1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Synopsys DesignWare 8250 driver.
4 *
5 * Copyright 2011 Picochip, Jamie Iles.
6 * Copyright 2013 Intel Corporation
7 *
8 * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
9 * LCR is written whilst busy. If it is, then a busy detect interrupt is
10 * raised, the LCR needs to be rewritten and the uart status register read.
11 */
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/io.h>
16 #include <linux/mod_devicetable.h>
17 #include <linux/module.h>
18 #include <linux/notifier.h>
19 #include <linux/platform_device.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/property.h>
22 #include <linux/reset.h>
23 #include <linux/slab.h>
24 #include <linux/workqueue.h>
25
26 #include <asm/byteorder.h>
27
28 #include <linux/serial_8250.h>
29 #include <linux/serial_reg.h>
30
31 #include "8250_dwlib.h"
32
33 /* Offsets for the DesignWare specific registers */
34 #define DW_UART_USR 0x1f /* UART Status Register */
35 #define DW_UART_DMASA 0xa8 /* DMA Software Ack */
36
37 #define OCTEON_UART_USR 0x27 /* UART Status Register */
38
39 #define RZN1_UART_TDMACR 0x10c /* DMA Control Register Transmit Mode */
40 #define RZN1_UART_RDMACR 0x110 /* DMA Control Register Receive Mode */
41
42 /* DesignWare specific register fields */
43 #define DW_UART_MCR_SIRE BIT(6)
44
45 /* Renesas specific register fields */
46 #define RZN1_UART_xDMACR_DMA_EN BIT(0)
47 #define RZN1_UART_xDMACR_1_WORD_BURST (0 << 1)
48 #define RZN1_UART_xDMACR_4_WORD_BURST (1 << 1)
49 #define RZN1_UART_xDMACR_8_WORD_BURST (2 << 1)
50 #define RZN1_UART_xDMACR_BLK_SZ(x) ((x) << 3)
51
52 /* Quirks */
53 #define DW_UART_QUIRK_OCTEON BIT(0)
54 #define DW_UART_QUIRK_ARMADA_38X BIT(1)
55 #define DW_UART_QUIRK_SKIP_SET_RATE BIT(2)
56 #define DW_UART_QUIRK_IS_DMA_FC BIT(3)
57 #define DW_UART_QUIRK_APMC0D08 BIT(4)
58 #define DW_UART_QUIRK_CPR_VALUE BIT(5)
59
60 struct dw8250_platform_data {
61 u8 usr_reg;
62 u32 cpr_value;
63 unsigned int quirks;
64 };
65
66 struct dw8250_data {
67 struct dw8250_port_data data;
68 const struct dw8250_platform_data *pdata;
69
70 int msr_mask_on;
71 int msr_mask_off;
72 struct clk *clk;
73 struct clk *pclk;
74 struct notifier_block clk_notifier;
75 struct work_struct clk_work;
76 struct reset_control *rst;
77
78 unsigned int skip_autocfg:1;
79 unsigned int uart_16550_compatible:1;
80 };
81
to_dw8250_data(struct dw8250_port_data * data)82 static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data)
83 {
84 return container_of(data, struct dw8250_data, data);
85 }
86
clk_to_dw8250_data(struct notifier_block * nb)87 static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb)
88 {
89 return container_of(nb, struct dw8250_data, clk_notifier);
90 }
91
work_to_dw8250_data(struct work_struct * work)92 static inline struct dw8250_data *work_to_dw8250_data(struct work_struct *work)
93 {
94 return container_of(work, struct dw8250_data, clk_work);
95 }
96
dw8250_modify_msr(struct uart_port * p,int offset,int value)97 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
98 {
99 struct dw8250_data *d = to_dw8250_data(p->private_data);
100
101 /* Override any modem control signals if needed */
102 if (offset == UART_MSR) {
103 value |= d->msr_mask_on;
104 value &= ~d->msr_mask_off;
105 }
106
107 return value;
108 }
109
dw8250_force_idle(struct uart_port * p)110 static void dw8250_force_idle(struct uart_port *p)
111 {
112 struct uart_8250_port *up = up_to_u8250p(p);
113 unsigned int lsr;
114
115 serial8250_clear_and_reinit_fifos(up);
116
117 /*
118 * With PSLVERR_RESP_EN parameter set to 1, the device generates an
119 * error response when an attempt to read an empty RBR with FIFO
120 * enabled.
