/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6ul-phytec-segin-peb-av-02.dtsi | 11 brightness-levels = <0 4 8 16 32 64 128 255>; 14 pwms = <&pwm3 0 5000000 0>; 33 pinctrl-0 = <&pinctrl_backlight_en>; 45 reg = <0x38>; 47 pinctrl-0 = <&pinctrl_edt_ft5406>; 56 reg = <0x44>; 58 pinctrl-0 = <&pinctrl_stmpe>; 68 st,ref-sel = <0>; 83 pinctrl-0 = <&pinctrl_lcdif_dat>; 95 pinctrl-0 = <&pinctrl_pwm3>; [all …]
|
H A D | imx7d-sdb.dts | 24 reg = <0x80000000 0x80000000>; 30 pinctrl-0 = <&pinctrl_gpio_keys>; 50 pinctrl-0 = <&pinctrl_spi4>; 56 #size-cells = <0>; 58 extended_io: gpio-expander@0 { 62 reg = <0>; 92 pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>; 112 pinctrl-0 = <&pinctrl_brcm_reg>; 130 pinctrl-0 = <&pinctrl_flexcan2_reg>; 140 pinctrl-0 = <&pinctrl_enet2_reg>; [all …]
|
H A D | imx7d-meerkat96.dts | 20 reg = <0x80000000 0x20000000>; /* 512MB */ 26 pinctrl-0 = <&pinctrl_wlreg_on>; 63 pinctrl-0 = <&pinctrl_gpio_leds>; 96 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; 112 pinctrl-0 = <&pinctrl_i2c1>; 118 pinctrl-0 = <&pinctrl_i2c2>; 124 pinctrl-0 = <&pinctrl_i2c3>; 130 pinctrl-0 = <&pinctrl_i2c4>; 136 pinctrl-0 = <&pinctrl_lcdif>; 142 pinctrl-0 = <&pinctrl_uart1>; [all …]
|
H A D | imx7d-zii-rmu2.dts | 24 pinctrl-0 = <&pinctrl_leds_debug>; 41 pinctrl-0 = <&pinctrl_ecspi1>; 45 flash@0 { 48 reg = <0>; 56 pinctrl-0 = <&pinctrl_enet1>; 60 assigned-clock-rates = <0>, <100000000>; 67 #size-cells = <0>; 69 fec1_phy: ethernet-phy@0 { 71 pinctrl-0 = <&pinctrl_enet1_phy_reset>, 73 reg = <0>; [all …]
|
H A D | imx7d-pico.dtsi | 12 pwms = <&pwm4 0 50000 0>; 13 brightness-levels = <0 36 72 108 144 180 216 255>; 20 reg = <0x80000000 0>; 38 pinctrl-0 = <&pinctrl_reg_lcdreg_on>; 49 pinctrl-0 = <&pinctrl_reg_wlreg_on>; 75 pinctrl-0 = <&pinctrl_usbotg1_pwr>; 108 assigned-clock-rates = <0>, <32768>; 122 pinctrl-0 = <&pinctrl_ecspi3>; 128 pinctrl-0 = <&pinctrl_enet1>; 132 assigned-clock-rates = <0>, <100000000>; [all …]
|
H A D | imx7d-nitrogen7.dts | 16 reg = <0x80000000 0x40000000>; 22 pinctrl-0 = <&pinctrl_backlight_j9>; 29 pwms = <&pwm1 0 5000000 0>; 30 brightness-levels = <0 4 8 16 32 64 128 255>; 117 assigned-clock-rates = <0>, <32768>; 130 pinctrl-0 = <&pinctrl_enet1>; 134 assigned-clock-rates = <0>, <100000000>; 142 #size-cells = <0>; 152 pinctrl-0 = <&pinctrl_flexcan2>; 159 pinctrl-0 = <&pinctrl_i2c1>; [all …]
|
H A D | imx7d-sbc-imx7.dts | 22 pinctrl-0 = <&pinctrl_usdhc1>; 23 cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; 32 MX7D_PAD_SD1_CMD__SD1_CMD 0x59 33 MX7D_PAD_SD1_CLK__SD1_CLK 0x19 34 MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 35 MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 36 MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 37 MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 38 MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ 39 MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
|
H A D | imx7s-warp.dts | 18 reg = <0x80000000 0x20000000>; 23 pinctrl-0 = <&pinctrl_gpio>; 39 pinctrl-0 = <&pinctrl_brcm_reg>; 49 pinctrl-0 = <&pinctrl_bt_reg>; 94 pinctrl-0 = <&pinctrl_i2c1>; 99 reg = <0x08>; 193 pinctrl-0 = <&pinctrl_i2c2>; 199 pinctrl-0 = <&pinctrl_ov2680>; 200 reg = <0x36>; 211 clock-lanes = <0>; [all …]
