xref: /linux/drivers/misc/ti-st/st_kim.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Shared Transport Line discipline driver Core
4  *	Init Manager module responsible for GPIO control
5  *	and firmware download
6  *  Copyright (C) 2009-2010 Texas Instruments
7  *  Author: Pavan Savoy <pavan_savoy@ti.com>
8  */
9 
10 #define pr_fmt(fmt) "(stk) :" fmt
11 #include <linux/platform_device.h>
12 #include <linux/jiffies.h>
13 #include <linux/firmware.h>
14 #include <linux/delay.h>
15 #include <linux/wait.h>
16 #include <linux/gpio.h>
17 #include <linux/debugfs.h>
18 #include <linux/seq_file.h>
19 #include <linux/sched.h>
20 #include <linux/sysfs.h>
21 #include <linux/tty.h>
22 
23 #include <linux/skbuff.h>
24 #include <linux/ti_wilink_st.h>
25 #include <linux/module.h>
26 
27 #define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
28 static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
29 
30 /**********************************************************************/
31 /* internal functions */
32 
33 /*
34  * st_get_plat_device -
35  *	function which returns the reference to the platform device
36  *	requested by id. As of now only 1 such device exists (id=0)
37  *	the context requesting for reference can get the id to be
38  *	requested by a. The protocol driver which is registering or
39  *	b. the tty device which is opened.
40  */
st_get_plat_device(int id)41 static struct platform_device *st_get_plat_device(int id)
42 {
43 	return st_kim_devices[id];
44 }
45 
46 /*
47  * validate_firmware_response -
48  *	function to return whether the firmware response was proper
49  *	in case of error don't complete so that waiting for proper
50  *	response times out
51  */
validate_firmware_response(struct kim_data_s * kim_gdata)52 static void validate_firmware_response(struct kim_data_s *kim_gdata)
53 {
54 	struct sk_buff *skb = kim_gdata->rx_skb;
55 	if (!skb)
56 		return;
57 
58 	/*
59 	 * these magic numbers are the position in the response buffer which
60 	 * allows us to distinguish whether the response is for the read
61 	 * version info. command
62 	 */
63 	if (skb->data[2] == 0x01 && skb->data[3] == 0x01 &&
64 			skb->data[4] == 0x10 && skb->data[5] == 0x00) {
65 		/* fw version response */
66 		memcpy(kim_gdata->resp_buffer,
67 				kim_gdata->rx_skb->data,
68 				kim_gdata->rx_skb->len);
69 		kim_gdata->rx_state = ST_W4_PACKET_TYPE;
70 		kim_gdata->rx_skb = NULL;
71 		kim_gdata->rx_count = 0;
72 	} else if (unlikely(skb->data[5] != 0)) {
73 		pr_err("no proper response during fw download");
74 		pr_err("data6 %x", skb->data[5]);
75 		kfree_skb(skb);
76 		return;		/* keep waiting for the proper response */
77 	}
78 	/* becos of all the script being downloaded */
79 	complete_all(&kim_gdata->kim_rcvd);
80 	kfree_skb(skb);
81 }
82 
83 /*
84  * check for data len received inside kim_int_recv
85  * most often hit the last case to update state to waiting for data
86  */
kim_check_data_len(struct kim_data_s * kim_gdata,int len)87 static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
88 {
89 	register int room = skb_tailroom(kim_gdata->rx_skb);
90 
91 	pr_debug("len %d room %d", len, room);
92 
93 	if (!len) {
94 		validate_firmware_response(kim_gdata);
95 	} else if (len > room) {
96 		/*
97 		 * Received packet's payload length is larger.
98 		 * We can't accommodate it in created skb.