121 */
122 if (up->fcr & UART_FCR_ENABLE_FIFO) {
123 lsr = p->serial_in(p, UART_LSR);
124 if (!(lsr & UART_LSR_DR))
125 return;
126 }
127
128 (void)p->serial_in(p, UART_RX);
129 }
130
dw8250_check_lcr(struct uart_port * p,int offset,int value)131 static void dw8250_check_lcr(struct uart_port *p, int offset, int value)
132 {
133 struct dw8250_data *d = to_dw8250_data(p->private_data);
134 void __iomem *addr = p->membase + (offset << p->regshift);
135 int tries = 1000;
136
137 if (offset != UART_LCR || d->uart_16550_compatible)
138 return;
139
140 /* Make sure LCR write wasn't ignored */
141 while (tries--) {
142 unsigned int lcr = p->serial_in(p, offset);
143
144 if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
145 return;
146
147 dw8250_force_idle(p);
148
149 #ifdef CONFIG_64BIT
150 if (p->type == PORT_OCTEON)
151 __raw_writeq(value & 0xff, addr);
152 else
153 #endif
154 if (p->iotype == UPIO_MEM32)
155 writel(value, addr);
156 else if (p->iotype == UPIO_MEM32BE)
157 iowrite32be(value, addr);
158 else
159 writeb(value, addr);
160 }
161 /*
162 * FIXME: this deadlocks if port->lock is already held
163 * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
164 */
165 }
166
167 /* Returns once the transmitter is empty or we run out of retries */
dw8250_tx_wait_empty(struct uart_port * p)168 static void dw8250_tx_wait_empty(struct uart_port *p)
169 {
170 struct uart_8250_port *up = up_to_u8250p(p);
171 unsigned int tries = 20000;
172 unsigned int delay_threshold = tries - 1000;
173 unsigned int lsr;
174
175 while (tries--) {
176 lsr = readb (p->membase + (UART_LSR << p->regshift));
177 up->lsr_saved_flags |= lsr & up->lsr_save_mask;
178
179 if (lsr & UART_LSR_TEMT)
180 break;
181
182 /* The device is first given a chance to empty without delay,
183 * to avoid slowdowns at high bitrates. If after 1000 tries
184 * the buffer has still not emptied, allow more time for low-
185 * speed links. */
186 if (tries < delay_threshold)
187 udelay (1);
188 }
189 }
190
dw8250_serial_out(struct uart_port * p,int offset,int value)191 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
192 {
193 writeb(value, p->membase + (offset << p->regshift));
194 dw8250_check_lcr(p, offset, value);
195 }
196
dw8250_serial_out38x(struct uart_port * p,int offset,int value)197 static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
198 {
199 /* Allow the TX to drain before we reconfigure */
200 if (offset == UART_LCR)
201 dw8250_tx_wait_empty(p);
202
203 dw8250_serial_out(p, offset, value);
204 }
205
dw8250_serial_in(struct uart_port * p,int offset)206 static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
207 {
208 unsigned int value = readb(p->membase + (offset << p->regshift));
209
210 return dw8250_modify_msr(p, offset, value);
211 }
212
213 #ifdef CONFIG_64BIT
dw8250_serial_inq(struct uart_port * p,int offset)214 static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
215 {
216 u8 value = __raw_readq(p->membase + (offset << p->regshift));
217
218 return dw8250_modify_msr(p, offset, value);
219 }
220
dw8250_serial_outq(struct uart_port * p,int offset,int value)221 static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
222 {
223 value &= 0xff;
224 __raw_writeq(value, p->membase + (offset << p->regshift));
225 /* Read back to ensure register write ordering. */
226 __raw_readq(p->membase + (UART_LCR << p->regshift));
227
228 dw8250_check_lcr(p, offset, value);
229 }
230 #endif /* CONFIG_64BIT */
231
dw8250_serial_out32(struct uart_port * p,int offset,int value)232 static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
233 {
234 writel(value, p->membase + (offset << p->regshift));
235 dw8250_check_lcr(p, offset, value);
236 }
237
dw8250_serial_in32(struct uart_port * p,int offset)238 static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
239 {
240 unsigned int value = readl(p->membase + (offset << p->regshift));
241
242 return dw8250_modify_msr(p, offset, value);
243 }
244
dw8250_serial_out32be(struct uart_port * p,int offset,int value)245 static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
246 {
247 iowrite32be(value, p->membase + (offset << p->regshift));
248 dw8250_check_lcr(p, offset, value);
249 }
250
dw8250_serial_in32be(struct uart_port * p,int offset)251 static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
252 {
253 unsigned int value = ioread32be(p->membase + (offset << p->regshift));
254
255 return dw8250_modify_msr(p, offset, value);
256 }
257
258
dw8250_handle_irq(struct uart_port * p)259 static int dw8250_handle_irq(struct uart_port *p)
260 {
261 struct uart_8250_port *up = up_to_u8250p(p);
262 struct dw8250_data *d = to_dw8250_data(p->private_data);
263 unsigned int iir = p->serial_in(p, UART_IIR);
264 bool rx_timeout = (iir & 0x3f) == UART_IIR_RX_TIMEOUT;
265 unsigned int quirks = d->pdata->quirks;
266 unsigned int status;
267 unsigned long flags;
268
269 /*
270 * There are ways to get Designware-based UARTs into a state where
271 * they are asserting UART_IIR_RX_TIMEOUT but there is no actual
272 * data available. If we see such a case then we'll do a bogus
273 * read. If we don't do this then the "RX TIMEOUT" interrupt will
274 * fire forever.
