1 /* 2 * Copyright 2019-2021 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 * Authors: AMD 23 * 24 */ 25 26 #include "resource.h" 27 #include "clk_mgr.h" 28 #include "dcn31/dcn31_resource.h" 29 #include "dcn315/dcn315_resource.h" 30 #include "dcn316/dcn316_resource.h" 31 32 #include "dml/dcn20/dcn20_fpu.h" 33 #include "dcn31_fpu.h" 34 35 /** 36 * DOC: DCN31x FPU manipulation Overview 37 * 38 * The DCN architecture relies on FPU operations, which require special 39 * compilation flags and the use of kernel_fpu_begin/end functions; ideally, we 40 * want to avoid spreading FPU access across multiple files. With this idea in 41 * mind, this file aims to centralize all DCN3.1.x functions that require FPU 42 * access in a single place. Code in this file follows the following code 43 * pattern: 44 * 45 * 1. Functions that use FPU operations should be isolated in static functions. 46 * 2. The FPU functions should have the noinline attribute to ensure anything 47 * that deals with FP register is contained within this call. 48 * 3. All function that needs to be accessed outside this file requires a 49 * public interface that not uses any FPU reference. 50 * 4. Developers **must not** use DC_FP_START/END in this file, but they need 51 * to ensure that the caller invokes it before access any function available 52 * in this file. For this reason, public functions in this file must invoke 53 * dc_assert_fp_enabled(); 54 */ 55 56 struct _vcs_dpi_ip_params_st dcn3_1_ip = { 57 .gpuvm_enable = 1, 58 .gpuvm_max_page_table_levels = 1, 59 .hostvm_enable = 1, 60 .hostvm_max_page_table_levels = 2, 61 .rob_buffer_size_kbytes = 64, 62 .det_buffer_size_kbytes = DCN3_1_DEFAULT_DET_SIZE, 63 .config_return_buffer_size_in_kbytes = 1792, 64 .compressed_buffer_segment_size_in_kbytes = 64, 65 .meta_fifo_size_in_kentries = 32, 66 .zero_size_buffer_entries = 512, 67 .compbuf_reserved_space_64b = 256, 68 .compbuf_reserved_space_zs = 64, 69 .dpp_output_buffer_pixels = 2560, 70 .opp_output_buffer_lines = 1, 71 .pixel_chunk_size_kbytes = 8, 72 .meta_chunk_size_kbytes = 2, 73 .min_meta_chunk_size_bytes = 256, 74 .writeback_chunk_size_kbytes = 8, 75 .ptoi_supported = false, 76 .num_dsc = 3, 77 .maximum_dsc_bits_per_component = 10, 78 .dsc422_native_support = false, 79 .is_line_buffer_bpp_fixed = true, 80 .line_buffer_fixed_bpp = 48, 81 .line_buffer_size_bits = 789504, 82 .max_line_buffer_lines = 12, 83 .writeback_interface_buffer_size_kbytes = 90, 84 .max_num_dpp = 4, 85 .max_num_otg = 4, 86 .max_num_hdmi_frl_outputs = 1, 87 .max_num_wb = 1, 88 .max_dchub_pscl_bw_pix_per_clk = 4, 89 .max_pscl_lb_bw_pix_per_clk = 2, 90 .max_lb_vscl_bw_pix_per_clk = 4, 91 .max_vscl_hscl_bw_pix_per_clk = 4, 92 .max_hscl_ratio = 6, 93 .max_vscl_ratio = 6, 94 .max_hscl_taps = 8, 95 .max_vscl_taps = 8, 96 .dpte_buffer_size_in_pte_reqs_luma = 64, 97 .dpte_buffer_size_in_pte_reqs_chroma = 34, 98 .dispclk_ramp_margin_percent = 1, 99 .max_inter_dcn_tile_repeaters = 8, 100 .cursor_buffer_size = 16, 101 .cursor_chunk_size = 2, 102 .writeback_line_buffer_buffer_size = 0, 103 .writeback_min_hscl_ratio = 1, 104 .writeback_min_vscl_ratio = 1, 105 .writeback_max_hscl_ratio = 1, 106 .writeback_max_vscl_ratio = 1, 107 .writeback_max_hscl_taps = 1, 108 .writeback_max_vscl_taps = 1, 109 .dppclk_delay_subtotal = 46, 110 .dppclk_delay_scl = 50, 111 .dppclk_delay_scl_lb_only = 16, 112 .dppclk_delay_cnvc_formatter = 27, 113 .dppclk_delay_cnvc_cursor = 6, 114 .dispclk_delay_subtotal = 119, 115 .dynamic_metadata_vm_enabled = false, 116 .odm_combine_4to1_supported = false, 117 .dcc_supported = true, 118 }; 119 120 static struct _vcs_dpi_soc_bounding_box_st dcn3_1_soc = { 121 /*TODO: correct dispclk/dppclk voltage level determination*/ 122 .clock_limits = { 123 { 124 .state = 0, 125 .dispclk_mhz = 1200.0, 126 .dppclk_mhz = 1200.0, 127 .phyclk_mhz = 600.0, 128 .phyclk_d18_mhz = 667.0, 129 .dscclk_mhz = 186.0, 130 .dtbclk_mhz = 625.0, 131 }, 132 { 133 .state = 1, 134 .dispclk_mhz = 1200.0, 135 .dppclk_mhz = 1200.0, 136 .phyclk_mhz = 810.0, 137 .phyclk_d18_mhz = 667.0, 138 .dscclk_mhz = 209.0, 139 .dtbclk_mhz = 625.0, 140 }, 141 { 142 .state = 2, 143 .dispclk_mhz = 1200.0, 144 .dppclk_mhz = 1200.0, 145 .phyclk_mhz = 810.0, 146 .phyclk_d18_mhz = 667.0, 147 .dscclk_mhz = 209.0, 148 .dtbclk_mhz = 625.0, 149 }, 150 { 151 .state = 3, 152 .dispclk_mhz = 1200.0, 153 .dppclk_mhz = 1200.0, 154 .phyclk_mhz = 810.0, 155 .phyclk_d18_mhz = 667.0, 156 .dscclk_mhz = 371.0, 157 .dtbclk_mhz = 625.0, 158 }, 159 { 160 .state = 4, 161 .dispclk_mhz = 1200.0, 162 .dppclk_mhz = 1200.0, 163 .phyclk_mhz = 810.0, 164 .phyclk_d18_mhz = 667.0, 165 .dscclk_mhz = 417.0, 166 .dtbclk_mhz = 625.0, 167 }, 168 }, 169 .num_states = 5, 170 .sr_exit_time_us = 9.0, 171 .sr_enter_plus_exit_time_us = 11.0, 172 .sr_exit_z8_time_us = 442.0, 173 .sr_enter_plus_exit_z8_time_us = 560.0, 174 .writeback_latency_us = 12.0, 175 .dram_channel_width_bytes = 4, 176 .round_trip_ping_latency_dcfclk_cycles = 106, 177 .urgent_latency_pixel_data_only_us = 4.0, 178 .urgent_latency_pixel_mixed_with_vm_data_us = 4.0, 179 .urgent_latency_vm_data_only_us = 4.0, 180 .urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096, 181 .urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096, 182 .urgent_out_of_order_return_per_channel_vm_only_bytes = 4096, 183 .pct_ideal_sdp_bw_after_urgent = 80.0, 184 .pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0, 185 .pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0, 186 .pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0, 187 .max_avg_sdp_bw_use_normal_percent = 60.0, 188 .max_avg_dram_bw_use_normal_percent = 60.0, 189 .fabric_datapath_to_dcn_data_return_bytes = 32, 190 .return_bus_width_bytes = 64, 191 .downspread_percent = 0.38, 192 .dcn_downspread_percent = 0.5, 193 .gpuvm_min_page_size_bytes = 4096, 194 .hostvm_min_page_size_bytes = 4096, 195 .do_urgent_latency_adjustment = false, 196 .urgent_latency_adjustment_fabric_clock_component_us = 0, 197 .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, 198 }; 199 200 struct _vcs_dpi_ip_params_st dcn3_15_ip = { 201 .gpuvm_enable = 1, 202 .gpuvm_max_page_table_levels = 1, 203 .hostvm_enable = 1, 204 .hostvm_max_page_table_levels = 2, 205 .rob_buffer_size_kbytes = 64, 206 .det_buffer_size_kbytes = DCN3_15_DEFAULT_DET_SIZE, 207 .min_comp_buffer_size_kbytes = 64, 208 .config_return_buffer_size_in_kbytes = 1024, 209 .compressed_buffer_segment_size_in_kbytes = 64, 210 .meta_fifo_size_in_kentries = 32, 211 .zero_size_buffer_entries = 512, 212 .compbuf_reserved_space_64b = 256, 213 .compbuf_reserved_space_zs = 64, 214 .dpp_output_buffer_pixels = 2560, 215 .opp_output_buffer_lines = 1, 216 .pixel_chunk_size_kbytes = 8, 217 .meta_chunk_size_kbytes = 2, 218 .min_meta_chunk_size_bytes = 256, 219 .writeback_chunk_size_kbytes = 8, 220 .ptoi_supported = false, 221 .num_dsc = 3, 222 .maximum_dsc_bits_per_component = 10, 223 .dsc422_native_support = false, 224 .is_line_buffer_bpp_fixed = true, 225 .line_buffer_fixed_bpp = 48, 226 .line_buffer_size_bits = 789504, 227 .max_line_buffer_lines = 12, 228 .writeback_interface_buffer_size_kbytes = 90, 229 .max_num_dpp = 4, 230 .max_num_otg = 4, 231 .max_num_hdmi_frl_outputs = 1, 232 .max_num_wb = 1, 233 .max_dchub_pscl_bw_pix_per_clk = 4, 234 .max_pscl_lb_bw_pix_per_clk = 2, 235 .max_lb_vscl_bw_pix_per_clk = 4, 236 .max_vscl_hscl_bw_pix_per_clk = 4, 237 .max_hscl_ratio = 6, 238 .max_vscl_ratio = 6, 239 .max_hscl_taps = 8, 240 .max_vscl_taps = 8, 241 .dpte_buffer_size_in_pte_reqs_luma = 64, 242 .dpte_buffer_size_in_pte_reqs_chroma = 34, 243 .dispclk_ramp_margin_percent = 1, 244 .max_inter_dcn_tile_repeaters = 9, 245 .cursor_buffer_size = 16, 246 .cursor_chunk_size = 2, 247 .writeback_line_buffer_buffer_size = 0, 248 .writeback_min_hscl_ratio = 1, 249 .writeback_min_vscl_ratio = 1, 250 .writeback_max_hscl_ratio = 1, 251 .writeback_max_vscl_ratio = 1, 252 .writeback_max_hscl_taps = 1, 253 .writeback_max_vscl_taps = 1, 254 .dppclk_delay_subtotal = 46, 255 .dppclk_delay_scl = 50, 256 .dppclk_delay_scl_lb_only = 16, 257 .dppclk_delay_cnvc_formatter = 27, 258 .dppclk_delay_cnvc_cursor = 6, 259 .dispclk_delay_subtotal = 119, 260 .dynamic_metadata_vm_enabled = false, 261 .odm_combine_4to1_supported = false, 262 .dcc_supported = true, 263 }; 264 265 static struct _vcs_dpi_soc_bounding_box_st dcn3_15_soc = { 266 .sr_exit_time_us = 9.0, 267 .sr_enter_plus_exit_time_us = 11.0, 268 .sr_exit_z8_time_us = 50.0, 269 .sr_enter_plus_exit_z8_time_us = 50.0, 270 .writeback_latency_us = 12.0, 271 .dram_channel_width_bytes = 4, 272 .round_trip_ping_latency_dcfclk_cycles = 106, 273 .urgent_latency_pixel_data_only_us = 4.0, 274 .urgent_latency_pixel_mixed_with_vm_data_us = 4.0, 275 .urgent_latency_vm_data_only_us = 4.0, 276 .urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096, 277 .urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096, 278 .urgent_out_of_order_return_per_channel_vm_only_bytes = 4096, 279 .pct_ideal_sdp_bw_after_urgent = 80.0, 280 .pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0, 281 .pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0, 282 .pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0, 283 .max_avg_sdp_bw_use_normal_percent = 60.0, 284 .max_avg_dram_bw_use_normal_percent = 60.0, 285 .fabric_datapath_to_dcn_data_return_bytes = 32, 286 .return_bus_width_bytes = 64, 287 .downspread_percent = 0.38, 288 .dcn_downspread_percent = 0.38, 289 .gpuvm_min_page_size_bytes = 4096, 290 .hostvm_min_page_size_bytes = 4096, 291 .do_urgent_latency_adjustment = false, 292 .urgent_latency_adjustment_fabric_clock_component_us = 0, 293 .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, 294 .dispclk_dppclk_vco_speed_mhz = 2400.0, 295 .num_chans = 4, 296 .dummy_pstate_latency_us = 10.0 297 }; 298 299 struct _vcs_dpi_ip_params_st dcn3_16_ip = { 300 .gpuvm_enable = 1, 301 .gpuvm_max_page_table_levels = 1, 302 .hostvm_enable = 1, 303 .hostvm_max_page_table_levels = 2, 304 .rob_buffer_size_kbytes = 64, 305 .det_buffer_size_kbytes = DCN3_16_DEFAULT_DET_SIZE, 306 .min_comp_buffer_size_kbytes = 64, 307 .config_return_buffer_size_in_kbytes = 1024, 308 .compressed_buffer_segment_size_in_kbytes = 64, 309 .meta_fifo_size_in_kentries = 32, 310 .zero_size_buffer_entries = 512, 311 .compbuf_reserved_space_64b = 256, 312 .compbuf_reserved_space_zs = 64, 313 .dpp_output_buffer_pixels = 2560, 314 .opp_output_buffer_lines = 1, 315 .pixel_chunk_size_kbytes = 8, 316 .meta_chunk_size_kbytes = 2, 317 .min_meta_chunk_size_bytes = 256, 318 .writeback_chunk_size_kbytes = 8, 319 .ptoi_supported = false, 320 .num_dsc = 3, 321 .maximum_dsc_bits_per_component = 10, 322 .dsc422_native_support = false, 323 .is_line_buffer_bpp_fixed = true, 324 .line_buffer_fixed_bpp = 48, 325 .line_buffer_size_bits = 789504, 326 .max_line_buffer_lines = 12, 327 .writeback_interface_buffer_size_kbytes = 90, 328 .max_num_dpp = 4, 329 .max_num_otg = 4, 330 .max_num_hdmi_frl_outputs = 1, 331 .max_num_wb = 1, 332 .max_dchub_pscl_bw_pix_per_clk = 4, 333 .max_pscl_lb_bw_pix_per_clk = 2, 334 .max_lb_vscl_bw_pix_per_clk = 4, 335 .max_vscl_hscl_bw_pix_per_clk = 4, 336 .max_hscl_ratio = 6, 337 .max_vscl_ratio = 6, 338 .max_hscl_taps = 8, 339 .max_vscl_taps = 8, 340 .dpte_buffer_size_in_pte_reqs_luma = 64, 341 .dpte_buffer_size_in_pte_reqs_chroma = 34, 342 .dispclk_ramp_margin_percent = 1, 343 .max_inter_dcn_tile_repeaters = 8, 344 .cursor_buffer_size = 16, 345 .cursor_chunk_size = 2, 346 .writeback_line_buffer_buffer_size = 0, 347 .writeback_min_hscl_ratio = 1, 348 .writeback_min_vscl_ratio = 1, 349 .writeback_max_hscl_ratio = 1, 350 .writeback_max_vscl_ratio = 1, 351 .writeback_max_hscl_taps = 1, 352 .writeback_max_vscl_taps = 1, 353 .dppclk_delay_subtotal = 46, 354 .dppclk_delay_scl = 50, 355 .dppclk_delay_scl_lb_only = 16, 356 .dppclk_delay_cnvc_formatter = 27, 357 .dppclk_delay_cnvc_cursor = 6, 358 .dispclk_delay_subtotal = 119, 359 .dynamic_metadata_vm_enabled = false, 360 .odm_combine_4to1_supported = false, 361 .dcc_supported = true, 362 }; 363 364 static struct _vcs_dpi_soc_bounding_box_st dcn3_16_soc = { 365 /*TODO: correct dispclk/dppclk voltage level determination*/ 366 .clock_limits = { 367 { 368 .state = 0, 369 .dispclk_mhz = 556.0, 370 .dppclk_mhz = 556.0, 371 .phyclk_mhz = 600.0, 372 .phyclk_d18_mhz = 445.0, 373 .dscclk_mhz = 186.0, 374 .dtbclk_mhz = 625.0, 375 }, 376 { 377 .state = 1, 378 .dispclk_mhz = 625.0, 379 .dppclk_mhz = 625.0, 380 .phyclk_mhz = 810.0, 381 .phyclk_d18_mhz = 667.0, 382 .dscclk_mhz = 209.0, 383 .dtbclk_mhz = 625.0, 384 }, 385 { 386 .state = 2, 387 .dispclk_mhz = 625.0, 388 .dppclk_mhz = 625.0, 389 .phyclk_mhz = 810.0, 390 .phyclk_d18_mhz = 667.0, 391 .dscclk_mhz = 209.0, 392 .dtbclk_mhz = 625.0, 393 }, 394 { 395 .state = 3, 396 .dispclk_mhz = 1112.0, 397 .dppclk_mhz = 1112.0, 398 .phyclk_mhz = 810.0, 399 .phyclk_d18_mhz = 667.0, 400 .dscclk_mhz = 371.0, 401 .dtbclk_mhz = 625.0, 402 }, 403 { 404 .state = 4, 405 .dispclk_mhz = 1250.0, 406 .dppclk_mhz = 1250.0, 407 .phyclk_mhz = 810.0, 408 .phyclk_d18_mhz = 667.0, 409 .dscclk_mhz = 417.0, 410 .dtbclk_mhz = 625.0, 411 }, 412 }, 413 .num_states = 5, 414 .sr_exit_time_us = 9.0, 415 .sr_enter_plus_exit_time_us = 11.0, 416 .sr_exit_z8_time_us = 442.0, 417 .sr_enter_plus_exit_z8_time_us = 560.0, 418 .writeback_latency_us = 12.0, 419 .dram_channel_width_bytes = 4, 420 .round_trip_ping_latency_dcfclk_cycles = 106, 421 .urgent_latency_pixel_data_only_us = 4.0, 422 .urgent_latency_pixel_mixed_with_vm_data_us = 4.0, 423 .urgent_latency_vm_data_only_us = 4.0, 424 .urgent_out_of_order_return_per_channel_pixel_only_bytes = 4096, 425 .urgent_out_of_order_return_per_channel_pixel_and_vm_bytes = 4096, 426 .urgent_out_of_order_return_per_channel_vm_only_bytes = 4096, 427 .pct_ideal_sdp_bw_after_urgent = 80.0, 428 .pct_ideal_dram_sdp_bw_after_urgent_pixel_only = 65.0, 429 .pct_ideal_dram_sdp_bw_after_urgent_pixel_and_vm = 60.0, 430 .pct_ideal_dram_sdp_bw_after_urgent_vm_only = 30.0, 431 .max_avg_sdp_bw_use_normal_percent = 60.0, 432 .max_avg_dram_bw_use_normal_percent = 60.0, 433 .fabric_datapath_to_dcn_data_return_bytes = 32, 434 .return_bus_width_bytes = 64, 435 .downspread_percent = 0.38, 436 .dcn_downspread_percent = 0.5, 437 .gpuvm_min_page_size_bytes = 4096, 438 .hostvm_min_page_size_bytes = 4096, 439 .do_urgent_latency_adjustment = false, 440 .urgent_latency_adjustment_fabric_clock_component_us = 0, 441 .urgent_latency_adjustment_fabric_clock_reference_mhz = 0, 442 .dispclk_dppclk_vco_speed_mhz = 2500.0, 443 }; 444 445 void dcn31_zero_pipe_dcc_fraction(display_e2e_pipe_params_st *pipes, 446 int pipe_cnt) 447 { 448 dc_assert_fp_enabled(); 449 450 pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0; 451 pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0; 452 } 453 454 void dcn31_update_soc_for_wm_a(struct dc *dc, struct dc_state *context) 455 { 456 dc_assert_fp_enabled(); 457 458 if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) { 459 context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us; 460 context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us; 461 context->bw_ctx.dml.soc.sr_exit_time_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us; 462 } 463 } 464 465 void dcn315_update_soc_for_wm_a(struct dc *dc, struct dc_state *context) 466 { 467 dc_assert_fp_enabled(); 468 469 if (dc->clk_mgr->bw_params->wm_table.entries[WM_A].valid) { 470 /* For 315 pstate change is only supported if possible in vactive */ 471 if (context->bw_ctx.dml.vba.DRAMClockChangeSupport[context->bw_ctx.dml.vba.VoltageLevel][context->bw_ctx.dml.vba.maxMpcComb] != dm_dram_clock_change_vactive) 472 context->bw_ctx.dml.soc.dram_clock_change_latency_us = context->bw_ctx.dml.soc.dummy_pstate_latency_us; 473 else 474 context->bw_ctx.dml.soc.dram_clock_change_latency_us = dc->clk_mgr->bw_params->wm_table.entries[WM_A].pstate_latency_us; 475 context->bw_ctx.dml.soc.sr_enter_plus_exit_time_us = 476 dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_enter_plus_exit_time_us; 477 context->bw_ctx.dml.soc.sr_exit_time_us = 478 dc->clk_mgr->bw_params->wm_table.entries[WM_A].sr_exit_time_us; 479 } 480 } 481 482 void dcn31_calculate_wm_and_dlg_fp( 483 struct dc *dc, struct dc_state *context, 484 display_e2e_pipe_params_st *pipes, 485 int pipe_cnt, 486 int vlevel) 487 { 488 int total_det = 0, active_hubp_count = 0; 489 unsigned int i, pipe_idx; 490 double dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb]; 491 uint32_t cstate_enter_plus_exit_z8_ns; 492 uint32_t minimum_z8_residency_time_ns = 493 (uint32_t)dc->debug.minimum_z8_residency_time * 1000U; 494 495 dc_assert_fp_enabled(); 496 497 if (context->bw_ctx.dml.soc.min_dcfclk > dcfclk) 498 dcfclk = context->bw_ctx.dml.soc.min_dcfclk; 499 500 /* We don't recalculate clocks for 0 pipe configs, which can block 501 * S0i3 as high clocks will block low power states 502 * Override any clocks that can block S0i3 to min here 503 */ 504 if (pipe_cnt == 0) { 505 context->bw_ctx.bw.dcn.clk.dcfclk_khz = (int)dcfclk; // always should be vlevel 0 506 return; 507 } 508 509 pipes[0].clks_cfg.voltage = vlevel; 510 pipes[0].clks_cfg.dcfclk_mhz = dcfclk; 511 pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz; 512 513 cstate_enter_plus_exit_z8_ns = 514 (uint32_t)(get_wm_z8_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 515 516 if (get_stutter_period(&context->bw_ctx.dml, pipes, pipe_cnt) < dc->debug.minimum_z8_residency_time && 517 cstate_enter_plus_exit_z8_ns < minimum_z8_residency_time_ns) 518 cstate_enter_plus_exit_z8_ns = minimum_z8_residency_time_ns; 519 520 /* Set A: 521 * All clocks min required 522 * 523 * Set A calculated last so that following calculations are based on Set A 524 */ 525 dc->res_pool->funcs->update_soc_for_wm_a(dc, context); 526 context->bw_ctx.bw.dcn.watermarks.a.urgent_ns = (uint32_t)(get_wm_urgent(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 527 context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_ns = (uint32_t)(get_wm_stutter_enter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 528 context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_ns = (uint32_t)(get_wm_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 529 context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns = (uint32_t)(get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 530 context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_enter_plus_exit_z8_ns = cstate_enter_plus_exit_z8_ns; 531 context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.cstate_exit_z8_ns = (uint32_t)(get_wm_z8_stutter_exit(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 532 context->bw_ctx.bw.dcn.watermarks.a.pte_meta_urgent_ns = (uint32_t)(get_wm_memory_trip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 533 context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_nom = (uint32_t)(get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 534 context->bw_ctx.bw.dcn.watermarks.a.frac_urg_bw_flip = (uint32_t)(get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 535 context->bw_ctx.bw.dcn.watermarks.a.urgent_latency_ns = (uint32_t)(get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000); 536 context->bw_ctx.bw.dcn.watermarks.b = context->bw_ctx.bw.dcn.watermarks.a; 537 context->bw_ctx.bw.dcn.watermarks.c = context->bw_ctx.bw.dcn.watermarks.a; 538 context->bw_ctx.bw.dcn.watermarks.d = context->bw_ctx.bw.dcn.watermarks.a; 539 540 for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { 541 if (!context->res_ctx.pipe_ctx[i].stream) 542 continue; 543 544 if (context->res_ctx.pipe_ctx[i].plane_state) 545 active_hubp_count++; 546 547 pipes[pipe_idx].clks_cfg.dispclk_mhz = get_dispclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt); 548 pipes[pipe_idx].clks_cfg.dppclk_mhz = get_dppclk_calculated(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx); 549 550 if (dc->config.forced_clocks || dc->debug.max_disp_clk) { 551 pipes[pipe_idx].clks_cfg.dispclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dispclk_mhz; 552 pipes[pipe_idx].clks_cfg.dppclk_mhz = context->bw_ctx.dml.soc.clock_limits[0].dppclk_mhz; 553 } 554 if (dc->debug.min_disp_clk_khz > pipes[pipe_idx].clks_cfg.dispclk_mhz * 1000) 555 pipes[pipe_idx].clks_cfg.dispclk_mhz = dc->debug.min_disp_clk_khz / 1000.0; 556 if (dc->debug.min_dpp_clk_khz > pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000) 557 pipes[pipe_idx].clks_cfg.dppclk_mhz = dc->debug.min_dpp_clk_khz / 1000.0; 558 559 pipe_idx++; 560 } 561 562 dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel); 563 /* For 31x apu pstate change is only supported if possible in vactive*/ 564 context->bw_ctx.bw.dcn.clk.p_state_change_support = 565 context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] == dm_dram_clock_change_vactive; 566 /* If DCN isn't making memory requests we can allow pstate change and lower clocks */ 567 if (!active_hubp_count) { 568 context->bw_ctx.bw.dcn.clk.socclk_khz = 0; 569 context->bw_ctx.bw.dcn.clk.dppclk_khz = 0; 570 context->bw_ctx.bw.dcn.clk.dcfclk_khz = 0; 571 context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = 0; 572 context->bw_ctx.bw.dcn.clk.dramclk_khz = 0; 573 context->bw_ctx.bw.dcn.clk.fclk_khz = 0; 574 context->bw_ctx.bw.dcn.clk.p_state_change_support = true; 575 for (i = 0; i < dc->res_pool->pipe_count; i++) 576 if (context->res_ctx.pipe_ctx[i].stream) 577 context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz = 0; 578 } 579 for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { 580 if (!context->res_ctx.pipe_ctx[i].stream) 581 continue; 582 583 context->res_ctx.pipe_ctx[i].det_buffer_size_kb = 584 (int)get_det_buffer_size_kbytes(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx); 585 if (context->res_ctx.pipe_ctx[i].det_buffer_size_kb > 384) 586 context->res_ctx.pipe_ctx[i].det_buffer_size_kb /= 2; 587 total_det += context->res_ctx.pipe_ctx[i].det_buffer_size_kb; 588 pipe_idx++; 589 } 590 context->bw_ctx.bw.dcn.compbuf_size_kb = context->bw_ctx.dml.ip.config_return_buffer_size_in_kbytes - total_det; 591 } 592 593 void dcn31_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_params) 594 { 595 struct _vcs_dpi_voltage_scaling_st *s = dc->scratch.update_bw_bounding_box.clock_limits; 596 struct clk_limit_table *clk_table = &bw_params->clk_table; 597 unsigned int i, closest_clk_lvl; 598 unsigned int max_dispclk_mhz = 0, max_dppclk_mhz = 0; 599 int j; 600 601 dc_assert_fp_enabled(); 602 603 memcpy(s, dcn3_1_soc.clock_limits, sizeof(dcn3_1_soc.clock_limits)); 604 605 // Default clock levels are used for diags, which may lead to overclocking. 606 dcn3_1_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator; 607 dcn3_1_ip.max_num_dpp = dc->res_pool->pipe_count; 608 dcn3_1_soc.num_chans = bw_params->num_channels; 609 610 ASSERT(clk_table->num_entries); 611 612 /* Prepass to find max clocks independent of voltage level. */ 613 for (i = 0; i < clk_table->num_entries; ++i) { 614 if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz) 615 max_dispclk_mhz = clk_table->entries[i].dispclk_mhz; 616 if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz) 617 max_dppclk_mhz = clk_table->entries[i].dppclk_mhz; 618 } 619 620 for (i = 0; i < clk_table->num_entries; i++) { 621 /* loop backwards*/ 622 for (closest_clk_lvl = 0, j = dcn3_1_soc.num_states - 1; j >= 0; j--) { 623 if ((unsigned int) dcn3_1_soc.clock_limits[j].dcfclk_mhz <= clk_table->entries[i].dcfclk_mhz) { 624 closest_clk_lvl = j; 625 break; 626 } 627 } 628 629 s[i].state = i; 630 631 /* Clocks dependent on voltage level. */ 632 s[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz; 633 s[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz; 634 s[i].socclk_mhz = clk_table->entries[i].socclk_mhz; 635 s[i].dram_speed_mts = clk_table->entries[i].memclk_mhz * 636 2 * clk_table->entries[i].wck_ratio; 637 638 /* Clocks independent of voltage level. */ 