1 /*
2 * linux/arch/mips/txx9/pci.c
3 *
4 * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
5 * linux/arch/mips/txx9/rbtx4938/setup.c,
6 * and RBTX49xx patch from CELF patch archive.
7 *
8 * Copyright 2001-2005 MontaVista Software Inc.
9 * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org)
10 * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
11 *
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file "COPYING" in the main directory of this archive
14 * for more details.
15 */
16 #include <linux/delay.h>
17 #include <linux/jiffies.h>
18 #include <linux/io.h>
19 #include <asm/txx9/generic.h>
20 #include <asm/txx9/pci.h>
21 #ifdef CONFIG_TOSHIBA_FPCIB0
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <asm/i8259.h>
25 #include <asm/txx9/smsc_fdc37m81x.h>
26 #endif
27
28 static int __init
early_read_config_word(struct pci_controller * hose,int top_bus,int bus,int devfn,int offset,u16 * value)29 early_read_config_word(struct pci_controller *hose,
30 int top_bus, int bus, int devfn, int offset, u16 *value)
31 {
32 struct pci_bus fake_bus;
33
34 fake_bus.number = bus;
35 fake_bus.sysdata = hose;
36 fake_bus.ops = hose->pci_ops;
37
38 if (bus != top_bus)
39 /* Fake a parent bus structure. */
40 fake_bus.parent = &fake_bus;
41 else
42 fake_bus.parent = NULL;
43
44 return pci_bus_read_config_word(&fake_bus, devfn, offset, value);
45 }
46
txx9_pci66_check(struct pci_controller * hose,int top_bus,int current_bus)47 int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
48 int current_bus)
49 {
50 u32 pci_devfn;
51 unsigned short vid;
52 int cap66 = -1;
53 u16 stat;
54 int ret;
55
56 /* It seems SLC90E66 needs some time after PCI reset... */
57 mdelay(80);
58
59 pr_info("PCI: Checking 66MHz capabilities...\n");
60
61 for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
62 if (PCI_FUNC(pci_devfn))
63 continue;
64 ret = early_read_config_word(hose, top_bus, current_bus,
65 pci_devfn, PCI_VENDOR_ID, &vid);
66 if (ret != PCIBIOS_SUCCESSFUL)
67 continue;
68 if (vid == 0xffff)
69 continue;
70
71 /* check 66MHz capability */
72 if (cap66 < 0)
73 cap66 = 1;
74 if (cap66) {
75 early_read_config_word(hose, top_bus, current_bus,
76 pci_devfn, PCI_STATUS, &stat);
77 if (!(stat & PCI_STATUS_66MHZ)) {
78 pr_debug("PCI: %02x:%02x not 66MHz capable.\n",
79 current_bus, pci_devfn);
80 cap66 = 0;
81 break;
82 }
83 }
84 }
85 return cap66 > 0;
86 }
87
88 static struct resource primary_pci_mem_res[2] = {
89 { .name = "PCI MEM" },
90 { .name = "PCI MMIO" },
91 };
92 static struct resource primary_pci_io_res = { .name = "PCI IO" };
93 struct pci_controller txx9_primary_pcic = {
94 .mem_resource = &primary_pci_mem_res[0],
95 .io_resource = &primary_pci_io_res,
96 };
97
98 #ifdef CONFIG_64BIT
99 int txx9_pci_mem_high __initdata = 1;
100 #else
101 int txx9_pci_mem_high __initdata;
102 #endif
103
104 /*
105 * allocate pci_controller and resources.
106 * mem_base, io_base: physical address. 0 for auto assignment.
107 * mem_size and io_size means max size on auto assignment.
108 * pcic must be &txx9_primary_pcic or NULL.
109 */
110 struct pci_controller *__init
txx9_alloc_pci_controller(struct pci_controller * pcic,unsigned long mem_base,unsigned long mem_size,unsigned long io_base,unsigned long io_size)111 txx9_alloc_pci_controller(struct pci_controller *pcic,
112 unsigned long mem_base, unsigned long mem_size,
113 unsigned long io_base, unsigned long io_size)
114 {
115 struct pcic {
116 struct pci_controller c;
117 struct resource r_mem[2];
118 struct resource r_io;
119 } *new = NULL;
120 int min_size = 0x10000;
121
122 if (!pcic) {
123 new = kzalloc(sizeof(*new), GFP_KERNEL);
124 if (!new)
125 return NULL;
126 new->r_mem[0].name = "PCI mem";
127 new->r_mem[1].name = "PCI mmio";
128 new->r_io.name = "PCI io";
129 new->c.mem_resource = new->r_mem;
130 new->c.io_resource = &new->r_io;
131 pcic = &new->c;
132 } else
133 BUG_ON(pcic != &txx9_primary_pcic);
134 pcic->io_resource->flags = IORESOURCE_IO;
135
136 /*
137 * for auto assignment, first search a (big) region for PCI
138 * MEM, then search a region for PCI IO.