275 *
276 * This problem has only been observed so far when not in DMA mode
277 * so we limit the workaround only to non-DMA mode.
278 */
279 if (!up->dma && rx_timeout) {
280 uart_port_lock_irqsave(p, &flags);
281 status = serial_lsr_in(up);
282
283 if (!(status & (UART_LSR_DR | UART_LSR_BI)))
284 (void) p->serial_in(p, UART_RX);
285
286 uart_port_unlock_irqrestore(p, flags);
287 }
288
289 /* Manually stop the Rx DMA transfer when acting as flow controller */
290 if (quirks & DW_UART_QUIRK_IS_DMA_FC && up->dma && up->dma->rx_running && rx_timeout) {
291 uart_port_lock_irqsave(p, &flags);
292 status = serial_lsr_in(up);
293 uart_port_unlock_irqrestore(p, flags);
294
295 if (status & (UART_LSR_DR | UART_LSR_BI)) {
296 dw8250_writel_ext(p, RZN1_UART_RDMACR, 0);
297 dw8250_writel_ext(p, DW_UART_DMASA, 1);
298 }
299 }
300
301 if (serial8250_handle_irq(p, iir))
302 return 1;
303
304 if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
305 /* Clear the USR */
306 (void)p->serial_in(p, d->pdata->usr_reg);
307
308 return 1;
309 }
310
311 return 0;
312 }
313
dw8250_clk_work_cb(struct work_struct * work)314 static void dw8250_clk_work_cb(struct work_struct *work)
315 {
316 struct dw8250_data *d = work_to_dw8250_data(work);
317 struct uart_8250_port *up;
318 unsigned long rate;
319
320 rate = clk_get_rate(d->clk);
321 if (rate <= 0)
322 return;
323
324 up = serial8250_get_port(d->data.line);
325
326 serial8250_update_uartclk(&up->port, rate);
327 }
328
dw8250_clk_notifier_cb(struct notifier_block * nb,unsigned long event,void * data)329 static int dw8250_clk_notifier_cb(struct notifier_block *nb,
330 unsigned long event, void *data)
331 {
332 struct dw8250_data *d = clk_to_dw8250_data(nb);
333
334 /*
335 * We have no choice but to defer the uartclk update due to two
336 * deadlocks. First one is caused by a recursive mutex lock which
337 * happens when clk_set_rate() is called from dw8250_set_termios().
338 * Second deadlock is more tricky and is caused by an inverted order of
339 * the clk and tty-port mutexes lock. It happens if clock rate change
340 * is requested asynchronously while set_termios() is executed between
341 * tty-port mutex lock and clk_set_rate() function invocation and
342 * vise-versa. Anyway if we didn't have the reference clock alteration
343 * in the dw8250_set_termios() method we wouldn't have needed this
344 * deferred event handling complication.
