1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Native support for the Aiptek HyperPen USB Tablets
4 * (4000U/5000U/6000U/8000U/12000U)
5 *
6 * Copyright (c) 2001 Chris Atenasio <chris@crud.net>
7 * Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
8 *
9 * based on wacom.c by
10 * Vojtech Pavlik <vojtech@suse.cz>
11 * Andreas Bach Aaen <abach@stofanet.dk>
12 * Clifford Wolf <clifford@clifford.at>
13 * Sam Mosel <sam.mosel@computer.org>
14 * James E. Blair <corvus@gnu.org>
15 * Daniel Egger <egger@suse.de>
16 *
17 * Many thanks to Oliver Kuechemann for his support.
18 *
19 * ChangeLog:
20 * v0.1 - Initial release
21 * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
22 * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
23 * Released to Linux 2.4.19 and 2.5.x
24 * v0.4 - Rewrote substantial portions of the code to deal with
25 * corrected control sequences, timing, dynamic configuration,
26 * support of 6000U - 12000U, procfs, and macro key support
27 * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
28 * v1.0 - Added support for diagnostic messages, count of messages
29 * received from URB - Mar-8-2003, Bryan W. Headley
30 * v1.1 - added support for tablet resolution, changed DV and proximity
31 * some corrections - Jun-22-2003, martin schneebacher
32 * - Added support for the sysfs interface, deprecating the
33 * procfs interface for 2.5.x kernel. Also added support for
34 * Wheel command. Bryan W. Headley July-15-2003.
35 * v1.2 - Reworked jitter timer as a kernel thread.
36 * Bryan W. Headley November-28-2003/Jan-10-2004.
37 * v1.3 - Repaired issue of kernel thread going nuts on single-processor
38 * machines, introduced programmableDelay as a command line
39 * parameter. Feb 7 2004, Bryan W. Headley.
40 * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
41 * Rene van Paassen. Added reporting of physical pointer device
42 * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
43 * for reports 1, 6.)
44 * what physical device reports for reports 1, 6.) Also enabled
45 * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
46 * Feb 20, 2004, Bryan W. Headley.
47 * v1.5 - Added previousJitterable, so we don't do jitter delay when the
48 * user is holding a button down for periods of time.
49 *
50 * NOTE:
51 * This kernel driver is augmented by the "Aiptek" XFree86 input
52 * driver for your X server, as well as the Gaiptek GUI Front-end
53 * "Tablet Manager".
54 * These three products are highly interactive with one another,
55 * so therefore it's easier to document them all as one subsystem.
56 * Please visit the project's "home page", located at,
57 * http://aiptektablet.sourceforge.net.
58 */
59
60 #include <linux/jiffies.h>
61 #include <linux/kernel.h>
62 #include <linux/slab.h>
63 #include <linux/module.h>
64 #include <linux/usb/input.h>
65 #include <linux/uaccess.h>
66 #include <linux/unaligned.h>
67
68 /*
69 * Aiptek status packet:
70 *
71 * (returned as Report 1 - relative coordinates from mouse and stylus)
72 *
73 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
74 * byte0 0 0 0 0 0 0 0 1
75 * byte1 0 0 0 0 0 BS2 BS Tip
76 * byte2 X7 X6 X5 X4 X3 X2 X1 X0
77 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
78 *
79 * (returned as Report 2 - absolute coordinates from the stylus)
80 *
81 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
82 * byte0 0 0 0 0 0 0 1 0
83 * byte1 X7 X6 X5 X4 X3 X2 X1 X0
84 * byte2 X15 X14 X13 X12 X11 X10 X9 X8
85 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
86 * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8
87 * byte5 * * * BS2 BS1 Tip IR DV
88 * byte6 P7 P6 P5 P4 P3 P2 P1 P0
89 * byte7 P15 P14 P13 P12 P11 P10 P9 P8
90 *
91 * (returned as Report 3 - absolute coordinates from the mouse)
92 *
93 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
94 * byte0 0 0 0 0 0 0 1 1
95 * byte1 X7 X6 X5 X4 X3 X2 X1 X0
96 * byte2 X15 X14 X13 X12 X11 X10 X9 X8
97 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
98 * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8
99 * byte5 * * * BS2 BS1 Tip IR DV
100 * byte6 P7 P6 P5 P4 P3 P2 P1 P0
101 * byte7 P15 P14 P13 P12 P11 P10 P9 P8
102 *
103 * (returned as Report 4 - macrokeys from the stylus)
104 *
105 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
106 * byte0 0 0 0 0 0 1 0 0
107 * byte1 0 0 0 BS2 BS Tip IR DV
108 * byte2 0 0 0 0 0 0 1 0
109 * byte3 0 0 0 K4 K3 K2 K1 K0
110 * byte4 P7 P6 P5 P4 P3 P2 P1 P0
111 * byte5 P15 P14 P13 P12 P11 P10 P9 P8
112 *
113 * (returned as Report 5 - macrokeys from the mouse)
114 *
115 * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
116 * byte0 0 0 0 0 0 1 0 1
117 * byte1 0 0 0 BS2 BS Tip IR DV
118 * byte2 0 0 0 0 0 0 1 0
119 * byte3 0 0 0 K4 K3 K2 K1 K0
120 * byte4 P7 P6 P5 P4 P3 P2 P1 P0
121 * byte5 P15 P14 P13 P12 P11 P10 P9 P8
122 *
123 * IR: In Range = Proximity on
124 * DV = Data Valid
125 * BS = Barrel Switch (as in, macro keys)
126 * BS2 also referred to as Tablet Pick
127 *
128 * Command Summary:
129 *
130 * Use report_type CONTROL (3)
131 * Use report_id 2
132 *
133 * Command/Data Description Return Bytes Return Value
134 * 0x10/0x00 SwitchToMouse 0
135 * 0x10/0x01 SwitchToTablet 0
136 * 0x18/0x04 SetResolution 0
137 * 0x12/0xFF AutoGainOn 0
138 * 0x17/0x00 FilterOn 0
139 * 0x01/0x00 GetXExtension 2 MaxX
140 * 0x01/0x01 GetYExtension 2 MaxY
141 * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE
142 * 0x03/0x00 GetODMCode 2 ODMCode
143 * 0x08/0x00 GetPressureLevels 2 =512
144 * 0x04/0x00 GetFirmwareVersion 2 Firmware Version
145 * 0x11/0x02 EnableMacroKeys 0
146 *
147 * To initialize the tablet:
148 *
149 * (1) Send Resolution500LPI (Command)
150 * (2) Query for Model code (Option Report)
151 * (3) Query for ODM code (Option Report)
152 * (4) Query for firmware (Option Report)
153 * (5) Query for GetXExtension (Option Report)
154 * (6) Query for GetYExtension (Option Report)
155 * (7) Query for GetPressureLevels (Option Report)
156 * (8) SwitchToTablet for Absolute coordinates, or
157 * SwitchToMouse for Relative coordinates (Command)
158 * (9) EnableMacroKeys (Command)
159 * (10) FilterOn (Command)
160 * (11) AutoGainOn (Command)
161 *
162 * (Step 9 can be omitted, but you'll then have no function keys.)
163 */
164
165 #define USB_VENDOR_ID_AIPTEK 0x08ca
166 #define USB_VENDOR_ID_KYE 0x0458
167 #define USB_REQ_GET_REPORT 0x01
168 #define USB_REQ_SET_REPORT 0x09
169
170 /* PointerMode codes
171 */
172 #define AIPTEK_POINTER_ONLY_MOUSE_MODE 0
173 #define AIPTEK_POINTER_ONLY_STYLUS_MODE 1
174 #define AIPTEK_POINTER_EITHER_MODE 2
175
176 #define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \
177 (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \
178 a == AIPTEK_POINTER_EITHER_MODE)
179 #define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \
180 (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \
181 a == AIPTEK_POINTER_EITHER_MODE)
182
183 /* CoordinateMode code
184 */
185 #define AIPTEK_COORDINATE_RELATIVE_MODE 0
186 #define AIPTEK_COORDINATE_ABSOLUTE_MODE 1
187
188 /* XTilt and YTilt values
189 */
190 #define AIPTEK_TILT_MIN (-128)
191 #define AIPTEK_TILT_MAX 127
192 #define AIPTEK_TILT_DISABLE (-10101)
193
194 /* Wheel values
195 */
196 #define AIPTEK_WHEEL_MIN 0
197 #define AIPTEK_WHEEL_MAX 1024
198 #define AIPTEK_WHEEL_DISABLE (-10101)
199
200 /* ToolCode values, which BTW are 0x140 .. 0x14f
201 * We have things set up such that if the tool button has changed,
202 * the tools get reset.