99 		 */
100 		pr_err("Data length is too large len %d room %d", len,
101 			   room);
102 		kfree_skb(kim_gdata->rx_skb);
103 	} else {
104 		/*
105 		 * Packet header has non-zero payload length and
106 		 * we have enough space in created skb. Lets read
107 		 * payload data */
108 		kim_gdata->rx_state = ST_W4_DATA;
109 		kim_gdata->rx_count = len;
110 		return len;
111 	}
112 
113 	/*
114 	 * Change ST LL state to continue to process next
115 	 * packet
116 	 */
117 	kim_gdata->rx_state = ST_W4_PACKET_TYPE;
118 	kim_gdata->rx_skb = NULL;
119 	kim_gdata->rx_count = 0;
120 
121 	return 0;
122 }
123 
124 /*
125  * kim_int_recv - receive function called during firmware download
126  *	firmware download responses on different UART drivers
127  *	have been observed to come in bursts of different
128  *	tty_receive and hence the logic
129  */
kim_int_recv(struct kim_data_s * kim_gdata,const u8 * ptr,size_t count)130 static void kim_int_recv(struct kim_data_s *kim_gdata, const u8 *ptr,
131 			 size_t count)
132 {
133 	int len = 0;
134 	unsigned char *plen;
135 
136 	pr_debug("%s", __func__);
137 	/* Decode received bytes here */
138 	while (count) {
139 		if (kim_gdata->rx_count) {
140 			len = min_t(unsigned int, kim_gdata->rx_count, count);
141 			skb_put_data(kim_gdata->rx_skb, ptr, len);
142 			kim_gdata->rx_count -= len;
143 			count -= len;
144 			ptr += len;
145 
146 			if (kim_gdata->rx_count)
147 				continue;
148 
149 			/* Check ST RX state machine , where are we? */
150 			switch (kim_gdata->rx_state) {
151 				/* Waiting for complete packet ? */
152 			case ST_W4_DATA:
153 				pr_debug("Complete pkt received");
154 				validate_firmware_response(kim_gdata);
155 				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
156 				kim_gdata->rx_skb = NULL;
157 				continue;
158 				/* Waiting for Bluetooth event header ? */
159 			case ST_W4_HEADER:
160 				plen =
161 				(unsigned char *)&kim_gdata->rx_skb->data[1];
162 				pr_debug("event hdr: plen 0x%02x\n", *plen);
163 				kim_check_data_len(kim_gdata, *plen);
164 				continue;
165 			}	/* end of switch */
166 		}		/* end of if rx_state */
167 		switch (*ptr) {
168 			/* Bluetooth event packet? */
169 		case 0x04:
170 			kim_gdata->rx_state = ST_W4_HEADER;
171 			kim_gdata->rx_count = 2;
172 			break;
173 		default:
174 			pr_info("unknown packet");
175 			ptr++;
176 			count--;
177 			continue;
178 		}
179 		ptr++;
180 		count--;
181 		kim_gdata->rx_skb =
182 			alloc_skb(1024+8, GFP_ATOMIC);
183 		if (!kim_gdata->rx_skb) {
184 			pr_err("can't allocate mem for new packet");
185 			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
186 			kim_gdata->rx_count = 0;
187 			return;
188 		}
189 		skb_reserve(kim_gdata->rx_skb, 8);
190 		kim_gdata->rx_skb->cb[0] = 4;
191 		kim_gdata->rx_skb->cb[1] = 0;
192 
193 	}
194 	return;
195 }
196 
read_local_version(struct kim_data_s * kim_gdata,char * bts_scr_name)197 static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
198 {
199 	unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
200 	static const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
201 	long time_left;
202 
203 	pr_debug("%s", __func__);
204 
205 	reinit_completion(&kim_gdata->kim_rcvd);
206 	if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
207 		pr_err("kim: couldn't write 4 bytes");
208 		return -EIO;
209 	}
210 
211 	time_left = wait_for_completion_interruptible_timeout(
212 		&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME));
213 	if (time_left <= 0) {
214 		pr_err(" waiting for ver info- timed out or received signal");
215 		return time_left ? -ERESTARTSYS : -ETIMEDOUT;
216 	}
217 	reinit_completion(&kim_gdata->kim_rcvd);
218 	/*
219 	 * the positions 12 & 13 in the response buffer provide with the
220 	 * chip, major & minor numbers
221 	 */
222 
223 	version =
