1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * CPU complex suspend & resume functions for Tegra SoCs
4 *
5 * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved.
6 */
7
8 #include <linux/clk/tegra.h>
9 #include <linux/cpumask.h>
10 #include <linux/cpu_pm.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/io.h>
14 #include <linux/kernel.h>
15 #include <linux/slab.h>
16 #include <linux/spinlock.h>
17 #include <linux/suspend.h>
18
19 #include <linux/firmware/trusted_foundations.h>
20
21 #include <soc/tegra/flowctrl.h>
22 #include <soc/tegra/fuse.h>
23 #include <soc/tegra/pm.h>
24 #include <soc/tegra/pmc.h>
25
26 #include <asm/cacheflush.h>
27 #include <asm/firmware.h>
28 #include <asm/idmap.h>
29 #include <asm/proc-fns.h>
30 #include <asm/smp_plat.h>
31 #include <asm/suspend.h>
32 #include <asm/tlbflush.h>
33
34 #include "iomap.h"
35 #include "pm.h"
36 #include "reset.h"
37 #include "sleep.h"
38
39 #ifdef CONFIG_PM_SLEEP
40 static DEFINE_SPINLOCK(tegra_lp2_lock);
41 static u32 iram_save_size;
42 static void *iram_save_addr;
43 struct tegra_lp1_iram tegra_lp1_iram;
44 void (*tegra_tear_down_cpu)(void);
45 void (*tegra_sleep_core_finish)(unsigned long v2p);
46 static int (*tegra_sleep_func)(unsigned long v2p);
47
tegra_tear_down_cpu_init(void)48 static void tegra_tear_down_cpu_init(void)
49 {
50 switch (tegra_get_chip_id()) {
51 case TEGRA20:
52 if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
53 tegra_tear_down_cpu = tegra20_tear_down_cpu;
54 break;
55 case TEGRA30:
56 case TEGRA114:
57 case TEGRA124:
58 if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
59 IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
60 IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
61 tegra_tear_down_cpu = tegra30_tear_down_cpu;
62 break;
63 }
64 }
65
66 /*
67 * restore_cpu_complex
68 *
69 * restores cpu clock setting, clears flow controller
70 *
71 * Always called on CPU 0.
72 */
restore_cpu_complex(void)73 static void restore_cpu_complex(void)
74 {
75 int cpu = smp_processor_id();
76
77 BUG_ON(cpu != 0);
78
79 #ifdef CONFIG_SMP
80 cpu = cpu_logical_map(cpu);
81 #endif
82
83 /* Restore the CPU clock settings */
84 tegra_cpu_clock_resume();
85
86 flowctrl_cpu_suspend_exit(cpu);
87 }
88
89 /*
90 * suspend_cpu_complex
91 *
92 * saves pll state for use by restart_plls, prepares flow controller for
93 * transition to suspend state
94 *
95 * Must always be called on cpu 0.
96 */
suspend_cpu_complex(void)97 static void suspend_cpu_complex(void)
98 {
99 int cpu = smp_processor_id();
100
101 BUG_ON(cpu != 0);
102
103 #ifdef CONFIG_SMP
104 cpu = cpu_logical_map(cpu);
105 #endif
106
107 /* Save the CPU clock settings */
108 tegra_cpu_clock_suspend();
109
110 flowctrl_cpu_suspend_enter(cpu);
111 }
112
tegra_pm_clear_cpu_in_lp2(void)113 void tegra_pm_clear_cpu_in_lp2(void)
114 {
115 int phy_cpu_id = cpu_logical_map(smp_processor_id());
116 u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
117
118 spin_lock(&tegra_lp2_lock);
119
120 BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id)));
121 *cpu_in_lp2 &= ~BIT(phy_cpu_id);
122
123 spin_unlock(&tegra_lp2_lock);
124 }
125
tegra_pm_set_cpu_in_lp2(void)126 void tegra_pm_set_cpu_in_lp2(void)
127 {
128 int phy_cpu_id = cpu_logical_map(smp_processor_id());
129 u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
130
131 spin_lock(&tegra_lp2_lock);
132
133 BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
134 *cpu_in_lp2 |= BIT(phy_cpu_id);
135
136 spin_unlock(&tegra_lp2_lock);
137 }
138
tegra_sleep_cpu(unsigned long v2p)139 static int tegra_sleep_cpu(unsigned long v2p)
140 {
141 if (tegra_cpu_car_ops->rail_off_ready &&
142 WARN_ON(!tegra_cpu_rail_off_ready()))
143 return -EBUSY;
144
145 /*
146 * L2 cache disabling using kernel API only allowed when all
147 * secondary CPU's are offline. Cache have to be disabled with
148 * MMU-on if cache maintenance is done via Trusted Foundations
149 * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30
150 * if any of secondary CPU's is online and this is the LP2-idle
151 * code-path only for Tegra20/30.
