/freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
H A D | fsl,imx6ul-pinctrl.yaml | 61 PAD_CTL_PUS_100K_DOWN (0 << 14) 68 PAD_CTL_SPEED_LOW (0 << 6) 71 PAD_CTL_DSE_DISABLE (0 << 3) 79 PAD_CTL_SRE_FAST (1 << 0) 80 PAD_CTL_SRE_SLOW (0 << 0) 97 reg = <0x020e0000 0x4000>; 101 0x0084 0x0310 0x0000 0 0 0x1b0b1 102 0x0088 0x0314 0x0624 0 3 0x1b0b1 109 reg = <0x02290000 0x4000>; 113 0x0010 0x0054 0x0000 0x5 0x0 0x130b0
|
/freebsd/share/i18n/csmapper/ISO-8859/ |
H A D | ISO-8859-6%UCS.src | 5 SRC_ZONE 0x00-0xFF 7 DST_ILSEQ 0xFFFE 44 # Column #1 is the ISO/IEC 8859-6 code (in hex as 0xXX) 45 # Column #2 is the Unicode (in hex as 0xXXXX) 53 # 0x30..0x39 remapped to the ASCII digits (U+0030..U+0039) instead 63 0x00-0x7F = 0x00- 64 0x80 = 0x0080 65 0x81 = 0x0081 66 0x82 = 0x0082 67 0x83 = 0x0083 [all …]
|
H A D | UCS%ISO-8859-6.src | 5 SRC_ZONE 0x0000-0xFFEC 7 DST_INVALID 0x100 44 # Column #1 is the ISO/IEC 8859-6 code (in hex as 0xXX) 45 # Column #2 is the Unicode (in hex as 0xXXXX) 53 # 0x30..0x39 remapped to the ASCII digits (U+0030..U+0039) instead 63 0x0000-0x007F = 0x00- 64 0x0080 = 0x80 65 0x0081 = 0x81 66 0x0082 = 0x82 67 0x0083 = 0x83 [all …]
|
/freebsd/share/i18n/csmapper/CP/ |
H A D | UCS%CP420.src | 5 SRC_ZONE 0x0000 - 0xFEFC 7 DST_INVALID 0xFA 14 0x0000 = 0x00 15 0x0001 = 0x01 16 0x0002 = 0x02 17 0x0003 = 0x03 18 0x0004 = 0x04 19 0x0005 = 0x05 20 0x0006 = 0x06 21 0x0007 = 0x07 [all …]
|
H A D | CP420%UCS.src | 5 SRC_ZONE 0x00 - 0xFF 7 DST_ILSEQ 0xFFFE 14 0x00 = 0x0000 15 0x01 = 0x0001 16 0x02 = 0x0002 17 0x03 = 0x0003 18 0x04 = 0x0004 19 0x05 = 0x0005 20 0x06 = 0x0006 21 0x07 = 0x0007 [all …]
|
H A D | CP1256%UCS.src | 5 SRC_ZONE 0x00-0xFF 7 DST_ILSEQ 0xFFFE 27 # Column #2 is the Unicode (in hex as 0xXXXX) 32 0x00 = 0x0000 33 0x01 = 0x0001 34 0x02 = 0x0002 35 0x03 = 0x0003 36 0x04 = 0x0004 37 0x05 = 0x0005 38 0x06 = 0x0006 [all …]
|
H A D | UCS%CP1256.src | 5 SRC_ZONE 0x0000 - 0xFFEC 7 DST_INVALID 0xFFFF 27 # Column #2 is the Unicode (in hex as 0xXXXX) 32 0x0000 = 0x0000 33 0x0001 = 0x0001 34 0x0002 = 0x0002 35 0x0003 = 0x0003 36 0x0004 = 0x0004 37 0x0005 = 0x0005 38 0x0006 = 0x0006 [all …]
|
/freebsd/tools/test/iconv/ref/ |
H A D | ISO8859-6 | 1 0x0000 = 0x0000 2 0x0001 = 0x0001 3 0x0002 = 0x0002 4 0x0003 = 0x0003 5 0x0004 = 0x0004 6 0x0005 = 0x0005 7 0x0006 = 0x0006 8 0x0007 = 0x0007 9 0x0008 = 0x0008 10 0x0009 = 0x0009 [all …]
|
H A D | CP1256 | 1 0x0000 = 0x0000 2 0x0001 = 0x0001 3 0x0002 = 0x0002 4 0x0003 = 0x0003 5 0x0004 = 0x0004 6 0x0005 = 0x0005 7 0x0006 = 0x0006 8 0x0007 = 0x0007 9 0x0008 = 0x0008 10 0x0009 = 0x0009 [all …]
|
H A D | CP1046 | 1 0x0000 = 0x0000 2 0x0001 = 0x0001 3 0x0002 = 0x0002 4 0x0003 = 0x0003 5 0x0004 = 0x0004 6 0x0005 = 0x0005 7 0x0006 = 0x0006 8 0x0007 = 0x0007 9 0x0008 = 0x0008 10 0x0009 = 0x0009 [all …]
|
H A D | CP1046-rev | 1 0x0000 = 0x0000 2 0x0001 = 0x0001 3 0x0002 = 0x0002 4 0x0003 = 0x0003 5 0x0004 = 0x0004 6 0x0005 = 0x0005 7 0x0006 = 0x0006 8 0x0007 = 0x0007 9 0x0008 = 0x0008 10 0x0009 = 0x0009 [all …]
|
H A D | ISO8859-6-rev | 1 0x0000 = 0x0000 2 0x0001 = 0x0001 3 0x0002 = 0x0002 4 0x0003 = 0x0003 5 0x0004 = 0x0004 6 0x0005 = 0x0005 7 0x0006 = 0x0006 8 0x0007 = 0x0007 9 0x0008 = 0x0008 10 0x0009 = 0x0009 [all …]
|
H A D | CP1256-rev | 1 0x0000 = 0x0000 2 0x0001 = 0x0001 3 0x0002 = 0x0002 4 0x0003 = 0x0003 5 0x0004 = 0x0004 6 0x0005 = 0x0005 7 0x0006 = 0x0006 8 0x0007 = 0x0007 9 0x0008 = 0x0008 10 0x0009 = 0x0009 [all …]
|
