xref: /linux/drivers/parisc/eisa.c (revision a1c613ae4c322ddd58d5a8539dbfba2a0380a8c0)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * eisa.c - provide support for EISA adapters in PA-RISC machines
4  *
5  * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
6  * Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
7  *
8  * There are two distinct EISA adapters.  Mongoose is found in machines
9  * before the 712; then the Wax ASIC is used.  To complicate matters, the
10  * Wax ASIC also includes a PS/2 and RS-232 controller, but those are
11  * dealt with elsewhere; this file is concerned only with the EISA portions
12  * of Wax.
13  *
14  * HINT:
15  * -----
16  * To allow an ISA card to work properly in the EISA slot you need to
17  * set an edge trigger level. This may be done on the palo command line
18  * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with
19  * n and n2 as the irq levels you want to use.
20  *
21  * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at
22  * irq levels 10 and 11.
23  */
24 
25 #include <linux/init.h>
26 #include <linux/ioport.h>
27 #include <linux/interrupt.h>
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/pci.h>
31 #include <linux/spinlock.h>
32 #include <linux/eisa.h>
33 
34 #include <asm/byteorder.h>
35 #include <asm/io.h>
36 #include <asm/hardware.h>
37 #include <asm/processor.h>
38 #include <asm/parisc-device.h>
39 #include <asm/delay.h>
40 #include <asm/eisa_bus.h>
41 #include <asm/eisa_eeprom.h>
42 
43 #include "iommu.h"
44 
45 #if 0
46 #define EISA_DBG(msg, arg...) printk(KERN_DEBUG "eisa: " msg, ## arg)
47 #else
48 #define EISA_DBG(msg, arg...)
49 #endif
50 
51 #define SNAKES_EEPROM_BASE_ADDR 0xF0810400
52 #define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400
53 
54 static DEFINE_SPINLOCK(eisa_irq_lock);
55 
56 void __iomem *eisa_eeprom_addr __read_mostly;
57 
58 /* We can only have one EISA adapter in the system because neither
59  * implementation can be flexed.
60  */
61 static struct eisa_ba {
62 	struct pci_hba_data	hba;
63 	unsigned long eeprom_addr;
64 	struct eisa_root_device root;
65 } eisa_dev;
66 
67 /* Port ops */
68 
eisa_permute(unsigned short port)69 static inline unsigned long eisa_permute(unsigned short port)
70 {
71 	if (port & 0x300) {
72 		return 0xfc000000 | ((port & 0xfc00) >> 6)
73 			| ((port & 0x3f8) << 9) | (port & 7);
74 	} else {
75 		return 0xfc000000 | port;
76 	}
77 }
78 
eisa_in8(unsigned short port)79 unsigned char eisa_in8(unsigned short port)
80 {
81 	if (EISA_bus)
82 		return gsc_readb(eisa_permute(port));
83 	return 0xff;
84 }
85 
eisa_in16(unsigned short port)86 unsigned short eisa_in16(unsigned short port)
87 {
88 	if (EISA_bus)
89 		return le16_to_cpu(gsc_readw(eisa_permute(port)));
90 	return 0xffff;
91 }
92 
eisa_in32(unsigned short port)93 unsigned int eisa_in32(unsigned short port)
94 {
95 	if (EISA_bus)
96 		return le32_to_cpu(gsc_readl(eisa_permute(port)));
97 	return 0xffffffff;
98 }
99 
eisa_out8(unsigned char data,unsigned short port)100 void eisa_out8(unsigned char data, unsigned short port)
101 {
102 	if (EISA_bus)
103 		gsc_writeb(data, eisa_permute(port));
104 }
105 
eisa_out16(unsigned short data,unsigned short port)106 void eisa_out16(unsigned short data, unsigned short port)
107 {
108 	if (EISA_bus)
109 		gsc_writew(cpu_to_le16(data), eisa_permute(port));
110 }
111 
eisa_out32(unsigned int data,unsigned short port)112 void eisa_out32(unsigned int data, unsigned short port)
113 {
114 	if (EISA_bus)
115 		gsc_writel(cpu_to_le32(data), eisa_permute(port));
116 }
117 
118 #ifndef CONFIG_PCI
119 /* We call these directly without PCI.  See asm/io.h. */
120 EXPORT_SYMBOL(eisa_in8);
121 EXPORT_SYMBOL(eisa_in16);
122 EXPORT_SYMBOL(eisa_in32);
123 EXPORT_SYMBOL(eisa_out8);
124 EXPORT_SYMBOL(eisa_out16);
125 EXPORT_SYMBOL(eisa_out32);
126 #endif
127 
128 /* Interrupt handling */
129 
130 /* cached interrupt mask registers */
131 static int master_mask;
132 static int slave_mask;
133 
134 /* the trig level can be set with the
135  * eisa_irq_edge=n,n,n commandline parameter
136  * We should really read this from the EEPROM
137  * in the furure.