639 s[i].dispclk_mhz = max_dispclk_mhz ? max_dispclk_mhz : 640 dcn3_1_soc.clock_limits[closest_clk_lvl].dispclk_mhz; 641 642 s[i].dppclk_mhz = max_dppclk_mhz ? max_dppclk_mhz : 643 dcn3_1_soc.clock_limits[closest_clk_lvl].dppclk_mhz; 644 645 s[i].dram_bw_per_chan_gbps = 646 dcn3_1_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps; 647 s[i].dscclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].dscclk_mhz; 648 s[i].dtbclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].dtbclk_mhz; 649 s[i].phyclk_d18_mhz = 650 dcn3_1_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz; 651 s[i].phyclk_mhz = dcn3_1_soc.clock_limits[closest_clk_lvl].phyclk_mhz; 652 } 653 654 if (clk_table->num_entries) 655 dcn3_1_soc.num_states = clk_table->num_entries; 656 657 memcpy(dcn3_1_soc.clock_limits, s, sizeof(dcn3_1_soc.clock_limits)); 658 659 dcn3_1_soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0; 660 dc->dml.soc.dispclk_dppclk_vco_speed_mhz = dc->clk_mgr->dentist_vco_freq_khz / 1000.0; 661 662 if ((int)(dcn3_1_soc.dram_clock_change_latency_us * 1000) 663 != dc->debug.dram_clock_change_latency_ns 664 && dc->debug.dram_clock_change_latency_ns) { 665 dcn3_1_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000; 666 } 667 668 dml_init_instance(&dc->dml, &dcn3_1_soc, &dcn3_1_ip, DML_PROJECT_DCN31); 669 } 670 671 void dcn315_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_params) 672 { 673 struct clk_limit_table *clk_table = &bw_params->clk_table; 674 unsigned int i, max_dispclk_mhz = 0, max_dppclk_mhz = 0; 675 676 dc_assert_fp_enabled(); 677 678 dcn3_15_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator; 679 dcn3_15_ip.max_num_dpp = dc->res_pool->pipe_count; 680 681 if (bw_params->num_channels > 0) 682 dcn3_15_soc.num_chans = bw_params->num_channels; 683 if (bw_params->dram_channel_width_bytes > 0) 684 dcn3_15_soc.dram_channel_width_bytes = bw_params->dram_channel_width_bytes; 685 686 ASSERT(clk_table->num_entries); 687 688 /* Setup soc to always use max dispclk/dppclk to avoid odm-to-lower-voltage */ 689 for (i = 0; i < clk_table->num_entries; ++i) { 690 if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz) 691 max_dispclk_mhz = clk_table->entries[i].dispclk_mhz; 692 if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz) 693 max_dppclk_mhz = clk_table->entries[i].dppclk_mhz; 694 } 695 696 for (i = 0; i < clk_table->num_entries; i++) { 697 dcn3_15_soc.clock_limits[i].state = i; 698 699 /* Clocks dependent on voltage level. */ 700 dcn3_15_soc.clock_limits[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz; 701 dcn3_15_soc.clock_limits[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz; 702 dcn3_15_soc.clock_limits[i].socclk_mhz = clk_table->entries[i].socclk_mhz; 703 dcn3_15_soc.clock_limits[i].dram_speed_mts = clk_table->entries[i].memclk_mhz * 2 * clk_table->entries[i].wck_ratio; 704 705 /* These aren't actually read from smu, but rather set in clk_mgr defaults */ 706 dcn3_15_soc.clock_limits[i].dtbclk_mhz = clk_table->entries[i].dtbclk_mhz; 707 dcn3_15_soc.clock_limits[i].phyclk_d18_mhz = clk_table->entries[i].phyclk_d18_mhz; 708 dcn3_15_soc.clock_limits[i].phyclk_mhz = clk_table->entries[i].phyclk_mhz; 709 710 /* Clocks independent of voltage level. */ 711 dcn3_15_soc.clock_limits[i].dispclk_mhz = max_dispclk_mhz; 712 dcn3_15_soc.clock_limits[i].dppclk_mhz = max_dppclk_mhz; 713 dcn3_15_soc.clock_limits[i].dscclk_mhz = max_dispclk_mhz / 3.0; 714 } 715 dcn3_15_soc.num_states = clk_table->num_entries; 716 717 718 /* Set vco to max_dispclk * 2 to make sure the highest dispclk is always available for dml calcs, 719 * no impact outside of dml validation 720 */ 721 dcn3_15_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2; 722 723 if ((int)(dcn3_15_soc.dram_clock_change_latency_us * 1000) 724 != dc->debug.dram_clock_change_latency_ns 725 && dc->debug.dram_clock_change_latency_ns) { 726 dcn3_15_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000; 727 } 728 729 