H A D | MACARABIC-rev | 1 0x00 = 0x00 2 0x01 = 0x01 3 0x02 = 0x02 4 0x03 = 0x03 5 0x04 = 0x04 6 0x05 = 0x05 7 0x06 = 0x06 8 0x07 = 0x07 9 0x08 = 0x08 10 0x09 = 0x09 [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imx6ul-pinfunc.h | 13 #define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 14 #define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 16 #define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 17 #define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 18 #define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 19 #define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 20 #define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 21 #define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 22 #define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 23 #define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 [all …]
|
H A D | imx6sll-pinfunc.h | 15 #define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 16 #define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 17 #define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 18 #define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 19 #define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 20 #define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 21 #define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 22 #define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 23 #define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 24 #define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 [all …]
|
H A D | imx6sx-pinfunc.h | 13 #define MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x0014 0x035C 0x07A8 0x0 0x1 14 #define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT 0x0014 0x035C 0x0000 0x1 0x0 15 #define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK 0x0014 0x035C 0x0000 0x2 0x0 16 #define MX6SX_PAD_GPIO1_IO00__CCM_WAIT 0x0014 0x035C 0x0000 0x3 0x0 17 #define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY 0x0014 0x035C 0x0000 0x4 0x0 18 #define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0 0x0014 0x035C 0x0000 0x5 0x0 19 #define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5 0x0014 0x035C 0x0000 0x6 0x0 20 #define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1 0x0014 0x035C 0x0000 0x7 0x0 21 #define MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x0018 0x0360 0x07AC 0x0 0x1 22 #define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B 0x0018 0x0360 0x0000 0x1 0x0 [all …]
|
H A D | imx7d-pinfunc.h | 14 #define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 15 #define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 16 #define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 17 #define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 18 #define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 19 #define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 20 #define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 21 #define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 22 #define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 23 #define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 [all …]
|
/freebsd/share/i18n/csmapper/APPLE/ |
H A D | FARSI%UCS.src | 4 SRC_ZONE 0x00-0xFF 6 DST_ILSEQ 0xFFFE 71 # Column #1 is the Mac OS Farsi code (in hex as 0xNN) 72 # Column #2 is the corresponding Unicode (in hex as 0xNNNN), 74 # (i.e. <LR>+0xNNNN or <RL>+0xNNNN). 82 # 0x00-0x1F and 0x7F. 95 # 0xB0-0xB9: For Mac OS Arabic these correspond to right-left 104 # Mac OS Farsi characters 0xEB-0xF2 are non-spacing/combining marks. 118 # For example, plus sign is encoded at 0x2B with a left-right 119 # attribute, and at 0xAB with a right-left attribute. However, there [all …]
