1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Renesas RZ/G2L MTU3a PWM Timer driver
4 *
5 * Copyright (C) 2023 Renesas Electronics Corporation
6 *
7 * Hardware manual for this IP can be found here
8 * https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en
9 *
10 * Limitations:
11 * - When PWM is disabled, the output is driven to Hi-Z.
12 * - While the hardware supports both polarities, the driver (for now)
13 * only handles normal polarity.
14 * - HW uses one counter and two match components to configure duty_cycle
15 * and period.
16 * - Multi-Function Timer Pulse Unit (a.k.a MTU) has 7 HW channels for PWM
17 * operations. (The channels are MTU{0..4, 6, 7}.)
18 * - MTU{1, 2} channels have a single IO, whereas all other HW channels have
19 * 2 IOs.
20 * - Each IO is modelled as an independent PWM channel.
21 * - rz_mtu3_channel_io_map table is used to map the PWM channel to the
22 * corresponding HW channel as there are difference in number of IOs
23 * between HW channels.
24 */
25
26 #include <linux/bitfield.h>
27 #include <linux/clk.h>
28 #include <linux/limits.h>
29 #include <linux/mfd/rz-mtu3.h>
30 #include <linux/module.h>
31 #include <linux/platform_device.h>
32 #include <linux/pm_runtime.h>
33 #include <linux/pwm.h>
34 #include <linux/time.h>
35
36 #define RZ_MTU3_MAX_PWM_CHANNELS 12
37 #define RZ_MTU3_MAX_HW_CHANNELS 7
38
39 /**
40 * struct rz_mtu3_channel_io_map - MTU3 pwm channel map
41 *
42 * @base_pwm_number: First PWM of a channel
43 * @num_channel_ios: number of IOs on the HW channel.
44 */
45 struct rz_mtu3_channel_io_map {
46 u8 base_pwm_number;
47 u8 num_channel_ios;
48 };
49
50 /**
51 * struct rz_mtu3_pwm_channel - MTU3 pwm channel data
52 *
53 * @mtu: MTU3 channel data
54 * @map: MTU3 pwm channel map
55 */
56 struct rz_mtu3_pwm_channel {
57 struct rz_mtu3_channel *mtu;
58 const struct rz_mtu3_channel_io_map *map;
59 };
60
61 /**
62 * struct rz_mtu3_pwm_chip - MTU3 pwm private data
63 *
64 * @clk: MTU3 module clock
65 * @lock: Lock to prevent concurrent access for usage count
66 * @rate: MTU3 clock rate
67 * @user_count: MTU3 usage count
68 * @enable_count: MTU3 enable count
69 * @prescale: MTU3 prescale
70 * @channel_data: MTU3 pwm channel data
71 */
72
73 struct rz_mtu3_pwm_chip {
74 struct clk *clk;
75 struct mutex lock;
76 unsigned long rate;
77 u32 user_count[RZ_MTU3_MAX_HW_CHANNELS];
78 u32 enable_count[RZ_MTU3_MAX_HW_CHANNELS];
79 u8 prescale[RZ_MTU3_MAX_HW_CHANNELS];
80 struct rz_mtu3_pwm_channel channel_data[RZ_MTU3_MAX_HW_CHANNELS];
81 };
82
83 /*
84 * The MTU channels are {0..4, 6, 7} and the number of IO on MTU1
85 * and MTU2 channel is 1 compared to 2 on others.
86 */
87 static const struct rz_mtu3_channel_io_map channel_map[] = {
88 { 0, 2 }, { 2, 1 }, { 3, 1 }, { 4, 2 }, { 6, 2 }, { 8, 2 }, { 10, 2 }
89 };
90
to_rz_mtu3_pwm_chip(struct pwm_chip * chip)91 static inline struct rz_mtu3_pwm_chip *to_rz_mtu3_pwm_chip(struct pwm_chip *chip)
92 {
93 return pwmchip_get_drvdata(chip);
94 }
95
rz_mtu3_pwm_read_tgr_registers(struct rz_mtu3_pwm_channel * priv,u16 reg_pv_offset,u16 * pv_val,u16 reg_dc_offset,u16 * dc_val)96 static void rz_mtu3_pwm_read_tgr_registers(struct rz_mtu3_pwm_channel *priv,
97 u16 reg_pv_offset, u16 *pv_val,
98 u16 reg_dc_offset, u16 *dc_val)
99 {
100 *pv_val = rz_mtu3_16bit_ch_read(priv->mtu, reg_pv_offset);
101 *dc_val = rz_mtu3_16bit_ch_read(priv->mtu, reg_dc_offset);
102 }
103
rz_mtu3_pwm_write_tgr_registers(struct rz_mtu3_pwm_channel * priv,u16 reg_pv_offset,u16 pv_val,u16 reg_dc_offset,u16 dc_val)104 static void rz_mtu3_pwm_write_tgr_registers(struct rz_mtu3_pwm_channel *priv,
105 u16 reg_pv_offset, u16 pv_val,
106 u16 reg_dc_offset, u16 dc_val)
107 {
108 rz_mtu3_16bit_ch_write(priv->mtu, reg_pv_offset, pv_val);
109 rz_mtu3_16bit_ch_write(priv->mtu, reg_dc_offset, dc_val);
110 }
111
rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip * rz_mtu3,u64 period_cycles)112 static u8 rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip *rz_mtu3,
113 u64 period_cycles)
114 {
115 u32 prescaled_period_cycles;
116 u8 prescale;
117
118 /*
119 * Supported prescale values are 1, 4, 16 and 64.
