1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * New driver for Marvell Yukon 2 chipset.
4 * Based on earlier sk98lin, and skge driver.
5 *
6 * This driver intentionally does not support all the features
7 * of the original driver such as link fail-over and link management because
8 * those should be done at higher levels.
9 *
10 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
11 */
12
13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14
15 #include <linux/crc32.h>
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/netdevice.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/etherdevice.h>
21 #include <linux/ethtool.h>
22 #include <linux/pci.h>
23 #include <linux/interrupt.h>
24 #include <linux/ip.h>
25 #include <linux/slab.h>
26 #include <net/ip.h>
27 #include <linux/tcp.h>
28 #include <linux/in.h>
29 #include <linux/delay.h>
30 #include <linux/workqueue.h>
31 #include <linux/if_vlan.h>
32 #include <linux/prefetch.h>
33 #include <linux/debugfs.h>
34 #include <linux/mii.h>
35 #include <linux/of_net.h>
36 #include <linux/dmi.h>
37 #include <linux/skbuff_ref.h>
38
39 #include <asm/irq.h>
40
41 #include "sky2.h"
42
43 #define DRV_NAME "sky2"
44 #define DRV_VERSION "1.30"
45
46 /*
47 * The Yukon II chipset takes 64 bit command blocks (called list elements)
48 * that are organized into three (receive, transmit, status) different rings
49 * similar to Tigon3.
50 */
51
52 #define RX_LE_SIZE 1024
53 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
54 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
55 #define RX_DEF_PENDING RX_MAX_PENDING
56
57 /* This is the worst case number of transmit list elements for a single skb:
58 * VLAN:GSO + CKSUM + Data + skb_frags * DMA
59 */
60 #define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
61 #define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
62 #define TX_MAX_PENDING 1024
63 #define TX_DEF_PENDING 63
64
65 #define TX_WATCHDOG (5 * HZ)
66 #define PHY_RETRIES 1000
67
68 #define SKY2_EEPROM_MAGIC 0x9955aabb
69
70 #define RING_NEXT(x, s) (((x)+1) & ((s)-1))
71
72 static const u32 default_msg =
73 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
74 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
75 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
76
77 static int debug = -1; /* defaults above */
78 module_param(debug, int, 0);
79 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
80
81 static int copybreak __read_mostly = 128;
82 module_param(copybreak, int, 0);
83 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
84
85 static int disable_msi = -1;
86 module_param(disable_msi, int, 0);
87 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
88
89 static int legacy_pme = 0;
90 module_param(legacy_pme, int, 0);
91 MODULE_PARM_DESC(legacy_pme, "Legacy power management");
92
93 static const struct pci_device_id sky2_id_table[] = {
94 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
95 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
96 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
97 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
98 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
99 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
100 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
101 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
102 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
103 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
104 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
105 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
106 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
107 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
108 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4373) }, /* 88E8075 */
134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
136 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4382) }, /* 88E8079 */
137 { 0 }
138 };
139
140 MODULE_DEVICE_TABLE(pci, sky2_id_table);
141
142 /* Avoid conditionals by using array */
143 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
144 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
145 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
146
147 static void sky2_set_multicast(struct net_device *dev);
148 static irqreturn_t sky2_intr(int irq, void *dev_id);
149
150 /* Access to PHY via serial interconnect */
gm_phy_write(struct sky2_hw * hw,unsigned port,u16 reg,u16 val)151 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
152 {
153 int i;
154
155 gma_write16(hw, port, GM_SMI_DATA, val);
156 gma_write16(hw, port, GM_SMI_CTRL,
157 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
158
159 for (i = 0; i < PHY_RETRIES; i++) {
160 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
161 if (ctrl == 0xffff)
162 goto io_error;
163
164 if (!(ctrl & GM_SMI_CT_BUSY))
165 return 0;
166
167 udelay(10);
168 }
169
170 dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
171 return -ETIMEDOUT;
172
173 io_error:
174 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
175 return -EIO;
176 }
177
__gm_phy_read(struct sky2_hw * hw,unsigned port,u16 reg,u16 * val)178 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
179 {
180 int i;
181
182 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
183 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
184
185 for (i = 0; i < PHY_RETRIES; i++) {
186 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
187 if (ctrl == 0xffff)
188 goto io_error;
189
190 if (ctrl & GM_SMI_CT_RD_VAL) {
191 *val = gma_read16(hw, port, GM_SMI_DATA);
192 return 0;
193 }
194
195 udelay(10);
196 }
197
198 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
199 return -ETIMEDOUT;
200 io_error:
201 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
202 return -EIO;
203 }
204
gm_phy_read(struct sky2_hw * hw,unsigned port,u16 reg)205 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
206 {
207 u16 v = 0;
208 __gm_phy_read(hw, port, reg, &v);
209 return v;
210 }
211
212
sky2_power_on(struct sky2_hw * hw)213 static void sky2_power_on(struct sky2_hw *hw)
214 {
215 /* switch power to VCC (WA for VAUX problem) */
216 sky2_write8(hw, B0_POWER_CTRL,
217 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
218
219 /* disable Core Clock Division, */
220 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
221
222 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
223 /* enable bits are inverted */
224 sky2_write8(hw, B2_Y2_CLK_GATE,
225 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
226 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
227 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
228 else
229 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
230
231 if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
232 u32 reg;
233
234 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
235
236 reg = sky2_pci_read32(hw, PCI_DEV_REG4);
237 /* set all bits to 0 except bits 15..12 and 8 */
238 reg &= P_ASPM_CONTROL_MSK;
239 sky2_pci_write32(hw, PCI_DEV_REG4, reg);
240
241 reg = sky2_pci_read32(hw, PCI_DEV_REG5);
242 /* set all bits to 0 except bits 28 & 27 */
243 reg &= P_CTL_TIM_VMAIN_AV_MSK;
244 sky2_pci_write32(hw, PCI_DEV_REG5, reg);
245
246 sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
247
248 sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
249
250 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
251 reg = sky2_read32(hw, B2_GP_IO);
252 reg |= GLB_GPIO_STAT_RACE_DIS;
253 sky2_write32(hw, B2_GP_IO, reg);
254
255 sky2_read32(hw, B2_GP_IO);
256 }
257
258 /* Turn on "driver loaded" LED */
259 sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
260 }
261
sky2_power_aux(struct sky2_hw * hw)262 static void sky2_power_aux(struct sky2_hw *hw)
263 {
264 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
265 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
266 else
267 /* enable bits are inverted */
268 sky2_write8(hw, B2_Y2_CLK_GATE,
269 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
270 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
271 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
272
273 /* switch power to VAUX if supported and PME from D3cold */
274 if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
275 pci_pme_capable(hw->pdev, PCI_D3cold))
276 sky2_write8(hw, B0_POWER_CTRL,
277 (PC_VAUX_ENA | PC_VCC_ENA |
278 PC_VAUX_ON | PC_VCC_OFF));
279
280 /* turn off "driver loaded LED" */
281 sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
282 }
283
sky2_gmac_reset(struct sky2_hw * hw,unsigned port)284 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
285 {
286 u16 reg;
287
288 /* disable all GMAC IRQ's */
289 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
290
291 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
292 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
293 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
294 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
295
296 reg = gma_read16(hw, port, GM_RX_CTRL);
297 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
298 gma_write16(hw, port, GM_RX_CTRL, reg);
299 }
300
301 /* flow control to advertise bits */
302 static const u16 copper_fc_adv[] = {
303 [FC_NONE] = 0,
304 [FC_TX] = PHY_M_AN_ASP,
305 [FC_RX] = PHY_M_AN_PC,
306 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
307 };
308
309 /* flow control to advertise bits when using 1000BaseX */
310 static const u16 fiber_fc_adv[] = {
311 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
312 [FC_TX] = PHY_M_P_ASYM_MD_X,
313 [FC_RX] = PHY_M_P_SYM_MD_X,
314 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
315 };
316
317 /* flow control to GMA disable bits */
318 static const u16 gm_fc_disable[] = {
319 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
320 [FC_TX] = GM_GPCR_FC_RX_DIS,
321 [FC_RX] = GM_GPCR_FC_TX_DIS,
322 [FC_BOTH] = 0,
323 };
324
325
sky2_phy_init(struct sky2_hw * hw,unsigned port)326 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
327 {
328 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
329 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
330
331 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
332 !(hw->flags & SKY2_HW_NEWER_PHY)) {
333 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
334
335 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
336 PHY_M_EC_MAC_S_MSK);
337 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
338
339 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
340 if (hw->chip_id == CHIP_ID_YUKON_EC)
341 /* set downshift counter to 3x and enable downshift */
342 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
343 else
344 /* set master & slave downshift counter to 1x */
345 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
346
347 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
348 }
349
350 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
351 if (sky2_is_copper(hw)) {
352 if (!(hw->flags & SKY2_HW_GIGABIT)) {
353 /* enable automatic crossover */
354 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
355
356 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
357 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
358 u16 spec;
359
360 /* Enable Class A driver for FE+ A0 */
361 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
362 spec |= PHY_M_FESC_SEL_CL_A;
363 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
364 }
365 } else {
366 /* disable energy detect */
367 ctrl &= ~PHY_M_PC_EN_DET_MSK;
368
369 /* enable automatic crossover */
370 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
371
372 /* downshift on PHY 88E1112 and 88E1149 is changed */
373 if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
374 (hw->flags & SKY2_HW_NEWER_PHY)) {
375 /* set downshift counter to 3x and enable downshift */
376 ctrl &= ~PHY_M_PC_DSC_MSK;
377 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
378 }
379 }
380 } else {
381 /* workaround for deviation #4.88 (CRC errors) */
382 /* disable Automatic Crossover */
383
384 ctrl &= ~PHY_M_PC_MDIX_MSK;
385 }
386
387 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
388
389 /* special setup for PHY 88E1112 Fiber */
390 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
391 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
392
393 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
394 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
395 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
396 ctrl &= ~PHY_M_MAC_MD_MSK;
397 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
398 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
399
400 if (hw->pmd_type == 'P') {
401 /* select page 1 to access Fiber registers */
402 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
403
404 /* for SFP-module set SIGDET polarity to low */
405 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
406 ctrl |= PHY_M_FIB_SIGD_POL;
407 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
408 }
409
410 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
411 }
412
413 ctrl = PHY_CT_RESET;
414 ct1000 = 0;
415 adv = PHY_AN_CSMA;
416 reg = 0;
417
418 if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
419 if (sky2_is_copper(hw)) {
420 if (sky2->advertising & ADVERTISED_1000baseT_Full)
421 ct1000 |= PHY_M_1000C_AFD;
422 if (sky2->advertising & ADVERTISED_1000baseT_Half)
423 ct1000 |= PHY_M_1000C_AHD;
424 if (sky2->advertising & ADVERTISED_100baseT_Full)
425 adv |= PHY_M_AN_100_FD;
426 if (sky2->advertising & ADVERTISED_100baseT_Half)
427 adv |= PHY_M_AN_100_HD;
428 if (sky2->advertising & ADVERTISED_10baseT_Full)
429 adv |= PHY_M_AN_10_FD;
430 if (sky2->advertising & ADVERTISED_10baseT_Half)
431 adv |= PHY_M_AN_10_HD;
432
433 } else { /* special defines for FIBER (88E1040S only) */
434 if (sky2->advertising & ADVERTISED_1000baseT_Full)
435 adv |= PHY_M_AN_1000X_AFD;
436 if (sky2->advertising & ADVERTISED_1000baseT_Half)
437 adv |= PHY_M_AN_1000X_AHD;
438 }
439
440 /* Restart Auto-negotiation */
441 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
442 } else {
443 /* forced speed/duplex settings */
444 ct1000 = PHY_M_1000C_MSE;
445
446 /* Disable auto update for duplex flow control and duplex */
447 reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
448
449 switch (sky2->speed) {
450 case SPEED_1000:
451 ctrl |= PHY_CT_SP1000;
452 reg |= GM_GPCR_SPEED_1000;
453 break;
454 case SPEED_100:
455 ctrl |= PHY_CT_SP100;
456 reg |= GM_GPCR_SPEED_100;
457 break;
458 }
459
460 if (sky2->duplex == DUPLEX_FULL) {
461 reg |= GM_GPCR_DUP_FULL;
462 ctrl |= PHY_CT_DUP_MD;
463 } else if (sky2->speed < SPEED_1000)
464 sky2->flow_mode = FC_NONE;
465 }
466
467 if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
468 if (sky2_is_copper(hw))
469 adv |= copper_fc_adv[sky2->flow_mode];
470 else
471 adv |= fiber_fc_adv[sky2->flow_mode];
472 } else {
473 reg |= GM_GPCR_AU_FCT_DIS;
474 reg |= gm_fc_disable[sky2->flow_mode];
475
476 /* Forward pause packets to GMAC? */
477 if (sky2->flow_mode & FC_RX)
478 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
479 else
480 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
481 }
482
483 gma_write16(hw, port, GM_GP_CTRL, reg);
484
485 if (hw->flags & SKY2_HW_GIGABIT)
486 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
487
488 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
489 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
490
491 /* Setup Phy LED's */
492 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
493 ledover = 0;
494
495 switch (hw->chip_id) {
496 case CHIP_ID_YUKON_FE:
497 /* on 88E3082 these bits are at 11..9 (shifted left) */
498 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
499
500 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
501
502 /* delete ACT LED control bits */
503 ctrl &= ~PHY_M_FELP_LED1_MSK;
504 /* change ACT LED control to blink mode */
505 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
506 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
507 break;
508
509 case CHIP_ID_YUKON_FE_P:
510 /* Enable Link Partner Next Page */
511 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
512 ctrl |= PHY_M_PC_ENA_LIP_NP;
513
514 /* disable Energy Detect and enable scrambler */
515 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
516 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
517
518 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
519 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
520 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
521 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
522
523 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
524 break;
525
526 case CHIP_ID_YUKON_XL:
527 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
528
529 /* select page 3 to access LED control register */
530 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
531
532 /* set LED Function Control register */
533 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
534 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
535 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
536 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
537 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
538
539 /* set Polarity Control register */
540 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
541 (PHY_M_POLC_LS1_P_MIX(4) |
542 PHY_M_POLC_IS0_P_MIX(4) |
543 PHY_M_POLC_LOS_CTRL(2) |
544 PHY_M_POLC_INIT_CTRL(2) |
545 PHY_M_POLC_STA1_CTRL(2) |
546 PHY_M_POLC_STA0_CTRL(2)));
547
548 /* restore page register */
549 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
550 break;
551
552 case CHIP_ID_YUKON_EC_U:
553 case CHIP_ID_YUKON_EX:
554 case CHIP_ID_YUKON_SUPR:
555 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
556
557 /* select page 3 to access LED control register */
558 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
559
560 /* set LED Function Control register */
561 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
562 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
563 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
564 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
565 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
566
567 /* set Blink Rate in LED Timer Control Register */
568 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
569 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
570 /* restore page register */
571 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
572 break;
573
574 default:
575 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
576 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
577
578 /* turn off the Rx LED (LED_RX) */
579 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
580 }
581
582 if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
583 /* apply fixes in PHY AFE */
584 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
585
586 /* increase differential signal amplitude in 10BASE-T */
587 gm_phy_write(hw, port, 0x18, 0xaa99);
588 gm_phy_write(hw, port, 0x17, 0x2011);
589
590 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
591 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
592 gm_phy_write(hw, port, 0x18, 0xa204);
593 gm_phy_write(hw, port, 0x17, 0x2002);
594 }
595
596 /* set page register to 0 */
597 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
598 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
599 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
600 /* apply workaround for integrated resistors calibration */
601 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
602 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
603 } else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
604 /* apply fixes in PHY AFE */
605 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
606
607 /* apply RDAC termination workaround */
608 gm_phy_write(hw, port, 24, 0x2800);
609 gm_phy_write(hw, port, 23, 0x2001);
610
611 /* set page register back to 0 */
612 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
613 } else if (hw->chip_id != CHIP_ID_YUKON_EX &&
614 hw->chip_id < CHIP_ID_YUKON_SUPR) {
615 /* no effect on Yukon-XL */
616 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
617
618 if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
619 sky2->speed == SPEED_100) {
620 /* turn on 100 Mbps LED (LED_LINK100) */
621 ledover |= PHY_M_LED_MO_100(MO_LED_ON);
622 }
623
624 if (ledover)
625 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
626
627 } else if (hw->chip_id == CHIP_ID_YUKON_PRM &&
628 (sky2_read8(hw, B2_MAC_CFG) & 0xf) == 0x7) {
629 int i;
630 /* This a phy register setup workaround copied from vendor driver. */
631 static const struct {
632 u16 reg, val;
633 } eee_afe[] = {
634 { 0x156, 0x58ce },
635 { 0x153, 0x99eb },
636 { 0x141, 0x8064 },
637 /* { 0x155, 0x130b },*/
638 { 0x000, 0x0000 },
639 { 0x151, 0x8433 },
640 { 0x14b, 0x8c44 },
641 { 0x14c, 0x0f90 },
642 { 0x14f, 0x39aa },
643 /* { 0x154, 0x2f39 },*/
644 { 0x14d, 0xba33 },
645 { 0x144, 0x0048 },
646 { 0x152, 0x2010 },
647 /* { 0x158, 0x1223 },*/
648 { 0x140, 0x4444 },
649 { 0x154, 0x2f3b },
650 { 0x158, 0xb203 },
651 { 0x157, 0x2029 },
652 };
653
654 /* Start Workaround for OptimaEEE Rev.Z0 */
655 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fb);
656
657 gm_phy_write(hw, port, 1, 0x4099);
658 gm_phy_write(hw, port, 3, 0x1120);
659 gm_phy_write(hw, port, 11, 0x113c);
660 gm_phy_write(hw, port, 14, 0x8100);
661 gm_phy_write(hw, port, 15, 0x112a);
662 gm_phy_write(hw, port, 17, 0x1008);
663
664 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00fc);
665 gm_phy_write(hw, port, 1, 0x20b0);
666
667 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
668
669 for (i = 0; i < ARRAY_SIZE(eee_afe); i++) {
670 /* apply AFE settings */
671 gm_phy_write(hw, port, 17, eee_afe[i].val);
672 gm_phy_write(hw, port, 16, eee_afe[i].reg | 1u<<13);
673 }
674
675 /* End Workaround for OptimaEEE */
676 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
677
678 /* Enable 10Base-Te (EEE) */
679 if (hw->chip_id >= CHIP_ID_YUKON_PRM) {
680 reg = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
681 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL,
682 reg | PHY_M_10B_TE_ENABLE);
683 }
684 }
685
686 /* Enable phy interrupt on auto-negotiation complete (or link up) */
687 if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
688 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
689 else
690 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
691 }
692
693 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
694 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
695
sky2_phy_power_up(struct sky2_hw * hw,unsigned port)696 static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
697 {
698 u32 reg1;
699
700 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
701 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
702 reg1 &= ~phy_power[port];
703
704 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
705 reg1 |= coma_mode[port];
706
707 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
708 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
709 sky2_pci_read32(hw, PCI_DEV_REG1);
710
711 if (hw->chip_id == CHIP_ID_YUKON_FE)
712 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
713 else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
714 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
715 }
716
sky2_phy_power_down(struct sky2_hw * hw,unsigned port)717 static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
718 {
719 u32 reg1;
720 u16 ctrl;
721
722 /* release GPHY Control reset */
723 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
724
725 /* release GMAC reset */
726 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
727
728 if (hw->flags & SKY2_HW_NEWER_PHY) {
729 /* select page 2 to access MAC control register */
730 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
731
732 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
733 /* allow GMII Power Down */
734 ctrl &= ~PHY_M_MAC_GMIF_PUP;
735 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
736
737 /* set page register back to 0 */
738 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
739 }
740
741 /* setup General Purpose Control Register */
742 gma_write16(hw, port, GM_GP_CTRL,
743 GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
744 GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