203 */
204 /* toolMode codes
205 */
206 #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
207 #define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL
208 #define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH
209 #define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH
210 #define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER
211 #define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE
212 #define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS
213
214 /* Diagnostic message codes
215 */
216 #define AIPTEK_DIAGNOSTIC_NA 0
217 #define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1
218 #define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2
219 #define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3
220
221 /* Time to wait (in ms) to help mask hand jittering
222 * when pressing the stylus buttons.
223 */
224 #define AIPTEK_JITTER_DELAY_DEFAULT 50
225
226 /* Time to wait (in ms) in-between sending the tablet
227 * a command and beginning the process of reading the return
228 * sequence from the tablet.
229 */
230 #define AIPTEK_PROGRAMMABLE_DELAY_25 25
231 #define AIPTEK_PROGRAMMABLE_DELAY_50 50
232 #define AIPTEK_PROGRAMMABLE_DELAY_100 100
233 #define AIPTEK_PROGRAMMABLE_DELAY_200 200
234 #define AIPTEK_PROGRAMMABLE_DELAY_300 300
235 #define AIPTEK_PROGRAMMABLE_DELAY_400 400
236 #define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400
237
238 /* Mouse button programming
239 */
240 #define AIPTEK_MOUSE_LEFT_BUTTON 0x04
241 #define AIPTEK_MOUSE_RIGHT_BUTTON 0x08
242 #define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10
243
244 /* Stylus button programming
245 */
246 #define AIPTEK_STYLUS_LOWER_BUTTON 0x08
247 #define AIPTEK_STYLUS_UPPER_BUTTON 0x10
248
249 /* Length of incoming packet from the tablet
250 */
251 #define AIPTEK_PACKET_LENGTH 8
252
253 /* We report in EV_MISC both the proximity and
254 * whether the report came from the stylus, tablet mouse
255 * or "unknown" -- Unknown when the tablet is in relative
256 * mode, because we only get report 1's.
257 */
258 #define AIPTEK_REPORT_TOOL_UNKNOWN 0x10
259 #define AIPTEK_REPORT_TOOL_STYLUS 0x20
260 #define AIPTEK_REPORT_TOOL_MOUSE 0x40
261
262 static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
263 static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
264
265 struct aiptek_features {
266 int odmCode; /* Tablet manufacturer code */
267 int modelCode; /* Tablet model code (not unique) */
268 int firmwareCode; /* prom/eeprom version */
269 char usbPath[64 + 1]; /* device's physical usb path */
270 };
271
272 struct aiptek_settings {
273 int pointerMode; /* stylus-, mouse-only or either */
274 int coordinateMode; /* absolute/relative coords */
275 int toolMode; /* pen, pencil, brush, etc. tool */
276 int xTilt; /* synthetic xTilt amount */
277 int yTilt; /* synthetic yTilt amount */
278 int wheel; /* synthetic wheel amount */
279 int stylusButtonUpper; /* stylus upper btn delivers... */
280 int stylusButtonLower; /* stylus lower btn delivers... */
281 int mouseButtonLeft; /* mouse left btn delivers... */
282 int mouseButtonMiddle; /* mouse middle btn delivers... */
283 int mouseButtonRight; /* mouse right btn delivers... */
284 int programmableDelay; /* delay for tablet programming */
285 int jitterDelay; /* delay for hand jittering */
286 };
287
288 struct aiptek {
289 struct input_dev *inputdev; /* input device struct */
290 struct usb_interface *intf; /* usb interface struct */
291 struct urb *urb; /* urb for incoming reports */
292 dma_addr_t data_dma; /* our dma stuffage */
293 struct aiptek_features features; /* tablet's array of features */
294 struct aiptek_settings curSetting; /* tablet's current programmable */
295 struct aiptek_settings newSetting; /* ... and new param settings */
296 unsigned int ifnum; /* interface number for IO */
297 int diagnostic; /* tablet diagnostic codes */
298 unsigned long eventCount; /* event count */
299 int inDelay; /* jitter: in jitter delay? */
300 unsigned long endDelay; /* jitter: time when delay ends */
301 int previousJitterable; /* jitterable prev value */
302
303 int lastMacro; /* macro key to reset */
304 int previousToolMode; /* pen, pencil, brush, etc. tool */
305 unsigned char *data; /* incoming packet data */
306 };
307
308 static const int eventTypes[] = {
309 EV_KEY, EV_ABS, EV_REL, EV_MSC,
310 };
311
312 static const int absEvents[] = {
313 ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y,
314 ABS_WHEEL, ABS_MISC,
315 };
316
317 static const int relEvents[] = {
318 REL_X, REL_Y, REL_WHEEL,
319 };
320
321 static const int buttonEvents[] = {
322 BTN_LEFT, BTN_RIGHT, BTN_MIDDLE,
323 BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
324 BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH,
325 BTN_STYLUS, BTN_STYLUS2,
326 };
327
328 /*
329 * Permit easy lookup of keyboard events to send, versus
330 * the bitmap which comes from the tablet. This hides the
331 * issue that the F_keys are not sequentially numbered.
332 */
333 static const int macroKeyEvents[] = {
334 KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
335 KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
336 KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
337 KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
338 KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
339 KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
340 };
341
342 /***********************************************************************
343 * Map values to strings and back. Every map should have the following
344 * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
345 */
346 #define AIPTEK_INVALID_VALUE -1
347
348 struct aiptek_map {
349 const char *string;
350 int value;
351 };
352
map_str_to_val(const struct aiptek_map * map,const char * str,size_t count)353 static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count)
354 {
355 const struct aiptek_map *p;
356
357 if (str[count - 1] == '\n')
358 count--;
359
360 for (p = map; p->string; p++)
361 if (!strncmp(str, p->string, count))
362 return p->value;
363
364 return AIPTEK_INVALID_VALUE;
365 }
366
map_val_to_str(const struct aiptek_map * map,int val)367 static const char *map_val_to_str(const struct aiptek_map *map, int val)
368 {
369 const struct aiptek_map *p;
370
371 for (p = map; p->value != AIPTEK_INVALID_VALUE; p++)
372 if (val == p->value)
373 return p->string;
374
375 return "unknown";
376 }
377
378 /***********************************************************************
379 * aiptek_irq can receive one of six potential reports.
380 * The documentation for each is in the body of the function.
381 *
382 * The tablet reports on several attributes per invocation of
383 * aiptek_irq. Because the Linux Input Event system allows the
384 * transmission of ONE attribute per input_report_xxx() call,
385 * collation has to be done on the other end to reconstitute
386 * a complete tablet report. Further, the number of Input Event reports
387 * submitted varies, depending on what USB report type, and circumstance.
388 * To deal with this, EV_MSC is used to indicate an 'end-of-report'
389 * message. This has been an undocumented convention understood by the kernel
390 * tablet driver and clients such as gpm and XFree86's tablet drivers.
391 *
392 * Of the information received from the tablet, the one piece I
393 * cannot transmit is the proximity bit (without resorting to an EV_MSC
394 * convention above.) I therefore have taken over REL_MISC and ABS_MISC
395 * (for relative and absolute reports, respectively) for communicating
396 * Proximity. Why two events? I thought it interesting to know if the
397 * Proximity event occurred while the tablet was in absolute or relative
398 * mode.
399 * Update: REL_MISC proved not to be such a good idea. With REL_MISC you
400 * get an event transmitted each time. ABS_MISC works better, since it
401 * can be set and re-set. Thus, only using ABS_MISC from now on.
402 *
403 * Other tablets use the notion of a certain minimum stylus pressure
404 * to infer proximity. While that could have been done, that is yet
405 * another 'by convention' behavior, the documentation for which
406 * would be spread between two (or more) pieces of software.
407 *
408 * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
409 * replaced with the input_sync() method (which emits EV_SYN.)
410 */
411
aiptek_irq(struct urb * urb)412 static void aiptek_irq(struct urb *urb)
413 {
414 struct aiptek *aiptek = urb->context;
415 unsigned char *data = aiptek->data;
416 struct input_dev *inputdev = aiptek->inputdev;
417 struct usb_interface *intf = aiptek->intf;
418 int jitterable = 0;
419 int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
420
421 switch (urb->status) {
422 case 0:
423 /* Success */
424 break;
425
426 case -ECONNRESET:
427 case -ENOENT:
428 case -ESHUTDOWN:
429 /* This urb is terminated, clean up */
430 dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
431 __func__, urb->status);
432 return;
433
434 default:
435 dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
436 __func__, urb->status);
437 goto exit;
438 }
439
440 /* See if we are in a delay loop -- throw out report if true.
