1 /*
2 * net/tipc/core.c: TIPC module code
3 *
4 * Copyright (c) 2003-2006, 2013, Ericsson AB
5 * Copyright (c) 2005-2006, 2010-2013, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37 #include "core.h"
38 #include "name_table.h"
39 #include "subscr.h"
40 #include "bearer.h"
41 #include "net.h"
42 #include "socket.h"
43 #include "bcast.h"
44 #include "node.h"
45 #include "crypto.h"
46
47 #include <linux/module.h>
48 #include <linux/wait_bit.h>
49
50 /* configurable TIPC parameters */
51 unsigned int tipc_net_id __read_mostly;
52 int sysctl_tipc_rmem[3] __read_mostly; /* min/default/max */
53
tipc_init_net(struct net * net)54 static int __net_init tipc_init_net(struct net *net)
55 {
56 struct tipc_net *tn = net_generic(net, tipc_net_id);
57 int err;
58
59 tn->net_id = 4711;
60 tn->node_addr = 0;
61 tn->trial_addr = 0;
62 tn->addr_trial_end = 0;
63 tn->capabilities = TIPC_NODE_CAPABILITIES;
64 INIT_WORK(&tn->work, tipc_net_finalize_work);
65 memset(tn->node_id, 0, sizeof(tn->node_id));
66 memset(tn->node_id_string, 0, sizeof(tn->node_id_string));
67 tn->mon_threshold = TIPC_DEF_MON_THRESHOLD;
68 get_random_bytes(&tn->random, sizeof(int));
69 INIT_LIST_HEAD(&tn->node_list);
70 spin_lock_init(&tn->node_list_lock);
71
72 #ifdef CONFIG_TIPC_CRYPTO
73 err = tipc_crypto_start(&tn->crypto_tx, net, NULL);
74 if (err)
75 goto out_crypto;
76 #endif
77 err = tipc_sk_rht_init(net);
78 if (err)
79 goto out_sk_rht;
80
81 err = tipc_nametbl_init(net);
82 if (err)
83 goto out_nametbl;
84
85 err = tipc_bcast_init(net);
86 if (err)
87 goto out_bclink;
88
89 err = tipc_attach_loopback(net);
90 if (err)
91 goto out_bclink;
92
93 return 0;
94
95 out_bclink:
96 tipc_nametbl_stop(net);
97 out_nametbl:
98 tipc_sk_rht_destroy(net);
99 out_sk_rht:
100
101 #ifdef CONFIG_TIPC_CRYPTO
102 tipc_crypto_stop(&tn->crypto_tx);
103 out_crypto:
104 #endif
105 return err;
106 }
107
tipc_exit_net(struct net * net)108 static void __net_exit tipc_exit_net(struct net *net)
109 {
110 struct tipc_net *tn = tipc_net(net);
111
112 tipc_detach_loopback(net);
113 tipc_net_stop(net);
114 /* Make sure the tipc_net_finalize_work() finished */
115 cancel_work_sync(&tn->work);
116 tipc_bcast_stop(net);
117 tipc_nametbl_stop(net);
118 tipc_sk_rht_destroy(net);
119 #ifdef CONFIG_TIPC_CRYPTO
120 tipc_crypto_stop(&tipc_net(net)->crypto_tx);
121 #endif
122 wait_var_event(&tn->wq_count, atomic_read(&tn->wq_count) == 0);
123 }
124
tipc_pernet_pre_exit(struct net * net)125 static void __net_exit tipc_pernet_pre_exit(struct net *net)
126 {
127 tipc_node_pre_cleanup_net(net);
128 }
129
130 static struct pernet_operations tipc_pernet_pre_exit_ops = {
131 .pre_exit = tipc_pernet_pre_exit,
132 };
133
134 static struct pernet_operations tipc_net_ops = {
135 .init = tipc_init_net,
136 .exit = tipc_exit_net,
137 .id = &tipc_net_id,
138 .size = sizeof(struct tipc_net),
139 };
140
141 static struct pernet_operations tipc_topsrv_net_ops = {
142 .init = tipc_topsrv_init_net,
143 .exit = tipc_topsrv_exit_net,
144 };
145
tipc_init(void)146 static int __init tipc_init(void)
147 {
148 int err;
149
150 pr_info("Activated (version " TIPC_MOD_VER ")\n");
151
152 sysctl_tipc_rmem[0] = RCVBUF_MIN;
153 sysctl_tipc_rmem[1] = RCVBUF_DEF;
154 sysctl_tipc_rmem[2] = RCVBUF_MAX;
155
156 err = tipc_register_sysctl();
157 if (err)
158 goto out_sysctl;
159
160 err = register_pernet_device(&tipc_net_ops);
161 if (err)
162 goto out_pernet;
163
164 err = tipc_socket_init();
165 if (err)
166 goto out_socket;
167
168 err = register_pernet_device(&tipc_topsrv_net_ops);
169 if (err)
170 goto out_pernet_topsrv;
171
172 err = register_pernet_subsys(&tipc_pernet_pre_exit_ops);
173 if (err)
174 goto out_register_pernet_subsys;
175
176 err = tipc_bearer_setup();
177 if (err)
178 goto out_bearer;
179
180 err = tipc_netlink_start();
181 if (err)
182 goto out_netlink;
183
184 err = tipc_netlink_compat_start();
185 if (err)
186 goto out_netlink_compat;
187
188 pr_info("Started in single node mode\n");
189 return 0;
190
191 out_netlink_compat:
192 tipc_netlink_stop();
193 out_netlink:
194 tipc_bearer_cleanup();
195 out_bearer:
196 unregister_pernet_subsys(&tipc_pernet_pre_exit_ops);
197 out_register_pernet_subsys:
198 unregister_pernet_device(&tipc_topsrv_net_ops);
199 out_pernet_topsrv:
200 tipc_socket_stop();
201 out_socket:
202 unregister_pernet_device(&tipc_net_ops);
203 out_pernet:
204 tipc_unregister_sysctl();
205 out_sysctl:
206 pr_err("Unable to start in single node mode\n");
207 return err;
208 }
209
tipc_exit(void)210 static void __exit tipc_exit(void)
211 {
212 tipc_netlink_compat_stop();
213 tipc_netlink_stop();
214 tipc_bearer_cleanup();
215 unregister_pernet_subsys(&tipc_pernet_pre_exit_ops);
216 unregister_pernet_device(&tipc_topsrv_net_ops);
217 tipc_socket_stop();
218 unregister_pernet_device(&tipc_net_ops);
219 tipc_unregister_sysctl();
220
221 /* TODO: Wait for all timers that called call_rcu() to finish before
222 * calling rcu_barrier().
223 */
224 rcu_barrier();
225
226 pr_info("Deactivated\n");
227 }
228
229 module_init(tipc_init);
230 module_exit(tipc_exit);
231
232 MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
233 MODULE_LICENSE("Dual BSD/GPL");
234 MODULE_VERSION(TIPC_MOD_VER);
235