345 */
346 if (event == POST_RATE_CHANGE) {
347 queue_work(system_unbound_wq, &d->clk_work);
348 return NOTIFY_OK;
349 }
350
351 return NOTIFY_DONE;
352 }
353
354 static void
dw8250_do_pm(struct uart_port * port,unsigned int state,unsigned int old)355 dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
356 {
357 if (!state)
358 pm_runtime_get_sync(port->dev);
359
360 serial8250_do_pm(port, state, old);
361
362 if (state)
363 pm_runtime_put_sync_suspend(port->dev);
364 }
365
dw8250_set_termios(struct uart_port * p,struct ktermios * termios,const struct ktermios * old)366 static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
367 const struct ktermios *old)
368 {
369 unsigned long newrate = tty_termios_baud_rate(termios) * 16;
370 struct dw8250_data *d = to_dw8250_data(p->private_data);
371 long rate;
372 int ret;
373
374 clk_disable_unprepare(d->clk);
375 rate = clk_round_rate(d->clk, newrate);
376 if (rate > 0) {
377 /*
378 * Note that any clock-notifer worker will block in
379 * serial8250_update_uartclk() until we are done.
380 */
381 ret = clk_set_rate(d->clk, newrate);
382 if (!ret)
383 p->uartclk = rate;
384 }
385 clk_prepare_enable(d->clk);
386
387 dw8250_do_set_termios(p, termios, old);
388 }
389
dw8250_set_ldisc(struct uart_port * p,struct ktermios * termios)390 static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios)
391 {
392 struct uart_8250_port *up = up_to_u8250p(p);
393 unsigned int mcr = p->serial_in(p, UART_MCR);
394
395 if (up->capabilities & UART_CAP_IRDA) {
396 if (termios->c_line == N_IRDA)
397 mcr |= DW_UART_MCR_SIRE;
398 else
399 mcr &= ~DW_UART_MCR_SIRE;
400
401 p->serial_out(p, UART_MCR, mcr);
402 }
403 serial8250_do_set_ldisc(p, termios);
404 }
405
406 /*
407 * dw8250_fallback_dma_filter will prevent the UART from getting just any free
408 * channel on platforms that have DMA engines, but don't have any channels
409 * assigned to the UART.
410 *
411 * REVISIT: This is a work around for limitation in the DMA Engine API. Once the
412 * core problem is fixed, this function is no longer needed.
413 */
dw8250_fallback_dma_filter(struct dma_chan * chan,void * param)414 static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param)
415 {
416 return false;
417 }
418
dw8250_idma_filter(struct dma_chan * chan,void * param)419 static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
420 {
421 return param == chan->device->dev;
422 }
423
dw8250_rzn1_get_dmacr_burst(int max_burst)424 static u32 dw8250_rzn1_get_dmacr_burst(int max_burst)
425 {
426 if (max_burst >= 8)
427 return RZN1_UART_xDMACR_8_WORD_BURST;
428 else if (max_burst >= 4)
429 return RZN1_UART_xDMACR_4_WORD_BURST;
430 else
431 return RZN1_UART_xDMACR_1_WORD_BURST;
432 }
433
dw8250_prepare_tx_dma(struct uart_8250_port * p)434 static void dw8250_prepare_tx_dma(struct uart_8250_port *p)
435 {
436 struct uart_port *up = &p->port;
437 struct uart_8250_dma *dma = p->dma;
438 u32 val;
439
440 dw8250_writel_ext(up, RZN1_UART_TDMACR, 0);
441 val = dw8250_rzn1_get_dmacr_burst(dma->txconf.dst_maxburst) |
442 RZN1_UART_xDMACR_BLK_SZ(dma->tx_size) |
443 RZN1_UART_xDMACR_DMA_EN;
444 dw8250_writel_ext(up, RZN1_UART_TDMACR, val);
445 }
446
dw8250_prepare_rx_dma(struct uart_8250_port * p)447 static void dw8250_prepare_rx_dma(struct uart_8250_port *p)
448 {
449 struct uart_port *up = &p->port;
450 struct uart_8250_dma *dma = p->dma;
451 u32 val;
452
453 dw8250_writel_ext(up, RZN1_UART_RDMACR, 0);
454 val = dw8250_rzn1_get_dmacr_burst(dma->rxconf.src_maxburst) |
455 RZN1_UART_xDMACR_BLK_SZ(dma->rx_size) |
456 RZN1_UART_xDMACR_DMA_EN;
457 dw8250_writel_ext(up, RZN1_UART_RDMACR, val);
