1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
4 *
5 * Copyright (C) 2012-2013 Texas Instruments Incorporated - https://www.ti.com
6 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
7 * Author: Roger Quadros <rogerq@ti.com>
8 */
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/slab.h>
13 #include <linux/spinlock.h>
14 #include <linux/platform_device.h>
15 #include <linux/clk.h>
16 #include <linux/io.h>
17 #include <linux/err.h>
18 #include <linux/pm_runtime.h>
19 #include <linux/platform_data/usb-omap.h>
20 #include <linux/of.h>
21
22 #include "omap-usb.h"
23
24 #define USBTLL_DRIVER_NAME "usbhs_tll"
25
26 /* TLL Register Set */
27 #define OMAP_USBTLL_REVISION (0x00)
28 #define OMAP_USBTLL_SYSCONFIG (0x10)
29 #define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
30 #define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
31 #define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
32 #define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
33 #define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
34
35 #define OMAP_USBTLL_SYSSTATUS (0x14)
36 #define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
37
38 #define OMAP_USBTLL_IRQSTATUS (0x18)
39 #define OMAP_USBTLL_IRQENABLE (0x1C)
40
41 #define OMAP_TLL_SHARED_CONF (0x30)
42 #define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
43 #define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
44 #define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
45 #define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
46 #define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
47
48 #define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
49 #define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24
50 #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16)
51 #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15)
52 #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
53 #define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
54 #define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
55 #define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
56 #define OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI (2 << 1)
57 #define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1)
58 #define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
59
60 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0
61 #define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1
62 #define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2
63 #define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3
64 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4
65 #define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5
66 #define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6
67 #define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7
68 #define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA
69 #define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB
70
71 #define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
72 #define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
73 #define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
74 #define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
75 #define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
76 #define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
77 #define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
78 #define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
79 #define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
80
81 #define OMAP_REV2_TLL_CHANNEL_COUNT 2
82 #define OMAP_TLL_CHANNEL_COUNT 3
83 #define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0)
84 #define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1)
85 #define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2)
86
87 /* Values of USBTLL_REVISION - Note: these are not given in the TRM */
88 #define OMAP_USBTLL_REV1 0x00000015 /* OMAP3 */
89 #define OMAP_USBTLL_REV2 0x00000018 /* OMAP 3630 */
90 #define OMAP_USBTLL_REV3 0x00000004 /* OMAP4 */
91 #define OMAP_USBTLL_REV4 0x00000006 /* OMAP5 */
92
93 #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
94
95 /* only PHY and UNUSED modes don't need TLL */
96 #define omap_usb_mode_needs_tll(x) ((x) != OMAP_USBHS_PORT_MODE_UNUSED &&\
97 (x) != OMAP_EHCI_PORT_MODE_PHY)
98
99 struct usbtll_omap {
100 void __iomem *base;
101 int nch;
102 struct clk *ch_clk[] __counted_by(nch);
103 };
104
105 /*-------------------------------------------------------------------------*/
106
107 static const char usbtll_driver_name[] = USBTLL_DRIVER_NAME;
108 static struct device *tll_dev;
109 static DEFINE_SPINLOCK(tll_lock); /* serialize access to tll_dev */
110
111 /*-------------------------------------------------------------------------*/
112
usbtll_write(void __iomem * base,u32 reg,u32 val)113 static inline void usbtll_write(void __iomem *base, u32 reg, u32 val)
114 {
115 writel_relaxed(val, base + reg);
116 }
117
usbtll_read(void __iomem * base,u32 reg)118 static inline u32 usbtll_read(void __iomem *base, u32 reg)
119 {
120 return readl_relaxed(base + reg);
121 }
122
usbtll_writeb(void __iomem * base,u32 reg,u8 val)123 static inline void usbtll_writeb(void __iomem *base, u32 reg, u8 val)
124 {
125 writeb_relaxed(val, base + reg);
126 }
127
128 /*-------------------------------------------------------------------------*/
129
is_ohci_port(enum usbhs_omap_port_mode pmode)130 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
131 {
132 switch (pmode) {
133 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
134 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
135 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
136 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
137 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
138 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
139 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
140 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
141 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
142 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
143 return true;
144
145 default:
146 return false;
147 }
148 }
149
150 /*
151 * convert the port-mode enum to a value we can use in the FSLSMODE
152 * field of USBTLL_CHANNEL_CONF
153 */
ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)154 static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
155 {
156 switch (mode) {
157 case OMAP_USBHS_PORT_MODE_UNUSED:
158 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
159 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
160
161 case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
162 return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;
163
164 case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
165 return OMAP_TLL_FSLSMODE_3PIN_PHY;
166
167 case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
168 return OMAP_TLL_FSLSMODE_4PIN_PHY;
169
170 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
171 return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;
172
173 case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
174 return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;
175
176 case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
177 return OMAP_TLL_FSLSMODE_3PIN_TLL;
178
179 case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
180 return OMAP_TLL_FSLSMODE_4PIN_TLL;
181
182 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
183 return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;
184
185 case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
186 return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
187 default:
188 pr_warn("Invalid port mode, using default\n");
189 return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
190 }
191 }
192
193 /**
194 * usbtll_omap_probe - initialize TI-based HCDs
195 *
196 * Allocates basic resources for this USB host controller.
