xref: /linux/tools/testing/selftests/net/unicast_extensions.sh (revision 9410645520e9b820069761f3450ef6661418e279)
1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# By Seth Schoen (c) 2021, for the IPv4 Unicast Extensions Project
5# Thanks to David Ahern for help and advice on nettest modifications.
6#
7# Self-tests for IPv4 address extensions: the kernel's ability to accept
8# certain traditionally unused or unallocated IPv4 addresses. For each kind
9# of address, we test for interface assignment, ping, TCP, and forwarding.
10# Must be run as root (to manipulate network namespaces and virtual
11# interfaces).
12#
13# Things we test for here:
14#
15# * Currently the kernel accepts addresses in 0/8 and 240/4 as valid.
16#
17# * Notwithstanding that, 0.0.0.0 and 255.255.255.255 cannot be assigned.
18#
19# * Currently the kernel DOES NOT accept unicast use of the lowest
20#   address in an IPv4 subnet (e.g. 192.168.100.0/32 in 192.168.100.0/24).
21#   This is treated as a second broadcast address, for compatibility
22#   with 4.2BSD (!).
23#
24# * Currently the kernel DOES NOT accept unicast use of any of 127/8.
25#
26# * Currently the kernel DOES NOT accept unicast use of any of 224/4.
27#
28# These tests provide an easy way to flip the expected result of any
29# of these behaviors for testing kernel patches that change them.
30
31source lib.sh
32
33check_gen_prog "nettest"
34
35result=0
36
37hide_output(){ exec 3>&1 4>&2 >/dev/null 2>/dev/null; }
38show_output(){ exec >&3 2>&4; }
39
40show_result(){
41	if [ $1 -eq 0 ]; then
42		printf "TEST: %-60s  [ OK ]\n" "${2}"
43	else
44		printf "TEST: %-60s  [FAIL]\n" "${2}"
45		result=1
46	fi
47}
48
49_do_segmenttest(){
50	# Perform a simple set of link tests between a pair of
51	# IP addresses on a shared (virtual) segment, using
52	# ping and nettest.
53	# foo --- bar
54	# Arguments: ip_a ip_b prefix_length test_description
55	#
56	# Caller must set up $foo_ns and $bar_ns namespaces
57	# containing linked veth devices foo and bar,
58	# respectively.
59
60	ip -n $foo_ns address add $1/$3 dev foo || return 1
61	ip -n $foo_ns link set foo up || return 1
62	ip -n $bar_ns address add $2/$3 dev bar || return 1
63	ip -n $bar_ns link set bar up || return 1
64
65	ip netns exec $foo_ns timeout 2 ping -c 1 $2 || return 1
66	ip netns exec $bar_ns timeout 2 ping -c 1 $1 || return 1
67
68	nettest -B -N $bar_ns -O $foo_ns -r $1 || return 1
69	nettest -B -N $foo_ns -O $bar_ns -r $2 || return 1
70
71	return 0
72}
73
74_do_route_test(){
75	# Perform a simple set of gateway tests.
76	#
77	# [foo] <---> [foo1]-[bar1] <---> [bar]   /prefix
78	#  host          gateway          host
79	#
80	# Arguments: foo_ip foo1_ip bar1_ip bar_ip prefix_len test_description
81	# Displays test result and returns success or failure.
82
83	# Caller must set up $foo_ns, $bar_ns, and $router_ns
84	# containing linked veth devices foo-foo1, bar1-bar
85	# (foo in $foo_ns, foo1 and bar1 in $router_ns, and
86	# bar in $bar_ns).
87
88	ip -n $foo_ns address add $1/$5 dev foo || return 1
89	ip -n $foo_ns link set foo up || return 1
90	ip -n $foo_ns route add default via $2 || return 1
91	ip -n $bar_ns address add $4/$5 dev bar || return 1
92	ip -n $bar_ns link set bar up || return 1
93	ip -n $bar_ns route add default via $3 || return 1
94	ip -n $router_ns address add $2/$5 dev foo1 || return 1
95	ip -n $router_ns link set foo1 up || return 1
96	ip -n $router_ns address add $3/$5 dev bar1 || return 1
97	ip -n $router_ns link set bar1 up || return 1
98
99	echo 1 | ip netns exec $router_ns tee /proc/sys/net/ipv4/ip_forward
100
101	ip netns exec $foo_ns timeout 2 ping -c 1 $2 || return 1
102	ip netns exec $foo_ns timeout 2 ping -c 1 $4 || return 1
103	ip netns exec $bar_ns timeout 2 ping -c 1 $3 || return 1
104	ip netns exec $bar_ns timeout 2 ping -c 1 $1 || return 1
105
106	nettest -B -N $bar_ns -O $foo_ns -r $1 || return 1
107	nettest -B -N $foo_ns -O $bar_ns -r $4 || return 1
108
109	return 0
110}
111
112segmenttest(){
113	# Sets up veth link and tries to connect over it.