458 }
459
dw8250_quirks(struct uart_port * p,struct dw8250_data * data)460 static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
461 {
462 unsigned int quirks = data->pdata ? data->pdata->quirks : 0;
463 u32 cpr_value = data->pdata ? data->pdata->cpr_value : 0;
464
465 if (quirks & DW_UART_QUIRK_CPR_VALUE)
466 data->data.cpr_value = cpr_value;
467
468 #ifdef CONFIG_64BIT
469 if (quirks & DW_UART_QUIRK_OCTEON) {
470 p->serial_in = dw8250_serial_inq;
471 p->serial_out = dw8250_serial_outq;
472 p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
473 p->type = PORT_OCTEON;
474 data->skip_autocfg = true;
475 }
476 #endif
477
478 if (quirks & DW_UART_QUIRK_ARMADA_38X)
479 p->serial_out = dw8250_serial_out38x;
480 if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
481 p->set_termios = dw8250_do_set_termios;
482 if (quirks & DW_UART_QUIRK_IS_DMA_FC) {
483 data->data.dma.txconf.device_fc = 1;
484 data->data.dma.rxconf.device_fc = 1;
485 data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma;
486 data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma;
487 }
488 if (quirks & DW_UART_QUIRK_APMC0D08) {
489 p->iotype = UPIO_MEM32;
490 p->regshift = 2;
491 p->serial_in = dw8250_serial_in32;
492 data->uart_16550_compatible = true;
493 }
494
495 /* Platforms with iDMA 64-bit */
496 if (platform_get_resource_byname(to_platform_device(p->dev),
497 IORESOURCE_MEM, "lpss_priv")) {
498 data->data.dma.rx_param = p->dev->parent;
499 data->data.dma.tx_param = p->dev->parent;
500 data->data.dma.fn = dw8250_idma_filter;
501 }
502 }
503
dw8250_reset_control_assert(void * data)504 static void dw8250_reset_control_assert(void *data)
505 {
506 reset_control_assert(data);
507 }
508
dw8250_probe(struct platform_device * pdev)509 static int dw8250_probe(struct platform_device *pdev)
510 {
511 struct uart_8250_port uart = {}, *up = &uart;
512 struct uart_port *p = &up->port;
513 struct device *dev = &pdev->dev;
514 struct dw8250_data *data;
515 struct resource *regs;
516 int err;
517
518 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
519 if (!regs)
520 return dev_err_probe(dev, -EINVAL, "no registers defined\n");
521
522 spin_lock_init(&p->lock);
523 p->handle_irq = dw8250_handle_irq;
524 p->pm = dw8250_do_pm;
525 p->type = PORT_8250;
526 p->flags = UPF_FIXED_PORT;
527 p->dev = dev;
528 p->set_ldisc = dw8250_set_ldisc;
529 p->set_termios = dw8250_set_termios;
530
531 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
532 if (!data)
533 return -ENOMEM;
534
535 data->data.dma.fn = dw8250_fallback_dma_filter;
536 data->pdata = device_get_match_data(p->dev);
537 p->private_data = &data->data;
538
539 data->uart_16550_compatible = device_property_read_bool(dev,
540 "snps,uart-16550-compatible");
541
542 p->mapbase = regs->start;
543 p->mapsize = resource_size(regs);
544
545 p->membase = devm_ioremap(dev, p->mapbase, p->mapsize);
546 if (!p->membase)
547 return -ENOMEM;
548
549 err = uart_read_port_properties(p);
550 /* no interrupt -> fall back to polling */
551 if (err == -ENXIO)
552 err = 0;
553 if (err)
554 return err;
555
556 switch (p->iotype) {
557 case UPIO_MEM:
558 p->serial_in = dw8250_serial_in;
559 p->serial_out = dw8250_serial_out;
560 break;
561 case UPIO_MEM32:
562 p->serial_in = dw8250_serial_in32;
563 p->serial_out = dw8250_serial_out32;
564 break;
565 case UPIO_MEM32BE:
566 p->serial_in = dw8250_serial_in32be;
567 p->serial_out = dw8250_serial_out32be;
568 break;
569 default:
570 return -ENODEV;
571 }
572
573 if (device_property_read_bool(dev, "dcd-override")) {
574 /* Always report DCD as active */
575 data->msr_mask_on |= UART_MSR_DCD;