441 */
442 if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
443 goto exit;
444 }
445
446 aiptek->inDelay = 0;
447 aiptek->eventCount++;
448
449 /* Report 1 delivers relative coordinates with either a stylus
450 * or the mouse. You do not know, however, which input
451 * tool generated the event.
452 */
453 if (data[0] == 1) {
454 if (aiptek->curSetting.coordinateMode ==
455 AIPTEK_COORDINATE_ABSOLUTE_MODE) {
456 aiptek->diagnostic =
457 AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
458 } else {
459 x = (signed char) data[2];
460 y = (signed char) data[3];
461
462 /* jitterable keeps track of whether any button has been pressed.
463 * We're also using it to remap the physical mouse button mask
464 * to pseudo-settings. (We don't specifically care about it's
465 * value after moving/transposing mouse button bitmasks, except
466 * that a non-zero value indicates that one or more
467 * mouse button was pressed.)
468 */
469 jitterable = data[1] & 0x07;
470
471 left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0;
472 right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0;
473 middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0;
474
475 input_report_key(inputdev, BTN_LEFT, left);
476 input_report_key(inputdev, BTN_MIDDLE, middle);
477 input_report_key(inputdev, BTN_RIGHT, right);
478
479 input_report_abs(inputdev, ABS_MISC,
480 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
481 input_report_rel(inputdev, REL_X, x);
482 input_report_rel(inputdev, REL_Y, y);
483
484 /* Wheel support is in the form of a single-event
485 * firing.
486 */
487 if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
488 input_report_rel(inputdev, REL_WHEEL,
489 aiptek->curSetting.wheel);
490 aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
491 }
492 if (aiptek->lastMacro != -1) {
493 input_report_key(inputdev,
494 macroKeyEvents[aiptek->lastMacro], 0);
495 aiptek->lastMacro = -1;
496 }
497 input_sync(inputdev);
498 }
499 }
500 /* Report 2 is delivered only by the stylus, and delivers
501 * absolute coordinates.
502 */
503 else if (data[0] == 2) {
504 if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
505 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
506 } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
507 (aiptek->curSetting.pointerMode)) {
508 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
509 } else {
510 x = get_unaligned_le16(data + 1);
511 y = get_unaligned_le16(data + 3);
512 z = get_unaligned_le16(data + 6);
513
514 dv = (data[5] & 0x01) != 0 ? 1 : 0;
515 p = (data[5] & 0x02) != 0 ? 1 : 0;
516 tip = (data[5] & 0x04) != 0 ? 1 : 0;
517
518 /* Use jitterable to re-arrange button masks
519 */
520 jitterable = data[5] & 0x18;
521
522 bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
523 pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
524
525 /* dv indicates 'data valid' (e.g., the tablet is in sync
526 * and has delivered a "correct" report) We will ignore
527 * all 'bad' reports...
528 */
529 if (dv != 0) {
530 /* If the selected tool changed, reset the old
531 * tool key, and set the new one.
532 */
533 if (aiptek->previousToolMode !=
534 aiptek->curSetting.toolMode) {
535 input_report_key(inputdev,
536 aiptek->previousToolMode, 0);
537 input_report_key(inputdev,
538 aiptek->curSetting.toolMode,
539 1);
540 aiptek->previousToolMode =
541 aiptek->curSetting.toolMode;
542 }
543
544 if (p != 0) {
545 input_report_abs(inputdev, ABS_X, x);
546 input_report_abs(inputdev, ABS_Y, y);
547 input_report_abs(inputdev, ABS_PRESSURE, z);
548
549 input_report_key(inputdev, BTN_TOUCH, tip);
550 input_report_key(inputdev, BTN_STYLUS, bs);
551 input_report_key(inputdev, BTN_STYLUS2, pck);
552
553 if (aiptek->curSetting.xTilt !=
554 AIPTEK_TILT_DISABLE) {
555 input_report_abs(inputdev,
556 ABS_TILT_X,
557 aiptek->curSetting.xTilt);
558 }
559 if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
560 input_report_abs(inputdev,
561 ABS_TILT_Y,
562 aiptek->curSetting.yTilt);
563 }
564
565 /* Wheel support is in the form of a single-event
566 * firing.
567 */
568 if (aiptek->curSetting.wheel !=
569 AIPTEK_WHEEL_DISABLE) {
570 input_report_abs(inputdev,
571 ABS_WHEEL,
572 aiptek->curSetting.wheel);
573 aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
574 }
575 }
576 input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
577 if (aiptek->lastMacro != -1) {
578 input_report_key(inputdev,
579 macroKeyEvents[aiptek->lastMacro], 0);
580 aiptek->lastMacro = -1;
581 }
582 input_sync(inputdev);
583 }
584 }
585 }
586 /* Report 3's come from the mouse in absolute mode.
587 */
588 else if (data[0] == 3) {
589 if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
590 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
591 } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE
592 (aiptek->curSetting.pointerMode)) {
593 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
594 } else {
595 x = get_unaligned_le16(data + 1);
596 y = get_unaligned_le16(data + 3);
597
598 jitterable = data[5] & 0x1c;
599
600 dv = (data[5] & 0x01) != 0 ? 1 : 0;
601 p = (data[5] & 0x02) != 0 ? 1 : 0;
602 left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
603 right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
604 middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
605
606 if (dv != 0) {
607 /* If the selected tool changed, reset the old
608 * tool key, and set the new one.
609 */
610 if (aiptek->previousToolMode !=
611 aiptek->curSetting.toolMode) {
612 input_report_key(inputdev,
613 aiptek->previousToolMode, 0);
614 input_report_key(inputdev,
615 aiptek->curSetting.toolMode,
616 1);
617 aiptek->previousToolMode =
618 aiptek->curSetting.toolMode;
619 }
620
621 if (p != 0) {
622 input_report_abs(inputdev, ABS_X, x);
623 input_report_abs(inputdev, ABS_Y, y);
624
625 input_report_key(inputdev, BTN_LEFT, left);
626 input_report_key(inputdev, BTN_MIDDLE, middle);
627 input_report_key(inputdev, BTN_RIGHT, right);
628
629 /* Wheel support is in the form of a single-event
630 * firing.
631 */
632 if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
633 input_report_abs(inputdev,
634 ABS_WHEEL,
635 aiptek->curSetting.wheel);
636 aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
637 }
638 }
639 input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
640 if (aiptek->lastMacro != -1) {
641 input_report_key(inputdev,
642 macroKeyEvents[aiptek->lastMacro], 0);
643 aiptek->lastMacro = -1;
644 }
645 input_sync(inputdev);
646 }
647 }
648 }
649 /* Report 4s come from the macro keys when pressed by stylus
650 */
651 else if (data[0] == 4) {
652 jitterable = data[1] & 0x18;
653
654 dv = (data[1] & 0x01) != 0 ? 1 : 0;
655 p = (data[1] & 0x02) != 0 ? 1 : 0;
656 tip = (data[1] & 0x04) != 0 ? 1 : 0;
657 bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
658 pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
659
660 macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1;
661 z = get_unaligned_le16(data + 4);
662
663 if (dv) {
664 /* If the selected tool changed, reset the old
665 * tool key, and set the new one.
666 */
667 if (aiptek->previousToolMode !=
668 aiptek->curSetting.toolMode) {
669 input_report_key(inputdev,
670 aiptek->previousToolMode, 0);
671 input_report_key(inputdev,
672 aiptek->curSetting.toolMode,
673 1);
674 aiptek->previousToolMode =
675 aiptek->curSetting.toolMode;
676 }
677 }
678
679 if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
680 input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
681 aiptek->lastMacro = -1;
682 }
683
684 if (macro != -1 && macro != aiptek->lastMacro) {
685 input_report_key(inputdev, macroKeyEvents[macro], 1);
686 aiptek->lastMacro = macro;
687 }
688 input_report_abs(inputdev, ABS_MISC,
689 p | AIPTEK_REPORT_TOOL_STYLUS);
690 input_sync(inputdev);
691 }
692 /* Report 5s come from the macro keys when pressed by mouse
693 */
694 else if (data[0] == 5) {
695 jitterable = data[1] & 0x1c;
696
697 dv = (data[1] & 0x01) != 0 ? 1 : 0;
698 p = (data[1] & 0x02) != 0 ? 1 : 0;
699 left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
700 right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
701 middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
702 macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0;
703
704 if (dv) {
705 /* If the selected tool changed, reset the old
706 * tool key, and set the new one.
