xref: /linux/drivers/net/wireless/ath/ath6kl/hif.h (revision 4f2c0a4acffbec01079c28f839422e64ddeff004)
1 /*
2  * Copyright (c) 2004-2011 Atheros Communications Inc.
3  * Copyright (c) 2011 Qualcomm Atheros, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #ifndef HIF_H
19 #define HIF_H
20 
21 #include "common.h"
22 #include "core.h"
23 
24 #include <linux/scatterlist.h>
25 
26 #define BUS_REQUEST_MAX_NUM                64
27 #define HIF_MBOX_BLOCK_SIZE                128
28 #define HIF_MBOX0_BLOCK_SIZE               1
29 
30 #define HIF_DMA_BUFFER_SIZE (32 * 1024)
31 #define CMD53_FIXED_ADDRESS 1
32 #define CMD53_INCR_ADDRESS  2
33 
34 #define MAX_SCATTER_REQUESTS             4
35 #define MAX_SCATTER_ENTRIES_PER_REQ      16
36 #define MAX_SCATTER_REQ_TRANSFER_SIZE    (32 * 1024)
37 
38 /* Mailbox address in SDIO address space */
39 #define HIF_MBOX_BASE_ADDR                 0x800
40 #define HIF_MBOX_WIDTH                     0x800
41 
42 #define HIF_MBOX_END_ADDR  (HTC_MAILBOX_NUM_MAX * HIF_MBOX_WIDTH - 1)
43 
44 /* version 1 of the chip has only a 12K extended mbox range */
45 #define HIF_MBOX0_EXT_BASE_ADDR  0x4000
46 #define HIF_MBOX0_EXT_WIDTH      (12*1024)
47 
48 /* GMBOX addresses */
49 #define HIF_GMBOX_BASE_ADDR                0x7000
50 #define HIF_GMBOX_WIDTH                    0x4000
51 
52 /* interrupt mode register */
53 #define CCCR_SDIO_IRQ_MODE_REG         0xF0
54 
55 /* mode to enable special 4-bit interrupt assertion without clock */
56 #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ   (1 << 0)
57 
58 /* HTC runs over mailbox 0 */
59 #define HTC_MAILBOX	0
60 
61 #define ATH6KL_TARGET_DEBUG_INTR_MASK     0x01
62 
63 /* FIXME: are these duplicates with MAX_SCATTER_ values in hif.h? */
64 #define ATH6KL_SCATTER_ENTRIES_PER_REQ            16
65 #define ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER      (16 * 1024)
66 #define ATH6KL_SCATTER_REQS                       4
67 
68 #define ATH6KL_HIF_COMMUNICATION_TIMEOUT	1000
69 
70 struct bus_request {
71 	struct list_head list;
72 
73 	/* request data */
74 	u32 address;
75 
76 	u8 *buffer;
77 	u32 length;
78 	u32 request;
79 	struct htc_packet *packet;
80 	int status;
81 
82 	/* this is a scatter request */
83 	struct hif_scatter_req *scat_req;
84 };
85 
86 /* direction of transfer (read/write) */
87 #define HIF_READ                    0x00000001
88 #define HIF_WRITE                   0x00000002
89 #define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)
90 
91 /*
92  *     emode - This indicates the whether the command is to be executed in a
93  *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
94  *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
95  *             implemented using the asynchronous mode allowing the bus
96  *             driver to indicate the completion of operation through the
97  *             registered callback routine. The requirement primarily comes
98  *             from the contexts these operations get called from (a driver's
99  *             transmit context or the ISR context in case of receive).
100  *             Support for both of these modes is essential.
101  */
102 #define HIF_SYNCHRONOUS             0x00000010
103 #define HIF_ASYNCHRONOUS            0x00000020
104 #define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
105 
106 /*
107  *     dmode - An interface may support different kinds of commands based on
108  *             the tradeoff between the amount of data it can carry and the
109  *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
110  *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
111  *             to the nearest block size by padding. The size of the block is
112  *             configurable at compile time using the HIF_BLOCK_SIZE and is
113  *             negotiated with the target during initialization after the
114  *             ATH6KL interrupts are enabled.
115  */
116 #define HIF_BYTE_BASIS              0x00000040
117 #define HIF_BLOCK_BASIS             0x00000080
118 #define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
119 
120 /*
121  *     amode - This indicates if the address has to be incremented on ATH6KL
122  *             after every read/write operation (HIF?FIXED_ADDRESS/
123  *             HIF_INCREMENTAL_ADDRESS).