|
H A D | imx7d-zii-rpu2.dts | 24 #clock-cells = <0>; 30 #clock-cells = <0>; 31 clock-frequency = <0>; 36 pinctrl-0 = <&pinctrl_leds_debug>; 48 io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, 55 pinctrl-0 = <&pinctrl_flexcan1_stby>; 66 pinctrl-0 = <&pinctrl_flexcan2_stby>; 195 pinctrl-0 = <&pinctrl_ecspi1>; 199 flash@0 { 202 reg = <0>; [all …]
|
H A D | imx7d-remarkable2.dts | 23 reg = <0x80000000 0x40000000>; 54 pinctrl-0 = <&pinctrl_brcm_reg>; 66 pinctrl-0 = <&pinctrl_digitizer_reg>; 79 pinctrl-0 = <&pinctrl_touch_reg>; 87 pinctrl-0 = <&pinctrl_wifi>; 102 assigned-clock-rates = <0>, <32768>; 108 pinctrl-0 = <&pinctrl_i2c1>; 113 reg = <0x09>; 114 hid-descr-addr = <0x01>; 116 pinctrl-0 = <&pinctrl_wacom>; [all …]
|
H A D | imx7d-smegw01.dts | 31 reg = <0x80000000 0x20000000>; 37 pinctrl-0 = <&pinctrl_lte_on>; 49 pinctrl-0 = <&pinctrl_lte_nreset>; 63 pinctrl-0 = <&pinctrl_wifi>; 72 pinctrl-0 = <&pinctrl_rfkill>; 84 pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; 95 pinctrl-0 = <&pinctrl_ecspi1>; 99 sram@0 { 101 reg = <0>; 108 pinctrl-0 = <&pinctrl_enet1>; [all …]
|
H A D | imx7d-cl-som-imx7.dts | 23 reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ 46 pinctrl-0 = <&pinctrl_enet1>; 50 assigned-clock-rates = <0>, <100000000>; 58 #size-cells = <0>; 60 ethphy0: ethernet-phy@0 { 62 reg = <0>; 74 pinctrl-0 = <&pinctrl_enet2>; 78 assigned-clock-rates = <0>, <100000000>; 87 pinctrl-0 = <&pinctrl_i2c2>; 92 reg = <0x8>; [all …]
|
H A D | imx7-tqma7.dtsi | 14 reg = <0x80000000 0x20000000>; 34 pinctrl-0 = <&pinctrl_i2c1>; 43 pinctrl-0 = <&pinctrl_pmic1>; 45 reg = <0x08>; 137 reg = <0x48>; 143 reg = <0x1e>; 150 reg = <0x50>; 158 reg = <0x56>; 166 reg = <0x68>; 173 <MX7D_PAD_I2C1_SDA__I2C1_SDA 0x40000078>, [all …]
|
H A D | imx7-colibri.dtsi | 15 brightness-levels = <0 45 63 88 119 158 203 255>; 20 pinctrl-0 = <&pinctrl_gpio_bl_on>; 22 pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>; 34 pinctrl-0 = <&pinctrl_usbc_det>; 40 pinctrl-0 = <&pinctrl_gpiokeys>; 111 pinctrl-0 = <&pinctrl_usbh_reg>; 151 pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>; 157 assigned-clock-rates = <0>, <100000000>; 170 pinctrl-0 = <&pinctrl_enet1>; 175 #size-cells = <0>; [all …]
|
/linux/drivers/scsi/aic7xxx/ |
H A D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78, 10 0x00, 0xea, 0x6e, 0x59, 11 0x01, 0xea, 0x04, 0x30, 12 0xff, 0x04, 0x0c, 0x78, 13 0x19, 0xea, 0x6e, 0x59, 14 0x19, 0xea, 0x04, 0x00, 15 0x33, 0xea, 0x68, 0x59, 16 0x33, 0xea, 0x00, 0x00, 17 0x60, 0x3a, 0x3a, 0x68, 18 0x04, 0x4d, 0x35, 0x78, [all …]
|
/linux/drivers/net/wireless/intersil/p54/ |
H A D | p54spi_eeprom.h | 19 0x47, 0x4d, 0x55, 0xaa, /* magic */ 20 0x00, 0x00, /* pad */ 21 0x00, 0x00, /* eeprom_pda_data_wrap length */ 22 0x00, 0x00, 0x00, 0x00, /* arm opcode */ 25 0x04, 0x00, 0x01, 0x01, /* PDR_MAC_ADDRESS */ 26 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee, 29 0x06, 0x00, 0x01, 0x10, /* PDR_INTERFACE_LIST */ 30 0x00, 0x00, /* role */ 31 0x0f, 0x00, /* if_id */ 32 0x85, 0x00, /* variant = Longbow RF, 2GHz */ [all …]
|
/linux/lib/crypto/ |