707 */
708 if (aiptek->previousToolMode !=
709 aiptek->curSetting.toolMode) {
710 input_report_key(inputdev,
711 aiptek->previousToolMode, 0);
712 input_report_key(inputdev,
713 aiptek->curSetting.toolMode, 1);
714 aiptek->previousToolMode = aiptek->curSetting.toolMode;
715 }
716 }
717
718 if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
719 input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
720 aiptek->lastMacro = -1;
721 }
722
723 if (macro != -1 && macro != aiptek->lastMacro) {
724 input_report_key(inputdev, macroKeyEvents[macro], 1);
725 aiptek->lastMacro = macro;
726 }
727
728 input_report_abs(inputdev, ABS_MISC,
729 p | AIPTEK_REPORT_TOOL_MOUSE);
730 input_sync(inputdev);
731 }
732 /* We have no idea which tool can generate a report 6. Theoretically,
733 * neither need to, having been given reports 4 & 5 for such use.
734 * However, report 6 is the 'official-looking' report for macroKeys;
735 * reports 4 & 5 supposively are used to support unnamed, unknown
736 * hat switches (which just so happen to be the macroKeys.)
737 */
738 else if (data[0] == 6) {
739 macro = get_unaligned_le16(data + 1);
740 if (macro > 0) {
741 input_report_key(inputdev, macroKeyEvents[macro - 1],
742 0);
743 }
744 if (macro < 25) {
745 input_report_key(inputdev, macroKeyEvents[macro + 1],
746 0);
747 }
748
749 /* If the selected tool changed, reset the old
750 tool key, and set the new one.
751 */
752 if (aiptek->previousToolMode !=
753 aiptek->curSetting.toolMode) {
754 input_report_key(inputdev,
755 aiptek->previousToolMode, 0);
756 input_report_key(inputdev,
757 aiptek->curSetting.toolMode,
758 1);
759 aiptek->previousToolMode =
760 aiptek->curSetting.toolMode;
761 }
762
763 input_report_key(inputdev, macroKeyEvents[macro], 1);
764 input_report_abs(inputdev, ABS_MISC,
765 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
766 input_sync(inputdev);
767 } else {
768 dev_dbg(&intf->dev, "Unknown report %d\n", data[0]);
769 }
770
771 /* Jitter may occur when the user presses a button on the stlyus
772 * or the mouse. What we do to prevent that is wait 'x' milliseconds
773 * following a 'jitterable' event, which should give the hand some time
774 * stabilize itself.
775 *
776 * We just introduced aiptek->previousJitterable to carry forth the
777 * notion that jitter occurs when the button state changes from on to off:
778 * a person drawing, holding a button down is not subject to jittering.
779 * With that in mind, changing from upper button depressed to lower button
780 * WILL transition through a jitter delay.
781 */
782
783 if (aiptek->previousJitterable != jitterable &&
784 aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) {
785 aiptek->endDelay = jiffies +
786 ((aiptek->curSetting.jitterDelay * HZ) / 1000);
787 aiptek->inDelay = 1;
788 }
789 aiptek->previousJitterable = jitterable;
790
791 exit:
792 retval = usb_submit_urb(urb, GFP_ATOMIC);
793 if (retval != 0) {
794 dev_err(&intf->dev,
795 "%s - usb_submit_urb failed with result %d\n",
796 __func__, retval);
797 }
798 }
799
800 /***********************************************************************
801 * These are the USB id's known so far. We do not identify them to
802 * specific Aiptek model numbers, because there has been overlaps,
803 * use, and reuse of id's in existing models. Certain models have
804 * been known to use more than one ID, indicative perhaps of
805 * manufacturing revisions. In any event, we consider these
806 * IDs to not be model-specific nor unique.
807 */
808 static const struct usb_device_id aiptek_ids[] = {
809 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)},
810 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)},
811 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)},
812 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)},
813 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
814 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
815 {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
816 {USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
817 {}
818 };
819
820 MODULE_DEVICE_TABLE(usb, aiptek_ids);
821
822 /***********************************************************************
823 * Open an instance of the tablet driver.
824 */
aiptek_open(struct input_dev * inputdev)825 static int aiptek_open(struct input_dev *inputdev)
826 {
827 struct aiptek *aiptek = input_get_drvdata(inputdev);
828
829 aiptek->urb->dev = interface_to_usbdev(aiptek->intf);
830 if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
831 return -EIO;
832
833 return 0;
834 }
835
836 /***********************************************************************
837 * Close an instance of the tablet driver.
838 */
aiptek_close(struct input_dev * inputdev)839 static void aiptek_close(struct input_dev *inputdev)
840 {
841 struct aiptek *aiptek = input_get_drvdata(inputdev);
842
843 usb_kill_urb(aiptek->urb);
844 }
845
846 /***********************************************************************
847 * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
848 * where they were known as usb_set_report and usb_get_report.
849 */
850 static int
aiptek_set_report(struct aiptek * aiptek,unsigned char report_type,unsigned char report_id,void * buffer,int size)851 aiptek_set_report(struct aiptek *aiptek,
852 unsigned char report_type,
853 unsigned char report_id, void *buffer, int size)
854 {
855 struct usb_device *udev = interface_to_usbdev(aiptek->intf);
856
857 return usb_control_msg(udev,
858 usb_sndctrlpipe(udev, 0),
859 USB_REQ_SET_REPORT,
860 USB_TYPE_CLASS | USB_RECIP_INTERFACE |
861 USB_DIR_OUT, (report_type << 8) + report_id,
862 aiptek->ifnum, buffer, size, 5000);
863 }
864
865 static int
aiptek_get_report(struct aiptek * aiptek,unsigned char report_type,unsigned char report_id,void * buffer,int size)866 aiptek_get_report(struct aiptek *aiptek,
867 unsigned char report_type,
868 unsigned char report_id, void *buffer, int size)
869 {
870 struct usb_device *udev = interface_to_usbdev(aiptek->intf);
871
872 return usb_control_msg(udev,
873 usb_rcvctrlpipe(udev, 0),
874 USB_REQ_GET_REPORT,
875 USB_TYPE_CLASS | USB_RECIP_INTERFACE |
876 USB_DIR_IN, (report_type << 8) + report_id,
877 aiptek->ifnum, buffer, size, 5000);
878 }
879
880 /***********************************************************************
881 * Send a command to the tablet.
882 */
883 static int
aiptek_command(struct aiptek * aiptek,unsigned char command,unsigned char data)884 aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
885 {
886 const int sizeof_buf = 3 * sizeof(u8);
887 int ret;
888 u8 *buf;
889
890 buf = kmalloc(sizeof_buf, GFP_KERNEL);
891 if (!buf)
892 return -ENOMEM;
893
894 buf[0] = 2;
895 buf[1] = command;
896 buf[2] = data;
897
898 if ((ret =
899 aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
900 dev_dbg(&aiptek->intf->dev,
901 "aiptek_program: failed, tried to send: 0x%02x 0x%02x\n",
902 command, data);
903 }
904 kfree(buf);
905 return ret < 0 ? ret : 0;
906 }
907
908 /***********************************************************************
909 * Retrieve information from the tablet. Querying info is defined as first
910 * sending the {command,data} sequence as a command, followed by a wait
911 * (aka, "programmaticDelay") and then a "read" request.
912 */
913 static int
aiptek_query(struct aiptek * aiptek,unsigned char command,unsigned char data)914 aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
915 {
916 const int sizeof_buf = 3 * sizeof(u8);
917 int ret;
918 u8 *buf;
919
920 buf = kmalloc(sizeof_buf, GFP_KERNEL);
921 if (!buf)
922 return -ENOMEM;
923
924 buf[0] = 2;
925 buf[1] = command;
926 buf[2] = data;
927
928 if (aiptek_command(aiptek, command, data) != 0) {
929 kfree(buf);
930 return -EIO;
931 }
932 msleep(aiptek->curSetting.programmableDelay);
933
934 if (aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf) != sizeof_buf) {
935 dev_dbg(&aiptek->intf->dev,
936 "aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n",
937 buf[0], buf[1], buf[2]);
938 ret = -EIO;
939 } else {
940 ret = get_unaligned_le16(buf + 1);
941 }
942 kfree(buf);
943 return ret;
944 }
945
946 /***********************************************************************
947 * Program the tablet into either absolute or relative mode.
948 * We also get information about the tablet's size.