152 */
153 #ifdef CONFIG_OUTER_CACHE
154 if (trusted_foundations_registered() && outer_cache.disable)
155 outer_cache.disable();
156 #endif
157 /*
158 * Note that besides of setting up CPU reset vector this firmware
159 * call may also do the following, depending on the FW version:
160 * 1) Disable L2. But this doesn't matter since we already
161 * disabled the L2.
162 * 2) Disable D-cache. This need to be taken into account in
163 * particular by the tegra_disable_clean_inv_dcache() which
164 * shall avoid the re-disable.
165 */
166 call_firmware_op(prepare_idle, TF_PM_MODE_LP2);
167
168 setup_mm_for_reboot();
169 tegra_sleep_cpu_finish(v2p);
170
171 /* should never here */
172 BUG();
173
174 return 0;
175 }
176
tegra_pm_set(enum tegra_suspend_mode mode)177 static void tegra_pm_set(enum tegra_suspend_mode mode)
178 {
179 u32 value;
180
181 switch (tegra_get_chip_id()) {
182 case TEGRA20:
183 case TEGRA30:
184 break;
185 default:
186 /* Turn off CRAIL */
187 value = flowctrl_read_cpu_csr(0);
188 value &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK;
189 value |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL;
190 flowctrl_write_cpu_csr(0, value);
191 break;
192 }
193
194 tegra_pmc_enter_suspend_mode(mode);
195 }
196
tegra_pm_enter_lp2(void)197 int tegra_pm_enter_lp2(void)
198 {
199 int err;
200
201 tegra_pm_set(TEGRA_SUSPEND_LP2);
202
203 cpu_cluster_pm_enter();
204 suspend_cpu_complex();
205
206 err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
207
208 /*
209 * Resume L2 cache if it wasn't re-enabled early during resume,
210 * which is the case for Tegra30 that has to re-enable the cache
211 * via firmware call. In other cases cache is already enabled and
212 * hence re-enabling is a no-op. This is always a no-op on Tegra114+.
213 */
214 outer_resume();
215
216 restore_cpu_complex();
217 cpu_cluster_pm_exit();
218
219 call_firmware_op(prepare_idle, TF_PM_MODE_NONE);
220
221 return err;
222 }
223
tegra_pm_validate_suspend_mode(enum tegra_suspend_mode mode)224 enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
225 enum tegra_suspend_mode mode)
226 {
227 /*
228 * The Tegra devices support suspending to LP1 or lower currently.
229 */
230 if (mode > TEGRA_SUSPEND_LP1)
231 return TEGRA_SUSPEND_LP1;
232
233 return mode;
234 }
235
tegra_sleep_core(unsigned long v2p)236 static int tegra_sleep_core(unsigned long v2p)
237 {
238 /*
239 * Cache have to be disabled with MMU-on if cache maintenance is done
240 * via Trusted Foundations firmware. This is a no-op on Tegra114+.
241 */
242 if (trusted_foundations_registered())
243 outer_disable();
244
245 call_firmware_op(prepare_idle, TF_PM_MODE_LP1);
246
247 setup_mm_for_reboot();
248 tegra_sleep_core_finish(v2p);
249
250 /* should never here */
251 BUG();
252
253 return 0;
254 }
255
256 /*
257 * tegra_lp1_iram_hook
258 *
259 * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
260 * SDRAM. These codes not be copied to IRAM in this fuction. We need to
261 * copy these code to IRAM before LP0/LP1 suspend and restore the content
262 * of IRAM after resume.
