xref: /linux/drivers/memory/ti-emif-pm.c (revision 06d07429858317ded2db7986113a9e0129cd599b)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * TI AM33XX SRAM EMIF Driver
4  *
5  * Copyright (C) 2016-2017 Texas Instruments Inc.
6  *	Dave Gerlach
7  */
8 
9 #include <linux/err.h>
10 #include <linux/genalloc.h>
11 #include <linux/io.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/of_platform.h>
16 #include <linux/platform_device.h>
17 #include <linux/sram.h>
18 #include <linux/ti-emif-sram.h>
19 
20 #include "emif.h"
21 
22 #define TI_EMIF_SRAM_SYMBOL_OFFSET(sym) ((unsigned long)(sym) - \
23 					 (unsigned long)&ti_emif_sram)
24 
25 #define EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES		0x00a0
26 
27 struct ti_emif_data {
28 	phys_addr_t ti_emif_sram_phys;
29 	phys_addr_t ti_emif_sram_data_phys;
30 	unsigned long ti_emif_sram_virt;
31 	unsigned long ti_emif_sram_data_virt;
32 	struct gen_pool *sram_pool_code;
33 	struct gen_pool	*sram_pool_data;
34 	struct ti_emif_pm_data pm_data;
35 	struct ti_emif_pm_functions pm_functions;
36 };
37 
38 static struct ti_emif_data *emif_instance;
39 
sram_suspend_address(struct ti_emif_data * emif_data,unsigned long addr)40 static u32 sram_suspend_address(struct ti_emif_data *emif_data,
41 				unsigned long addr)
42 {
43 	return (emif_data->ti_emif_sram_virt +
44 		TI_EMIF_SRAM_SYMBOL_OFFSET(addr));
45 }
46 
sram_resume_address(struct ti_emif_data * emif_data,unsigned long addr)47 static phys_addr_t sram_resume_address(struct ti_emif_data *emif_data,
48 				       unsigned long addr)
49 {
50 	return ((unsigned long)emif_data->ti_emif_sram_phys +
51 		TI_EMIF_SRAM_SYMBOL_OFFSET(addr));
52 }
53 
ti_emif_free_sram(struct ti_emif_data * emif_data)54 static void ti_emif_free_sram(struct ti_emif_data *emif_data)
55 {
56 	gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt,
57 		      ti_emif_sram_sz);
58 	gen_pool_free(emif_data->sram_pool_data,
59 		      emif_data->ti_emif_sram_data_virt,
60 		      sizeof(struct emif_regs_amx3));
61 }
62 
ti_emif_alloc_sram(struct device * dev,struct ti_emif_data * emif_data)63 static int ti_emif_alloc_sram(struct device *dev,
64 			      struct ti_emif_data *emif_data)
65 {
66 	struct device_node *np = dev->of_node;
67 	int ret;
68 
69 	emif_data->sram_pool_code = of_gen_pool_get(np, "sram", 0);
70 	if (!emif_data->sram_pool_code) {
71 		dev_err(dev, "Unable to get sram pool for ocmcram code\n");
72 		return -ENODEV;
73 	}
74 
75 	emif_data->ti_emif_sram_virt =
76 			gen_pool_alloc(emif_data->sram_pool_code,
77 				       ti_emif_sram_sz);
78 	if (!emif_data->ti_emif_sram_virt) {
79 		dev_err(dev, "Unable to allocate code memory from ocmcram\n");
80 		return -ENOMEM;
81 	}
82 
83 	/* Save physical address to calculate resume offset during pm init */
84 	emif_data->ti_emif_sram_phys =
85 			gen_pool_virt_to_phys(emif_data->sram_pool_code,
86 					      emif_data->ti_emif_sram_virt);
87 
88 	/* Get sram pool for data section and allocate space */
89 	emif_data->sram_pool_data = of_gen_pool_get(np, "sram", 1);
90 	if (!emif_data->sram_pool_data) {
91 		dev_err(dev, "Unable to get sram pool for ocmcram data\n");
92 		ret = -ENODEV;
93 		goto err_free_sram_code;
94 	}
95 
96 	emif_data->ti_emif_sram_data_virt =
97 				gen_pool_alloc(emif_data->sram_pool_data,
98 					       sizeof(struct emif_regs_amx3));
99 	if (!emif_data->ti_emif_sram_data_virt) {
100 		dev_err(dev, "Unable to allocate data memory from ocmcram\n");
101 		ret = -ENOMEM;
102 		goto err_free_sram_code;
103 	}
104 
105 	/* Save physical address to calculate resume offset during pm init */
106 	emif_data->ti_emif_sram_data_phys =
107 		gen_pool_virt_to_phys(emif_data->sram_pool_data,
108 				      emif_data->ti_emif_sram_data_virt);
109 	/*