120 * TODO: Support prescale values 2, 8, 32, 256 and 1024.
121 */
122 prescaled_period_cycles = period_cycles >> 16;
123 if (prescaled_period_cycles >= 16)
124 prescale = 3;
125 else
126 prescale = (fls(prescaled_period_cycles) + 1) / 2;
127
128 return prescale;
129 }
130
131 static struct rz_mtu3_pwm_channel *
rz_mtu3_get_channel(struct rz_mtu3_pwm_chip * rz_mtu3_pwm,u32 hwpwm)132 rz_mtu3_get_channel(struct rz_mtu3_pwm_chip *rz_mtu3_pwm, u32 hwpwm)
133 {
134 struct rz_mtu3_pwm_channel *priv = rz_mtu3_pwm->channel_data;
135 unsigned int ch;
136
137 for (ch = 0; ch < RZ_MTU3_MAX_HW_CHANNELS; ch++, priv++) {
138 if (priv->map->base_pwm_number + priv->map->num_channel_ios > hwpwm)
139 break;
140 }
141
142 return priv;
143 }
144
rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip * rz_mtu3_pwm,u32 hwpwm)145 static bool rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
146 u32 hwpwm)
147 {
148 struct rz_mtu3_pwm_channel *priv;
149 bool is_channel_en;
150 u8 val;
151
152 priv = rz_mtu3_get_channel(rz_mtu3_pwm, hwpwm);
153 is_channel_en = rz_mtu3_is_enabled(priv->mtu);
154 if (!is_channel_en)
155 return false;
156
157 if (priv->map->base_pwm_number == hwpwm)
158 val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TIORH);
159 else
160 val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TIORL);
161
162 return val & RZ_MTU3_TIOR_IOA;
163 }
164
rz_mtu3_pwm_request(struct pwm_chip * chip,struct pwm_device * pwm)165 static int rz_mtu3_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
166 {
167 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
168 struct rz_mtu3_pwm_channel *priv;
169 bool is_mtu3_channel_available;
170 u32 ch;
171
172 priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
173 ch = priv - rz_mtu3_pwm->channel_data;
174
175 mutex_lock(&rz_mtu3_pwm->lock);
176 /*
177 * Each channel must be requested only once, so if the channel
178 * serves two PWMs and the other is already requested, skip over
179 * rz_mtu3_request_channel()
180 */
181 if (!rz_mtu3_pwm->user_count[ch]) {
182 is_mtu3_channel_available = rz_mtu3_request_channel(priv->mtu);
183 if (!is_mtu3_channel_available) {
184 mutex_unlock(&rz_mtu3_pwm->lock);
185 return -EBUSY;
186 }
187 }
188
189 rz_mtu3_pwm->user_count[ch]++;
190 mutex_unlock(&rz_mtu3_pwm->lock);
191
192 return 0;
193 }
194
rz_mtu3_pwm_free(struct pwm_chip * chip,struct pwm_device * pwm)195 static void rz_mtu3_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
196 {
197 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
198 struct rz_mtu3_pwm_channel *priv;
199 u32 ch;
200
201 priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
202 ch = priv - rz_mtu3_pwm->channel_data;
203
204 mutex_lock(&rz_mtu3_pwm->lock);
205 rz_mtu3_pwm->user_count[ch]--;
206 if (!rz_mtu3_pwm->user_count[ch])
207 rz_mtu3_release_channel(priv->mtu);
208
209 mutex_unlock(&rz_mtu3_pwm->lock);
210 }
211
rz_mtu3_pwm_enable(struct pwm_chip * chip,struct pwm_device * pwm)212 static int rz_mtu3_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
213 {
214 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
215 struct rz_mtu3_pwm_channel *priv;
216 u32 ch;
217 u8 val;
218 int rc;
219
220 rc = pm_runtime_resume_and_get(pwmchip_parent(chip));
221 if (rc)
222 return rc;
223
224 priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
225 ch = priv - rz_mtu3_pwm->channel_data;
226 val = RZ_MTU3_TIOR_OC_IOB_TOGGLE | RZ_MTU3_TIOR_OC_IOA_H_COMP_MATCH;
227
228 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_PWMMODE1);
229 if (priv->map->base_pwm_number == pwm->hwpwm)
230 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORH, val);
231 else
232 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORL, val);
233
234 mutex_lock(&rz_mtu3_pwm->lock);
235 if (!rz_mtu3_pwm->enable_count[ch])