197 *
198 * @pdev: Pointer to this device's platform device structure
199 */
usbtll_omap_probe(struct platform_device * pdev)200 static int usbtll_omap_probe(struct platform_device *pdev)
201 {
202 struct device *dev = &pdev->dev;
203 struct usbtll_omap *tll;
204 void __iomem *base;
205 int i, nch, ver;
206
207 dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
208
209 base = devm_platform_ioremap_resource(pdev, 0);
210 if (IS_ERR(base))
211 return PTR_ERR(base);
212
213 pm_runtime_enable(dev);
214 pm_runtime_get_sync(dev);
215
216 ver = usbtll_read(base, OMAP_USBTLL_REVISION);
217 switch (ver) {
218 case OMAP_USBTLL_REV1:
219 case OMAP_USBTLL_REV4:
220 nch = OMAP_TLL_CHANNEL_COUNT;
221 break;
222 case OMAP_USBTLL_REV2:
223 case OMAP_USBTLL_REV3:
224 nch = OMAP_REV2_TLL_CHANNEL_COUNT;
225 break;
226 default:
227 nch = OMAP_TLL_CHANNEL_COUNT;
228 dev_dbg(dev, "rev 0x%x not recognized, assuming %d channels\n",
229 ver, nch);
230 break;
231 }
232
233 tll = devm_kzalloc(dev, struct_size(tll, ch_clk, nch), GFP_KERNEL);
234 if (!tll) {
235 pm_runtime_put_sync(dev);
236 pm_runtime_disable(dev);
237 return -ENOMEM;
238 }
239
240 tll->base = base;
241 tll->nch = nch;
242 platform_set_drvdata(pdev, tll);
243
244 for (i = 0; i < nch; i++) {
245 char clkname[] = "usb_tll_hs_usb_chx_clk";
246
247 snprintf(clkname, sizeof(clkname),
248 "usb_tll_hs_usb_ch%d_clk", i);
249 tll->ch_clk[i] = clk_get(dev, clkname);
250
251 if (IS_ERR(tll->ch_clk[i]))
252 dev_dbg(dev, "can't get clock : %s\n", clkname);
253 else
254 clk_prepare(tll->ch_clk[i]);
255 }
256
257 pm_runtime_put_sync(dev);
258 /* only after this can omap_tll_enable/disable work */
259 spin_lock(&tll_lock);
260 tll_dev = dev;
261 spin_unlock(&tll_lock);
262
263 return 0;
264 }
265
266 /**
267 * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
268 * @pdev: USB Host Controller being removed
269 *
270 * Reverses the effect of usbtll_omap_probe().
271 */
usbtll_omap_remove(struct platform_device * pdev)272 static void usbtll_omap_remove(struct platform_device *pdev)
273 {
274 struct usbtll_omap *tll = platform_get_drvdata(pdev);
275 int i;
276
277 spin_lock(&tll_lock);
278 tll_dev = NULL;
279 spin_unlock(&tll_lock);
280
281 for (i = 0; i < tll->nch; i++) {
282 if (!IS_ERR(tll->ch_clk[i])) {
283 clk_unprepare(tll->ch_clk[i]);
284 clk_put(tll->ch_clk[i]);
285 }
286 }
287
288 pm_runtime_disable(&pdev->dev);
289 }
290
291 static const struct of_device_id usbtll_omap_dt_ids[] = {
292 { .compatible = "ti,usbhs-tll" },
293 { }
294 };
295
296 MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
297
298 static struct platform_driver usbtll_omap_driver = {
299 .driver = {
300 .name = usbtll_driver_name,
301 .of_match_table = usbtll_omap_dt_ids,
302 },
303 .probe = usbtll_omap_probe,
304 .remove = usbtll_omap_remove,
305 };
306
omap_tll_init(struct usbhs_omap_platform_data * pdata)307 int omap_tll_init(struct usbhs_omap_platform_data *pdata)
308 {
309 int i;
310 bool needs_tll;
311 unsigned reg;
312 struct usbtll_omap *tll;
313
314 if (!tll_dev)
315 return -ENODEV;
316
317 pm_runtime_get_sync(tll_dev);
318
319 spin_lock(&tll_lock);
320 tll = dev_get_drvdata(tll_dev);
321 needs_tll = false;
322 for (i = 0; i < tll->nch; i++)
323 needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
324
325 if (needs_tll) {
326 void __iomem *base = tll->base;
327
328 /* Program Common TLL register */
329 reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
330 reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
331 | OMAP_TLL_SHARED_CONF_USB_DIVRATION);
332 reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
333 reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
334
335 usbtll_write(base, OMAP_TLL_SHARED_CONF, reg);
336
337 /* Enable channels now */
338 for (i = 0; i < tll->nch; i++) {
339 reg = usbtll_read(base, OMAP_TLL_CHANNEL_CONF(i));
340
341 if (is_ohci_port(pdata->port_mode[i])) {
342 reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
343 << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
344 reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
345 } else if (pdata->port_mode[i] ==
346 OMAP_EHCI_PORT_MODE_TLL) {
347 /*
348 * Disable UTMI AutoIdle, BitStuffing
349 * and use SDR Mode. Enable ULPI AutoIdle.