576 data->msr_mask_off |= UART_MSR_DDCD;
577 }
578
579 if (device_property_read_bool(dev, "dsr-override")) {
580 /* Always report DSR as active */
581 data->msr_mask_on |= UART_MSR_DSR;
582 data->msr_mask_off |= UART_MSR_DDSR;
583 }
584
585 if (device_property_read_bool(dev, "cts-override")) {
586 /* Always report CTS as active */
587 data->msr_mask_on |= UART_MSR_CTS;
588 data->msr_mask_off |= UART_MSR_DCTS;
589 }
590
591 if (device_property_read_bool(dev, "ri-override")) {
592 /* Always report Ring indicator as inactive */
593 data->msr_mask_off |= UART_MSR_RI;
594 data->msr_mask_off |= UART_MSR_TERI;
595 }
596
597 /* If there is separate baudclk, get the rate from it. */
598 data->clk = devm_clk_get_optional_enabled(dev, "baudclk");
599 if (data->clk == NULL)
600 data->clk = devm_clk_get_optional_enabled(dev, NULL);
601 if (IS_ERR(data->clk))
602 return dev_err_probe(dev, PTR_ERR(data->clk),
603 "failed to get baudclk\n");
604
605 INIT_WORK(&data->clk_work, dw8250_clk_work_cb);
606 data->clk_notifier.notifier_call = dw8250_clk_notifier_cb;
607
608 if (data->clk)
609 p->uartclk = clk_get_rate(data->clk);
610
611 /* If no clock rate is defined, fail. */
612 if (!p->uartclk)
613 return dev_err_probe(dev, -EINVAL, "clock rate not defined\n");
614
615 data->pclk = devm_clk_get_optional_enabled(dev, "apb_pclk");
616 if (IS_ERR(data->pclk))
617 return PTR_ERR(data->pclk);
618
619 data->rst = devm_reset_control_array_get_optional_exclusive(dev);
620 if (IS_ERR(data->rst))
621 return PTR_ERR(data->rst);
622
623 reset_control_deassert(data->rst);
624
625 err = devm_add_action_or_reset(dev, dw8250_reset_control_assert, data->rst);
626 if (err)
627 return err;
628
629 dw8250_quirks(p, data);
630
631 /* If the Busy Functionality is not implemented, don't handle it */
632 if (data->uart_16550_compatible)
633 p->handle_irq = NULL;
634
635 if (!data->skip_autocfg)
636 dw8250_setup_port(p);
637
638 /* If we have a valid fifosize, try hooking up DMA */
639 if (p->fifosize) {
640 data->data.dma.rxconf.src_maxburst = p->fifosize / 4;
641 data->data.dma.txconf.dst_maxburst = p->fifosize / 4;
642 up->dma = &data->data.dma;
643 }
644
645 data->data.line = serial8250_register_8250_port(up);
646 if (data->data.line < 0)
647 return data->data.line;
648
649 /*
650 * Some platforms may provide a reference clock shared between several
651 * devices. In this case any clock state change must be known to the
652 * UART port at least post factum.
653 */
654 if (data->clk) {
655 err = clk_notifier_register(data->clk, &data->clk_notifier);
656 if (err)
657 return dev_err_probe(dev, err, "Failed to set the clock notifier\n");
658 queue_work(system_unbound_wq, &data->clk_work);
659 }
660
661 platform_set_drvdata(pdev, data);
662
663 pm_runtime_set_active(dev);
664 pm_runtime_enable(dev);
665
666 return 0;
667 }
668
dw8250_remove(struct platform_device * pdev)669 static void dw8250_remove(struct platform_device *pdev)
670 {
671 struct dw8250_data *data = platform_get_drvdata(pdev);
672 struct device *dev = &pdev->dev;
673
674 pm_runtime_get_sync(dev);
675
676 if (data->clk) {
677 clk_notifier_unregister(data->clk, &data->clk_notifier);
678
679 flush_work(&data->clk_work);
680 }
681
682 serial8250_unregister_port(data->data.line);
683
684 pm_runtime_disable(dev);
685 pm_runtime_put_noidle(dev);
686 }
687
dw8250_suspend(struct device * dev)688 static int dw8250_suspend(struct device *dev)
689 {
690 struct dw8250_data *data = dev_get_drvdata(dev);
691
692 serial8250_suspend_port(data->data.line);
693
694 return 0;
695 }
696
dw8250_resume(struct device * dev)697 static int dw8250_resume(struct device *dev)
