1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (c) 2015, The Linux Foundation. All rights reserved.
4 *
5 * GPIO and pin control functions on this SOC are handled by the "TLMM"
6 * device. The driver which controls this device is pinctrl-msm.c. Each
7 * SOC with a TLMM is expected to create a client driver that registers
8 * with pinctrl-msm.c. This means that all TLMM drivers are pin control
9 * drivers.
10 *
11 * This pin control driver is intended to be used only an ACPI-enabled
12 * system. As such, UEFI will handle all pin control configuration, so
13 * this driver does not provide pin control functions. It is effectively
14 * a GPIO-only driver. The alternative is to duplicate the GPIO code of
15 * pinctrl-msm.c into another driver.
16 */
17
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/pinctrl/pinctrl.h>
21 #include <linux/acpi.h>
22
23 #include "pinctrl-msm.h"
24
25 /* A maximum of 256 allows us to use a u8 array to hold the GPIO numbers */
26 #define MAX_GPIOS 256
27
28 /* maximum size of each gpio name (enough room for "gpioXXX" + null) */
29 #define NAME_SIZE 8
30
qdf2xxx_pinctrl_probe(struct platform_device * pdev)31 static int qdf2xxx_pinctrl_probe(struct platform_device *pdev)
32 {
33 struct msm_pinctrl_soc_data *pinctrl;
34 struct pinctrl_pin_desc *pins;
35 struct msm_pingroup *groups;
36 char (*names)[NAME_SIZE];
37 unsigned int i;
38 u32 num_gpios;
39 unsigned int avail_gpios; /* The number of GPIOs we support */
40 u8 gpios[MAX_GPIOS]; /* An array of supported GPIOs */
41 int ret;
42
43 /* Query the number of GPIOs from ACPI */
44 ret = device_property_read_u32(&pdev->dev, "num-gpios", &num_gpios);
45 if (ret < 0) {
46 dev_err(&pdev->dev, "missing 'num-gpios' property\n");
47 return ret;
48 }
49 if (!num_gpios || num_gpios > MAX_GPIOS) {
50 dev_err(&pdev->dev, "invalid 'num-gpios' property\n");
51 return -ENODEV;
52 }
53
54 /* The number of GPIOs in the approved list */
55 ret = device_property_count_u8(&pdev->dev, "gpios");
56 if (ret < 0) {
57 dev_err(&pdev->dev, "missing 'gpios' property\n");
58 return ret;
59 }
60 /*
61 * The number of available GPIOs should be non-zero, and no
62 * more than the total number of GPIOS.
63 */
64 if (!ret || ret > num_gpios) {
65 dev_err(&pdev->dev, "invalid 'gpios' property\n");
66 return -ENODEV;
67 }
68 avail_gpios = ret;
69
70 ret = device_property_read_u8_array(&pdev->dev, "gpios", gpios,
71 avail_gpios);
72 if (ret < 0) {
73 dev_err(&pdev->dev, "could not read list of GPIOs\n");
74 return ret;
75 }
76
77 pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
78 pins = devm_kcalloc(&pdev->dev, num_gpios,
79 sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
80 groups = devm_kcalloc(&pdev->dev, num_gpios,
81 sizeof(struct msm_pingroup), GFP_KERNEL);
82 names = devm_kcalloc(&pdev->dev, avail_gpios, NAME_SIZE, GFP_KERNEL);
83
84 if (!pinctrl || !pins || !groups || !names)
85 return -ENOMEM;
86
87 /*
88 * Initialize the array. GPIOs not listed in the 'gpios' array
89 * still need a number, but nothing else.
90 */
91 for (i = 0; i < num_gpios; i++) {
92 pins[i].number = i;
93 groups[i].grp.pins = &pins[i].number;
94 }
95
96 /* Populate the entries that are meant to be exposed as GPIOs. */
97 for (i = 0; i < avail_gpios; i++) {
98 unsigned int gpio = gpios[i];
99
100 groups[gpio].grp.npins = 1;
101 snprintf(names[i], NAME_SIZE, "gpio%u", gpio);
102 pins[gpio].name = names[i];
103 groups[gpio].grp.name = names[i];
104
105 groups[gpio].ctl_reg = 0x10000 * gpio;
106 groups[gpio].io_reg = 0x04 + 0x10000 * gpio;
107 groups[gpio].intr_cfg_reg = 0x08 + 0x10000 * gpio;
108 groups[gpio].intr_status_reg = 0x0c + 0x10000 * gpio;
109 groups[gpio].intr_target_reg = 0x08 + 0x10000 * gpio;
110
111 groups[gpio].mux_bit = 2;
112 groups[gpio].pull_bit = 0;
113 groups[gpio].drv_bit = 6;
114 groups[gpio].oe_bit = 9;
115 groups[gpio].in_bit = 0;
116 groups[gpio].out_bit = 1;
117 groups[gpio].intr_enable_bit = 0;
118 groups[gpio].intr_status_bit = 0;
119 groups[gpio].intr_target_bit = 5;
120 groups[gpio].intr_target_kpss_val = 1;
121 groups[gpio].intr_raw_status_bit = 4;
122 groups[gpio].intr_polarity_bit = 1;
123 groups[gpio].intr_detection_bit = 2;
124 groups[gpio].intr_detection_width = 2;
125 }
126
127 pinctrl->pins = pins;
128 pinctrl->groups = groups;
129 pinctrl->npins = num_gpios;
130 pinctrl->ngroups = num_gpios;
131 pinctrl->ngpios = num_gpios;
132
133 return msm_pinctrl_probe(pdev, pinctrl);
134 }
135
136 static const struct acpi_device_id qdf2xxx_acpi_ids[] = {
137 {"QCOM8002"},
138 {},
139 };
140 MODULE_DEVICE_TABLE(acpi, qdf2xxx_acpi_ids);
141
142 static struct platform_driver qdf2xxx_pinctrl_driver = {
143 .driver = {
144 .name = "qdf2xxx-pinctrl",
145 .acpi_match_table = qdf2xxx_acpi_ids,
146 },
147 .probe = qdf2xxx_pinctrl_probe,
148 .remove_new = msm_pinctrl_remove,
149 };
150
qdf2xxx_pinctrl_init(void)151 static int __init qdf2xxx_pinctrl_init(void)
152 {
153 return platform_driver_register(&qdf2xxx_pinctrl_driver);
154 }
155 arch_initcall(qdf2xxx_pinctrl_init);
156
qdf2xxx_pinctrl_exit(void)157 static void __exit qdf2xxx_pinctrl_exit(void)
158 {
159 platform_driver_unregister(&qdf2xxx_pinctrl_driver);
160 }
161 module_exit(qdf2xxx_pinctrl_exit);
162
163 MODULE_DESCRIPTION("Qualcomm Technologies QDF2xxx pin control driver");
164 MODULE_LICENSE("GPL v2");
165