1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/video/sstfb.c -- voodoo graphics frame buffer
4 *
5 * Copyright (c) 2000-2002 Ghozlane Toumi <gtoumi@laposte.net>
6 *
7 * Created 15 Jan 2000 by Ghozlane Toumi
8 *
9 * Contributions (and many thanks) :
10 *
11 * 03/2001 James Simmons <jsimmons@infradead.org>
12 * 04/2001 Paul Mundt <lethal@chaoticdreams.org>
13 * 05/2001 Urs Ganse <ursg@uni.de>
14 * (initial work on voodoo2 port, interlace)
15 * 09/2002 Helge Deller <deller@gmx.de>
16 * (enable driver on big-endian machines (hppa), ioctl fixes)
17 * 12/2002 Helge Deller <deller@gmx.de>
18 * (port driver to new frambuffer infrastructure)
19 * 01/2003 Helge Deller <deller@gmx.de>
20 * (initial work on fb hardware acceleration for voodoo2)
21 * 08/2006 Alan Cox <alan@redhat.com>
22 * Remove never finished and bogus 24/32bit support
23 * Clean up macro abuse
24 * Minor tidying for format.
25 * 12/2006 Helge Deller <deller@gmx.de>
26 * add /sys/class/graphics/fbX/vgapass sysfs-interface
27 * add module option "mode_option" to set initial screen mode
28 * use fbdev default videomode database
29 * remove debug functions from ioctl
30 */
31
32 /*
33 * The voodoo1 has the following memory mapped address space:
34 * 0x000000 - 0x3fffff : registers (4MB)
35 * 0x400000 - 0x7fffff : linear frame buffer (4MB)
36 * 0x800000 - 0xffffff : texture memory (8MB)
37 */
38
39 /*
40 * misc notes, TODOs, toASKs, and deep thoughts
41
42 -TODO: at one time or another test that the mode is acceptable by the monitor
43 -ASK: Can I choose different ordering for the color bitfields (rgba argb ...)
44 which one should i use ? is there any preferred one ? It seems ARGB is
45 the one ...
46 -TODO: in set_var check the validity of timings (hsync vsync)...
47 -TODO: check and recheck the use of sst_wait_idle : we don't flush the fifo via
48 a nop command. so it's ok as long as the commands we pass don't go
49 through the fifo. warning: issuing a nop command seems to need pci_fifo
50 -FIXME: in case of failure in the init sequence, be sure we return to a safe
51 state.
52 - FIXME: Use accelerator for 2D scroll
53 -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
54 */
55
56 /*
57 * debug info
58 * SST_DEBUG : enable debugging
59 * SST_DEBUG_REG : debug registers
60 * 0 : no debug
61 * 1 : dac calls, [un]set_bits, FbiInit
62 * 2 : insane debug level (log every register read/write)
63 * SST_DEBUG_FUNC : functions
64 * 0 : no debug
65 * 1 : function call / debug ioctl
66 * 2 : variables
67 * 3 : flood . you don't want to do that. trust me.
68 * SST_DEBUG_VAR : debug display/var structs
69 * 0 : no debug
70 * 1 : dumps display, fb_var
71 *
72 * sstfb specific ioctls:
73 * toggle vga (0x46db) : toggle vga_pass_through
74 */
75
76 #undef SST_DEBUG
77
78
79 /*
80 * Includes
81 */
82
83 #include <linux/aperture.h>
84 #include <linux/string.h>
85 #include <linux/kernel.h>
86 #include <linux/module.h>
87 #include <linux/fb.h>
88 #include <linux/pci.h>
89 #include <linux/delay.h>
90 #include <linux/init.h>
91 #include <asm/io.h>
92 #include <linux/uaccess.h>
93 #include <video/sstfb.h>
94
95
96 /* initialized by setup */
97
98 static bool vgapass; /* enable VGA passthrough cable */
99 static int mem; /* mem size in MB, 0 = autodetect */
100 static bool clipping = 1; /* use clipping (slower, safer) */
101 static int gfxclk; /* force FBI freq in Mhz . Dangerous */
102 static bool slowpci; /* slow PCI settings */
103
104 /*
105 Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
106 */
107 #define DEFAULT_VIDEO_MODE "640x480@60"
108
109 static char *mode_option = DEFAULT_VIDEO_MODE;
110
111 enum {
112 ID_VOODOO1 = 0,
113 ID_VOODOO2 = 1,
114 };
115
116 #define IS_VOODOO2(par) ((par)->type == ID_VOODOO2)
117
118 static struct sst_spec voodoo_spec[] = {
119 { .name = "Voodoo Graphics", .default_gfx_clock = 50000, .max_gfxclk = 60 },
120 { .name = "Voodoo2", .default_gfx_clock = 75000, .max_gfxclk = 85 },
121 };
122
123
124 /*
125 * debug functions
126 */
127
128 #if (SST_DEBUG_REG > 0)
sst_dbg_print_read_reg(u32 reg,u32 val)129 static void sst_dbg_print_read_reg(u32 reg, u32 val) {
130 const char *regname;
131 switch (reg) {
132 case FBIINIT0: regname = "FbiInit0"; break;
133 case FBIINIT1: regname = "FbiInit1"; break;
134 case FBIINIT2: regname = "FbiInit2"; break;
135 case FBIINIT3: regname = "FbiInit3"; break;
136 case FBIINIT4: regname = "FbiInit4"; break;
137 case FBIINIT5: regname = "FbiInit5"; break;
138 case FBIINIT6: regname = "FbiInit6"; break;
139 default: regname = NULL; break;
140 }
141 if (regname == NULL)
142 r_ddprintk("sst_read(%#x): %#x\n", reg, val);
143 else
144 r_dprintk(" sst_read(%s): %#x\n", regname, val);
145 }
146
sst_dbg_print_write_reg(u32 reg,u32 val)147 static void sst_dbg_print_write_reg(u32 reg, u32 val) {
148 const char *regname;
149 switch (reg) {
150 case FBIINIT0: regname = "FbiInit0"; break;
151 case FBIINIT1: regname = "FbiInit1"; break;
152 case FBIINIT2: regname = "FbiInit2"; break;
153 case FBIINIT3: regname = "FbiInit3"; break;
154 case FBIINIT4: regname = "FbiInit4"; break;
155 case FBIINIT5: regname = "FbiInit5"; break;
156 case FBIINIT6: regname = "FbiInit6"; break;
157 default: regname = NULL; break;
158 }
159 if (regname == NULL)
160 r_ddprintk("sst_write(%#x, %#x)\n", reg, val);
161 else
162 r_dprintk(" sst_write(%s, %#x)\n", regname, val);
163 }
164 #else /* (SST_DEBUG_REG > 0) */
165 # define sst_dbg_print_read_reg(reg, val) do {} while(0)
166 # define sst_dbg_print_write_reg(reg, val) do {} while(0)
167 #endif /* (SST_DEBUG_REG > 0) */
168
169 /*
170 * hardware access functions
171 */
172
173 /* register access */
174 #define sst_read(reg) __sst_read(par->mmio_vbase, reg)
175 #define sst_write(reg,val) __sst_write(par->mmio_vbase, reg, val)
176 #define sst_set_bits(reg,val) __sst_set_bits(par->mmio_vbase, reg, val)
177 #define sst_unset_bits(reg,val) __sst_unset_bits(par->mmio_vbase, reg, val)
178 #define sst_dac_read(reg) __sst_dac_read(par->mmio_vbase, reg)
179 #define sst_dac_write(reg,val) __sst_dac_write(par->mmio_vbase, reg, val)
180 #define dac_i_read(reg) __dac_i_read(par->mmio_vbase, reg)
181 #define dac_i_write(reg,val) __dac_i_write(par->mmio_vbase, reg, val)
182
__sst_read(u8 __iomem * vbase,u32 reg)183 static inline u32 __sst_read(u8 __iomem *vbase, u32 reg)
184 {
185 u32 ret = readl(vbase + reg);
186 sst_dbg_print_read_reg(reg, ret);
187 return ret;
188 }
189
__sst_write(u8 __iomem * vbase,u32 reg,u32 val)190 static inline void __sst_write(u8 __iomem *vbase, u32 reg, u32 val)
191 {
192 sst_dbg_print_write_reg(reg, val);
193 writel(val, vbase + reg);
194 }
195
__sst_set_bits(u8 __iomem * vbase,u32 reg,u32 val)196 static inline void __sst_set_bits(u8 __iomem *vbase, u32 reg, u32 val)
197 {
198 r_dprintk("sst_set_bits(%#x, %#x)\n", reg, val);
199 __sst_write(vbase, reg, __sst_read(vbase, reg) | val);
200 }
201
__sst_unset_bits(u8 __iomem * vbase,u32 reg,u32 val)202 static inline void __sst_unset_bits(u8 __iomem *vbase, u32 reg, u32 val)
203 {
204 r_dprintk("sst_unset_bits(%#x, %#x)\n", reg, val);
205 __sst_write(vbase, reg, __sst_read(vbase, reg) & ~val);
206 }
207
208 /*
209 * wait for the fbi chip. ASK: what happens if the fbi is stuck ?