745 GM_GPCR_AU_SPD_DIS);
746
747 if (hw->chip_id != CHIP_ID_YUKON_EC) {
748 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
749 /* select page 2 to access MAC control register */
750 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
751
752 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
753 /* enable Power Down */
754 ctrl |= PHY_M_PC_POW_D_ENA;
755 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
756
757 /* set page register back to 0 */
758 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
759 }
760
761 /* set IEEE compatible Power Down Mode (dev. #4.99) */
762 gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
763 }
764
765 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
766 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
767 reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
768 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
769 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
770 }
771
772 /* configure IPG according to used link speed */
sky2_set_ipg(struct sky2_port * sky2)773 static void sky2_set_ipg(struct sky2_port *sky2)
774 {
775 u16 reg;
776
777 reg = gma_read16(sky2->hw, sky2->port, GM_SERIAL_MODE);
778 reg &= ~GM_SMOD_IPG_MSK;
779 if (sky2->speed > SPEED_100)
780 reg |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
781 else
782 reg |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
783 gma_write16(sky2->hw, sky2->port, GM_SERIAL_MODE, reg);
784 }
785
786 /* Enable Rx/Tx */
sky2_enable_rx_tx(struct sky2_port * sky2)787 static void sky2_enable_rx_tx(struct sky2_port *sky2)
788 {
789 struct sky2_hw *hw = sky2->hw;
790 unsigned port = sky2->port;
791 u16 reg;
792
793 reg = gma_read16(hw, port, GM_GP_CTRL);
794 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
795 gma_write16(hw, port, GM_GP_CTRL, reg);
796 }
797
798 /* Force a renegotiation */
sky2_phy_reinit(struct sky2_port * sky2)799 static void sky2_phy_reinit(struct sky2_port *sky2)
800 {
801 spin_lock_bh(&sky2->phy_lock);
802 sky2_phy_init(sky2->hw, sky2->port);
803 sky2_enable_rx_tx(sky2);
804 spin_unlock_bh(&sky2->phy_lock);
805 }
806
807 /* Put device in state to listen for Wake On Lan */
sky2_wol_init(struct sky2_port * sky2)808 static void sky2_wol_init(struct sky2_port *sky2)
809 {
810 struct sky2_hw *hw = sky2->hw;
811 unsigned port = sky2->port;
812 enum flow_control save_mode;
813 u16 ctrl;
814
815 /* Bring hardware out of reset */
816 sky2_write16(hw, B0_CTST, CS_RST_CLR);
817 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
818
819 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
820 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
821
822 /* Force to 10/100
823 * sky2_reset will re-enable on resume
824 */
825 save_mode = sky2->flow_mode;
826 ctrl = sky2->advertising;
827
828 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
829 sky2->flow_mode = FC_NONE;
830
831 spin_lock_bh(&sky2->phy_lock);
832 sky2_phy_power_up(hw, port);
833 sky2_phy_init(hw, port);
834 spin_unlock_bh(&sky2->phy_lock);
835
836 sky2->flow_mode = save_mode;
837 sky2->advertising = ctrl;
838
839 /* Set GMAC to no flow control and auto update for speed/duplex */
840 gma_write16(hw, port, GM_GP_CTRL,
841 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
842 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
843
844 /* Set WOL address */
845 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
846 sky2->netdev->dev_addr, ETH_ALEN);
847
848 /* Turn on appropriate WOL control bits */
849 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
850 ctrl = 0;
851 if (sky2->wol & WAKE_PHY)
852 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
853 else
854 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
855
856 if (sky2->wol & WAKE_MAGIC)
857 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
858 else
859 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
860
861 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
862 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
863
864 /* Disable PiG firmware */
865 sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
866
867 /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */
868 if (legacy_pme) {
869 u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
870 reg1 |= PCI_Y2_PME_LEGACY;
871 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
872 }
873
874 /* block receiver */
875 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
876 sky2_read32(hw, B0_CTST);
877 }
878
sky2_set_tx_stfwd(struct sky2_hw * hw,unsigned port)879 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
880 {
881 struct net_device *dev = hw->dev[port];
882
883 if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
884 hw->chip_rev != CHIP_REV_YU_EX_A0) ||
885 hw->chip_id >= CHIP_ID_YUKON_FE_P) {
886 /* Yukon-Extreme B0 and further Extreme devices */
887 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
888 } else if (dev->mtu > ETH_DATA_LEN) {
889 /* set Tx GMAC FIFO Almost Empty Threshold */
890 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
891 (ECU_JUMBO_WM << 16) | ECU_AE_THR);
892
893 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
894 } else
895 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
896 }
897
sky2_mac_init(struct sky2_hw * hw,unsigned port)898 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
899 {
900 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
901 u16 reg;
902 u32 rx_reg;
903 int i;
904 const u8 *addr = hw->dev[port]->dev_addr;
905
906 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
907 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
908
909 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
910
911 if (hw->chip_id == CHIP_ID_YUKON_XL &&
912 hw->chip_rev == CHIP_REV_YU_XL_A0 &&
913 port == 1) {
914 /* WA DEV_472 -- looks like crossed wires on port 2 */
915 /* clear GMAC 1 Control reset */
916 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
917 do {
918 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
919 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
920 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
921 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
922 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
923 }
924
925 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
926
927 /* Enable Transmit FIFO Underrun */
928 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
929
930 spin_lock_bh(&sky2->phy_lock);
931 sky2_phy_power_up(hw, port);
932 sky2_phy_init(hw, port);
933 spin_unlock_bh(&sky2->phy_lock);
934
935 /* MIB clear */
936 reg = gma_read16(hw, port, GM_PHY_ADDR);
937 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
938
939 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
940 gma_read16(hw, port, i);
941 gma_write16(hw, port, GM_PHY_ADDR, reg);
942
943 /* transmit control */
944 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
945
946 /* receive control reg: unicast + multicast + no FCS */
947 gma_write16(hw, port, GM_RX_CTRL,
948 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
949
950 /* transmit flow control */
951 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
952
953 /* transmit parameter */
954 gma_write16(hw, port, GM_TX_PARAM,
955 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
956 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
957 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
958 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
959
960 /* serial mode register */
961 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
962 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF_1000);
963
964 if (hw->dev[port]->mtu > ETH_DATA_LEN)
965 reg |= GM_SMOD_JUMBO_ENA;
966
967 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
968 hw->chip_rev == CHIP_REV_YU_EC_U_B1)
969 reg |= GM_NEW_FLOW_CTRL;
970
971 gma_write16(hw, port, GM_SERIAL_MODE, reg);
972
973 /* virtual address for data */
974 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
975
976 /* physical address: used for pause frames */
977 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
978
979 /* ignore counter overflows */
980 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
981 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
982 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
983
984 /* Configure Rx MAC FIFO */
985 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
986 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
987 if (hw->chip_id == CHIP_ID_YUKON_EX ||
988 hw->chip_id == CHIP_ID_YUKON_FE_P)
989 rx_reg |= GMF_RX_OVER_ON;
990
991 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
992
993 if (hw->chip_id == CHIP_ID_YUKON_XL) {
994 /* Hardware errata - clear flush mask */
995 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
996 } else {
997 /* Flush Rx MAC FIFO on any flow control or error */
998 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
999 }
1000
1001 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
1002 reg = RX_GMF_FL_THR_DEF + 1;
1003 /* Another magic mystery workaround from sk98lin */
1004 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1005 hw->chip_rev == CHIP_REV_YU_FE2_A0)
1006 reg = 0x178;
1007 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
1008
1009 /* Configure Tx MAC FIFO */
1010 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
1011 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
1012
1013 /* On chips without ram buffer, pause is controlled by MAC level */
1014 if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
1015 /* Pause threshold is scaled by 8 in bytes */
1016 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1017 hw->chip_rev == CHIP_REV_YU_FE2_A0)
1018 reg = 1568 / 8;
1019 else
1020 reg = 1024 / 8;
1021 sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
1022 sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
1023
1024 sky2_set_tx_stfwd(hw, port);
1025 }
1026
1027 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
1028 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
1029 /* disable dynamic watermark */
1030 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
1031 reg &= ~TX_DYN_WM_ENA;
1032 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
1033 }
1034 }
1035
1036 /* Assign Ram Buffer allocation to queue */
sky2_ramset(struct sky2_hw * hw,u16 q,u32 start,u32 space)1037 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
1038 {
1039 u32 end;
1040
1041 /* convert from K bytes to qwords used for hw register */
1042 start *= 1024/8;
1043 space *= 1024/8;
1044 end = start + space - 1;
1045
1046 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
1047 sky2_write32(hw, RB_ADDR(q, RB_START), start);
1048 sky2_write32(hw, RB_ADDR(q, RB_END), end);
1049 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
1050 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
1051
1052 if (q == Q_R1 || q == Q_R2) {
1053 u32 tp = space - space/4;
1054
1055 /* On receive queue's set the thresholds
1056 * give receiver priority when > 3/4 full
1057 * send pause when down to 2K
1058 */
1059 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
1060 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
1061
1062 tp = space - 8192/8;
1063 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
1064 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
1065 } else {
1066 /* Enable store & forward on Tx queue's because
1067 * Tx FIFO is only 1K on Yukon
1068 */
1069 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
1070 }
1071
1072 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
1073 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
1074 }
1075
1076 /* Setup Bus Memory Interface */
sky2_qset(struct sky2_hw * hw,u16 q)1077 static void sky2_qset(struct sky2_hw *hw, u16 q)
1078 {
1079 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
1080 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
1081 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
1082 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
1083 }
1084
1085 /* Setup prefetch unit registers. This is the interface between
1086 * hardware and driver list elements
1087 */
sky2_prefetch_init(struct sky2_hw * hw,u32 qaddr,dma_addr_t addr,u32 last)1088 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
1089 dma_addr_t addr, u32 last)
1090 {
1091 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1092 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
1093 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
1094 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
1095 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
1096 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
1097
1098 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
1099 }
1100
get_tx_le(struct sky2_port * sky2,u16 * slot)1101 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
1102 {
1103 struct sky2_tx_le *le = sky2->tx_le + *slot;
1104
1105 *slot = RING_NEXT(*slot, sky2->tx_ring_size);
1106 le->ctrl = 0;
1107 return le;
1108 }
1109
tx_init(struct sky2_port * sky2)1110 static void tx_init(struct sky2_port *sky2)
1111 {
1112 struct sky2_tx_le *le;
1113
1114 sky2->tx_prod = sky2->tx_cons = 0;
1115 sky2->tx_tcpsum = 0;
1116 sky2->tx_last_mss = 0;
1117 netdev_reset_queue(sky2->netdev);
1118
1119 le = get_tx_le(sky2, &sky2->tx_prod);
1120 le->addr = 0;
1121 le->opcode = OP_ADDR64 | HW_OWNER;
1122 sky2->tx_last_upper = 0;
1123 }
1124
1125 /* Update chip's next pointer */
sky2_put_idx(struct sky2_hw * hw,unsigned q,u16 idx)1126 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
1127 {
1128 /* Make sure write' to descriptors are complete before we tell hardware */
1129 wmb();
1130 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
1131 }
1132
1133
sky2_next_rx(struct sky2_port * sky2)1134 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
1135 {
1136 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
1137 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
1138 le->ctrl = 0;
1139 return le;
1140 }
1141
sky2_get_rx_threshold(struct sky2_port * sky2)1142 static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
1143 {
1144 unsigned size;
1145
1146 /* Space needed for frame data + headers rounded up */
1147 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1148
1149 /* Stopping point for hardware truncation */
1150 return (size - 8) / sizeof(u32);
1151 }
1152
sky2_get_rx_data_size(struct sky2_port * sky2)1153 static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
1154 {
1155 struct rx_ring_info *re;
1156 unsigned size;
1157
1158 /* Space needed for frame data + headers rounded up */
1159 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1160
1161 sky2->rx_nfrags = size >> PAGE_SHIFT;
1162 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1163
1164 /* Compute residue after pages */
1165 size -= sky2->rx_nfrags << PAGE_SHIFT;
1166
1167 /* Optimize to handle small packets and headers */
1168 if (size < copybreak)
1169 size = copybreak;
1170 if (size < ETH_HLEN)
1171 size = ETH_HLEN;
1172
1173 return size;
1174 }
1175
1176 /* Build description to hardware for one receive segment */
sky2_rx_add(struct sky2_port * sky2,u8 op,dma_addr_t map,unsigned len)1177 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
1178 dma_addr_t map, unsigned len)
1179 {
1180 struct sky2_rx_le *le;
1181
1182 if (sizeof(dma_addr_t) > sizeof(u32)) {
1183 le = sky2_next_rx(sky2);
1184 le->addr = cpu_to_le32(upper_32_bits(map));
1185 le->opcode = OP_ADDR64 | HW_OWNER;
1186 }
1187
1188 le = sky2_next_rx(sky2);
1189 le->addr = cpu_to_le32(lower_32_bits(map));
1190 le->length = cpu_to_le16(len);
1191 le->opcode = op | HW_OWNER;
1192 }
1193
1194 /* Build description to hardware for one possibly fragmented skb */
sky2_rx_submit(struct sky2_port * sky2,const struct rx_ring_info * re)1195 static void sky2_rx_submit(struct sky2_port *sky2,
1196 const struct rx_ring_info *re)
1197 {
1198 int i;
1199
1200 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
1201
1202 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
1203 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
1204 }
1205
1206
sky2_rx_map_skb(struct pci_dev * pdev,struct rx_ring_info * re,unsigned size)1207 static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
1208 unsigned size)
1209 {
1210 struct sk_buff *skb = re->skb;
1211 int i;
1212
1213 re->data_addr = dma_map_single(&pdev->dev, skb->data, size,
1214 DMA_FROM_DEVICE);
1215 if (dma_mapping_error(&pdev->dev, re->data_addr))
1216 goto mapping_error;
1217
1218 dma_unmap_len_set(re, data_size, size);
1219
1220 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1221 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1222
1223 re->frag_addr[i] = skb_frag_dma_map(&pdev->dev, frag, 0,
1224 skb_frag_size(frag),
1225 DMA_FROM_DEVICE);
1226
1227 if (dma_mapping_error(&pdev->dev, re->frag_addr[i]))
1228 goto map_page_error;
1229 }
1230 return 0;
1231
1232 map_page_error:
1233 while (--i >= 0) {
1234 dma_unmap_page(&pdev->dev, re->frag_addr[i],
1235 skb_frag_size(&skb_shinfo(skb)->frags[i]),
1236 DMA_FROM_DEVICE);
1237 }
1238
1239 dma_unmap_single(&pdev->dev, re->data_addr,
1240 dma_unmap_len(re, data_size), DMA_FROM_DEVICE);
1241
1242 mapping_error:
1243 if (net_ratelimit())
1244 dev_warn(&pdev->dev, "%s: rx mapping error\n",
1245 skb->dev->name);
1246 return -EIO;
1247 }
1248
sky2_rx_unmap_skb(struct pci_dev * pdev,struct rx_ring_info * re)1249 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
1250 {
1251 struct sk_buff *skb = re->skb;
1252 int i;
1253
1254 dma_unmap_single(&pdev->dev, re->data_addr,
1255 dma_unmap_len(re, data_size), DMA_FROM_DEVICE);
1256
1257 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1258 dma_unmap_page(&pdev->dev, re->frag_addr[i],
1259 skb_frag_size(&skb_shinfo(skb)->frags[i]),
1260 DMA_FROM_DEVICE);
1261 }
1262
1263 /* Tell chip where to start receive checksum.
1264 * Actually has two checksums, but set both same to avoid possible byte
1265 * order problems.
1266 */
rx_set_checksum(struct sky2_port * sky2)1267 static void rx_set_checksum(struct sky2_port *sky2)
1268 {
1269 struct sky2_rx_le *le = sky2_next_rx(sky2);
1270
1271 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
1272 le->ctrl = 0;
1273 le->opcode = OP_TCPSTART | HW_OWNER;
1274
1275 sky2_write32(sky2->hw,
1276 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1277 (sky2->netdev->features & NETIF_F_RXCSUM)
1278 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
1279 }
1280
1281 /* Enable/disable receive hash calculation (RSS) */
rx_set_rss(struct net_device * dev,netdev_features_t features)1282 static void rx_set_rss(struct net_device *dev, netdev_features_t features)
1283 {
1284 struct sky2_port *sky2 = netdev_priv(dev);
1285 struct sky2_hw *hw = sky2->hw;
1286 int i, nkeys = 4;
1287
1288 /* Supports IPv6 and other modes */
1289 if (hw->flags & SKY2_HW_NEW_LE) {
1290 nkeys = 10;
1291 sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
1292 }
1293
1294 /* Program RSS initial values */
1295 if (features & NETIF_F_RXHASH) {
1296 u32 rss_key[10];
1297
1298 netdev_rss_key_fill(rss_key, sizeof(rss_key));
1299 for (i = 0; i < nkeys; i++)
1300 sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
1301 rss_key[i]);
1302
1303 /* Need to turn on (undocumented) flag to make hashing work */
1304 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
1305 RX_STFW_ENA);
1306
1307 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1308 BMU_ENA_RX_RSS_HASH);
1309 } else
1310 sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1311 BMU_DIS_RX_RSS_HASH);
1312 }
1313
1314 /*
1315 * The RX Stop command will not work for Yukon-2 if the BMU does not
1316 * reach the end of packet and since we can't make sure that we have
1317 * incoming data, we must reset the BMU while it is not doing a DMA
1318 * transfer. Since it is possible that the RX path is still active,
1319 * the RX RAM buffer will be stopped first, so any possible incoming
1320 * data will not trigger a DMA. After the RAM buffer is stopped, the
1321 * BMU is polled until any DMA in progress is ended and only then it
1322 * will be reset.
1323 */
sky2_rx_stop(struct sky2_port * sky2)1324 static void sky2_rx_stop(struct sky2_port *sky2)
1325 {
1326 struct sky2_hw *hw = sky2->hw;
1327 unsigned rxq = rxqaddr[sky2->port];
1328 int i;
1329
1330 /* disable the RAM Buffer receive queue */
1331 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
1332
1333 for (i = 0; i < 0xffff; i++)
1334 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
1335 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
1336 goto stopped;
1337
1338 netdev_warn(sky2->netdev, "receiver stop failed\n");
1339 stopped:
1340 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
1341
1342 /* reset the Rx prefetch unit */
1343 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1344 }
1345
1346 /* Clean out receive buffer area, assumes receiver hardware stopped */
sky2_rx_clean(struct sky2_port * sky2)1347 static void sky2_rx_clean(struct sky2_port *sky2)
1348 {
1349 unsigned i;
1350
1351 if (sky2->rx_le)
1352 memset(sky2->rx_le, 0, RX_LE_BYTES);
1353
1354 for (i = 0; i < sky2->rx_pending; i++) {
1355 struct rx_ring_info *re = sky2->rx_ring + i;
1356
1357 if (re->skb) {
1358 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1359 kfree_skb(re->skb);
1360 re->skb = NULL;
1361 }
1362 }
1363 }
1364
1365 /* Basic MII support */
sky2_ioctl(struct net_device * dev,struct ifreq * ifr,int cmd)1366 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1367 {
1368 struct mii_ioctl_data *data = if_mii(ifr);
1369 struct sky2_port *sky2 = netdev_priv(dev);
1370 struct sky2_hw *hw = sky2->hw;
1371 int err = -EOPNOTSUPP;
1372
1373 if (!netif_running(dev))
1374 return -ENODEV; /* Phy still in reset */
1375
1376 switch (cmd) {
1377 case SIOCGMIIPHY:
1378 data->phy_id = PHY_ADDR_MARV;
1379
1380 fallthrough;
1381 case SIOCGMIIREG: {
1382 u16 val = 0;
1383
1384 spin_lock_bh(&sky2->phy_lock);
1385 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1386 spin_unlock_bh(&sky2->phy_lock);
1387
1388 data->val_out = val;
1389 break;
1390 }
1391
1392 case SIOCSMIIREG:
1393 spin_lock_bh(&sky2->phy_lock);
1394 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1395 data->val_in);
1396 spin_unlock_bh(&sky2->phy_lock);
1397 break;
1398 }
1399 return err;
1400 }
1401
1402 #define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
1403
sky2_vlan_mode(struct net_device * dev,netdev_features_t features)1404 static void sky2_vlan_mode(struct net_device *dev, netdev_features_t features)
1405 {
1406 struct sky2_port *sky2 = netdev_priv(dev);
1407 struct sky2_hw *hw = sky2->hw;
1408 u16 port = sky2->port;
1409
1410 if (features & NETIF_F_HW_VLAN_CTAG_RX)
1411 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1412 RX_VLAN_STRIP_ON);
1413 else
1414 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1415 RX_VLAN_STRIP_OFF);
1416
1417 if (features & NETIF_F_HW_VLAN_CTAG_TX) {
1418 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1419 TX_VLAN_TAG_ON);
1420
1421 dev->vlan_features |= SKY2_VLAN_OFFLOADS;
1422 } else {
1423 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1424 TX_VLAN_TAG_OFF);
1425
1426 /* Can't do transmit offload of vlan without hw vlan */
1427 dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
1428 }
1429 }
1430
1431 /* Amount of required worst case padding in rx buffer */
sky2_rx_pad(const struct sky2_hw * hw)1432 static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
1433 {
1434 return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
1435 }
1436
1437 /*
1438 * Allocate an skb for receiving. If the MTU is large enough
1439 * make the skb non-linear with a fragment list of pages.
1440 */
sky2_rx_alloc(struct sky2_port * sky2,gfp_t gfp)1441 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, gfp_t gfp)
1442 {
1443 struct sk_buff *skb;
1444 int i;
1445
1446 skb = __netdev_alloc_skb(sky2->netdev,
1447 sky2->rx_data_size + sky2_rx_pad(sky2->hw),
1448 gfp);
1449 if (!skb)
1450 goto nomem;
1451
1452 if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
1453 unsigned char *start;
1454 /*
1455 * Workaround for a bug in FIFO that cause hang
1456 * if the FIFO if the receive buffer is not 64 byte aligned.
1457 * The buffer returned from netdev_alloc_skb is
1458 * aligned except if slab debugging is enabled.