138  */
139 /* irq 13,8,2,1,0 must be edge */
140 static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */
141 
142 
143 /* called by free irq */
eisa_mask_irq(struct irq_data * d)144 static void eisa_mask_irq(struct irq_data *d)
145 {
146 	unsigned int irq = d->irq;
147 	unsigned long flags;
148 
149 	EISA_DBG("disable irq %d\n", irq);
150 	/* just mask for now */
151 	spin_lock_irqsave(&eisa_irq_lock, flags);
152         if (irq & 8) {
153 		slave_mask |= (1 << (irq&7));
154 		eisa_out8(slave_mask, 0xa1);
155 	} else {
156 		master_mask |= (1 << (irq&7));
157 		eisa_out8(master_mask, 0x21);
158 	}
159 	spin_unlock_irqrestore(&eisa_irq_lock, flags);
160 	EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
161 	EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
162 }
163 
164 /* called by request irq */
eisa_unmask_irq(struct irq_data * d)165 static void eisa_unmask_irq(struct irq_data *d)
166 {
167 	unsigned int irq = d->irq;
168 	unsigned long flags;
169 	EISA_DBG("enable irq %d\n", irq);
170 
171 	spin_lock_irqsave(&eisa_irq_lock, flags);
172         if (irq & 8) {
173 		slave_mask &= ~(1 << (irq&7));
174 		eisa_out8(slave_mask, 0xa1);
175 	} else {
176 		master_mask &= ~(1 << (irq&7));
177 		eisa_out8(master_mask, 0x21);
178 	}
179 	spin_unlock_irqrestore(&eisa_irq_lock, flags);
180 	EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
181 	EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
182 }
183 
184 static struct irq_chip eisa_interrupt_type = {
185 	.name		=	"EISA",
186 	.irq_unmask	=	eisa_unmask_irq,
187 	.irq_mask	=	eisa_mask_irq,
188 };
189 
eisa_irq(int wax_irq,void * intr_dev)190 static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
191 {
192 	int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
193 	unsigned long flags;
194 
195 	spin_lock_irqsave(&eisa_irq_lock, flags);
196 	/* read IRR command */
197 	eisa_out8(0x0a, 0x20);
198 	eisa_out8(0x0a, 0xa0);
199 
200 	EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
201 		   irq, eisa_in8(0x20), eisa_in8(0xa0));
202 
203 	/* read ISR command */
204 	eisa_out8(0x0a, 0x20);
205 	eisa_out8(0x0a, 0xa0);
206 	EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
207 		 eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
208 
209 	irq &= 0xf;
210 
211 	/* mask irq and write eoi */
212 	if (irq & 8) {
213 		slave_mask |= (1 << (irq&7));
214 		eisa_out8(slave_mask, 0xa1);
215 		eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
216 		eisa_out8(0x62, 0x20);	/* 'Specific EOI' to master-IRQ2 */
217 
218 	} else {
219 		master_mask |= (1 << (irq&7));
220 		eisa_out8(master_mask, 0x21);
221 		eisa_out8(0x60|irq, 0x20);	/* 'Specific EOI' to master */
222 	}
223 	spin_unlock_irqrestore(&eisa_irq_lock, flags);
224 
225 	generic_handle_irq(irq);
226 
227 	spin_lock_irqsave(&eisa_irq_lock, flags);
228 	/* unmask */
229         if (irq & 8) {
230 		slave_mask &= ~(1 << (irq&7));
231 		eisa_out8(slave_mask, 0xa1);
232 	} else {
233 		master_mask &= ~(1 << (irq&7));
234 		eisa_out8(master_mask, 0x21);
235 	}
236 	spin_unlock_irqrestore(&eisa_irq_lock, flags);
237 	return IRQ_HANDLED;
238 }
239 
dummy_irq2_handler(int _,void * dev)240 static irqreturn_t dummy_irq2_handler(int _, void *dev)
241 {
242 	printk(KERN_ALERT "eisa: uhh, irq2?\n");
243 	return IRQ_HANDLED;
244 }
245 
init_eisa_pic(void)246 static void init_eisa_pic(void)
