xref: /linux/arch/powerpc/sysdev/tsi108_pci.c (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Common routines for Tundra Semiconductor TSI108 host bridge.
4  *
5  * 2004-2005 (c) Tundra Semiconductor Corp.
6  * Author: Alex Bounine (alexandreb@tundra.com)
7  * Author: Roy Zang (tie-fei.zang@freescale.com)
8  * 	   Add pci interrupt router host
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/pci.h>
14 #include <linux/irq.h>
15 #include <linux/irqdomain.h>
16 #include <linux/interrupt.h>
17 #include <linux/of_address.h>
18 
19 #include <asm/byteorder.h>
20 #include <asm/io.h>
21 #include <asm/irq.h>
22 #include <linux/uaccess.h>
23 #include <asm/machdep.h>
24 #include <asm/pci-bridge.h>
25 #include <asm/tsi108.h>
26 #include <asm/tsi108_pci.h>
27 #include <asm/tsi108_irq.h>
28 
29 #undef DEBUG
30 #ifdef DEBUG
31 #define DBG(x...) printk(x)
32 #else
33 #define DBG(x...)
34 #endif
35 
36 #define tsi_mk_config_addr(bus, devfunc, offset) \
37 	((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
38 
39 u32 tsi108_pci_cfg_base;
40 static u32 tsi108_pci_cfg_phys;
41 u32 tsi108_csr_vir_base;
42 static struct irq_domain *pci_irq_host;
43 
44 extern u32 get_vir_csrbase(void);
45 extern u32 tsi108_read_reg(u32 reg_offset);
46 extern void tsi108_write_reg(u32 reg_offset, u32 val);
47 
48 int
tsi108_direct_write_config(struct pci_bus * bus,unsigned int devfunc,int offset,int len,u32 val)49 tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
50 			   int offset, int len, u32 val)
51 {
52 	volatile unsigned char *cfg_addr;
53 	struct pci_controller *hose = pci_bus_to_host(bus);
54 
55 	if (ppc_md.pci_exclude_device)
56 		if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
57 			return PCIBIOS_DEVICE_NOT_FOUND;
58 
59 	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
60 							devfunc, offset) |
61 							(offset & 0x03));
62 
63 #ifdef DEBUG
64 	printk("PCI CFG write : ");
65 	printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
66 	printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
67 	printk("data = 0x%08x\n", val);
68 #endif
69 
70 	switch (len) {
71 	case 1:
72 		out_8((u8 *) cfg_addr, val);
73 		break;
74 	case 2:
75 		out_le16((u16 *) cfg_addr, val);
76 		break;
77 	default:
78 		out_le32((u32 *) cfg_addr, val);
79 		break;
80 	}
81 
82 	return PCIBIOS_SUCCESSFUL;
83 }
84 
tsi108_clear_pci_error(u32 pci_cfg_base)85 void tsi108_clear_pci_error(u32 pci_cfg_base)
86 {
87 	u32 err_stat, err_addr, pci_stat;
88 
89 	/*
90 	 * Quietly clear PB and PCI error flags set as result
91 	 * of PCI/X configuration read requests.
92 	 */
93 
94 	/* Read PB Error Log Registers */
95 
96 	err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
97 	err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
98 
99 	if (err_stat & TSI108_PB_ERRCS_ES) {
100 		/* Clear error flag */
101 		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
102 				 TSI108_PB_ERRCS_ES);
103 
104 		/* Clear read error reported in PB_ISR */
105 		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
106 				 TSI108_PB_ISR_PBS_RD_ERR);
107 
108 		/* Clear PCI/X bus cfg errors if applicable */
109 		if ((err_addr & 0xFF000000) == pci_cfg_base) {
110 			pci_stat =
111 			    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
112 			tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
113 					 pci_stat);
114 		}
115 	}
116 
117 	return;
118 }
119 
120 #define __tsi108_read_pci_config(x, addr, op)		\
121 	__asm__ __volatile__(				\
122 		"	"op" %0,0,%1\n"		\
123 		"1:	eieio\n"			\
124 		"2:\n"					\
125 		".section .fixup,\"ax\"\n"		\
126 		"3:	li %0,-1\n"			\
127 		"	b 2b\n"				\
128 		".previous\n"				\
129 		EX_TABLE(1b, 3b)			\
130 		: "=r"(x) : "r"(addr))
131 
132 int
tsi108_direct_read_config(struct pci_bus * bus,unsigned int devfn,int offset,int len,u32 * val)133 tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
134 			  int len, u32 * val)
135 {
136 	volatile unsigned char *cfg_addr;
137 	struct pci_controller *hose = pci_bus_to_host(bus);
138 	u32 temp;
139 
140 	if (ppc_md.pci_exclude_device)
141 		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
142 			return PCIBIOS_DEVICE_NOT_FOUND;
143 
144 	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
145 							devfn,
146 							offset) | (offset &