1459 */
1460 start = PTR_ALIGN(skb->data, 8);
1461 skb_reserve(skb, start - skb->data);
1462 } else
1463 skb_reserve(skb, NET_IP_ALIGN);
1464
1465 for (i = 0; i < sky2->rx_nfrags; i++) {
1466 struct page *page = alloc_page(gfp);
1467
1468 if (!page)
1469 goto free_partial;
1470 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1471 }
1472
1473 return skb;
1474 free_partial:
1475 kfree_skb(skb);
1476 nomem:
1477 return NULL;
1478 }
1479
sky2_rx_update(struct sky2_port * sky2,unsigned rxq)1480 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
1481 {
1482 sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
1483 }
1484
sky2_alloc_rx_skbs(struct sky2_port * sky2)1485 static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
1486 {
1487 struct sky2_hw *hw = sky2->hw;
1488 unsigned i;
1489
1490 sky2->rx_data_size = sky2_get_rx_data_size(sky2);
1491
1492 /* Fill Rx ring */
1493 for (i = 0; i < sky2->rx_pending; i++) {
1494 struct rx_ring_info *re = sky2->rx_ring + i;
1495
1496 re->skb = sky2_rx_alloc(sky2, GFP_KERNEL);
1497 if (!re->skb)
1498 return -ENOMEM;
1499
1500 if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
1501 dev_kfree_skb(re->skb);
1502 re->skb = NULL;
1503 return -ENOMEM;
1504 }
1505 }
1506 return 0;
1507 }
1508
1509 /*
1510 * Setup receiver buffer pool.
1511 * Normal case this ends up creating one list element for skb
1512 * in the receive ring. Worst case if using large MTU and each
1513 * allocation falls on a different 64 bit region, that results
1514 * in 6 list elements per ring entry.
1515 * One element is used for checksum enable/disable, and one
1516 * extra to avoid wrap.
1517 */
sky2_rx_start(struct sky2_port * sky2)1518 static void sky2_rx_start(struct sky2_port *sky2)
1519 {
1520 struct sky2_hw *hw = sky2->hw;
1521 struct rx_ring_info *re;
1522 unsigned rxq = rxqaddr[sky2->port];
1523 unsigned i, thresh;
1524
1525 sky2->rx_put = sky2->rx_next = 0;
1526 sky2_qset(hw, rxq);
1527
1528 /* On PCI express lowering the watermark gives better performance */
1529 if (pci_is_pcie(hw->pdev))
1530 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1531
1532 /* These chips have no ram buffer?
1533 * MAC Rx RAM Read is controlled by hardware
1534 */
1535 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1536 hw->chip_rev > CHIP_REV_YU_EC_U_A0)
1537 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
1538
1539 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1540
1541 if (!(hw->flags & SKY2_HW_NEW_LE))
1542 rx_set_checksum(sky2);
1543
1544 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
1545 rx_set_rss(sky2->netdev, sky2->netdev->features);
1546
1547 /* submit Rx ring */
1548 for (i = 0; i < sky2->rx_pending; i++) {
1549 re = sky2->rx_ring + i;
1550 sky2_rx_submit(sky2, re);
1551 }
1552
1553 /*
1554 * The receiver hangs if it receives frames larger than the
1555 * packet buffer. As a workaround, truncate oversize frames, but
1556 * the register is limited to 9 bits, so if you do frames > 2052
1557 * you better get the MTU right!
1558 */
1559 thresh = sky2_get_rx_threshold(sky2);
1560 if (thresh > 0x1ff)
1561 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1562 else {
1563 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1564 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1565 }
1566
1567 /* Tell chip about available buffers */
1568 sky2_rx_update(sky2, rxq);
1569
1570 if (hw->chip_id == CHIP_ID_YUKON_EX ||
1571 hw->chip_id == CHIP_ID_YUKON_SUPR) {
1572 /*
1573 * Disable flushing of non ASF packets;
1574 * must be done after initializing the BMUs;
1575 * drivers without ASF support should do this too, otherwise
1576 * it may happen that they cannot run on ASF devices;
1577 * remember that the MAC FIFO isn't reset during initialization.
1578 */
1579 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
1580 }
1581
1582 if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
1583 /* Enable RX Home Address & Routing Header checksum fix */
1584 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
1585 RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
1586
1587 /* Enable TX Home Address & Routing Header checksum fix */
1588 sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
1589 TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
1590 }
1591 }
1592
sky2_alloc_buffers(struct sky2_port * sky2)1593 static int sky2_alloc_buffers(struct sky2_port *sky2)
1594 {
1595 struct sky2_hw *hw = sky2->hw;
1596
1597 /* must be power of 2 */
1598 sky2->tx_le = dma_alloc_coherent(&hw->pdev->dev,
1599 sky2->tx_ring_size * sizeof(struct sky2_tx_le),
1600 &sky2->tx_le_map, GFP_KERNEL);
1601 if (!sky2->tx_le)
1602 goto nomem;
1603
1604 sky2->tx_ring = kzalloc_objs(struct tx_ring_info, sky2->tx_ring_size);
1605 if (!sky2->tx_ring)
1606 goto nomem;
1607
1608 sky2->rx_le = dma_alloc_coherent(&hw->pdev->dev, RX_LE_BYTES,
1609 &sky2->rx_le_map, GFP_KERNEL);
1610 if (!sky2->rx_le)
1611 goto nomem;
1612
1613 sky2->rx_ring = kzalloc_objs(struct rx_ring_info, sky2->rx_pending);
1614 if (!sky2->rx_ring)
1615 goto nomem;
1616
1617 return sky2_alloc_rx_skbs(sky2);
1618 nomem:
1619 return -ENOMEM;
1620 }
1621
sky2_free_buffers(struct sky2_port * sky2)1622 static void sky2_free_buffers(struct sky2_port *sky2)
1623 {
1624 struct sky2_hw *hw = sky2->hw;
1625
1626 sky2_rx_clean(sky2);
1627
1628 if (sky2->rx_le) {
1629 dma_free_coherent(&hw->pdev->dev, RX_LE_BYTES, sky2->rx_le,
1630 sky2->rx_le_map);
1631 sky2->rx_le = NULL;
1632 }
1633 if (sky2->tx_le) {
1634 dma_free_coherent(&hw->pdev->dev,
1635 sky2->tx_ring_size * sizeof(struct sky2_tx_le),
1636 sky2->tx_le, sky2->tx_le_map);
1637 sky2->tx_le = NULL;
1638 }
1639 kfree(sky2->tx_ring);
1640 kfree(sky2->rx_ring);
1641
1642 sky2->tx_ring = NULL;
1643 sky2->rx_ring = NULL;
1644 }
1645
sky2_hw_up(struct sky2_port * sky2)1646 static void sky2_hw_up(struct sky2_port *sky2)
1647 {
1648 struct sky2_hw *hw = sky2->hw;
1649 unsigned port = sky2->port;
1650 u32 ramsize;
1651 int cap;
1652 struct net_device *otherdev = hw->dev[sky2->port^1];
1653
1654 tx_init(sky2);
1655
1656 /*
1657 * On dual port PCI-X card, there is an problem where status
1658 * can be received out of order due to split transactions
1659 */
1660 if (otherdev && netif_running(otherdev) &&
1661 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1662 u16 cmd;
1663
1664 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1665 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1666 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1667 }
1668
1669 sky2_mac_init(hw, port);
1670
1671 /* Register is number of 4K blocks on internal RAM buffer. */
1672 ramsize = sky2_read8(hw, B2_E_0) * 4;
1673 if (ramsize > 0) {
1674 u32 rxspace;
1675
1676 netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
1677 if (ramsize < 16)
1678 rxspace = ramsize / 2;
1679 else
1680 rxspace = 8 + (2*(ramsize - 16))/3;
1681
1682 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1683 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1684
1685 /* Make sure SyncQ is disabled */
1686 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1687 RB_RST_SET);
1688 }
1689
1690 sky2_qset(hw, txqaddr[port]);
1691
1692 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
1693 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
1694 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
1695
1696 /* Set almost empty threshold */
1697 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1698 hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1699 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
1700
1701 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1702 sky2->tx_ring_size - 1);
1703
1704 sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
1705 netdev_update_features(sky2->netdev);
1706
1707 sky2_rx_start(sky2);
1708 }
1709
1710 /* Setup device IRQ and enable napi to process */
sky2_setup_irq(struct sky2_hw * hw,const char * name)1711 static int sky2_setup_irq(struct sky2_hw *hw, const char *name)
1712 {
1713 struct pci_dev *pdev = hw->pdev;
1714 int err;
1715
1716 err = request_irq(pdev->irq, sky2_intr,
1717 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
1718 name, hw);
1719 if (err)
1720 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
1721 else {
1722 hw->flags |= SKY2_HW_IRQ_SETUP;
1723
1724 napi_enable(&hw->napi);
1725 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
1726 sky2_read32(hw, B0_IMSK);
1727 }
1728
1729 return err;
1730 }
1731
1732
1733 /* Bring up network interface. */
sky2_open(struct net_device * dev)1734 static int sky2_open(struct net_device *dev)
1735 {
1736 struct sky2_port *sky2 = netdev_priv(dev);
1737 struct sky2_hw *hw = sky2->hw;
1738 unsigned port = sky2->port;
1739 u32 imask;
1740 int err;
1741
1742 netif_carrier_off(dev);
1743
1744 err = sky2_alloc_buffers(sky2);
1745 if (err)
1746 goto err_out;
1747
1748 /* With single port, IRQ is setup when device is brought up */
1749 if (hw->ports == 1 && (err = sky2_setup_irq(hw, dev->name)))
1750 goto err_out;
1751
1752 sky2_hw_up(sky2);
1753
1754 /* Enable interrupts from phy/mac for port */
1755 imask = sky2_read32(hw, B0_IMSK);
1756
1757 if (hw->chip_id == CHIP_ID_YUKON_OPT ||
1758 hw->chip_id == CHIP_ID_YUKON_PRM ||
1759 hw->chip_id == CHIP_ID_YUKON_OP_2)
1760 imask |= Y2_IS_PHY_QLNK; /* enable PHY Quick Link */
1761
1762 imask |= portirq_msk[port];
1763 sky2_write32(hw, B0_IMSK, imask);
1764 sky2_read32(hw, B0_IMSK);
1765
1766 netif_info(sky2, ifup, dev, "enabling interface\n");
1767
1768 return 0;
1769
1770 err_out:
1771 sky2_free_buffers(sky2);
1772 return err;
1773 }
1774
1775 /* Modular subtraction in ring */
tx_inuse(const struct sky2_port * sky2)1776 static inline int tx_inuse(const struct sky2_port *sky2)
1777 {
1778 return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
1779 }
1780
1781 /* Number of list elements available for next tx */
tx_avail(const struct sky2_port * sky2)1782 static inline int tx_avail(const struct sky2_port *sky2)
1783 {
1784 return sky2->tx_pending - tx_inuse(sky2);
1785 }
1786
1787 /* Estimate of number of transmit list elements required */
tx_le_req(const struct sk_buff * skb)1788 static unsigned tx_le_req(const struct sk_buff *skb)
1789 {
1790 unsigned count;
1791
1792 count = (skb_shinfo(skb)->nr_frags + 1)
1793 * (sizeof(dma_addr_t) / sizeof(u32));
1794
1795 if (skb_is_gso(skb))
1796 ++count;
1797 else if (sizeof(dma_addr_t) == sizeof(u32))
1798 ++count; /* possible vlan */
1799
1800 if (skb->ip_summed == CHECKSUM_PARTIAL)
1801 ++count;
1802
1803 return count;
1804 }
1805
sky2_tx_unmap(struct pci_dev * pdev,struct tx_ring_info * re)1806 static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
1807 {
1808 if (re->flags & TX_MAP_SINGLE)
1809 dma_unmap_single(&pdev->dev, dma_unmap_addr(re, mapaddr),
1810 dma_unmap_len(re, maplen), DMA_TO_DEVICE);
1811 else if (re->flags & TX_MAP_PAGE)
1812 dma_unmap_page(&pdev->dev, dma_unmap_addr(re, mapaddr),
1813 dma_unmap_len(re, maplen), DMA_TO_DEVICE);
1814 re->flags = 0;
1815 }
1816
1817 /*
1818 * Put one packet in ring for transmit.
1819 * A single packet can generate multiple list elements, and
1820 * the number of ring elements will probably be less than the number
1821 * of list elements used.
1822 */
sky2_xmit_frame(struct sk_buff * skb,struct net_device * dev)1823 static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
1824 struct net_device *dev)
1825 {
1826 struct sky2_port *sky2 = netdev_priv(dev);
1827 struct sky2_hw *hw = sky2->hw;
1828 struct sky2_tx_le *le = NULL;
1829 struct tx_ring_info *re;
1830 unsigned i, len;
1831 dma_addr_t mapping;
1832 u32 upper;
1833 u16 slot;
1834 u16 mss;
1835 u8 ctrl;
1836
1837 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1838 return NETDEV_TX_BUSY;
1839
1840 len = skb_headlen(skb);
1841 mapping = dma_map_single(&hw->pdev->dev, skb->data, len,
1842 DMA_TO_DEVICE);
1843
1844 if (dma_mapping_error(&hw->pdev->dev, mapping))
1845 goto mapping_error;
1846
1847 slot = sky2->tx_prod;
1848 netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
1849 "tx queued, slot %u, len %d\n", slot, skb->len);
1850
1851 /* Send high bits if needed */
1852 upper = upper_32_bits(mapping);
1853 if (upper != sky2->tx_last_upper) {
1854 le = get_tx_le(sky2, &slot);
1855 le->addr = cpu_to_le32(upper);
1856 sky2->tx_last_upper = upper;
1857 le->opcode = OP_ADDR64 | HW_OWNER;
1858 }
1859
1860 /* Check for TCP Segmentation Offload */
1861 mss = skb_shinfo(skb)->gso_size;
1862 if (mss != 0) {
1863
1864 if (!(hw->flags & SKY2_HW_NEW_LE))
1865 mss += skb_tcp_all_headers(skb);
1866
1867 if (mss != sky2->tx_last_mss) {
1868 le = get_tx_le(sky2, &slot);
1869 le->addr = cpu_to_le32(mss);
1870
1871 if (hw->flags & SKY2_HW_NEW_LE)
1872 le->opcode = OP_MSS | HW_OWNER;
1873 else
1874 le->opcode = OP_LRGLEN | HW_OWNER;
1875 sky2->tx_last_mss = mss;
1876 }
1877 }
1878
1879 ctrl = 0;
1880
1881 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1882 if (skb_vlan_tag_present(skb)) {
1883 if (!le) {
1884 le = get_tx_le(sky2, &slot);
1885 le->addr = 0;
1886 le->opcode = OP_VLAN|HW_OWNER;
1887 } else
1888 le->opcode |= OP_VLAN;
1889 le->length = cpu_to_be16(skb_vlan_tag_get(skb));
1890 ctrl |= INS_VLAN;
1891 }
1892
1893 /* Handle TCP checksum offload */
1894 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1895 /* On Yukon EX (some versions) encoding change. */
1896 if (hw->flags & SKY2_HW_AUTO_TX_SUM)
1897 ctrl |= CALSUM; /* auto checksum */
1898 else {
1899 const unsigned offset = skb_transport_offset(skb);
1900 u32 tcpsum;
1901
1902 tcpsum = offset << 16; /* sum start */
1903 tcpsum |= offset + skb->csum_offset; /* sum write */
1904
1905 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1906 if (ip_hdr(skb)->protocol == IPPROTO_UDP)
1907 ctrl |= UDPTCP;
1908
1909 if (tcpsum != sky2->tx_tcpsum) {
1910 sky2->tx_tcpsum = tcpsum;
1911
1912 le = get_tx_le(sky2, &slot);
1913 le->addr = cpu_to_le32(tcpsum);
1914 le->length = 0; /* initial checksum value */
1915 le->ctrl = 1; /* one packet */
1916 le->opcode = OP_TCPLISW | HW_OWNER;
1917 }
1918 }
1919 }
1920
1921 re = sky2->tx_ring + slot;
1922 re->flags = TX_MAP_SINGLE;
1923 dma_unmap_addr_set(re, mapaddr, mapping);
1924 dma_unmap_len_set(re, maplen, len);
1925
1926 le = get_tx_le(sky2, &slot);
1927 le->addr = cpu_to_le32(lower_32_bits(mapping));
1928 le->length = cpu_to_le16(len);
1929 le->ctrl = ctrl;
1930 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1931
1932
1933 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1934 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1935
1936 mapping = skb_frag_dma_map(&hw->pdev->dev, frag, 0,
1937 skb_frag_size(frag), DMA_TO_DEVICE);
1938
1939 if (dma_mapping_error(&hw->pdev->dev, mapping))
1940 goto mapping_unwind;
1941
1942 upper = upper_32_bits(mapping);
1943 if (upper != sky2->tx_last_upper) {
1944 le = get_tx_le(sky2, &slot);
1945 le->addr = cpu_to_le32(upper);
1946 sky2->tx_last_upper = upper;
1947 le->opcode = OP_ADDR64 | HW_OWNER;
1948 }
1949
1950 re = sky2->tx_ring + slot;
1951 re->flags = TX_MAP_PAGE;
1952 dma_unmap_addr_set(re, mapaddr, mapping);
1953 dma_unmap_len_set(re, maplen, skb_frag_size(frag));
1954
1955 le = get_tx_le(sky2, &slot);
1956 le->addr = cpu_to_le32(lower_32_bits(mapping));
1957 le->length = cpu_to_le16(skb_frag_size(frag));
1958 le->ctrl = ctrl;
1959 le->opcode = OP_BUFFER | HW_OWNER;
1960 }
1961
1962 re->skb = skb;
1963 le->ctrl |= EOP;
1964
1965 sky2->tx_prod = slot;
1966
1967 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1968 netif_stop_queue(dev);
1969
1970 netdev_sent_queue(dev, skb->len);
1971 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1972
1973 return NETDEV_TX_OK;
1974
1975 mapping_unwind:
1976 for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
1977 re = sky2->tx_ring + i;
1978
1979 sky2_tx_unmap(hw->pdev, re);
1980 }
1981
1982 mapping_error:
1983 if (net_ratelimit())
1984 dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
1985 dev_kfree_skb_any(skb);
1986 return NETDEV_TX_OK;
1987 }
1988
1989 /*
1990 * Free ring elements from starting at tx_cons until "done"
1991 *
1992 * NB:
1993 * 1. The hardware will tell us about partial completion of multi-part
1994 * buffers so make sure not to free skb to early.