110 	 * These functions are called during suspend path while MMU is
111 	 * still on so add virtual base to offset for absolute address
112 	 */
113 	emif_data->pm_functions.save_context =
114 		sram_suspend_address(emif_data,
115 				     (unsigned long)ti_emif_save_context);
116 	emif_data->pm_functions.enter_sr =
117 		sram_suspend_address(emif_data,
118 				     (unsigned long)ti_emif_enter_sr);
119 	emif_data->pm_functions.abort_sr =
120 		sram_suspend_address(emif_data,
121 				     (unsigned long)ti_emif_abort_sr);
122 
123 	/*
124 	 * These are called during resume path when MMU is not enabled
125 	 * so physical address is used instead
126 	 */
127 	emif_data->pm_functions.restore_context =
128 		sram_resume_address(emif_data,
129 				    (unsigned long)ti_emif_restore_context);
130 	emif_data->pm_functions.exit_sr =
131 		sram_resume_address(emif_data,
132 				    (unsigned long)ti_emif_exit_sr);
133 	emif_data->pm_functions.run_hw_leveling =
134 		sram_resume_address(emif_data,
135 				    (unsigned long)ti_emif_run_hw_leveling);
136 
137 	emif_data->pm_data.regs_virt =
138 		(struct emif_regs_amx3 *)emif_data->ti_emif_sram_data_virt;
139 	emif_data->pm_data.regs_phys = emif_data->ti_emif_sram_data_phys;
140 
141 	return 0;
142 
143 err_free_sram_code:
144 	gen_pool_free(emif_data->sram_pool_code, emif_data->ti_emif_sram_virt,
145 		      ti_emif_sram_sz);
146 	return ret;
147 }
148 
ti_emif_push_sram(struct device * dev,struct ti_emif_data * emif_data)149 static int ti_emif_push_sram(struct device *dev, struct ti_emif_data *emif_data)
150 {
151 	void *copy_addr;
152 	u32 data_addr;
153 
154 	copy_addr = sram_exec_copy(emif_data->sram_pool_code,
155 				   (void *)emif_data->ti_emif_sram_virt,
156 				   &ti_emif_sram, ti_emif_sram_sz);
157 	if (!copy_addr) {
158 		dev_err(dev, "Cannot copy emif code to sram\n");
159 		return -ENODEV;
160 	}
161 
162 	data_addr = sram_suspend_address(emif_data,
163 					 (unsigned long)&ti_emif_pm_sram_data);
164 	copy_addr = sram_exec_copy(emif_data->sram_pool_code,
165 				   (void *)data_addr,
166 				   &emif_data->pm_data,
167 				   sizeof(emif_data->pm_data));
168 	if (!copy_addr) {
169 		dev_err(dev, "Cannot copy emif data to code sram\n");
170 		return -ENODEV;
171 	}
172 
173 	return 0;
174 }
175 
176 /*
177  * Due to Usage Note 3.1.2 "DDR3: JEDEC Compliance for Maximum
178  * Self-Refresh Command Limit" found in AM335x Silicon Errata
179  * (Document SPRZ360F Revised November 2013) we must configure
180  * the self refresh delay timer to 0xA (8192 cycles) to avoid
181  * generating too many refresh command from the EMIF.
182  */
ti_emif_configure_sr_delay(struct ti_emif_data * emif_data)183 static void ti_emif_configure_sr_delay(struct ti_emif_data *emif_data)
184 {
185 	writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES,
186 	       (emif_data->pm_data.ti_emif_base_addr_virt +
187 		EMIF_POWER_MANAGEMENT_CONTROL));
188 
189 	writel(EMIF_POWER_MGMT_WAIT_SELF_REFRESH_8192_CYCLES,
190 	       (emif_data->pm_data.ti_emif_base_addr_virt +
191 		EMIF_POWER_MANAGEMENT_CTRL_SHDW));
192 }
193 
194 /**
195  * ti_emif_copy_pm_function_table - copy mapping of pm funcs in sram
196  * @sram_pool: pointer to struct gen_pool where dst resides
197  * @dst: void * to address that table should be copied
198  *
199  * Returns 0 if success other error code if table is not available
200  */
ti_emif_copy_pm_function_table(struct gen_pool * sram_pool,void * dst)201 int ti_emif_copy_pm_function_table(struct gen_pool *sram_pool, void *dst)
202 {
203 	void *copy_addr;
204 
205 	if (!emif_instance)
206 		return -ENODEV;
207 
208 	copy_addr = sram_exec_copy(sram_pool, dst,
209 				   &emif_instance->pm_functions,
210 				   sizeof(emif_instance->pm_functions));
211 	if (!copy_addr)
212 		return -ENODEV;
