xref: /linux/drivers/ata/pata_ali.c (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)
1 /*
2  * pata_ali.c 	- ALI 15x3 PATA for new ATA layer
3  *			  (C) 2005 Red Hat Inc
4  *
5  * based in part upon
6  * linux/drivers/ide/pci/alim15x3.c		Version 0.17	2003/01/02
7  *
8  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
9  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
10  *  Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
11  *
12  *  Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
13  *  May be copied or modified under the terms of the GNU General Public License
14  *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
15  *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
16  *
17  *  Documentation
18  *	Chipset documentation available under NDA only
19  *
20  *  TODO/CHECK
21  *	Cannot have ATAPI on both master & slave for rev < c2 (???) but
22  *	otherwise should do atapi DMA (For now for old we do PIO only for
23  *	ATAPI)
24  *	Review Sunblade workaround.
25  */
26 
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/pci.h>
30 #include <linux/init.h>
31 #include <linux/blkdev.h>
32 #include <linux/delay.h>
33 #include <scsi/scsi_host.h>
34 #include <linux/libata.h>
35 #include <linux/dmi.h>
36 
37 #define DRV_NAME "pata_ali"
38 #define DRV_VERSION "0.7.8"
39 
40 static int ali_atapi_dma;
41 module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
42 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
43 
44 static struct pci_dev *ali_isa_bridge;
45 
46 /*
47  *	Cable special cases
48  */
49 
50 static const struct dmi_system_id cable_dmi_table[] = {
51 	{
52 		.ident = "HP Pavilion N5430",
53 		.matches = {
54 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
55 			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
56 		},
57 	},
58 	{
59 		.ident = "Toshiba Satellite S1800-814",
60 		.matches = {
61 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
62 			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
63 		},
64 	},
65 	{ }
66 };
67 
ali_cable_override(struct pci_dev * pdev)68 static int ali_cable_override(struct pci_dev *pdev)
69 {
70 	/* Fujitsu P2000 */
71 	if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
72 	   	return 1;
73 	/* Mitac 8317 (Winbook-A) and relatives */
74 	if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317)
75 		return 1;
76 	/* Systems by DMI */
77 	if (dmi_check_system(cable_dmi_table))
78 		return 1;
79 	return 0;
80 }
81 
82 /**
83  *	ali_c2_cable_detect	-	cable detection
84  *	@ap: ATA port
85  *
86  *	Perform cable detection for C2 and later revisions
87  */
88 
ali_c2_cable_detect(struct ata_port * ap)89 static int ali_c2_cable_detect(struct ata_port *ap)
90 {
91 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
92 	u8 ata66;
93 
94 	/* Certain laptops use short but suitable cables and don't
95 	   implement the detect logic */
96 
97 	if (ali_cable_override(pdev))
98 		return ATA_CBL_PATA40_SHORT;
99 
100 	/* Host view cable detect 0x4A bit 0 primary bit 1 secondary
101 	   Bit set for 40 pin */
102 	pci_read_config_byte(pdev, 0x4A, &ata66);
103 	if (ata66 & (1 << ap->port_no))
104 		return ATA_CBL_PATA40;
105 	else
106 		return ATA_CBL_PATA80;
107 }
108 
109 /**
110  *	ali_20_filter		-	filter for earlier ALI DMA
111  *	@adev: ATA device
112  *	@mask: received mask to manipulate and pass back
113  *
114  *	Ensure that we do not do DMA on CD devices. We may be able to
115  *	fix that later on. Also ensure we do not do UDMA on WDC drives
116  */
117 
ali_20_filter(struct ata_device * adev,unsigned int mask)118 static unsigned int ali_20_filter(struct ata_device *adev, unsigned int mask)
119 {
120 	char model_num[ATA_ID_PROD_LEN + 1];
121 	/* No DMA on anything but a disk for now */
122 	if (adev->class != ATA_DEV_ATA)
123 		mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
124 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
125 	if (strstr(model_num, "WDC"))
126 		mask &= ~ATA_MASK_UDMA;
127 	return mask;
128 }
129 
130 /**
131  *	ali_fifo_control	-	FIFO manager
132  *	@ap: ALi channel to control
133  *	@adev: device for FIFO control
134  *	@on: 0 for off 1 for on
135  *
136  *	Enable or disable the FIFO on a given device. Because of the way the
137  *	ALi FIFO works it provides a boost on ATA disk but can be confused by
138  *	ATAPI and we must therefore manage it.