210 *
211 * the FBI is supposed to be ready if we receive 5 time
212 * in a row a "idle" answer to our requests
213 */
214
215 #define sst_wait_idle() __sst_wait_idle(par->mmio_vbase)
216
__sst_wait_idle(u8 __iomem * vbase)217 static int __sst_wait_idle(u8 __iomem *vbase)
218 {
219 int count = 0;
220
221 /* if (doFBINOP) __sst_write(vbase, NOPCMD, 0); */
222
223 while(1) {
224 if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) {
225 f_dddprintk("status: busy\n");
226 /* FIXME basically, this is a busy wait. maybe not that good. oh well;
227 * this is a small loop after all.
228 * Or maybe we should use mdelay() or udelay() here instead ? */
229 count = 0;
230 } else {
231 count++;
232 f_dddprintk("status: idle(%d)\n", count);
233 }
234 if (count >= 5) return 1;
235 /* XXX do something to avoid hanging the machine if the voodoo is out */
236 }
237 }
238
239
240 /* dac access */
241 /* dac_read should be remaped to FbiInit2 (via the pci reg init_enable) */
__sst_dac_read(u8 __iomem * vbase,u8 reg)242 static u8 __sst_dac_read(u8 __iomem *vbase, u8 reg)
243 {
244 u8 ret;
245
246 reg &= 0x07;
247 __sst_write(vbase, DAC_DATA, ((u32)reg << 8) | DAC_READ_CMD );
248 __sst_wait_idle(vbase);
249 /* udelay(10); */
250 ret = __sst_read(vbase, DAC_READ) & 0xff;
251 r_dprintk("sst_dac_read(%#x): %#x\n", reg, ret);
252
253 return ret;
254 }
255
__sst_dac_write(u8 __iomem * vbase,u8 reg,u8 val)256 static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val)
257 {
258 r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val);
259 reg &= 0x07;
260 __sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val);
261 __sst_wait_idle(vbase);
262 }
263
264 /* indexed access to ti/att dacs */
__dac_i_read(u8 __iomem * vbase,u8 reg)265 static u32 __dac_i_read(u8 __iomem *vbase, u8 reg)
266 {
267 u32 ret;
268
269 __sst_dac_write(vbase, DACREG_ADDR_I, reg);
270 ret = __sst_dac_read(vbase, DACREG_DATA_I);
271 r_dprintk("sst_dac_read_i(%#x): %#x\n", reg, ret);
272 return ret;
273 }
__dac_i_write(u8 __iomem * vbase,u8 reg,u8 val)274 static void __dac_i_write(u8 __iomem *vbase, u8 reg,u8 val)
275 {
276 r_dprintk("sst_dac_write_i(%#x, %#x)\n", reg, val);
277 __sst_dac_write(vbase, DACREG_ADDR_I, reg);
278 __sst_dac_write(vbase, DACREG_DATA_I, val);
279 }
280
281 /* compute the m,n,p , returns the real freq
282 * (ics datasheet : N <-> N1 , P <-> N2)
283 *
284 * Fout= Fref * (M+2)/( 2^P * (N+2))
285 * we try to get close to the asked freq
286 * with P as high, and M as low as possible
287 * range:
288 * ti/att : 0 <= M <= 255; 0 <= P <= 3; 0<= N <= 63
289 * ics : 1 <= M <= 127; 0 <= P <= 3; 1<= N <= 31
290 * we'll use the lowest limitation, should be precise enouth
291 */
sst_calc_pll(const int freq,int * freq_out,struct pll_timing * t)292 static int sst_calc_pll(const int freq, int *freq_out, struct pll_timing *t)
293 {
294 int m, m2, n, p, best_err, fout;
295 int best_n = -1;
296 int best_m = -1;
297
298 best_err = freq;
299 p = 3;
300 /* f * 2^P = vco should be less than VCOmax ~ 250 MHz for ics*/
301 while (((1 << p) * freq > VCO_MAX) && (p >= 0))
302 p--;
303 if (p == -1)
304 return -EINVAL;
305 for (n = 1; n < 32; n++) {
306 /* calc 2 * m so we can round it later*/
307 m2 = (2 * freq * (1 << p) * (n + 2) ) / DAC_FREF - 4 ;
308
309 m = (m2 % 2 ) ? m2/2+1 : m2/2 ;
310 if (m >= 128)
311 break;
312 fout = (DAC_FREF * (m + 2)) / ((1 << p) * (n + 2));
313 if ((abs(fout - freq) < best_err) && (m > 0)) {
314 best_n = n;
315 best_m = m;
316 best_err = abs(fout - freq);
317 /* we get the lowest m , allowing 0.5% error in freq*/
318 if (200*best_err < freq) break;
319 }
320 }
321 if (best_n == -1) /* unlikely, but who knows ? */
322 return -EINVAL;
323 t->p = p;
324 t->n = best_n;
325 t->m = best_m;
326 *freq_out = (DAC_FREF * (t->m + 2)) / ((1 << t->p) * (t->n + 2));
327 f_ddprintk ("m: %d, n: %d, p: %d, F: %dKhz\n",
328 t->m, t->n, t->p, *freq_out);
329 return 0;
330 }
331
332 /*
333 * clear lfb screen
334 */
sstfb_clear_screen(struct fb_info * info)335 static void sstfb_clear_screen(struct fb_info *info)
336 {
337 /* clear screen */
338 fb_memset_io(info->screen_base, 0, info->fix.smem_len);
339 }
340
341
342 /**
343 * sstfb_check_var - Optional function. Validates a var passed in.
344 * @var: frame buffer variable screen structure
345 * @info: frame buffer structure that represents a single frame buffer
346 *
347 * Limit to the abilities of a single chip as SLI is not supported
348 * by this driver.