213 
214 	return 0;
215 }
216 EXPORT_SYMBOL_GPL(ti_emif_copy_pm_function_table);
217 
218 /**
219  * ti_emif_get_mem_type - return type for memory type in use
220  *
221  * Returns memory type value read from EMIF or error code if fails
222  */
ti_emif_get_mem_type(void)223 int ti_emif_get_mem_type(void)
224 {
225 	unsigned long temp;
226 
227 	if (!emif_instance)
228 		return -ENODEV;
229 
230 	temp = readl(emif_instance->pm_data.ti_emif_base_addr_virt +
231 		     EMIF_SDRAM_CONFIG);
232 
233 	temp = (temp & SDRAM_TYPE_MASK) >> SDRAM_TYPE_SHIFT;
234 	return temp;
235 }
236 EXPORT_SYMBOL_GPL(ti_emif_get_mem_type);
237 
238 static const struct of_device_id ti_emif_of_match[] = {
239 	{ .compatible = "ti,emif-am3352", .data =
240 					(void *)EMIF_SRAM_AM33_REG_LAYOUT, },
241 	{ .compatible = "ti,emif-am4372", .data =
242 					(void *)EMIF_SRAM_AM43_REG_LAYOUT, },
243 	{},
244 };
245 MODULE_DEVICE_TABLE(of, ti_emif_of_match);
246 
247 #ifdef CONFIG_PM_SLEEP
ti_emif_resume(struct device * dev)248 static int ti_emif_resume(struct device *dev)
249 {
250 	unsigned long tmp =
251 			__raw_readl((void __iomem *)emif_instance->ti_emif_sram_virt);
252 
253 	/*
254 	 * Check to see if what we are copying is already present in the
255 	 * first byte at the destination, only copy if it is not which
256 	 * indicates we have lost context and sram no longer contains
257 	 * the PM code
258 	 */
259 	if (tmp != ti_emif_sram)
260 		ti_emif_push_sram(dev, emif_instance);
261 
262 	return 0;
263 }
264 
ti_emif_suspend(struct device * dev)265 static int ti_emif_suspend(struct device *dev)
266 {
267 	/*
268 	 * The contents will be present in DDR hence no need to
269 	 * explicitly save
270 	 */
271 	return 0;
272 }
273 #endif /* CONFIG_PM_SLEEP */
274 
ti_emif_probe(struct platform_device * pdev)275 static int ti_emif_probe(struct platform_device *pdev)
276 {
277 	int ret;
278 	struct resource *res;
279 	struct device *dev = &pdev->dev;
280 	struct ti_emif_data *emif_data;
281 
282 	emif_data = devm_kzalloc(dev, sizeof(*emif_data), GFP_KERNEL);
283 	if (!emif_data)
284 		return -ENOMEM;
285 
286 	emif_data->pm_data.ti_emif_sram_config = (unsigned long) device_get_match_data(&pdev->dev);
287 
288 	emif_data->pm_data.ti_emif_base_addr_virt = devm_platform_get_and_ioremap_resource(pdev,
289 											   0,
290 											   &res);
291 	if (IS_ERR(emif_data->pm_data.ti_emif_base_addr_virt)) {
292 		ret = PTR_ERR(emif_data->pm_data.ti_emif_base_addr_virt);
293 		return ret;
294 	}
295 
296 	emif_data->pm_data.ti_emif_base_addr_phys = res->start;
297 
298 	ti_emif_configure_sr_delay(emif_data);
299 
300 	ret = ti_emif_alloc_sram(dev, emif_data);
301 	if (ret)
302 		return ret;
303 
304 	ret = ti_emif_push_sram(dev, emif_data);
305 	if (ret)
306 		goto fail_free_sram;
307 
308 	emif_instance = emif_data;
309 
310 	return 0;
311 
312 fail_free_sram:
313 	ti_emif_free_sram(emif_data);
314 
315 	return ret;
316 }
317 
ti_emif_remove(struct platform_device * pdev)318 static void ti_emif_remove(struct platform_device *pdev)
319 {
320 	struct ti_emif_data *emif_data = emif_instance;
321 
322 	emif_instance = NULL;
323 
324 	ti_emif_free_sram(emif_data);
325 }
326 
327 static const struct dev_pm_ops ti_emif_pm_ops = {
328 	SET_SYSTEM_SLEEP_PM_OPS(ti_emif_suspend, ti_emif_resume)
329 };
330 
331 static struct platform_driver ti_emif_driver = {
332 	.probe = ti_emif_probe,
333 	.remove_new = ti_emif_remove,
334 	.driver = {
335 		.name = KBUILD_MODNAME,
336 		.of_match_table = ti_emif_of_match,
337 		.pm = &ti_emif_pm_ops,
338 	},
339 };
340 module_platform_driver(ti_emif_driver);
341 
342 MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
343 MODULE_DESCRIPTION("Texas Instruments SRAM EMIF driver");
344 MODULE_LICENSE("GPL v2");
345