1 // SPDX-License-Identifier: GPL-2.0
2 /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
3 *
4 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
5 * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
6 *
7 * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
8 * Maxim Krasnyanskiy <maxk@qualcomm.com>
9 *
10 * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
11 * rates to be programmed into the UART. Also eliminated a lot of
12 * duplicated code in the console setup.
13 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
14 *
15 * Ported to new 2.5.x UART layer.
16 * David S. Miller <davem@davemloft.net>
17 */
18
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/errno.h>
22 #include <linux/tty.h>
23 #include <linux/tty_flip.h>
24 #include <linux/major.h>
25 #include <linux/string.h>
26 #include <linux/ptrace.h>
27 #include <linux/ioport.h>
28 #include <linux/circ_buf.h>
29 #include <linux/serial.h>
30 #include <linux/sysrq.h>
31 #include <linux/console.h>
32 #include <linux/spinlock.h>
33 #include <linux/slab.h>
34 #include <linux/delay.h>
35 #include <linux/init.h>
36 #include <linux/of.h>
37 #include <linux/platform_device.h>
38
39 #include <linux/io.h>
40 #include <asm/irq.h>
41 #include <asm/prom.h>
42 #include <asm/setup.h>
43
44 #include <linux/serial_core.h>
45 #include <linux/sunserialcore.h>
46
47 #include "sunsab.h"
48
49 struct uart_sunsab_port {
50 struct uart_port port; /* Generic UART port */
51 union sab82532_async_regs __iomem *regs; /* Chip registers */
52 unsigned long irqflags; /* IRQ state flags */
53 int dsr; /* Current DSR state */
54 unsigned int cec_timeout; /* Chip poll timeout... */
55 unsigned int tec_timeout; /* likewise */
56 unsigned char interrupt_mask0;/* ISR0 masking */
57 unsigned char interrupt_mask1;/* ISR1 masking */
58 unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
59 unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
60 unsigned int gis_shift;
61 int type; /* SAB82532 version */
62
63 /* Setting configuration bits while the transmitter is active
64 * can cause garbage characters to get emitted by the chip.
65 * Therefore, we cache such writes here and do the real register
66 * write the next time the transmitter becomes idle.
67 */
68 unsigned int cached_ebrg;
69 unsigned char cached_mode;
70 unsigned char cached_pvr;
71 unsigned char cached_dafo;
72 };
73
74 /*
75 * This assumes you have a 29.4912 MHz clock for your UART.
76 */
77 #define SAB_BASE_BAUD ( 29491200 / 16 )
78
79 static char *sab82532_version[16] = {
80 "V1.0", "V2.0", "V3.2", "V(0x03)",
81 "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
82 "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
83 "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
84 };
85
86 #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
87 #define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */
88
89 #define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */
90 #define SAB82532_XMIT_FIFO_SIZE 32
91
sunsab_tec_wait(struct uart_sunsab_port * up)92 static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
93 {
94 int timeout = up->tec_timeout;
95
96 while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
97 udelay(1);
98 }
99
sunsab_cec_wait(struct uart_sunsab_port * up)100 static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
101 {
102 int timeout = up->cec_timeout;
103
104 while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
105 udelay(1);
106 }
107
108 static struct tty_port *
receive_chars(struct uart_sunsab_port * up,union sab82532_irq_status * stat)109 receive_chars(struct uart_sunsab_port *up,
110 union sab82532_irq_status *stat)
111 {
112 struct tty_port *port = NULL;
113 unsigned char buf[32];
114 int saw_console_brk = 0;
115 int free_fifo = 0;
116 int count = 0;
117 int i;
118
119 if (up->port.state != NULL) /* Unopened serial console */
120 port = &up->port.state->port;
121
122 /* Read number of BYTES (Character + Status) available. */
123 if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
124 count = SAB82532_RECV_FIFO_SIZE;
125 free_fifo++;
126 }
127
128 if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
129 count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
130 free_fifo++;
131 }
132
133 /* Issue a FIFO read command in case we where idle. */
134 if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
135 sunsab_cec_wait(up);
136 writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
137 return port;
138 }
139
140 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
141 free_fifo++;
142
143 /* Read the FIFO. */
144 for (i = 0; i < count; i++)
145 buf[i] = readb(&up->regs->r.rfifo[i]);
146
147 /* Issue Receive Message Complete command. */
148 if (free_fifo) {
149 sunsab_cec_wait(up);
150 writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
151 }
152
153 /* Count may be zero for BRK, so we check for it here */
154 if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
155 (up->port.line == up->port.cons->index))
156 saw_console_brk = 1;
157
158 if (count == 0) {
159 if (unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
160 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
161 SAB82532_ISR0_FERR);
162 up->port.icount.brk++;
163 uart_handle_break(&up->port);
164 }
165 }
166
167 for (i = 0; i < count; i++) {
168 unsigned char ch = buf[i], flag;
169
170 flag = TTY_NORMAL;
171 up->port.icount.rx++;
172
173 if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
174 SAB82532_ISR0_FERR |
175 SAB82532_ISR0_RFO)) ||
176 unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
177 /*
178 * For statistics only
179 */
180 if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
181 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
182 SAB82532_ISR0_FERR);
183 up->port.icount.brk++;
184 /*
185 * We do the SysRQ and SAK checking
186 * here because otherwise the break
187 * may get masked by ignore_status_mask
188 * or read_status_mask.