349 */
350
sstfb_check_var(struct fb_var_screeninfo * var,struct fb_info * info)351 static int sstfb_check_var(struct fb_var_screeninfo *var,
352 struct fb_info *info)
353 {
354 struct sstfb_par *par = info->par;
355 int hSyncOff = var->xres + var->right_margin + var->left_margin;
356 int vSyncOff = var->yres + var->lower_margin + var->upper_margin;
357 int vBackPorch = var->left_margin, yDim = var->yres;
358 int vSyncOn = var->vsync_len;
359 int tiles_in_X, real_length;
360 unsigned int freq;
361
362 if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
363 printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
364 PICOS2KHZ(var->pixclock));
365 return -EINVAL;
366 }
367 var->pixclock = KHZ2PICOS(freq);
368
369 if (var->vmode & FB_VMODE_INTERLACED)
370 vBackPorch += (vBackPorch % 2);
371 if (var->vmode & FB_VMODE_DOUBLE) {
372 vBackPorch <<= 1;
373 yDim <<=1;
374 vSyncOn <<=1;
375 vSyncOff <<=1;
376 }
377
378 switch (var->bits_per_pixel) {
379 case 0 ... 16 :
380 var->bits_per_pixel = 16;
381 break;
382 default :
383 printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
384 return -EINVAL;
385 }
386
387 /* validity tests */
388 if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1 ||
389 hSyncOff <= 1 || var->left_margin <= 2 || vSyncOn <= 0 ||
390 vSyncOff <= 0 || vBackPorch <= 0) {
391 return -EINVAL;
392 }
393
394 if (IS_VOODOO2(par)) {
395 /* Voodoo 2 limits */
396 tiles_in_X = (var->xres + 63 ) / 64 * 2;
397
398 if (var->xres > POW2(11) || yDim >= POW2(11)) {
399 printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
400 var->xres, var->yres);
401 return -EINVAL;
402 }
403
404 if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) ||
405 var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) ||
406 vSyncOff >= POW2(13) || vBackPorch >= POW2(9) ||
407 tiles_in_X >= POW2(6) || tiles_in_X <= 0) {
408 printk(KERN_ERR "sstfb: Unsupported timings\n");
409 return -EINVAL;
410 }
411 } else {
412 /* Voodoo limits */
413 tiles_in_X = (var->xres + 63 ) / 64;
414
415 if (var->vmode) {
416 printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
417 var->vmode);
418 return -EINVAL;
419 }
420 if (var->xres > POW2(10) || var->yres >= POW2(10)) {
421 printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
422 var->xres, var->yres);
423 return -EINVAL;
424 }
425 if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) ||
426 var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) ||
427 vSyncOff >= POW2(12) || vBackPorch >= POW2(8) ||
428 tiles_in_X >= POW2(4) || tiles_in_X <= 0) {
429 printk(KERN_ERR "sstfb: Unsupported timings\n");
430 return -EINVAL;
431 }
432 }
433
434 /* it seems that the fbi uses tiles of 64x16 pixels to "map" the mem */
435 /* FIXME: i don't like this... looks wrong */
436 real_length = tiles_in_X * (IS_VOODOO2(par) ? 32 : 64 )
437 * ((var->bits_per_pixel == 16) ? 2 : 4);
438
439 if (real_length * yDim > info->fix.smem_len) {
440 printk(KERN_ERR "sstfb: Not enough video memory\n");
441 return -ENOMEM;
442 }
443
444 var->sync &= (FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT);
445 var->vmode &= (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE);
446 var->xoffset = 0;
447 var->yoffset = 0;
448 var->height = -1;
449 var->width = -1;
450
451 /*
452 * correct the color bit fields
453 */
454 /* var->{red|green|blue}.msb_right = 0; */
455
456 switch (var->bits_per_pixel) {
457 case 16: /* RGB 565 LfbMode 0 */
458 var->red.length = 5;
459 var->green.length = 6;
460 var->blue.length = 5;
461 var->transp.length = 0;
462
463 var->red.offset = 11;
464 var->green.offset = 5;
465 var->blue.offset = 0;
466 var->transp.offset = 0;
467 break;
468 default:
469 return -EINVAL;
470 }
471 return 0;
472 }
473
474 /**
475 * sstfb_set_par - Optional function. Alters the hardware state.
476 * @info: frame buffer structure that represents a single frame buffer
477 */
sstfb_set_par(struct fb_info * info)478 static int sstfb_set_par(struct fb_info *info)
479 {
480 struct sstfb_par *par = info->par;
481 u32 lfbmode, fbiinit1, fbiinit2, fbiinit3, fbiinit5, fbiinit6=0;
482 struct pci_dev *sst_dev = par->dev;
483 unsigned int freq;
484 int ntiles;
485
486 par->hSyncOff = info->var.xres + info->var.right_margin + info->var.left_margin;
487
488 par->yDim = info->var.yres;
489 par->vSyncOn = info->var.vsync_len;
490 par->vSyncOff = info->var.yres + info->var.lower_margin + info->var.upper_margin;
491 par->vBackPorch = info->var.upper_margin;
492
493 /* We need par->pll */
494 sst_calc_pll(PICOS2KHZ(info->var.pixclock), &freq, &par->pll);
495
496 if (info->var.vmode & FB_VMODE_INTERLACED)
497 par->vBackPorch += (par->vBackPorch % 2);
498 if (info->var.vmode & FB_VMODE_DOUBLE) {
499 par->vBackPorch <<= 1;
500 par->yDim <<=1;
501 par->vSyncOn <<=1;
502 par->vSyncOff <<=1;
503 }
504
505 if (IS_VOODOO2(par)) {
506 /* voodoo2 has 32 pixel wide tiles , BUT strange things
507 happen with odd number of tiles */
508 par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2;
509 } else {
510 /* voodoo1 has 64 pixels wide tiles. */
511 par->tiles_in_X = (info->var.xres + 63 ) / 64;
512 }
513
514 f_ddprintk("hsync_len hSyncOff vsync_len vSyncOff\n");
515 f_ddprintk("%-7d %-8d %-7d %-8d\n",
516 info->var.hsync_len, par->hSyncOff,
517 par->vSyncOn, par->vSyncOff);
518 f_ddprintk("left_margin upper_margin xres yres Freq\n");
519 f_ddprintk("%-10d %-10d %-4d %-4d %-8ld\n",
520 info->var.left_margin, info->var.upper_margin,
521 info->var.xres, info->var.yres, PICOS2KHZ(info->var.pixclock));
522
523 sst_write(NOPCMD, 0);
524 sst_wait_idle();
525 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
526 sst_set_bits(FBIINIT1, VIDEO_RESET);
527 sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
528 sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
529 sst_wait_idle();
530
531 /*sst_unset_bits (FBIINIT0, FBI_RESET); / reenable FBI ? */
532
533 sst_write(BACKPORCH, par->vBackPorch << 16 | (info->var.left_margin - 2));
534 sst_write(VIDEODIMENSIONS, par->yDim << 16 | (info->var.xres - 1));
535 sst_write(HSYNC, (par->hSyncOff - 1) << 16 | (info->var.hsync_len - 1));
536 sst_write(VSYNC, par->vSyncOff << 16 | par->vSyncOn);
537
538 fbiinit2 = sst_read(FBIINIT2);
539 fbiinit3 = sst_read(FBIINIT3);
540
541 /* everything is reset. we enable fbiinit2/3 remap : dac access ok */
542 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
543 PCI_EN_INIT_WR | PCI_REMAP_DAC );
544
545 par->dac_sw.set_vidmod(info, info->var.bits_per_pixel);
546
547 /* set video clock */
548 par->dac_sw.set_pll(info, &par->pll, VID_CLOCK);
549
550 /* disable fbiinit2/3 remap */
551 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
552 PCI_EN_INIT_WR);
553
554 /* restore fbiinit2/3 */
555 sst_write(FBIINIT2,fbiinit2);
556 sst_write(FBIINIT3,fbiinit3);
557
558 fbiinit1 = (sst_read(FBIINIT1) & VIDEO_MASK)
559 | EN_DATA_OE
560 | EN_BLANK_OE
561 | EN_HVSYNC_OE
562 | EN_DCLK_OE
563 /* | (15 << TILES_IN_X_SHIFT) */
564 | SEL_INPUT_VCLK_2X
565 /* | (2 << VCLK_2X_SEL_DEL_SHIFT)
566 | (2 << VCLK_DEL_SHIFT) */;
567 /* try with vclk_in_delay =0 (bits 29:30) , vclk_out_delay =0 (bits(27:28)
568 in (near) future set them accordingly to revision + resolution (cf glide)
569 first understand what it stands for :)
570 FIXME: there are some artefacts... check for the vclk_in_delay
571 lets try with 6ns delay in both vclk_out & in...