1995 * 2. This may run in parallel start_xmit because the it only
1996 * looks at the tail of the queue of FIFO (tx_cons), not
1997 * the head (tx_prod)
1998 */
sky2_tx_complete(struct sky2_port * sky2,u16 done)1999 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
2000 {
2001 struct net_device *dev = sky2->netdev;
2002 u16 idx;
2003 unsigned int bytes_compl = 0, pkts_compl = 0;
2004
2005 BUG_ON(done >= sky2->tx_ring_size);
2006
2007 for (idx = sky2->tx_cons; idx != done;
2008 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
2009 struct tx_ring_info *re = sky2->tx_ring + idx;
2010 struct sk_buff *skb = re->skb;
2011
2012 sky2_tx_unmap(sky2->hw->pdev, re);
2013
2014 if (skb) {
2015 netif_printk(sky2, tx_done, KERN_DEBUG, dev,
2016 "tx done %u\n", idx);
2017
2018 pkts_compl++;
2019 bytes_compl += skb->len;
2020
2021 re->skb = NULL;
2022 dev_kfree_skb_any(skb);
2023
2024 sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
2025 }
2026 }
2027
2028 sky2->tx_cons = idx;
2029 smp_mb();
2030
2031 netdev_completed_queue(dev, pkts_compl, bytes_compl);
2032
2033 u64_stats_update_begin(&sky2->tx_stats.syncp);
2034 sky2->tx_stats.packets += pkts_compl;
2035 sky2->tx_stats.bytes += bytes_compl;
2036 u64_stats_update_end(&sky2->tx_stats.syncp);
2037 }
2038
sky2_tx_reset(struct sky2_hw * hw,unsigned port)2039 static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
2040 {
2041 /* Disable Force Sync bit and Enable Alloc bit */
2042 sky2_write8(hw, SK_REG(port, TXA_CTRL),
2043 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
2044
2045 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
2046 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
2047 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
2048
2049 /* Reset the PCI FIFO of the async Tx queue */
2050 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
2051 BMU_RST_SET | BMU_FIFO_RST);
2052
2053 /* Reset the Tx prefetch units */
2054 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
2055 PREF_UNIT_RST_SET);
2056
2057 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
2058 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
2059
2060 sky2_read32(hw, B0_CTST);
2061 }
2062
sky2_hw_down(struct sky2_port * sky2)2063 static void sky2_hw_down(struct sky2_port *sky2)
2064 {
2065 struct sky2_hw *hw = sky2->hw;
2066 unsigned port = sky2->port;
2067 u16 ctrl;
2068
2069 /* Force flow control off */
2070 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2071
2072 /* Stop transmitter */
2073 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
2074 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
2075
2076 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
2077 RB_RST_SET | RB_DIS_OP_MD);
2078
2079 ctrl = gma_read16(hw, port, GM_GP_CTRL);
2080 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
2081 gma_write16(hw, port, GM_GP_CTRL, ctrl);
2082
2083 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
2084
2085 /* Workaround shared GMAC reset */
2086 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
2087 port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
2088 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
2089
2090 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
2091
2092 /* Force any delayed status interrupt and NAPI */
2093 sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
2094 sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
2095 sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
2096 sky2_read8(hw, STAT_ISR_TIMER_CTRL);
2097
2098 sky2_rx_stop(sky2);
2099
2100 spin_lock_bh(&sky2->phy_lock);
2101 sky2_phy_power_down(hw, port);
2102 spin_unlock_bh(&sky2->phy_lock);
2103
2104 sky2_tx_reset(hw, port);
2105
2106 /* Free any pending frames stuck in HW queue */
2107 sky2_tx_complete(sky2, sky2->tx_prod);
2108 }
2109
2110 /* Network shutdown */
sky2_close(struct net_device * dev)2111 static int sky2_close(struct net_device *dev)
2112 {
2113 struct sky2_port *sky2 = netdev_priv(dev);
2114 struct sky2_hw *hw = sky2->hw;
2115
2116 /* Never really got started! */
2117 if (!sky2->tx_le)
2118 return 0;
2119
2120 netif_info(sky2, ifdown, dev, "disabling interface\n");
2121
2122 if (hw->ports == 1) {
2123 sky2_write32(hw, B0_IMSK, 0);
2124 sky2_read32(hw, B0_IMSK);
2125
2126 napi_disable(&hw->napi);
2127 free_irq(hw->pdev->irq, hw);
2128 hw->flags &= ~SKY2_HW_IRQ_SETUP;
2129 } else {
2130 u32 imask;
2131
2132 /* Disable port IRQ */
2133 imask = sky2_read32(hw, B0_IMSK);
2134 imask &= ~portirq_msk[sky2->port];
2135 sky2_write32(hw, B0_IMSK, imask);
2136 sky2_read32(hw, B0_IMSK);
2137
2138 synchronize_irq(hw->pdev->irq);
2139 napi_synchronize(&hw->napi);
2140 }
2141
2142 sky2_hw_down(sky2);
2143
2144 sky2_free_buffers(sky2);
2145
2146 return 0;
2147 }
2148
sky2_phy_speed(const struct sky2_hw * hw,u16 aux)2149 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
2150 {
2151 if (hw->flags & SKY2_HW_FIBRE_PHY)
2152 return SPEED_1000;
2153
2154 if (!(hw->flags & SKY2_HW_GIGABIT)) {
2155 if (aux & PHY_M_PS_SPEED_100)
2156 return SPEED_100;
2157 else
2158 return SPEED_10;
2159 }
2160
2161 switch (aux & PHY_M_PS_SPEED_MSK) {
2162 case PHY_M_PS_SPEED_1000:
2163 return SPEED_1000;
2164 case PHY_M_PS_SPEED_100:
2165 return SPEED_100;
2166 default:
2167 return SPEED_10;
2168 }
2169 }
2170
sky2_link_up(struct sky2_port * sky2)2171 static void sky2_link_up(struct sky2_port *sky2)
2172 {
2173 struct sky2_hw *hw = sky2->hw;
2174 unsigned port = sky2->port;
2175 static const char *fc_name[] = {
2176 [FC_NONE] = "none",
2177 [FC_TX] = "tx",
2178 [FC_RX] = "rx",
2179 [FC_BOTH] = "both",
2180 };
2181
2182 sky2_set_ipg(sky2);
2183
2184 sky2_enable_rx_tx(sky2);
2185
2186 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
2187
2188 netif_carrier_on(sky2->netdev);
2189
2190 mod_timer(&hw->watchdog_timer, jiffies + 1);
2191
2192 /* Turn on link LED */
2193 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
2194 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
2195
2196 netif_info(sky2, link, sky2->netdev,
2197 "Link is up at %d Mbps, %s duplex, flow control %s\n",
2198 sky2->speed,
2199 sky2->duplex == DUPLEX_FULL ? "full" : "half",
2200 fc_name[sky2->flow_status]);
2201 }
2202
sky2_link_down(struct sky2_port * sky2)2203 static void sky2_link_down(struct sky2_port *sky2)
2204 {
2205 struct sky2_hw *hw = sky2->hw;
2206 unsigned port = sky2->port;
2207 u16 reg;
2208
2209 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
2210
2211 reg = gma_read16(hw, port, GM_GP_CTRL);
2212 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
2213 gma_write16(hw, port, GM_GP_CTRL, reg);
2214
2215 netif_carrier_off(sky2->netdev);
2216
2217 /* Turn off link LED */
2218 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
2219
2220 netif_info(sky2, link, sky2->netdev, "Link is down\n");
2221
2222 sky2_phy_init(hw, port);
2223 }
2224
sky2_flow(int rx,int tx)2225 static enum flow_control sky2_flow(int rx, int tx)
2226 {
2227 if (rx)
2228 return tx ? FC_BOTH : FC_RX;
2229 else
2230 return tx ? FC_TX : FC_NONE;
2231 }
2232
sky2_autoneg_done(struct sky2_port * sky2,u16 aux)2233 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
2234 {
2235 struct sky2_hw *hw = sky2->hw;
2236 unsigned port = sky2->port;
2237 u16 advert, lpa;
2238
2239 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
2240 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
2241 if (lpa & PHY_M_AN_RF) {
2242 netdev_err(sky2->netdev, "remote fault\n");
2243 return -1;
2244 }
2245
2246 if (!(aux & PHY_M_PS_SPDUP_RES)) {
2247 netdev_err(sky2->netdev, "speed/duplex mismatch\n");
2248 return -1;
2249 }
2250
2251 sky2->speed = sky2_phy_speed(hw, aux);
2252 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2253
2254 /* Since the pause result bits seem to in different positions on
2255 * different chips. look at registers.
2256 */
2257 if (hw->flags & SKY2_HW_FIBRE_PHY) {
2258 /* Shift for bits in fiber PHY */
2259 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
2260 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
2261
2262 if (advert & ADVERTISE_1000XPAUSE)
2263 advert |= ADVERTISE_PAUSE_CAP;
2264 if (advert & ADVERTISE_1000XPSE_ASYM)
2265 advert |= ADVERTISE_PAUSE_ASYM;
2266 if (lpa & LPA_1000XPAUSE)
2267 lpa |= LPA_PAUSE_CAP;
2268 if (lpa & LPA_1000XPAUSE_ASYM)
2269 lpa |= LPA_PAUSE_ASYM;
2270 }
2271
2272 sky2->flow_status = FC_NONE;
2273 if (advert & ADVERTISE_PAUSE_CAP) {
2274 if (lpa & LPA_PAUSE_CAP)
2275 sky2->flow_status = FC_BOTH;
2276 else if (advert & ADVERTISE_PAUSE_ASYM)
2277 sky2->flow_status = FC_RX;
2278 } else if (advert & ADVERTISE_PAUSE_ASYM) {
2279 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
2280 sky2->flow_status = FC_TX;
2281 }
2282
2283 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
2284 !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
2285 sky2->flow_status = FC_NONE;
2286
2287 if (sky2->flow_status & FC_TX)
2288 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
2289 else
2290 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
2291
2292 return 0;
2293 }
2294
2295 /* Interrupt from PHY */
sky2_phy_intr(struct sky2_hw * hw,unsigned port)2296 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
2297 {
2298 struct net_device *dev = hw->dev[port];
2299 struct sky2_port *sky2 = netdev_priv(dev);
2300 u16 istatus, phystat;
2301
2302 if (!netif_running(dev))
2303 return;
2304
2305 spin_lock(&sky2->phy_lock);
2306 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
2307 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
2308
2309 netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
2310 istatus, phystat);
2311
2312 if (istatus & PHY_M_IS_AN_COMPL) {
2313 if (sky2_autoneg_done(sky2, phystat) == 0 &&
2314 !netif_carrier_ok(dev))
2315 sky2_link_up(sky2);
2316 goto out;
2317 }
2318
2319 if (istatus & PHY_M_IS_LSP_CHANGE)
2320 sky2->speed = sky2_phy_speed(hw, phystat);
2321
2322 if (istatus & PHY_M_IS_DUP_CHANGE)
2323 sky2->duplex =
2324 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
2325
2326 if (istatus & PHY_M_IS_LST_CHANGE) {
2327 if (phystat & PHY_M_PS_LINK_UP)
2328 sky2_link_up(sky2);
2329 else
2330 sky2_link_down(sky2);
2331 }
2332 out:
2333 spin_unlock(&sky2->phy_lock);
2334 }
2335
2336 /* Special quick link interrupt (Yukon-2 Optima only) */
sky2_qlink_intr(struct sky2_hw * hw)2337 static void sky2_qlink_intr(struct sky2_hw *hw)
2338 {
2339 struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
2340 u32 imask;
2341 u16 phy;
2342
2343 /* disable irq */
2344 imask = sky2_read32(hw, B0_IMSK);
2345 imask &= ~Y2_IS_PHY_QLNK;
2346 sky2_write32(hw, B0_IMSK, imask);
2347
2348 /* reset PHY Link Detect */
2349 phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
2350 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2351 sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
2352 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2353
2354 sky2_link_up(sky2);
2355 }
2356
2357 /* Transmit timeout is only called if we are running, carrier is up
2358 * and tx queue is full (stopped).
2359 */
sky2_tx_timeout(struct net_device * dev,unsigned int txqueue)2360 static void sky2_tx_timeout(struct net_device *dev, unsigned int txqueue)
2361 {
2362 struct sky2_port *sky2 = netdev_priv(dev);
2363 struct sky2_hw *hw = sky2->hw;
2364
2365 netif_err(sky2, timer, dev, "tx timeout\n");
2366
2367 netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
2368 sky2->tx_cons, sky2->tx_prod,
2369 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
2370 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
2371
2372 /* can't restart safely under softirq */
2373 schedule_work(&hw->restart_work);
2374 }
2375
sky2_change_mtu(struct net_device * dev,int new_mtu)2376 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
2377 {
2378 struct sky2_port *sky2 = netdev_priv(dev);
2379 struct sky2_hw *hw = sky2->hw;
2380 unsigned port = sky2->port;
2381 int err;
2382 u16 ctl, mode;
2383 u32 imask;
2384
2385 if (!netif_running(dev)) {
2386 WRITE_ONCE(dev->mtu, new_mtu);
2387 netdev_update_features(dev);
2388 return 0;
2389 }
2390
2391 imask = sky2_read32(hw, B0_IMSK);
2392 sky2_write32(hw, B0_IMSK, 0);
2393 sky2_read32(hw, B0_IMSK);
2394
2395 netif_trans_update(dev); /* prevent tx timeout */
2396 napi_disable(&hw->napi);
2397 netif_tx_disable(dev);
2398
2399 synchronize_irq(hw->pdev->irq);
2400
2401 if (!(hw->flags & SKY2_HW_RAM_BUFFER))
2402 sky2_set_tx_stfwd(hw, port);
2403
2404 ctl = gma_read16(hw, port, GM_GP_CTRL);
2405 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
2406 sky2_rx_stop(sky2);
2407 sky2_rx_clean(sky2);
2408
2409 WRITE_ONCE(dev->mtu, new_mtu);
2410 netdev_update_features(dev);
2411
2412 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA;
2413 if (sky2->speed > SPEED_100)
2414 mode |= IPG_DATA_VAL(IPG_DATA_DEF_1000);
2415 else
2416 mode |= IPG_DATA_VAL(IPG_DATA_DEF_10_100);
2417
2418 if (dev->mtu > ETH_DATA_LEN)
2419 mode |= GM_SMOD_JUMBO_ENA;
2420
2421 gma_write16(hw, port, GM_SERIAL_MODE, mode);
2422
2423 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
2424
2425 err = sky2_alloc_rx_skbs(sky2);
2426 if (!err)
2427 sky2_rx_start(sky2);
2428 else
2429 sky2_rx_clean(sky2);
2430 sky2_write32(hw, B0_IMSK, imask);
2431
2432 sky2_read32(hw, B0_Y2_SP_LISR);
2433 napi_enable(&hw->napi);
2434
2435 if (err)
2436 dev_close(dev);
2437 else {
2438 gma_write16(hw, port, GM_GP_CTRL, ctl);
2439
2440 netif_wake_queue(dev);
2441 }
2442
2443 return err;
2444 }
2445
needs_copy(const struct rx_ring_info * re,unsigned length)2446 static inline bool needs_copy(const struct rx_ring_info *re,
2447 unsigned length)
2448 {
2449 #ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
2450 /* Some architectures need the IP header to be aligned */
2451 if (!IS_ALIGNED(re->data_addr + ETH_HLEN, sizeof(u32)))
2452 return true;
2453 #endif
2454 return length < copybreak;
2455 }
2456
2457 /* For small just reuse existing skb for next receive */
receive_copy(struct sky2_port * sky2,const struct rx_ring_info * re,unsigned length)2458 static struct sk_buff *receive_copy(struct sky2_port *sky2,
2459 const struct rx_ring_info *re,
2460 unsigned length)
2461 {
2462 struct sk_buff *skb;
2463
2464 skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
2465 if (likely(skb)) {
2466 dma_sync_single_for_cpu(&sky2->hw->pdev->dev, re->data_addr,
2467 length, DMA_FROM_DEVICE);
2468 skb_copy_from_linear_data(re->skb, skb->data, length);
2469 skb->ip_summed = re->skb->ip_summed;
2470 skb->csum = re->skb->csum;
2471 skb_copy_hash(skb, re->skb);
2472 __vlan_hwaccel_copy_tag(skb, re->skb);
2473
2474 dma_sync_single_for_device(&sky2->hw->pdev->dev,
2475 re->data_addr, length,
2476 DMA_FROM_DEVICE);
2477 __vlan_hwaccel_clear_tag(re->skb);
2478 skb_clear_hash(re->skb);
2479 re->skb->ip_summed = CHECKSUM_NONE;
2480 skb_put(skb, length);
2481 }
2482 return skb;
2483 }
2484
2485 /* Adjust length of skb with fragments to match received data */
skb_put_frags(struct sk_buff * skb,unsigned int hdr_space,unsigned int length)2486 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
2487 unsigned int length)
2488 {
2489 int i, num_frags;
2490 unsigned int size;
2491
2492 /* put header into skb */
2493 size = min(length, hdr_space);
2494 skb->tail += size;
2495 skb->len += size;
2496 length -= size;
2497
2498 num_frags = skb_shinfo(skb)->nr_frags;
2499 for (i = 0; i < num_frags; i++) {
2500 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2501
2502 if (length == 0) {
2503 /* don't need this page */
2504 __skb_frag_unref(frag, false);
2505 --skb_shinfo(skb)->nr_frags;
2506 } else {
2507 size = min(length, (unsigned) PAGE_SIZE);
2508
2509 skb_frag_size_set(frag, size);
2510 skb->data_len += size;
2511 skb->truesize += PAGE_SIZE;
2512 skb->len += size;
2513 length -= size;
2514 }
2515 }
2516 }
2517
2518 /* Normal packet - take skb from ring element and put in a new one */
receive_new(struct sky2_port * sky2,struct rx_ring_info * re,unsigned int length)2519 static struct sk_buff *receive_new(struct sky2_port *sky2,
2520 struct rx_ring_info *re,
2521 unsigned int length)
2522 {
2523 struct sk_buff *skb;
2524 struct rx_ring_info nre;
2525 unsigned hdr_space = sky2->rx_data_size;
2526
2527 nre.skb = sky2_rx_alloc(sky2, GFP_ATOMIC);
2528 if (unlikely(!nre.skb))
2529 goto nobuf;
2530
2531 if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
2532 goto nomap;
2533
2534 skb = re->skb;
2535 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2536 prefetch(skb->data);
2537 *re = nre;
2538
2539 if (skb_shinfo(skb)->nr_frags)
2540 skb_put_frags(skb, hdr_space, length);
2541 else
2542 skb_put(skb, length);
2543 return skb;
2544
2545 nomap:
2546 dev_kfree_skb(nre.skb);
2547 nobuf:
2548 return NULL;
2549 }
2550
2551 /*
2552 * Receive one packet.
2553 * For larger packets, get new buffer.
2554 */
sky2_receive(struct net_device * dev,u16 length,u32 status)2555 static struct sk_buff *sky2_receive(struct net_device *dev,
2556 u16 length, u32 status)
2557 {
2558 struct sky2_port *sky2 = netdev_priv(dev);
2559 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2560 struct sk_buff *skb = NULL;
2561 u16 count = (status & GMR_FS_LEN) >> 16;
2562
2563 netif_printk(sky2, rx_status, KERN_DEBUG, dev,
2564 "rx slot %u status 0x%x len %d\n",
2565 sky2->rx_next, status, length);
2566
2567 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2568 prefetch(sky2->rx_ring + sky2->rx_next);
2569
2570 if (skb_vlan_tag_present(re->skb))
2571 count -= VLAN_HLEN; /* Account for vlan tag */
2572
2573 /* This chip has hardware problems that generates bogus status.
2574 * So do only marginal checking and expect higher level protocols
2575 * to handle crap frames.
2576 */
2577 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
2578 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
2579 length != count)
2580 goto okay;
2581
2582 if (status & GMR_FS_ANY_ERR)
2583 goto error;
2584
2585 if (!(status & GMR_FS_RX_OK))
2586 goto resubmit;
2587
2588 /* if length reported by DMA does not match PHY, packet was truncated */
2589 if (length != count)
2590 goto error;
2591
2592 okay:
2593 if (needs_copy(re, length))
2594 skb = receive_copy(sky2, re, length);
2595 else
2596 skb = receive_new(sky2, re, length);
2597
2598 dev->stats.rx_dropped += (skb == NULL);
2599
2600 resubmit:
2601 sky2_rx_submit(sky2, re);
2602
2603 return skb;
2604
2605 error:
2606 ++dev->stats.rx_errors;
2607
2608 if (net_ratelimit())
2609 netif_info(sky2, rx_err, dev,
2610 "rx error, status 0x%x length %d\n", status, length);
2611
2612 goto resubmit;
2613 }
2614
2615 /* Transmit complete */
sky2_tx_done(struct net_device * dev,u16 last)2616 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2617 {
2618 struct sky2_port *sky2 = netdev_priv(dev);
2619
2620 if (netif_running(dev)) {
2621 sky2_tx_complete(sky2, last);
2622
2623 /* Wake unless it's detached, and called e.g. from sky2_close() */
2624 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
2625 netif_wake_queue(dev);
2626 }
2627 }
2628
sky2_skb_rx(const struct sky2_port * sky2,struct sk_buff * skb)2629 static inline void sky2_skb_rx(const struct sky2_port *sky2,
2630 struct sk_buff *skb)
2631 {
2632 if (skb->ip_summed == CHECKSUM_NONE)
2633 netif_receive_skb(skb);
2634 else
2635 napi_gro_receive(&sky2->hw->napi, skb);
2636 }
2637
sky2_rx_done(struct sky2_hw * hw,unsigned port,unsigned packets,unsigned bytes)2638 static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
2639 unsigned packets, unsigned bytes)
2640 {
2641 struct net_device *dev = hw->dev[port];
2642 struct sky2_port *sky2 = netdev_priv(dev);
2643
2644 if (packets == 0)
2645 return;
2646
2647 u64_stats_update_begin(&sky2->rx_stats.syncp);
2648 sky2->rx_stats.packets += packets;
2649 sky2->rx_stats.bytes += bytes;
2650 u64_stats_update_end(&sky2->rx_stats.syncp);
2651
2652 sky2->last_rx = jiffies;
2653 sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
2654 }
2655
sky2_rx_checksum(struct sky2_port * sky2,u32 status)2656 static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
2657 {
2658 /* If this happens then driver assuming wrong format for chip type */
2659 BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
2660
2661 /* Both checksum counters are programmed to start at
2662 * the same offset, so unless there is a problem they
2663 * should match. This failure is an early indication that
2664 * hardware receive checksumming won't work.