698 {
699 struct dw8250_data *data = dev_get_drvdata(dev);
700
701 serial8250_resume_port(data->data.line);
702
703 return 0;
704 }
705
dw8250_runtime_suspend(struct device * dev)706 static int dw8250_runtime_suspend(struct device *dev)
707 {
708 struct dw8250_data *data = dev_get_drvdata(dev);
709
710 clk_disable_unprepare(data->clk);
711
712 clk_disable_unprepare(data->pclk);
713
714 return 0;
715 }
716
dw8250_runtime_resume(struct device * dev)717 static int dw8250_runtime_resume(struct device *dev)
718 {
719 struct dw8250_data *data = dev_get_drvdata(dev);
720
721 clk_prepare_enable(data->pclk);
722
723 clk_prepare_enable(data->clk);
724
725 return 0;
726 }
727
728 static const struct dev_pm_ops dw8250_pm_ops = {
729 SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
730 RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
731 };
732
733 static const struct dw8250_platform_data dw8250_dw_apb = {
734 .usr_reg = DW_UART_USR,
735 };
736
737 static const struct dw8250_platform_data dw8250_octeon_3860_data = {
738 .usr_reg = OCTEON_UART_USR,
739 .quirks = DW_UART_QUIRK_OCTEON,
740 };
741
742 static const struct dw8250_platform_data dw8250_armada_38x_data = {
743 .usr_reg = DW_UART_USR,
744 .quirks = DW_UART_QUIRK_ARMADA_38X,
745 };
746
747 static const struct dw8250_platform_data dw8250_renesas_rzn1_data = {
748 .usr_reg = DW_UART_USR,
749 .cpr_value = 0x00012f32,
750 .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC,
751 };
752
753 static const struct dw8250_platform_data dw8250_starfive_jh7100_data = {
754 .usr_reg = DW_UART_USR,
755 .quirks = DW_UART_QUIRK_SKIP_SET_RATE,
756 };
757
758 static const struct of_device_id dw8250_of_match[] = {
759 { .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb },
760 { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data },
761 { .compatible = "marvell,armada-38x-uart", .data = &dw8250_armada_38x_data },
762 { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data },
763 { .compatible = "starfive,jh7100-uart", .data = &dw8250_starfive_jh7100_data },
764 { /* Sentinel */ }
765 };
766 MODULE_DEVICE_TABLE(of, dw8250_of_match);
767
768 static const struct dw8250_platform_data dw8250_apmc0d08 = {
769 .usr_reg = DW_UART_USR,
770 .quirks = DW_UART_QUIRK_APMC0D08,
771 };
772
773 static const struct acpi_device_id dw8250_acpi_match[] = {
774 { "80860F0A", (kernel_ulong_t)&dw8250_dw_apb },
775 { "8086228A", (kernel_ulong_t)&dw8250_dw_apb },
776 { "AMD0020", (kernel_ulong_t)&dw8250_dw_apb },
777 { "AMDI0020", (kernel_ulong_t)&dw8250_dw_apb },
778 { "AMDI0022", (kernel_ulong_t)&dw8250_dw_apb },
779 { "APMC0D08", (kernel_ulong_t)&dw8250_apmc0d08 },
780 { "BRCM2032", (kernel_ulong_t)&dw8250_dw_apb },
781 { "HISI0031", (kernel_ulong_t)&dw8250_dw_apb },
782 { "INT33C4", (kernel_ulong_t)&dw8250_dw_apb },
783 { "INT33C5", (kernel_ulong_t)&dw8250_dw_apb },
784 { "INT3434", (kernel_ulong_t)&dw8250_dw_apb },
785 { "INT3435", (kernel_ulong_t)&dw8250_dw_apb },
786 { "INTC10EE", (kernel_ulong_t)&dw8250_dw_apb },
787 { },
788 };
789 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
790
791 static struct platform_driver dw8250_platform_driver = {
792 .driver = {
793 .name = "dw-apb-uart",
794 .pm = pm_ptr(&dw8250_pm_ops),
795 .of_match_table = dw8250_of_match,
796 .acpi_match_table = dw8250_acpi_match,
797 },
798 .probe = dw8250_probe,
799 .remove_new = dw8250_remove,
800 };
801
802 module_platform_driver(dw8250_platform_driver);
803
804 MODULE_AUTHOR("Jamie Iles");
805 MODULE_LICENSE("GPL");
806 MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");
807 MODULE_ALIAS("platform:dw-apb-uart");
808