572 doh... they're still there :\
573 */
574
575 ntiles = par->tiles_in_X;
576 if (IS_VOODOO2(par)) {
577 fbiinit1 |= ((ntiles & 0x20) >> 5) << TILES_IN_X_MSB_SHIFT
578 | ((ntiles & 0x1e) >> 1) << TILES_IN_X_SHIFT;
579 /* as the only value of importance for us in fbiinit6 is tiles in X (lsb),
580 and as reading fbinit 6 will return crap (see FBIINIT6_DEFAULT) we just
581 write our value. BTW due to the dac unable to read odd number of tiles, this
582 field is always null ... */
583 fbiinit6 = (ntiles & 0x1) << TILES_IN_X_LSB_SHIFT;
584 }
585 else
586 fbiinit1 |= ntiles << TILES_IN_X_SHIFT;
587
588 switch (info->var.bits_per_pixel) {
589 case 16:
590 fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL;
591 break;
592 default:
593 return -EINVAL;
594 }
595 sst_write(FBIINIT1, fbiinit1);
596 if (IS_VOODOO2(par)) {
597 sst_write(FBIINIT6, fbiinit6);
598 fbiinit5=sst_read(FBIINIT5) & FBIINIT5_MASK ;
599 if (info->var.vmode & FB_VMODE_INTERLACED)
600 fbiinit5 |= INTERLACE;
601 if (info->var.vmode & FB_VMODE_DOUBLE)
602 fbiinit5 |= VDOUBLESCAN;
603 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
604 fbiinit5 |= HSYNC_HIGH;
605 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
606 fbiinit5 |= VSYNC_HIGH;
607 sst_write(FBIINIT5, fbiinit5);
608 }
609 sst_wait_idle();
610 sst_unset_bits(FBIINIT1, VIDEO_RESET);
611 sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
612 sst_set_bits(FBIINIT2, EN_DRAM_REFRESH);
613 /* disables fbiinit writes */
614 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
615
616 /* set lfbmode : set mode + front buffer for reads/writes
617 + disable pipeline */
618 switch (info->var.bits_per_pixel) {
619 case 16:
620 lfbmode = LFB_565;
621 break;
622 default:
623 return -EINVAL;
624 }
625
626 #if defined(__BIG_ENDIAN)
627 /* Enable byte-swizzle functionality in hardware.
628 * With this enabled, all our read- and write-accesses to
629 * the voodoo framebuffer can be done in native format, and
630 * the hardware will automatically convert it to little-endian.
631 * - tested on HP-PARISC, Helge Deller <deller@gmx.de> */
632 lfbmode |= ( LFB_WORD_SWIZZLE_WR | LFB_BYTE_SWIZZLE_WR |
633 LFB_WORD_SWIZZLE_RD | LFB_BYTE_SWIZZLE_RD );
634 #endif
635
636 if (clipping) {
637 sst_write(LFBMODE, lfbmode | EN_PXL_PIPELINE);
638 /*
639 * Set "clipping" dimensions. If clipping is disabled and
640 * writes to offscreen areas of the framebuffer are performed,
641 * the "behaviour is undefined" (_very_ undefined) - Urs
642 */
643 /* btw, it requires enabling pixel pipeline in LFBMODE .
644 off screen read/writes will just wrap and read/print pixels
645 on screen. Ugly but not that dangerous */
646 f_ddprintk("setting clipping dimensions 0..%d, 0..%d\n",
647 info->var.xres - 1, par->yDim - 1);
648
649 sst_write(CLIP_LEFT_RIGHT, info->var.xres);
650 sst_write(CLIP_LOWY_HIGHY, par->yDim);
651 sst_set_bits(FBZMODE, EN_CLIPPING | EN_RGB_WRITE);
652 } else {
653 /* no clipping : direct access, no pipeline */
654 sst_write(LFBMODE, lfbmode);
655 }
656 return 0;
657 }
658
659 /**
660 * sstfb_setcolreg - Optional function. Sets a color register.
661 * @regno: hardware colormap register
662 * @red: frame buffer colormap structure
663 * @green: The green value which can be up to 16 bits wide
664 * @blue: The blue value which can be up to 16 bits wide.
665 * @transp: If supported the alpha value which can be up to 16 bits wide.
666 * @info: frame buffer info structure
667 */
sstfb_setcolreg(u_int regno,u_int red,u_int green,u_int blue,u_int transp,struct fb_info * info)668 static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
669 u_int transp, struct fb_info *info)
670 {
671 struct sstfb_par *par = info->par;
672 u32 col;
673
674 f_dddprintk("sstfb_setcolreg\n");
675 f_dddprintk("%-2d rgbt: %#x, %#x, %#x, %#x\n",
676 regno, red, green, blue, transp);
677 if (regno > 15)
678 return 0;
679
680 red >>= (16 - info->var.red.length);
681 green >>= (16 - info->var.green.length);
682 blue >>= (16 - info->var.blue.length);
683 transp >>= (16 - info->var.transp.length);
684 col = (red << info->var.red.offset)
685 | (green << info->var.green.offset)
686 | (blue << info->var.blue.offset)
687 | (transp << info->var.transp.offset);
688
689 par->palette[regno] = col;
690
691 return 0;
692 }
693
sstfb_setvgapass(struct fb_info * info,int enable)694 static void sstfb_setvgapass( struct fb_info *info, int enable )
695 {
696 struct sstfb_par *par = info->par;
697 struct pci_dev *sst_dev = par->dev;
698 u32 fbiinit0, tmp;
699
700 enable = enable ? 1:0;
701 if (par->vgapass == enable)
702 return;
703 par->vgapass = enable;
704
705 pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
706 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
707 tmp | PCI_EN_INIT_WR );
708 fbiinit0 = sst_read (FBIINIT0);
709 if (par->vgapass) {
710 sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
711 fb_info(info, "Enabling VGA pass-through\n");
712 } else {
713 sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
714 fb_info(info, "Disabling VGA pass-through\n");
715 }
716 pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
717 }
718
719 #ifdef CONFIG_FB_DEVICE
store_vgapass(struct device * device,struct device_attribute * attr,const char * buf,size_t count)720 static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
721 const char *buf, size_t count)
722 {
723 struct fb_info *info = dev_get_drvdata(device);
724 char ** last = NULL;
725 int val;
726
727 val = simple_strtoul(buf, last, 0);
728 sstfb_setvgapass(info, val);
729
730 return count;
731 }
732
show_vgapass(struct device * device,struct device_attribute * attr,char * buf)733 static ssize_t show_vgapass(struct device *device, struct device_attribute *attr,
734 char *buf)
735 {
736 struct fb_info *info = dev_get_drvdata(device);
737 struct sstfb_par *par = info->par;
738 return sprintf(buf, "%d\n", par->vgapass);