dml_init_instance(&dc->dml, &dcn3_15_soc, &dcn3_15_ip, DML_PROJECT_DCN315); 730 } 731 732 void dcn316_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_params) 733 { 734 struct _vcs_dpi_voltage_scaling_st *s = dc->scratch.update_bw_bounding_box.clock_limits; 735 struct clk_limit_table *clk_table = &bw_params->clk_table; 736 unsigned int i, closest_clk_lvl; 737 unsigned int max_dispclk_mhz = 0, max_dppclk_mhz = 0; 738 int j; 739 740 dc_assert_fp_enabled(); 741 742 memcpy(s, dcn3_16_soc.clock_limits, sizeof(dcn3_16_soc.clock_limits)); 743 744 // Default clock levels are used for diags, which may lead to overclocking. 745 dcn3_16_ip.max_num_otg = dc->res_pool->res_cap->num_timing_generator; 746 dcn3_16_ip.max_num_dpp = dc->res_pool->pipe_count; 747 dcn3_16_soc.num_chans = bw_params->num_channels; 748 749 ASSERT(clk_table->num_entries); 750 751 /* Prepass to find max clocks independent of voltage level. */ 752 for (i = 0; i < clk_table->num_entries; ++i) { 753 if (clk_table->entries[i].dispclk_mhz > max_dispclk_mhz) 754 max_dispclk_mhz = clk_table->entries[i].dispclk_mhz; 755 if (clk_table->entries[i].dppclk_mhz > max_dppclk_mhz) 756 max_dppclk_mhz = clk_table->entries[i].dppclk_mhz; 757 } 758 759 for (i = 0; i < clk_table->num_entries; i++) { 760 /* loop backwards*/ 761 for (closest_clk_lvl = 0, j = dcn3_16_soc.num_states - 1; j >= 0; j--) { 762 if ((unsigned int) dcn3_16_soc.clock_limits[j].dcfclk_mhz <= 763 clk_table->entries[i].dcfclk_mhz) { 764 closest_clk_lvl = j; 765 break; 766 } 767 } 768 769 s[i].state = i; 770 771 /* Clocks dependent on voltage level. */ 772 s[i].dcfclk_mhz = clk_table->entries[i].dcfclk_mhz; 773 s[i].fabricclk_mhz = clk_table->entries[i].fclk_mhz; 774 s[i].socclk_mhz = clk_table->entries[i].socclk_mhz; 775 s[i].dram_speed_mts = clk_table->entries[i].memclk_mhz * 776 2 * clk_table->entries[i].wck_ratio; 777 778 /* Clocks independent of voltage level. */ 779 s[i].dispclk_mhz = max_dispclk_mhz ? max_dispclk_mhz : 780 dcn3_16_soc.clock_limits[closest_clk_lvl].dispclk_mhz; 781 782 s[i].dppclk_mhz = max_dppclk_mhz ? max_dppclk_mhz : 783 dcn3_16_soc.clock_limits[closest_clk_lvl].dppclk_mhz; 784 785 s[i].dram_bw_per_chan_gbps = 786 dcn3_16_soc.clock_limits[closest_clk_lvl].dram_bw_per_chan_gbps; 787 s[i].dscclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].dscclk_mhz; 788 s[i].dtbclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].dtbclk_mhz; 789 s[i].phyclk_d18_mhz = 790 dcn3_16_soc.clock_limits[closest_clk_lvl].phyclk_d18_mhz; 791 s[i].phyclk_mhz = dcn3_16_soc.clock_limits[closest_clk_lvl].phyclk_mhz; 792 } 793 794 if (clk_table->num_entries) 795 dcn3_16_soc.num_states = clk_table->num_entries; 796 797 memcpy(dcn3_16_soc.clock_limits, s, sizeof(dcn3_16_soc.clock_limits)); 798 799 if (max_dispclk_mhz) { 800 dcn3_16_soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2; 801 dc->dml.soc.dispclk_dppclk_vco_speed_mhz = max_dispclk_mhz * 2; 802 } 803 if ((int)(dcn3_16_soc.dram_clock_change_latency_us * 1000) 804 != dc->debug.dram_clock_change_latency_ns 805 && dc->debug.dram_clock_change_latency_ns) { 806 dcn3_16_soc.dram_clock_change_latency_us = dc->debug.dram_clock_change_latency_ns / 1000; 807 } 808 809 dml_init_instance(&dc->dml, &dcn3_16_soc, &dcn3_16_ip, DML_PROJECT_DCN31); 810 } 811 812 int dcn_get_max_non_odm_pix_rate_100hz(struct _vcs_dpi_soc_bounding_box_st *soc) 813 { 814 dc_assert_fp_enabled(); 815 816 return (int)(soc->clock_limits[0].dispclk_mhz * 10000.0 / (1.0 + soc->dcn_downspread_percent / 100.0)); 817 } 818 819 int dcn_get_approx_det_segs_required_for_pstate( 820 struct _vcs_dpi_soc_bounding_box_st *soc, 821 int pix_clk_100hz, int bpp, int seg_size_kb) 822 { 823 dc_assert_fp_enabled(); 824 825 /* Roughly calculate required crb to hide latency. In practice there is slightly 826 * more buffer available for latency hiding 827 */ 828 return (int)(soc->dram_clock_change_latency_us * pix_clk_100hz * bpp 829 / 10240000 + seg_size_kb - 1) / seg_size_kb; 830 } 831