2665 */
2666 if (likely((u16)(status >> 16) == (u16)status)) {
2667 struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
2668 skb->ip_summed = CHECKSUM_COMPLETE;
2669 skb->csum = le16_to_cpu(status);
2670 } else {
2671 dev_notice(&sky2->hw->pdev->dev,
2672 "%s: receive checksum problem (status = %#x)\n",
2673 sky2->netdev->name, status);
2674
2675 /* Disable checksum offload
2676 * It will be reenabled on next ndo_set_features, but if it's
2677 * really broken, will get disabled again
2678 */
2679 sky2->netdev->features &= ~NETIF_F_RXCSUM;
2680 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2681 BMU_DIS_RX_CHKSUM);
2682 }
2683 }
2684
sky2_rx_tag(struct sky2_port * sky2,u16 length)2685 static void sky2_rx_tag(struct sky2_port *sky2, u16 length)
2686 {
2687 struct sk_buff *skb;
2688
2689 skb = sky2->rx_ring[sky2->rx_next].skb;
2690 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), be16_to_cpu(length));
2691 }
2692
sky2_rx_hash(struct sky2_port * sky2,u32 status)2693 static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
2694 {
2695 struct sk_buff *skb;
2696
2697 skb = sky2->rx_ring[sky2->rx_next].skb;
2698 skb_set_hash(skb, le32_to_cpu(status), PKT_HASH_TYPE_L3);
2699 }
2700
2701 /* Process status response ring */
sky2_status_intr(struct sky2_hw * hw,int to_do,u16 idx)2702 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
2703 {
2704 int work_done = 0;
2705 unsigned int total_bytes[2] = { 0 };
2706 unsigned int total_packets[2] = { 0 };
2707
2708 if (to_do <= 0)
2709 return work_done;
2710
2711 rmb();
2712 do {
2713 struct sky2_port *sky2;
2714 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2715 unsigned port;
2716 struct net_device *dev;
2717 struct sk_buff *skb;
2718 u32 status;
2719 u16 length;
2720 u8 opcode = le->opcode;
2721
2722 if (!(opcode & HW_OWNER))
2723 break;
2724
2725 hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size);
2726
2727 port = le->css & CSS_LINK_BIT;
2728 dev = hw->dev[port];
2729 sky2 = netdev_priv(dev);
2730 length = le16_to_cpu(le->length);
2731 status = le32_to_cpu(le->status);
2732
2733 le->opcode = 0;
2734 switch (opcode & ~HW_OWNER) {
2735 case OP_RXSTAT:
2736 total_packets[port]++;
2737 total_bytes[port] += length;
2738
2739 skb = sky2_receive(dev, length, status);
2740 if (!skb)
2741 break;
2742
2743 /* This chip reports checksum status differently */
2744 if (hw->flags & SKY2_HW_NEW_LE) {
2745 if ((dev->features & NETIF_F_RXCSUM) &&
2746 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
2747 (le->css & CSS_TCPUDPCSOK))
2748 skb->ip_summed = CHECKSUM_UNNECESSARY;
2749 else
2750 skb->ip_summed = CHECKSUM_NONE;
2751 }
2752
2753 skb->protocol = eth_type_trans(skb, dev);
2754 sky2_skb_rx(sky2, skb);
2755
2756 /* Stop after net poll weight */
2757 if (++work_done >= to_do)
2758 goto exit_loop;
2759 break;
2760
2761 case OP_RXVLAN:
2762 sky2_rx_tag(sky2, length);
2763 break;
2764
2765 case OP_RXCHKSVLAN:
2766 sky2_rx_tag(sky2, length);
2767 fallthrough;
2768 case OP_RXCHKS:
2769 if (likely(dev->features & NETIF_F_RXCSUM))
2770 sky2_rx_checksum(sky2, status);
2771 break;
2772
2773 case OP_RSS_HASH:
2774 sky2_rx_hash(sky2, status);
2775 break;
2776
2777 case OP_TXINDEXLE:
2778 /* TX index reports status for both ports */
2779 sky2_tx_done(hw->dev[0], status & 0xfff);
2780 if (hw->dev[1])
2781 sky2_tx_done(hw->dev[1],
2782 ((status >> 24) & 0xff)
2783 | (u16)(length & 0xf) << 8);
2784 break;
2785
2786 default:
2787 if (net_ratelimit())
2788 pr_warn("unknown status opcode 0x%x\n", opcode);
2789 }
2790 } while (hw->st_idx != idx);
2791
2792 /* Fully processed status ring so clear irq */
2793 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2794
2795 exit_loop:
2796 sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
2797 sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
2798
2799 return work_done;
2800 }
2801
sky2_hw_error(struct sky2_hw * hw,unsigned port,u32 status)2802 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2803 {
2804 struct net_device *dev = hw->dev[port];
2805
2806 if (net_ratelimit())
2807 netdev_info(dev, "hw error interrupt status 0x%x\n", status);
2808
2809 if (status & Y2_IS_PAR_RD1) {
2810 if (net_ratelimit())
2811 netdev_err(dev, "ram data read parity error\n");
2812 /* Clear IRQ */
2813 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2814 }
2815
2816 if (status & Y2_IS_PAR_WR1) {
2817 if (net_ratelimit())
2818 netdev_err(dev, "ram data write parity error\n");
2819
2820 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2821 }
2822
2823 if (status & Y2_IS_PAR_MAC1) {
2824 if (net_ratelimit())
2825 netdev_err(dev, "MAC parity error\n");
2826 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2827 }
2828
2829 if (status & Y2_IS_PAR_RX1) {
2830 if (net_ratelimit())
2831 netdev_err(dev, "RX parity error\n");
2832 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2833 }
2834
2835 if (status & Y2_IS_TCP_TXA1) {
2836 if (net_ratelimit())
2837 netdev_err(dev, "TCP segmentation error\n");
2838 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2839 }
2840 }
2841
sky2_hw_intr(struct sky2_hw * hw)2842 static void sky2_hw_intr(struct sky2_hw *hw)
2843 {
2844 struct pci_dev *pdev = hw->pdev;
2845 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2846 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2847
2848 status &= hwmsk;
2849
2850 if (status & Y2_IS_TIST_OV)
2851 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2852
2853 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2854 u16 pci_err;
2855
2856 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2857 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2858 if (net_ratelimit())
2859 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
2860 pci_err);
2861
2862 sky2_pci_write16(hw, PCI_STATUS,
2863 pci_err | PCI_STATUS_ERROR_BITS);
2864 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2865 }
2866
2867 if (status & Y2_IS_PCI_EXP) {
2868 /* PCI-Express uncorrectable Error occurred */
2869 u32 err;
2870
2871 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2872 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2873 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2874 0xfffffffful);
2875 if (net_ratelimit())
2876 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
2877
2878 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2879 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2880 }
2881
2882 if (status & Y2_HWE_L1_MASK)
2883 sky2_hw_error(hw, 0, status);
2884 status >>= 8;
2885 if (status & Y2_HWE_L1_MASK)
2886 sky2_hw_error(hw, 1, status);
2887 }
2888
sky2_mac_intr(struct sky2_hw * hw,unsigned port)2889 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2890 {
2891 struct net_device *dev = hw->dev[port];
2892 struct sky2_port *sky2 = netdev_priv(dev);
2893 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2894
2895 netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
2896
2897 if (status & GM_IS_RX_CO_OV)
2898 gma_read16(hw, port, GM_RX_IRQ_SRC);
2899
2900 if (status & GM_IS_TX_CO_OV)
2901 gma_read16(hw, port, GM_TX_IRQ_SRC);
2902
2903 if (status & GM_IS_RX_FF_OR) {
2904 ++dev->stats.rx_fifo_errors;
2905 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2906 }
2907
2908 if (status & GM_IS_TX_FF_UR) {
2909 ++dev->stats.tx_fifo_errors;
2910 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2911 }
2912 }
2913
2914 /* This should never happen it is a bug. */
sky2_le_error(struct sky2_hw * hw,unsigned port,u16 q)2915 static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
2916 {
2917 struct net_device *dev = hw->dev[port];
2918 u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
2919
2920 dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
2921 dev->name, (unsigned) q, (unsigned) idx,
2922 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
2923
2924 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
2925 }
2926
sky2_rx_hung(struct net_device * dev)2927 static int sky2_rx_hung(struct net_device *dev)
2928 {
2929 struct sky2_port *sky2 = netdev_priv(dev);
2930 struct sky2_hw *hw = sky2->hw;
2931 unsigned port = sky2->port;
2932 unsigned rxq = rxqaddr[port];
2933 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
2934 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
2935 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
2936 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
2937
2938 /* If idle and MAC or PCI is stuck */
2939 if (sky2->check.last == sky2->last_rx &&
2940 ((mac_rp == sky2->check.mac_rp &&
2941 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
2942 /* Check if the PCI RX hang */
2943 (fifo_rp == sky2->check.fifo_rp &&
2944 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
2945 netdev_printk(KERN_DEBUG, dev,
2946 "hung mac %d:%d fifo %d (%d:%d)\n",
2947 mac_lev, mac_rp, fifo_lev,
2948 fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
2949 return 1;
2950 } else {
2951 sky2->check.last = sky2->last_rx;
2952 sky2->check.mac_rp = mac_rp;
2953 sky2->check.mac_lev = mac_lev;
2954 sky2->check.fifo_rp = fifo_rp;
2955 sky2->check.fifo_lev = fifo_lev;
2956 return 0;
2957 }
2958 }
2959
sky2_watchdog(struct timer_list * t)2960 static void sky2_watchdog(struct timer_list *t)
2961 {
2962 struct sky2_hw *hw = timer_container_of(hw, t, watchdog_timer);
2963
2964 /* Check for lost IRQ once a second */
2965 if (sky2_read32(hw, B0_ISRC)) {
2966 napi_schedule(&hw->napi);
2967 } else {
2968 int i, active = 0;
2969
2970 for (i = 0; i < hw->ports; i++) {
2971 struct net_device *dev = hw->dev[i];
2972 if (!netif_running(dev))
2973 continue;
2974 ++active;
2975
2976 /* For chips with Rx FIFO, check if stuck */
2977 if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
2978 sky2_rx_hung(dev)) {
2979 netdev_info(dev, "receiver hang detected\n");
2980 schedule_work(&hw->restart_work);
2981 return;
2982 }
2983 }
2984
2985 if (active == 0)
2986 return;
2987 }
2988
2989 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
2990 }
2991
2992 /* Hardware/software error handling */
sky2_err_intr(struct sky2_hw * hw,u32 status)2993 static void sky2_err_intr(struct sky2_hw *hw, u32 status)
2994 {
2995 if (net_ratelimit())
2996 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
2997
2998 if (status & Y2_IS_HW_ERR)
2999 sky2_hw_intr(hw);
3000
3001 if (status & Y2_IS_IRQ_MAC1)
3002 sky2_mac_intr(hw, 0);
3003
3004 if (status & Y2_IS_IRQ_MAC2)
3005 sky2_mac_intr(hw, 1);
3006
3007 if (status & Y2_IS_CHK_RX1)
3008 sky2_le_error(hw, 0, Q_R1);
3009
3010 if (status & Y2_IS_CHK_RX2)
3011 sky2_le_error(hw, 1, Q_R2);
3012
3013 if (status & Y2_IS_CHK_TXA1)
3014 sky2_le_error(hw, 0, Q_XA1);
3015
3016 if (status & Y2_IS_CHK_TXA2)
3017 sky2_le_error(hw, 1, Q_XA2);
3018 }
3019
sky2_poll(struct napi_struct * napi,int work_limit)3020 static int sky2_poll(struct napi_struct *napi, int work_limit)
3021 {
3022 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
3023 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
3024 int work_done = 0;
3025 u16 idx;
3026
3027 if (unlikely(status & Y2_IS_ERROR))
3028 sky2_err_intr(hw, status);
3029
3030 if (status & Y2_IS_IRQ_PHY1)
3031 sky2_phy_intr(hw, 0);
3032
3033 if (status & Y2_IS_IRQ_PHY2)
3034 sky2_phy_intr(hw, 1);
3035
3036 if (status & Y2_IS_PHY_QLNK)
3037 sky2_qlink_intr(hw);
3038
3039 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
3040 work_done += sky2_status_intr(hw, work_limit - work_done, idx);
3041
3042 if (work_done >= work_limit)
3043 goto done;
3044 }
3045
3046 napi_complete_done(napi, work_done);
3047 sky2_read32(hw, B0_Y2_SP_LISR);
3048 done:
3049
3050 return work_done;
3051 }
3052
sky2_intr(int irq,void * dev_id)3053 static irqreturn_t sky2_intr(int irq, void *dev_id)
3054 {
3055 struct sky2_hw *hw = dev_id;
3056 u32 status;
3057
3058 /* Reading this mask interrupts as side effect */
3059 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
3060 if (status == 0 || status == ~0) {
3061 sky2_write32(hw, B0_Y2_SP_ICR, 2);
3062 return IRQ_NONE;
3063 }
3064
3065 prefetch(&hw->st_le[hw->st_idx]);
3066
3067 napi_schedule(&hw->napi);
3068
3069 return IRQ_HANDLED;
3070 }
3071
3072 #ifdef CONFIG_NET_POLL_CONTROLLER
sky2_netpoll(struct net_device * dev)3073 static void sky2_netpoll(struct net_device *dev)
3074 {
3075 struct sky2_port *sky2 = netdev_priv(dev);
3076
3077 napi_schedule(&sky2->hw->napi);
3078 }
3079 #endif
3080
3081 /* Chip internal frequency for clock calculations */
sky2_mhz(const struct sky2_hw * hw)3082 static u32 sky2_mhz(const struct sky2_hw *hw)
3083 {
3084 switch (hw->chip_id) {
3085 case CHIP_ID_YUKON_EC:
3086 case CHIP_ID_YUKON_EC_U:
3087 case CHIP_ID_YUKON_EX:
3088 case CHIP_ID_YUKON_SUPR:
3089 case CHIP_ID_YUKON_UL_2:
3090 case CHIP_ID_YUKON_OPT:
3091 case CHIP_ID_YUKON_PRM:
3092 case CHIP_ID_YUKON_OP_2:
3093 return 125;
3094
3095 case CHIP_ID_YUKON_FE:
3096 return 100;
3097
3098 case CHIP_ID_YUKON_FE_P:
3099 return 50;
3100
3101 case CHIP_ID_YUKON_XL:
3102 return 156;
3103
3104 default:
3105 BUG();
3106 }
3107 }
3108
sky2_us2clk(const struct sky2_hw * hw,u32 us)3109 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
3110 {
3111 return sky2_mhz(hw) * us;
3112 }
3113
sky2_clk2us(const struct sky2_hw * hw,u32 clk)3114 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
3115 {
3116 return clk / sky2_mhz(hw);
3117 }
3118
3119
sky2_init(struct sky2_hw * hw)3120 static int sky2_init(struct sky2_hw *hw)
3121 {
3122 u8 t8;
3123
3124 /* Enable all clocks and check for bad PCI access */
3125 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
3126
3127 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3128
3129 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
3130 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
3131
3132 switch (hw->chip_id) {
3133 case CHIP_ID_YUKON_XL:
3134 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
3135 if (hw->chip_rev < CHIP_REV_YU_XL_A2)
3136 hw->flags |= SKY2_HW_RSS_BROKEN;
3137 break;
3138
3139 case CHIP_ID_YUKON_EC_U:
3140 hw->flags = SKY2_HW_GIGABIT
3141 | SKY2_HW_NEWER_PHY
3142 | SKY2_HW_ADV_POWER_CTL;
3143 break;
3144
3145 case CHIP_ID_YUKON_EX:
3146 hw->flags = SKY2_HW_GIGABIT
3147 | SKY2_HW_NEWER_PHY
3148 | SKY2_HW_NEW_LE
3149 | SKY2_HW_ADV_POWER_CTL
3150 | SKY2_HW_RSS_CHKSUM;
3151
3152 /* New transmit checksum */
3153 if (hw->chip_rev != CHIP_REV_YU_EX_B0)
3154 hw->flags |= SKY2_HW_AUTO_TX_SUM;
3155 break;
3156
3157 case CHIP_ID_YUKON_EC:
3158 /* This rev is really old, and requires untested workarounds */
3159 if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
3160 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
3161 return -EOPNOTSUPP;
3162 }
3163 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
3164 break;
3165
3166 case CHIP_ID_YUKON_FE:
3167 hw->flags = SKY2_HW_RSS_BROKEN;
3168 break;
3169
3170 case CHIP_ID_YUKON_FE_P:
3171 hw->flags = SKY2_HW_NEWER_PHY
3172 | SKY2_HW_NEW_LE
3173 | SKY2_HW_AUTO_TX_SUM
3174 | SKY2_HW_ADV_POWER_CTL;
3175
3176 /* The workaround for status conflicts VLAN tag detection. */
3177 if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
3178 hw->flags |= SKY2_HW_VLAN_BROKEN | SKY2_HW_RSS_CHKSUM;
3179 break;
3180
3181 case CHIP_ID_YUKON_SUPR:
3182 hw->flags = SKY2_HW_GIGABIT
3183 | SKY2_HW_NEWER_PHY
3184 | SKY2_HW_NEW_LE
3185 | SKY2_HW_AUTO_TX_SUM
3186 | SKY2_HW_ADV_POWER_CTL;
3187
3188 if (hw->chip_rev == CHIP_REV_YU_SU_A0)
3189 hw->flags |= SKY2_HW_RSS_CHKSUM;
3190 break;
3191
3192 case CHIP_ID_YUKON_UL_2:
3193 hw->flags = SKY2_HW_GIGABIT
3194 | SKY2_HW_ADV_POWER_CTL;
3195 break;
3196
3197 case CHIP_ID_YUKON_OPT:
3198 case CHIP_ID_YUKON_PRM:
3199 case CHIP_ID_YUKON_OP_2:
3200 hw->flags = SKY2_HW_GIGABIT
3201 | SKY2_HW_NEW_LE
3202 | SKY2_HW_ADV_POWER_CTL;
3203 break;
3204
3205 default:
3206 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
3207 hw->chip_id);
3208 return -EOPNOTSUPP;
3209 }
3210
3211 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
3212 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
3213 hw->flags |= SKY2_HW_FIBRE_PHY;
3214
3215 hw->ports = 1;
3216 t8 = sky2_read8(hw, B2_Y2_HW_RES);
3217 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
3218 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
3219 ++hw->ports;
3220 }
3221
3222 if (sky2_read8(hw, B2_E_0))
3223 hw->flags |= SKY2_HW_RAM_BUFFER;
3224
3225 return 0;
3226 }
3227
sky2_reset(struct sky2_hw * hw)3228 static void sky2_reset(struct sky2_hw *hw)
3229 {
3230 struct pci_dev *pdev = hw->pdev;
3231 u16 status;
3232 int i;
3233 u32 hwe_mask = Y2_HWE_ALL_MASK;
3234
3235 /* disable ASF */
3236 if (hw->chip_id == CHIP_ID_YUKON_EX
3237 || hw->chip_id == CHIP_ID_YUKON_SUPR) {
3238 sky2_write32(hw, CPU_WDOG, 0);
3239 status = sky2_read16(hw, HCU_CCSR);
3240 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
3241 HCU_CCSR_UC_STATE_MSK);
3242 /*
3243 * CPU clock divider shouldn't be used because
3244 * - ASF firmware may malfunction
3245 * - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
3246 */
3247 status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
3248 sky2_write16(hw, HCU_CCSR, status);
3249 sky2_write32(hw, CPU_WDOG, 0);
3250 } else
3251 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
3252 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
3253
3254 /* do a SW reset */
3255 sky2_write8(hw, B0_CTST, CS_RST_SET);
3256 sky2_write8(hw, B0_CTST, CS_RST_CLR);
3257
3258 /* allow writes to PCI config */
3259 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3260
3261 /* clear PCI errors, if any */
3262 status = sky2_pci_read16(hw, PCI_STATUS);
3263 status |= PCI_STATUS_ERROR_BITS;
3264 sky2_pci_write16(hw, PCI_STATUS, status);
3265
3266 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
3267
3268 if (pci_is_pcie(pdev)) {
3269 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
3270 0xfffffffful);
3271
3272 /* If error bit is stuck on ignore it */
3273 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
3274 dev_info(&pdev->dev, "ignoring stuck error report bit\n");
3275 else
3276 hwe_mask |= Y2_IS_PCI_EXP;
3277 }
3278
3279 sky2_power_on(hw);
3280 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3281
3282 for (i = 0; i < hw->ports; i++) {
3283 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
3284 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
3285
3286 if (hw->chip_id == CHIP_ID_YUKON_EX ||
3287 hw->chip_id == CHIP_ID_YUKON_SUPR)
3288 sky2_write16(hw, SK_REG(i, GMAC_CTRL),
3289 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
3290 | GMC_BYP_RETR_ON);
3291
3292 }
3293
3294 if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
3295 /* enable MACSec clock gating */
3296 sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
3297 }
3298
3299 if (hw->chip_id == CHIP_ID_YUKON_OPT ||
3300 hw->chip_id == CHIP_ID_YUKON_PRM ||
3301 hw->chip_id == CHIP_ID_YUKON_OP_2) {
3302 u16 reg;
3303
3304 if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
3305 /* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
3306 sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
3307
3308 /* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
3309 reg = 10;
3310
3311 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3312 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3313 } else {
3314 /* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
3315 reg = 3;
3316 }
3317
3318 reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
3319 reg |= PSM_CONFIG_REG4_RST_PHY_LINK_DETECT;
3320
3321 /* reset PHY Link Detect */
3322 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
3323 sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
3324
3325 /* check if PSMv2 was running before */
3326 reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
3327 if (reg & PCI_EXP_LNKCTL_ASPMC)
3328 /* restore the PCIe Link Control register */
3329 sky2_pci_write16(hw, pdev->pcie_cap + PCI_EXP_LNKCTL,
3330 reg);
3331
3332 if (hw->chip_id == CHIP_ID_YUKON_PRM &&
3333 hw->chip_rev == CHIP_REV_YU_PRM_A0) {
3334 /* change PHY Interrupt polarity to low active */
3335 reg = sky2_read16(hw, GPHY_CTRL);
3336 sky2_write16(hw, GPHY_CTRL, reg | GPC_INTPOL);
3337
3338 /* adapt HW for low active PHY Interrupt */
3339 reg = sky2_read16(hw, Y2_CFG_SPC + PCI_LDO_CTRL);
3340 sky2_write16(hw, Y2_CFG_SPC + PCI_LDO_CTRL, reg | PHY_M_UNDOC1);
3341 }
3342
3343 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
3344
3345 /* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
3346 sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
3347 }
3348
3349 /* Clear I2C IRQ noise */
3350 sky2_write32(hw, B2_I2C_IRQ, 1);
3351
3352 /* turn off hardware timer (unused) */
3353 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
3354 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
3355
3356 /* Turn off descriptor polling */
3357 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
3358
3359 /* Turn off receive timestamp */
3360 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
3361 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
3362
3363 /* enable the Tx Arbiters */
3364 for (i = 0; i < hw->ports; i++)
3365 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
3366
3367 /* Initialize ram interface */
3368 for (i = 0; i < hw->ports; i++) {
3369 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
3370
3371 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
3372 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
3373 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
3374 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
3375 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
3376 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
3377 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
3378 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
3379 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
3380 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
3381 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
3382 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
3383 }
3384
3385 sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
3386
3387 for (i = 0; i < hw->ports; i++)
3388 sky2_gmac_reset(hw, i);
3389
3390 memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le));
3391 hw->st_idx = 0;
3392
3393 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
3394 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
3395
3396 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
3397 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
3398
3399 /* Set the list last index */
3400 sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1);
3401
3402 sky2_write16(hw, STAT_TX_IDX_TH, 10);
3403 sky2_write8(hw, STAT_FIFO_WM, 16);
3404
3405 /* set Status-FIFO ISR watermark */
3406 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
3407 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
3408 else
3409 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
3410
3411 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
3412 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
3413 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
3414
3415 /* enable status unit */
3416 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
3417
3418 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3419 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3420 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3421 }
3422
3423 /* Take device down (offline).