739 }
740
741 static struct device_attribute device_attrs[] = {
742 __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
743 };
744 #endif
745
sstfb_ioctl(struct fb_info * info,unsigned int cmd,unsigned long arg)746 static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
747 unsigned long arg)
748 {
749 struct sstfb_par *par;
750 u32 val;
751
752 switch (cmd) {
753 /* set/get VGA pass_through mode */
754 case SSTFB_SET_VGAPASS:
755 if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
756 return -EFAULT;
757 sstfb_setvgapass(info, val);
758 return 0;
759 case SSTFB_GET_VGAPASS:
760 par = info->par;
761 val = par->vgapass;
762 if (copy_to_user((void __user *)arg, &val, sizeof(val)))
763 return -EFAULT;
764 return 0;
765 }
766
767 return -EINVAL;
768 }
769
770
771 /*
772 * Screen-to-Screen BitBlt 2D command (for the bmove fb op.) - Voodoo2 only
773 */
774 #if 0
775 static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
776 {
777 struct sstfb_par *par = info->par;
778 u32 stride = info->fix.line_length;
779
780 if (!IS_VOODOO2(par))
781 return;
782
783 sst_write(BLTSRCBASEADDR, 0);
784 sst_write(BLTDSTBASEADDR, 0);
785 sst_write(BLTROP, BLTROP_COPY);
786 sst_write(BLTXYSTRIDES, stride | (stride << 16));
787 sst_write(BLTSRCXY, area->sx | (area->sy << 16));
788 sst_write(BLTDSTXY, area->dx | (area->dy << 16));
789 sst_write(BLTSIZE, area->width | (area->height << 16));
790 sst_write(BLTCOMMAND, BLT_SCR2SCR_BITBLT | LAUNCH_BITBLT |
791 (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) );
792 sst_wait_idle();
793 }
794 #endif
795
796
797 /*
798 * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
799 */
800 #if 0
801 static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
802 {
803 struct sstfb_par *par = info->par;
804 u32 stride = info->fix.line_length;
805
806 if (!IS_VOODOO2(par))
807 return;
808
809 sst_write(BLTCLIPX, info->var.xres);
810 sst_write(BLTCLIPY, info->var.yres);
811
812 sst_write(BLTDSTBASEADDR, 0);
813 sst_write(BLTCOLOR, rect->color);
814 sst_write(BLTROP, rect->rop == ROP_COPY ? BLTROP_COPY : BLTROP_XOR);
815 sst_write(BLTXYSTRIDES, stride | (stride << 16));
816 sst_write(BLTDSTXY, rect->dx | (rect->dy << 16));
817 sst_write(BLTSIZE, rect->width | (rect->height << 16));
818 sst_write(BLTCOMMAND, BLT_RECFILL_BITBLT | LAUNCH_BITBLT
819 | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
820 sst_wait_idle();
821 }
822 #endif
823
824
825
826 /*
827 * get lfb size
828 */
sst_get_memsize(struct fb_info * info,__u32 * memsize)829 static int sst_get_memsize(struct fb_info *info, __u32 *memsize)
830 {
831 u8 __iomem *fbbase_virt = info->screen_base;
832
833 /* force memsize */
834 if (mem >= 1 && mem <= 4) {
835 *memsize = (mem * 0x100000);
836 printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
837 return 1;
838 }
839
840 writel(0xdeadbeef, fbbase_virt);
841 writel(0xdeadbeef, fbbase_virt+0x100000);
842 writel(0xdeadbeef, fbbase_virt+0x200000);
843 f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
844 readl(fbbase_virt), readl(fbbase_virt + 0x100000),
845 readl(fbbase_virt + 0x200000));
846
847 writel(0xabcdef01, fbbase_virt);
848
849 f_ddprintk("0MB: %#x, 1MB: %#x, 2MB: %#x\n",
850 readl(fbbase_virt), readl(fbbase_virt + 0x100000),
851 readl(fbbase_virt + 0x200000));
852
853 /* checks for 4mb lfb, then 2, then defaults to 1 */
854 if (readl(fbbase_virt + 0x200000) == 0xdeadbeef)
855 *memsize = 0x400000;
856 else if (readl(fbbase_virt + 0x100000) == 0xdeadbeef)
857 *memsize = 0x200000;
858 else
859 *memsize = 0x100000;
860 f_ddprintk("detected memsize: %dMB\n", *memsize >> 20);
861 return 1;
862 }
863
864
865 /*
866 * DAC detection routines
867 */
868
869 /* fbi should be idle, and fifo emty and mem disabled */
870 /* supposed to detect AT&T ATT20C409 and Ti TVP3409 ramdacs */
871
sst_detect_att(struct fb_info * info)872 static int sst_detect_att(struct fb_info *info)
873 {
874 struct sstfb_par *par = info->par;
875 int i, mir, dir;
876
877 for (i = 0; i < 3; i++) {
878 sst_dac_write(DACREG_WMA, 0); /* backdoor */
879 sst_dac_read(DACREG_RMR); /* read 4 times RMR */
880 sst_dac_read(DACREG_RMR);
881 sst_dac_read(DACREG_RMR);
882 sst_dac_read(DACREG_RMR);
883 /* the fifth time, CR0 is read */
884 sst_dac_read(DACREG_RMR);
885 /* the 6th, manufacturer id register */
886 mir = sst_dac_read(DACREG_RMR);
887 /*the 7th, device ID register */
888 dir = sst_dac_read(DACREG_RMR);
889 f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
890 if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) {
891 return 1;
892 }
893 }
894 return 0;
895 }
896
sst_detect_ti(struct fb_info * info)897 static int sst_detect_ti(struct fb_info *info)
898 {
899 struct sstfb_par *par = info->par;
900 int i, mir, dir;
901
902 for (i = 0; i<3; i++) {
903 sst_dac_write(DACREG_WMA, 0); /* backdoor */
904 sst_dac_read(DACREG_RMR); /* read 4 times RMR */
905 sst_dac_read(DACREG_RMR);
906 sst_dac_read(DACREG_RMR);
907 sst_dac_read(DACREG_RMR);
908 /* the fifth time, CR0 is read */
909 sst_dac_read(DACREG_RMR);
910 /* the 6th, manufacturer id register */
911 mir = sst_dac_read(DACREG_RMR);
912 /*the 7th, device ID register */
913 dir = sst_dac_read(DACREG_RMR);
914 f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
915 if ((mir == DACREG_MIR_TI ) && (dir == DACREG_DIR_TI)) {
916 return 1;
917 }
918 }
919 return 0;
920 }
921
922 /*
923 * try to detect ICS5342 ramdac
924 * we get the 1st byte (M value) of preset f1,f7 and fB
925 * why those 3 ? mmmh... for now, i'll do it the glide way...
926 * and ask questions later. anyway, it seems that all the freq registers are
927 * really at their default state (cf specs) so i ask again, why those 3 regs ?
928 * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for
929 * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be
930 * touched...
931 * is it really safe ? how can i reset this ramdac ? geee...
