xref: /linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h (revision d0034a7a4ac7fae708146ac0059b9c47a1543f0d)
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #ifndef	_BRCM_D11_H_
18 #define	_BRCM_D11_H_
19 
20 #include <linux/ieee80211.h>
21 
22 #include <defs.h>
23 #include "pub.h"
24 #include "dma.h"
25 
26 /* RX FIFO numbers */
27 #define	RX_FIFO			0	/* data and ctl frames */
28 #define	RX_TXSTATUS_FIFO	3	/* RX fifo for tx status packages */
29 
30 /* TX FIFO numbers using WME Access Category */
31 #define	TX_AC_BK_FIFO		0	/* Background TX FIFO */
32 #define	TX_AC_BE_FIFO		1	/* Best-Effort TX FIFO */
33 #define	TX_AC_VI_FIFO		2	/* Video TX FIFO */
34 #define	TX_AC_VO_FIFO		3	/* Voice TX FIFO */
35 #define	TX_BCMC_FIFO		4	/* Broadcast/Multicast TX FIFO */
36 #define	TX_ATIM_FIFO		5	/* TX fifo for ATIM window info */
37 
38 /* Addr is byte address used by SW; offset is word offset used by uCode */
39 
40 /* Per AC TX limit settings */
41 #define M_AC_TXLMT_BASE_ADDR         (0x180 * 2)
42 #define M_AC_TXLMT_ADDR(_ac)         (M_AC_TXLMT_BASE_ADDR + (2 * (_ac)))
43 
44 /* Legacy TX FIFO numbers */
45 #define	TX_DATA_FIFO		TX_AC_BE_FIFO
46 #define	TX_CTL_FIFO		TX_AC_VO_FIFO
47 
48 #define WL_RSSI_ANT_MAX		4	/* max possible rx antennas */
49 
50 struct intctrlregs {
51 	u32 intstatus;
52 	u32 intmask;
53 };
54 
55 /* PIO structure,
56  *  support two PIO format: 2 bytes access and 4 bytes access
57  *  basic FIFO register set is per channel(transmit or receive)
58  *  a pair of channels is defined for convenience
59  */
60 /* 2byte-wide pio register set per channel(xmt or rcv) */
61 struct pio2regs {
62 	u16 fifocontrol;
63 	u16 fifodata;
64 	u16 fifofree;	/* only valid in xmt channel, not in rcv channel */
65 	u16 PAD;
66 };
67 
68 /* a pair of pio channels(tx and rx) */
69 struct pio2regp {
70 	struct pio2regs tx;
71 	struct pio2regs rx;
72 };
73 
74 /* 4byte-wide pio register set per channel(xmt or rcv) */
75 struct pio4regs {
76 	u32 fifocontrol;
77 	u32 fifodata;
78 };
79 
80 /* a pair of pio channels(tx and rx) */
81 struct pio4regp {
82 	struct pio4regs tx;
83 	struct pio4regs rx;
84 };
85 
86 /* read: 32-bit register that can be read as 32-bit or as 2 16-bit
87  * write: only low 16b-it half can be written
88  */
89 union pmqreg {
90 	u32 pmqhostdata;	/* read only! */
91 	struct {
92 		u16 pmqctrlstatus;	/* read/write */
93 		u16 PAD;
94 	} w;
95 };
96 
97 struct fifo64 {
98 	struct dma64regs dmaxmt;	/* dma tx */
99 	struct pio4regs piotx;	/* pio tx */
100 	struct dma64regs dmarcv;	/* dma rx */
101 	struct pio4regs piorx;	/* pio rx */
102 };
103 
104 /*
105  * Host Interface Registers
106  */
107 struct d11regs {
108 	/* Device Control ("semi-standard host registers") */
109 	u32 PAD[3];		/* 0x0 - 0x8 */
110 	u32 biststatus;	/* 0xC */
111 	u32 biststatus2;	/* 0x10 */
112 	u32 PAD;		/* 0x14 */
113 	u32 gptimer;		/* 0x18 */
114 	u32 usectimer;	/* 0x1c *//* for corerev >= 26 */
115 
116 	/* Interrupt Control *//* 0x20 */
117 	struct intctrlregs intctrlregs[8];
118 
119 	u32 PAD[40];		/* 0x60 - 0xFC */
120 
121 	u32 intrcvlazy[4];	/* 0x100 - 0x10C */
122 
123 	u32 PAD[4];		/* 0x110 - 0x11c */
124 
125 	u32 maccontrol;	/* 0x120 */
126 	u32 maccommand;	/* 0x124 */
127 	u32 macintstatus;	/* 0x128 */
128 	u32 macintmask;	/* 0x12C */
129 
130 	/* Transmit Template Access */
131 	u32 tplatewrptr;	/* 0x130 */
132 	u32 tplatewrdata;	/* 0x134 */
133 	u32 PAD[2];		/* 0x138 - 0x13C */
134 
135 	/* PMQ registers */
136 	union pmqreg pmqreg;	/* 0x140 */
137 	u32 pmqpatl;		/* 0x144 */
138 	u32 pmqpath;		/* 0x148 */
139 	u32 PAD;		/* 0x14C */
140 
141 	u32 chnstatus;	/* 0x150 */
142 	u32 psmdebug;	/* 0x154 */
143 	u32 phydebug;	/* 0x158 */
144 	u32 machwcap;	/* 0x15C */
145 
146 	/* Extended Internal Objects */
147 	u32 objaddr;		/* 0x160 */
148 	u32 objdata;		/* 0x164 */
149 	u32 PAD[2];		/* 0x168 - 0x16c */
150 
151 	u32 frmtxstatus;	/* 0x170 */
152 	u32 frmtxstatus2;	/* 0x174 */
153 	u32 PAD[2];		/* 0x178 - 0x17c */
154 
155 	/* TSF host access */
156 	u32 tsf_timerlow;	/* 0x180 */
157 	u32 tsf_timerhigh;	/* 0x184 */
158 	u32 tsf_cfprep;	/* 0x188 */
159 	u32 tsf_cfpstart;	/* 0x18c */
160 	u32 tsf_cfpmaxdur32;	/* 0x190 */
161 	u32 PAD[3];		/* 0x194 - 0x19c */
162 
163 	u32 maccontrol1;	/* 0x1a0 */
164 	u32 machwcap1;	/* 0x1a4 */
165 	u32 PAD[14];		/* 0x1a8 - 0x1dc */
166 
167 	/* Clock control and hardware workarounds*/
168 	u32 clk_ctl_st;	/* 0x1e0 */
169 	u32 hw_war;
170 	u32 d11_phypllctl;	/* the phypll request/avail bits are
171 				 * moved to clk_ctl_st
172 				 */
173 	u32 PAD[5];		/* 0x1ec - 0x1fc */
174 
175 	/* 0x200-0x37F dma/pio registers */
176 	struct fifo64 fifo64regs[6];
177 
178 	/* FIFO diagnostic port access */
179 	struct dma32diag dmafifo;	/* 0x380 - 0x38C */
180 
181 	u32 aggfifocnt;	/* 0x390 */
182 	u32 aggfifodata;	/* 0x394 */
183 	u32 PAD[16];		/* 0x398 - 0x3d4 */
184 	u16 radioregaddr;	/* 0x3d8 */
185 	u16 radioregdata;	/* 0x3da */
186 
187 	/*
188 	 * time delay between the change on rf disable input and
189 	 * radio shutdown
190 	 */
191 	u32 rfdisabledly;	/* 0x3DC */
192 
193 	/* PHY register access */
194 	u16 phyversion;	/* 0x3e0 - 0x0 */
195 	u16 phybbconfig;	/* 0x3e2 - 0x1 */
196 	u16 phyadcbias;	/* 0x3e4 - 0x2  Bphy only */
197 	u16 phyanacore;	/* 0x3e6 - 0x3  pwwrdwn on aphy */
198 	u16 phyrxstatus0;	/* 0x3e8 - 0x4 */
199 	u16 phyrxstatus1;	/* 0x3ea - 0x5 */
200 	u16 phycrsth;	/* 0x3ec - 0x6 */
201 	u16 phytxerror;	/* 0x3ee - 0x7 */
202 	u16 phychannel;	/* 0x3f0 - 0x8 */
203 	u16 PAD[1];		/* 0x3f2 - 0x9 */
204 	u16 phytest;		/* 0x3f4 - 0xa */
205 	u16 phy4waddr;	/* 0x3f6 - 0xb */
206 	u16 phy4wdatahi;	/* 0x3f8 - 0xc */
207 	u16 phy4wdatalo;	/* 0x3fa - 0xd */
208 	u16 phyregaddr;	/* 0x3fc - 0xe */
209 	u16 phyregdata;	/* 0x3fe - 0xf */
210 
211 	/* IHR *//* 0x400 - 0x7FE */
212 
213 	/* RXE Block */
214 	u16 PAD[3];		/* 0x400 - 0x406 */
215 	u16 rcv_fifo_ctl;	/* 0x406 */
216 	u16 PAD;		/* 0x408 - 0x40a */
217 	u16 rcv_frm_cnt;	/* 0x40a */
218 	u16 PAD[4];		/* 0x40a - 0x414 */
219 	u16 rssi;		/* 0x414 */
220 	u16 PAD[5];		/* 0x414 - 0x420 */
221 	u16 rcm_ctl;		/* 0x420 */
222 	u16 rcm_mat_data;	/* 0x422 */
223 	u16 rcm_mat_mask;	/* 0x424 */
224 	u16 rcm_mat_dly;	/* 0x426 */
225 	u16 rcm_cond_mask_l;	/* 0x428 */
226 	u16 rcm_cond_mask_h;	/* 0x42A */
227 	u16 rcm_cond_dly;	/* 0x42C */
228 	u16 PAD[1];		/* 0x42E */
229 	u16 ext_ihr_addr;	/* 0x430 */
230 	u16 ext_ihr_data;	/* 0x432 */
231 	u16 rxe_phyrs_2;	/* 0x434 */
232 	u16 rxe_phyrs_3;	/* 0x436 */
233 	u16 phy_mode;	/* 0x438 */
234 	u16 rcmta_ctl;	/* 0x43a */
235 	u16 rcmta_size;	/* 0x43c */
236 	u16 rcmta_addr0;	/* 0x43e */
237 	u16 rcmta_addr1;	/* 0x440 */
238 	u16 rcmta_addr2;	/* 0x442 */
239 	u16 PAD[30];		/* 0x444 - 0x480 */
240 
241 	/* PSM Block *//* 0x480 - 0x500 */
242 
243 	u16 PAD;		/* 0x480 */
244 	u16 psm_maccontrol_h;	/* 0x482 */
245 	u16 psm_macintstatus_l;	/* 0x484 */
246 	u16 psm_macintstatus_h;	/* 0x486 */
247 	u16 psm_macintmask_l;	/* 0x488 */
248 	u16 psm_macintmask_h;	/* 0x48A */
249 	u16 PAD;		/* 0x48C */
250 	u16 psm_maccommand;	/* 0x48E */
251 	u16 psm_brc;		/* 0x490 */
252 	u16 psm_phy_hdr_param;	/* 0x492 */
253 	u16 psm_postcard;	/* 0x494 */
254 	u16 psm_pcard_loc_l;	/* 0x496 */
255 	u16 psm_pcard_loc_h;	/* 0x498 */
256 	u16 psm_gpio_in;	/* 0x49A */
257 	u16 psm_gpio_out;	/* 0x49C */
258 	u16 psm_gpio_oe;	/* 0x49E */
259 
260 	u16 psm_bred_0;	/* 0x4A0 */
261 	u16 psm_bred_1;	/* 0x4A2 */
262 	u16 psm_bred_2;	/* 0x4A4 */
263 	u16 psm_bred_3;	/* 0x4A6 */
264 	u16 psm_brcl_0;	/* 0x4A8 */
265 	u16 psm_brcl_1;	/* 0x4AA */
266 	u16 psm_brcl_2;	/* 0x4AC */
267 	u16 psm_brcl_3;	/* 0x4AE */
268 	u16 psm_brpo_0;	/* 0x4B0 */
269 	u16 psm_brpo_1;	/* 0x4B2 */
270 	u16 psm_brpo_2;	/* 0x4B4 */
271 	u16 psm_brpo_3;	/* 0x4B6 */
272 	u16 psm_brwk_0;	/* 0x4B8 */
273 	u16 psm_brwk_1;	/* 0x4BA */
274 	u16 psm_brwk_2;	/* 0x4BC */
275 	u16 psm_brwk_3;	/* 0x4BE */
276 
277 	u16 psm_base_0;	/* 0x4C0 */
278 	u16 psm_base_1;	/* 0x4C2 */
279 	u16 psm_base_2;	/* 0x4C4 */
280 	u16 psm_base_3;	/* 0x4C6 */
281 	u16 psm_base_4;	/* 0x4C8 */
282 	u16 psm_base_5;	/* 0x4CA */
283 	u16 psm_base_6;	/* 0x4CC */
284 	u16 psm_pc_reg_0;	/* 0x4CE */
285 	u16 psm_pc_reg_1;	/* 0x4D0 */