236 rz_mtu3_enable(priv->mtu);
237
238 rz_mtu3_pwm->enable_count[ch]++;
239 mutex_unlock(&rz_mtu3_pwm->lock);
240
241 return 0;
242 }
243
rz_mtu3_pwm_disable(struct pwm_chip * chip,struct pwm_device * pwm)244 static void rz_mtu3_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
245 {
246 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
247 struct rz_mtu3_pwm_channel *priv;
248 u32 ch;
249
250 priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
251 ch = priv - rz_mtu3_pwm->channel_data;
252
253 /* Disable output pins of MTU3 channel */
254 if (priv->map->base_pwm_number == pwm->hwpwm)
255 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORH, RZ_MTU3_TIOR_OC_RETAIN);
256 else
257 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORL, RZ_MTU3_TIOR_OC_RETAIN);
258
259 mutex_lock(&rz_mtu3_pwm->lock);
260 rz_mtu3_pwm->enable_count[ch]--;
261 if (!rz_mtu3_pwm->enable_count[ch])
262 rz_mtu3_disable(priv->mtu);
263
264 mutex_unlock(&rz_mtu3_pwm->lock);
265
266 pm_runtime_put_sync(pwmchip_parent(chip));
267 }
268
rz_mtu3_pwm_get_state(struct pwm_chip * chip,struct pwm_device * pwm,struct pwm_state * state)269 static int rz_mtu3_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
270 struct pwm_state *state)
271 {
272 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
273 int rc;
274
275 rc = pm_runtime_resume_and_get(pwmchip_parent(chip));
276 if (rc)
277 return rc;
278
279 state->enabled = rz_mtu3_pwm_is_ch_enabled(rz_mtu3_pwm, pwm->hwpwm);
280 if (state->enabled) {
281 struct rz_mtu3_pwm_channel *priv;
282 u8 prescale, val;
283 u16 dc, pv;
284 u64 tmp;
285
286 priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
287 if (priv->map->base_pwm_number == pwm->hwpwm)
288 rz_mtu3_pwm_read_tgr_registers(priv, RZ_MTU3_TGRA, &pv,
289 RZ_MTU3_TGRB, &dc);
290 else
291 rz_mtu3_pwm_read_tgr_registers(priv, RZ_MTU3_TGRC, &pv,
292 RZ_MTU3_TGRD, &dc);
293
294 val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TCR);
295 prescale = FIELD_GET(RZ_MTU3_TCR_TPCS, val);
296
297 /* With prescale <= 7 and pv <= 0xffff this doesn't overflow. */
298 tmp = NSEC_PER_SEC * (u64)pv << (2 * prescale);
299 state->period = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
300 tmp = NSEC_PER_SEC * (u64)dc << (2 * prescale);
301 state->duty_cycle = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
302
303 if (state->duty_cycle > state->period)
304 state->duty_cycle = state->period;
305 }
306
307 state->polarity = PWM_POLARITY_NORMAL;
308 pm_runtime_put(pwmchip_parent(chip));
309
310 return 0;
311 }
312
rz_mtu3_pwm_calculate_pv_or_dc(u64 period_or_duty_cycle,u8 prescale)313 static u16 rz_mtu3_pwm_calculate_pv_or_dc(u64 period_or_duty_cycle, u8 prescale)
314 {
315 return min(period_or_duty_cycle >> (2 * prescale), (u64)U16_MAX);
316 }
317
rz_mtu3_pwm_config(struct pwm_chip * chip,struct pwm_device * pwm,const struct pwm_state * state)318 static int rz_mtu3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
319 const struct pwm_state *state)
320 {
321 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
322 struct rz_mtu3_pwm_channel *priv;
323 u64 period_cycles;
324 u64 duty_cycles;
325 u8 prescale;
326 u16 pv, dc;
327 u8 val;
328 u32 ch;
329
330 priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
331 ch = priv - rz_mtu3_pwm->channel_data;
332
333 period_cycles = mul_u64_u32_div(state->period, rz_mtu3_pwm->rate,
334 NSEC_PER_SEC);
335 prescale = rz_mtu3_pwm_calculate_prescale(rz_mtu3_pwm, period_cycles);
336
337 /*
338 * Prescalar is shared by multiple channels, so prescale can
339 * NOT be modified when there are multiple channels in use with
340 * different settings. Modify prescalar if other PWM is off or handle
341 * it, if current prescale value is less than the one we want to set.