932 */
sst_detect_ics(struct fb_info * info)933 static int sst_detect_ics(struct fb_info *info)
934 {
935 struct sstfb_par *par = info->par;
936 int m_clk0_1, m_clk0_7, m_clk1_b;
937 int n_clk0_1, n_clk0_7, n_clk1_b;
938 int i;
939
940 for (i = 0; i<5; i++ ) {
941 sst_dac_write(DACREG_ICS_PLLRMA, 0x1); /* f1 */
942 m_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
943 n_clk0_1 = sst_dac_read(DACREG_ICS_PLLDATA);
944 sst_dac_write(DACREG_ICS_PLLRMA, 0x7); /* f7 */
945 m_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
946 n_clk0_7 = sst_dac_read(DACREG_ICS_PLLDATA);
947 sst_dac_write(DACREG_ICS_PLLRMA, 0xb); /* fB */
948 m_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
949 n_clk1_b= sst_dac_read(DACREG_ICS_PLLDATA);
950 f_ddprintk("m_clk0_1: %#x, m_clk0_7: %#x, m_clk1_b: %#x\n",
951 m_clk0_1, m_clk0_7, m_clk1_b);
952 f_ddprintk("n_clk0_1: %#x, n_clk0_7: %#x, n_clk1_b: %#x\n",
953 n_clk0_1, n_clk0_7, n_clk1_b);
954 if (( m_clk0_1 == DACREG_ICS_PLL_CLK0_1_INI)
955 && (m_clk0_7 == DACREG_ICS_PLL_CLK0_7_INI)
956 && (m_clk1_b == DACREG_ICS_PLL_CLK1_B_INI)) {
957 return 1;
958 }
959 }
960 return 0;
961 }
962
963
964 /*
965 * gfx, video, pci fifo should be reset, dram refresh disabled
966 * see detect_dac
967 */
968
sst_set_pll_att_ti(struct fb_info * info,const struct pll_timing * t,const int clock)969 static int sst_set_pll_att_ti(struct fb_info *info,
970 const struct pll_timing *t, const int clock)
971 {
972 struct sstfb_par *par = info->par;
973 u8 cr0, cc;
974
975 /* enable indexed mode */
976 sst_dac_write(DACREG_WMA, 0); /* backdoor */
977 sst_dac_read(DACREG_RMR); /* 1 time: RMR */
978 sst_dac_read(DACREG_RMR); /* 2 RMR */
979 sst_dac_read(DACREG_RMR); /* 3 // */
980 sst_dac_read(DACREG_RMR); /* 4 // */
981 cr0 = sst_dac_read(DACREG_RMR); /* 5 CR0 */
982
983 sst_dac_write(DACREG_WMA, 0);
984 sst_dac_read(DACREG_RMR);
985 sst_dac_read(DACREG_RMR);
986 sst_dac_read(DACREG_RMR);
987 sst_dac_read(DACREG_RMR);
988 sst_dac_write(DACREG_RMR, (cr0 & 0xf0)
989 | DACREG_CR0_EN_INDEXED
990 | DACREG_CR0_8BIT
991 | DACREG_CR0_PWDOWN );
992 /* so, now we are in indexed mode . dunno if its common, but
993 i find this way of doing things a little bit weird :p */
994
995 udelay(300);
996 cc = dac_i_read(DACREG_CC_I);
997 switch (clock) {
998 case VID_CLOCK:
999 dac_i_write(DACREG_AC0_I, t->m);
1000 dac_i_write(DACREG_AC1_I, t->p << 6 | t->n);
1001 dac_i_write(DACREG_CC_I,
1002 (cc & 0x0f) | DACREG_CC_CLKA | DACREG_CC_CLKA_C);
1003 break;
1004 case GFX_CLOCK:
1005 dac_i_write(DACREG_BD0_I, t->m);
1006 dac_i_write(DACREG_BD1_I, t->p << 6 | t->n);
1007 dac_i_write(DACREG_CC_I,
1008 (cc & 0xf0) | DACREG_CC_CLKB | DACREG_CC_CLKB_D);
1009 break;
1010 default:
1011 dprintk("%s: wrong clock code '%d'\n",
1012 __func__, clock);
1013 return 0;
1014 }
1015 udelay(300);
1016
1017 /* power up the dac & return to "normal" non-indexed mode */
1018 dac_i_write(DACREG_CR0_I,
1019 cr0 & ~DACREG_CR0_PWDOWN & ~DACREG_CR0_EN_INDEXED);
1020 return 1;
1021 }
1022
sst_set_pll_ics(struct fb_info * info,const struct pll_timing * t,const int clock)1023 static int sst_set_pll_ics(struct fb_info *info,
1024 const struct pll_timing *t, const int clock)
1025 {
1026 struct sstfb_par *par = info->par;
1027 u8 pll_ctrl;
1028
1029 sst_dac_write(DACREG_ICS_PLLRMA, DACREG_ICS_PLL_CTRL);
1030 pll_ctrl = sst_dac_read(DACREG_ICS_PLLDATA);
1031 switch(clock) {
1032 case VID_CLOCK:
1033 sst_dac_write(DACREG_ICS_PLLWMA, 0x0); /* CLK0, f0 */
1034 sst_dac_write(DACREG_ICS_PLLDATA, t->m);
1035 sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
1036 /* selects freq f0 for clock 0 */
1037 sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
1038 sst_dac_write(DACREG_ICS_PLLDATA,
1039 (pll_ctrl & 0xd8)
1040 | DACREG_ICS_CLK0
1041 | DACREG_ICS_CLK0_0);
1042 break;
1043 case GFX_CLOCK :
1044 sst_dac_write(DACREG_ICS_PLLWMA, 0xa); /* CLK1, fA */
1045 sst_dac_write(DACREG_ICS_PLLDATA, t->m);
1046 sst_dac_write(DACREG_ICS_PLLDATA, t->p << 5 | t->n);
1047 /* selects freq fA for clock 1 */
1048 sst_dac_write(DACREG_ICS_PLLWMA, DACREG_ICS_PLL_CTRL);
1049 sst_dac_write(DACREG_ICS_PLLDATA,
1050 (pll_ctrl & 0xef) | DACREG_ICS_CLK1_A);
1051 break;
1052 default:
1053 dprintk("%s: wrong clock code '%d'\n",
1054 __func__, clock);
1055 return 0;
1056 }
1057 udelay(300);
1058 return 1;
1059 }
1060
sst_set_vidmod_att_ti(struct fb_info * info,const int bpp)1061 static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
1062 {
1063 struct sstfb_par *par = info->par;
1064 u8 cr0;
1065
1066 sst_dac_write(DACREG_WMA, 0); /* backdoor */
1067 sst_dac_read(DACREG_RMR); /* read 4 times RMR */
1068 sst_dac_read(DACREG_RMR);
1069 sst_dac_read(DACREG_RMR);
1070 sst_dac_read(DACREG_RMR);
1071 /* the fifth time, CR0 is read */
1072 cr0 = sst_dac_read(DACREG_RMR);
1073
1074 sst_dac_write(DACREG_WMA, 0); /* backdoor */
1075 sst_dac_read(DACREG_RMR); /* read 4 times RMR */
1076 sst_dac_read(DACREG_RMR);
1077 sst_dac_read(DACREG_RMR);
1078 sst_dac_read(DACREG_RMR);
1079 /* cr0 */
1080 switch(bpp) {
1081 case 16:
1082 sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
1083 break;
1084 default:
1085 dprintk("%s: bad depth '%u'\n", __func__, bpp);
1086 break;
1087 }
1088 }
1089
sst_set_vidmod_ics(struct fb_info * info,const int bpp)1090 static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
1091 {
1092 struct sstfb_par *par = info->par;
1093
1094 switch(bpp) {
1095 case 16:
1096 sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
1097 break;
1098 default:
1099 dprintk("%s: bad depth '%u'\n", __func__, bpp);
1100 break;
1101 }
1102 }
1103
1104 /*
1105 * detect dac type
1106 * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset,
1107 * dram refresh disabled, FbiInit remaped.
1108 * TODO: mmh.. maybe i should put the "prerequisite" in the func ...