350 */
351 reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
352 | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
353 reg |= OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
354 reg |= OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE;
355 } else if (pdata->port_mode[i] ==
356 OMAP_EHCI_PORT_MODE_HSIC) {
357 /*
358 * HSIC Mode requires UTMI port configurations
359 */
360 reg |= OMAP_TLL_CHANNEL_CONF_DRVVBUS
361 | OMAP_TLL_CHANNEL_CONF_CHRGVBUS
362 | OMAP_TLL_CHANNEL_CONF_MODE_TRANSPARENT_UTMI
363 | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF;
364 } else {
365 continue;
366 }
367 reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
368 usbtll_write(base, OMAP_TLL_CHANNEL_CONF(i), reg);
369
370 usbtll_writeb(base,
371 OMAP_TLL_ULPI_SCRATCH_REGISTER(i),
372 0xbe);
373 }
374 }
375
376 spin_unlock(&tll_lock);
377 pm_runtime_put_sync(tll_dev);
378
379 return 0;
380 }
381 EXPORT_SYMBOL_GPL(omap_tll_init);
382
omap_tll_enable(struct usbhs_omap_platform_data * pdata)383 int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
384 {
385 int i;
386 struct usbtll_omap *tll;
387
388 if (!tll_dev)
389 return -ENODEV;
390
391 pm_runtime_get_sync(tll_dev);
392
393 spin_lock(&tll_lock);
394 tll = dev_get_drvdata(tll_dev);
395
396 for (i = 0; i < tll->nch; i++) {
397 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
398 int r;
399
400 if (IS_ERR(tll->ch_clk[i]))
401 continue;
402
403 r = clk_enable(tll->ch_clk[i]);
404 if (r) {
405 dev_err(tll_dev,
406 "Error enabling ch %d clock: %d\n", i, r);
407 }
408 }
409 }
410
411 spin_unlock(&tll_lock);
412
413 return 0;
414 }
415 EXPORT_SYMBOL_GPL(omap_tll_enable);
416
omap_tll_disable(struct usbhs_omap_platform_data * pdata)417 int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
418 {
419 int i;
420 struct usbtll_omap *tll;
421
422 if (!tll_dev)
423 return -ENODEV;
424
425 spin_lock(&tll_lock);
426 tll = dev_get_drvdata(tll_dev);
427
428 for (i = 0; i < tll->nch; i++) {
429 if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
430 if (!IS_ERR(tll->ch_clk[i]))
431 clk_disable(tll->ch_clk[i]);
432 }
433 }
434
435 spin_unlock(&tll_lock);
436 pm_runtime_put_sync(tll_dev);
437
438 return 0;
439 }
440 EXPORT_SYMBOL_GPL(omap_tll_disable);
441
442 MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
443 MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
444 MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
445
omap_usbtll_drvinit(void)446 static int __init omap_usbtll_drvinit(void)
447 {
448 return platform_driver_register(&usbtll_omap_driver);
449 }
450
451 /*
452 * init before usbhs core driver;
453 * The usbtll driver should be initialized before
454 * the usbhs core driver probe function is called.
455 */
456 fs_initcall(omap_usbtll_drvinit);
457
omap_usbtll_drvexit(void)458 static void __exit omap_usbtll_drvexit(void)
459 {
460 platform_driver_unregister(&usbtll_omap_driver);
461 }
462 module_exit(omap_usbtll_drvexit);
463