114	# Arguments: ip_a ip_b prefix_len test_description
115	hide_output
116	setup_ns foo_ns bar_ns
117	ip link add foo netns $foo_ns type veth peer name bar netns $bar_ns
118
119	test_result=0
120	_do_segmenttest "$@" || test_result=1
121
122	ip netns pids $foo_ns | xargs -r kill -9
123	ip netns pids $bar_ns | xargs -r kill -9
124	cleanup_ns $foo_ns $bar_ns
125	show_output
126
127	# inverted tests will expect failure instead of success
128	[ -n "$expect_failure" ] && test_result=`expr 1 - $test_result`
129
130	show_result $test_result "$4"
131}
132
133route_test(){
134	# Sets up a simple gateway and tries to connect through it.
135	# [foo] <---> [foo1]-[bar1] <---> [bar]   /prefix
136	# Arguments: foo_ip foo1_ip bar1_ip bar_ip prefix_len test_description
137	# Returns success or failure.
138
139	hide_output
140	setup_ns foo_ns bar_ns router_ns
141	ip link add foo netns $foo_ns type veth peer name foo1 netns $router_ns
142	ip link add bar netns $bar_ns type veth peer name bar1 netns $router_ns
143
144	test_result=0
145	_do_route_test "$@" || test_result=1
146
147	ip netns pids $foo_ns | xargs -r kill -9
148	ip netns pids $bar_ns | xargs -r kill -9
149	ip netns pids $router_ns | xargs -r kill -9
150	cleanup_ns $foo_ns $bar_ns $router_ns
151
152	show_output
153
154	# inverted tests will expect failure instead of success
155	[ -n "$expect_failure" ] && test_result=`expr 1 - $test_result`
156	show_result $test_result "$6"
157}
158
159echo "###########################################################################"
160echo "Unicast address extensions tests (behavior of reserved IPv4 addresses)"
161echo "###########################################################################"
162#
163# Test support for 240/4
164segmenttest 240.1.2.1   240.1.2.4    24 "assign and ping within 240/4 (1 of 2) (is allowed)"
165segmenttest 250.100.2.1 250.100.30.4 16 "assign and ping within 240/4 (2 of 2) (is allowed)"
166#
167# Test support for 0/8
168segmenttest 0.1.2.17    0.1.2.23  24 "assign and ping within 0/8 (1 of 2) (is allowed)"
169segmenttest 0.77.240.17 0.77.2.23 16 "assign and ping within 0/8 (2 of 2) (is allowed)"
170#
171# Even 255.255/16 is OK!
172segmenttest 255.255.3.1 255.255.50.77 16 "assign and ping inside 255.255/16 (is allowed)"
173#
174# Or 255.255.255/24
175segmenttest 255.255.255.1 255.255.255.254 24 "assign and ping inside 255.255.255/24 (is allowed)"
176#
177# Routing between different networks
178route_test 240.5.6.7 240.5.6.1  255.1.2.1    255.1.2.3      24 "route between 240.5.6/24 and 255.1.2/24 (is allowed)"
179route_test 0.200.6.7 0.200.38.1 245.99.101.1 245.99.200.111 16 "route between 0.200/16 and 245.99/16 (is allowed)"
180#
181# Test support for lowest address ending in .0
182segmenttest 5.10.15.20 5.10.15.0 24 "assign and ping lowest address (/24)"
183#
184# Test support for lowest address not ending in .0
185segmenttest 192.168.101.192 192.168.101.193 26 "assign and ping lowest address (/26)"
186#
187# Routing using lowest address as a gateway/endpoint
188route_test 192.168.42.1 192.168.42.0 9.8.7.6 9.8.7.0 24 "routing using lowest address"
189#
190# ==============================================
191# ==== TESTS THAT CURRENTLY EXPECT FAILURE =====
192# ==============================================
193expect_failure=true
194# It should still not be possible to use 0.0.0.0 or 255.255.255.255
195# as a unicast address.  Thus, these tests expect failure.
196segmenttest 0.0.1.5       0.0.0.0         16 "assigning 0.0.0.0 (is forbidden)"
197segmenttest 255.255.255.1 255.255.255.255 16 "assigning 255.255.255.255 (is forbidden)"
198#
199# Test support for not having all of 127 be loopback
200# Currently Linux does not allow this, so this should fail too
201segmenttest 127.99.4.5 127.99.4.6 16 "assign and ping inside 127/8 (is forbidden)"
202#
203# Test support for unicast use of class D
204# Currently Linux does not allow this, so this should fail too
205segmenttest 225.1.2.3 225.1.2.200 24 "assign and ping class D address (is forbidden)"
206#
207# Routing using class D as a gateway
208route_test 225.1.42.1 225.1.42.2 9.8.7.6 9.8.7.1 24 "routing using class D (is forbidden)"
209#
210# Routing using 127/8
211# Currently Linux does not allow this, so this should fail too
212route_test 127.99.2.3 127.99.2.4 200.1.2.3 200.1.2.4 24 "routing using 127/8 (is forbidden)"
213#
214unset expect_failure
215# =====================================================
216# ==== END OF TESTS THAT CURRENTLY EXPECT FAILURE =====
217# =====================================================
218exit ${result}
219