3424 * Equivalent to doing dev_stop() but this does not
3425 * inform upper layers of the transition.
3426 */
sky2_detach(struct net_device * dev)3427 static void sky2_detach(struct net_device *dev)
3428 {
3429 if (netif_running(dev)) {
3430 netif_tx_lock(dev);
3431 netif_device_detach(dev); /* stop txq */
3432 netif_tx_unlock(dev);
3433 sky2_close(dev);
3434 }
3435 }
3436
3437 /* Bring device back after doing sky2_detach */
sky2_reattach(struct net_device * dev)3438 static int sky2_reattach(struct net_device *dev)
3439 {
3440 int err = 0;
3441
3442 if (netif_running(dev)) {
3443 err = sky2_open(dev);
3444 if (err) {
3445 netdev_info(dev, "could not restart %d\n", err);
3446 dev_close(dev);
3447 } else {
3448 netif_device_attach(dev);
3449 sky2_set_multicast(dev);
3450 }
3451 }
3452
3453 return err;
3454 }
3455
sky2_all_down(struct sky2_hw * hw)3456 static void sky2_all_down(struct sky2_hw *hw)
3457 {
3458 int i;
3459
3460 if (hw->flags & SKY2_HW_IRQ_SETUP) {
3461 sky2_write32(hw, B0_IMSK, 0);
3462 sky2_read32(hw, B0_IMSK);
3463
3464 synchronize_irq(hw->pdev->irq);
3465 napi_disable(&hw->napi);
3466 }
3467
3468 for (i = 0; i < hw->ports; i++) {
3469 struct net_device *dev = hw->dev[i];
3470 struct sky2_port *sky2 = netdev_priv(dev);
3471
3472 if (!netif_running(dev))
3473 continue;
3474
3475 netif_carrier_off(dev);
3476 netif_tx_disable(dev);
3477 sky2_hw_down(sky2);
3478 }
3479 }
3480
sky2_all_up(struct sky2_hw * hw)3481 static void sky2_all_up(struct sky2_hw *hw)
3482 {
3483 u32 imask = Y2_IS_BASE;
3484 int i;
3485
3486 for (i = 0; i < hw->ports; i++) {
3487 struct net_device *dev = hw->dev[i];
3488 struct sky2_port *sky2 = netdev_priv(dev);
3489
3490 if (!netif_running(dev))
3491 continue;
3492
3493 sky2_hw_up(sky2);
3494 sky2_set_multicast(dev);
3495 imask |= portirq_msk[i];
3496 netif_wake_queue(dev);
3497 }
3498
3499 if (hw->flags & SKY2_HW_IRQ_SETUP) {
3500 sky2_write32(hw, B0_IMSK, imask);
3501 sky2_read32(hw, B0_IMSK);
3502 sky2_read32(hw, B0_Y2_SP_LISR);
3503 napi_enable(&hw->napi);
3504 }
3505 }
3506
sky2_restart(struct work_struct * work)3507 static void sky2_restart(struct work_struct *work)
3508 {
3509 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
3510
3511 rtnl_lock();
3512
3513 sky2_all_down(hw);
3514 sky2_reset(hw);
3515 sky2_all_up(hw);
3516
3517 rtnl_unlock();
3518 }
3519
sky2_wol_supported(const struct sky2_hw * hw)3520 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
3521 {
3522 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
3523 }
3524
sky2_get_wol(struct net_device * dev,struct ethtool_wolinfo * wol)3525 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3526 {
3527 const struct sky2_port *sky2 = netdev_priv(dev);
3528
3529 wol->supported = sky2_wol_supported(sky2->hw);
3530 wol->wolopts = sky2->wol;
3531 }
3532
sky2_set_wol(struct net_device * dev,struct ethtool_wolinfo * wol)3533 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
3534 {
3535 struct sky2_port *sky2 = netdev_priv(dev);
3536 struct sky2_hw *hw = sky2->hw;
3537 bool enable_wakeup = false;
3538 int i;
3539
3540 if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
3541 !device_can_wakeup(&hw->pdev->dev))
3542 return -EOPNOTSUPP;
3543
3544 sky2->wol = wol->wolopts;
3545
3546 for (i = 0; i < hw->ports; i++) {
3547 struct net_device *dev = hw->dev[i];
3548 struct sky2_port *sky2 = netdev_priv(dev);
3549
3550 if (sky2->wol)
3551 enable_wakeup = true;
3552 }
3553 device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup);
3554
3555 return 0;
3556 }
3557
sky2_supported_modes(const struct sky2_hw * hw)3558 static u32 sky2_supported_modes(const struct sky2_hw *hw)
3559 {
3560 if (sky2_is_copper(hw)) {
3561 u32 modes = SUPPORTED_10baseT_Half
3562 | SUPPORTED_10baseT_Full
3563 | SUPPORTED_100baseT_Half
3564 | SUPPORTED_100baseT_Full;
3565
3566 if (hw->flags & SKY2_HW_GIGABIT)
3567 modes |= SUPPORTED_1000baseT_Half
3568 | SUPPORTED_1000baseT_Full;
3569 return modes;
3570 } else
3571 return SUPPORTED_1000baseT_Half
3572 | SUPPORTED_1000baseT_Full;
3573 }
3574
sky2_get_link_ksettings(struct net_device * dev,struct ethtool_link_ksettings * cmd)3575 static int sky2_get_link_ksettings(struct net_device *dev,
3576 struct ethtool_link_ksettings *cmd)
3577 {
3578 struct sky2_port *sky2 = netdev_priv(dev);
3579 struct sky2_hw *hw = sky2->hw;
3580 u32 supported, advertising;
3581
3582 supported = sky2_supported_modes(hw);
3583 cmd->base.phy_address = PHY_ADDR_MARV;
3584 if (sky2_is_copper(hw)) {
3585 cmd->base.port = PORT_TP;
3586 cmd->base.speed = sky2->speed;
3587 supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
3588 } else {
3589 cmd->base.speed = SPEED_1000;
3590 cmd->base.port = PORT_FIBRE;
3591 supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
3592 }
3593
3594 advertising = sky2->advertising;
3595 cmd->base.autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
3596 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
3597 cmd->base.duplex = sky2->duplex;
3598
3599 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
3600 supported);
3601 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
3602 advertising);
3603
3604 return 0;
3605 }
3606
sky2_set_link_ksettings(struct net_device * dev,const struct ethtool_link_ksettings * cmd)3607 static int sky2_set_link_ksettings(struct net_device *dev,
3608 const struct ethtool_link_ksettings *cmd)
3609 {
3610 struct sky2_port *sky2 = netdev_priv(dev);
3611 const struct sky2_hw *hw = sky2->hw;
3612 u32 supported = sky2_supported_modes(hw);
3613 u32 new_advertising;
3614
3615 ethtool_convert_link_mode_to_legacy_u32(&new_advertising,
3616 cmd->link_modes.advertising);
3617
3618 if (cmd->base.autoneg == AUTONEG_ENABLE) {
3619 if (new_advertising & ~supported)
3620 return -EINVAL;
3621
3622 if (sky2_is_copper(hw))
3623 sky2->advertising = new_advertising |
3624 ADVERTISED_TP |
3625 ADVERTISED_Autoneg;
3626 else
3627 sky2->advertising = new_advertising |
3628 ADVERTISED_FIBRE |
3629 ADVERTISED_Autoneg;
3630
3631 sky2->flags |= SKY2_FLAG_AUTO_SPEED;
3632 sky2->duplex = -1;
3633 sky2->speed = -1;
3634 } else {
3635 u32 setting;
3636 u32 speed = cmd->base.speed;
3637
3638 switch (speed) {
3639 case SPEED_1000:
3640 if (cmd->base.duplex == DUPLEX_FULL)
3641 setting = SUPPORTED_1000baseT_Full;
3642 else if (cmd->base.duplex == DUPLEX_HALF)
3643 setting = SUPPORTED_1000baseT_Half;
3644 else
3645 return -EINVAL;
3646 break;
3647 case SPEED_100:
3648 if (cmd->base.duplex == DUPLEX_FULL)
3649 setting = SUPPORTED_100baseT_Full;
3650 else if (cmd->base.duplex == DUPLEX_HALF)
3651 setting = SUPPORTED_100baseT_Half;
3652 else
3653 return -EINVAL;
3654 break;
3655
3656 case SPEED_10:
3657 if (cmd->base.duplex == DUPLEX_FULL)
3658 setting = SUPPORTED_10baseT_Full;
3659 else if (cmd->base.duplex == DUPLEX_HALF)
3660 setting = SUPPORTED_10baseT_Half;
3661 else
3662 return -EINVAL;
3663 break;
3664 default:
3665 return -EINVAL;
3666 }
3667
3668 if ((setting & supported) == 0)
3669 return -EINVAL;
3670
3671 sky2->speed = speed;
3672 sky2->duplex = cmd->base.duplex;
3673 sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
3674 }
3675
3676 if (netif_running(dev)) {
3677 sky2_phy_reinit(sky2);
3678 sky2_set_multicast(dev);
3679 }
3680
3681 return 0;
3682 }
3683
sky2_get_drvinfo(struct net_device * dev,struct ethtool_drvinfo * info)3684 static void sky2_get_drvinfo(struct net_device *dev,
3685 struct ethtool_drvinfo *info)
3686 {
3687 struct sky2_port *sky2 = netdev_priv(dev);
3688
3689 strscpy(info->driver, DRV_NAME, sizeof(info->driver));
3690 strscpy(info->version, DRV_VERSION, sizeof(info->version));
3691 strscpy(info->bus_info, pci_name(sky2->hw->pdev),
3692 sizeof(info->bus_info));
3693 }
3694
3695 static const struct sky2_stat {
3696 char name[ETH_GSTRING_LEN];
3697 u16 offset;
3698 } sky2_stats[] = {
3699 { "tx_bytes", GM_TXO_OK_HI },
3700 { "rx_bytes", GM_RXO_OK_HI },
3701 { "tx_broadcast", GM_TXF_BC_OK },
3702 { "rx_broadcast", GM_RXF_BC_OK },
3703 { "tx_multicast", GM_TXF_MC_OK },
3704 { "rx_multicast", GM_RXF_MC_OK },
3705 { "tx_unicast", GM_TXF_UC_OK },
3706 { "rx_unicast", GM_RXF_UC_OK },
3707 { "tx_mac_pause", GM_TXF_MPAUSE },
3708 { "rx_mac_pause", GM_RXF_MPAUSE },
3709 { "collisions", GM_TXF_COL },
3710 { "late_collision",GM_TXF_LAT_COL },
3711 { "aborted", GM_TXF_ABO_COL },
3712 { "single_collisions", GM_TXF_SNG_COL },
3713 { "multi_collisions", GM_TXF_MUL_COL },
3714
3715 { "rx_short", GM_RXF_SHT },
3716 { "rx_runt", GM_RXE_FRAG },
3717 { "rx_64_byte_packets", GM_RXF_64B },
3718 { "rx_65_to_127_byte_packets", GM_RXF_127B },
3719 { "rx_128_to_255_byte_packets", GM_RXF_255B },
3720 { "rx_256_to_511_byte_packets", GM_RXF_511B },
3721 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
3722 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
3723 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
3724 { "rx_too_long", GM_RXF_LNG_ERR },
3725 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
3726 { "rx_jabber", GM_RXF_JAB_PKT },
3727 { "rx_fcs_error", GM_RXF_FCS_ERR },
3728
3729 { "tx_64_byte_packets", GM_TXF_64B },
3730 { "tx_65_to_127_byte_packets", GM_TXF_127B },
3731 { "tx_128_to_255_byte_packets", GM_TXF_255B },
3732 { "tx_256_to_511_byte_packets", GM_TXF_511B },
3733 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
3734 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
3735 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
3736 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
3737 };
3738
sky2_get_msglevel(struct net_device * netdev)3739 static u32 sky2_get_msglevel(struct net_device *netdev)
3740 {
3741 struct sky2_port *sky2 = netdev_priv(netdev);
3742 return sky2->msg_enable;
3743 }
3744
sky2_nway_reset(struct net_device * dev)3745 static int sky2_nway_reset(struct net_device *dev)
3746 {
3747 struct sky2_port *sky2 = netdev_priv(dev);
3748
3749 if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
3750 return -EINVAL;
3751
3752 sky2_phy_reinit(sky2);
3753 sky2_set_multicast(dev);
3754
3755 return 0;
3756 }
3757
sky2_phy_stats(struct sky2_port * sky2,u64 * data,unsigned count)3758 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
3759 {
3760 struct sky2_hw *hw = sky2->hw;
3761 unsigned port = sky2->port;
3762 int i;
3763
3764 data[0] = get_stats64(hw, port, GM_TXO_OK_LO);
3765 data[1] = get_stats64(hw, port, GM_RXO_OK_LO);
3766
3767 for (i = 2; i < count; i++)
3768 data[i] = get_stats32(hw, port, sky2_stats[i].offset);
3769 }
3770
sky2_set_msglevel(struct net_device * netdev,u32 value)3771 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
3772 {
3773 struct sky2_port *sky2 = netdev_priv(netdev);
3774 sky2->msg_enable = value;
3775 }
3776
sky2_get_sset_count(struct net_device * dev,int sset)3777 static int sky2_get_sset_count(struct net_device *dev, int sset)
3778 {
3779 switch (sset) {
3780 case ETH_SS_STATS:
3781 return ARRAY_SIZE(sky2_stats);
3782 default:
3783 return -EOPNOTSUPP;
3784 }
3785 }
3786
sky2_get_ethtool_stats(struct net_device * dev,struct ethtool_stats * stats,u64 * data)3787 static void sky2_get_ethtool_stats(struct net_device *dev,
3788 struct ethtool_stats *stats, u64 * data)
3789 {
3790 struct sky2_port *sky2 = netdev_priv(dev);
3791
3792 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
3793 }
3794
sky2_get_strings(struct net_device * dev,u32 stringset,u8 * data)3795 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
3796 {
3797 int i;
3798
3799 switch (stringset) {
3800 case ETH_SS_STATS:
3801 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
3802 ethtool_puts(&data, sky2_stats[i].name);
3803 break;
3804 }
3805 }
3806
sky2_set_mac_address(struct net_device * dev,void * p)3807 static int sky2_set_mac_address(struct net_device *dev, void *p)
3808 {
3809 struct sky2_port *sky2 = netdev_priv(dev);
3810 struct sky2_hw *hw = sky2->hw;
3811 unsigned port = sky2->port;
3812 const struct sockaddr *addr = p;
3813
3814 if (!is_valid_ether_addr(addr->sa_data))
3815 return -EADDRNOTAVAIL;
3816
3817 eth_hw_addr_set(dev, addr->sa_data);
3818 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
3819 dev->dev_addr, ETH_ALEN);
3820 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
3821 dev->dev_addr, ETH_ALEN);
3822
3823 /* virtual address for data */
3824 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
3825
3826 /* physical address: used for pause frames */
3827 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
3828
3829 return 0;
3830 }
3831
sky2_add_filter(u8 filter[8],const u8 * addr)3832 static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
3833 {
3834 u32 bit;
3835
3836 bit = ether_crc(ETH_ALEN, addr) & 63;
3837 filter[bit >> 3] |= 1 << (bit & 7);
3838 }
3839
sky2_set_multicast(struct net_device * dev)3840 static void sky2_set_multicast(struct net_device *dev)
3841 {
3842 struct sky2_port *sky2 = netdev_priv(dev);
3843 struct sky2_hw *hw = sky2->hw;
3844 unsigned port = sky2->port;
3845 struct netdev_hw_addr *ha;
3846 u16 reg;
3847 u8 filter[8];
3848 int rx_pause;
3849 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3850
3851 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3852 memset(filter, 0, sizeof(filter));
3853
3854 reg = gma_read16(hw, port, GM_RX_CTRL);
3855 reg |= GM_RXCR_UCF_ENA;
3856
3857 if (dev->flags & IFF_PROMISC) /* promiscuous */
3858 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3859 else if (dev->flags & IFF_ALLMULTI)
3860 memset(filter, 0xff, sizeof(filter));
3861 else if (netdev_mc_empty(dev) && !rx_pause)
3862 reg &= ~GM_RXCR_MCF_ENA;
3863 else {
3864 reg |= GM_RXCR_MCF_ENA;
3865
3866 if (rx_pause)
3867 sky2_add_filter(filter, pause_mc_addr);
3868
3869 netdev_for_each_mc_addr(ha, dev)
3870 sky2_add_filter(filter, ha->addr);
3871 }
3872
3873 gma_write16(hw, port, GM_MC_ADDR_H1,
3874 (u16) filter[0] | ((u16) filter[1] << 8));
3875 gma_write16(hw, port, GM_MC_ADDR_H2,
3876 (u16) filter[2] | ((u16) filter[3] << 8));
3877 gma_write16(hw, port, GM_MC_ADDR_H3,
3878 (u16) filter[4] | ((u16) filter[5] << 8));
3879 gma_write16(hw, port, GM_MC_ADDR_H4,
3880 (u16) filter[6] | ((u16) filter[7] << 8));
3881
3882 gma_write16(hw, port, GM_RX_CTRL, reg);
3883 }
3884
sky2_get_stats(struct net_device * dev,struct rtnl_link_stats64 * stats)3885 static void sky2_get_stats(struct net_device *dev,
3886 struct rtnl_link_stats64 *stats)
3887 {
3888 struct sky2_port *sky2 = netdev_priv(dev);
3889 struct sky2_hw *hw = sky2->hw;
3890 unsigned port = sky2->port;
3891 unsigned int start;
3892 u64 _bytes, _packets;
3893
3894 do {
3895 start = u64_stats_fetch_begin(&sky2->rx_stats.syncp);
3896 _bytes = sky2->rx_stats.bytes;
3897 _packets = sky2->rx_stats.packets;
3898 } while (u64_stats_fetch_retry(&sky2->rx_stats.syncp, start));
3899
3900 stats->rx_packets = _packets;
3901 stats->rx_bytes = _bytes;
3902
3903 do {
3904 start = u64_stats_fetch_begin(&sky2->tx_stats.syncp);
3905 _bytes = sky2->tx_stats.bytes;
3906 _packets = sky2->tx_stats.packets;
3907 } while (u64_stats_fetch_retry(&sky2->tx_stats.syncp, start));
3908
3909 stats->tx_packets = _packets;
3910 stats->tx_bytes = _bytes;
3911
3912 stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK)
3913 + get_stats32(hw, port, GM_RXF_BC_OK);
3914
3915 stats->collisions = get_stats32(hw, port, GM_TXF_COL);
3916
3917 stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR);
3918 stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR);
3919 stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT)
3920 + get_stats32(hw, port, GM_RXE_FRAG);
3921 stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV);
3922
3923 stats->rx_dropped = dev->stats.rx_dropped;
3924 stats->rx_fifo_errors = dev->stats.rx_fifo_errors;
3925 stats->tx_fifo_errors = dev->stats.tx_fifo_errors;
3926 }
3927
3928 /* Can have one global because blinking is controlled by
3929 * ethtool and that is always under RTNL mutex
3930 */
sky2_led(struct sky2_port * sky2,enum led_mode mode)3931 static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
3932 {
3933 struct sky2_hw *hw = sky2->hw;
3934 unsigned port = sky2->port;
3935
3936 spin_lock_bh(&sky2->phy_lock);
3937 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
3938 hw->chip_id == CHIP_ID_YUKON_EX ||
3939 hw->chip_id == CHIP_ID_YUKON_SUPR) {
3940 u16 pg;
3941 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3942 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3943
3944 switch (mode) {
3945 case MO_LED_OFF:
3946 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3947 PHY_M_LEDC_LOS_CTRL(8) |
3948 PHY_M_LEDC_INIT_CTRL(8) |
3949 PHY_M_LEDC_STA1_CTRL(8) |
3950 PHY_M_LEDC_STA0_CTRL(8));
3951 break;
3952 case MO_LED_ON:
3953 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3954 PHY_M_LEDC_LOS_CTRL(9) |
3955 PHY_M_LEDC_INIT_CTRL(9) |
3956 PHY_M_LEDC_STA1_CTRL(9) |
3957 PHY_M_LEDC_STA0_CTRL(9));
3958 break;
3959 case MO_LED_BLINK:
3960 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3961 PHY_M_LEDC_LOS_CTRL(0xa) |
3962 PHY_M_LEDC_INIT_CTRL(0xa) |
3963 PHY_M_LEDC_STA1_CTRL(0xa) |
3964 PHY_M_LEDC_STA0_CTRL(0xa));
3965 break;
3966 case MO_LED_NORM:
3967 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3968 PHY_M_LEDC_LOS_CTRL(1) |
3969 PHY_M_LEDC_INIT_CTRL(8) |
3970 PHY_M_LEDC_STA1_CTRL(7) |
3971 PHY_M_LEDC_STA0_CTRL(7));
3972 }
3973
3974 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3975 } else
3976 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3977 PHY_M_LED_MO_DUP(mode) |
3978 PHY_M_LED_MO_10(mode) |
3979 PHY_M_LED_MO_100(mode) |
3980 PHY_M_LED_MO_1000(mode) |
3981 PHY_M_LED_MO_RX(mode) |
3982 PHY_M_LED_MO_TX(mode));
3983
3984 spin_unlock_bh(&sky2->phy_lock);
3985 }
3986