1109 */
1110
1111
1112 static struct dac_switch dacs[] = {
1113 { .name = "TI TVP3409",
1114 .detect = sst_detect_ti,
1115 .set_pll = sst_set_pll_att_ti,
1116 .set_vidmod = sst_set_vidmod_att_ti },
1117
1118 { .name = "AT&T ATT20C409",
1119 .detect = sst_detect_att,
1120 .set_pll = sst_set_pll_att_ti,
1121 .set_vidmod = sst_set_vidmod_att_ti },
1122 { .name = "ICS ICS5342",
1123 .detect = sst_detect_ics,
1124 .set_pll = sst_set_pll_ics,
1125 .set_vidmod = sst_set_vidmod_ics },
1126 };
1127
sst_detect_dactype(struct fb_info * info,struct sstfb_par * par)1128 static int sst_detect_dactype(struct fb_info *info, struct sstfb_par *par)
1129 {
1130 int i, ret = 0;
1131
1132 for (i = 0; i < ARRAY_SIZE(dacs); i++) {
1133 ret = dacs[i].detect(info);
1134 if (ret)
1135 break;
1136 }
1137 if (!ret)
1138 return 0;
1139 f_dprintk("%s found %s\n", __func__, dacs[i].name);
1140 par->dac_sw = dacs[i];
1141 return 1;
1142 }
1143
1144 /*
1145 * Internal Routines
1146 */
sst_init(struct fb_info * info,struct sstfb_par * par)1147 static int sst_init(struct fb_info *info, struct sstfb_par *par)
1148 {
1149 u32 fbiinit0, fbiinit1, fbiinit4;
1150 struct pci_dev *dev = par->dev;
1151 struct pll_timing gfx_timings;
1152 struct sst_spec *spec;
1153 int Fout;
1154 int gfx_clock;
1155
1156 spec = &voodoo_spec[par->type];
1157 f_ddprintk(" fbiinit0 fbiinit1 fbiinit2 fbiinit3 fbiinit4 "
1158 " fbiinit6\n");
1159 f_ddprintk("%0#10x %0#10x %0#10x %0#10x %0#10x %0#10x\n",
1160 sst_read(FBIINIT0), sst_read(FBIINIT1), sst_read(FBIINIT2),
1161 sst_read(FBIINIT3), sst_read(FBIINIT4), sst_read(FBIINIT6));
1162 /* disable video clock */
1163 pci_write_config_dword(dev, PCI_VCLK_DISABLE, 0);
1164
1165 /* enable writing to init registers, disable pci fifo */
1166 pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
1167 /* reset video */
1168 sst_set_bits(FBIINIT1, VIDEO_RESET);
1169 sst_wait_idle();
1170 /* reset gfx + pci fifo */
1171 sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
1172 sst_wait_idle();
1173
1174 /* unreset fifo */
1175 /*sst_unset_bits(FBIINIT0, FIFO_RESET);
1176 sst_wait_idle();*/
1177 /* unreset FBI */
1178 /*sst_unset_bits(FBIINIT0, FBI_RESET);
1179 sst_wait_idle();*/
1180
1181 /* disable dram refresh */
1182 sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
1183 sst_wait_idle();
1184 /* remap fbinit2/3 to dac */
1185 pci_write_config_dword(dev, PCI_INIT_ENABLE,
1186 PCI_EN_INIT_WR | PCI_REMAP_DAC );
1187 /* detect dac type */
1188 if (!sst_detect_dactype(info, par)) {
1189 printk(KERN_ERR "sstfb: unknown dac type.\n");
1190 //FIXME watch it: we are not in a safe state, bad bad bad.
1191 return 0;
1192 }
1193
1194 /* set graphic clock */
1195 gfx_clock = spec->default_gfx_clock;
1196 if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
1197 printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
1198 gfx_clock = gfxclk *1000;
1199 } else if (gfxclk) {
1200 printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
1201 }
1202
1203 sst_calc_pll(gfx_clock, &Fout, &gfx_timings);
1204 par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
1205
1206 /* disable fbiinit remap */
1207 pci_write_config_dword(dev, PCI_INIT_ENABLE,
1208 PCI_EN_INIT_WR| PCI_EN_FIFO_WR );
1209 /* defaults init registers */
1210 /* FbiInit0: unreset gfx, unreset fifo */
1211 fbiinit0 = FBIINIT0_DEFAULT;
1212 fbiinit1 = FBIINIT1_DEFAULT;
1213 fbiinit4 = FBIINIT4_DEFAULT;
1214 par->vgapass = vgapass;
1215 if (par->vgapass)
1216 fbiinit0 &= ~DIS_VGA_PASSTHROUGH;
1217 else
1218 fbiinit0 |= DIS_VGA_PASSTHROUGH;
1219 if (slowpci) {
1220 fbiinit1 |= SLOW_PCI_WRITES;
1221 fbiinit4 |= SLOW_PCI_READS;
1222 } else {
1223 fbiinit1 &= ~SLOW_PCI_WRITES;
1224 fbiinit4 &= ~SLOW_PCI_READS;
1225 }
1226 sst_write(FBIINIT0, fbiinit0);
1227 sst_wait_idle();
1228 sst_write(FBIINIT1, fbiinit1);
1229 sst_wait_idle();
1230 sst_write(FBIINIT2, FBIINIT2_DEFAULT);
1231 sst_wait_idle();
1232 sst_write(FBIINIT3, FBIINIT3_DEFAULT);
1233 sst_wait_idle();
1234 sst_write(FBIINIT4, fbiinit4);
1235 sst_wait_idle();
1236 if (IS_VOODOO2(par)) {
1237 sst_write(FBIINIT6, FBIINIT6_DEFAULT);
1238 sst_wait_idle();
1239 }
1240
1241 pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_FIFO_WR);
1242 pci_write_config_dword(dev, PCI_VCLK_ENABLE, 0);
1243 return 1;
1244 }
1245
sst_shutdown(struct fb_info * info)1246 static void sst_shutdown(struct fb_info *info)
1247 {
1248 struct sstfb_par *par = info->par;
1249 struct pci_dev *dev = par->dev;
1250 struct pll_timing gfx_timings;
1251 int Fout;
1252
1253 /* reset video, gfx, fifo, disable dram + remap fbiinit2/3 */
1254 pci_write_config_dword(dev, PCI_INIT_ENABLE, PCI_EN_INIT_WR);
1255 sst_set_bits(FBIINIT1, VIDEO_RESET | EN_BLANKING);
1256 sst_unset_bits(FBIINIT2, EN_DRAM_REFRESH);
1257 sst_set_bits(FBIINIT0, FBI_RESET | FIFO_RESET);
1258 sst_wait_idle();
1259 pci_write_config_dword(dev, PCI_INIT_ENABLE,
1260 PCI_EN_INIT_WR | PCI_REMAP_DAC);
1261 /* set 20Mhz gfx clock */
1262 sst_calc_pll(20000, &Fout, &gfx_timings);
1263 par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
1264 /* TODO maybe shutdown the dac, vrefresh and so on... */
1265 pci_write_config_dword(dev, PCI_INIT_ENABLE,
1266 PCI_EN_INIT_WR);
1267 sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH);
1268 pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
1269 /* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
1270 * from start ? */
1271 pci_write_config_dword(dev, PCI_INIT_ENABLE, 0);
1272
1273 }
1274
1275 /*
1276 * Interface to the world
1277 */
sstfb_setup(char * options)1278 static int sstfb_setup(char *options)
1279 {
1280 char *this_opt;
1281
1282 if (!options || !*options)
1283 return 0;
1284
1285 while ((this_opt = strsep(&options, ",")) != NULL) {
1286 if (!*this_opt) continue;
1287
1288 f_ddprintk("option %s\n", this_opt);
1289
1290 if (!strcmp(this_opt, "vganopass"))
1291 vgapass = 0;
1292 else if (!strcmp(this_opt, "vgapass"))
1293 vgapass = 1;
1294 else if (!strcmp(this_opt, "clipping"))
1295 clipping = 1;
1296 else if (!strcmp(this_opt, "noclipping"))
1297 clipping = 0;
1298 else if (!strcmp(this_opt, "fastpci"))
1299 slowpci = 0;
1300 else if (!strcmp(this_opt, "slowpci"))
1301 slowpci = 1;
1302 else if (!strncmp(this_opt, "mem:",4))
1303 mem = simple_strtoul (this_opt+4, NULL, 0);
1304 else if (!strncmp(this_opt, "gfxclk:",7))
1305 gfxclk = simple_strtoul (this_opt+7, NULL, 0);
1306 else
1307 mode_option = this_opt;
1308 }
1309 return 0;
1310 }
1311
1312
1313 static const struct fb_ops sstfb_ops = {
1314 .owner = THIS_MODULE,
1315 FB_DEFAULT_IOMEM_OPS,
1316 .fb_check_var = sstfb_check_var,
1317 .fb_set_par = sstfb_set_par,
1318 .fb_setcolreg = sstfb_setcolreg,
1319 .fb_ioctl = sstfb_ioctl,
1320 };
1321