286 	u16 psm_pc_reg_2;	/* 0x4D2 */
287 	u16 psm_pc_reg_3;	/* 0x4D4 */
288 	u16 PAD[0xD];	/* 0x4D6 - 0x4DE */
289 	u16 psm_corectlsts;	/* 0x4f0 *//* Corerev >= 13 */
290 	u16 PAD[0x7];	/* 0x4f2 - 0x4fE */
291 
292 	/* TXE0 Block *//* 0x500 - 0x580 */
293 	u16 txe_ctl;		/* 0x500 */
294 	u16 txe_aux;		/* 0x502 */
295 	u16 txe_ts_loc;	/* 0x504 */
296 	u16 txe_time_out;	/* 0x506 */
297 	u16 txe_wm_0;	/* 0x508 */
298 	u16 txe_wm_1;	/* 0x50A */
299 	u16 txe_phyctl;	/* 0x50C */
300 	u16 txe_status;	/* 0x50E */
301 	u16 txe_mmplcp0;	/* 0x510 */
302 	u16 txe_mmplcp1;	/* 0x512 */
303 	u16 txe_phyctl1;	/* 0x514 */
304 
305 	u16 PAD[0x05];	/* 0x510 - 0x51E */
306 
307 	/* Transmit control */
308 	u16 xmtfifodef;	/* 0x520 */
309 	u16 xmtfifo_frame_cnt;	/* 0x522 *//* Corerev >= 16 */
310 	u16 xmtfifo_byte_cnt;	/* 0x524 *//* Corerev >= 16 */
311 	u16 xmtfifo_head;	/* 0x526 *//* Corerev >= 16 */
312 	u16 xmtfifo_rd_ptr;	/* 0x528 *//* Corerev >= 16 */
313 	u16 xmtfifo_wr_ptr;	/* 0x52A *//* Corerev >= 16 */
314 	u16 xmtfifodef1;	/* 0x52C *//* Corerev >= 16 */
315 
316 	u16 PAD[0x09];	/* 0x52E - 0x53E */
317 
318 	u16 xmtfifocmd;	/* 0x540 */
319 	u16 xmtfifoflush;	/* 0x542 */
320 	u16 xmtfifothresh;	/* 0x544 */
321 	u16 xmtfifordy;	/* 0x546 */
322 	u16 xmtfifoprirdy;	/* 0x548 */
323 	u16 xmtfiforqpri;	/* 0x54A */
324 	u16 xmttplatetxptr;	/* 0x54C */
325 	u16 PAD;		/* 0x54E */
326 	u16 xmttplateptr;	/* 0x550 */
327 	u16 smpl_clct_strptr;	/* 0x552 *//* Corerev >= 22 */
328 	u16 smpl_clct_stpptr;	/* 0x554 *//* Corerev >= 22 */
329 	u16 smpl_clct_curptr;	/* 0x556 *//* Corerev >= 22 */
330 	u16 PAD[0x04];	/* 0x558 - 0x55E */
331 	u16 xmttplatedatalo;	/* 0x560 */
332 	u16 xmttplatedatahi;	/* 0x562 */
333 
334 	u16 PAD[2];		/* 0x564 - 0x566 */
335 
336 	u16 xmtsel;		/* 0x568 */
337 	u16 xmttxcnt;	/* 0x56A */
338 	u16 xmttxshmaddr;	/* 0x56C */
339 
340 	u16 PAD[0x09];	/* 0x56E - 0x57E */
341 
342 	/* TXE1 Block */
343 	u16 PAD[0x40];	/* 0x580 - 0x5FE */
344 
345 	/* TSF Block */
346 	u16 PAD[0X02];	/* 0x600 - 0x602 */
347 	u16 tsf_cfpstrt_l;	/* 0x604 */
348 	u16 tsf_cfpstrt_h;	/* 0x606 */
349 	u16 PAD[0X05];	/* 0x608 - 0x610 */
350 	u16 tsf_cfppretbtt;	/* 0x612 */
351 	u16 PAD[0XD];	/* 0x614 - 0x62C */
352 	u16 tsf_clk_frac_l;	/* 0x62E */
353 	u16 tsf_clk_frac_h;	/* 0x630 */
354 	u16 PAD[0X14];	/* 0x632 - 0x658 */
355 	u16 tsf_random;	/* 0x65A */
356 	u16 PAD[0x05];	/* 0x65C - 0x664 */
357 	/* GPTimer 2 registers */
358 	u16 tsf_gpt2_stat;	/* 0x666 */
359 	u16 tsf_gpt2_ctr_l;	/* 0x668 */
360 	u16 tsf_gpt2_ctr_h;	/* 0x66A */
361 	u16 tsf_gpt2_val_l;	/* 0x66C */
362 	u16 tsf_gpt2_val_h;	/* 0x66E */
363 	u16 tsf_gptall_stat;	/* 0x670 */
364 	u16 PAD[0x07];	/* 0x672 - 0x67E */
365 
366 	/* IFS Block */
367 	u16 ifs_sifs_rx_tx_tx;	/* 0x680 */
368 	u16 ifs_sifs_nav_tx;	/* 0x682 */
369 	u16 ifs_slot;	/* 0x684 */
370 	u16 PAD;		/* 0x686 */
371 	u16 ifs_ctl;		/* 0x688 */
372 	u16 PAD[0x3];	/* 0x68a - 0x68F */
373 	u16 ifsstat;		/* 0x690 */
374 	u16 ifsmedbusyctl;	/* 0x692 */
375 	u16 iftxdur;		/* 0x694 */
376 	u16 PAD[0x3];	/* 0x696 - 0x69b */
377 	/* EDCF support in dot11macs */
378 	u16 ifs_aifsn;	/* 0x69c */
379 	u16 ifs_ctl1;	/* 0x69e */
380 
381 	/* slow clock registers */
382 	u16 scc_ctl;		/* 0x6a0 */
383 	u16 scc_timer_l;	/* 0x6a2 */
384 	u16 scc_timer_h;	/* 0x6a4 */
385 	u16 scc_frac;	/* 0x6a6 */
386 	u16 scc_fastpwrup_dly;	/* 0x6a8 */
387 	u16 scc_per;		/* 0x6aa */
388 	u16 scc_per_frac;	/* 0x6ac */
389 	u16 scc_cal_timer_l;	/* 0x6ae */
390 	u16 scc_cal_timer_h;	/* 0x6b0 */
391 	u16 PAD;		/* 0x6b2 */
392 
393 	u16 PAD[0x26];
394 
395 	/* NAV Block */
396 	u16 nav_ctl;		/* 0x700 */
397 	u16 navstat;		/* 0x702 */
398 	u16 PAD[0x3e];	/* 0x702 - 0x77E */
399 
400 	/* WEP/PMQ Block *//* 0x780 - 0x7FE */
401 	u16 PAD[0x20];	/* 0x780 - 0x7BE */
402 
403 	u16 wepctl;		/* 0x7C0 */
404 	u16 wepivloc;	/* 0x7C2 */
405 	u16 wepivkey;	/* 0x7C4 */
406 	u16 wepwkey;		/* 0x7C6 */
407 
408 	u16 PAD[4];		/* 0x7C8 - 0x7CE */
409 	u16 pcmctl;		/* 0X7D0 */
410 	u16 pcmstat;		/* 0X7D2 */
411 	u16 PAD[6];		/* 0x7D4 - 0x7DE */
412 
413 	u16 pmqctl;		/* 0x7E0 */
414 	u16 pmqstatus;	/* 0x7E2 */
415 	u16 pmqpat0;		/* 0x7E4 */
416 	u16 pmqpat1;		/* 0x7E6 */
417 	u16 pmqpat2;		/* 0x7E8 */
418 
419 	u16 pmqdat;		/* 0x7EA */
420 	u16 pmqdator;	/* 0x7EC */
421 	u16 pmqhst;		/* 0x7EE */
422 	u16 pmqpath0;	/* 0x7F0 */
423 	u16 pmqpath1;	/* 0x7F2 */
424 	u16 pmqpath2;	/* 0x7F4 */
425 	u16 pmqdath;		/* 0x7F6 */
426 
427 	u16 PAD[0x04];	/* 0x7F8 - 0x7FE */
428 
429 	/* SHM *//* 0x800 - 0xEFE */
430 	u16 PAD[0x380];	/* 0x800 - 0xEFE */
431 };
432 
433 /* d11 register field offset */
434 #define D11REGOFFS(field)	offsetof(struct d11regs, field)
435 
436 #define	PIHR_BASE	0x0400	/* byte address of packed IHR region */
437 
438 /* biststatus */
439 #define	BT_DONE		(1U << 31)	/* bist done */
440 #define	BT_B2S		(1 << 30)	/* bist2 ram summary bit */
441 
442 /* intstatus and intmask */
443 #define	I_PC		(1 << 10)	/* pci descriptor error */
444 #define	I_PD		(1 << 11)	/* pci data error */
445 #define	I_DE		(1 << 12)	/* descriptor protocol error */
446 #define	I_RU		(1 << 13)	/* receive descriptor underflow */
447 #define	I_RO		(1 << 14)	/* receive fifo overflow */
448 #define	I_XU		(1 << 15)	/* transmit fifo underflow */
449 #define	I_RI		(1 << 16)	/* receive interrupt */
450 #define	I_XI		(1 << 24)	/* transmit interrupt */
451 
452 /* interrupt receive lazy */
453 #define	IRL_TO_MASK		0x00ffffff	/* timeout */
454 #define	IRL_FC_MASK		0xff000000	/* frame count */
455 #define	IRL_FC_SHIFT		24	/* frame count */
456 
457 /*== maccontrol register ==*/
458 #define	MCTL_GMODE		(1U << 31)
459 #define	MCTL_DISCARD_PMQ	(1 << 30)
460 #define	MCTL_TBTTHOLD		(1 << 28)
461 #define	MCTL_WAKE		(1 << 26)
462 #define	MCTL_HPS		(1 << 25)
463 #define	MCTL_PROMISC		(1 << 24)
464 #define	MCTL_KEEPBADFCS		(1 << 23)
465 #define	MCTL_KEEPCONTROL	(1 << 22)
466 #define	MCTL_PHYLOCK		(1 << 21)
467 #define	MCTL_BCNS_PROMISC	(1 << 20)
468 #define	MCTL_LOCK_RADIO		(1 << 19)
469 #define	MCTL_AP			(1 << 18)
470 #define	MCTL_INFRA		(1 << 17)
471 #define	MCTL_BIGEND		(1 << 16)
472 #define	MCTL_GPOUT_SEL_MASK	(3 << 14)
473 #define	MCTL_GPOUT_SEL_SHIFT	14
474 #define	MCTL_EN_PSMDBG		(1 << 13)
475 #define	MCTL_IHR_EN		(1 << 10)
476 #define	MCTL_SHM_UPPER		(1 <<  9)
477 #define	MCTL_SHM_EN		(1 <<  8)
478 #define	MCTL_PSM_JMP_0		(1 <<  2)
479 #define	MCTL_PSM_RUN		(1 <<  1)
480 #define	MCTL_EN_MAC		(1 <<  0)
481 
482 /*== maccommand register ==*/
483 #define	MCMD_BCN0VLD		(1 <<  0)
484 #define	MCMD_BCN1VLD		(1 <<  1)
485 #define	MCMD_DIRFRMQVAL		(1 <<  2)
486 #define	MCMD_CCA		(1 <<  3)
487 #define	MCMD_BG_NOISE		(1 <<  4)
488 #define	MCMD_SKIP_SHMINIT	(1 <<  5)	/* only used for simulation */
489 #define MCMD_SAMPLECOLL		MCMD_SKIP_SHMINIT /* reuse for sample collect */
490 
491 /*== macintstatus/macintmask ==*/
492 /* gracefully suspended */
493 #define	MI_MACSSPNDD		(1 <<  0)
494 /* beacon template available */
495 #define	MI_BCNTPL		(1 <<  1)
496 /* TBTT indication */
497 #define	MI_TBTT			(1 <<  2)
498 /* beacon successfully tx'd */
499 #define	MI_BCNSUCCESS		(1 <<  3)
500 /* beacon canceled (IBSS) */
501 #define	MI_BCNCANCLD		(1 <<  4)
502 /* end of ATIM-window (IBSS) */
503 #define	MI_ATIMWINEND		(1 <<  5)
504 /* PMQ entries available */
505 #define	MI_PMQ			(1 <<  6)
506 /* non-specific gen-stat bits that are set by PSM */
507 #define	MI_NSPECGEN_0		(1 <<  7)
508 /* non-specific gen-stat bits that are set by PSM */
509 #define	MI_NSPECGEN_1		(1 <<  8)
510 /* MAC level Tx error */
511 #define	MI_MACTXERR		(1 <<  9)
512 /* non-specific gen-stat bits that are set by PSM */
513 #define	MI_NSPECGEN_3		(1 << 10)
514 /* PHY Tx error */
515 #define	MI_PHYTXERR		(1 << 11)
516 /* Power Management Event */
517 #define	MI_PME			(1 << 12)
518 /* General-purpose timer0 */
519 #define	MI_GP0			(1 << 13)
520 /* General-purpose timer1 */
521 #define	MI_GP1			(1 << 14)
522 /* (ORed) DMA-interrupts */
523 #define	MI_DMAINT		(1 << 15)
524 /* MAC has completed a TX FIFO Suspend/Flush */
525 #define	MI_TXSTOP		(1 << 16)
526 /* MAC has completed a CCA measurement */
527 #define	MI_CCA			(1 << 17)
528 /* MAC has collected background noise samples */