3987 /* blink LED's for finding board */
sky2_set_phys_id(struct net_device * dev,enum ethtool_phys_id_state state)3988 static int sky2_set_phys_id(struct net_device *dev,
3989 enum ethtool_phys_id_state state)
3990 {
3991 struct sky2_port *sky2 = netdev_priv(dev);
3992
3993 switch (state) {
3994 case ETHTOOL_ID_ACTIVE:
3995 return 1; /* cycle on/off once per second */
3996 case ETHTOOL_ID_INACTIVE:
3997 sky2_led(sky2, MO_LED_NORM);
3998 break;
3999 case ETHTOOL_ID_ON:
4000 sky2_led(sky2, MO_LED_ON);
4001 break;
4002 case ETHTOOL_ID_OFF:
4003 sky2_led(sky2, MO_LED_OFF);
4004 break;
4005 }
4006
4007 return 0;
4008 }
4009
sky2_get_pauseparam(struct net_device * dev,struct ethtool_pauseparam * ecmd)4010 static void sky2_get_pauseparam(struct net_device *dev,
4011 struct ethtool_pauseparam *ecmd)
4012 {
4013 struct sky2_port *sky2 = netdev_priv(dev);
4014
4015 switch (sky2->flow_mode) {
4016 case FC_NONE:
4017 ecmd->tx_pause = ecmd->rx_pause = 0;
4018 break;
4019 case FC_TX:
4020 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
4021 break;
4022 case FC_RX:
4023 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
4024 break;
4025 case FC_BOTH:
4026 ecmd->tx_pause = ecmd->rx_pause = 1;
4027 }
4028
4029 ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
4030 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
4031 }
4032
sky2_set_pauseparam(struct net_device * dev,struct ethtool_pauseparam * ecmd)4033 static int sky2_set_pauseparam(struct net_device *dev,
4034 struct ethtool_pauseparam *ecmd)
4035 {
4036 struct sky2_port *sky2 = netdev_priv(dev);
4037
4038 if (ecmd->autoneg == AUTONEG_ENABLE)
4039 sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
4040 else
4041 sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
4042
4043 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
4044
4045 if (netif_running(dev))
4046 sky2_phy_reinit(sky2);
4047
4048 return 0;
4049 }
4050
sky2_get_coalesce(struct net_device * dev,struct ethtool_coalesce * ecmd,struct kernel_ethtool_coalesce * kernel_coal,struct netlink_ext_ack * extack)4051 static int sky2_get_coalesce(struct net_device *dev,
4052 struct ethtool_coalesce *ecmd,
4053 struct kernel_ethtool_coalesce *kernel_coal,
4054 struct netlink_ext_ack *extack)
4055 {
4056 struct sky2_port *sky2 = netdev_priv(dev);
4057 struct sky2_hw *hw = sky2->hw;
4058
4059 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
4060 ecmd->tx_coalesce_usecs = 0;
4061 else {
4062 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
4063 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
4064 }
4065 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
4066
4067 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
4068 ecmd->rx_coalesce_usecs = 0;
4069 else {
4070 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
4071 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
4072 }
4073 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
4074
4075 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
4076 ecmd->rx_coalesce_usecs_irq = 0;
4077 else {
4078 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
4079 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
4080 }
4081
4082 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
4083
4084 return 0;
4085 }
4086
4087 /* Note: this affect both ports */
sky2_set_coalesce(struct net_device * dev,struct ethtool_coalesce * ecmd,struct kernel_ethtool_coalesce * kernel_coal,struct netlink_ext_ack * extack)4088 static int sky2_set_coalesce(struct net_device *dev,
4089 struct ethtool_coalesce *ecmd,
4090 struct kernel_ethtool_coalesce *kernel_coal,
4091 struct netlink_ext_ack *extack)
4092 {
4093 struct sky2_port *sky2 = netdev_priv(dev);
4094 struct sky2_hw *hw = sky2->hw;
4095 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
4096
4097 if (ecmd->tx_coalesce_usecs > tmax ||
4098 ecmd->rx_coalesce_usecs > tmax ||
4099 ecmd->rx_coalesce_usecs_irq > tmax)
4100 return -EINVAL;
4101
4102 if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
4103 return -EINVAL;
4104 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
4105 return -EINVAL;
4106 if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
4107 return -EINVAL;
4108
4109 if (ecmd->tx_coalesce_usecs == 0)
4110 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
4111 else {
4112 sky2_write32(hw, STAT_TX_TIMER_INI,
4113 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
4114 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
4115 }
4116 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
4117
4118 if (ecmd->rx_coalesce_usecs == 0)
4119 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
4120 else {
4121 sky2_write32(hw, STAT_LEV_TIMER_INI,
4122 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
4123 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
4124 }
4125 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
4126
4127 if (ecmd->rx_coalesce_usecs_irq == 0)
4128 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
4129 else {
4130 sky2_write32(hw, STAT_ISR_TIMER_INI,
4131 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
4132 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
4133 }
4134 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
4135 return 0;
4136 }
4137
4138 /*
4139 * Hardware is limited to min of 128 and max of 2048 for ring size
4140 * and rounded up to next power of two
4141 * to avoid division in modulus calculation
4142 */
roundup_ring_size(unsigned long pending)4143 static unsigned long roundup_ring_size(unsigned long pending)
4144 {
4145 return max(128ul, roundup_pow_of_two(pending+1));
4146 }
4147
sky2_get_ringparam(struct net_device * dev,struct ethtool_ringparam * ering,struct kernel_ethtool_ringparam * kernel_ering,struct netlink_ext_ack * extack)4148 static void sky2_get_ringparam(struct net_device *dev,
4149 struct ethtool_ringparam *ering,
4150 struct kernel_ethtool_ringparam *kernel_ering,
4151 struct netlink_ext_ack *extack)
4152 {
4153 struct sky2_port *sky2 = netdev_priv(dev);
4154
4155 ering->rx_max_pending = RX_MAX_PENDING;
4156 ering->tx_max_pending = TX_MAX_PENDING;
4157
4158 ering->rx_pending = sky2->rx_pending;
4159 ering->tx_pending = sky2->tx_pending;
4160 }
4161
sky2_set_ringparam(struct net_device * dev,struct ethtool_ringparam * ering,struct kernel_ethtool_ringparam * kernel_ering,struct netlink_ext_ack * extack)4162 static int sky2_set_ringparam(struct net_device *dev,
4163 struct ethtool_ringparam *ering,
4164 struct kernel_ethtool_ringparam *kernel_ering,
4165 struct netlink_ext_ack *extack)
4166 {
4167 struct sky2_port *sky2 = netdev_priv(dev);
4168
4169 if (ering->rx_pending > RX_MAX_PENDING ||
4170 ering->rx_pending < 8 ||
4171 ering->tx_pending < TX_MIN_PENDING ||
4172 ering->tx_pending > TX_MAX_PENDING)
4173 return -EINVAL;
4174
4175 sky2_detach(dev);
4176
4177 sky2->rx_pending = ering->rx_pending;
4178 sky2->tx_pending = ering->tx_pending;
4179 sky2->tx_ring_size = roundup_ring_size(sky2->tx_pending);
4180
4181 return sky2_reattach(dev);
4182 }
4183
sky2_get_regs_len(struct net_device * dev)4184 static int sky2_get_regs_len(struct net_device *dev)
4185 {
4186 return 0x4000;
4187 }
4188
sky2_reg_access_ok(struct sky2_hw * hw,unsigned int b)4189 static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
4190 {
4191 /* This complicated switch statement is to make sure and
4192 * only access regions that are unreserved.
4193 * Some blocks are only valid on dual port cards.
4194 */
4195 switch (b) {
4196 /* second port */
4197 case 5: /* Tx Arbiter 2 */
4198 case 9: /* RX2 */
4199 case 14 ... 15: /* TX2 */
4200 case 17: case 19: /* Ram Buffer 2 */
4201 case 22 ... 23: /* Tx Ram Buffer 2 */
4202 case 25: /* Rx MAC Fifo 1 */
4203 case 27: /* Tx MAC Fifo 2 */
4204 case 31: /* GPHY 2 */
4205 case 40 ... 47: /* Pattern Ram 2 */
4206 case 52: case 54: /* TCP Segmentation 2 */
4207 case 112 ... 116: /* GMAC 2 */
4208 return hw->ports > 1;
4209
4210 case 0: /* Control */
4211 case 2: /* Mac address */
4212 case 4: /* Tx Arbiter 1 */
4213 case 7: /* PCI express reg */
4214 case 8: /* RX1 */
4215 case 12 ... 13: /* TX1 */
4216 case 16: case 18:/* Rx Ram Buffer 1 */
4217 case 20 ... 21: /* Tx Ram Buffer 1 */
4218 case 24: /* Rx MAC Fifo 1 */
4219 case 26: /* Tx MAC Fifo 1 */
4220 case 28 ... 29: /* Descriptor and status unit */
4221 case 30: /* GPHY 1*/
4222 case 32 ... 39: /* Pattern Ram 1 */
4223 case 48: case 50: /* TCP Segmentation 1 */
4224 case 56 ... 60: /* PCI space */
4225 case 80 ... 84: /* GMAC 1 */
4226 return 1;
4227
4228 default:
4229 return 0;
4230 }
4231 }
4232
4233 /*
4234 * Returns copy of control register region
4235 * Note: ethtool_get_regs always provides full size (16k) buffer
4236 */
sky2_get_regs(struct net_device * dev,struct ethtool_regs * regs,void * p)4237 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
4238 void *p)
4239 {
4240 const struct sky2_port *sky2 = netdev_priv(dev);
4241 const void __iomem *io = sky2->hw->regs;
4242 unsigned int b;
4243
4244 regs->version = 1;
4245
4246 for (b = 0; b < 128; b++) {
4247 /* skip poisonous diagnostic ram region in block 3 */
4248 if (b == 3)
4249 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
4250 else if (sky2_reg_access_ok(sky2->hw, b))
4251 memcpy_fromio(p, io, 128);
4252 else
4253 memset(p, 0, 128);
4254
4255 p += 128;
4256 io += 128;
4257 }
4258 }
4259
sky2_get_eeprom_len(struct net_device * dev)4260 static int sky2_get_eeprom_len(struct net_device *dev)
4261 {
4262 struct sky2_port *sky2 = netdev_priv(dev);
4263 struct sky2_hw *hw = sky2->hw;
4264 u16 reg2;
4265
4266 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
4267 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
4268 }
4269
sky2_get_eeprom(struct net_device * dev,struct ethtool_eeprom * eeprom,u8 * data)4270 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4271 u8 *data)
4272 {
4273 struct sky2_port *sky2 = netdev_priv(dev);
4274 int rc;
4275
4276 eeprom->magic = SKY2_EEPROM_MAGIC;
4277 rc = pci_read_vpd_any(sky2->hw->pdev, eeprom->offset, eeprom->len,
4278 data);
4279 if (rc < 0)
4280 return rc;
4281
4282 eeprom->len = rc;
4283
4284 return 0;
4285 }
4286
sky2_set_eeprom(struct net_device * dev,struct ethtool_eeprom * eeprom,u8 * data)4287 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
4288 u8 *data)
4289 {
4290 struct sky2_port *sky2 = netdev_priv(dev);
4291 int rc;
4292
4293 if (eeprom->magic != SKY2_EEPROM_MAGIC)
4294 return -EINVAL;
4295
4296 rc = pci_write_vpd_any(sky2->hw->pdev, eeprom->offset, eeprom->len,
4297 data);
4298
4299 return rc < 0 ? rc : 0;
4300 }
4301
sky2_fix_features(struct net_device * dev,netdev_features_t features)4302 static netdev_features_t sky2_fix_features(struct net_device *dev,
4303 netdev_features_t features)
4304 {
4305 const struct sky2_port *sky2 = netdev_priv(dev);
4306 const struct sky2_hw *hw = sky2->hw;
4307
4308 /* In order to do Jumbo packets on these chips, need to turn off the
4309 * transmit store/forward. Therefore checksum offload won't work.
4310 */
4311 if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U) {
4312 netdev_info(dev, "checksum offload not possible with jumbo frames\n");
4313 features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_CSUM_MASK);
4314 }
4315
4316 /* Some hardware requires receive checksum for RSS to work. */
4317 if ( (features & NETIF_F_RXHASH) &&
4318 !(features & NETIF_F_RXCSUM) &&
4319 (sky2->hw->flags & SKY2_HW_RSS_CHKSUM)) {
4320 netdev_info(dev, "receive hashing forces receive checksum\n");
4321 features |= NETIF_F_RXCSUM;
4322 }
4323
4324 return features;
4325 }
4326
sky2_set_features(struct net_device * dev,netdev_features_t features)4327 static int sky2_set_features(struct net_device *dev, netdev_features_t features)
4328 {
4329 struct sky2_port *sky2 = netdev_priv(dev);
4330 netdev_features_t changed = dev->features ^ features;
4331
4332 if ((changed & NETIF_F_RXCSUM) &&
4333 !(sky2->hw->flags & SKY2_HW_NEW_LE)) {
4334 sky2_write32(sky2->hw,
4335 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
4336 (features & NETIF_F_RXCSUM)
4337 ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
4338 }
4339
4340 if (changed & NETIF_F_RXHASH)
4341 rx_set_rss(dev, features);
4342
4343 if (changed & (NETIF_F_HW_VLAN_CTAG_TX|NETIF_F_HW_VLAN_CTAG_RX))
4344 sky2_vlan_mode(dev, features);
4345
4346 return 0;
4347 }
4348
4349 static const struct ethtool_ops sky2_ethtool_ops = {
4350 .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
4351 ETHTOOL_COALESCE_MAX_FRAMES |
4352 ETHTOOL_COALESCE_RX_USECS_IRQ |
4353 ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
4354 .get_drvinfo = sky2_get_drvinfo,
4355 .get_wol = sky2_get_wol,
4356 .set_wol = sky2_set_wol,
4357 .get_msglevel = sky2_get_msglevel,
4358 .set_msglevel = sky2_set_msglevel,
4359 .nway_reset = sky2_nway_reset,
4360 .get_regs_len = sky2_get_regs_len,
4361 .get_regs = sky2_get_regs,
4362 .get_link = ethtool_op_get_link,
4363 .get_eeprom_len = sky2_get_eeprom_len,
4364 .get_eeprom = sky2_get_eeprom,
4365 .set_eeprom = sky2_set_eeprom,
4366 .get_strings = sky2_get_strings,
4367 .get_coalesce = sky2_get_coalesce,
4368 .set_coalesce = sky2_set_coalesce,
4369 .get_ringparam = sky2_get_ringparam,
4370 .set_ringparam = sky2_set_ringparam,
4371 .get_pauseparam = sky2_get_pauseparam,
4372 .set_pauseparam = sky2_set_pauseparam,
4373 .set_phys_id = sky2_set_phys_id,
4374 .get_sset_count = sky2_get_sset_count,
4375 .get_ethtool_stats = sky2_get_ethtool_stats,
4376 .get_link_ksettings = sky2_get_link_ksettings,
4377 .set_link_ksettings = sky2_set_link_ksettings,
4378 };
4379
4380 #ifdef CONFIG_SKY2_DEBUG
4381
4382 static struct dentry *sky2_debug;
4383
sky2_debug_show(struct seq_file * seq,void * v)4384 static int sky2_debug_show(struct seq_file *seq, void *v)
4385 {
4386 struct net_device *dev = seq->private;
4387 const struct sky2_port *sky2 = netdev_priv(dev);
4388 struct sky2_hw *hw = sky2->hw;
4389 unsigned port = sky2->port;
4390 unsigned idx, last;
4391 int sop;
4392
4393 seq_printf(seq, "IRQ src=%x mask=%x control=%x\n",
4394 sky2_read32(hw, B0_ISRC),
4395 sky2_read32(hw, B0_IMSK),
4396 sky2_read32(hw, B0_Y2_SP_ICR));
4397
4398 if (!netif_running(dev)) {
4399 seq_puts(seq, "network not running\n");
4400 return 0;
4401 }
4402
4403 napi_disable(&hw->napi);
4404 last = sky2_read16(hw, STAT_PUT_IDX);
4405
4406 seq_printf(seq, "Status ring %u\n", hw->st_size);
4407 if (hw->st_idx == last)
4408 seq_puts(seq, "Status ring (empty)\n");
4409 else {
4410 seq_puts(seq, "Status ring\n");
4411 for (idx = hw->st_idx; idx != last && idx < hw->st_size;
4412 idx = RING_NEXT(idx, hw->st_size)) {
4413 const struct sky2_status_le *le = hw->st_le + idx;
4414 seq_printf(seq, "[%d] %#x %d %#x\n",
4415 idx, le->opcode, le->length, le->status);
4416 }
4417 seq_puts(seq, "\n");
4418 }
4419
4420 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
4421 sky2->tx_cons, sky2->tx_prod,
4422 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
4423 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
4424
4425 /* Dump contents of tx ring */
4426 sop = 1;
4427 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
4428 idx = RING_NEXT(idx, sky2->tx_ring_size)) {
4429 const struct sky2_tx_le *le = sky2->tx_le + idx;
4430 u32 a = le32_to_cpu(le->addr);
4431
4432 if (sop)
4433 seq_printf(seq, "%u:", idx);
4434 sop = 0;
4435
4436 switch (le->opcode & ~HW_OWNER) {
4437 case OP_ADDR64:
4438 seq_printf(seq, " %#x:", a);
4439 break;
4440 case OP_LRGLEN:
4441 seq_printf(seq, " mtu=%d", a);
4442 break;
4443 case OP_VLAN:
4444 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
4445 break;
4446 case OP_TCPLISW:
4447 seq_printf(seq, " csum=%#x", a);
4448 break;
4449 case OP_LARGESEND:
4450 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
4451 break;
4452 case OP_PACKET:
4453 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
4454 break;
4455 case OP_BUFFER:
4456 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
4457 break;
4458 default:
4459 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
4460 a, le16_to_cpu(le->length));
4461 }
4462
4463 if (le->ctrl & EOP) {
4464 seq_putc(seq, '\n');
4465 sop = 1;
4466 }
4467 }
4468
4469 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
4470 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
4471 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
4472 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
4473
4474 sky2_read32(hw, B0_Y2_SP_LISR);
4475 napi_enable(&hw->napi);
4476 return 0;
4477 }
4478 DEFINE_SHOW_ATTRIBUTE(sky2_debug);
4479
4480 /*
4481 * Use network device events to create/remove/rename
4482 * debugfs file entries
4483 */
sky2_device_event(struct notifier_block * unused,unsigned long event,void * ptr)4484 static int sky2_device_event(struct notifier_block *unused,
4485 unsigned long event, void *ptr)
4486 {
4487 struct net_device *dev = netdev_notifier_info_to_dev(ptr);
4488 struct sky2_port *sky2 = netdev_priv(dev);
4489
4490 if (dev->netdev_ops->ndo_open != sky2_open || !sky2_debug)
4491 return NOTIFY_DONE;
4492
4493 switch (event) {
4494 case NETDEV_CHANGENAME:
4495 debugfs_change_name(sky2->debugfs, "%s", dev->name);
4496 break;
4497
4498 case NETDEV_GOING_DOWN:
4499 if (sky2->debugfs) {
4500 netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
4501 debugfs_remove(sky2->debugfs);
4502 sky2->debugfs = NULL;
4503 }
4504 break;
4505
4506 case NETDEV_UP:
4507 sky2->debugfs = debugfs_create_file(dev->name, 0444,
4508 sky2_debug, dev,
4509 &sky2_debug_fops);
4510 if (IS_ERR(sky2->debugfs))
4511 sky2->debugfs = NULL;
4512 }
4513
4514 return NOTIFY_DONE;
4515 }
4516
4517 static struct notifier_block sky2_notifier = {