139  */
140 
ali_fifo_control(struct ata_port * ap,struct ata_device * adev,int on)141 static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on)
142 {
143 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
144 	int pio_fifo = 0x54 + ap->port_no;
145 	u8 fifo;
146 	int shift = 4 * adev->devno;
147 
148 	/* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to
149 	   0x00. Not all the docs agree but the behaviour we now use is the
150 	   one stated in the BIOS Programming Guide */
151 
152 	pci_read_config_byte(pdev, pio_fifo, &fifo);
153 	fifo &= ~(0x0F << shift);
154 	fifo |= (on << shift);
155 	pci_write_config_byte(pdev, pio_fifo, fifo);
156 }
157 
158 /**
159  *	ali_program_modes	-	load mode registers
160  *	@ap: ALi channel to load
161  *	@adev: Device the timing is for
162  *	@t: timing data
163  *	@ultra: UDMA timing or zero for off
164  *
165  *	Loads the timing registers for cmd/data and disable UDMA if
166  *	ultra is zero. If ultra is set then load and enable the UDMA
167  *	timing but do not touch the command/data timing.
168  */
169 
ali_program_modes(struct ata_port * ap,struct ata_device * adev,struct ata_timing * t,u8 ultra)170 static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra)
171 {
172 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
173 	int cas = 0x58 + 4 * ap->port_no;	/* Command timing */
174 	int cbt = 0x59 + 4 * ap->port_no;	/* Command timing */
175 	int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */
176 	int udmat = 0x56 + ap->port_no;	/* UDMA timing */
177 	int shift = 4 * adev->devno;
178 	u8 udma;
179 
180 	if (t != NULL) {
181 		t->setup = clamp_val(t->setup, 1, 8) & 7;
182 		t->act8b = clamp_val(t->act8b, 1, 8) & 7;
183 		t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
184 		t->active = clamp_val(t->active, 1, 8) & 7;
185 		t->recover = clamp_val(t->recover, 1, 16) & 15;
186 
187 		pci_write_config_byte(pdev, cas, t->setup);
188 		pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
189 		pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover);
190 	}
191 
192 	/* Set up the UDMA enable */
193 	pci_read_config_byte(pdev, udmat, &udma);
194 	udma &= ~(0x0F << shift);
195 	udma |= ultra << shift;
196 	pci_write_config_byte(pdev, udmat, udma);
197 }
198 
199 /**
200  *	ali_set_piomode	-	set initial PIO mode data
201  *	@ap: ATA interface
202  *	@adev: ATA device
203  *
204  *	Program the ALi registers for PIO mode.
205  */
206 
ali_set_piomode(struct ata_port * ap,struct ata_device * adev)207 static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev)
208 {
209 	struct ata_device *pair = ata_dev_pair(adev);
210 	struct ata_timing t;
211 	unsigned long T =  1000000000 / 33333;	/* PCI clock based */
212 
213 	ata_timing_compute(adev, adev->pio_mode, &t, T, 1);
214 	if (pair) {
215 		struct ata_timing p;
216 		ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
217 		ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
218 		if (ata_dma_enabled(pair)) {
219 			ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
220 			ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
221 		}
222 	}
223 
224 	/* PIO FIFO is only permitted on ATA disk */
225 	if (adev->class != ATA_DEV_ATA)
226 		ali_fifo_control(ap, adev, 0x00);
227 	ali_program_modes(ap, adev, &t, 0);
228 	if (adev->class == ATA_DEV_ATA)
229 		ali_fifo_control(ap, adev, 0x05);
230 
231 }
232 
233 /**
234  *	ali_set_dmamode	-	set initial DMA mode data
235  *	@ap: ATA interface
236  *	@adev: ATA device
237  *
238  *	Program the ALi registers for DMA mode.