189 */
190 if (uart_handle_break(&up->port))
191 continue;
192 } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
193 up->port.icount.parity++;
194 else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
195 up->port.icount.frame++;
196 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
197 up->port.icount.overrun++;
198
199 /*
200 * Mask off conditions which should be ingored.
201 */
202 stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
203 stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
204
205 if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
206 flag = TTY_BREAK;
207 } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
208 flag = TTY_PARITY;
209 else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
210 flag = TTY_FRAME;
211 }
212
213 if (uart_handle_sysrq_char(&up->port, ch) || !port)
214 continue;
215
216 if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
217 (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
218 tty_insert_flip_char(port, ch, flag);
219 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
220 tty_insert_flip_char(port, 0, TTY_OVERRUN);
221 }
222
223 if (saw_console_brk)
224 sun_do_break();
225
226 return port;
227 }
228
229 static void sunsab_stop_tx(struct uart_port *);
230 static void sunsab_tx_idle(struct uart_sunsab_port *);
231
transmit_chars(struct uart_sunsab_port * up,union sab82532_irq_status * stat)232 static void transmit_chars(struct uart_sunsab_port *up,
233 union sab82532_irq_status *stat)
234 {
235 struct tty_port *tport = &up->port.state->port;
236 int i;
237
238 if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
239 up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
240 writeb(up->interrupt_mask1, &up->regs->w.imr1);
241 set_bit(SAB82532_ALLS, &up->irqflags);
242 }
243
244 #if 0 /* bde@nwlink.com says this check causes problems */
245 if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
246 return;
247 #endif
248
249 if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
250 return;
251
252 set_bit(SAB82532_XPR, &up->irqflags);
253 sunsab_tx_idle(up);
254
255 if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(&up->port)) {
256 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
257 writeb(up->interrupt_mask1, &up->regs->w.imr1);
258 return;
259 }
260
261 up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
262 writeb(up->interrupt_mask1, &up->regs->w.imr1);
263 clear_bit(SAB82532_ALLS, &up->irqflags);
264
265 /* Stuff 32 bytes into Transmit FIFO. */
266 clear_bit(SAB82532_XPR, &up->irqflags);
267 for (i = 0; i < up->port.fifosize; i++) {
268 unsigned char ch;
269
270 if (!uart_fifo_get(&up->port, &ch))
271 break;
272
273 writeb(ch, &up->regs->w.xfifo[i]);
274 }
275
276 /* Issue a Transmit Frame command. */
277 sunsab_cec_wait(up);
278 writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
279
280 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
281 uart_write_wakeup(&up->port);
282
283 if (kfifo_is_empty(&tport->xmit_fifo))
284 sunsab_stop_tx(&up->port);
285 }
286
check_status(struct uart_sunsab_port * up,union sab82532_irq_status * stat)287 static void check_status(struct uart_sunsab_port *up,
288 union sab82532_irq_status *stat)
289 {
290 if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
291 uart_handle_dcd_change(&up->port,
292 !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
293
294 if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
295 uart_handle_cts_change(&up->port,
296 (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
297
298 if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
299 up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
300 up->port.icount.dsr++;
301 }
302
303 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
304 }
305
sunsab_interrupt(int irq,void * dev_id)306 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
307 {
308 struct uart_sunsab_port *up = dev_id;
309 struct tty_port *port = NULL;
310 union sab82532_irq_status status;
311 unsigned long flags;
312 unsigned char gis;
313
314 uart_port_lock_irqsave(&up->port, &flags);
315
316 status.stat = 0;
317 gis = readb(&up->regs->r.gis) >> up->gis_shift;
318 if (gis & 1)
319 status.sreg.isr0 = readb(&up->regs->r.isr0);
320 if (gis & 2)
321 status.sreg.isr1 = readb(&up->regs->r.isr1);
322
323 if (status.stat) {
324 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
325 SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
326 (status.sreg.isr1 & SAB82532_ISR1_BRK))
327 port = receive_chars(up, &status);
328 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