224 		MAKEWORD(kim_gdata->resp_buffer[12],
225 				kim_gdata->resp_buffer[13]);
226 	chip = (version & 0x7C00) >> 10;
227 	min_ver = (version & 0x007F);
228 	maj_ver = (version & 0x0380) >> 7;
229 
230 	if (version & 0x8000)
231 		maj_ver |= 0x0008;
232 
233 	sprintf(bts_scr_name, "ti-connectivity/TIInit_%d.%d.%d.bts",
234 		chip, maj_ver, min_ver);
235 
236 	/* to be accessed later via sysfs entry */
237 	kim_gdata->version.full = version;
238 	kim_gdata->version.chip = chip;
239 	kim_gdata->version.maj_ver = maj_ver;
240 	kim_gdata->version.min_ver = min_ver;
241 
242 	pr_info("%s", bts_scr_name);
243 	return 0;
244 }
245 
skip_change_remote_baud(unsigned char ** ptr,long * len)246 static void skip_change_remote_baud(unsigned char **ptr, long *len)
247 {
248 	unsigned char *nxt_action, *cur_action;
249 	cur_action = *ptr;
250 
251 	nxt_action = cur_action + sizeof(struct bts_action) +
252 		((struct bts_action *) cur_action)->size;
253 
254 	if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
255 		pr_err("invalid action after change remote baud command");
256 	} else {
257 		*ptr = *ptr + sizeof(struct bts_action) +
258 			((struct bts_action *)cur_action)->size;
259 		*len = *len - (sizeof(struct bts_action) +
260 				((struct bts_action *)cur_action)->size);
261 		/* warn user on not commenting these in firmware */
262 		pr_warn("skipping the wait event of change remote baud");
263 	}
264 }
265 
266 /*
267  * download_firmware -
268  *	internal function which parses through the .bts firmware
269  *	script file intreprets SEND, DELAY actions only as of now
270  */
download_firmware(struct kim_data_s * kim_gdata)271 static long download_firmware(struct kim_data_s *kim_gdata)
272 {
273 	long err = 0;
274 	long len = 0;
275 	unsigned char *ptr = NULL;
276 	unsigned char *action_ptr = NULL;
277 	unsigned char bts_scr_name[40] = { 0 };	/* 40 char long bts scr name? */
278 	int wr_room_space;
279 	int cmd_size;
280 	unsigned long timeout;
281 
282 	err = read_local_version(kim_gdata, bts_scr_name);
283 	if (err != 0) {
284 		pr_err("kim: failed to read local ver");
285 		return err;
286 	}
287 	err =
288 	    request_firmware(&kim_gdata->fw_entry, bts_scr_name,
289 			     &kim_gdata->kim_pdev->dev);
290 	if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
291 		     (kim_gdata->fw_entry->size == 0))) {
292 		pr_err(" request_firmware failed(errno %ld) for %s", err,
293 			   bts_scr_name);
294 		return -EINVAL;
295 	}
296 	ptr = (void *)kim_gdata->fw_entry->data;
297 	len = kim_gdata->fw_entry->size;
298 	/*
299 	 * bts_header to remove out magic number and
300 	 * version
301 	 */
302 	ptr += sizeof(struct bts_header);
303 	len -= sizeof(struct bts_header);
304 
305 	while (len > 0 && ptr) {
306 		pr_debug(" action size %d, type %d ",
307 			   ((struct bts_action *)ptr)->size,
308 			   ((struct bts_action *)ptr)->type);
309 
310 		switch (((struct bts_action *)ptr)->type) {
311 		case ACTION_SEND_COMMAND:	/* action send */
312 			pr_debug("S");
313 			action_ptr = &(((struct bts_action *)ptr)->data[0]);
314 			if (unlikely
315 			    (((struct hci_command *)action_ptr)->opcode ==
316 			     0xFF36)) {
317 				/*
318 				 * ignore remote change
319 				 * baud rate HCI VS command
320 				 */
321 				pr_warn("change remote baud"
322 				    " rate command in firmware");
323 				skip_change_remote_baud(&ptr, &len);
324 				break;
325 			}
326 			/*
327 			 * Make sure we have enough free space in uart
328 			 * tx buffer to write current firmware command
329 			 */
330 			cmd_size = ((struct bts_action *)ptr)->size;
331 			timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
332 			do {
333 				wr_room_space =
334 					st_get_uart_wr_room(kim_gdata->core_data);
335 				if (wr_room_space < 0) {
336 					pr_err("Unable to get free "
337 							"space info from uart tx buffer");