342 */
343 if (rz_mtu3_pwm->enable_count[ch] > 1) {
344 if (rz_mtu3_pwm->prescale[ch] > prescale)
345 return -EBUSY;
346
347 prescale = rz_mtu3_pwm->prescale[ch];
348 }
349
350 pv = rz_mtu3_pwm_calculate_pv_or_dc(period_cycles, prescale);
351
352 duty_cycles = mul_u64_u32_div(state->duty_cycle, rz_mtu3_pwm->rate,
353 NSEC_PER_SEC);
354 dc = rz_mtu3_pwm_calculate_pv_or_dc(duty_cycles, prescale);
355
356 /*
357 * If the PWM channel is disabled, make sure to turn on the clock
358 * before writing the register.
359 */
360 if (!pwm->state.enabled) {
361 int rc;
362
363 rc = pm_runtime_resume_and_get(pwmchip_parent(chip));
364 if (rc)
365 return rc;
366 }
367
368 val = RZ_MTU3_TCR_CKEG_RISING | prescale;
369
370 /* Counter must be stopped while updating TCR register */
371 if (rz_mtu3_pwm->prescale[ch] != prescale && rz_mtu3_pwm->enable_count[ch])
372 rz_mtu3_disable(priv->mtu);
373
374 if (priv->map->base_pwm_number == pwm->hwpwm) {
375 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TCR,
376 RZ_MTU3_TCR_CCLR_TGRA | val);
377 rz_mtu3_pwm_write_tgr_registers(priv, RZ_MTU3_TGRA, pv,
378 RZ_MTU3_TGRB, dc);
379 } else {
380 rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TCR,
381 RZ_MTU3_TCR_CCLR_TGRC | val);
382 rz_mtu3_pwm_write_tgr_registers(priv, RZ_MTU3_TGRC, pv,
383 RZ_MTU3_TGRD, dc);
384 }
385
386 if (rz_mtu3_pwm->prescale[ch] != prescale) {
387 /*
388 * Prescalar is shared by multiple channels, we cache the
389 * prescalar value from first enabled channel and use the same
390 * value for both channels.
391 */
392 rz_mtu3_pwm->prescale[ch] = prescale;
393
394 if (rz_mtu3_pwm->enable_count[ch])
395 rz_mtu3_enable(priv->mtu);
396 }
397
398 /* If the PWM is not enabled, turn the clock off again to save power. */
399 if (!pwm->state.enabled)
400 pm_runtime_put(pwmchip_parent(chip));
401
402 return 0;
403 }
404
rz_mtu3_pwm_apply(struct pwm_chip * chip,struct pwm_device * pwm,const struct pwm_state * state)405 static int rz_mtu3_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
406 const struct pwm_state *state)
407 {
408 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
409 bool enabled = pwm->state.enabled;
410 int ret;
411
412 if (state->polarity != PWM_POLARITY_NORMAL)
413 return -EINVAL;
414
415 if (!state->enabled) {
416 if (enabled)
417 rz_mtu3_pwm_disable(chip, pwm);
418
419 return 0;
420 }
421
422 mutex_lock(&rz_mtu3_pwm->lock);
423 ret = rz_mtu3_pwm_config(chip, pwm, state);
424 mutex_unlock(&rz_mtu3_pwm->lock);
425 if (ret)
426 return ret;
427
428 if (!enabled)
429 ret = rz_mtu3_pwm_enable(chip, pwm);
430
431 return ret;
432 }
433
434 static const struct pwm_ops rz_mtu3_pwm_ops = {
435 .request = rz_mtu3_pwm_request,
436 .free = rz_mtu3_pwm_free,
437 .get_state = rz_mtu3_pwm_get_state,
438 .apply = rz_mtu3_pwm_apply,
439 };
440
rz_mtu3_pwm_pm_runtime_suspend(struct device * dev)441 static int rz_mtu3_pwm_pm_runtime_suspend(struct device *dev)
442 {
443 struct pwm_chip *chip = dev_get_drvdata(dev);
444 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
445
446 clk_disable_unprepare(rz_mtu3_pwm->clk);
447
448 return 0;
449 }
450