329 (status.sreg.isr1 & SAB82532_ISR1_CSC))
330 check_status(up, &status);
331 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
332 transmit_chars(up, &status);
333 }
334
335 uart_port_unlock_irqrestore(&up->port, flags);
336
337 if (port)
338 tty_flip_buffer_push(port);
339
340 return IRQ_HANDLED;
341 }
342
343 /* port->lock is not held. */
sunsab_tx_empty(struct uart_port * port)344 static unsigned int sunsab_tx_empty(struct uart_port *port)
345 {
346 struct uart_sunsab_port *up =
347 container_of(port, struct uart_sunsab_port, port);
348 int ret;
349
350 /* Do not need a lock for a state test like this. */
351 if (test_bit(SAB82532_ALLS, &up->irqflags))
352 ret = TIOCSER_TEMT;
353 else
354 ret = 0;
355
356 return ret;
357 }
358
359 /* port->lock held by caller. */
sunsab_set_mctrl(struct uart_port * port,unsigned int mctrl)360 static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
361 {
362 struct uart_sunsab_port *up =
363 container_of(port, struct uart_sunsab_port, port);
364
365 if (mctrl & TIOCM_RTS) {
366 up->cached_mode &= ~SAB82532_MODE_FRTS;
367 up->cached_mode |= SAB82532_MODE_RTS;
368 } else {
369 up->cached_mode |= (SAB82532_MODE_FRTS |
370 SAB82532_MODE_RTS);
371 }
372 if (mctrl & TIOCM_DTR) {
373 up->cached_pvr &= ~(up->pvr_dtr_bit);
374 } else {
375 up->cached_pvr |= up->pvr_dtr_bit;
376 }
377
378 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
379 if (test_bit(SAB82532_XPR, &up->irqflags))
380 sunsab_tx_idle(up);
381 }
382
383 /* port->lock is held by caller and interrupts are disabled. */
sunsab_get_mctrl(struct uart_port * port)384 static unsigned int sunsab_get_mctrl(struct uart_port *port)
385 {
386 struct uart_sunsab_port *up =
387 container_of(port, struct uart_sunsab_port, port);
388 unsigned char val;
389 unsigned int result;
390
391 result = 0;
392
393 val = readb(&up->regs->r.pvr);
394 result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
395
396 val = readb(&up->regs->r.vstr);
397 result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
398
399 val = readb(&up->regs->r.star);
400 result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
401
402 return result;
403 }
404
405 /* port->lock held by caller. */
sunsab_stop_tx(struct uart_port * port)406 static void sunsab_stop_tx(struct uart_port *port)
407 {
408 struct uart_sunsab_port *up =
409 container_of(port, struct uart_sunsab_port, port);
410
411 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
412 writeb(up->interrupt_mask1, &up->regs->w.imr1);
413 }
414
415 /* port->lock held by caller. */
sunsab_tx_idle(struct uart_sunsab_port * up)416 static void sunsab_tx_idle(struct uart_sunsab_port *up)
417 {
418 if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
419 u8 tmp;
420
421 clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
422 writeb(up->cached_mode, &up->regs->rw.mode);
423 writeb(up->cached_pvr, &up->regs->rw.pvr);
424 writeb(up->cached_dafo, &up->regs->w.dafo);
425
426 writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
427 tmp = readb(&up->regs->rw.ccr2);
428 tmp &= ~0xc0;
429 tmp |= (up->cached_ebrg >> 2) & 0xc0;
430 writeb(tmp, &up->regs->rw.ccr2);
431 }
432 }
433
434 /* port->lock held by caller. */
sunsab_start_tx(struct uart_port * port)435 static void sunsab_start_tx(struct uart_port *port)
436 {
437 struct uart_sunsab_port *up =
438 container_of(port, struct uart_sunsab_port, port);
439 struct tty_port *tport = &up->port.state->port;
440 int i;
441
442 if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
443 return;
444
445 up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
446 writeb(up->interrupt_mask1, &up->regs->w.imr1);
447
448 if (!test_bit(SAB82532_XPR, &up->irqflags))
449 return;
450
451 clear_bit(SAB82532_ALLS, &up->irqflags);
452 clear_bit(SAB82532_XPR, &up->irqflags);
453
454 for (i = 0; i < up->port.fifosize; i++) {
455 unsigned char ch;
456
457 if (!uart_fifo_get(&up->port, &ch))
458 break;
459
460 writeb(ch, &up->regs->w.xfifo[i]);
461 }
462
463 /* Issue a Transmit Frame command. */
464 sunsab_cec_wait(up);
465 writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
466 }
467
468 /* port->lock is not held. */
sunsab_send_xchar(struct uart_port * port,char ch)469 static void sunsab_send_xchar(struct uart_port *port, char ch)
470 {
471 struct uart_sunsab_port *up =
472 container_of(port, struct uart_sunsab_port, port);
473 unsigned long flags;
474
475 if (ch == __DISABLED_CHAR)
476 return;
477
478 uart_port_lock_irqsave(&up->port, &flags);
479
480 sunsab_tec_wait(up);
481 writeb(ch, &up->regs->w.tic);
482
483 uart_port_unlock_irqrestore(&up->port, flags);