139 */
140 if (mem_base) {
141 pcic->mem_resource[0].start = mem_base;
142 pcic->mem_resource[0].end = mem_base + mem_size - 1;
143 if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
144 goto free_and_exit;
145 } else {
146 unsigned long min = 0, max = 0x20000000; /* low 512MB */
147 if (!mem_size) {
148 /* default size for auto assignment */
149 if (txx9_pci_mem_high)
150 mem_size = 0x20000000; /* mem:512M(max) */
151 else
152 mem_size = 0x08000000; /* mem:128M(max) */
153 }
154 if (txx9_pci_mem_high) {
155 min = 0x20000000;
156 max = 0xe0000000;
157 }
158 /* search free region for PCI MEM */
159 for (; mem_size >= min_size; mem_size /= 2) {
160 if (allocate_resource(&iomem_resource,
161 &pcic->mem_resource[0],
162 mem_size, min, max,
163 mem_size, NULL, NULL) == 0)
164 break;
165 }
166 if (mem_size < min_size)
167 goto free_and_exit;
168 }
169
170 pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
171 if (io_base) {
172 pcic->mem_resource[1].start = io_base;
173 pcic->mem_resource[1].end = io_base + io_size - 1;
174 if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
175 goto release_and_exit;
176 } else {
177 if (!io_size)
178 /* default size for auto assignment */
179 io_size = 0x01000000; /* io:16M(max) */
180 /* search free region for PCI IO in low 512MB */
181 for (; io_size >= min_size; io_size /= 2) {
182 if (allocate_resource(&iomem_resource,
183 &pcic->mem_resource[1],
184 io_size, 0, 0x20000000,
185 io_size, NULL, NULL) == 0)
186 break;
187 }
188 if (io_size < min_size)
189 goto release_and_exit;
190 io_base = pcic->mem_resource[1].start;
191 }
192
193 pcic->mem_resource[0].flags = IORESOURCE_MEM;
194 if (pcic == &txx9_primary_pcic &&
195 mips_io_port_base == (unsigned long)-1) {
196 /* map ioport 0 to PCI I/O space address 0 */
197 set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
198 pcic->io_resource->start = 0;
199 pcic->io_offset = 0; /* busaddr == ioaddr */
200 pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
201 } else {
202 /* physaddr to ioaddr */
203 pcic->io_resource->start =
204 io_base - (mips_io_port_base - IO_BASE);
205 pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
206 pcic->io_map_base = mips_io_port_base;
207 }
208 pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
209
210 pcic->mem_offset = 0; /* busaddr == physaddr */
211
212 pr_info("PCI: IO %pR MEM %pR\n", &pcic->mem_resource[1],
213 &pcic->mem_resource[0]);
214
215 /* register_pci_controller() will request MEM resource */
216 release_resource(&pcic->mem_resource[0]);
217 return pcic;
218 release_and_exit:
219 release_resource(&pcic->mem_resource[0]);
220 free_and_exit:
221 kfree(new);
222 pr_err("PCI: Failed to allocate resources.\n");
223 return NULL;
224 }
225
226 static int __init
txx9_arch_pci_init(void)227 txx9_arch_pci_init(void)
228 {
229 PCIBIOS_MIN_IO = 0x8000; /* reserve legacy I/O space */
230 return 0;
231 }
232 arch_initcall(txx9_arch_pci_init);
233
234 /* IRQ/IDSEL mapping */
235 int txx9_pci_option =
236 #ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
237 TXX9_PCI_OPT_PICMG |
238 #endif
239 TXX9_PCI_OPT_CLK_AUTO;
240
241 enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
242
243 #ifdef CONFIG_TOSHIBA_FPCIB0
i8259_interrupt(int irq,void * dev_id)244 static irqreturn_t i8259_interrupt(int irq, void *dev_id)
245 {
246 int isairq;
247
248 isairq = i8259_irq();
249 if (unlikely(isairq <= I8259A_IRQ_BASE))
250 return IRQ_NONE;
251 generic_handle_irq(isairq);
252 return IRQ_HANDLED;
253 }
254
txx9_i8259_irq_setup(int irq)255 static int txx9_i8259_irq_setup(int irq)
256 {
257 int err;
258
259 init_i8259_irqs();
260 err = request_irq(irq, &i8259_interrupt, IRQF_SHARED,
261 "cascade(i8259)", (void *)(long)irq);
262 if (!err)
263 pr_info("PCI-ISA bridge PIC (irq %d)\n", irq);
264 return err;
265 }
266
quirk_slc90e66_bridge(struct pci_dev * dev)267 static void __ref quirk_slc90e66_bridge(struct pci_dev *dev)
268 {
269 int irq; /* PCI/ISA Bridge interrupt */
270 u8 reg_64;
271 u32 reg_b0;
272 u8 reg_e1;
273 irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
274 if (!irq)
275 return;
276 txx9_i8259_irq_setup(irq);
277 pci_read_config_byte(dev, 0x64, ®_64);
278 pci_read_config_dword(dev, 0xb0, ®_b0);
279 pci_read_config_byte(dev, 0xe1, ®_e1);
280 /* serial irq control */
281 reg_64 = 0xd0;
282 /* serial irq pin */
283 reg_b0 |= 0x00010000;
284 /* ide irq on isa14 */
285 reg_e1 &= 0xf0;
286 reg_e1 |= 0x0d;
287 pci_write_config_byte(dev, 0x64, reg_64);
288 pci_write_config_dword(dev, 0xb0, reg_b0);
289 pci_write_config_byte(dev, 0xe1, reg_e1);
290
291 smsc_fdc37m81x_init(0x3f0);
292 smsc_fdc37m81x_config_beg();
293 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
294 SMSC_FDC37M81X_KBD);
295 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
296 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
297 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