529 #define	MI_BG_NOISE		(1 << 18)
530 /* MBSS DTIM TBTT indication */
531 #define	MI_DTIM_TBTT		(1 << 19)
532 /* Probe response queue needs attention */
533 #define MI_PRQ			(1 << 20)
534 /* Radio/PHY has been powered back up. */
535 #define	MI_PWRUP		(1 << 21)
536 #define	MI_RESERVED3		(1 << 22)
537 #define	MI_RESERVED2		(1 << 23)
538 #define MI_RESERVED1		(1 << 25)
539 /* MAC detected change on RF Disable input*/
540 #define MI_RFDISABLE		(1 << 28)
541 /* MAC has completed a TX */
542 #define	MI_TFS			(1 << 29)
543 /* A phy status change wrt G mode */
544 #define	MI_PHYCHANGED		(1 << 30)
545 /* general purpose timeout */
546 #define	MI_TO			(1U << 31)
547 
548 /* Mac capabilities registers */
549 /*== machwcap ==*/
550 #define	MCAP_TKIPMIC		0x80000000	/* TKIP MIC hardware present */
551 
552 /*== pmqhost data ==*/
553 /* data entry of head pmq entry */
554 #define	PMQH_DATA_MASK		0xffff0000
555 /* PM entry for BSS config */
556 #define	PMQH_BSSCFG		0x00100000
557 /* PM Mode OFF: power save off */
558 #define	PMQH_PMOFF		0x00010000
559 /* PM Mode ON: power save on */
560 #define	PMQH_PMON		0x00020000
561 /* Dis-associated or De-authenticated */
562 #define	PMQH_DASAT		0x00040000
563 /* ATIM not acknowledged */
564 #define	PMQH_ATIMFAIL		0x00080000
565 /* delete head entry */
566 #define	PMQH_DEL_ENTRY		0x00000001
567 /* delete head entry to cur read pointer -1 */
568 #define	PMQH_DEL_MULT		0x00000002
569 /* pmq overflow indication */
570 #define	PMQH_OFLO		0x00000004
571 /* entries are present in pmq */
572 #define	PMQH_NOT_EMPTY		0x00000008
573 
574 /*== phydebug ==*/
575 /* phy is asserting carrier sense */
576 #define	PDBG_CRS		(1 << 0)
577 /* phy is taking xmit byte from mac this cycle */
578 #define	PDBG_TXA		(1 << 1)
579 /* mac is instructing the phy to transmit a frame */
580 #define	PDBG_TXF		(1 << 2)
581 /* phy is signalling a transmit Error to the mac */
582 #define	PDBG_TXE		(1 << 3)
583 /* phy detected the end of a valid frame preamble */
584 #define	PDBG_RXF		(1 << 4)
585 /* phy detected the end of a valid PLCP header */
586 #define	PDBG_RXS		(1 << 5)
587 /* rx start not asserted */
588 #define	PDBG_RXFRG		(1 << 6)
589 /* mac is taking receive byte from phy this cycle */
590 #define	PDBG_RXV		(1 << 7)
591 /* RF portion of the radio is disabled */
592 #define	PDBG_RFD		(1 << 16)
593 
594 /*== objaddr register ==*/
595 #define	OBJADDR_SEL_MASK	0x000F0000
596 #define	OBJADDR_UCM_SEL		0x00000000
597 #define	OBJADDR_SHM_SEL		0x00010000
598 #define	OBJADDR_SCR_SEL		0x00020000
599 #define	OBJADDR_IHR_SEL		0x00030000
600 #define	OBJADDR_RCMTA_SEL	0x00040000
601 #define	OBJADDR_SRCHM_SEL	0x00060000
602 #define	OBJADDR_WINC		0x01000000
603 #define	OBJADDR_RINC		0x02000000
604 #define	OBJADDR_AUTO_INC	0x03000000
605 
606 #define	WEP_PCMADDR		0x07d4
607 #define	WEP_PCMDATA		0x07d6
608 
609 /*== frmtxstatus ==*/
610 #define	TXS_V			(1 << 0)	/* valid bit */
611 #define	TXS_STATUS_MASK		0xffff
612 #define	TXS_FID_MASK		0xffff0000
613 #define	TXS_FID_SHIFT		16
614 
615 /*== frmtxstatus2 ==*/
616 #define	TXS_SEQ_MASK		0xffff
617 #define	TXS_PTX_MASK		0xff0000
618 #define	TXS_PTX_SHIFT		16
619 #define	TXS_MU_MASK		0x01000000
620 #define	TXS_MU_SHIFT		24
621 
622 /*== clk_ctl_st ==*/
623 #define CCS_ERSRC_REQ_D11PLL	0x00000100	/* d11 core pll request */
624 #define CCS_ERSRC_REQ_PHYPLL	0x00000200	/* PHY pll request */
625 #define CCS_ERSRC_AVAIL_D11PLL	0x01000000	/* d11 core pll available */
626 #define CCS_ERSRC_AVAIL_PHYPLL	0x02000000	/* PHY pll available */
627 
628 /* HT Cloclk Ctrl and Clock Avail for 4313 */
629 #define CCS_ERSRC_REQ_HT    0x00000010	/* HT avail request */
630 #define CCS_ERSRC_AVAIL_HT  0x00020000	/* HT clock available */
631 
632 /* tsf_cfprep register */
633 #define	CFPREP_CBI_MASK		0xffffffc0
634 #define	CFPREP_CBI_SHIFT	6
635 #define	CFPREP_CFPP		0x00000001
636 
637 /* tx fifo sizes values are in terms of 256 byte blocks */
638 #define TXFIFOCMD_RESET_MASK	(1 << 15)	/* reset */
639 #define TXFIFOCMD_FIFOSEL_SHIFT	8	/* fifo */
640 #define TXFIFO_FIFOTOP_SHIFT	8	/* fifo start */
641 
642 #define TXFIFO_START_BLK16	 65	/* Base address + 32 * 512 B/P */
643 #define TXFIFO_START_BLK	 6	/* Base address + 6 * 256 B */
644 #define TXFIFO_SIZE_UNIT	256	/* one unit corresponds to 256 bytes */
645 #define MBSS16_TEMPLMEM_MINBLKS	65	/* one unit corresponds to 256 bytes */
646 
647 /*== phy versions (PhyVersion:Revision field) ==*/
648 /* analog block version */
649 #define	PV_AV_MASK		0xf000
650 /* analog block version bitfield offset */
651 #define	PV_AV_SHIFT		12
652 /* phy type */
653 #define	PV_PT_MASK		0x0f00
654 /* phy type bitfield offset */
655 #define	PV_PT_SHIFT		8
656 /* phy version */
657 #define	PV_PV_MASK		0x000f
658 #define	PHY_TYPE(v)		((v & PV_PT_MASK) >> PV_PT_SHIFT)
659 
660 /*== phy types (PhyVersion:PhyType field) ==*/
661 #define	PHY_TYPE_N		4	/* N-Phy value */
662 #define	PHY_TYPE_SSN		6	/* SSLPN-Phy value */
663 #define	PHY_TYPE_LCN		8	/* LCN-Phy value */
664 #define	PHY_TYPE_LCNXN		9	/* LCNXN-Phy value */
665 #define	PHY_TYPE_NULL		0xf	/* Invalid Phy value */
666 
667 /*== analog types (PhyVersion:AnalogType field) ==*/
668 #define	ANA_11N_013		5
669 
670 /* 802.11a PLCP header def */
671 struct ofdm_phy_hdr {
672 	u8 rlpt[3];		/* rate, length, parity, tail */
673 	u16 service;
674 	u8 pad;
675 } __packed;
676 
677 #define	D11A_PHY_HDR_GRATE(phdr)	((phdr)->rlpt[0] & 0x0f)
678 #define	D11A_PHY_HDR_GRES(phdr)		(((phdr)->rlpt[0] >> 4) & 0x01)
679 #define	D11A_PHY_HDR_GLENGTH(phdr)	(((u32 *)((phdr)->rlpt) >> 5) & 0x0fff)
680 #define	D11A_PHY_HDR_GPARITY(phdr)	(((phdr)->rlpt[3] >> 1) & 0x01)
681 #define	D11A_PHY_HDR_GTAIL(phdr)	(((phdr)->rlpt[3] >> 2) & 0x3f)
682 
683 /* rate encoded per 802.11a-1999 sec 17.3.4.1 */
684 #define	D11A_PHY_HDR_SRATE(phdr, rate)		\
685 	((phdr)->rlpt[0] = ((phdr)->rlpt[0] & 0xf0) | ((rate) & 0xf))
686 /* set reserved field to zero */
687 #define	D11A_PHY_HDR_SRES(phdr)		((phdr)->rlpt[0] &= 0xef)
688 /* length is number of octets in PSDU */
689 #define	D11A_PHY_HDR_SLENGTH(phdr, length)	\
690 	(*(u32 *)((phdr)->rlpt) = *(u32 *)((phdr)->rlpt) | \
691 	(((length) & 0x0fff) << 5))
692 /* set the tail to all zeros */
693 #define	D11A_PHY_HDR_STAIL(phdr)	((phdr)->rlpt[3] &= 0x03)
694 
695 #define	D11A_PHY_HDR_LEN_L	3	/* low-rate part of PLCP header */
696 #define	D11A_PHY_HDR_LEN_R	2	/* high-rate part of PLCP header */
697 
698 #define	D11A_PHY_TX_DELAY	(2)	/* 2.1 usec */
699 
700 #define	D11A_PHY_HDR_TIME	(4)	/* low-rate part of PLCP header */
701 #define	D11A_PHY_PRE_TIME	(16)
702 #define	D11A_PHY_PREHDR_TIME	(D11A_PHY_PRE_TIME + D11A_PHY_HDR_TIME)
703 
704 /* 802.11b PLCP header def */
705 struct cck_phy_hdr {
706 	u8 signal;
707 	u8 service;
708 	u16 length;
709 	u16 crc;
710 } __packed;
711 
712 #define	D11B_PHY_HDR_LEN	6
713 
714 #define	D11B_PHY_TX_DELAY	(3)	/* 3.4 usec */
715 
716 #define	D11B_PHY_LHDR_TIME	(D11B_PHY_HDR_LEN << 3)
717 #define	D11B_PHY_LPRE_TIME	(144)
718 #define	D11B_PHY_LPREHDR_TIME	(D11B_PHY_LPRE_TIME + D11B_PHY_LHDR_TIME)
719 
720 #define	D11B_PHY_SHDR_TIME	(D11B_PHY_LHDR_TIME >> 1)
721 #define	D11B_PHY_SPRE_TIME	(D11B_PHY_LPRE_TIME >> 1)
722 #define	D11B_PHY_SPREHDR_TIME	(D11B_PHY_SPRE_TIME + D11B_PHY_SHDR_TIME)
723 
724 #define	D11B_PLCP_SIGNAL_LOCKED	(1 << 2)
725 #define	D11B_PLCP_SIGNAL_LE	(1 << 7)
726 
727 #define MIMO_PLCP_MCS_MASK	0x7f	/* mcs index */
728 #define MIMO_PLCP_40MHZ		0x80	/* 40 Hz frame */
729 #define MIMO_PLCP_AMPDU		0x08	/* ampdu */
730 
731 #define BRCMS_GET_CCK_PLCP_LEN(plcp) (plcp[4] + (plcp[5] << 8))
732 #define BRCMS_GET_MIMO_PLCP_LEN(plcp) (plcp[1] + (plcp[2] << 8))
733 #define BRCMS_SET_MIMO_PLCP_LEN(plcp, len) \
734 	do { \
735 		plcp[1] = len & 0xff; \
736 		plcp[2] = ((len >> 8) & 0xff); \
737 	} while (0)
738 
739 #define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
740 #define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU)
741 #define BRCMS_IS_MIMO_PLCP_AMPDU(plcp) (plcp[3] & MIMO_PLCP_AMPDU)
742 
743 /*
744  * The dot11a PLCP header is 5 bytes.  To simplify the software (so that we
745  * don't need e.g. different tx DMA headers for 11a and 11b), the PLCP header
746  * has padding added in the ucode.