484 }
485
486 /* port->lock held by caller. */
sunsab_stop_rx(struct uart_port * port)487 static void sunsab_stop_rx(struct uart_port *port)
488 {
489 struct uart_sunsab_port *up =
490 container_of(port, struct uart_sunsab_port, port);
491
492 up->interrupt_mask0 |= SAB82532_IMR0_TCD;
493 writeb(up->interrupt_mask1, &up->regs->w.imr0);
494 }
495
496 /* port->lock is not held. */
sunsab_break_ctl(struct uart_port * port,int break_state)497 static void sunsab_break_ctl(struct uart_port *port, int break_state)
498 {
499 struct uart_sunsab_port *up =
500 container_of(port, struct uart_sunsab_port, port);
501 unsigned long flags;
502 unsigned char val;
503
504 uart_port_lock_irqsave(&up->port, &flags);
505
506 val = up->cached_dafo;
507 if (break_state)
508 val |= SAB82532_DAFO_XBRK;
509 else
510 val &= ~SAB82532_DAFO_XBRK;
511 up->cached_dafo = val;
512
513 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
514 if (test_bit(SAB82532_XPR, &up->irqflags))
515 sunsab_tx_idle(up);
516
517 uart_port_unlock_irqrestore(&up->port, flags);
518 }
519
520 /* port->lock is not held. */
sunsab_startup(struct uart_port * port)521 static int sunsab_startup(struct uart_port *port)
522 {
523 struct uart_sunsab_port *up =
524 container_of(port, struct uart_sunsab_port, port);
525 unsigned long flags;
526 unsigned char tmp;
527 int err = request_irq(up->port.irq, sunsab_interrupt,
528 IRQF_SHARED, "sab", up);
529 if (err)
530 return err;
531
532 uart_port_lock_irqsave(&up->port, &flags);
533
534 /*
535 * Wait for any commands or immediate characters
536 */
537 sunsab_cec_wait(up);
538 sunsab_tec_wait(up);
539
540 /*
541 * Clear the FIFO buffers.
542 */
543 writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
544 sunsab_cec_wait(up);
545 writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
546
547 /*
548 * Clear the interrupt registers.
549 */
550 (void) readb(&up->regs->r.isr0);
551 (void) readb(&up->regs->r.isr1);
552
553 /*
554 * Now, initialize the UART
555 */
556 writeb(0, &up->regs->w.ccr0); /* power-down */
557 writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
558 SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
559 writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
560 writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
561 SAB82532_CCR2_TOE, &up->regs->w.ccr2);
562 writeb(0, &up->regs->w.ccr3);
563 writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
564 up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
565 SAB82532_MODE_RAC);
566 writeb(up->cached_mode, &up->regs->w.mode);
567 writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
568
569 tmp = readb(&up->regs->rw.ccr0);
570 tmp |= SAB82532_CCR0_PU; /* power-up */
571 writeb(tmp, &up->regs->rw.ccr0);
572
573 /*
574 * Finally, enable interrupts
575 */
576 up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
577 SAB82532_IMR0_PLLA);
578 writeb(up->interrupt_mask0, &up->regs->w.imr0);
579 up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
580 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
581 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
582 SAB82532_IMR1_XPR);
583 writeb(up->interrupt_mask1, &up->regs->w.imr1);
584 set_bit(SAB82532_ALLS, &up->irqflags);
585 set_bit(SAB82532_XPR, &up->irqflags);
586
587 uart_port_unlock_irqrestore(&up->port, flags);
588
589 return 0;
590 }
591
592 /* port->lock is not held. */
sunsab_shutdown(struct uart_port * port)593 static void sunsab_shutdown(struct uart_port *port)
594 {
595 struct uart_sunsab_port *up =
596 container_of(port, struct uart_sunsab_port, port);
597 unsigned long flags;
598
599 uart_port_lock_irqsave(&up->port, &flags);
600
601 /* Disable Interrupts */
602 up->interrupt_mask0 = 0xff;
603 writeb(up->interrupt_mask0, &up->regs->w.imr0);
604 up->interrupt_mask1 = 0xff;
605 writeb(up->interrupt_mask1, &up->regs->w.imr1);
606
607 /* Disable break condition */
608 up->cached_dafo = readb(&up->regs->rw.dafo);
609 up->cached_dafo &= ~SAB82532_DAFO_XBRK;
610 writeb(up->cached_dafo, &up->regs->rw.dafo);
611
612 /* Disable Receiver */
613 up->cached_mode &= ~SAB82532_MODE_RAC;
614 writeb(up->cached_mode, &up->regs->rw.mode);
615
616 /*
617 * XXX FIXME
618 *
619 * If the chip is powered down here the system hangs/crashes during
620 * reboot or shutdown. This needs to be investigated further,
621 * similar behaviour occurs in 2.4 when the driver is configured
622 * as a module only. One hint may be that data is sometimes
623 * transmitted at 9600 baud during shutdown (regardless of the
624 * speed the chip was configured for when the port was open).