H A D | aesgcm.c | 43 * Returns: 0 on success, or -EINVAL if @keysize or @authsize contain values 60 return 0; in aesgcm_expandkey() 67 while (len > 0) { in aesgcm_ghash() 114 while (len > 0) { in aesgcm_crypt() 222 "\xa5\x59\x09\xc5\xaf\xf5\x26\x9a" 238 "\x3d\x58\xe0\x91\x47\x3f\x59\x85" 244 "\xa5\x59\x09\xc5\xaf\xf5\x26\x9a" 276 "\xa5\x59\x09\xc5\xaf\xf5\x26\x9a" 308 "\xa5\x59\x09\xc5\xaf\xf5\x26\x9a" 321 "\x8c\xb0\x8e\x48\x59\x0d\xbb\x3d" [all …]
|
H A D | blake2s-selftest.c | 28 * for (i = 0; i < len; i++) { 29 * if (i && (i % 12) == 0) 31 * printf("0x%02x, ", vec[i]); 43 * key[0] = key[1] = 1; 47 * for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i) 52 * for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i) { 62 * return 0; 66 { 0xa1, }, 67 { 0x7c, 0x89, }, 68 { 0x74, 0x0e, 0xd4, }, [all …]
|
/linux/drivers/gpu/drm/panel/ |
H A D | panel-samsung-db7430.c | 24 #define DB7430_ACCESS_PROT_OFF 0xb0 25 #define DB7430_UNKNOWN_B4 0xb4 26 #define DB7430_USER_SELECT 0xb5 27 #define DB7430_UNKNOWN_B7 0xb7 28 #define DB7430_UNKNOWN_B8 0xb8 29 #define DB7430_PANEL_DRIVING 0xc0 30 #define DB7430_SOURCE_CONTROL 0xc1 31 #define DB7430_GATE_INTERFACE 0xc4 32 #define DB7430_DISPLAY_H_TIMING 0xc5 33 #define DB7430_RGB_SYNC_OPTION 0xc6 [all …]
|
/linux/tools/perf/pmu-events/arch/x86/amdzen3/ |
H A D | memory.json | 4 "EventCode": "0x24", 7 "UMask": "0x02" 11 "EventCode": "0x25", 13 "UMask": "0x08" 17 "EventCode": "0x25", 19 "UMask": "0x04" 23 "EventCode": "0x25", 25 "UMask": "0x02" 29 "EventCode": "0x25", 31 "UMask": "0x01" [all …]
|
/linux/tools/perf/pmu-events/arch/x86/amdzen2/ |
H A D | memory.json | 4 "EventCode": "0x24", 7 "UMask": "0x02" 11 "EventCode": "0x25", 13 "UMask": "0x08" 17 "EventCode": "0x25", 19 "UMask": "0x04" 23 "EventCode": "0x25", 25 "UMask": "0x02" 29 "EventCode": "0x25", 31 "UMask": "0x01" [all …]
|
/linux/Documentation/devicetree/bindings/nvmem/ |
H A D | socionext,uniphier-efuse.yaml | 34 reg = <0x100 0x28>; 39 reg = <0x200 0x68>; 45 reg = <0x54 1>; 49 reg = <0x55 1>; 53 reg = <0x58 1>; 57 reg = <0x59 1>; 60 usb_sel_t0: trim@54,0 { 61 reg = <0x54 1>; 62 bits = <0 4>; 64 usb_sel_t1: trim@55,0 { [all …]
|
/linux/tools/perf/pmu-events/arch/x86/amdzen4/ |
H A D | cache.json | 4 "EventCode": "0x41", 6 "UMask": "0x3f" 10 "EventCode": "0x41", 12 "UMask": "0x40" 16 "EventCode": "0x41", 18 "UMask": "0x7f" 22 "EventCode": "0x43", 24 "UMask": "0x01" 28 "EventCode": "0x43", 30 "UMask": "0x02" [all …]
|
/linux/drivers/media/i2c/ |
H A D | saa7110.c | 33 module_param(debug, int, 0); 34 MODULE_PARM_DESC(debug, "Debug level (0-1)"); 39 #define SAA7110_NR_REG 0x35 97 if (ret < 0) in saa7110_write_block() 116 #define FRESP_06H_COMPST 0x03 /*0x13*/ 117 #define FRESP_06H_SVIDEO 0x83 /*0xC0*/ 123 /* mode 0 */ in saa7110_selmux() 124 {FRESP_06H_COMPST, 0xD9, 0x17, 0x40, 0x03, in saa7110_selmux() 125 0x44, 0x75, 0x16}, in saa7110_selmux() 127 {FRESP_06H_COMPST, 0xD8, 0x17, 0x40, 0x03, in saa7110_selmux() [all …]
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | fsl,imx7d-pinctrl.yaml | 94 reg = <0x30330000 0x10000>; 98 <0x0160 0x03D0 0x0714 0x1 0x0 0x7e>, 99 <0x0164 0x03D4 0x0000 0x1 0x0 0x76>; 105 reg = <0x302c0000 0x10000>; 110 <0x0008 0x0038 0x0000 0x0 0x0 0x59>, 111 <0x000C 0x003C 0x0000 0x0 0x0 0x59>;
|