247 {
248 	unsigned long flags;
249 
250 	spin_lock_irqsave(&eisa_irq_lock, flags);
251 
252 	eisa_out8(0xff, 0x21); /* mask during init */
253 	eisa_out8(0xff, 0xa1); /* mask during init */
254 
255 	/* master pic */
256 	eisa_out8(0x11, 0x20); /* ICW1 */
257 	eisa_out8(0x00, 0x21); /* ICW2 */
258 	eisa_out8(0x04, 0x21); /* ICW3 */
259 	eisa_out8(0x01, 0x21); /* ICW4 */
260 	eisa_out8(0x40, 0x20); /* OCW2 */
261 
262 	/* slave pic */
263 	eisa_out8(0x11, 0xa0); /* ICW1 */
264 	eisa_out8(0x08, 0xa1); /* ICW2 */
265 	eisa_out8(0x02, 0xa1); /* ICW3 */
266 	eisa_out8(0x01, 0xa1); /* ICW4 */
267 	eisa_out8(0x40, 0xa0); /* OCW2 */
268 
269 	udelay(100);
270 
271 	slave_mask = 0xff;
272 	master_mask = 0xfb;
273 	eisa_out8(slave_mask, 0xa1); /* OCW1 */
274 	eisa_out8(master_mask, 0x21); /* OCW1 */
275 
276 	/* setup trig level */
277 	EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
278 
279 	eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge  */
280 	eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1);
281 
282 	EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
283 	EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
284 	EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
285 	EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
286 
287 	spin_unlock_irqrestore(&eisa_irq_lock, flags);
288 }
289 
290 /* Device initialisation */
291 
292 #define is_mongoose(dev) (dev->id.sversion == 0x00076)
293 
eisa_probe(struct parisc_device * dev)294 static int __init eisa_probe(struct parisc_device *dev)
295 {
296 	int i, result;
297 
298 	char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
299 
300 	printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
301 		name, (unsigned long)dev->hpa.start);
302 
303 	eisa_dev.hba.dev = dev;
304 	eisa_dev.hba.iommu = ccio_get_iommu(dev);
305 
306 	eisa_dev.hba.lmmio_space.name = "EISA";
307 	eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
308 	eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
309 	eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
310 	result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
311 	if (result < 0) {
312 		printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
313 		return result;
314 	}
315 	eisa_dev.hba.io_space.name = "EISA";
316 	eisa_dev.hba.io_space.start = 0;
317 	eisa_dev.hba.io_space.end = 0xffff;
318 	eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
319 	result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
320 	if (result < 0) {
321 		printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
322 		return result;
323 	}
324 	pcibios_register_hba(&eisa_dev.hba);
325 
326 	result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
327 	if (result) {
328 		printk(KERN_ERR "EISA: request_irq failed!\n");
329 		goto error_release;
330 	}
331 
332 	/* Reserve IRQ2 */
333 	if (request_irq(2, dummy_irq2_handler, 0, "cascade", NULL))
334 		pr_err("Failed to request irq 2 (cascade)\n");
335 	for (i = 0; i < 16; i++) {
336 		irq_set_chip_and_handler(i, &eisa_interrupt_type,
337 					 handle_simple_irq);
338 	}
339 
340 	EISA_bus = 1;
341 
342 	if (dev->num_addrs) {
343 		/* newer firmware hand out the eeprom address */
344 		eisa_dev.eeprom_addr = dev->addr[0];
345 	} else {
346 		/* old firmware, need to figure out the box */
347 		if (is_mongoose(dev)) {