rz_mtu3_pwm_pm_runtime_resume(struct device * dev)451 static int rz_mtu3_pwm_pm_runtime_resume(struct device *dev)
452 {
453 struct pwm_chip *chip = dev_get_drvdata(dev);
454 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
455
456 return clk_prepare_enable(rz_mtu3_pwm->clk);
457 }
458
459 static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_pwm_pm_ops,
460 rz_mtu3_pwm_pm_runtime_suspend,
461 rz_mtu3_pwm_pm_runtime_resume, NULL);
462
rz_mtu3_pwm_pm_disable(void * data)463 static void rz_mtu3_pwm_pm_disable(void *data)
464 {
465 struct pwm_chip *chip = data;
466 struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
467
468 clk_rate_exclusive_put(rz_mtu3_pwm->clk);
469 pm_runtime_disable(pwmchip_parent(chip));
470 pm_runtime_set_suspended(pwmchip_parent(chip));
471 }
472
rz_mtu3_pwm_probe(struct platform_device * pdev)473 static int rz_mtu3_pwm_probe(struct platform_device *pdev)
474 {
475 struct rz_mtu3 *parent_ddata = dev_get_drvdata(pdev->dev.parent);
476 struct rz_mtu3_pwm_chip *rz_mtu3_pwm;
477 struct pwm_chip *chip;
478 struct device *dev = &pdev->dev;
479 unsigned int i, j = 0;
480 int ret;
481
482 chip = devm_pwmchip_alloc(&pdev->dev, RZ_MTU3_MAX_PWM_CHANNELS,
483 sizeof(*rz_mtu3_pwm));
484 if (IS_ERR(chip))
485 return PTR_ERR(chip);
486 rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
487
488 rz_mtu3_pwm->clk = parent_ddata->clk;
489
490 for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
491 if (i == RZ_MTU3_CHAN_5 || i == RZ_MTU3_CHAN_8)
492 continue;
493
494 rz_mtu3_pwm->channel_data[j].mtu = &parent_ddata->channels[i];
495 rz_mtu3_pwm->channel_data[j].mtu->dev = dev;
496 rz_mtu3_pwm->channel_data[j].map = &channel_map[j];
497 j++;
498 }
499
500 mutex_init(&rz_mtu3_pwm->lock);
501 platform_set_drvdata(pdev, chip);
502 ret = clk_prepare_enable(rz_mtu3_pwm->clk);
503 if (ret)
504 return dev_err_probe(dev, ret, "Clock enable failed\n");
505
506 clk_rate_exclusive_get(rz_mtu3_pwm->clk);
507
508 rz_mtu3_pwm->rate = clk_get_rate(rz_mtu3_pwm->clk);
509 /*
510 * Refuse clk rates > 1 GHz to prevent overflow later for computing
511 * period and duty cycle.
512 */
513 if (rz_mtu3_pwm->rate > NSEC_PER_SEC) {
514 ret = -EINVAL;
515 clk_rate_exclusive_put(rz_mtu3_pwm->clk);
516 goto disable_clock;
517 }
518
519 pm_runtime_set_active(&pdev->dev);
520 pm_runtime_enable(&pdev->dev);
521 ret = devm_add_action_or_reset(&pdev->dev, rz_mtu3_pwm_pm_disable,
522 chip);
523 if (ret < 0)
524 return ret;
525
526 chip->ops = &rz_mtu3_pwm_ops;
527 ret = devm_pwmchip_add(&pdev->dev, chip);
528 if (ret)
529 return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
530
531 pm_runtime_idle(&pdev->dev);
532
533 return 0;
534
535 disable_clock:
536 clk_disable_unprepare(rz_mtu3_pwm->clk);
537 return ret;
538 }
539
540 static struct platform_driver rz_mtu3_pwm_driver = {
541 .driver = {
542 .name = "pwm-rz-mtu3",
543 .pm = pm_ptr(&rz_mtu3_pwm_pm_ops),
544 },
545 .probe = rz_mtu3_pwm_probe,
546 };
547 module_platform_driver(rz_mtu3_pwm_driver);
548
549 MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
550 MODULE_ALIAS("platform:pwm-rz-mtu3");
551 MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a PWM Timer Driver");
552 MODULE_LICENSE("GPL");
553