338 					release_firmware(kim_gdata->fw_entry);
339 					return wr_room_space;
340 				}
341 				mdelay(1); /* wait 1ms before checking room */
342 			} while ((wr_room_space < cmd_size) &&
343 					time_before(jiffies, timeout));
344 
345 			/* Timeout happened ? */
346 			if (time_after_eq(jiffies, timeout)) {
347 				pr_err("Timeout while waiting for free "
348 						"free space in uart tx buffer");
349 				release_firmware(kim_gdata->fw_entry);
350 				return -ETIMEDOUT;
351 			}
352 			/*
353 			 * reinit completion before sending for the
354 			 * relevant wait
355 			 */
356 			reinit_completion(&kim_gdata->kim_rcvd);
357 
358 			/*
359 			 * Free space found in uart buffer, call st_int_write
360 			 * to send current firmware command to the uart tx
361 			 * buffer.
362 			 */
363 			err = st_int_write(kim_gdata->core_data,
364 			((struct bts_action_send *)action_ptr)->data,
365 					   ((struct bts_action *)ptr)->size);
366 			if (unlikely(err < 0)) {
367 				release_firmware(kim_gdata->fw_entry);
368 				return err;
369 			}
370 			/*
371 			 * Check number of bytes written to the uart tx buffer
372 			 * and requested command write size
373 			 */
374 			if (err != cmd_size) {
375 				pr_err("Number of bytes written to uart "
376 						"tx buffer are not matching with "
377 						"requested cmd write size");
378 				release_firmware(kim_gdata->fw_entry);
379 				return -EIO;
380 			}
381 			break;
382 		case ACTION_WAIT_EVENT:  /* wait */
383 			pr_debug("W");
384 			err = wait_for_completion_interruptible_timeout(
385 					&kim_gdata->kim_rcvd,
386 					msecs_to_jiffies(CMD_RESP_TIME));
387 			if (err <= 0) {
388 				pr_err("response timeout/signaled during fw download ");
389 				/* timed out */
390 				release_firmware(kim_gdata->fw_entry);
391 				return err ? -ERESTARTSYS : -ETIMEDOUT;
392 			}
393 			reinit_completion(&kim_gdata->kim_rcvd);
394 			break;
395 		case ACTION_DELAY:	/* sleep */
396 			pr_info("sleep command in scr");
397 			action_ptr = &(((struct bts_action *)ptr)->data[0]);
398 			mdelay(((struct bts_action_delay *)action_ptr)->msec);
399 			break;
400 		}
401 		len =
402 		    len - (sizeof(struct bts_action) +
403 			   ((struct bts_action *)ptr)->size);
404 		ptr =
405 		    ptr + sizeof(struct bts_action) +
406 		    ((struct bts_action *)ptr)->size;
407 	}
408 	/* fw download complete */
409 	release_firmware(kim_gdata->fw_entry);
410 	return 0;
411 }
412 
413 /**********************************************************************/
414 /* functions called from ST core */
415 /* called from ST Core, when REG_IN_PROGRESS (registration in progress)
416  * can be because of
417  * 1. response to read local version
418  * 2. during send/recv's of firmware download
419  */
st_kim_recv(void * disc_data,const u8 * data,size_t count)420 void st_kim_recv(void *disc_data, const u8 *data, size_t count)
421 {
422 	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
423 	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
424 
425 	/*
426 	 * proceed to gather all data and distinguish read fw version response
427 	 * from other fw responses when data gathering is complete
428 	 */
429 	kim_int_recv(kim_gdata, data, count);
430 	return;
431 }
432 
433 /*
434  * to signal completion of line discipline installation
435  * called from ST Core, upon tty_open
436  */
st_kim_complete(void * kim_data)437 void st_kim_complete(void *kim_data)
438 {
439 	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
440 	complete(&kim_gdata->ldisc_installed);
441 }
442 
443 /*
444  * st_kim_start - called from ST Core upon 1st registration
445  *	This involves toggling the chip enable gpio, reading
446  *	the firmware version from chip, forming the fw file name
447  *	based on the chip version, requesting the fw, parsing it
448  *	and perform download(send/recv).