298 1);
299 smsc_fdc37m81x_config_end();
300 }
301
quirk_slc90e66_ide(struct pci_dev * dev)302 static void quirk_slc90e66_ide(struct pci_dev *dev)
303 {
304 unsigned char dat;
305 int regs[2] = {0x41, 0x43};
306 int i;
307
308 /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
309 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
310 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
311 pr_info("PCI: %s: IRQ %02x", pci_name(dev), dat);
312 /* enable SMSC SLC90E66 IDE */
313 for (i = 0; i < ARRAY_SIZE(regs); i++) {
314 pci_read_config_byte(dev, regs[i], &dat);
315 pci_write_config_byte(dev, regs[i], dat | 0x80);
316 pci_read_config_byte(dev, regs[i], &dat);
317 pr_cont(" IDETIM%d %02x", i, dat);
318 }
319 pci_read_config_byte(dev, 0x5c, &dat);
320 /*
321 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
322 *
323 * This line of code is intended to provide the user with a work
324 * around solution to the anomalies cited in SMSC's anomaly sheet
325 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
326 *
327 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
328 */
329 dat |= 0x01;
330 pci_write_config_byte(dev, 0x5c, dat);
331 pci_read_config_byte(dev, 0x5c, &dat);
332 pr_cont(" REG5C %02x\n", dat);
333 }
334 #endif /* CONFIG_TOSHIBA_FPCIB0 */
335
tc35815_fixup(struct pci_dev * dev)336 static void tc35815_fixup(struct pci_dev *dev)
337 {
338 /* This device may have PM registers but not they are not supported. */
339 if (dev->pm_cap) {
340 dev_info(&dev->dev, "PM disabled\n");
341 dev->pm_cap = 0;
342 }
343 }
344
final_fixup(struct pci_dev * dev)345 static void final_fixup(struct pci_dev *dev)
346 {
347 unsigned long timeout;
348 unsigned char bist;
349 int ret;
350
351 /* Do built-in self test */
352 ret = pci_read_config_byte(dev, PCI_BIST, &bist);
353 if ((ret != PCIBIOS_SUCCESSFUL) || !(bist & PCI_BIST_CAPABLE))
354 return;
355
356 pci_set_power_state(dev, PCI_D0);
357 pr_info("PCI: %s BIST...", pci_name(dev));
358 pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
359 timeout = jiffies + HZ * 2; /* timeout after 2 sec */
360 do {
361 pci_read_config_byte(dev, PCI_BIST, &bist);
362 if (time_after(jiffies, timeout))
363 break;
364 } while (bist & PCI_BIST_START);
365 if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
366 pr_cont("failed. (0x%x)\n", bist);
367 else
368 pr_cont("OK.\n");
369 }
370
371 #ifdef CONFIG_TOSHIBA_FPCIB0
372 #define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
373 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
374 quirk_slc90e66_bridge);
375 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
376 quirk_slc90e66_ide);
377 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
378 quirk_slc90e66_ide);
379 #endif
380 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
381 PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup);
382 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
383 PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup);
384 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
385 DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
386
pcibios_plat_dev_init(struct pci_dev * dev)387 int pcibios_plat_dev_init(struct pci_dev *dev)
388 {
389 return 0;
390 }
391
392 static int (*txx9_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
pcibios_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)393 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
394 {
395 return txx9_pci_map_irq(dev, slot, pin);
396 }
397
398 char * (*txx9_board_pcibios_setup)(char *str) __initdata;
399
txx9_pcibios_setup(char * str)400 char *__init txx9_pcibios_setup(char *str)
401 {
402 if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
403 return NULL;
404 if (!strcmp(str, "picmg")) {
405 /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
406 (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
407 txx9_pci_option |= TXX9_PCI_OPT_PICMG;
408 return NULL;
409 } else if (!strcmp(str, "nopicmg")) {
410 /* non-PICMG compliant backplane (TOSHIBA
411 RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
412 txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
413 return NULL;
414 } else if (!strncmp(str, "clk=", 4)) {
415 char *val = str + 4;
416 txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
417 if (strcmp(val, "33") == 0)
418 txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
419 else if (strcmp(val, "66") == 0)
420 txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
421 else /* "auto" */
422 txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
423 return NULL;
424 } else if (!strncmp(str, "err=", 4)) {
425 if (!strcmp(str + 4, "panic"))
426 txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
427 else if (!strcmp(str + 4, "ignore"))
428 txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
429 return NULL;
430 }
431
432 txx9_pci_map_irq = txx9_board_vec->pci_map_irq;
433
434 return str;
435 }
436