124  */
125 #define HIF_FIXED_ADDRESS           0x00000100
126 #define HIF_INCREMENTAL_ADDRESS     0x00000200
127 #define HIF_AMODE_MASK		  (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
128 
129 #define HIF_WR_ASYNC_BYTE_INC					\
130 	(HIF_WRITE | HIF_ASYNCHRONOUS |				\
131 	 HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
132 
133 #define HIF_WR_ASYNC_BLOCK_INC					\
134 	(HIF_WRITE | HIF_ASYNCHRONOUS |				\
135 	 HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
136 
137 #define HIF_WR_SYNC_BYTE_FIX					\
138 	(HIF_WRITE | HIF_SYNCHRONOUS |				\
139 	 HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
140 
141 #define HIF_WR_SYNC_BYTE_INC					\
142 	(HIF_WRITE | HIF_SYNCHRONOUS |				\
143 	 HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
144 
145 #define HIF_WR_SYNC_BLOCK_INC					\
146 	(HIF_WRITE | HIF_SYNCHRONOUS |				\
147 	 HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
148 
149 #define HIF_RD_SYNC_BYTE_INC						\
150 	(HIF_READ | HIF_SYNCHRONOUS |					\
151 	 HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
152 
153 #define HIF_RD_SYNC_BYTE_FIX						\
154 	(HIF_READ | HIF_SYNCHRONOUS |					\
155 	 HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
156 
157 #define HIF_RD_ASYNC_BLOCK_FIX						\
158 	(HIF_READ | HIF_ASYNCHRONOUS |					\
159 	 HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
160 
161 #define HIF_RD_SYNC_BLOCK_FIX						\
162 	(HIF_READ | HIF_SYNCHRONOUS |					\
163 	 HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
164 
165 struct hif_scatter_item {
166 	u8 *buf;
167 	int len;
168 	struct htc_packet *packet;
169 };
170 
171 struct hif_scatter_req {
172 	struct list_head list;
173 	/* address for the read/write operation */
174 	u32 addr;
175 
176 	/* request flags */
177 	u32 req;
178 
179 	/* total length of entire transfer */
180 	u32 len;
181 
182 	bool virt_scat;
183 
184 	void (*complete) (struct htc_target *, struct hif_scatter_req *);
185 	int status;
186 	int scat_entries;
187 
188 	struct bus_request *busrequest;
189 	struct scatterlist *sgentries;
190 
191 	/* bounce buffer for upper layers to copy to/from */
192 	u8 *virt_dma_buf;
193 
194 	u32 scat_q_depth;
195 
196 	struct hif_scatter_item scat_list[];
197 };
198 
199 struct ath6kl_irq_proc_registers {
200 	u8 host_int_status;
201 	u8 cpu_int_status;
202 	u8 error_int_status;
203 	u8 counter_int_status;
204 	u8 mbox_frame;
205 	u8 rx_lkahd_valid;
206 	u8 host_int_status2;
207 	u8 gmbox_rx_avail;
208 	__le32 rx_lkahd[2];
209 	__le32 rx_gmbox_lkahd_alias[2];
210 } __packed;
211 
212 struct ath6kl_irq_enable_reg {
213 	u8 int_status_en;
214 	u8 cpu_int_status_en;
215 	u8 err_int_status_en;
216 	u8 cntr_int_status_en;
217 } __packed;
218 
219 struct ath6kl_device {
220 	/* protects irq_proc_reg and irq_en_reg below */
221 	spinlock_t lock;
222 	struct ath6kl_irq_proc_registers irq_proc_reg;
223 	struct ath6kl_irq_enable_reg irq_en_reg;
224 	struct htc_target *htc_cnxt;
225 	struct ath6kl *ar;
226 };
227 
228 struct ath6kl_hif_ops {
229 	int (*read_write_sync)(struct ath6kl *ar, u32 addr, u8 *buf,
230 			       u32 len, u32 request);
231 	int (*write_async)(struct ath6kl *ar, u32 address, u8 *buffer,
232 			   u32 length, u32 request, struct htc_packet *packet);
233 
234 	void (*irq_enable)(struct ath6kl *ar);
235 	void (*irq_disable)(struct ath6kl *ar);
236 
237 	struct hif_scatter_req *(*scatter_req_get)(struct ath6kl *ar);
238 	void (*scatter_req_add)(struct ath6kl *ar,
239 				struct hif_scatter_req *s_req);
240 	int (*enable_scatter)(struct ath6kl *ar);
241 	int (*scat_req_rw) (struct ath6kl *ar,
242 			    struct hif_scatter_req *scat_req);
243 	void (*cleanup_scatter)(struct ath6kl *ar);
244 	int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow);
245 	int (*resume)(struct ath6kl *ar);
246 	int (*diag_read32)(struct ath6kl *ar, u32 address, u32 *value);
247 	int (*diag_write32)(struct ath6kl *ar, u32 address, __le32 value);
248 	int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len);
249 	int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len);
250 	int (*power_on)(struct ath6kl *ar);
251 	int (*power_off)(struct ath6kl *ar);
252 	void (*stop)(struct ath6kl *ar);
253 	int (*pipe_send)(struct ath6kl *ar, u8 pipe, struct sk_buff *hdr_buf,
254 			 struct sk_buff *buf);
255 	void (*pipe_get_default)(struct ath6kl *ar, u8 *pipe_ul, u8 *pipe_dl);
256 	int (*pipe_map_service)(struct ath6kl *ar, u16 service_id, u8 *pipe_ul,
257 				u8 *pipe_dl);
258 	u16 (*pipe_get_free_queue_number)(struct ath6kl *ar, u8 pipe);
259 };
260 
261 int ath6kl_hif_setup(struct ath6kl_device *dev);
262 int ath6kl_hif_unmask_intrs(struct ath6kl_device *dev);
263 int ath6kl_hif_mask_intrs(struct ath6kl_device *dev);
264 int ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device *dev,
265 			       u32 *lk_ahd, int timeout);
266 int ath6kl_hif_rx_control(struct ath6kl_device *dev, bool enable_rx);
267 int ath6kl_hif_disable_intrs(struct ath6kl_device *dev);
268 
269 int ath6kl_hif_rw_comp_handler(void *context, int status);
270 int ath6kl_hif_intr_bh_handler(struct ath6kl *ar);
271 
272 /* Scatter Function and Definitions */
273 int ath6kl_hif_submit_scat_req(struct ath6kl_device *dev,
274 			       struct hif_scatter_req *scat_req, bool read);
275 
276 #endif
277