949 */
aiptek_program_tablet(struct aiptek * aiptek)950 static int aiptek_program_tablet(struct aiptek *aiptek)
951 {
952 int ret;
953 /* Execute Resolution500LPI */
954 if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0)
955 return ret;
956
957 /* Query getModelCode */
958 if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0)
959 return ret;
960 aiptek->features.modelCode = ret & 0xff;
961
962 /* Query getODMCode */
963 if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0)
964 return ret;
965 aiptek->features.odmCode = ret;
966
967 /* Query getFirmwareCode */
968 if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0)
969 return ret;
970 aiptek->features.firmwareCode = ret;
971
972 /* Query getXextension */
973 if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
974 return ret;
975 input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
976
977 /* Query getYextension */
978 if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
979 return ret;
980 input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
981
982 /* Query getPressureLevels */
983 if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
984 return ret;
985 input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
986
987 /* Depending on whether we are in absolute or relative mode, we will
988 * do a switchToTablet(absolute) or switchToMouse(relative) command.
989 */
990 if (aiptek->curSetting.coordinateMode ==
991 AIPTEK_COORDINATE_ABSOLUTE_MODE) {
992 /* Execute switchToTablet */
993 if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) {
994 return ret;
995 }
996 } else {
997 /* Execute switchToMouse */
998 if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) {
999 return ret;
1000 }
1001 }
1002
1003 /* Enable the macro keys */
1004 if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0)
1005 return ret;
1006 #if 0
1007 /* Execute FilterOn */
1008 if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0)
1009 return ret;
1010 #endif
1011
1012 /* Execute AutoGainOn */
1013 if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0)
1014 return ret;
1015
1016 /* Reset the eventCount, so we track events from last (re)programming
1017 */
1018 aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA;
1019 aiptek->eventCount = 0;
1020
1021 return 0;
1022 }
1023
1024 /***********************************************************************
1025 * Sysfs functions. Sysfs prefers that individually-tunable parameters
1026 * exist in their separate pseudo-files. Summary data that is immutable
1027 * may exist in a singular file so long as you don't define a writeable
1028 * interface.
1029 */
1030
1031 /***********************************************************************
1032 * support the 'size' file -- display support
1033 */
show_tabletSize(struct device * dev,struct device_attribute * attr,char * buf)1034 static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf)
1035 {
1036 struct aiptek *aiptek = dev_get_drvdata(dev);
1037
1038 return sysfs_emit(buf, "%dx%d\n",
1039 input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
1040 input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
1041 }
1042
1043 /* These structs define the sysfs files, param #1 is the name of the
1044 * file, param 2 is the file permissions, param 3 & 4 are to the
1045 * output generator and input parser routines. Absence of a routine is
1046 * permitted -- it only means can't either 'cat' the file, or send data
1047 * to it.
1048 */
1049 static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
1050
1051 /***********************************************************************
1052 * support routines for the 'pointer_mode' file. Note that this file
1053 * both displays current setting and allows reprogramming.
1054 */
1055 static struct aiptek_map pointer_mode_map[] = {
1056 { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE },
1057 { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE },
1058 { "either", AIPTEK_POINTER_EITHER_MODE },
1059 { NULL, AIPTEK_INVALID_VALUE }
1060 };
1061
show_tabletPointerMode(struct device * dev,struct device_attribute * attr,char * buf)1062 static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
1063 {
1064 struct aiptek *aiptek = dev_get_drvdata(dev);
1065
1066 return sysfs_emit(buf, "%s\n", map_val_to_str(pointer_mode_map,
1067 aiptek->curSetting.pointerMode));
1068 }
1069
1070 static ssize_t
store_tabletPointerMode(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1071 store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1072 {
1073 struct aiptek *aiptek = dev_get_drvdata(dev);
1074 int new_mode = map_str_to_val(pointer_mode_map, buf, count);
1075
1076 if (new_mode == AIPTEK_INVALID_VALUE)
1077 return -EINVAL;
1078
1079 aiptek->newSetting.pointerMode = new_mode;
1080 return count;
1081 }
1082
1083 static DEVICE_ATTR(pointer_mode,
1084 S_IRUGO | S_IWUSR,
1085 show_tabletPointerMode, store_tabletPointerMode);
1086
1087 /***********************************************************************
1088 * support routines for the 'coordinate_mode' file. Note that this file
1089 * both displays current setting and allows reprogramming.
1090 */
1091
1092 static struct aiptek_map coordinate_mode_map[] = {
1093 { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE },
1094 { "relative", AIPTEK_COORDINATE_RELATIVE_MODE },
1095 { NULL, AIPTEK_INVALID_VALUE }
1096 };
1097
show_tabletCoordinateMode(struct device * dev,struct device_attribute * attr,char * buf)1098 static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
1099 {
1100 struct aiptek *aiptek = dev_get_drvdata(dev);
1101
1102 return sysfs_emit(buf, "%s\n", map_val_to_str(coordinate_mode_map,
1103 aiptek->curSetting.coordinateMode));
1104 }
1105
1106 static ssize_t
store_tabletCoordinateMode(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1107 store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1108 {
1109 struct aiptek *aiptek = dev_get_drvdata(dev);
1110 int new_mode = map_str_to_val(coordinate_mode_map, buf, count);
1111
1112 if (new_mode == AIPTEK_INVALID_VALUE)
1113 return -EINVAL;
1114
1115 aiptek->newSetting.coordinateMode = new_mode;
1116 return count;
1117 }
1118
1119 static DEVICE_ATTR(coordinate_mode,
1120 S_IRUGO | S_IWUSR,
1121 show_tabletCoordinateMode, store_tabletCoordinateMode);
1122
1123 /***********************************************************************
1124 * support routines for the 'tool_mode' file. Note that this file
1125 * both displays current setting and allows reprogramming.
1126 */
1127
1128 static struct aiptek_map tool_mode_map[] = {
1129 { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE },
1130 { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE },
1131 { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE },
1132 { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE },
1133 { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE },
1134 { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE },
1135 { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE },
1136 { NULL, AIPTEK_INVALID_VALUE }
1137 };
1138
show_tabletToolMode(struct device * dev,struct device_attribute * attr,char * buf)1139 static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
1140 {
1141 struct aiptek *aiptek = dev_get_drvdata(dev);
1142
1143 return sysfs_emit(buf, "%s\n", map_val_to_str(tool_mode_map,
1144 aiptek->curSetting.toolMode));
1145 }
1146
1147 static ssize_t
store_tabletToolMode(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1148 store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1149 {
1150 struct aiptek *aiptek = dev_get_drvdata(dev);
1151 int new_mode = map_str_to_val(tool_mode_map, buf, count);
1152
1153 if (new_mode == AIPTEK_INVALID_VALUE)
1154 return -EINVAL;
1155
1156 aiptek->newSetting.toolMode = new_mode;
1157 return count;
1158 }
1159
1160 static DEVICE_ATTR(tool_mode,
1161 S_IRUGO | S_IWUSR,
1162 show_tabletToolMode, store_tabletToolMode);
1163
1164 /***********************************************************************
1165 * support routines for the 'xtilt' file. Note that this file
1166 * both displays current setting and allows reprogramming.
1167 */
show_tabletXtilt(struct device * dev,struct device_attribute * attr,char * buf)1168 static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf)
1169 {
1170 struct aiptek *aiptek = dev_get_drvdata(dev);
1171
1172 if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
1173 return sysfs_emit(buf, "disable\n");
1174 } else {
1175 return sysfs_emit(buf, "%d\n", aiptek->curSetting.xTilt);
1176 }
1177 }
1178
1179 static ssize_t
store_tabletXtilt(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1180 store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1181 {
1182 struct aiptek *aiptek = dev_get_drvdata(dev);
1183 int x;
1184
1185 if (kstrtoint(buf, 10, &x)) {
1186 size_t len = buf[count - 1] == '\n' ? count - 1 : count;
1187
1188 if (strncmp(buf, "disable", len))
1189 return -EINVAL;
1190
1191 aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
1192 } else {
1193 if (x < AIPTEK_TILT_MIN || x > AIPTEK_TILT_MAX)
1194 return -EINVAL;
1195
1196 aiptek->newSetting.xTilt = x;
1197 }
1198
1199 return count;
1200 }
1201
1202 static DEVICE_ATTR(xtilt,
1203 S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
1204
1205 /***********************************************************************
1206 * support routines for the 'ytilt' file. Note that this file
1207 * both displays current setting and allows reprogramming.