449  */
st_kim_start(void * kim_data)450 long st_kim_start(void *kim_data)
451 {
452 	long err = 0;
453 	long retry = POR_RETRY_COUNT;
454 	struct ti_st_plat_data	*pdata;
455 	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
456 
457 	pr_info(" %s", __func__);
458 	pdata = kim_gdata->kim_pdev->dev.platform_data;
459 
460 	do {
461 		/* platform specific enabling code here */
462 		if (pdata->chip_enable)
463 			pdata->chip_enable(kim_gdata);
464 
465 		/* Configure BT nShutdown to HIGH state */
466 		gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW);
467 		mdelay(5);	/* FIXME: a proper toggle */
468 		gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH);
469 		mdelay(100);
470 		/* re-initialize the completion */
471 		reinit_completion(&kim_gdata->ldisc_installed);
472 		/* send notification to UIM */
473 		kim_gdata->ldisc_install = 1;
474 		pr_info("ldisc_install = 1");
475 		sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
476 				NULL, "install");
477 		/* wait for ldisc to be installed */
478 		err = wait_for_completion_interruptible_timeout(
479 			&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
480 		if (!err) {
481 			/*
482 			 * ldisc installation timeout,
483 			 * flush uart, power cycle BT_EN
484 			 */
485 			pr_err("ldisc installation timeout");
486 			err = st_kim_stop(kim_gdata);
487 			continue;
488 		} else {
489 			/* ldisc installed now */
490 			pr_info("line discipline installed");
491 			err = download_firmware(kim_gdata);
492 			if (err != 0) {
493 				/*
494 				 * ldisc installed but fw download failed,
495 				 * flush uart & power cycle BT_EN
496 				 */
497 				pr_err("download firmware failed");
498 				err = st_kim_stop(kim_gdata);
499 				continue;
500 			} else {	/* on success don't retry */
501 				break;
502 			}
503 		}
504 	} while (retry--);
505 	return err;
506 }
507 
508 /*
509  * st_kim_stop - stop communication with chip.
510  *	This can be called from ST Core/KIM, on the-
511  *	(a) last un-register when chip need not be powered there-after,
512  *	(b) upon failure to either install ldisc or download firmware.
513  *	The function is responsible to (a) notify UIM about un-installation,
514  *	(b) flush UART if the ldisc was installed.
515  *	(c) reset BT_EN - pull down nshutdown at the end.
516  *	(d) invoke platform's chip disabling routine.