747  */
748 #define	D11_PHY_HDR_LEN	6
749 
750 /* TX DMA buffer header */
751 struct d11txh {
752 	__le16 MacTxControlLow;	/* 0x0 */
753 	__le16 MacTxControlHigh;	/* 0x1 */
754 	__le16 MacFrameControl;	/* 0x2 */
755 	__le16 TxFesTimeNormal;	/* 0x3 */
756 	__le16 PhyTxControlWord;	/* 0x4 */
757 	__le16 PhyTxControlWord_1;	/* 0x5 */
758 	__le16 PhyTxControlWord_1_Fbr;	/* 0x6 */
759 	__le16 PhyTxControlWord_1_Rts;	/* 0x7 */
760 	__le16 PhyTxControlWord_1_FbrRts;	/* 0x8 */
761 	__le16 MainRates;	/* 0x9 */
762 	__le16 XtraFrameTypes;	/* 0xa */
763 	u8 IV[16];		/* 0x0b - 0x12 */
764 	u8 TxFrameRA[6];	/* 0x13 - 0x15 */
765 	__le16 TxFesTimeFallback;	/* 0x16 */
766 	u8 RTSPLCPFallback[6];	/* 0x17 - 0x19 */
767 	__le16 RTSDurFallback;	/* 0x1a */
768 	u8 FragPLCPFallback[6];	/* 0x1b - 1d */
769 	__le16 FragDurFallback;	/* 0x1e */
770 	__le16 MModeLen;	/* 0x1f */
771 	__le16 MModeFbrLen;	/* 0x20 */
772 	__le16 TstampLow;	/* 0x21 */
773 	__le16 TstampHigh;	/* 0x22 */
774 	__le16 ABI_MimoAntSel;	/* 0x23 */
775 	__le16 PreloadSize;	/* 0x24 */
776 	__le16 AmpduSeqCtl;	/* 0x25 */
777 	__le16 TxFrameID;	/* 0x26 */
778 	__le16 TxStatus;	/* 0x27 */
779 	__le16 MaxNMpdus;	/* 0x28 */
780 	__le16 MaxABytes_MRT;	/* 0x29 */
781 	__le16 MaxABytes_FBR;	/* 0x2a */
782 	__le16 MinMBytes;	/* 0x2b */
783 	u8 RTSPhyHeader[D11_PHY_HDR_LEN];	/* 0x2c - 0x2e */
784 	struct ieee80211_rts rts_frame;	/* 0x2f - 0x36 */
785 	u16 PAD;		/* 0x37 */
786 } __packed __aligned(2);
787 
788 #define	D11_TXH_LEN		112	/* bytes */
789 
790 /* Frame Types */
791 #define FT_CCK	0
792 #define FT_OFDM	1
793 #define FT_HT	2
794 #define FT_N	3
795 
796 /*
797  * Position of MPDU inside A-MPDU; indicated with bits 10:9
798  * of MacTxControlLow
799  */
800 #define TXC_AMPDU_SHIFT		9	/* shift for ampdu settings */
801 #define TXC_AMPDU_NONE		0	/* Regular MPDU, not an A-MPDU */
802 #define TXC_AMPDU_FIRST		1	/* first MPDU of an A-MPDU */
803 #define TXC_AMPDU_MIDDLE	2	/* intermediate MPDU of an A-MPDU */
804 #define TXC_AMPDU_LAST		3	/* last (or single) MPDU of an A-MPDU */
805 
806 /*== MacTxControlLow ==*/
807 #define TXC_AMIC		0x8000
808 #define	TXC_SENDCTS		0x0800
809 #define TXC_AMPDU_MASK		0x0600
810 #define TXC_BW_40		0x0100
811 #define TXC_FREQBAND_5G		0x0080
812 #define	TXC_DFCS		0x0040
813 #define	TXC_IGNOREPMQ		0x0020
814 #define	TXC_HWSEQ		0x0010
815 #define	TXC_STARTMSDU		0x0008
816 #define	TXC_SENDRTS		0x0004
817 #define	TXC_LONGFRAME		0x0002
818 #define	TXC_IMMEDACK		0x0001
819 
820 /*== MacTxControlHigh ==*/
821 /* RTS fallback preamble type 1 = SHORT 0 = LONG */
822 #define TXC_PREAMBLE_RTS_FB_SHORT	0x8000
823 /* RTS main rate preamble type 1 = SHORT 0 = LONG */
824 #define TXC_PREAMBLE_RTS_MAIN_SHORT	0x4000
825 /*
826  * Main fallback rate preamble type
827  *   1 = SHORT for OFDM/GF for MIMO
828  *   0 = LONG for CCK/MM for MIMO
829  */
830 #define TXC_PREAMBLE_DATA_FB_SHORT	0x2000
831 
832 /* TXC_PREAMBLE_DATA_MAIN is in PhyTxControl bit 5 */
833 /* use fallback rate for this AMPDU */
834 #define	TXC_AMPDU_FBR		0x1000
835 #define	TXC_SECKEY_MASK		0x0FF0
836 #define	TXC_SECKEY_SHIFT	4
837 /* Use alternate txpwr defined at loc. M_ALT_TXPWR_IDX */
838 #define	TXC_ALT_TXPWR		0x0008
839 #define	TXC_SECTYPE_MASK	0x0007
840 #define	TXC_SECTYPE_SHIFT	0
841 
842 /* Null delimiter for Fallback rate */
843 #define AMPDU_FBR_NULL_DELIM  5	/* Location of Null delimiter count for AMPDU */
844 
845 /* PhyTxControl for Mimophy */
846 #define	PHY_TXC_PWR_MASK	0xFC00
847 #define	PHY_TXC_PWR_SHIFT	10
848 #define	PHY_TXC_ANT_MASK	0x03C0	/* bit 6, 7, 8, 9 */
849 #define	PHY_TXC_ANT_SHIFT	6
850 #define	PHY_TXC_ANT_0_1		0x00C0	/* auto, last rx */
851 #define	PHY_TXC_LCNPHY_ANT_LAST	0x0000
852 #define	PHY_TXC_ANT_3		0x0200	/* virtual antenna 3 */
853 #define	PHY_TXC_ANT_2		0x0100	/* virtual antenna 2 */
854 #define	PHY_TXC_ANT_1		0x0080	/* virtual antenna 1 */
855 #define	PHY_TXC_ANT_0		0x0040	/* virtual antenna 0 */
856 #define	PHY_TXC_SHORT_HDR	0x0010
857 
858 #define	PHY_TXC_OLD_ANT_0	0x0000
859 #define	PHY_TXC_OLD_ANT_1	0x0100
860 #define	PHY_TXC_OLD_ANT_LAST	0x0300
861 
862 /* PhyTxControl_1 for Mimophy */
863 #define PHY_TXC1_BW_MASK		0x0007
864 #define PHY_TXC1_BW_10MHZ		0
865 #define PHY_TXC1_BW_10MHZ_UP		1
866 #define PHY_TXC1_BW_20MHZ		2
867 #define PHY_TXC1_BW_20MHZ_UP		3
868 #define PHY_TXC1_BW_40MHZ		4
869 #define PHY_TXC1_BW_40MHZ_DUP		5
870 #define PHY_TXC1_MODE_SHIFT		3
871 #define PHY_TXC1_MODE_MASK		0x0038
872 #define PHY_TXC1_MODE_SISO		0
873 #define PHY_TXC1_MODE_CDD		1
874 #define PHY_TXC1_MODE_STBC		2
875 #define PHY_TXC1_MODE_SDM		3
876 
877 /* PhyTxControl for HTphy that are different from Mimophy */
878 #define	PHY_TXC_HTANT_MASK		0x3fC0	/* bits 6-13 */
879 
880 /* XtraFrameTypes */
881 #define XFTS_RTS_FT_SHIFT	2
882 #define XFTS_FBRRTS_FT_SHIFT	4
883 #define XFTS_CHANNEL_SHIFT	8
884 
885 /* Antenna diversity bit in ant_wr_settle */
886 #define	PHY_AWS_ANTDIV		0x2000
887 
888 /* IFS ctl */
889 #define IFS_USEEDCF	(1 << 2)
890 
891 /* IFS ctl1 */
892 #define IFS_CTL1_EDCRS	(1 << 3)
893 #define IFS_CTL1_EDCRS_20L (1 << 4)
894 #define IFS_CTL1_EDCRS_40 (1 << 5)
895 
896 /* ABI_MimoAntSel */
897 #define ABI_MAS_ADDR_BMP_IDX_MASK	0x0f00
898 #define ABI_MAS_ADDR_BMP_IDX_SHIFT	8
899 #define ABI_MAS_FBR_ANT_PTN_MASK	0x00f0
900 #define ABI_MAS_FBR_ANT_PTN_SHIFT	4
901 #define ABI_MAS_MRT_ANT_PTN_MASK	0x000f
902 
903 /* tx status packet */
904 struct tx_status {
905 	u16 framelen;
906 	u16 PAD;
907 	u16 frameid;
908 	u16 status;
909 	u16 lasttxtime;
910 	u16 sequence;
911 	u16 phyerr;
912 	u16 ackphyrxsh;
913 } __packed;
914 
915 #define	TXSTATUS_LEN	16
916 
917 /* status field bit definitions */
918 #define	TX_STATUS_FRM_RTX_MASK	0xF000
919 #define	TX_STATUS_FRM_RTX_SHIFT	12
920 #define	TX_STATUS_RTS_RTX_MASK	0x0F00
921 #define	TX_STATUS_RTS_RTX_SHIFT	8
922 #define TX_STATUS_MASK		0x00FE
923 #define	TX_STATUS_PMINDCTD	(1 << 7) /* PM mode indicated to AP */
924 #define	TX_STATUS_INTERMEDIATE	(1 << 6) /* intermediate or 1st ampdu pkg */
925 #define	TX_STATUS_AMPDU		(1 << 5) /* AMPDU status */
926 #define TX_STATUS_SUPR_MASK	0x1C	 /* suppress status bits (4:2) */
927 #define TX_STATUS_SUPR_SHIFT	2
928 #define	TX_STATUS_ACK_RCV	(1 << 1) /* ACK received */
929 #define	TX_STATUS_VALID		(1 << 0) /* Tx status valid */
930 #define	TX_STATUS_NO_ACK	0
931 
932 /* suppress status reason codes */
933 #define	TX_STATUS_SUPR_PMQ	(1 << 2) /* PMQ entry */
934 #define	TX_STATUS_SUPR_FLUSH	(2 << 2) /* flush request */
935 #define	TX_STATUS_SUPR_FRAG	(3 << 2) /* previous frag failure */
936 #define	TX_STATUS_SUPR_TBTT	(3 << 2) /* SHARED: Probe resp supr for TBTT */
937 #define	TX_STATUS_SUPR_BADCH	(4 << 2) /* channel mismatch */
938 #define	TX_STATUS_SUPR_EXPTIME	(5 << 2) /* lifetime expiry */
939 #define	TX_STATUS_SUPR_UF	(6 << 2) /* underflow */
940 
941 /* Unexpected tx status for rate update */
942 #define TX_STATUS_UNEXP(status) \
943 	((((status) & TX_STATUS_INTERMEDIATE) != 0) && \
944 	 TX_STATUS_UNEXP_AMPDU(status))
945 
946 /* Unexpected tx status for A-MPDU rate update */
947 #define TX_STATUS_UNEXP_AMPDU(status) \
948 	((((status) & TX_STATUS_SUPR_MASK) != 0) && \
949 	 (((status) & TX_STATUS_SUPR_MASK) != TX_STATUS_SUPR_EXPTIME))
950 
951 #define TX_STATUS_BA_BMAP03_MASK	0xF000	/* ba bitmap 0:3 in 1st pkg */
952 #define TX_STATUS_BA_BMAP03_SHIFT	12	/* ba bitmap 0:3 in 1st pkg */
953 #define TX_STATUS_BA_BMAP47_MASK	0x001E	/* ba bitmap 4:7 in 2nd pkg */
954 #define TX_STATUS_BA_BMAP47_SHIFT	3	/* ba bitmap 4:7 in 2nd pkg */
955 
956 /* RXE (Receive Engine) */
957 
958 /* RCM_CTL */
959 #define	RCM_INC_MASK_H		0x0080
960 #define	RCM_INC_MASK_L		0x0040
961 #define	RCM_INC_DATA		0x0020
962 #define	RCM_INDEX_MASK		0x001F
963 #define	RCM_SIZE		15
964 
965 #define	RCM_MAC_OFFSET		0	/* current MAC address */
966 #define	RCM_BSSID_OFFSET	3	/* current BSSID address */
967 #define	RCM_F_BSSID_0_OFFSET	6	/* foreign BSS CFP tracking */
968 #define	RCM_F_BSSID_1_OFFSET	9	/* foreign BSS CFP tracking */
969 #define	RCM_F_BSSID_2_OFFSET	12	/* foreign BSS CFP tracking */