sstfb_probe(struct pci_dev * pdev,const struct pci_device_id * id)1322 static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1323 {
1324 struct fb_info *info;
1325 struct fb_fix_screeninfo *fix;
1326 struct sstfb_par *par;
1327 struct sst_spec *spec;
1328 int err;
1329
1330 err = aperture_remove_conflicting_pci_devices(pdev, "sstfb");
1331 if (err)
1332 return err;
1333
1334 /* Enable device in PCI config. */
1335 if ((err=pci_enable_device(pdev))) {
1336 printk(KERN_ERR "cannot enable device\n");
1337 return err;
1338 }
1339
1340 /* Allocate the fb and par structures. */
1341 info = framebuffer_alloc(sizeof(struct sstfb_par), &pdev->dev);
1342 if (!info)
1343 return -ENOMEM;
1344
1345 pci_set_drvdata(pdev, info);
1346
1347 par = info->par;
1348 fix = &info->fix;
1349
1350 par->type = id->driver_data;
1351 spec = &voodoo_spec[par->type];
1352 f_ddprintk("found device : %s\n", spec->name);
1353
1354 par->dev = pdev;
1355 par->revision = pdev->revision;
1356
1357 fix->mmio_start = pci_resource_start(pdev,0);
1358 fix->mmio_len = 0x400000;
1359 fix->smem_start = fix->mmio_start + 0x400000;
1360
1361 if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
1362 printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
1363 goto fail_mmio_mem;
1364 }
1365
1366 if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
1367 printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
1368 goto fail_fb_mem;
1369 }
1370
1371 par->mmio_vbase = ioremap(fix->mmio_start,
1372 fix->mmio_len);
1373 if (!par->mmio_vbase) {
1374 printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
1375 fix->mmio_start);
1376 goto fail_mmio_remap;
1377 }
1378 info->screen_base = ioremap(fix->smem_start, 0x400000);
1379 if (!info->screen_base) {
1380 printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
1381 fix->smem_start);
1382 goto fail_fb_remap;
1383 }
1384
1385 if (!sst_init(info, par)) {
1386 printk(KERN_ERR "sstfb: Init failed\n");
1387 goto fail;
1388 }
1389 sst_get_memsize(info, &fix->smem_len);
1390 strscpy(fix->id, spec->name, sizeof(fix->id));
1391
1392 printk(KERN_INFO "%s (revision %d) with %s dac\n",
1393 fix->id, par->revision, par->dac_sw.name);
1394 printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
1395 fix->smem_start, info->screen_base,
1396 fix->smem_len >> 20);
1397
1398 f_ddprintk("regbase_virt: %p\n", par->mmio_vbase);
1399 f_ddprintk("membase_phys: %#lx\n", fix->smem_start);
1400 f_ddprintk("fbbase_virt: %p\n", info->screen_base);
1401
1402 info->fbops = &sstfb_ops;
1403 info->pseudo_palette = par->palette;
1404
1405 fix->type = FB_TYPE_PACKED_PIXELS;
1406 fix->visual = FB_VISUAL_TRUECOLOR;
1407 fix->accel = FB_ACCEL_NONE; /* FIXME */
1408 /*
1409 * According to the specs, the linelength must be of 1024 *pixels*
1410 * and the 24bpp mode is in fact a 32 bpp mode (and both are in
1411 * fact dithered to 16bit).
1412 */
1413 fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
1414
1415 fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
1416
1417 if (sstfb_check_var(&info->var, info)) {
1418 printk(KERN_ERR "sstfb: invalid video mode.\n");
1419 goto fail;
1420 }
1421
1422 if (sstfb_set_par(info)) {
1423 printk(KERN_ERR "sstfb: can't set default video mode.\n");
1424 goto fail;
1425 }
1426
1427 if (fb_alloc_cmap(&info->cmap, 256, 0)) {
1428 printk(KERN_ERR "sstfb: can't alloc cmap memory.\n");
1429 goto fail;
1430 }
1431
1432 /* register fb */
1433 info->device = &pdev->dev;
1434 if (register_framebuffer(info) < 0) {
1435 printk(KERN_ERR "sstfb: can't register framebuffer.\n");
1436 goto fail_register;
1437 }
1438
1439 sstfb_clear_screen(info);
1440
1441 #ifdef CONFIG_FB_DEVICE
1442 if (device_create_file(info->dev, &device_attrs[0]))
1443 printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
1444 #endif
1445
1446 fb_info(info, "%s frame buffer device at 0x%p\n",
1447 fix->id, info->screen_base);
1448
1449 return 0;
1450
1451 fail_register:
1452 fb_dealloc_cmap(&info->cmap);
1453 fail:
1454 iounmap(info->screen_base);
1455 fail_fb_remap:
1456 iounmap(par->mmio_vbase);
1457 fail_mmio_remap:
1458 release_mem_region(fix->smem_start, 0x400000);
1459 fail_fb_mem:
1460 release_mem_region(fix->mmio_start, info->fix.mmio_len);
1461 fail_mmio_mem:
1462 framebuffer_release(info);
1463 return -ENXIO; /* no voodoo detected */
1464 }
1465
sstfb_remove(struct pci_dev * pdev)1466 static void sstfb_remove(struct pci_dev *pdev)
1467 {
1468 struct sstfb_par *par;
1469 struct fb_info *info;
1470
1471 info = pci_get_drvdata(pdev);
1472 par = info->par;
1473
1474 #ifdef CONFIG_FB_DEVICE
1475 device_remove_file(info->dev, &device_attrs[0]);
1476 #endif
1477 sst_shutdown(info);
1478 iounmap(info->screen_base);
1479 iounmap(par->mmio_vbase);
1480 release_mem_region(info->fix.smem_start, 0x400000);
1481 release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1482 fb_dealloc_cmap(&info->cmap);
1483 unregister_framebuffer(info);
1484 framebuffer_release(info);
1485 }
1486
1487
1488 static const struct pci_device_id sstfb_id_tbl[] = {
1489 { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ),
1490 .driver_data = ID_VOODOO1, },
1491 { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2),
1492 .driver_data = ID_VOODOO2, },
1493 { 0 },
1494 };
1495
1496 static struct pci_driver sstfb_driver = {
1497 .name = "sstfb",
1498 .id_table = sstfb_id_tbl,
1499 .probe = sstfb_probe,
1500 .remove = sstfb_remove,
1501 };
1502
1503
sstfb_init(void)1504 static int sstfb_init(void)
1505 {
1506 char *option = NULL;
1507
1508 if (fb_modesetting_disabled("sstfb"))
1509 return -ENODEV;
1510
1511 if (fb_get_options("sstfb", &option))
1512 return -ENODEV;
1513 sstfb_setup(option);
1514
1515 return pci_register_driver(&sstfb_driver);
1516 }
1517
sstfb_exit(void)1518 static void sstfb_exit(void)
1519 {
1520 pci_unregister_driver(&sstfb_driver);
1521 }
1522
1523
1524 module_init(sstfb_init);
1525 module_exit(sstfb_exit);
1526
1527 MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
1528 MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
1529 MODULE_LICENSE("GPL");
1530
1531 module_param(mem, int, 0);
1532 MODULE_PARM_DESC(mem, "Size of frame buffer memory in MB (1, 2, 4 MB, default=autodetect)");
1533 module_param(vgapass, bool, 0);
1534 MODULE_PARM_DESC(vgapass, "Enable VGA PassThrough mode (0 or 1) (default=0)");
1535 module_param(clipping, bool, 0);
1536 MODULE_PARM_DESC(clipping, "Enable clipping (slower, safer) (0 or 1) (default=1)");
1537 module_param(gfxclk, int, 0);
1538 MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
1539 module_param(slowpci, bool, 0);
1540 MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
1541 module_param(mode_option, charp, 0);
1542 MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");
1543
1544