517  */
st_kim_stop(void * kim_data)518 long st_kim_stop(void *kim_data)
519 {
520 	long err = 0;
521 	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
522 	struct ti_st_plat_data	*pdata =
523 		kim_gdata->kim_pdev->dev.platform_data;
524 	struct tty_struct	*tty = kim_gdata->core_data->tty;
525 
526 	reinit_completion(&kim_gdata->ldisc_installed);
527 
528 	if (tty) {	/* can be called before ldisc is installed */
529 		/* Flush any pending characters in the driver and discipline. */
530 		tty_ldisc_flush(tty);
531 		tty_driver_flush_buffer(tty);
532 	}
533 
534 	/* send uninstall notification to UIM */
535 	pr_info("ldisc_install = 0");
536 	kim_gdata->ldisc_install = 0;
537 	sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
538 
539 	/* wait for ldisc to be un-installed */
540 	err = wait_for_completion_interruptible_timeout(
541 		&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
542 	if (!err) {		/* timeout */
543 		pr_err(" timed out waiting for ldisc to be un-installed");
544 		err = -ETIMEDOUT;
545 	}
546 
547 	/* By default configure BT nShutdown to LOW state */
548 	gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW);
549 	mdelay(1);
550 	gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH);
551 	mdelay(1);
552 	gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW);
553 
554 	/* platform specific disable */
555 	if (pdata->chip_disable)
556 		pdata->chip_disable(kim_gdata);
557 	return err;
558 }
559 
560 /**********************************************************************/
561 /* functions called from subsystems */
562 /* called when debugfs entry is read from */
563 
version_show(struct seq_file * s,void * unused)564 static int version_show(struct seq_file *s, void *unused)
565 {
566 	struct kim_data_s *kim_gdata = s->private;
567 	seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
568 			kim_gdata->version.chip, kim_gdata->version.maj_ver,
569 			kim_gdata->version.min_ver);
570 	return 0;
571 }
572 
list_show(struct seq_file * s,void * unused)573 static int list_show(struct seq_file *s, void *unused)
574 {
575 	struct kim_data_s *kim_gdata = s->private;
576 	kim_st_list_protocols(kim_gdata->core_data, s);
577 	return 0;
578 }
579 
show_install(struct device * dev,struct device_attribute * attr,char * buf)580 static ssize_t show_install(struct device *dev,
581 		struct device_attribute *attr, char *buf)
582 {
583 	struct kim_data_s *kim_data = dev_get_drvdata(dev);
584 	return sprintf(buf, "%d\n", kim_data->ldisc_install);
585 }
586 
587 #ifdef DEBUG
store_dev_name(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)588 static ssize_t store_dev_name(struct device *dev,
589 		struct device_attribute *attr, const char *buf, size_t count)
590 {
591 	struct kim_data_s *kim_data = dev_get_drvdata(dev);
592 	pr_debug("storing dev name >%s<", buf);
593 	strscpy(kim_data->dev_name, buf, sizeof(kim_data->dev_name));
594 	pr_debug("stored dev name >%s<", kim_data->dev_name);
595 	return count;
596 }
597 
store_baud_rate(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)598 static ssize_t store_baud_rate(struct device *dev,
599 		struct device_attribute *attr, const char *buf, size_t count)
600 {
601 	struct kim_data_s *kim_data = dev_get_drvdata(dev);
602 	pr_debug("storing baud rate >%s<", buf);
603 	sscanf(buf, "%ld", &kim_data->baud_rate);
604 	pr_debug("stored baud rate >%ld<", kim_data->baud_rate);
605 	return count;
606 }
607 #endif	/* if DEBUG */
608 
show_dev_name(struct device * dev,struct device_attribute * attr,char * buf)609 static ssize_t show_dev_name(struct device *dev,
610 		struct device_attribute *attr, char *buf)