970 
971 #define RCM_WEP_TA0_OFFSET	16
972 #define RCM_WEP_TA1_OFFSET	19
973 #define RCM_WEP_TA2_OFFSET	22
974 #define RCM_WEP_TA3_OFFSET	25
975 
976 /* PSM Block */
977 
978 /* psm_phy_hdr_param bits */
979 #define MAC_PHY_RESET		1
980 #define MAC_PHY_CLOCK_EN	2
981 #define MAC_PHY_FORCE_CLK	4
982 
983 /* WEP Block */
984 
985 /* WEP_WKEY */
986 #define	WKEY_START		(1 << 8)
987 #define	WKEY_SEL_MASK		0x1F
988 
989 /* WEP data formats */
990 
991 /* the number of RCMTA entries */
992 #define RCMTA_SIZE 50
993 
994 #define M_ADDR_BMP_BLK		(0x37e * 2)
995 #define M_ADDR_BMP_BLK_SZ	12
996 
997 #define ADDR_BMP_RA		(1 << 0)	/* Receiver Address (RA) */
998 #define ADDR_BMP_TA		(1 << 1)	/* Transmitter Address (TA) */
999 #define ADDR_BMP_BSSID		(1 << 2)	/* BSSID */
1000 #define ADDR_BMP_AP		(1 << 3)	/* Infra-BSS Access Point */
1001 #define ADDR_BMP_STA		(1 << 4)	/* Infra-BSS Station */
1002 #define ADDR_BMP_RESERVED1	(1 << 5)
1003 #define ADDR_BMP_RESERVED2	(1 << 6)
1004 #define ADDR_BMP_RESERVED3	(1 << 7)
1005 #define ADDR_BMP_BSS_IDX_MASK	(3 << 8)	/* BSS control block index */
1006 #define ADDR_BMP_BSS_IDX_SHIFT	8
1007 
1008 #define	WSEC_MAX_RCMTA_KEYS	54
1009 
1010 /* max keys in M_TKMICKEYS_BLK */
1011 #define	WSEC_MAX_TKMIC_ENGINE_KEYS		12	/* 8 + 4 default */
1012 
1013 /* max RXE match registers */
1014 #define WSEC_MAX_RXE_KEYS	4
1015 
1016 /* SECKINDXALGO (Security Key Index & Algorithm Block) word format */
1017 /* SKL (Security Key Lookup) */
1018 #define	SKL_ALGO_MASK		0x0007
1019 #define	SKL_ALGO_SHIFT		0
1020 #define	SKL_KEYID_MASK		0x0008
1021 #define	SKL_KEYID_SHIFT		3
1022 #define	SKL_INDEX_MASK		0x03F0
1023 #define	SKL_INDEX_SHIFT		4
1024 #define	SKL_GRP_ALGO_MASK	0x1c00
1025 #define	SKL_GRP_ALGO_SHIFT	10
1026 
1027 /* additional bits defined for IBSS group key support */
1028 #define	SKL_IBSS_INDEX_MASK	0x01F0
1029 #define	SKL_IBSS_INDEX_SHIFT	4
1030 #define	SKL_IBSS_KEYID1_MASK	0x0600
1031 #define	SKL_IBSS_KEYID1_SHIFT	9
1032 #define	SKL_IBSS_KEYID2_MASK	0x1800
1033 #define	SKL_IBSS_KEYID2_SHIFT	11
1034 #define	SKL_IBSS_KEYALGO_MASK	0xE000
1035 #define	SKL_IBSS_KEYALGO_SHIFT	13
1036 
1037 #define	WSEC_MODE_OFF		0
1038 #define	WSEC_MODE_HW		1
1039 #define	WSEC_MODE_SW		2
1040 
1041 #define	WSEC_ALGO_OFF		0
1042 #define	WSEC_ALGO_WEP1		1
1043 #define	WSEC_ALGO_TKIP		2
1044 #define	WSEC_ALGO_AES		3
1045 #define	WSEC_ALGO_WEP128	4
1046 #define	WSEC_ALGO_AES_LEGACY	5
1047 #define	WSEC_ALGO_NALG		6
1048 
1049 #define	AES_MODE_NONE		0
1050 #define	AES_MODE_CCM		1
1051 
1052 /* WEP_CTL (Rev 0) */
1053 #define	WECR0_KEYREG_SHIFT	0
1054 #define	WECR0_KEYREG_MASK	0x7
1055 #define	WECR0_DECRYPT		(1 << 3)
1056 #define	WECR0_IVINLINE		(1 << 4)
1057 #define	WECR0_WEPALG_SHIFT	5
1058 #define	WECR0_WEPALG_MASK	(0x7 << 5)
1059 #define	WECR0_WKEYSEL_SHIFT	8
1060 #define	WECR0_WKEYSEL_MASK	(0x7 << 8)
1061 #define	WECR0_WKEYSTART		(1 << 11)
1062 #define	WECR0_WEPINIT		(1 << 14)
1063 #define	WECR0_ICVERR		(1 << 15)
1064 
1065 /* Frame template map byte offsets */
1066 #define	T_ACTS_TPL_BASE		(0)
1067 #define	T_NULL_TPL_BASE		(0xc * 2)
1068 #define	T_QNULL_TPL_BASE	(0x1c * 2)
1069 #define	T_RR_TPL_BASE		(0x2c * 2)
1070 #define	T_BCN0_TPL_BASE		(0x34 * 2)
1071 #define	T_PRS_TPL_BASE		(0x134 * 2)
1072 #define	T_BCN1_TPL_BASE		(0x234 * 2)
1073 #define T_TX_FIFO_TXRAM_BASE	(T_ACTS_TPL_BASE + \
1074 				 (TXFIFO_START_BLK * TXFIFO_SIZE_UNIT))
1075 
1076 #define T_BA_TPL_BASE		T_QNULL_TPL_BASE /* template area for BA */
1077 
1078 #define T_RAM_ACCESS_SZ		4	/* template ram is 4 byte access only */
1079 
1080 /* Shared Mem byte offsets */
1081 
1082 /* Location where the ucode expects the corerev */
1083 #define	M_MACHW_VER		(0x00b * 2)
1084 
1085 /* Location where the ucode expects the MAC capabilities */
1086 #define	M_MACHW_CAP_L		(0x060 * 2)
1087 #define	M_MACHW_CAP_H	(0x061 * 2)
1088 
1089 /* WME shared memory */
1090 #define M_EDCF_STATUS_OFF	(0x007 * 2)
1091 #define M_TXF_CUR_INDEX		(0x018 * 2)
1092 #define M_EDCF_QINFO		(0x120 * 2)
1093 
1094 /* PS-mode related parameters */
1095 #define	M_DOT11_SLOT		(0x008 * 2)
1096 #define	M_DOT11_DTIMPERIOD	(0x009 * 2)
1097 #define	M_NOSLPZNATDTIM		(0x026 * 2)
1098 
1099 /* Beacon-related parameters */
1100 #define	M_BCN0_FRM_BYTESZ	(0x00c * 2)	/* Bcn 0 template length */
1101 #define	M_BCN1_FRM_BYTESZ	(0x00d * 2)	/* Bcn 1 template length */
1102 #define	M_BCN_TXTSF_OFFSET	(0x00e * 2)
1103 #define	M_TIMBPOS_INBEACON	(0x00f * 2)
1104 #define	M_SFRMTXCNTFBRTHSD	(0x022 * 2)
1105 #define	M_LFRMTXCNTFBRTHSD	(0x023 * 2)
1106 #define	M_BCN_PCTLWD		(0x02a * 2)
1107 #define M_BCN_LI		(0x05b * 2)	/* beacon listen interval */
1108 
1109 /* MAX Rx Frame len */
1110 #define M_MAXRXFRM_LEN		(0x010 * 2)
1111 
1112 /* ACK/CTS related params */
1113 #define	M_RSP_PCTLWD		(0x011 * 2)
1114 
1115 /* Hardware Power Control */
1116 #define M_TXPWR_N		(0x012 * 2)
1117 #define M_TXPWR_TARGET		(0x013 * 2)
1118 #define M_TXPWR_MAX		(0x014 * 2)
1119 #define M_TXPWR_CUR		(0x019 * 2)
1120 
1121 /* Rx-related parameters */
1122 #define	M_RX_PAD_DATA_OFFSET	(0x01a * 2)
1123 
1124 /* WEP Shared mem data */
1125 #define	M_SEC_DEFIVLOC		(0x01e * 2)
1126 #define	M_SEC_VALNUMSOFTMCHTA	(0x01f * 2)
1127 #define	M_PHYVER		(0x028 * 2)
1128 #define	M_PHYTYPE		(0x029 * 2)
1129 #define	M_SECRXKEYS_PTR		(0x02b * 2)
1130 #define	M_TKMICKEYS_PTR		(0x059 * 2)
1131 #define	M_SECKINDXALGO_BLK	(0x2ea * 2)
1132 #define M_SECKINDXALGO_BLK_SZ	54
1133 #define	M_SECPSMRXTAMCH_BLK	(0x2fa * 2)
1134 #define	M_TKIP_TSC_TTAK		(0x18c * 2)
1135 #define	D11_MAX_KEY_SIZE	16
1136 
1137 #define	M_MAX_ANTCNT		(0x02e * 2)	/* antenna swap threshold */
1138 
1139 /* Probe response related parameters */
1140 #define	M_SSIDLEN		(0x024 * 2)
1141 #define	M_PRB_RESP_FRM_LEN	(0x025 * 2)
1142 #define	M_PRS_MAXTIME		(0x03a * 2)
1143 #define	M_SSID			(0xb0 * 2)
1144 #define	M_CTXPRS_BLK		(0xc0 * 2)
1145 #define	C_CTX_PCTLWD_POS	(0x4 * 2)
1146 
1147 /* Delta between OFDM and CCK power in CCK power boost mode */
1148 #define M_OFDM_OFFSET		(0x027 * 2)
1149 
1150 /* TSSI for last 4 11b/g CCK packets transmitted */
1151 #define	M_B_TSSI_0		(0x02c * 2)
1152 #define	M_B_TSSI_1		(0x02d * 2)
1153 
1154 /* Host flags to turn on ucode options */
1155 #define	M_HOST_FLAGS1		(0x02f * 2)
1156 #define	M_HOST_FLAGS2		(0x030 * 2)
1157 #define	M_HOST_FLAGS3		(0x031 * 2)
1158 #define	M_HOST_FLAGS4		(0x03c * 2)
1159 #define	M_HOST_FLAGS5		(0x06a * 2)
1160 #define	M_HOST_FLAGS_SZ		16
1161 
1162 #define M_RADAR_REG		(0x033 * 2)
1163 
1164 /* TSSI for last 4 11a OFDM packets transmitted */
1165 #define	M_A_TSSI_0		(0x034 * 2)
1166 #define	M_A_TSSI_1		(0x035 * 2)
1167 
1168 /* noise interference measurement */
1169 #define M_NOISE_IF_COUNT	(0x034 * 2)
1170 #define M_NOISE_IF_TIMEOUT	(0x035 * 2)
1171 
1172 #define	M_RF_RX_SP_REG1		(0x036 * 2)
1173 
1174 /* TSSI for last 4 11g OFDM packets transmitted */
1175 #define	M_G_TSSI_0		(0x038 * 2)
1176 #define	M_G_TSSI_1		(0x039 * 2)
1177 
1178 /* Background noise measure */
1179 #define	M_JSSI_0		(0x44 * 2)
1180 #define	M_JSSI_1		(0x45 * 2)
1181 #define	M_JSSI_AUX		(0x46 * 2)
1182 
1183 #define	M_CUR_2050_RADIOCODE	(0x47 * 2)
1184 
1185 /* TX fifo sizes */
1186 #define M_FIFOSIZE0		(0x4c * 2)
1187 #define M_FIFOSIZE1		(0x4d * 2)
1188 #define M_FIFOSIZE2		(0x4e * 2)
1189 #define M_FIFOSIZE3		(0x4f * 2)
1190 #define D11_MAX_TX_FRMS		32	/* max frames allowed in tx fifo */
1191 
1192 /* Current channel number plus upper bits */
1193 #define M_CURCHANNEL		(0x50 * 2)
1194 #define D11_CURCHANNEL_5G	0x0100;
1195 #define D11_CURCHANNEL_40	0x0200;
1196 #define D11_CURCHANNEL_MAX	0x00FF;
1197 
1198 /* last posted frameid on the bcmc fifo */
1199 #define M_BCMC_FID		(0x54 * 2)
1200 #define INVALIDFID		0xffff
1201 
1202 /* extended beacon phyctl bytes for 11N */
1203 #define	M_BCN_PCTL1WD		(0x058 * 2)
1204 
1205 /* idle busy ratio to duty_cycle requirement  */
1206 #define M_TX_IDLE_BUSY_RATIO_X_16_CCK  (0x52 * 2)
1207 #define M_TX_IDLE_BUSY_RATIO_X_16_OFDM (0x5A * 2)
1208 
1209 /* CW RSSI for LCNPHY */