147 								   0x03));
148 
149 	switch (len) {
150 	case 1:
151 		__tsi108_read_pci_config(temp, cfg_addr, "lbzx");
152 		break;
153 	case 2:
154 		__tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
155 		break;
156 	default:
157 		__tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
158 		break;
159 	}
160 
161 	*val = temp;
162 
163 #ifdef DEBUG
164 	if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
165 		printk("PCI CFG read : ");
166 		printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
167 		printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
168 		printk("data = 0x%x\n", *val);
169 	}
170 #endif
171 	return PCIBIOS_SUCCESSFUL;
172 }
173 
tsi108_clear_pci_cfg_error(void)174 void tsi108_clear_pci_cfg_error(void)
175 {
176 	tsi108_clear_pci_error(tsi108_pci_cfg_phys);
177 }
178 
179 static struct pci_ops tsi108_direct_pci_ops = {
180 	.read = tsi108_direct_read_config,
181 	.write = tsi108_direct_write_config,
182 };
183 
tsi108_setup_pci(struct device_node * dev,u32 cfg_phys,int primary)184 int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
185 {
186 	int len;
187 	struct pci_controller *hose;
188 	struct resource rsrc;
189 	const int *bus_range;
190 	int has_address = 0;
191 
192 	/* PCI Config mapping */
193 	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
194 	tsi108_pci_cfg_phys = cfg_phys;
195 	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
196 	    tsi108_pci_cfg_base);
197 
198 	/* Fetch host bridge registers address */
199 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
200 
201 	/* Get bus range if any */
202 	bus_range = of_get_property(dev, "bus-range", &len);
203 	if (bus_range == NULL || len < 2 * sizeof(int)) {
204 		printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
205 		       " bus 0\n", dev);
206 	}
207 
208 	hose = pcibios_alloc_controller(dev);
209 
210 	if (!hose) {
211 		printk("PCI Host bridge init failed\n");
212 		return -ENOMEM;
213 	}
214 
215 	hose->first_busno = bus_range ? bus_range[0] : 0;
216 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
217 
218 	(hose)->ops = &tsi108_direct_pci_ops;
219 
220 	pr_info("Found tsi108 PCI host bridge at 0x%pa. Firmware bus number: %d->%d\n",
221 		&rsrc.start, hose->first_busno, hose->last_busno);
222 
223 	/* Interpret the "ranges" property */
224 	/* This also maps the I/O region and sets isa_io/mem_base */
225 	pci_process_bridge_OF_ranges(hose, dev, primary);
226 	return 0;
227 }
228 
229 /*
230  * Low level utility functions
231  */
232 
tsi108_pci_int_mask(u_int irq)233 static void tsi108_pci_int_mask(u_int irq)
234 {
235 	u_int irp_cfg;
236 	int int_line = (irq - IRQ_PCI_INTAD_BASE);
237 
238 	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
239 	mb();
240 	irp_cfg |= (1 << int_line);	/* INTx_DIR = output */
241 	irp_cfg &= ~(3 << (8 + (int_line * 2)));	/* INTx_TYPE = unused */
242 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
243 	mb();
244 	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
245 }
246 
tsi108_pci_int_unmask(u_int irq)247 static void tsi108_pci_int_unmask(u_int irq)
248 {
249 	u_int irp_cfg;
250 	int int_line = (irq - IRQ_PCI_INTAD_BASE);
251 
252 	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
253 	mb();
254 	irp_cfg &= ~(1 << int_line);
255 	irp_cfg |= (3 << (8 + (int_line * 2)));
256 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
257 	mb();
258 }
259 
init_pci_source(void)260 static void __init init_pci_source(void)
261 {
262 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
263 			0x0000ff00);
264 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
265 			TSI108_PCI_IRP_ENABLE_P_INT);
266 	mb();
267 }
268 
get_pci_source(void)269 static inline unsigned int get_pci_source(void)
270 {
271 	u_int temp = 0;
272 	int irq = -1;
273 	int i;
274 	u_int pci_irp_stat;
275 	static int mask = 0;
276 
277 	/* Read PCI/X block interrupt status register */
278 	pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
279 	mb();
280 
281 	if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
282 		/* Process Interrupt from PCI bus INTA# - INTD# lines */
283 		temp =
284 		    tsi108_read_reg(TSI108_PCI_OFFSET +
285 				    TSI108_PCI_IRP_INTAD) & 0xf;
286 		mb();
287 		for (i = 0; i < 4; i++, mask++) {
288 			if (temp & (1 << mask % 4)) {