611 {
612 	struct kim_data_s *kim_data = dev_get_drvdata(dev);
613 	return sprintf(buf, "%s\n", kim_data->dev_name);
614 }
615 
show_baud_rate(struct device * dev,struct device_attribute * attr,char * buf)616 static ssize_t show_baud_rate(struct device *dev,
617 		struct device_attribute *attr, char *buf)
618 {
619 	struct kim_data_s *kim_data = dev_get_drvdata(dev);
620 	return sprintf(buf, "%d\n", kim_data->baud_rate);
621 }
622 
show_flow_cntrl(struct device * dev,struct device_attribute * attr,char * buf)623 static ssize_t show_flow_cntrl(struct device *dev,
624 		struct device_attribute *attr, char *buf)
625 {
626 	struct kim_data_s *kim_data = dev_get_drvdata(dev);
627 	return sprintf(buf, "%d\n", kim_data->flow_cntrl);
628 }
629 
630 /* structures specific for sysfs entries */
631 static struct kobj_attribute ldisc_install =
632 __ATTR(install, 0444, (void *)show_install, NULL);
633 
634 static struct kobj_attribute uart_dev_name =
635 #ifdef DEBUG	/* TODO: move this to debug-fs if possible */
636 __ATTR(dev_name, 0644, (void *)show_dev_name, (void *)store_dev_name);
637 #else
638 __ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
639 #endif
640 
641 static struct kobj_attribute uart_baud_rate =
642 #ifdef DEBUG	/* TODO: move to debugfs */
643 __ATTR(baud_rate, 0644, (void *)show_baud_rate, (void *)store_baud_rate);
644 #else
645 __ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
646 #endif
647 
648 static struct kobj_attribute uart_flow_cntrl =
649 __ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);
650 
651 static struct attribute *uim_attrs[] = {
652 	&ldisc_install.attr,
653 	&uart_dev_name.attr,
654 	&uart_baud_rate.attr,
655 	&uart_flow_cntrl.attr,
656 	NULL,
657 };
658 
659 static const struct attribute_group uim_attr_grp = {
660 	.attrs = uim_attrs,
661 };
662 
663 /*
664  * st_kim_ref - reference the core's data
665  *	This references the per-ST platform device in the arch/xx/
666  *	board-xx.c file.
667  *	This would enable multiple such platform devices to exist
668  *	on a given platform
669  */
st_kim_ref(struct st_data_s ** core_data,int id)670 void st_kim_ref(struct st_data_s **core_data, int id)
671 {
672 	struct platform_device	*pdev;
673 	struct kim_data_s	*kim_gdata;
674 	/* get kim_gdata reference from platform device */
675 	pdev = st_get_plat_device(id);
676 	if (!pdev)
677 		goto err;
678 	kim_gdata = platform_get_drvdata(pdev);
679 	if (!kim_gdata)
680 		goto err;
681 
682 	*core_data = kim_gdata->core_data;
683 	return;
684 err:
685 	*core_data = NULL;
686 }
687 
688 DEFINE_SHOW_ATTRIBUTE(version);
689 DEFINE_SHOW_ATTRIBUTE(list);
690 
691 /**********************************************************************/
692 /* functions called from platform device driver subsystem
693  * need to have a relevant platform device entry in the platform's
694  * board-*.c file
695  */
696 
697 static struct dentry *kim_debugfs_dir;
kim_probe(struct platform_device * pdev)698 static int kim_probe(struct platform_device *pdev)
699 {
700 	struct kim_data_s	*kim_gdata;
701 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
702 	int err;
703 
704 	if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
705 		/* multiple devices could exist */
706 		st_kim_devices[pdev->id] = pdev;
707 	} else {
708 		/* platform's sure about existence of 1 device */
709 		st_kim_devices[0] = pdev;
710 	}
711 
712 	kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_KERNEL);
713 	if (!kim_gdata) {
714 		pr_err("no mem to allocate");
715 		return -ENOMEM;
716 	}
717 	platform_set_drvdata(pdev, kim_gdata);
718 
719 	err = st_core_init(&kim_gdata->core_data);