4518 .notifier_call = sky2_device_event,
4519 };
4520
4521
sky2_debug_init(void)4522 static __init void sky2_debug_init(void)
4523 {
4524 struct dentry *ent;
4525
4526 ent = debugfs_create_dir("sky2", NULL);
4527 if (IS_ERR(ent))
4528 return;
4529
4530 sky2_debug = ent;
4531 register_netdevice_notifier(&sky2_notifier);
4532 }
4533
sky2_debug_cleanup(void)4534 static __exit void sky2_debug_cleanup(void)
4535 {
4536 if (sky2_debug) {
4537 unregister_netdevice_notifier(&sky2_notifier);
4538 debugfs_remove(sky2_debug);
4539 sky2_debug = NULL;
4540 }
4541 }
4542
4543 #else
4544 #define sky2_debug_init()
4545 #define sky2_debug_cleanup()
4546 #endif
4547
4548 /* Two copies of network device operations to handle special case of
4549 * not allowing netpoll on second port
4550 */
4551 static const struct net_device_ops sky2_netdev_ops[2] = {
4552 {
4553 .ndo_open = sky2_open,
4554 .ndo_stop = sky2_close,
4555 .ndo_start_xmit = sky2_xmit_frame,
4556 .ndo_eth_ioctl = sky2_ioctl,
4557 .ndo_validate_addr = eth_validate_addr,
4558 .ndo_set_mac_address = sky2_set_mac_address,
4559 .ndo_set_rx_mode = sky2_set_multicast,
4560 .ndo_change_mtu = sky2_change_mtu,
4561 .ndo_fix_features = sky2_fix_features,
4562 .ndo_set_features = sky2_set_features,
4563 .ndo_tx_timeout = sky2_tx_timeout,
4564 .ndo_get_stats64 = sky2_get_stats,
4565 #ifdef CONFIG_NET_POLL_CONTROLLER
4566 .ndo_poll_controller = sky2_netpoll,
4567 #endif
4568 },
4569 {
4570 .ndo_open = sky2_open,
4571 .ndo_stop = sky2_close,
4572 .ndo_start_xmit = sky2_xmit_frame,
4573 .ndo_eth_ioctl = sky2_ioctl,
4574 .ndo_validate_addr = eth_validate_addr,
4575 .ndo_set_mac_address = sky2_set_mac_address,
4576 .ndo_set_rx_mode = sky2_set_multicast,
4577 .ndo_change_mtu = sky2_change_mtu,
4578 .ndo_fix_features = sky2_fix_features,
4579 .ndo_set_features = sky2_set_features,
4580 .ndo_tx_timeout = sky2_tx_timeout,
4581 .ndo_get_stats64 = sky2_get_stats,
4582 },
4583 };
4584
4585 /* Initialize network device */
sky2_init_netdev(struct sky2_hw * hw,unsigned port,int highmem,int wol)4586 static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
4587 int highmem, int wol)
4588 {
4589 struct sky2_port *sky2;
4590 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
4591 int ret;
4592
4593 if (!dev)
4594 return NULL;
4595
4596 SET_NETDEV_DEV(dev, &hw->pdev->dev);
4597 dev->irq = hw->pdev->irq;
4598 dev->ethtool_ops = &sky2_ethtool_ops;
4599 dev->watchdog_timeo = TX_WATCHDOG;
4600 dev->netdev_ops = &sky2_netdev_ops[port];
4601
4602 sky2 = netdev_priv(dev);
4603 sky2->netdev = dev;
4604 sky2->hw = hw;
4605 sky2->msg_enable = netif_msg_init(debug, default_msg);
4606
4607 u64_stats_init(&sky2->tx_stats.syncp);
4608 u64_stats_init(&sky2->rx_stats.syncp);
4609
4610 /* Auto speed and flow control */
4611 sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
4612 if (hw->chip_id != CHIP_ID_YUKON_XL)
4613 dev->hw_features |= NETIF_F_RXCSUM;
4614
4615 sky2->flow_mode = FC_BOTH;
4616
4617 sky2->duplex = -1;
4618 sky2->speed = -1;
4619 sky2->advertising = sky2_supported_modes(hw);
4620 sky2->wol = wol;
4621
4622 spin_lock_init(&sky2->phy_lock);
4623
4624 sky2->tx_pending = TX_DEF_PENDING;
4625 sky2->tx_ring_size = roundup_ring_size(TX_DEF_PENDING);
4626 sky2->rx_pending = RX_DEF_PENDING;
4627
4628 hw->dev[port] = dev;
4629
4630 sky2->port = port;
4631
4632 dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
4633
4634 if (highmem)
4635 dev->features |= NETIF_F_HIGHDMA;
4636
4637 /* Enable receive hashing unless hardware is known broken */
4638 if (!(hw->flags & SKY2_HW_RSS_BROKEN))
4639 dev->hw_features |= NETIF_F_RXHASH;
4640
4641 if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
4642 dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX |
4643 NETIF_F_HW_VLAN_CTAG_RX;
4644 dev->vlan_features |= SKY2_VLAN_OFFLOADS;
4645 }
4646
4647 dev->features |= dev->hw_features;
4648
4649 /* MTU range: 60 - 1500 or 9000 */
4650 dev->min_mtu = ETH_ZLEN;
4651 if (hw->chip_id == CHIP_ID_YUKON_FE ||
4652 hw->chip_id == CHIP_ID_YUKON_FE_P)
4653 dev->max_mtu = ETH_DATA_LEN;
4654 else
4655 dev->max_mtu = ETH_JUMBO_MTU;
4656
4657 /* try to get mac address in the following order:
4658 * 1) from device tree data
4659 * 2) from internal registers set by bootloader
4660 */
4661 ret = of_get_ethdev_address(hw->pdev->dev.of_node, dev);
4662 if (ret) {
4663 u8 addr[ETH_ALEN];
4664
4665 memcpy_fromio(addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
4666 eth_hw_addr_set(dev, addr);
4667 }
4668
4669 /* if the address is invalid, use a random value */
4670 if (!is_valid_ether_addr(dev->dev_addr)) {
4671 struct sockaddr sa = { AF_UNSPEC };
4672
4673 dev_warn(&hw->pdev->dev, "Invalid MAC address, defaulting to random\n");
4674 eth_hw_addr_random(dev);
4675 memcpy(sa.sa_data, dev->dev_addr, ETH_ALEN);
4676 if (sky2_set_mac_address(dev, &sa))
4677 dev_warn(&hw->pdev->dev, "Failed to set MAC address.\n");
4678 }
4679
4680 return dev;
4681 }
4682
sky2_show_addr(struct net_device * dev)4683 static void sky2_show_addr(struct net_device *dev)
4684 {
4685 const struct sky2_port *sky2 = netdev_priv(dev);
4686
4687 netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
4688 }
4689
4690 /* Handle software interrupt used during MSI test */
sky2_test_intr(int irq,void * dev_id)4691 static irqreturn_t sky2_test_intr(int irq, void *dev_id)
4692 {
4693 struct sky2_hw *hw = dev_id;
4694 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
4695
4696 if (status == 0)
4697 return IRQ_NONE;
4698
4699 if (status & Y2_IS_IRQ_SW) {
4700 hw->flags |= SKY2_HW_USE_MSI;
4701 wake_up(&hw->msi_wait);
4702 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4703 }
4704 sky2_write32(hw, B0_Y2_SP_ICR, 2);
4705
4706 return IRQ_HANDLED;
4707 }
4708
4709 /* Test interrupt path by forcing a software IRQ */
sky2_test_msi(struct sky2_hw * hw)4710 static int sky2_test_msi(struct sky2_hw *hw)
4711 {
4712 struct pci_dev *pdev = hw->pdev;
4713 int err;
4714
4715 init_waitqueue_head(&hw->msi_wait);
4716
4717 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
4718 if (err) {
4719 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4720 return err;
4721 }
4722
4723 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
4724
4725 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
4726 sky2_read8(hw, B0_CTST);
4727
4728 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
4729
4730 if (!(hw->flags & SKY2_HW_USE_MSI)) {
4731 /* MSI test failed, go back to INTx mode */
4732 dev_info(&pdev->dev, "No interrupt generated using MSI, "
4733 "switching to INTx mode.\n");
4734
4735 err = -EOPNOTSUPP;
4736 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4737 }
4738
4739 sky2_write32(hw, B0_IMSK, 0);
4740 sky2_read32(hw, B0_IMSK);
4741
4742 free_irq(pdev->irq, hw);
4743
4744 return err;
4745 }
4746
4747 /* This driver supports yukon2 chipset only */
sky2_name(u8 chipid,char * buf,int sz)4748 static const char *sky2_name(u8 chipid, char *buf, int sz)
4749 {
4750 static const char *const name[] = {
4751 "XL", /* 0xb3 */
4752 "EC Ultra", /* 0xb4 */
4753 "Extreme", /* 0xb5 */
4754 "EC", /* 0xb6 */
4755 "FE", /* 0xb7 */
4756 "FE+", /* 0xb8 */
4757 "Supreme", /* 0xb9 */
4758 "UL 2", /* 0xba */
4759 "Unknown", /* 0xbb */
4760 "Optima", /* 0xbc */
4761 "OptimaEEE", /* 0xbd */
4762 "Optima 2", /* 0xbe */
4763 };
4764
4765 if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OP_2)
4766 snprintf(buf, sz, "%s", name[chipid - CHIP_ID_YUKON_XL]);
4767 else
4768 snprintf(buf, sz, "(chip %#x)", chipid);
4769 return buf;
4770 }
4771
4772 static const struct dmi_system_id msi_blacklist[] = {
4773 {
4774 .ident = "Dell Inspiron 1545",
4775 .matches = {
4776 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
4777 DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1545"),
4778 },
4779 },
4780 {
4781 .ident = "Gateway P-79",
4782 .matches = {
4783 DMI_MATCH(DMI_SYS_VENDOR, "Gateway"),
4784 DMI_MATCH(DMI_PRODUCT_NAME, "P-79"),
4785 },
4786 },
4787 {
4788 .ident = "ASUS P5W DH Deluxe",
4789 .matches = {
4790 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTEK COMPUTER INC"),
4791 DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
4792 },
4793 },
4794 {
4795 .ident = "ASUS P6T",
4796 .matches = {
4797 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
4798 DMI_MATCH(DMI_BOARD_NAME, "P6T"),
4799 },
4800 },
4801 {
4802 .ident = "ASUS P6X",
4803 .matches = {
4804 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
4805 DMI_MATCH(DMI_BOARD_NAME, "P6X"),
4806 },
4807 },
4808 {}
4809 };
4810
sky2_probe(struct pci_dev * pdev,const struct pci_device_id * ent)4811 static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
4812 {
4813 struct net_device *dev, *dev1;
4814 struct sky2_hw *hw;
4815 int err, using_dac = 0, wol_default;
4816 u32 reg;
4817 char buf1[16];
4818
4819 err = pci_enable_device(pdev);
4820 if (err) {
4821 dev_err(&pdev->dev, "cannot enable PCI device\n");
4822 goto err_out;
4823 }
4824
4825 /* Get configuration information
4826 * Note: only regular PCI config access once to test for HW issues
4827 * other PCI access through shared memory for speed and to
4828 * avoid MMCONFIG problems.
4829 */
4830 err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®);
4831 if (err) {
4832 dev_err(&pdev->dev, "PCI read config failed\n");
4833 goto err_out_disable;
4834 }
4835
4836 if (~reg == 0) {
4837 dev_err(&pdev->dev, "PCI configuration read error\n");
4838 err = -EIO;
4839 goto err_out_disable;
4840 }
4841
4842 err = pci_request_regions(pdev, DRV_NAME);
4843 if (err) {
4844 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
4845 goto err_out_disable;
4846 }
4847
4848 pci_set_master(pdev);
4849
4850 if (sizeof(dma_addr_t) > sizeof(u32) &&
4851 !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
4852 using_dac = 1;
4853 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
4854 if (err < 0) {
4855 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
4856 "for consistent allocations\n");
4857 goto err_out_free_regions;
4858 }
4859 } else {
4860 err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
4861 if (err) {
4862 dev_err(&pdev->dev, "no usable DMA configuration\n");
4863 goto err_out_free_regions;
4864 }
4865 }
4866
4867
4868 #ifdef __BIG_ENDIAN
4869 /* The sk98lin vendor driver uses hardware byte swapping but
4870 * this driver uses software swapping.
4871 */
4872 reg &= ~PCI_REV_DESC;
4873 err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
4874 if (err) {
4875 dev_err(&pdev->dev, "PCI write config failed\n");
4876 goto err_out_free_regions;
4877 }
4878 #endif
4879
4880 wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
4881
4882 err = -ENOMEM;
4883
4884 hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
4885 + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
4886 if (!hw)
4887 goto err_out_free_regions;
4888
4889 hw->pdev = pdev;
4890 sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
4891
4892 hw->regs = ioremap(pci_resource_start(pdev, 0), 0x4000);
4893 if (!hw->regs) {
4894 dev_err(&pdev->dev, "cannot map device registers\n");
4895 goto err_out_free_hw;
4896 }
4897
4898 err = sky2_init(hw);
4899 if (err)
4900 goto err_out_iounmap;
4901
4902 /* ring for status responses */
4903 hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
4904 hw->st_le = dma_alloc_coherent(&pdev->dev,
4905 hw->st_size * sizeof(struct sky2_status_le),
4906 &hw->st_dma, GFP_KERNEL);
4907 if (!hw->st_le) {
4908 err = -ENOMEM;
4909 goto err_out_reset;
4910 }
4911
4912 dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
4913 sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
4914
4915 sky2_reset(hw);
4916
4917 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
4918 if (!dev) {
4919 err = -ENOMEM;
4920 goto err_out_free_pci;
4921 }
4922
4923 if (disable_msi == -1)
4924 disable_msi = !!dmi_check_system(msi_blacklist);
4925
4926 if (!disable_msi && pci_enable_msi(pdev) == 0) {
4927 err = sky2_test_msi(hw);
4928 if (err) {
4929 pci_disable_msi(pdev);
4930 if (err != -EOPNOTSUPP)
4931 goto err_out_free_netdev;
4932 }
4933 }
4934
4935 netif_napi_add(dev, &hw->napi, sky2_poll);
4936
4937 err = register_netdev(dev);
4938 if (err) {
4939 dev_err(&pdev->dev, "cannot register net device\n");
4940 goto err_out_free_netdev;
4941 }
4942
4943 netif_carrier_off(dev);
4944
4945 sky2_show_addr(dev);
4946
4947 if (hw->ports > 1) {
4948 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
4949 if (!dev1) {
4950 err = -ENOMEM;
4951 goto err_out_unregister;
4952 }
4953
4954 err = register_netdev(dev1);
4955 if (err) {
4956 dev_err(&pdev->dev, "cannot register second net device\n");
4957 goto err_out_free_dev1;
4958 }
4959
4960 err = sky2_setup_irq(hw, hw->irq_name);
4961 if (err)
4962 goto err_out_unregister_dev1;
4963
4964 sky2_show_addr(dev1);
4965 }
4966
4967 timer_setup(&hw->watchdog_timer, sky2_watchdog, 0);
4968 INIT_WORK(&hw->restart_work, sky2_restart);
4969
4970 pci_set_drvdata(pdev, hw);
4971 pdev->d3hot_delay = 300;
4972
4973 return 0;
4974
4975 err_out_unregister_dev1:
4976 unregister_netdev(dev1);
4977 err_out_free_dev1:
4978 free_netdev(dev1);
4979 err_out_unregister:
4980 unregister_netdev(dev);
4981 err_out_free_netdev:
4982 if (hw->flags & SKY2_HW_USE_MSI)
4983 pci_disable_msi(pdev);
4984 free_netdev(dev);
4985 err_out_free_pci:
4986 dma_free_coherent(&pdev->dev,
4987 hw->st_size * sizeof(struct sky2_status_le),
4988 hw->st_le, hw->st_dma);
4989 err_out_reset:
4990 sky2_write8(hw, B0_CTST, CS_RST_SET);
4991 err_out_iounmap:
4992 iounmap(hw->regs);
4993 err_out_free_hw:
4994 kfree(hw);
4995 err_out_free_regions:
4996 pci_release_regions(pdev);
4997 err_out_disable:
4998 pci_disable_device(pdev);
4999 err_out:
5000 return err;
5001 }
5002
sky2_remove(struct pci_dev * pdev)5003 static void sky2_remove(struct pci_dev *pdev)
5004 {
5005 struct sky2_hw *hw = pci_get_drvdata(pdev);
5006 int i;
5007
5008 if (!hw)
5009 return;
5010
5011 timer_shutdown_sync(&hw->watchdog_timer);
5012 cancel_work_sync(&hw->restart_work);
5013
5014 for (i = hw->ports-1; i >= 0; --i)
5015 unregister_netdev(hw->dev[i]);
5016
5017 sky2_write32(hw, B0_IMSK, 0);
5018 sky2_read32(hw, B0_IMSK);
5019
5020 sky2_power_aux(hw);
5021
5022 sky2_write8(hw, B0_CTST, CS_RST_SET);
5023 sky2_read8(hw, B0_CTST);
5024
5025 if (hw->ports > 1) {
5026 napi_disable(&hw->napi);
5027 free_irq(pdev->irq, hw);
5028 }
5029
5030 if (hw->flags & SKY2_HW_USE_MSI)
5031 pci_disable_msi(pdev);
5032 dma_free_coherent(&pdev->dev,
5033 hw->st_size * sizeof(struct sky2_status_le),
5034 hw->st_le, hw->st_dma);
5035 pci_release_regions(pdev);
5036 pci_disable_device(pdev);
5037
5038 for (i = hw->ports-1; i >= 0; --i)
5039 free_netdev(hw->dev[i]);
5040
5041 iounmap(hw->regs);
5042 kfree(hw);
5043 }
5044
sky2_suspend(struct device * dev)5045 static int sky2_suspend(struct device *dev)
5046 {
5047 struct sky2_hw *hw = dev_get_drvdata(dev);
5048 int i;
5049
5050 if (!hw)
5051 return 0;
5052
5053 timer_delete_sync(&hw->watchdog_timer);
5054 cancel_work_sync(&hw->restart_work);
5055
5056 rtnl_lock();
5057
5058 sky2_all_down(hw);
5059 for (i = 0; i < hw->ports; i++) {
5060 struct net_device *dev = hw->dev[i];
5061 struct sky2_port *sky2 = netdev_priv(dev);
5062
5063 if (sky2->wol)
5064 sky2_wol_init(sky2);
5065 }
5066
5067 sky2_power_aux(hw);
5068 rtnl_unlock();
5069
5070 return 0;
5071 }
5072
5073 #ifdef CONFIG_PM_SLEEP
sky2_resume(struct device * dev)5074 static int sky2_resume(struct device *dev)
5075 {
5076 struct pci_dev *pdev = to_pci_dev(dev);
5077 struct sky2_hw *hw = pci_get_drvdata(pdev);
5078 int err;
5079
5080 if (!hw)
5081 return 0;
5082
5083 /* Re-enable all clocks */
5084 err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
5085 if (err) {
5086 dev_err(&pdev->dev, "PCI write config failed\n");
5087 goto out;
5088 }
5089
5090 rtnl_lock();
5091 sky2_reset(hw);
5092 sky2_all_up(hw);
5093 rtnl_unlock();
5094
5095 return 0;
5096 out:
5097
5098 dev_err(&pdev->dev, "resume failed (%d)\n", err);
5099 pci_disable_device(pdev);
5100 return err;
5101 }
5102
5103 static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume);
5104 #define SKY2_PM_OPS (&sky2_pm_ops)
5105
5106 #else
5107
5108 #define SKY2_PM_OPS NULL
5109 #endif
5110
sky2_shutdown(struct pci_dev * pdev)5111 static void sky2_shutdown(struct pci_dev *pdev)
5112 {
5113 struct sky2_hw *hw = pci_get_drvdata(pdev);
5114 int port;
5115
5116 for (port = 0; port < hw->ports; port++) {
5117 struct net_device *ndev = hw->dev[port];
5118
5119 rtnl_lock();
5120 if (netif_running(ndev)) {
5121 dev_close(ndev);
5122 netif_device_detach(ndev);
5123 }
5124 rtnl_unlock();
5125 }
5126 sky2_suspend(&pdev->dev);
5127 pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
5128 pci_set_power_state(pdev, PCI_D3hot);
5129 }
5130
5131 static struct pci_driver sky2_driver = {
5132 .name = DRV_NAME,
5133 .id_table = sky2_id_table,
5134 .probe = sky2_probe,
5135 .remove = sky2_remove,
5136 .shutdown = sky2_shutdown,
5137 .driver.pm = SKY2_PM_OPS,
5138 };
5139
sky2_init_module(void)5140 static int __init sky2_init_module(void)
5141 {
5142 pr_info("driver version " DRV_VERSION "\n");
5143
5144 sky2_debug_init();
5145 return pci_register_driver(&sky2_driver);
5146 }
5147
sky2_cleanup_module(void)5148 static void __exit sky2_cleanup_module(void)
5149 {
5150 pci_unregister_driver(&sky2_driver);
5151 sky2_debug_cleanup();
5152 }
5153
5154 module_init(sky2_init_module);
5155 module_exit(sky2_cleanup_module);
5156
5157 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
5158 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
5159 MODULE_LICENSE("GPL");
5160 MODULE_VERSION(DRV_VERSION);
5161