1210 #define M_LCN_RSSI_0		0x1332
1211 #define M_LCN_RSSI_1		0x1338
1212 #define M_LCN_RSSI_2		0x133e
1213 #define M_LCN_RSSI_3		0x1344
1214 
1215 /* SNR for LCNPHY */
1216 #define M_LCN_SNR_A_0	0x1334
1217 #define M_LCN_SNR_B_0	0x1336
1218 
1219 #define M_LCN_SNR_A_1	0x133a
1220 #define M_LCN_SNR_B_1	0x133c
1221 
1222 #define M_LCN_SNR_A_2	0x1340
1223 #define M_LCN_SNR_B_2	0x1342
1224 
1225 #define M_LCN_SNR_A_3	0x1346
1226 #define M_LCN_SNR_B_3	0x1348
1227 
1228 #define M_LCN_LAST_RESET	(81*2)
1229 #define M_LCN_LAST_LOC	(63*2)
1230 #define M_LCNPHY_RESET_STATUS (4902)
1231 #define M_LCNPHY_DSC_TIME	(0x98d*2)
1232 #define M_LCNPHY_RESET_CNT_DSC (0x98b*2)
1233 #define M_LCNPHY_RESET_CNT	(0x98c*2)
1234 
1235 /* Rate table offsets */
1236 #define	M_RT_DIRMAP_A		(0xe0 * 2)
1237 #define	M_RT_BBRSMAP_A		(0xf0 * 2)
1238 #define	M_RT_DIRMAP_B		(0x100 * 2)
1239 #define	M_RT_BBRSMAP_B		(0x110 * 2)
1240 
1241 /* Rate table entry offsets */
1242 #define	M_RT_PRS_PLCP_POS	10
1243 #define	M_RT_PRS_DUR_POS	16
1244 #define	M_RT_OFDM_PCTL1_POS	18
1245 
1246 #define M_20IN40_IQ			(0x380 * 2)
1247 
1248 /* SHM locations where ucode stores the current power index */
1249 #define M_CURR_IDX1		(0x384 * 2)
1250 #define M_CURR_IDX2		(0x387 * 2)
1251 
1252 #define M_BSCALE_ANT0	(0x5e * 2)
1253 #define M_BSCALE_ANT1	(0x5f * 2)
1254 
1255 /* Antenna Diversity Testing */
1256 #define M_MIMO_ANTSEL_RXDFLT	(0x63 * 2)
1257 #define M_ANTSEL_CLKDIV	(0x61 * 2)
1258 #define M_MIMO_ANTSEL_TXDFLT	(0x64 * 2)
1259 
1260 #define M_MIMO_MAXSYM	(0x5d * 2)
1261 #define MIMO_MAXSYM_DEF		0x8000	/* 32k */
1262 #define MIMO_MAXSYM_MAX		0xffff	/* 64k */
1263 
1264 #define M_WATCHDOG_8TU		(0x1e * 2)
1265 #define WATCHDOG_8TU_DEF	5
1266 #define WATCHDOG_8TU_MAX	10
1267 
1268 /* Manufacturing Test Variables */
1269 /* PER test mode */
1270 #define M_PKTENG_CTRL		(0x6c * 2)
1271 /* IFS for TX mode */
1272 #define M_PKTENG_IFS		(0x6d * 2)
1273 /* Lower word of tx frmcnt/rx lostcnt */
1274 #define M_PKTENG_FRMCNT_LO	(0x6e * 2)
1275 /* Upper word of tx frmcnt/rx lostcnt */
1276 #define M_PKTENG_FRMCNT_HI	(0x6f * 2)
1277 
1278 /* Index variation in vbat ripple */
1279 #define M_LCN_PWR_IDX_MAX	(0x67 * 2) /* highest index read by ucode */
1280 #define M_LCN_PWR_IDX_MIN	(0x66 * 2) /* lowest index read by ucode */
1281 
1282 /* M_PKTENG_CTRL bit definitions */
1283 #define M_PKTENG_MODE_TX		0x0001
1284 #define M_PKTENG_MODE_TX_RIFS	        0x0004
1285 #define M_PKTENG_MODE_TX_CTS            0x0008
1286 #define M_PKTENG_MODE_RX		0x0002
1287 #define M_PKTENG_MODE_RX_WITH_ACK	0x0402
1288 #define M_PKTENG_MODE_MASK		0x0003
1289 /* TX frames indicated in the frmcnt reg */
1290 #define M_PKTENG_FRMCNT_VLD		0x0100
1291 
1292 /* Sample Collect parameters (bitmap and type) */
1293 /* Trigger bitmap for sample collect */
1294 #define M_SMPL_COL_BMP		(0x37d * 2)
1295 /* Sample collect type */
1296 #define M_SMPL_COL_CTL		(0x3b2 * 2)
1297 
1298 #define ANTSEL_CLKDIV_4MHZ	6
1299 #define MIMO_ANTSEL_BUSY	0x4000	/* bit 14 (busy) */
1300 #define MIMO_ANTSEL_SEL		0x8000	/* bit 15 write the value */
1301 #define MIMO_ANTSEL_WAIT	50	/* 50us wait */
1302 #define MIMO_ANTSEL_OVERRIDE	0x8000	/* flag */
1303 
1304 struct shm_acparams {
1305 	u16 txop;
1306 	u16 cwmin;
1307 	u16 cwmax;
1308 	u16 cwcur;
1309 	u16 aifs;
1310 	u16 bslots;
1311 	u16 reggap;
1312 	u16 status;
1313 	u16 rsvd[8];
1314 } __packed;
1315 #define M_EDCF_QLEN	(16 * 2)
1316 
1317 #define WME_STATUS_NEWAC	(1 << 8)
1318 
1319 /* M_HOST_FLAGS */
1320 #define MHFMAX		5	/* Number of valid hostflag half-word (u16) */
1321 #define MHF1		0	/* Hostflag 1 index */
1322 #define MHF2		1	/* Hostflag 2 index */
1323 #define MHF3		2	/* Hostflag 3 index */
1324 #define MHF4		3	/* Hostflag 4 index */
1325 #define MHF5		4	/* Hostflag 5 index */
1326 
1327 /* Flags in M_HOST_FLAGS */
1328 /* Enable ucode antenna diversity help */
1329 #define	MHF1_ANTDIV		0x0001
1330 /* Enable EDCF access control */
1331 #define	MHF1_EDCF		0x0100
1332 #define MHF1_IQSWAP_WAR		0x0200
1333 /* Disable Slow clock request, for corerev < 11 */
1334 #define	MHF1_FORCEFASTCLK	0x0400
1335 
1336 /* Flags in M_HOST_FLAGS2 */
1337 
1338 /* Flush BCMC FIFO immediately */
1339 #define MHF2_TXBCMC_NOW		0x0040
1340 /* Enable ucode/hw power control */
1341 #define MHF2_HWPWRCTL		0x0080
1342 #define MHF2_NPHY40MHZ_WAR	0x0800
1343 
1344 /* Flags in M_HOST_FLAGS3 */
1345 /* enabled mimo antenna selection */
1346 #define MHF3_ANTSEL_EN		0x0001
1347 /* antenna selection mode: 0: 2x3, 1: 2x4 */
1348 #define MHF3_ANTSEL_MODE	0x0002
1349 #define MHF3_RESERVED1		0x0004
1350 #define MHF3_RESERVED2		0x0008
1351 #define MHF3_NPHY_MLADV_WAR	0x0010
1352 
1353 /* Flags in M_HOST_FLAGS4 */
1354 /* force bphy Tx on core 0 (board level WAR) */
1355 #define MHF4_BPHY_TXCORE0	0x0080
1356 /* for 4313A0 FEM boards */
1357 #define MHF4_EXTPA_ENABLE	0x4000
1358 
1359 /* Flags in M_HOST_FLAGS5 */
1360 #define MHF5_4313_GPIOCTRL	0x0001
1361 #define MHF5_RESERVED1		0x0002
1362 #define MHF5_RESERVED2		0x0004
1363 /* Radio power setting for ucode */
1364 #define	M_RADIO_PWR		(0x32 * 2)
1365 
1366 /* phy noise recorded by ucode right after tx */
1367 #define	M_PHY_NOISE		(0x037 * 2)
1368 #define	PHY_NOISE_MASK		0x00ff
1369 
1370 /*
1371  * Receive Frame Data Header for 802.11b DCF-only frames
1372  *
1373  * RxFrameSize: Actual byte length of the frame data received
1374  * PAD: padding (not used)
1375  * PhyRxStatus_0: PhyRxStatus 15:0
1376  * PhyRxStatus_1: PhyRxStatus 31:16
1377  * PhyRxStatus_2: PhyRxStatus 47:32
1378  * PhyRxStatus_3: PhyRxStatus 63:48
1379  * PhyRxStatus_4: PhyRxStatus 79:64
1380  * PhyRxStatus_5: PhyRxStatus 95:80
1381  * RxStatus1: MAC Rx Status
1382  * RxStatus2: extended MAC Rx status
1383  * RxTSFTime: RxTSFTime time of first MAC symbol + M_PHY_PLCPRX_DLY
1384  * RxChan: gain code, channel radio code, and phy type
1385  */
1386 struct d11rxhdr_le {
1387 	__le16 RxFrameSize;
1388 	u16 PAD;
1389 	__le16 PhyRxStatus_0;
1390 	__le16 PhyRxStatus_1;
1391 	__le16 PhyRxStatus_2;
1392 	__le16 PhyRxStatus_3;
1393 	__le16 PhyRxStatus_4;
1394 	__le16 PhyRxStatus_5;
1395 	__le16 RxStatus1;
1396 	__le16 RxStatus2;
1397 	__le16 RxTSFTime;
1398 	__le16 RxChan;
1399 } __packed;
1400 
1401 struct d11rxhdr {
1402 	u16 RxFrameSize;
1403 	u16 PAD;
1404 	u16 PhyRxStatus_0;
1405 	u16 PhyRxStatus_1;
1406 	u16 PhyRxStatus_2;
1407 	u16 PhyRxStatus_3;
1408 	u16 PhyRxStatus_4;
1409 	u16 PhyRxStatus_5;
1410 	u16 RxStatus1;
1411 	u16 RxStatus2;
1412 	u16 RxTSFTime;
1413 	u16 RxChan;
1414 } __packed;
1415 
1416 /* PhyRxStatus_0: */
1417 /* NPHY only: CCK, OFDM, preN, N */
1418 #define	PRXS0_FT_MASK		0x0003
1419 /* NPHY only: clip count adjustment steps by AGC */
1420 #define	PRXS0_CLIP_MASK		0x000C
1421 #define	PRXS0_CLIP_SHIFT	2
1422 /* PHY received a frame with unsupported rate */
1423 #define	PRXS0_UNSRATE		0x0010
1424 /* GPHY: rx ant, NPHY: upper sideband */
1425 #define	PRXS0_RXANT_UPSUBBAND	0x0020
1426 /* CCK frame only: lost crs during cck frame reception */
1427 #define	PRXS0_LCRS		0x0040
1428 /* Short Preamble */
1429 #define	PRXS0_SHORTH		0x0080
1430 /* PLCP violation */
1431 #define	PRXS0_PLCPFV		0x0100
1432 /* PLCP header integrity check failed */
1433 #define	PRXS0_PLCPHCF		0x0200
1434 /* legacy PHY gain control */
1435 #define	PRXS0_GAIN_CTL		0x4000
1436 /* NPHY: Antennas used for received frame, bitmask */
1437 #define PRXS0_ANTSEL_MASK	0xF000
1438 #define PRXS0_ANTSEL_SHIFT	0x12
1439 
1440 /* subfield PRXS0_FT_MASK */
1441 #define	PRXS0_CCK		0x0000
1442 /* valid only for G phy, use rxh->RxChan for A phy */
1443 #define	PRXS0_OFDM		0x0001
1444 #define	PRXS0_PREN		0x0002
1445 #define	PRXS0_STDN		0x0003
1446 
1447 /* subfield PRXS0_ANTSEL_MASK */
1448 #define PRXS0_ANTSEL_0		0x0	/* antenna 0 is used */
1449 #define PRXS0_ANTSEL_1		0x2	/* antenna 1 is used */
1450 #define PRXS0_ANTSEL_2		0x4	/* antenna 2 is used */
1451 #define PRXS0_ANTSEL_3		0x8	/* antenna 3 is used */
1452 
1453 /* PhyRxStatus_1: */
1454 #define	PRXS1_JSSI_MASK		0x00FF