1208 */
show_tabletYtilt(struct device * dev,struct device_attribute * attr,char * buf)1209 static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf)
1210 {
1211 struct aiptek *aiptek = dev_get_drvdata(dev);
1212
1213 if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
1214 return sysfs_emit(buf, "disable\n");
1215 } else {
1216 return sysfs_emit(buf, "%d\n", aiptek->curSetting.yTilt);
1217 }
1218 }
1219
1220 static ssize_t
store_tabletYtilt(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1221 store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1222 {
1223 struct aiptek *aiptek = dev_get_drvdata(dev);
1224 int y;
1225
1226 if (kstrtoint(buf, 10, &y)) {
1227 size_t len = buf[count - 1] == '\n' ? count - 1 : count;
1228
1229 if (strncmp(buf, "disable", len))
1230 return -EINVAL;
1231
1232 aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
1233 } else {
1234 if (y < AIPTEK_TILT_MIN || y > AIPTEK_TILT_MAX)
1235 return -EINVAL;
1236
1237 aiptek->newSetting.yTilt = y;
1238 }
1239
1240 return count;
1241 }
1242
1243 static DEVICE_ATTR(ytilt,
1244 S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
1245
1246 /***********************************************************************
1247 * support routines for the 'jitter' file. Note that this file
1248 * both displays current setting and allows reprogramming.
1249 */
show_tabletJitterDelay(struct device * dev,struct device_attribute * attr,char * buf)1250 static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf)
1251 {
1252 struct aiptek *aiptek = dev_get_drvdata(dev);
1253
1254 return sysfs_emit(buf, "%d\n", aiptek->curSetting.jitterDelay);
1255 }
1256
1257 static ssize_t
store_tabletJitterDelay(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1258 store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1259 {
1260 struct aiptek *aiptek = dev_get_drvdata(dev);
1261 int err, j;
1262
1263 err = kstrtoint(buf, 10, &j);
1264 if (err)
1265 return err;
1266
1267 aiptek->newSetting.jitterDelay = j;
1268 return count;
1269 }
1270
1271 static DEVICE_ATTR(jitter,
1272 S_IRUGO | S_IWUSR,
1273 show_tabletJitterDelay, store_tabletJitterDelay);
1274
1275 /***********************************************************************
1276 * support routines for the 'delay' file. Note that this file
1277 * both displays current setting and allows reprogramming.
1278 */
show_tabletProgrammableDelay(struct device * dev,struct device_attribute * attr,char * buf)1279 static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf)
1280 {
1281 struct aiptek *aiptek = dev_get_drvdata(dev);
1282
1283 return sysfs_emit(buf, "%d\n", aiptek->curSetting.programmableDelay);
1284 }
1285
1286 static ssize_t
store_tabletProgrammableDelay(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1287 store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1288 {
1289 struct aiptek *aiptek = dev_get_drvdata(dev);
1290 int err, d;
1291
1292 err = kstrtoint(buf, 10, &d);
1293 if (err)
1294 return err;
1295
1296 aiptek->newSetting.programmableDelay = d;
1297 return count;
1298 }
1299
1300 static DEVICE_ATTR(delay,
1301 S_IRUGO | S_IWUSR,
1302 show_tabletProgrammableDelay, store_tabletProgrammableDelay);
1303
1304 /***********************************************************************
1305 * support routines for the 'event_count' file. Note that this file
1306 * only displays current setting.
1307 */
show_tabletEventsReceived(struct device * dev,struct device_attribute * attr,char * buf)1308 static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf)
1309 {
1310 struct aiptek *aiptek = dev_get_drvdata(dev);
1311
1312 return sysfs_emit(buf, "%ld\n", aiptek->eventCount);
1313 }
1314
1315 static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL);
1316
1317 /***********************************************************************
1318 * support routines for the 'diagnostic' file. Note that this file
1319 * only displays current setting.
1320 */
show_tabletDiagnosticMessage(struct device * dev,struct device_attribute * attr,char * buf)1321 static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf)
1322 {
1323 struct aiptek *aiptek = dev_get_drvdata(dev);
1324 char *retMsg;
1325
1326 switch (aiptek->diagnostic) {
1327 case AIPTEK_DIAGNOSTIC_NA:
1328 retMsg = "no errors\n";
1329 break;
1330
1331 case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE:
1332 retMsg = "Error: receiving relative reports\n";
1333 break;
1334
1335 case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE:
1336 retMsg = "Error: receiving absolute reports\n";
1337 break;
1338
1339 case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED:
1340 if (aiptek->curSetting.pointerMode ==
1341 AIPTEK_POINTER_ONLY_MOUSE_MODE) {
1342 retMsg = "Error: receiving stylus reports\n";
1343 } else {
1344 retMsg = "Error: receiving mouse reports\n";
1345 }
1346 break;
1347
1348 default:
1349 return 0;
1350 }
1351 return sysfs_emit(buf, retMsg);
1352 }
1353
1354 static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
1355
1356 /***********************************************************************
1357 * support routines for the 'stylus_upper' file. Note that this file
1358 * both displays current setting and allows for setting changing.
1359 */
1360
1361 static struct aiptek_map stylus_button_map[] = {
1362 { "upper", AIPTEK_STYLUS_UPPER_BUTTON },
1363 { "lower", AIPTEK_STYLUS_LOWER_BUTTON },
1364 { NULL, AIPTEK_INVALID_VALUE }
1365 };
1366
show_tabletStylusUpper(struct device * dev,struct device_attribute * attr,char * buf)1367 static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
1368 {
1369 struct aiptek *aiptek = dev_get_drvdata(dev);
1370
1371 return sysfs_emit(buf, "%s\n", map_val_to_str(stylus_button_map,
1372 aiptek->curSetting.stylusButtonUpper));
1373 }
1374
1375 static ssize_t
store_tabletStylusUpper(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1376 store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1377 {
1378 struct aiptek *aiptek = dev_get_drvdata(dev);
1379 int new_button = map_str_to_val(stylus_button_map, buf, count);
1380
1381 if (new_button == AIPTEK_INVALID_VALUE)
1382 return -EINVAL;
1383
1384 aiptek->newSetting.stylusButtonUpper = new_button;
1385 return count;
1386 }
1387
1388 static DEVICE_ATTR(stylus_upper,
1389 S_IRUGO | S_IWUSR,
1390 show_tabletStylusUpper, store_tabletStylusUpper);
1391
1392 /***********************************************************************
1393 * support routines for the 'stylus_lower' file. Note that this file
1394 * both displays current setting and allows for setting changing.
1395 */
1396
show_tabletStylusLower(struct device * dev,struct device_attribute * attr,char * buf)1397 static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
1398 {
1399 struct aiptek *aiptek = dev_get_drvdata(dev);
1400
1401 return sysfs_emit(buf, "%s\n", map_val_to_str(stylus_button_map,
1402 aiptek->curSetting.stylusButtonLower));
1403 }
1404
1405 static ssize_t
store_tabletStylusLower(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1406 store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1407 {
1408 struct aiptek *aiptek = dev_get_drvdata(dev);
1409 int new_button = map_str_to_val(stylus_button_map, buf, count);
1410
1411 if (new_button == AIPTEK_INVALID_VALUE)
1412 return -EINVAL;
1413
1414 aiptek->newSetting.stylusButtonLower = new_button;
1415 return count;
1416 }
1417
1418 static DEVICE_ATTR(stylus_lower,
1419 S_IRUGO | S_IWUSR,
1420 show_tabletStylusLower, store_tabletStylusLower);
1421
1422 /***********************************************************************
1423 * support routines for the 'mouse_left' file. Note that this file
1424 * both displays current setting and allows for setting changing.
1425 */
1426
1427 static struct aiptek_map mouse_button_map[] = {
1428 { "left", AIPTEK_MOUSE_LEFT_BUTTON },
1429 { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON },
1430 { "right", AIPTEK_MOUSE_RIGHT_BUTTON },
1431 { NULL, AIPTEK_INVALID_VALUE }
1432 };
1433
show_tabletMouseLeft(struct device * dev,struct device_attribute * attr,char * buf)1434 static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
1435 {
1436 struct aiptek *aiptek = dev_get_drvdata(dev);
1437
1438 return sysfs_emit(buf, "%s\n", map_val_to_str(mouse_button_map,
1439 aiptek->curSetting.mouseButtonLeft));
1440 }
1441
1442 static ssize_t
store_tabletMouseLeft(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1443 store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1444 {
1445 struct aiptek *aiptek = dev_get_drvdata(dev);
1446 int new_button = map_str_to_val(mouse_button_map, buf, count);
1447
1448 if (new_button == AIPTEK_INVALID_VALUE)
1449 return -EINVAL;
1450
1451 aiptek->newSetting.mouseButtonLeft = new_button;
1452 return count;
1453 }
1454
1455 static DEVICE_ATTR(mouse_left,
1456 S_IRUGO | S_IWUSR,
1457 show_tabletMouseLeft, store_tabletMouseLeft);
1458
1459 /***********************************************************************
1460 * support routines for the 'mouse_middle' file. Note that this file
1461 * both displays current setting and allows for setting changing.
