1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * T1042 platform DIU operation
4 *
5 * Copyright 2014 Freescale Semiconductor Inc.
6 */
7
8 #include <linux/init.h>
9 #include <linux/io.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/of_address.h>
14
15 #include <sysdev/fsl_soc.h>
16
17 /*DIU Pixel ClockCR offset in scfg*/
18 #define CCSR_SCFG_PIXCLKCR 0x28
19
20 /* DIU Pixel Clock bits of the PIXCLKCR */
21 #define PIXCLKCR_PXCKEN 0x80000000
22 #define PIXCLKCR_PXCKINV 0x40000000
23 #define PIXCLKCR_PXCKDLY 0x0000FF00
24 #define PIXCLKCR_PXCLK_MASK 0x00FF0000
25
26 /* Some CPLD register definitions */
27 #define CPLD_DIUCSR 0x16
28 #define CPLD_DIUCSR_DVIEN 0x80
29 #define CPLD_DIUCSR_BACKLIGHT 0x0f
30
31 struct device_node *cpld_node;
32
33 /**
34 * t1042rdb_set_monitor_port: switch the output to a different monitor port
35 */
t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port)36 static void t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port)
37 {
38 void __iomem *cpld_base;
39
40 cpld_base = of_iomap(cpld_node, 0);
41 if (!cpld_base) {
42 pr_err("%s: Could not map cpld registers\n", __func__);
43 goto exit;
44 }
45
46 switch (port) {
47 case FSL_DIU_PORT_DVI:
48 /* Enable the DVI(HDMI) port, disable the DFP and
49 * the backlight
50 */
51 clrbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_DVIEN);
52 break;
53 case FSL_DIU_PORT_LVDS:
54 /*
55 * LVDS also needs backlight enabled, otherwise the display
56 * will be blank.
57 */
58 /* Enable the DFP port, disable the DVI*/
59 setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8);
60 setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4);
61 setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT);
62 break;
63 default:
64 pr_err("%s: Unsupported monitor port %i\n", __func__, port);
65 }
66
67 iounmap(cpld_base);
68 exit:
69 of_node_put(cpld_node);
70 }
71
72 /**
73 * t1042rdb_set_pixel_clock: program the DIU's clock
74 * @pixclock: pixel clock in ps (pico seconds)
75 */
t1042rdb_set_pixel_clock(unsigned int pixclock)76 static void t1042rdb_set_pixel_clock(unsigned int pixclock)
77 {
78 struct device_node *scfg_np;
79 void __iomem *scfg;
80 unsigned long freq;
81 u64 temp;
82 u32 pxclk;
83
84 scfg_np = of_find_compatible_node(NULL, NULL, "fsl,t1040-scfg");
85 if (!scfg_np) {
86 pr_err("%s: Missing scfg node. Can not display video.\n",
87 __func__);
88 return;
89 }
90
91 scfg = of_iomap(scfg_np, 0);
92 of_node_put(scfg_np);
93 if (!scfg) {
94 pr_err("%s: Could not map device. Can not display video.\n",
95 __func__);
96 return;
97 }
98
99 /* Convert pixclock into frequency */
100 temp = 1000000000000ULL;
101 do_div(temp, pixclock);
102 freq = temp;
103
104 /*
105 * 'pxclk' is the ratio of the platform clock to the pixel clock.
106 * This number is programmed into the PIXCLKCR register, and the valid
107 * range of values is 2-255.
108 */
109 pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
110 pxclk = clamp_t(u32, pxclk, 2, 255);
111
112 /* Disable the pixel clock, and set it to non-inverted and no delay */
113 clrbits32(scfg + CCSR_SCFG_PIXCLKCR,
114 PIXCLKCR_PXCKEN | PIXCLKCR_PXCKDLY | PIXCLKCR_PXCLK_MASK);
115
116 /* Enable the clock and set the pxclk */
117 setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16));
118
119 iounmap(scfg);
120 }
121
122 /**
123 * t1042rdb_valid_monitor_port: set the monitor port for sysfs
124 */
125 static enum fsl_diu_monitor_port
t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port)126 t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port)
127 {
128 switch (port) {
129 case FSL_DIU_PORT_DVI:
130 case FSL_DIU_PORT_LVDS:
131 return port;
132 default:
133 return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
134 }
135 }
136
t1042rdb_diu_init(void)137 static int __init t1042rdb_diu_init(void)
138 {
139 cpld_node = of_find_compatible_node(NULL, NULL, "fsl,t1042rdb-cpld");
140 if (!cpld_node)
141 return 0;
142
143 diu_ops.set_monitor_port = t1042rdb_set_monitor_port;
144 diu_ops.set_pixel_clock = t1042rdb_set_pixel_clock;
145 diu_ops.valid_monitor_port = t1042rdb_valid_monitor_port;
146
147 return 0;
148 }
149
150 early_initcall(t1042rdb_diu_init);
151
152 MODULE_DESCRIPTION("Freescale T1042 DIU driver");
153 MODULE_LICENSE("GPL");
154