1455 #define	PRXS1_JSSI_SHIFT	0
1456 #define	PRXS1_SQ_MASK		0xFF00
1457 #define	PRXS1_SQ_SHIFT		8
1458 
1459 /* nphy PhyRxStatus_1: */
1460 #define PRXS1_nphy_PWR0_MASK	0x00FF
1461 #define PRXS1_nphy_PWR1_MASK	0xFF00
1462 
1463 /* HTPHY Rx Status defines */
1464 /* htphy PhyRxStatus_0: those bit are overlapped with PhyRxStatus_0 */
1465 #define PRXS0_BAND	        0x0400	/* 0 = 2.4G, 1 = 5G */
1466 #define PRXS0_RSVD	        0x0800	/* reserved; set to 0 */
1467 #define PRXS0_UNUSED	        0xF000	/* unused and not defined; set to 0 */
1468 
1469 /* htphy PhyRxStatus_1: */
1470 /* core enables for {3..0}, 0=disabled, 1=enabled */
1471 #define PRXS1_HTPHY_CORE_MASK	0x000F
1472 /* antenna configuration */
1473 #define PRXS1_HTPHY_ANTCFG_MASK	0x00F0
1474 /* Mixmode PLCP Length low byte mask */
1475 #define PRXS1_HTPHY_MMPLCPLenL_MASK	0xFF00
1476 
1477 /* htphy PhyRxStatus_2: */
1478 /* Mixmode PLCP Length high byte maskw */
1479 #define PRXS2_HTPHY_MMPLCPLenH_MASK	0x000F
1480 /* Mixmode PLCP rate mask */
1481 #define PRXS2_HTPHY_MMPLCH_RATE_MASK	0x00F0
1482 /* Rx power on core 0 */
1483 #define PRXS2_HTPHY_RXPWR_ANT0	0xFF00
1484 
1485 /* htphy PhyRxStatus_3: */
1486 /* Rx power on core 1 */
1487 #define PRXS3_HTPHY_RXPWR_ANT1	0x00FF
1488 /* Rx power on core 2 */
1489 #define PRXS3_HTPHY_RXPWR_ANT2	0xFF00
1490 
1491 /* htphy PhyRxStatus_4: */
1492 /* Rx power on core 3 */
1493 #define PRXS4_HTPHY_RXPWR_ANT3	0x00FF
1494 /* Coarse frequency offset */
1495 #define PRXS4_HTPHY_CFO		0xFF00
1496 
1497 /* htphy PhyRxStatus_5: */
1498 /* Fine frequency offset */
1499 #define PRXS5_HTPHY_FFO	        0x00FF
1500 /* Advance Retard */
1501 #define PRXS5_HTPHY_AR	        0xFF00
1502 
1503 #define HTPHY_MMPLCPLen(rxs) \
1504 	((((rxs)->PhyRxStatus_1 & PRXS1_HTPHY_MMPLCPLenL_MASK) >> 8) | \
1505 	(((rxs)->PhyRxStatus_2 & PRXS2_HTPHY_MMPLCPLenH_MASK) << 8))
1506 /* Get Rx power on core 0 */
1507 #define HTPHY_RXPWR_ANT0(rxs) \
1508 	((((rxs)->PhyRxStatus_2) & PRXS2_HTPHY_RXPWR_ANT0) >> 8)
1509 /* Get Rx power on core 1 */
1510 #define HTPHY_RXPWR_ANT1(rxs) \
1511 	(((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT1)
1512 /* Get Rx power on core 2 */
1513 #define HTPHY_RXPWR_ANT2(rxs) \
1514 	((((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT2) >> 8)
1515 
1516 /* ucode RxStatus1: */
1517 #define	RXS_BCNSENT		0x8000
1518 #define	RXS_SECKINDX_MASK	0x07e0
1519 #define	RXS_SECKINDX_SHIFT	5
1520 #define	RXS_DECERR		(1 << 4)
1521 #define	RXS_DECATMPT		(1 << 3)
1522 /* PAD bytes to make IP data 4 bytes aligned */
1523 #define	RXS_PBPRES		(1 << 2)
1524 #define	RXS_RESPFRAMETX		(1 << 1)
1525 #define	RXS_FCSERR		(1 << 0)
1526 
1527 /* ucode RxStatus2: */
1528 #define RXS_AMSDU_MASK		1
1529 #define	RXS_AGGTYPE_MASK	0x6
1530 #define	RXS_AGGTYPE_SHIFT	1
1531 #define	RXS_PHYRXST_VALID	(1 << 8)
1532 #define RXS_RXANT_MASK		0x3
1533 #define RXS_RXANT_SHIFT		12
1534 
1535 /* RxChan */
1536 #define RXS_CHAN_40		0x1000
1537 #define RXS_CHAN_5G		0x0800
1538 #define	RXS_CHAN_ID_MASK	0x07f8
1539 #define	RXS_CHAN_ID_SHIFT	3
1540 #define	RXS_CHAN_PHYTYPE_MASK	0x0007
1541 #define	RXS_CHAN_PHYTYPE_SHIFT	0
1542 
1543 /* Index of attenuations used during ucode power control. */
1544 #define M_PWRIND_BLKS	(0x184 * 2)
1545 #define M_PWRIND_MAP0	(M_PWRIND_BLKS + 0x0)
1546 #define M_PWRIND_MAP1	(M_PWRIND_BLKS + 0x2)
1547 #define M_PWRIND_MAP2	(M_PWRIND_BLKS + 0x4)
1548 #define M_PWRIND_MAP3	(M_PWRIND_BLKS + 0x6)
1549 /* M_PWRIND_MAP(core) macro */
1550 #define M_PWRIND_MAP(core)  (M_PWRIND_BLKS + ((core)<<1))
1551 
1552 /* PSM SHM variable offsets */
1553 #define	M_PSM_SOFT_REGS	0x0
1554 #define	M_BOM_REV_MAJOR	(M_PSM_SOFT_REGS + 0x0)
1555 #define	M_BOM_REV_MINOR	(M_PSM_SOFT_REGS + 0x2)
1556 #define	M_UCODE_DBGST	(M_PSM_SOFT_REGS + 0x40) /* ucode debug status code */
1557 #define	M_UCODE_MACSTAT	(M_PSM_SOFT_REGS + 0xE0) /* macstat counters */
1558 
1559 #define M_AGING_THRSH	(0x3e * 2) /* max time waiting for medium before tx */
1560 #define	M_MBURST_SIZE	(0x40 * 2) /* max frames in a frameburst */
1561 #define	M_MBURST_TXOP	(0x41 * 2) /* max frameburst TXOP in unit of us */
1562 #define M_SYNTHPU_DLY	(0x4a * 2) /* pre-wakeup for synthpu, default: 500 */
1563 #define	M_PRETBTT	(0x4b * 2)
1564 
1565 /* offset to the target txpwr */
1566 #define M_ALT_TXPWR_IDX		(M_PSM_SOFT_REGS + (0x3b * 2))
1567 #define M_PHY_TX_FLT_PTR	(M_PSM_SOFT_REGS + (0x3d * 2))
1568 #define M_CTS_DURATION		(M_PSM_SOFT_REGS + (0x5c * 2))
1569 #define M_LP_RCCAL_OVR		(M_PSM_SOFT_REGS + (0x6b * 2))
1570 
1571 /* PKTENG Rx Stats Block */
1572 #define M_RXSTATS_BLK_PTR	(M_PSM_SOFT_REGS + (0x65 * 2))
1573 
1574 /* ucode debug status codes */
1575 /* not valid really */
1576 #define	DBGST_INACTIVE		0
1577 /* after zeroing SHM, before suspending at init */
1578 #define	DBGST_INIT		1
1579 /* "normal" state */
1580 #define	DBGST_ACTIVE		2
1581 /* suspended */
1582 #define	DBGST_SUSPENDED		3
1583 /* asleep (PS mode) */
1584 #define	DBGST_ASLEEP		4
1585 
1586 /* Scratch Reg defs */
1587 enum _ePsmScratchPadRegDefinitions {
1588 	S_RSV0 = 0,
1589 	S_RSV1,
1590 	S_RSV2,
1591 
1592 	/* offset 0x03: scratch registers for Dot11-contants */
1593 	S_DOT11_CWMIN,		/* CW-minimum */
1594 	S_DOT11_CWMAX,		/* CW-maximum */
1595 	S_DOT11_CWCUR,		/* CW-current */
1596 	S_DOT11_SRC_LMT,	/* short retry count limit */
1597 	S_DOT11_LRC_LMT,	/* long retry count limit */
1598 	S_DOT11_DTIMCOUNT,	/* DTIM-count */
1599 
1600 	/* offset 0x09: Tx-side scratch registers */
1601 	S_SEQ_NUM,		/* hardware sequence number reg */
1602 	S_SEQ_NUM_FRAG,		/* seq num for frags (at the start of MSDU) */
1603 	S_FRMRETX_CNT,		/* frame retx count */
1604 	S_SSRC,			/* Station short retry count */
1605 	S_SLRC,			/* Station long retry count */
1606 	S_EXP_RSP,		/* Expected response frame */
1607 	S_OLD_BREM,		/* Remaining backoff ctr */
1608 	S_OLD_CWWIN,		/* saved-off CW-cur */
1609 	S_TXECTL,		/* TXE-Ctl word constructed in scr-pad */
1610 	S_CTXTST,		/* frm type-subtype as read from Tx-descr */
1611 
1612 	/* offset 0x13: Rx-side scratch registers */
1613 	S_RXTST,		/* Type and subtype in Rxframe */
1614 
1615 	/* Global state register */
1616 	S_STREG,		/* state storage actual bit maps below */
1617 
1618 	S_TXPWR_SUM,		/* Tx power control: accumulator */
1619 	S_TXPWR_ITER,		/* Tx power control: iteration */
1620 	S_RX_FRMTYPE,		/* Rate and PHY type for frames */
1621 	S_THIS_AGG,		/* Size of this AGG (A-MSDU) */
1622 
1623 	S_KEYINDX,
1624 	S_RXFRMLEN,		/* Receive MPDU length in bytes */
1625 
1626 	/* offset 0x1B: Receive TSF time stored in SCR */
1627 	S_RXTSFTMRVAL_WD3,	/* TSF value at the start of rx */
1628 	S_RXTSFTMRVAL_WD2,	/* TSF value at the start of rx */
1629 	S_RXTSFTMRVAL_WD1,	/* TSF value at the start of rx */
1630 	S_RXTSFTMRVAL_WD0,	/* TSF value at the start of rx */
1631 	S_RXSSN,		/* Received start seq number for A-MPDU BA */
1632 	S_RXQOSFLD,		/* Rx-QoS field (if present) */
1633 
1634 	/* offset 0x21: Scratch pad regs used in microcode as temp storage */
1635 	S_TMP0,			/* stmp0 */
1636 	S_TMP1,			/* stmp1 */
1637 	S_TMP2,			/* stmp2 */
1638 	S_TMP3,			/* stmp3 */
1639 	S_TMP4,			/* stmp4 */
1640 	S_TMP5,			/* stmp5 */
1641 	S_PRQPENALTY_CTR,	/* Probe response queue penalty counter */
1642 	S_ANTCNT,		/* unsuccessful attempts on current ant. */
1643 	S_SYMBOL,		/* flag for possible symbol ctl frames */
1644 	S_RXTP,			/* rx frame type */
1645 	S_STREG2,		/* extra state storage */
1646 	S_STREG3,		/* even more extra state storage */
1647 	S_STREG4,		/* ... */
1648 	S_STREG5,		/* remember to initialize it to zero */
1649 
1650 	S_ADJPWR_IDX,
1651 	S_CUR_PTR,		/* Temp pointer for A-MPDU re-Tx SHM table */
1652 	S_REVID4,		/* 0x33 */
1653 	S_INDX,			/* 0x34 */
1654 	S_ADDR0,		/* 0x35 */
1655 	S_ADDR1,		/* 0x36 */
1656 	S_ADDR2,		/* 0x37 */
1657 	S_ADDR3,		/* 0x38 */
1658 	S_ADDR4,		/* 0x39 */
1659 	S_ADDR5,		/* 0x3A */
1660 	S_TMP6,			/* 0x3B */
1661 	S_KEYINDX_BU,		/* Backup for Key index */
1662 	S_MFGTEST_TMP0,		/* Temp regs used for RX test calculations */