1462 */
show_tabletMouseMiddle(struct device * dev,struct device_attribute * attr,char * buf)1463 static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
1464 {
1465 struct aiptek *aiptek = dev_get_drvdata(dev);
1466
1467 return sysfs_emit(buf, "%s\n", map_val_to_str(mouse_button_map,
1468 aiptek->curSetting.mouseButtonMiddle));
1469 }
1470
1471 static ssize_t
store_tabletMouseMiddle(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1472 store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1473 {
1474 struct aiptek *aiptek = dev_get_drvdata(dev);
1475 int new_button = map_str_to_val(mouse_button_map, buf, count);
1476
1477 if (new_button == AIPTEK_INVALID_VALUE)
1478 return -EINVAL;
1479
1480 aiptek->newSetting.mouseButtonMiddle = new_button;
1481 return count;
1482 }
1483
1484 static DEVICE_ATTR(mouse_middle,
1485 S_IRUGO | S_IWUSR,
1486 show_tabletMouseMiddle, store_tabletMouseMiddle);
1487
1488 /***********************************************************************
1489 * support routines for the 'mouse_right' file. Note that this file
1490 * both displays current setting and allows for setting changing.
1491 */
show_tabletMouseRight(struct device * dev,struct device_attribute * attr,char * buf)1492 static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
1493 {
1494 struct aiptek *aiptek = dev_get_drvdata(dev);
1495
1496 return sysfs_emit(buf, "%s\n", map_val_to_str(mouse_button_map,
1497 aiptek->curSetting.mouseButtonRight));
1498 }
1499
1500 static ssize_t
store_tabletMouseRight(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1501 store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1502 {
1503 struct aiptek *aiptek = dev_get_drvdata(dev);
1504 int new_button = map_str_to_val(mouse_button_map, buf, count);
1505
1506 if (new_button == AIPTEK_INVALID_VALUE)
1507 return -EINVAL;
1508
1509 aiptek->newSetting.mouseButtonRight = new_button;
1510 return count;
1511 }
1512
1513 static DEVICE_ATTR(mouse_right,
1514 S_IRUGO | S_IWUSR,
1515 show_tabletMouseRight, store_tabletMouseRight);
1516
1517 /***********************************************************************
1518 * support routines for the 'wheel' file. Note that this file
1519 * both displays current setting and allows for setting changing.
1520 */
show_tabletWheel(struct device * dev,struct device_attribute * attr,char * buf)1521 static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf)
1522 {
1523 struct aiptek *aiptek = dev_get_drvdata(dev);
1524
1525 if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
1526 return sysfs_emit(buf, "disable\n");
1527 } else {
1528 return sysfs_emit(buf, "%d\n", aiptek->curSetting.wheel);
1529 }
1530 }
1531
1532 static ssize_t
store_tabletWheel(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1533 store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1534 {
1535 struct aiptek *aiptek = dev_get_drvdata(dev);
1536 int err, w;
1537
1538 err = kstrtoint(buf, 10, &w);
1539 if (err)
1540 return err;
1541
1542 aiptek->newSetting.wheel = w;
1543 return count;
1544 }
1545
1546 static DEVICE_ATTR(wheel,
1547 S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
1548
1549 /***********************************************************************
1550 * support routines for the 'execute' file. Note that this file
1551 * both displays current setting and allows for setting changing.
1552 */
show_tabletExecute(struct device * dev,struct device_attribute * attr,char * buf)1553 static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
1554 {
1555 /* There is nothing useful to display, so a one-line manual
1556 * is in order...
1557 */
1558 return sysfs_emit(buf, "Write anything to this file to program your tablet.\n");
1559 }
1560
1561 static ssize_t
store_tabletExecute(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1562 store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
1563 {
1564 struct aiptek *aiptek = dev_get_drvdata(dev);
1565
1566 /* We do not care what you write to this file. Merely the action
1567 * of writing to this file triggers a tablet reprogramming.
1568 */
1569 memcpy(&aiptek->curSetting, &aiptek->newSetting,
1570 sizeof(struct aiptek_settings));
1571
1572 if (aiptek_program_tablet(aiptek) < 0)
1573 return -EIO;
1574
1575 return count;
1576 }
1577
1578 static DEVICE_ATTR(execute,
1579 S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
1580
1581 /***********************************************************************
1582 * support routines for the 'odm_code' file. Note that this file
1583 * only displays current setting.
1584 */
show_tabletODMCode(struct device * dev,struct device_attribute * attr,char * buf)1585 static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf)
1586 {
1587 struct aiptek *aiptek = dev_get_drvdata(dev);
1588
1589 return sysfs_emit(buf, "0x%04x\n", aiptek->features.odmCode);
1590 }
1591
1592 static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL);
1593
1594 /***********************************************************************
1595 * support routines for the 'model_code' file. Note that this file
1596 * only displays current setting.
1597 */
show_tabletModelCode(struct device * dev,struct device_attribute * attr,char * buf)1598 static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf)
1599 {
1600 struct aiptek *aiptek = dev_get_drvdata(dev);
1601
1602 return sysfs_emit(buf, "0x%04x\n", aiptek->features.modelCode);
1603 }
1604
1605 static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL);
1606
1607 /***********************************************************************
1608 * support routines for the 'firmware_code' file. Note that this file
1609 * only displays current setting.
1610 */
show_firmwareCode(struct device * dev,struct device_attribute * attr,char * buf)1611 static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf)
1612 {
1613 struct aiptek *aiptek = dev_get_drvdata(dev);
1614
1615 return sysfs_emit(buf, "%04x\n", aiptek->features.firmwareCode);
1616 }
1617
1618 static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
1619
1620 static struct attribute *aiptek_dev_attrs[] = {
1621 &dev_attr_size.attr,
1622 &dev_attr_pointer_mode.attr,
1623 &dev_attr_coordinate_mode.attr,
1624 &dev_attr_tool_mode.attr,
1625 &dev_attr_xtilt.attr,
1626 &dev_attr_ytilt.attr,
1627 &dev_attr_jitter.attr,
1628 &dev_attr_delay.attr,
1629 &dev_attr_event_count.attr,
1630 &dev_attr_diagnostic.attr,
1631 &dev_attr_odm_code.attr,
1632 &dev_attr_model_code.attr,
1633 &dev_attr_firmware_code.attr,
1634 &dev_attr_stylus_lower.attr,
1635 &dev_attr_stylus_upper.attr,
1636 &dev_attr_mouse_left.attr,
1637 &dev_attr_mouse_middle.attr,
1638 &dev_attr_mouse_right.attr,
1639 &dev_attr_wheel.attr,
1640 &dev_attr_execute.attr,
1641 NULL
1642 };
1643
1644 ATTRIBUTE_GROUPS(aiptek_dev);
1645
1646 /***********************************************************************
1647 * This routine is called when a tablet has been identified. It basically
1648 * sets up the tablet and the driver's internal structures.
1649 */
1650 static int
aiptek_probe(struct usb_interface * intf,const struct usb_device_id * id)1651 aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
1652 {
1653 struct usb_device *usbdev = interface_to_usbdev(intf);
1654 struct usb_endpoint_descriptor *endpoint;
1655 struct aiptek *aiptek;
1656 struct input_dev *inputdev;
1657 int i;
1658 int speeds[] = { 0,
1659 AIPTEK_PROGRAMMABLE_DELAY_50,
1660 AIPTEK_PROGRAMMABLE_DELAY_400,
1661 AIPTEK_PROGRAMMABLE_DELAY_25,
1662 AIPTEK_PROGRAMMABLE_DELAY_100,
1663 AIPTEK_PROGRAMMABLE_DELAY_200,
1664 AIPTEK_PROGRAMMABLE_DELAY_300
1665 };
1666 int err = -ENOMEM;
1667
1668 /* programmableDelay is where the command-line specified
1669 * delay is kept. We make it the first element of speeds[],
1670 * so therefore, your override speed is tried first, then the
1671 * remainder. Note that the default value of 400ms will be tried
1672 * if you do not specify any command line parameter.