289 				irq = IRQ_PCI_INTA + mask % 4;
290 				mask++;
291 				break;
292 			}
293 		}
294 
295 		/* Disable interrupts from PCI block */
296 		temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
297 		tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
298 				temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
299 		mb();
300 		(void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
301 		mb();
302 	}
303 #ifdef DEBUG
304 	else {
305 		printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
306 		pci_irp_stat =
307 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
308 		temp =
309 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
310 		mb();
311 		printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
312 		temp =
313 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
314 		mb();
315 		printk("cfg_ctl=0x%08x ", temp);
316 		temp =
317 		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
318 		mb();
319 		printk("irp_enable=0x%08x\n", temp);
320 	}
321 #endif	/* end of DEBUG */
322 
323 	return irq;
324 }
325 
326 
327 /*
328  * Linux descriptor level callbacks
329  */
330 
tsi108_pci_irq_unmask(struct irq_data * d)331 static void tsi108_pci_irq_unmask(struct irq_data *d)
332 {
333 	tsi108_pci_int_unmask(d->irq);
334 
335 	/* Enable interrupts from PCI block */
336 	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
337 			 tsi108_read_reg(TSI108_PCI_OFFSET +
338 					 TSI108_PCI_IRP_ENABLE) |
339 			 TSI108_PCI_IRP_ENABLE_P_INT);
340 	mb();
341 }
342 
tsi108_pci_irq_mask(struct irq_data * d)343 static void tsi108_pci_irq_mask(struct irq_data *d)
344 {
345 	tsi108_pci_int_mask(d->irq);
346 }
347 
tsi108_pci_irq_ack(struct irq_data * d)348 static void tsi108_pci_irq_ack(struct irq_data *d)
349 {
350 	tsi108_pci_int_mask(d->irq);
351 }
352 
353 /*
354  * Interrupt controller descriptor for cascaded PCI interrupt controller.
355  */
356 
357 static struct irq_chip tsi108_pci_irq = {
358 	.name = "tsi108_PCI_int",
359 	.irq_mask = tsi108_pci_irq_mask,
360 	.irq_ack = tsi108_pci_irq_ack,
361 	.irq_unmask = tsi108_pci_irq_unmask,
362 };
363 
pci_irq_host_xlate(struct irq_domain * h,struct device_node * ct,const u32 * intspec,unsigned int intsize,irq_hw_number_t * out_hwirq,unsigned int * out_flags)364 static int pci_irq_host_xlate(struct irq_domain *h, struct device_node *ct,
365 			    const u32 *intspec, unsigned int intsize,
366 			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
367 {
368 	*out_hwirq = intspec[0];
369 	*out_flags = IRQ_TYPE_LEVEL_HIGH;
370 	return 0;
371 }
372 
pci_irq_host_map(struct irq_domain * h,unsigned int virq,irq_hw_number_t hw)373 static int pci_irq_host_map(struct irq_domain *h, unsigned int virq,
374 			  irq_hw_number_t hw)
375 {	unsigned int irq;
376 	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
377 	if ((virq >= 1) && (virq <= 4)){
378 		irq = virq + IRQ_PCI_INTAD_BASE - 1;
379 		irq_set_status_flags(irq, IRQ_LEVEL);
380 		irq_set_chip(irq, &tsi108_pci_irq);
381 	}
382 	return 0;
383 }
384 
385 static const struct irq_domain_ops pci_irq_domain_ops = {
386 	.map = pci_irq_host_map,
387 	.xlate = pci_irq_host_xlate,
388 };
389 
390 /*
391  * Exported functions
392  */
393 
394 /*
395  * The Tsi108 PCI interrupts initialization routine.
396  *
397  * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
398  * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
399  * PCI block has to be treated as a cascaded interrupt controller connected
400  * to the MPIC.
401  */
402 
tsi108_pci_int_init(struct device_node * node)403 void __init tsi108_pci_int_init(struct device_node *node)
404 {
405 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
406 
407 	pci_irq_host = irq_domain_add_legacy(node, NR_IRQS_LEGACY, 0, 0,
408 					     &pci_irq_domain_ops, NULL);
409 	if (pci_irq_host == NULL) {
410 		printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
411 		return;
412 	}
413 
414 	init_pci_source();
415 }
416 
tsi108_irq_cascade(struct irq_desc * desc)417 void tsi108_irq_cascade(struct irq_desc *desc)
418 {
419 	struct irq_chip *chip = irq_desc_get_chip(desc);
420 	unsigned int cascade_irq = get_pci_source();
421 
422 	if (cascade_irq)
423 		generic_handle_irq(cascade_irq);
424 
425 	chip->irq_eoi(&desc->irq_data);
426 }
427