|
H A D | UCS%ARABIC.src | 4 SRC_ZONE 0x0000-0xFB02 6 DST_INVALID 0x100 38 # Change standard mapping for 0xC0 from U+066D 40 # mappings for 0x25, 0x2C, 0x3B, 0x3F. Add 75 # Column #1 is the Mac OS Arabic code (in hex as 0xNN). 76 # Column #2 is the corresponding Unicode (in hex as 0xNNNN), 78 # (i.e. <LR>+0xNNNN or <RL>+0xNNNN). 86 # 0x00-0x1F and 0x7F. 104 # 0xA0 is NO-BREAK SPACE in 8859-6 and right-left SPACE in Mac OS 105 # Arabic; NO-BREAK is 0x81 in Mac OS Arabic. [all …]
|
H A D | UCS%FARSI.src | 4 SRC_ZONE 0x0000-0xF8FF 6 DST_INVALID 0x100 71 # Column #1 is the Mac OS Farsi code (in hex as 0xNN) 72 # Column #2 is the corresponding Unicode (in hex as 0xNNNN), 74 # (i.e. <LR>+0xNNNN or <RL>+0xNNNN). 82 # 0x00-0x1F and 0x7F. 95 # 0xB0-0xB9: For Mac OS Arabic these correspond to right-left 104 # Mac OS Farsi characters 0xEB-0xF2 are non-spacing/combining marks. 118 # For example, plus sign is encoded at 0x2B with a left-right 119 # attribute, and at 0xAB with a right-left attribute. However, there [all …]
|
H A D | ARABIC%UCS.src | 4 SRC_ZONE 0x00-0xFF 6 DST_ILSEQ 0xFFFE 38 # Change standard mapping for 0xC0 from U+066D 40 # mappings for 0x25, 0x2C, 0x3B, 0x3F. Add 75 # Column #1 is the Mac OS Arabic code (in hex as 0xNN). 76 # Column #2 is the corresponding Unicode (in hex as 0xNNNN), 78 # (i.e. <LR>+0xNNNN or <RL>+0xNNNN). 86 # 0x00-0x1F and 0x7F. 104 # 0xA0 is NO-BREAK SPACE in 8859-6 and right-left SPACE in Mac OS 105 # Arabic; NO-BREAK is 0x81 in Mac OS Arabic. [all …]
|
/freebsd/sys/dev/sound/pci/ |
H A D | allegro_code.h | 55 0x7980, 0x0030, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x00FB, 0x7980, 56 0x00DD, 0x7980, 0x03B4, 0x7980, 0x0332, 0x7980, 0x0287, 0x7980, 0x03B4, 57 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x031A, 0x7980, 58 0x03B4, 0x7980, 0x022F, 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x03B4, 59 0x7980, 0x03B4, 0x7980, 0x03B4, 0x7980, 0x0063, 0x7980, 0x006B, 0x7980, 60 0x03B4, 0x7980, 0x03B4, 0xBF80, 0x2C7C, 0x8806, 0x8804, 0xBE40, 0xBC20, 61 0xAE09, 0x1000, 0xAE0A, 0x0001, 0x6938, 0xEB08, 0x0053, 0x695A, 0xEB08, 62 0x00D6, 0x0009, 0x8B88, 0x6980, 0xE388, 0x0036, 0xBE30, 0xBC20, 0x6909, 63 0xB801, 0x9009, 0xBE41, 0xBE41, 0x6928, 0xEB88, 0x0078, 0xBE41, 0xBE40, 64 0x7980, 0x0038, 0xBE41, 0xBE41, 0x903A, 0x6938, 0xE308, 0x0056, 0x903A, [all …]
|
/freebsd/sys/dev/sk/ |
H A D | if_skreg.h | 54 #define SK_GENESIS 0x0A 55 #define SK_YUKON 0xB0 56 #define SK_YUKON_LITE 0xB1 57 #define SK_YUKON_LP 0xB2 58 #define SK_YUKON_FAMILY(x) ((x) & 0xB0) 61 #define SK_YUKON_LITE_REV_A0 0x0 /* invented, see test in skc_attach. */ 62 #define SK_YUKON_LITE_REV_A1 0x3 63 #define SK_YUKON_LITE_REV_A3 0x7 68 #define VENDORID_SK 0x1148 73 #define VENDORID_MARVELL 0x11AB [all …]
|
/freebsd/sys/dev/mpt/mpilib/ |
H A D | mpi_cnfg.h | 79 * New fields added to FC Port Page 0 and some flags 124 * Added rejected bits to SCSI Device Page 0 Information. 130 * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and 131 * RAID PhysDisk Page 0. 206 * Added more defines for SAS IO Unit Page 0 220 * Added AccessStatus field to SAS Device Page 0 and added 227 * Page 0. 238 * Added Unsupported device to SAS Dev Page 0 Flags field 245 * Page 0. 247 * and to SAS Device Page 0 Flags to control SATA devices. [all …]
|