1673 */
1674 speeds[0] = programmableDelay;
1675
1676 aiptek = kzalloc(sizeof(*aiptek), GFP_KERNEL);
1677 inputdev = input_allocate_device();
1678 if (!aiptek || !inputdev) {
1679 dev_warn(&intf->dev,
1680 "cannot allocate memory or input device\n");
1681 goto fail1;
1682 }
1683
1684 aiptek->data = usb_alloc_coherent(usbdev, AIPTEK_PACKET_LENGTH,
1685 GFP_KERNEL, &aiptek->data_dma);
1686 if (!aiptek->data) {
1687 dev_warn(&intf->dev, "cannot allocate usb buffer\n");
1688 goto fail1;
1689 }
1690
1691 aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
1692 if (!aiptek->urb) {
1693 dev_warn(&intf->dev, "cannot allocate urb\n");
1694 goto fail2;
1695 }
1696
1697 aiptek->inputdev = inputdev;
1698 aiptek->intf = intf;
1699 aiptek->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
1700 aiptek->inDelay = 0;
1701 aiptek->endDelay = 0;
1702 aiptek->previousJitterable = 0;
1703 aiptek->lastMacro = -1;
1704
1705 /* Set up the curSettings struct. Said struct contains the current
1706 * programmable parameters. The newSetting struct contains changes
1707 * the user makes to the settings via the sysfs interface. Those
1708 * changes are not "committed" to curSettings until the user
1709 * writes to the sysfs/.../execute file.
1710 */
1711 aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
1712 aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE;
1713 aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
1714 aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE;
1715 aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE;
1716 aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
1717 aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON;
1718 aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
1719 aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON;
1720 aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON;
1721 aiptek->curSetting.jitterDelay = jitterDelay;
1722 aiptek->curSetting.programmableDelay = programmableDelay;
1723
1724 /* Both structs should have equivalent settings
1725 */
1726 aiptek->newSetting = aiptek->curSetting;
1727
1728 /* Determine the usb devices' physical path.
1729 * Asketh not why we always pretend we're using "../input0",
1730 * but I suspect this will have to be refactored one
1731 * day if a single USB device can be a keyboard & a mouse
1732 * & a tablet, and the inputX number actually will tell
1733 * us something...
1734 */
1735 usb_make_path(usbdev, aiptek->features.usbPath,
1736 sizeof(aiptek->features.usbPath));
1737 strlcat(aiptek->features.usbPath, "/input0",
1738 sizeof(aiptek->features.usbPath));
1739
1740 /* Set up client data, pointers to open and close routines
1741 * for the input device.
1742 */
1743 inputdev->name = "Aiptek";
1744 inputdev->phys = aiptek->features.usbPath;
1745 usb_to_input_id(usbdev, &inputdev->id);
1746 inputdev->dev.parent = &intf->dev;
1747
1748 input_set_drvdata(inputdev, aiptek);
1749
1750 inputdev->open = aiptek_open;
1751 inputdev->close = aiptek_close;
1752
1753 /* Now program the capacities of the tablet, in terms of being
1754 * an input device.
1755 */
1756 for (i = 0; i < ARRAY_SIZE(eventTypes); ++i)
1757 __set_bit(eventTypes[i], inputdev->evbit);
1758
1759 for (i = 0; i < ARRAY_SIZE(absEvents); ++i)
1760 __set_bit(absEvents[i], inputdev->absbit);
1761
1762 for (i = 0; i < ARRAY_SIZE(relEvents); ++i)
1763 __set_bit(relEvents[i], inputdev->relbit);
1764
1765 __set_bit(MSC_SERIAL, inputdev->mscbit);
1766
1767 /* Set up key and button codes */
1768 for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i)
1769 __set_bit(buttonEvents[i], inputdev->keybit);
1770
1771 for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
1772 __set_bit(macroKeyEvents[i], inputdev->keybit);
1773
1774 /*
1775 * Program the input device coordinate capacities. We do not yet
1776 * know what maximum X, Y, and Z values are, so we're putting fake
1777 * values in. Later, we'll ask the tablet to put in the correct
1778 * values.
1779 */
1780 input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
1781 input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
1782 input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
1783 input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
1784 input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
1785 input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
1786
1787 err = usb_find_common_endpoints(intf->cur_altsetting,
1788 NULL, NULL, &endpoint, NULL);
1789 if (err) {
1790 dev_err(&intf->dev,
1791 "interface has no int in endpoints, but must have minimum 1\n");
1792 goto fail3;
1793 }
1794
1795 /* Go set up our URB, which is called when the tablet receives
1796 * input.
1797 */
1798 usb_fill_int_urb(aiptek->urb,
1799 usbdev,
1800 usb_rcvintpipe(usbdev,
1801 endpoint->bEndpointAddress),
1802 aiptek->data, 8, aiptek_irq, aiptek,
1803 endpoint->bInterval);
1804
1805 aiptek->urb->transfer_dma = aiptek->data_dma;
1806 aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
1807
1808 /* Program the tablet. This sets the tablet up in the mode
1809 * specified in newSetting, and also queries the tablet's
1810 * physical capacities.
1811 *
1812 * Sanity check: if a tablet doesn't like the slow programmatic
1813 * delay, we often get sizes of 0x0. Let's use that as an indicator
1814 * to try faster delays, up to 25 ms. If that logic fails, well, you'll
1815 * have to explain to us how your tablet thinks it's 0x0, and yet that's
1816 * not an error :-)
1817 */
1818
1819 for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
1820 aiptek->curSetting.programmableDelay = speeds[i];
1821 (void)aiptek_program_tablet(aiptek);
1822 if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
1823 dev_info(&intf->dev,
1824 "Aiptek using %d ms programming speed\n",
1825 aiptek->curSetting.programmableDelay);
1826 break;
1827 }
1828 }
1829
1830 /* Murphy says that some day someone will have a tablet that fails the
1831 above test. That's you, Frederic Rodrigo */
1832 if (i == ARRAY_SIZE(speeds)) {
1833 dev_info(&intf->dev,
1834 "Aiptek tried all speeds, no sane response\n");
1835 err = -EINVAL;
1836 goto fail3;
1837 }
1838
1839 /* Associate this driver's struct with the usb interface.
1840 */
1841 usb_set_intfdata(intf, aiptek);
1842
1843 /* Register the tablet as an Input Device
1844 */
1845 err = input_register_device(aiptek->inputdev);
1846 if (err) {
1847 dev_warn(&intf->dev,
1848 "input_register_device returned err: %d\n", err);
1849 goto fail3;
1850 }
1851 return 0;
1852
1853 fail3: usb_free_urb(aiptek->urb);
1854 fail2: usb_free_coherent(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
1855 aiptek->data_dma);
1856 fail1: usb_set_intfdata(intf, NULL);
1857 input_free_device(inputdev);
1858 kfree(aiptek);
1859 return err;
1860 }
1861
1862 /***********************************************************************
1863 * Deal with tablet disconnecting from the system.
1864 */
aiptek_disconnect(struct usb_interface * intf)1865 static void aiptek_disconnect(struct usb_interface *intf)
1866 {
1867 struct aiptek *aiptek = usb_get_intfdata(intf);
1868
1869 /* Disassociate driver's struct with usb interface
1870 */
1871 usb_set_intfdata(intf, NULL);
1872 if (aiptek != NULL) {
1873 /* Free & unhook everything from the system.
1874 */
1875 usb_kill_urb(aiptek->urb);
1876 input_unregister_device(aiptek->inputdev);
1877 usb_free_urb(aiptek->urb);
1878 usb_free_coherent(interface_to_usbdev(intf),
1879 AIPTEK_PACKET_LENGTH,
1880 aiptek->data, aiptek->data_dma);
1881 kfree(aiptek);
1882 }
1883 }
1884
1885 static struct usb_driver aiptek_driver = {
1886 .name = "aiptek",
1887 .probe = aiptek_probe,
1888 .disconnect = aiptek_disconnect,
1889 .id_table = aiptek_ids,
1890 .dev_groups = aiptek_dev_groups,
1891 };
1892
1893 module_usb_driver(aiptek_driver);
1894
1895 MODULE_AUTHOR("Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen");
1896 MODULE_DESCRIPTION("Aiptek HyperPen USB Tablet Driver");
1897 MODULE_LICENSE("GPL");
1898
1899 module_param(programmableDelay, int, 0);
1900 MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming");
1901 module_param(jitterDelay, int, 0);
1902 MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay");
1903