348 			eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
349 		} else {
350 			eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
351 		}
352 	}
353 	eisa_eeprom_addr = ioremap(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
354 	if (!eisa_eeprom_addr) {
355 		result = -ENOMEM;
356 		printk(KERN_ERR "EISA: ioremap failed!\n");
357 		goto error_free_irq;
358 	}
359 	result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
360 			&eisa_dev.hba.lmmio_space);
361 	init_eisa_pic();
362 
363 	if (result >= 0) {
364 		/* FIXME : Don't enumerate the bus twice. */
365 		eisa_dev.root.dev = &dev->dev;
366 		dev_set_drvdata(&dev->dev, &eisa_dev.root);
367 		eisa_dev.root.bus_base_addr = 0;
368 		eisa_dev.root.res = &eisa_dev.hba.io_space;
369 		eisa_dev.root.slots = result;
370 		eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
371 		if (eisa_root_register (&eisa_dev.root)) {
372 			printk(KERN_ERR "EISA: Failed to register EISA root\n");
373 			result = -ENOMEM;
374 			goto error_iounmap;
375 		}
376 	}
377 
378 	return 0;
379 
380 error_iounmap:
381 	iounmap(eisa_eeprom_addr);
382 error_free_irq:
383 	free_irq(dev->irq, &eisa_dev);
384 error_release:
385 	release_resource(&eisa_dev.hba.io_space);
386 	return result;
387 }
388 
389 static const struct parisc_device_id eisa_tbl[] __initconst = {
390 	{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
391 	{ HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
392 	{ 0, }
393 };
394 
395 MODULE_DEVICE_TABLE(parisc, eisa_tbl);
396 
397 static struct parisc_driver eisa_driver __refdata = {
398 	.name =		"eisa_ba",
399 	.id_table =	eisa_tbl,
400 	.probe =	eisa_probe,
401 };
402 
parisc_eisa_init(void)403 static int __init parisc_eisa_init(void)
404 {
405 	return register_parisc_driver(&eisa_driver);
406 }
407 arch_initcall(parisc_eisa_init);
408 
409 
410 static unsigned int eisa_irq_configured;
eisa_make_irq_level(int num)411 void eisa_make_irq_level(int num)
412 {
413 	if (eisa_irq_configured& (1<<num)) {
414 		printk(KERN_WARNING
415 		       "IRQ %d polarity configured twice (last to level)\n",
416 		       num);
417 	}
418 	eisa_irq_level |= (1<<num); /* set the corresponding bit */
419 	eisa_irq_configured |= (1<<num); /* set the corresponding bit */
420 }
421 
eisa_make_irq_edge(int num)422 void eisa_make_irq_edge(int num)
423 {
424 	if (eisa_irq_configured& (1<<num)) {
425 		printk(KERN_WARNING
426 		       "IRQ %d polarity configured twice (last to edge)\n",
427 		       num);
428 	}
429 	eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
430 	eisa_irq_configured |= (1<<num); /* set the corresponding bit */
431 }
432 
eisa_irq_setup(char * str)433 static int __init eisa_irq_setup(char *str)
434 {
435 	char *cur = str;
436 	int val;
437 
438 	EISA_DBG("IRQ setup\n");
439 	while (cur != NULL) {
440 		char *pe;
441 
442 		val = (int) simple_strtoul(cur, &pe, 0);
443 		if (val > 15 || val < 0) {
444 			printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
445 			continue;
446 		}
447 		if (val == 2) {
448 			val = 9;
449 		}
450 		eisa_make_irq_edge(val); /* clear the corresponding bit */
451 		EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
452 
453 		if ((cur = strchr(cur, ','))) {
454 			cur++;
455 		} else {
456 			break;
457 		}
458 	}
459 	return 1;
460 }
461 
462 __setup("eisa_irq_edge=", eisa_irq_setup);
463 
464