625 */
626 #if 0
627 /* Power Down */
628 tmp = readb(&up->regs->rw.ccr0);
629 tmp &= ~SAB82532_CCR0_PU;
630 writeb(tmp, &up->regs->rw.ccr0);
631 #endif
632
633 uart_port_unlock_irqrestore(&up->port, flags);
634 free_irq(up->port.irq, up);
635 }
636
637 /*
638 * This is used to figure out the divisor speeds.
639 *
640 * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
641 *
642 * with 0 <= N < 64 and 0 <= M < 16
643 */
644
calc_ebrg(int baud,int * n_ret,int * m_ret)645 static void calc_ebrg(int baud, int *n_ret, int *m_ret)
646 {
647 int n, m;
648
649 if (baud == 0) {
650 *n_ret = 0;
651 *m_ret = 0;
652 return;
653 }
654
655 /*
656 * We scale numbers by 10 so that we get better accuracy
657 * without having to use floating point. Here we increment m
658 * until n is within the valid range.
659 */
660 n = (SAB_BASE_BAUD * 10) / baud;
661 m = 0;
662 while (n >= 640) {
663 n = n / 2;
664 m++;
665 }
666 n = (n+5) / 10;
667 /*
668 * We try very hard to avoid speeds with M == 0 since they may
669 * not work correctly for XTAL frequences above 10 MHz.
670 */
671 if ((m == 0) && ((n & 1) == 0)) {
672 n = n / 2;
673 m++;
674 }
675 *n_ret = n - 1;
676 *m_ret = m;
677 }
678
679 /* Internal routine, port->lock is held and local interrupts are disabled. */
sunsab_convert_to_sab(struct uart_sunsab_port * up,unsigned int cflag,unsigned int iflag,unsigned int baud,unsigned int quot)680 static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
681 unsigned int iflag, unsigned int baud,
682 unsigned int quot)
683 {
684 unsigned char dafo;
685 int n, m;
686
687 /* Byte size and parity */
688 switch (cflag & CSIZE) {
689 case CS5: dafo = SAB82532_DAFO_CHL5; break;
690 case CS6: dafo = SAB82532_DAFO_CHL6; break;
691 case CS7: dafo = SAB82532_DAFO_CHL7; break;
692 case CS8: dafo = SAB82532_DAFO_CHL8; break;
693 /* Never happens, but GCC is too dumb to figure it out */
694 default: dafo = SAB82532_DAFO_CHL5; break;
695 }
696
697 if (cflag & CSTOPB)
698 dafo |= SAB82532_DAFO_STOP;
699
700 if (cflag & PARENB)
701 dafo |= SAB82532_DAFO_PARE;
702
703 if (cflag & PARODD) {
704 dafo |= SAB82532_DAFO_PAR_ODD;
705 } else {
706 dafo |= SAB82532_DAFO_PAR_EVEN;
707 }
708 up->cached_dafo = dafo;
709
710 calc_ebrg(baud, &n, &m);
711
712 up->cached_ebrg = n | (m << 6);
713
714 up->tec_timeout = (10 * 1000000) / baud;
715 up->cec_timeout = up->tec_timeout >> 2;
716
717 /* CTS flow control flags */
718 /* We encode read_status_mask and ignore_status_mask like so:
719 *
720 * ---------------------
721 * | ... | ISR1 | ISR0 |
722 * ---------------------
723 * .. 15 8 7 0
724 */
725
726 up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
727 SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
728 SAB82532_ISR0_CDSC);
729 up->port.read_status_mask |= (SAB82532_ISR1_CSC |
730 SAB82532_ISR1_ALLS |
731 SAB82532_ISR1_XPR) << 8;
732 if (iflag & INPCK)
733 up->port.read_status_mask |= (SAB82532_ISR0_PERR |
734 SAB82532_ISR0_FERR);
735 if (iflag & (IGNBRK | BRKINT | PARMRK))
736 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
737
738 /*
739 * Characteres to ignore
740 */
741 up->port.ignore_status_mask = 0;
742 if (iflag & IGNPAR)
743 up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
744 SAB82532_ISR0_FERR);
745 if (iflag & IGNBRK) {
746 up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
747 /*
748 * If we're ignoring parity and break indicators,
749 * ignore overruns too (for real raw support).