720 	if (err != 0) {
721 		pr_err(" ST core init failed");
722 		err = -EIO;
723 		goto err_core_init;
724 	}
725 	/* refer to itself */
726 	kim_gdata->core_data->kim_data = kim_gdata;
727 
728 	/* Claim the chip enable nShutdown gpio from the system */
729 	kim_gdata->nshutdown = pdata->nshutdown_gpio;
730 	err = gpio_request(kim_gdata->nshutdown, "kim");
731 	if (unlikely(err)) {
732 		pr_err(" gpio %d request failed ", kim_gdata->nshutdown);
733 		goto err_sysfs_group;
734 	}
735 
736 	/* Configure nShutdown GPIO as output=0 */
737 	err = gpio_direction_output(kim_gdata->nshutdown, 0);
738 	if (unlikely(err)) {
739 		pr_err(" unable to configure gpio %d", kim_gdata->nshutdown);
740 		goto err_sysfs_group;
741 	}
742 	/* get reference of pdev for request_firmware */
743 	kim_gdata->kim_pdev = pdev;
744 	init_completion(&kim_gdata->kim_rcvd);
745 	init_completion(&kim_gdata->ldisc_installed);
746 
747 	err = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
748 	if (err) {
749 		pr_err("failed to create sysfs entries");
750 		goto err_sysfs_group;
751 	}
752 
753 	/* copying platform data */
754 	strscpy(kim_gdata->dev_name, pdata->dev_name,
755 		sizeof(kim_gdata->dev_name));
756 	kim_gdata->flow_cntrl = pdata->flow_cntrl;
757 	kim_gdata->baud_rate = pdata->baud_rate;
758 	pr_info("sysfs entries created\n");
759 
760 	kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
761 
762 	debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
763 				kim_gdata, &version_fops);
764 	debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
765 				kim_gdata, &list_fops);
766 	return 0;
767 
768 err_sysfs_group:
769 	st_core_exit(kim_gdata->core_data);
770 
771 err_core_init:
772 	kfree(kim_gdata);
773 
774 	return err;
775 }
776 
kim_remove(struct platform_device * pdev)777 static void kim_remove(struct platform_device *pdev)
778 {
779 	/* free the GPIOs requested */
780 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
781 	struct kim_data_s	*kim_gdata;
782 
783 	kim_gdata = platform_get_drvdata(pdev);
784 
785 	/*
786 	 * Free the Bluetooth/FM/GPIO
787 	 * nShutdown gpio from the system
788 	 */
789 	gpio_free(pdata->nshutdown_gpio);
790 	pr_info("nshutdown GPIO Freed");
791 
792 	debugfs_remove_recursive(kim_debugfs_dir);
793 	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
794 	pr_info("sysfs entries removed");
795 
796 	kim_gdata->kim_pdev = NULL;
797 	st_core_exit(kim_gdata->core_data);
798 
799 	kfree(kim_gdata);
800 	kim_gdata = NULL;
801 }
802 
kim_suspend(struct platform_device * pdev,pm_message_t state)803 static int kim_suspend(struct platform_device *pdev, pm_message_t state)
804 {
805 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
806 
807 	if (pdata->suspend)
808 		return pdata->suspend(pdev, state);
809 
810 	return 0;
811 }
812 
kim_resume(struct platform_device * pdev)813 static int kim_resume(struct platform_device *pdev)
814 {
815 	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
816 
817 	if (pdata->resume)
818 		return pdata->resume(pdev);
819 
820 	return 0;
821 }
822 
823 /**********************************************************************/
824 /* entry point for ST KIM module, called in from ST Core */
825 static struct platform_driver kim_platform_driver = {
826 	.probe = kim_probe,
827 	.remove_new = kim_remove,
828 	.suspend = kim_suspend,
829 	.resume = kim_resume,
830 	.driver = {
831 		.name = "kim",
832 	},
833 };
834 
835 module_platform_driver(kim_platform_driver);
836 
837 MODULE_AUTHOR("Pavan Savoy <pavan_savoy@ti.com>");
838 MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
839 MODULE_LICENSE("GPL");
840