1663 	S_RXESN,		/* Received end sequence number for A-MPDU BA */
1664 	S_STREG6,		/* 0x3F */
1665 };
1666 
1667 #define S_BEACON_INDX	S_OLD_BREM
1668 #define S_PRS_INDX	S_OLD_CWWIN
1669 #define S_PHYTYPE	S_SSRC
1670 #define S_PHYVER	S_SLRC
1671 
1672 /* IHR SLOW_CTRL values */
1673 #define SLOW_CTRL_PDE		(1 << 0)
1674 #define SLOW_CTRL_FD		(1 << 8)
1675 
1676 /* ucode mac statistic counters in shared memory */
1677 struct macstat {
1678 	u16 txallfrm;	/* 0x80 */
1679 	u16 txrtsfrm;	/* 0x82 */
1680 	u16 txctsfrm;	/* 0x84 */
1681 	u16 txackfrm;	/* 0x86 */
1682 	u16 txdnlfrm;	/* 0x88 */
1683 	u16 txbcnfrm;	/* 0x8a */
1684 	u16 txfunfl[8];	/* 0x8c - 0x9b */
1685 	u16 txtplunfl;	/* 0x9c */
1686 	u16 txphyerr;	/* 0x9e */
1687 	u16 pktengrxducast;	/* 0xa0 */
1688 	u16 pktengrxdmcast;	/* 0xa2 */
1689 	u16 rxfrmtoolong;	/* 0xa4 */
1690 	u16 rxfrmtooshrt;	/* 0xa6 */
1691 	u16 rxinvmachdr;	/* 0xa8 */
1692 	u16 rxbadfcs;	/* 0xaa */
1693 	u16 rxbadplcp;	/* 0xac */
1694 	u16 rxcrsglitch;	/* 0xae */
1695 	u16 rxstrt;		/* 0xb0 */
1696 	u16 rxdfrmucastmbss;	/* 0xb2 */
1697 	u16 rxmfrmucastmbss;	/* 0xb4 */
1698 	u16 rxcfrmucast;	/* 0xb6 */
1699 	u16 rxrtsucast;	/* 0xb8 */
1700 	u16 rxctsucast;	/* 0xba */
1701 	u16 rxackucast;	/* 0xbc */
1702 	u16 rxdfrmocast;	/* 0xbe */
1703 	u16 rxmfrmocast;	/* 0xc0 */
1704 	u16 rxcfrmocast;	/* 0xc2 */
1705 	u16 rxrtsocast;	/* 0xc4 */
1706 	u16 rxctsocast;	/* 0xc6 */
1707 	u16 rxdfrmmcast;	/* 0xc8 */
1708 	u16 rxmfrmmcast;	/* 0xca */
1709 	u16 rxcfrmmcast;	/* 0xcc */
1710 	u16 rxbeaconmbss;	/* 0xce */
1711 	u16 rxdfrmucastobss;	/* 0xd0 */
1712 	u16 rxbeaconobss;	/* 0xd2 */
1713 	u16 rxrsptmout;	/* 0xd4 */
1714 	u16 bcntxcancl;	/* 0xd6 */
1715 	u16 PAD;
1716 	u16 rxf0ovfl;	/* 0xda */
1717 	u16 rxf1ovfl;	/* 0xdc */
1718 	u16 rxf2ovfl;	/* 0xde */
1719 	u16 txsfovfl;	/* 0xe0 */
1720 	u16 pmqovfl;		/* 0xe2 */
1721 	u16 rxcgprqfrm;	/* 0xe4 */
1722 	u16 rxcgprsqovfl;	/* 0xe6 */
1723 	u16 txcgprsfail;	/* 0xe8 */
1724 	u16 txcgprssuc;	/* 0xea */
1725 	u16 prs_timeout;	/* 0xec */
1726 	u16 rxnack;
1727 	u16 frmscons;
1728 	u16 txnack;
1729 	u16 txglitch_nack;
1730 	u16 txburst;		/* 0xf6 # tx bursts */
1731 	u16 bphy_rxcrsglitch;	/* bphy rx crs glitch */
1732 	u16 phywatchdog;	/* 0xfa # of phy watchdog events */
1733 	u16 PAD;
1734 	u16 bphy_badplcp;	/* bphy bad plcp */
1735 };
1736 
1737 /* dot11 core-specific control flags */
1738 #define	SICF_PCLKE		0x0004	/* PHY clock enable */
1739 #define	SICF_PRST		0x0008	/* PHY reset */
1740 #define	SICF_MPCLKE		0x0010	/* MAC PHY clockcontrol enable */
1741 #define	SICF_FREF		0x0020	/* PLL FreqRefSelect */
1742 /* NOTE: the following bw bits only apply when the core is attached
1743  * to a NPHY
1744  */
1745 #define	SICF_BWMASK		0x00c0	/* phy clock mask (b6 & b7) */
1746 #define	SICF_BW40		0x0080	/* 40MHz BW (160MHz phyclk) */
1747 #define	SICF_BW20		0x0040	/* 20MHz BW (80MHz phyclk) */
1748 #define	SICF_BW10		0x0000	/* 10MHz BW (40MHz phyclk) */
1749 #define	SICF_GMODE		0x2000	/* gmode enable */
1750 
1751 /* dot11 core-specific status flags */
1752 #define	SISF_2G_PHY		0x0001	/* 2.4G capable phy */
1753 #define	SISF_5G_PHY		0x0002	/* 5G capable phy */
1754 #define	SISF_FCLKA		0x0004	/* FastClkAvailable */
1755 #define	SISF_DB_PHY		0x0008	/* Dualband phy */
1756 
1757 /* === End of MAC reg, Beginning of PHY(b/a/g/n) reg === */
1758 /* radio and LPPHY regs are separated */
1759 
1760 #define	BPHY_REG_OFT_BASE	0x0
1761 /* offsets for indirect access to bphy registers */
1762 #define	BPHY_BB_CONFIG		0x01
1763 #define	BPHY_ADCBIAS		0x02
1764 #define	BPHY_ANACORE		0x03
1765 #define	BPHY_PHYCRSTH		0x06
1766 #define	BPHY_TEST		0x0a
1767 #define	BPHY_PA_TX_TO		0x10
1768 #define	BPHY_SYNTH_DC_TO	0x11
1769 #define	BPHY_PA_TX_TIME_UP	0x12
1770 #define	BPHY_RX_FLTR_TIME_UP	0x13
1771 #define	BPHY_TX_POWER_OVERRIDE	0x14
1772 #define	BPHY_RF_OVERRIDE	0x15
1773 #define	BPHY_RF_TR_LOOKUP1	0x16
1774 #define	BPHY_RF_TR_LOOKUP2	0x17
1775 #define	BPHY_COEFFS		0x18
1776 #define	BPHY_PLL_OUT		0x19
1777 #define	BPHY_REFRESH_MAIN	0x1a
1778 #define	BPHY_REFRESH_TO0	0x1b
1779 #define	BPHY_REFRESH_TO1	0x1c
1780 #define	BPHY_RSSI_TRESH		0x20
1781 #define	BPHY_IQ_TRESH_HH	0x21
1782 #define	BPHY_IQ_TRESH_H		0x22
1783 #define	BPHY_IQ_TRESH_L		0x23
1784 #define	BPHY_IQ_TRESH_LL	0x24
1785 #define	BPHY_GAIN		0x25
1786 #define	BPHY_LNA_GAIN_RANGE	0x26
1787 #define	BPHY_JSSI		0x27
1788 #define	BPHY_TSSI_CTL		0x28
1789 #define	BPHY_TSSI		0x29
1790 #define	BPHY_TR_LOSS_CTL	0x2a
1791 #define	BPHY_LO_LEAKAGE		0x2b
1792 #define	BPHY_LO_RSSI_ACC	0x2c
1793 #define	BPHY_LO_IQMAG_ACC	0x2d
1794 #define	BPHY_TX_DC_OFF1		0x2e
1795 #define	BPHY_TX_DC_OFF2		0x2f
1796 #define	BPHY_PEAK_CNT_THRESH	0x30
1797 #define	BPHY_FREQ_OFFSET	0x31
1798 #define	BPHY_DIVERSITY_CTL	0x32
1799 #define	BPHY_PEAK_ENERGY_LO	0x33
1800 #define	BPHY_PEAK_ENERGY_HI	0x34
1801 #define	BPHY_SYNC_CTL		0x35
1802 #define	BPHY_TX_PWR_CTRL	0x36
1803 #define BPHY_TX_EST_PWR		0x37
1804 #define	BPHY_STEP		0x38
1805 #define	BPHY_WARMUP		0x39
1806 #define	BPHY_LMS_CFF_READ	0x3a
1807 #define	BPHY_LMS_COEFF_I	0x3b
1808 #define	BPHY_LMS_COEFF_Q	0x3c
1809 #define	BPHY_SIG_POW		0x3d
1810 #define	BPHY_RFDC_CANCEL_CTL	0x3e
1811 #define	BPHY_HDR_TYPE		0x40
1812 #define	BPHY_SFD_TO		0x41
1813 #define	BPHY_SFD_CTL		0x42
1814 #define	BPHY_DEBUG		0x43
1815 #define	BPHY_RX_DELAY_COMP	0x44
1816 #define	BPHY_CRS_DROP_TO	0x45
1817 #define	BPHY_SHORT_SFD_NZEROS	0x46
1818 #define	BPHY_DSSS_COEFF1	0x48
1819 #define	BPHY_DSSS_COEFF2	0x49
1820 #define	BPHY_CCK_COEFF1		0x4a
1821 #define	BPHY_CCK_COEFF2		0x4b
1822 #define	BPHY_TR_CORR		0x4c
1823 #define	BPHY_ANGLE_SCALE	0x4d
1824 #define	BPHY_TX_PWR_BASE_IDX	0x4e
1825 #define	BPHY_OPTIONAL_MODES2	0x4f
1826 #define	BPHY_CCK_LMS_STEP	0x50
1827 #define	BPHY_BYPASS		0x51
1828 #define	BPHY_CCK_DELAY_LONG	0x52
1829 #define	BPHY_CCK_DELAY_SHORT	0x53
1830 #define	BPHY_PPROC_CHAN_DELAY	0x54
1831 #define	BPHY_DDFS_ENABLE	0x58
1832 #define	BPHY_PHASE_SCALE	0x59
1833 #define	BPHY_FREQ_CONTROL	0x5a
1834 #define	BPHY_LNA_GAIN_RANGE_10	0x5b
1835 #define	BPHY_LNA_GAIN_RANGE_32	0x5c
1836 #define	BPHY_OPTIONAL_MODES	0x5d
1837 #define	BPHY_RX_STATUS2		0x5e
1838 #define	BPHY_RX_STATUS3		0x5f
1839 #define	BPHY_DAC_CONTROL	0x60
1840 #define	BPHY_ANA11G_FILT_CTRL	0x62
1841 #define	BPHY_REFRESH_CTRL	0x64
1842 #define	BPHY_RF_OVERRIDE2	0x65
1843 #define	BPHY_SPUR_CANCEL_CTRL	0x66
1844 #define	BPHY_FINE_DIGIGAIN_CTRL	0x67
1845 #define	BPHY_RSSI_LUT		0x88
1846 #define	BPHY_RSSI_LUT_END	0xa7
1847 #define	BPHY_TSSI_LUT		0xa8
1848 #define	BPHY_TSSI_LUT_END	0xc7
1849 #define	BPHY_TSSI2PWR_LUT	0x380
1850 #define	BPHY_TSSI2PWR_LUT_END	0x39f
1851 #define	BPHY_LOCOMP_LUT		0x3a0
1852 #define	BPHY_LOCOMP_LUT_END	0x3bf
1853 #define	BPHY_TXGAIN_LUT		0x3c0
1854 #define	BPHY_TXGAIN_LUT_END	0x3ff
1855 
1856 /* Bits in BB_CONFIG: */
1857 #define	PHY_BBC_ANT_MASK	0x0180
1858 #define	PHY_BBC_ANT_SHIFT	7
1859 #define	BB_DARWIN		0x1000
1860 #define BBCFG_RESETCCA		0x4000
1861 #define BBCFG_RESETRX		0x8000
1862 
1863 /* Bits in phytest(0x0a): */
1864 #define	TST_DDFS		0x2000
1865 #define	TST_TXFILT1		0x0800
1866 #define	TST_UNSCRAM		0x0400
1867 #define	TST_CARR_SUPP		0x0200
1868 #define	TST_DC_COMP_LOOP	0x0100
1869 #define	TST_LOOPBACK		0x0080
1870 #define	TST_TXFILT0		0x0040
1871 #define	TST_TXTEST_ENABLE	0x0020
1872 #define	TST_TXTEST_RATE		0x0018
1873 #define	TST_TXTEST_PHASE	0x0007
1874 
1875 /* phytest txTestRate values */
1876 #define	TST_TXTEST_RATE_1MBPS	0
1877 #define	TST_TXTEST_RATE_2MBPS	1
1878 #define	TST_TXTEST_RATE_5_5MBPS	2
1879 #define	TST_TXTEST_RATE_11MBPS	3
1880 #define	TST_TXTEST_RATE_SHIFT	3
1881 
1882 #define SHM_BYT_CNT	0x2	/* IHR location */
1883 #define MAX_BYT_CNT	0x600	/* Maximum frame len */
1884 
1885 struct d11cnt {
1886 	u32 txfrag;
1887 	u32 txmulti;
1888 	u32 txfail;
1889 	u32 txretry;
1890 	u32 txretrie;
1891 	u32 rxdup;
1892 	u32 txrts;
1893 	u32 txnocts;
1894 	u32 txnoack;
1895 	u32 rxfrag;
1896 	u32 rxmulti;
1897 	u32 rxcrc;
1898 	u32 txfrmsnt;
1899 	u32 rxundec;
1900 };
1901 
1902 #endif				/* _BRCM_D11_H_ */
1903