6sl-pinfunc.h | 13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 [all …]
|
| /linux/drivers/net/wireless/realtek/rtlwifi/rtl8192se/ |
| H A D | table.c | 7 0x01c, 0x07000000, 8 0x800, 0x00040000, 9 0x804, 0x00008003, 10 0x808, 0x0000fc00, 11 0x80c, 0x0000000a, 12 0x810, 0x10005088, 13 0x814, 0x020c3d10, 14 0x818, 0x00200185, 15 0x81c, 0x00000000, 16 0x820, 0x01000000, [all …]
|
| /linux/drivers/video/fbdev/ |
| H A D | platinumfb.h | 54 * F = 14.3MHz * c0 / (c1 & 0x1f) / (1 << (c1 >> 5)) 55 * Newer ones use the values in clocksel[0], for which the formula 57 * F = 15MHz * c0 / ((c1 & 0x1f) + 2) / (1 << (c1 >> 5)) 69 #define DIV2 0x20 70 #define DIV4 0x40 71 #define DIV8 0x60 72 #define DIV16 0x80 76 0x5c00, 78 { 0xffc, 4, 0, 0, 0, 0, 0x428, 0, 79 0, 0xb3, 0xd3, 0x12, 0x1a5, 0x23, 0x28, 0x2d, [all …]
|
| /linux/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/ |
| H A D | table.c | 6 0x800, 0x80040000, 7 0x804, 0x00000003, 8 0x808, 0x0000FC00, 9 0x80C, 0x0000000A, 10 0x810, 0x10001331, 11 0x814, 0x020C3D10, 12 0x818, 0x02200385, 13 0x81C, 0x00000000, 14 0x820, 0x01000100, 15 0x824, 0x00390204, [all …]
|