750 */
751 if (iflag & IGNPAR)
752 up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
753 }
754
755 /*
756 * ignore all characters if CREAD is not set
757 */
758 if ((cflag & CREAD) == 0)
759 up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
760 SAB82532_ISR0_TCD);
761
762 uart_update_timeout(&up->port, cflag,
763 (up->port.uartclk / (16 * quot)));
764
765 /* Now schedule a register update when the chip's
766 * transmitter is idle.
767 */
768 up->cached_mode |= SAB82532_MODE_RAC;
769 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
770 if (test_bit(SAB82532_XPR, &up->irqflags))
771 sunsab_tx_idle(up);
772 }
773
774 /* port->lock is not held. */
sunsab_set_termios(struct uart_port * port,struct ktermios * termios,const struct ktermios * old)775 static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
776 const struct ktermios *old)
777 {
778 struct uart_sunsab_port *up =
779 container_of(port, struct uart_sunsab_port, port);
780 unsigned long flags;
781 unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
782 unsigned int quot = uart_get_divisor(port, baud);
783
784 uart_port_lock_irqsave(&up->port, &flags);
785 sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
786 uart_port_unlock_irqrestore(&up->port, flags);
787 }
788
sunsab_type(struct uart_port * port)789 static const char *sunsab_type(struct uart_port *port)
790 {
791 struct uart_sunsab_port *up = (void *)port;
792 static char buf[36];
793
794 sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
795 return buf;
796 }
797
sunsab_release_port(struct uart_port * port)798 static void sunsab_release_port(struct uart_port *port)
799 {
800 }
801
sunsab_request_port(struct uart_port * port)802 static int sunsab_request_port(struct uart_port *port)
803 {
804 return 0;
805 }
806
sunsab_config_port(struct uart_port * port,int flags)807 static void sunsab_config_port(struct uart_port *port, int flags)
808 {
809 }
810
sunsab_verify_port(struct uart_port * port,struct serial_struct * ser)811 static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
812 {
813 return -EINVAL;
814 }
815
816 static const struct uart_ops sunsab_pops = {
817 .tx_empty = sunsab_tx_empty,
818 .set_mctrl = sunsab_set_mctrl,
819 .get_mctrl = sunsab_get_mctrl,
820 .stop_tx = sunsab_stop_tx,
821 .start_tx = sunsab_start_tx,
822 .send_xchar = sunsab_send_xchar,
823 .stop_rx = sunsab_stop_rx,
824 .break_ctl = sunsab_break_ctl,
825 .startup = sunsab_startup,
826 .shutdown = sunsab_shutdown,
827 .set_termios = sunsab_set_termios,
828 .type = sunsab_type,
829 .release_port = sunsab_release_port,
830 .request_port = sunsab_request_port,
831 .config_port = sunsab_config_port,
832 .verify_port = sunsab_verify_port,
833 };
834
835 static struct uart_driver sunsab_reg = {
836 .owner = THIS_MODULE,
837 .driver_name = "sunsab",
838 .dev_name = "ttyS",
839 .major = TTY_MAJOR,
840 };
841
842 static struct uart_sunsab_port *sunsab_ports;
843
844 #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
845
sunsab_console_putchar(struct uart_port * port,unsigned char c)846 static void sunsab_console_putchar(struct uart_port *port, unsigned char c)
847 {
848 struct uart_sunsab_port *up =
849 container_of(port, struct uart_sunsab_port, port);
850
851 sunsab_tec_wait(up);
852 writeb(c, &up->regs->w.tic);
853 }
854
sunsab_console_write(struct console * con,const char * s,unsigned n)855 static void sunsab_console_write(struct console *con, const char *s, unsigned n)
856 {
857 struct uart_sunsab_port *up = &sunsab_ports[con->index];
858 unsigned long flags;
859 int locked = 1;
860
861 if (up->port.sysrq || oops_in_progress)
862 locked = uart_port_trylock_irqsave(&up->port, &flags);
863 else
864 uart_port_lock_irqsave(&up->port, &flags);
865
866 uart_console_write(&up->port, s, n, sunsab_console_putchar);
867 sunsab_tec_wait(up);
868
869 if (locked)
870 uart_port_unlock_irqrestore(&up->port, flags);
871 }
872
sunsab_console_setup(struct console * con,char * options)873 static int sunsab_console_setup(struct console *con, char *options)
874 {
875 struct uart_sunsab_port *up = &sunsab_ports[con->index];
876 unsigned long flags;
877 unsigned int baud, quot;
878
879 /*
880 * The console framework calls us for each and every port
881 * registered. Defer the console setup until the requested
882 * port has been properly discovered. A bit of a hack,
883 * though...
