1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2004 by Thomas Rathbone, HP Labs 4 * Copyright (C) 2005 by Ivan Kokshaysky 5 * Copyright (C) 2006 by SAN People 6 */ 7 8 #ifndef AT91_UDC_H 9 #define AT91_UDC_H 10 11 /* 12 * USB Device Port (UDP) registers. 13 * Based on AT91RM9200 datasheet revision E. 14 */ 15 16 #define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */ 17 #define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */ 18 #define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */ 19 #define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */ 20 21 #define AT91_UDP_GLB_STAT 0x04 /* Global State Register */ 22 #define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */ 23 #define AT91_UDP_CONFG (1 << 1) /* Configured */ 24 #define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */ 25 #define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */ 26 #define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */ 27 28 #define AT91_UDP_FADDR 0x08 /* Function Address Register */ 29 #define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */ 30 #define AT91_UDP_FEN (1 << 8) /* Function Enable */ 31 32 #define AT91_UDP_IER 0x10 /* Interrupt Enable Register */ 33 #define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */ 34 #define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */ 35 36 #define AT91_UDP_ISR 0x1c /* Interrupt Status Register */ 37 #define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */ 38 #define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */ 39 #define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */ 40 #define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */ 41 #define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */ 42 #define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */ 43 #define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */ 44 45 #define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */ 46 #define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */ 47 48 #define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */ 49 #define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */ 50 #define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */ 51 #define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */ 52 #define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */ 53 #define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */ 54 #define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */ 55 #define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */ 56 #define AT91_UDP_DIR (1 << 7) /* Transfer Direction */ 57 #define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */ 58 #define AT91_UDP_EPTYPE_CTRL (0 << 8) 59 #define AT91_UDP_EPTYPE_ISO_OUT (1 << 8) 60 #define AT91_UDP_EPTYPE_BULK_OUT (2 << 8) 61 #define AT91_UDP_EPTYPE_INT_OUT (3 << 8) 62 #define AT91_UDP_EPTYPE_ISO_IN (5 << 8) 63 #define AT91_UDP_EPTYPE_BULK_IN (6 << 8) 64 #define AT91_UDP_EPTYPE_INT_IN (7 << 8) 65 #define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */ 66 #define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */ 67 #define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */ 68 69 #define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */ 70 71 #define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */ 72 #define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */ 73 #define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */ 74 75 /*-------------------------------------------------------------------------*/ 76 77 /* 78 * controller driver data structures 79 */ 80 81 #define NUM_ENDPOINTS 6 82 83 /* 84 * hardware won't disable bus reset, or resume while the controller 85 * is suspended ... watching suspend helps keep the logic symmetric. 86 */ 87 #define MINIMUS_INTERRUPTUS \ 88 (AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP) 89 90 struct at91_ep { 91 struct usb_ep ep; 92 struct list_head queue; 93 struct at91_udc *udc; 94 void __iomem *creg; 95 96 unsigned maxpacket:16; 97 u8 int_mask; 98 unsigned is_pingpong:1; 99 100 unsigned stopped:1; 101 unsigned is_in:1; 102 unsigned is_iso:1; 103 unsigned fifo_bank:1; 104 }; 105 106 struct at91_udc_caps { 107 int (*init)(struct at91_udc *udc); 108 void (*pullup)(struct at91_udc *udc, int is_on); 109 }; 110 111 struct at91_udc_data { 112 struct gpio_desc *vbus_pin; /* high == host powering us */ 113 u8 vbus_polled; /* Use polling, not interrupt */ 114 struct gpio_desc *pullup_pin; /* active == D+ pulled up */ 115 }; 116 117 /* 118 * driver is non-SMP, and just blocks IRQs whenever it needs 119 * access protection for chip registers or driver state 120 */ 121 struct at91_udc { 122 struct usb_gadget gadget; 123 struct at91_ep ep[NUM_ENDPOINTS]; 124 struct usb_gadget_driver *driver; 125 const struct at91_udc_caps *caps; 126 unsigned vbus:1; 127 unsigned enabled:1; 128 unsigned clocked:1; 129 unsigned suspended:1; 130 unsigned req_pending:1; 131 unsigned wait_for_addr_ack:1; 132 unsigned wait_for_config_ack:1; 133 unsigned active_suspend:1; 134 u8 addr; 135 struct at91_udc_data board; 136 struct clk *iclk, *fclk; 137 struct platform_device *pdev; 138 struct proc_dir_entry *pde; 139 void __iomem *udp_baseaddr; 140 int udp_irq; 141 spinlock_t lock; 142 struct timer_list vbus_timer; 143 struct work_struct vbus_timer_work; 144 struct regmap *matrix; 145 }; 146 to_udc(struct usb_gadget * g)147static inline struct at91_udc *to_udc(struct usb_gadget *g) 148 { 149 return container_of(g, struct at91_udc, gadget); 150 } 151 152 struct at91_request { 153 struct usb_request req; 154 struct list_head queue; 155 }; 156 157 /*-------------------------------------------------------------------------*/ 158 159 #ifdef VERBOSE_DEBUG 160 # define VDBG DBG 161 #else 162 # define VDBG(stuff...) do{}while(0) 163 #endif 164 165 #ifdef PACKET_TRACE 166 # define PACKET VDBG 167 #else 168 # define PACKET(stuff...) do{}while(0) 169 #endif 170 171 #define ERR(stuff...) pr_err("udc: " stuff) 172 #define WARNING(stuff...) pr_warn("udc: " stuff) 173 #define INFO(stuff...) pr_info("udc: " stuff) 174 #define DBG(stuff...) pr_debug("udc: " stuff) 175 176 #endif 177 178