263 */
tegra_lp1_iram_hook(void)264 static bool tegra_lp1_iram_hook(void)
265 {
266 switch (tegra_get_chip_id()) {
267 case TEGRA20:
268 if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
269 tegra20_lp1_iram_hook();
270 break;
271 case TEGRA30:
272 case TEGRA114:
273 case TEGRA124:
274 if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
275 IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
276 IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
277 tegra30_lp1_iram_hook();
278 break;
279 default:
280 break;
281 }
282
283 if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr)
284 return false;
285
286 iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr;
287 iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL);
288 if (!iram_save_addr)
289 return false;
290
291 return true;
292 }
293
tegra_sleep_core_init(void)294 static bool tegra_sleep_core_init(void)
295 {
296 switch (tegra_get_chip_id()) {
297 case TEGRA20:
298 if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
299 tegra20_sleep_core_init();
300 break;
301 case TEGRA30:
302 case TEGRA114:
303 case TEGRA124:
304 if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
305 IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
306 IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
307 tegra30_sleep_core_init();
308 break;
309 default:
310 break;
311 }
312
313 if (!tegra_sleep_core_finish)
314 return false;
315
316 return true;
317 }
318
tegra_suspend_enter_lp1(void)319 static void tegra_suspend_enter_lp1(void)
320 {
321 /* copy the reset vector & SDRAM shutdown code into IRAM */
322 memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
323 iram_save_size);
324 memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
325 tegra_lp1_iram.start_addr, iram_save_size);
326
327 *((u32 *)tegra_cpu_lp1_mask) = 1;
328 }
329
tegra_suspend_exit_lp1(void)330 static void tegra_suspend_exit_lp1(void)
331 {
332 /* restore IRAM */
333 memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
334 iram_save_size);
335
336 *(u32 *)tegra_cpu_lp1_mask = 0;
337 }
338
339 static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
340 [TEGRA_SUSPEND_NONE] = "none",
341 [TEGRA_SUSPEND_LP2] = "LP2",
342 [TEGRA_SUSPEND_LP1] = "LP1",
343 [TEGRA_SUSPEND_LP0] = "LP0",
344 };
345
tegra_suspend_enter(suspend_state_t state)346 static int tegra_suspend_enter(suspend_state_t state)
347 {
348 enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
349
350 if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
351 mode >= TEGRA_MAX_SUSPEND_MODE))
352 return -EINVAL;
353
354 pr_info("Entering suspend state %s\n", lp_state[mode]);
355
356 tegra_pm_set(mode);
357
358 local_fiq_disable();
359
360 suspend_cpu_complex();
361 switch (mode) {
362 case TEGRA_SUSPEND_LP1:
363 tegra_suspend_enter_lp1();
364 break;
365 case TEGRA_SUSPEND_LP2:
366 tegra_pm_set_cpu_in_lp2();
367 break;
368 default:
369 break;
370 }
371
372 cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
373
374 /*
375 * Resume L2 cache if it wasn't re-enabled early during resume,
376 * which is the case for Tegra30 that has to re-enable the cache
377 * via firmware call. In other cases cache is already enabled and
378 * hence re-enabling is a no-op.
379 */
380 outer_resume();
381
382 switch (mode) {
383 case TEGRA_SUSPEND_LP1:
384 tegra_suspend_exit_lp1();
385 break;
386 case TEGRA_SUSPEND_LP2:
387 tegra_pm_clear_cpu_in_lp2();
388 break;
389 default:
390 break;
391 }
392 restore_cpu_complex();
393
394 local_fiq_enable();
395
396 call_firmware_op(prepare_idle, TF_PM_MODE_NONE);
397
398 return 0;
399 }
400
401 static const struct platform_suspend_ops tegra_suspend_ops = {
402 .valid = suspend_valid_only_mem,
403 .enter = tegra_suspend_enter,
404 };
405
tegra_pm_init_suspend(void)406 void tegra_pm_init_suspend(void)
407 {
408 enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
409
410 if (mode == TEGRA_SUSPEND_NONE)
411 return;
412
413 tegra_tear_down_cpu_init();
414
415 if (mode >= TEGRA_SUSPEND_LP1) {
416 if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) {
417 pr_err("%s: unable to allocate memory for SDRAM"
418 "self-refresh -- LP0/LP1 unavailable\n",
419 __func__);
420 tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2);
421 mode = TEGRA_SUSPEND_LP2;
422 }
423 }
424
425 /* set up sleep function for cpu_suspend */
426 switch (mode) {
427 case TEGRA_SUSPEND_LP1:
428 tegra_sleep_func = tegra_sleep_core;
429 break;
430 case TEGRA_SUSPEND_LP2:
431 tegra_sleep_func = tegra_sleep_cpu;
432 break;
433 default:
434 break;
435 }
436
437 suspend_set_ops(&tegra_suspend_ops);
438 }
439
tegra_pm_park_secondary_cpu(unsigned long cpu)440 int tegra_pm_park_secondary_cpu(unsigned long cpu)
441 {
442 if (cpu > 0) {
443 tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
444
445 if (tegra_get_chip_id() == TEGRA20)
446 tegra20_hotplug_shutdown();
447 else
448 tegra30_hotplug_shutdown();
449 }
450
451 return -EINVAL;
452 }
453 #endif
454