884 */
885 if (up->port.type != PORT_SUNSAB)
886 return -EINVAL;
887
888 printk("Console: ttyS%d (SAB82532)\n",
889 (sunsab_reg.minor - 64) + con->index);
890
891 sunserial_console_termios(con, up->port.dev->of_node);
892
893 switch (con->cflag & CBAUD) {
894 case B150: baud = 150; break;
895 case B300: baud = 300; break;
896 case B600: baud = 600; break;
897 case B1200: baud = 1200; break;
898 case B2400: baud = 2400; break;
899 case B4800: baud = 4800; break;
900 default: case B9600: baud = 9600; break;
901 case B19200: baud = 19200; break;
902 case B38400: baud = 38400; break;
903 case B57600: baud = 57600; break;
904 case B115200: baud = 115200; break;
905 case B230400: baud = 230400; break;
906 case B460800: baud = 460800; break;
907 }
908
909 /*
910 * Temporary fix.
911 */
912 spin_lock_init(&up->port.lock);
913
914 /*
915 * Initialize the hardware
916 */
917 sunsab_startup(&up->port);
918
919 uart_port_lock_irqsave(&up->port, &flags);
920
921 /*
922 * Finally, enable interrupts
923 */
924 up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
925 SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
926 writeb(up->interrupt_mask0, &up->regs->w.imr0);
927 up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
928 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
929 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
930 SAB82532_IMR1_XPR;
931 writeb(up->interrupt_mask1, &up->regs->w.imr1);
932
933 quot = uart_get_divisor(&up->port, baud);
934 sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
935 sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
936
937 uart_port_unlock_irqrestore(&up->port, flags);
938
939 return 0;
940 }
941
942 static struct console sunsab_console = {
943 .name = "ttyS",
944 .write = sunsab_console_write,
945 .device = uart_console_device,
946 .setup = sunsab_console_setup,
947 .flags = CON_PRINTBUFFER,
948 .index = -1,
949 .data = &sunsab_reg,
950 };
951
SUNSAB_CONSOLE(void)952 static inline struct console *SUNSAB_CONSOLE(void)
953 {
954 return &sunsab_console;
955 }
956 #else
957 #define SUNSAB_CONSOLE() (NULL)
958 #define sunsab_console_init() do { } while (0)
959 #endif
960
sunsab_init_one(struct uart_sunsab_port * up,struct platform_device * op,unsigned long offset,int line)961 static int sunsab_init_one(struct uart_sunsab_port *up,
962 struct platform_device *op,
963 unsigned long offset,
964 int line)
965 {
966 up->port.line = line;
967 up->port.dev = &op->dev;
968
969 up->port.mapbase = op->resource[0].start + offset;
970 up->port.membase = of_ioremap(&op->resource[0], offset,
971 sizeof(union sab82532_async_regs),
972 "sab");
973 if (!up->port.membase)
974 return -ENOMEM;
975 up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
976
977 up->port.irq = op->archdata.irqs[0];
978
979 up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
980 up->port.iotype = UPIO_MEM;
981 up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSAB_CONSOLE);
982
983 writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
984
985 up->port.ops = &sunsab_pops;
986 up->port.type = PORT_SUNSAB;
987 up->port.uartclk = SAB_BASE_BAUD;
988
989 up->type = readb(&up->regs->r.vstr) & 0x0f;
990 writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
991 writeb(0xff, &up->regs->w.pim);
992 if ((up->port.line & 0x1) == 0) {
993 up->pvr_dsr_bit = (1 << 0);
994 up->pvr_dtr_bit = (1 << 1);
995 up->gis_shift = 2;
996 } else {
997 up->pvr_dsr_bit = (1 << 3);
998 up->pvr_dtr_bit = (1 << 2);
999 up->gis_shift = 0;
1000 }
1001 up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
1002 writeb(up->cached_pvr, &up->regs->w.pvr);
1003 up->cached_mode = readb(&up->regs->rw.mode);
1004 up->cached_mode |= SAB82532_MODE_FRTS;
1005 writeb(up->cached_mode, &up->regs->rw.mode);
1006 up->cached_mode |= SAB82532_MODE_RTS;
1007 writeb(up->cached_mode, &up->regs->rw.mode);
1008
1009 up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
1010 up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
1011
1012 return 0;
1013 }
1014
sab_probe(struct platform_device * op)1015 static int sab_probe(struct platform_device *op)
1016 {
1017 static int inst;
1018 struct uart_sunsab_port *up;
1019 int err;
1020
1021 up = &sunsab_ports[inst * 2];
1022
1023 err = sunsab_init_one(&up[0], op,
1024 0,
1025 (inst * 2) + 0);
1026 if (err)
1027 goto out;
1028
1029 err = sunsab_init_one(&up[1], op,
1030 sizeof(union sab82532_async_regs),
1031 (inst * 2) + 1);
1032 if (err)
1033 goto out1;
1034
1035 sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
1036 &sunsab_reg, up[0].port.line,
1037 false);
1038
1039 sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
1040 &sunsab_reg, up[1].port.line,
1041 false);
1042
1043 err = uart_add_one_port(&sunsab_reg, &up[0].port);
1044 if (err)
1045 goto out2;
1046
1047 err = uart_add_one_port(&sunsab_reg, &up[1].port);
1048 if (err)
1049 goto out3;
1050
1051 platform_set_drvdata(op, &up[0]);
1052
1053 inst++;
1054
1055 return 0;
1056
1057 out3:
1058 uart_remove_one_port(&sunsab_reg, &up[0].port);
1059 out2:
1060 of_iounmap(&op->resource[0],
1061 up[1].port.membase,
1062 sizeof(union sab82532_async_regs));
1063 out1:
1064 of_iounmap(&op->resource[0],
1065 up[0].port.membase,
1066 sizeof(union sab82532_async_regs));
1067 out:
1068 return err;
1069 }
1070
sab_remove(struct platform_device * op)1071 static void sab_remove(struct platform_device *op)
1072 {
1073 struct uart_sunsab_port *up = platform_get_drvdata(op);
1074
1075 uart_remove_one_port(&sunsab_reg, &up[1].port);
1076 uart_remove_one_port(&sunsab_reg, &up[0].port);
1077 of_iounmap(&op->resource[0],
1078 up[1].port.membase,
1079 sizeof(union sab82532_async_regs));
1080 of_iounmap(&op->resource[0],
1081 up[0].port.membase,
1082 sizeof(union sab82532_async_regs));
1083 }
1084
1085 static const struct of_device_id sab_match[] = {
1086 {
1087 .name = "se",
1088 },
1089 {
1090 .name = "serial",
1091 .compatible = "sab82532",
1092 },
1093 {},
1094 };
1095 MODULE_DEVICE_TABLE(of, sab_match);
1096
1097 static struct platform_driver sab_driver = {
1098 .driver = {
1099 .name = "sab",
1100 .of_match_table = sab_match,
1101 },
1102 .probe = sab_probe,
1103 .remove = sab_remove,
1104 };
1105
sunsab_init(void)1106 static int __init sunsab_init(void)
1107 {
1108 struct device_node *dp;
1109 int err;
1110 int num_channels = 0;
1111
1112 for_each_node_by_name(dp, "se")
1113 num_channels += 2;
1114 for_each_node_by_name(dp, "serial") {
1115 if (of_device_is_compatible(dp, "sab82532"))
1116 num_channels += 2;
1117 }
1118
1119 if (num_channels) {
1120 sunsab_ports = kcalloc(num_channels,
1121 sizeof(struct uart_sunsab_port),
1122 GFP_KERNEL);
1123 if (!sunsab_ports)
1124 return -ENOMEM;
1125
1126 err = sunserial_register_minors(&sunsab_reg, num_channels);
1127 if (err) {
1128 kfree(sunsab_ports);
1129 sunsab_ports = NULL;
1130
1131 return err;
1132 }
1133 }
1134
1135 err = platform_driver_register(&sab_driver);
1136 if (err) {
1137 kfree(sunsab_ports);
1138 sunsab_ports = NULL;
1139 }
1140
1141 return err;
1142 }
1143
sunsab_exit(void)1144 static void __exit sunsab_exit(void)
1145 {
1146 platform_driver_unregister(&sab_driver);
1147 if (sunsab_reg.nr) {
1148 sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
1149 }
1150
1151 kfree(sunsab_ports);
1152 sunsab_ports = NULL;
1153 }
1154
1155 module_init(sunsab_init);
1156 module_exit(sunsab_exit);
1157
1158 MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
1159 MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
1160 MODULE_LICENSE("GPL");
1161