239  */
240 
ali_set_dmamode(struct ata_port * ap,struct ata_device * adev)241 static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
242 {
243 	static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
244 	struct ata_device *pair = ata_dev_pair(adev);
245 	struct ata_timing t;
246 	unsigned long T =  1000000000 / 33333;	/* PCI clock based */
247 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
248 
249 
250 	if (adev->class == ATA_DEV_ATA)
251 		ali_fifo_control(ap, adev, 0x08);
252 
253 	if (adev->dma_mode >= XFER_UDMA_0) {
254 		ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]);
255 		if (adev->dma_mode >= XFER_UDMA_3) {
256 			u8 reg4b;
257 			pci_read_config_byte(pdev, 0x4B, &reg4b);
258 			reg4b |= 1;
259 			pci_write_config_byte(pdev, 0x4B, reg4b);
260 		}
261 	} else {
262 		ata_timing_compute(adev, adev->dma_mode, &t, T, 1);
263 		if (pair) {
264 			struct ata_timing p;
265 			ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
266 			ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
267 			if (ata_dma_enabled(pair)) {
268 				ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
269 				ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
270 			}
271 		}
272 		ali_program_modes(ap, adev, &t, 0);
273 	}
274 }
275 
276 /**
277  *	ali_warn_atapi_dma	-	Warn about ATAPI DMA disablement
278  *	@adev: Device
279  *
280  *	Whine about ATAPI DMA disablement if @adev is an ATAPI device.
281  *	Can be used as ->dev_config.
282  */
283 
ali_warn_atapi_dma(struct ata_device * adev)284 static void ali_warn_atapi_dma(struct ata_device *adev)
285 {
286 	struct ata_eh_context *ehc = &adev->link->eh_context;
287 	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
288 
289 	if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
290 		ata_dev_warn(adev,
291 			     "WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled\n");
292 		ata_dev_warn(adev,
293 			     "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
294 	}
295 }
296 
297 /**
298  *	ali_lock_sectors	-	Keep older devices to 255 sector mode
299  *	@adev: Device
300  *
301  *	Called during the bus probe for each device that is found. We use
302  *	this call to lock the sector count of the device to 255 or less on
303  *	older ALi controllers. If we didn't do this then large I/O's would
304  *	require LBA48 commands which the older ALi requires are issued by
305  *	slower PIO methods
306  */
307 
ali_lock_sectors(struct ata_device * adev)308 static void ali_lock_sectors(struct ata_device *adev)
309 {
310 	adev->max_sectors = 255;
311 	ali_warn_atapi_dma(adev);
312 }
313 
314 /**
315  *	ali_check_atapi_dma	-	DMA check for most ALi controllers
316  *	@qc: Command to complete
317  *
318  *	Called to decide whether commands should be sent by DMA or PIO
319  */
320 
ali_check_atapi_dma(struct ata_queued_cmd * qc)321 static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
322 {
323 	if (!ali_atapi_dma) {
324 		/* FIXME: pata_ali can't do ATAPI DMA reliably but the
325 		 * IDE alim15x3 driver can.  I tried lots of things
326 		 * but couldn't find what the actual difference was.
327 		 * If you got an idea, please write it to
328 		 * linux-ide@vger.kernel.org and cc htejun@gmail.com.
329 		 *
330 		 * Disable ATAPI DMA for now.
331 		 */
332 		return -EOPNOTSUPP;
333 	}
334 
335 	/* If its not a media command, its not worth it */
336 	if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC)
337 		return -EOPNOTSUPP;
338 	return 0;
339 }
340 
ali_c2_c3_postreset(struct ata_link * link,unsigned int * classes)341 static void ali_c2_c3_postreset(struct ata_link *link, unsigned int *classes)
342 {
343 	u8 r;
344 	int port_bit = 4 << link->ap->port_no;
345 
346 	/* If our bridge is an ALI 1533 then do the extra work */
347 	if (ali_isa_bridge) {
348 		/* Tristate and re-enable the bus signals */
349 		pci_read_config_byte(ali_isa_bridge, 0x58, &r);
350 		r &= ~port_bit;
351 		pci_write_config_byte(ali_isa_bridge, 0x58, r);
352 		r |= port_bit;
353 		pci_write_config_byte(ali_isa_bridge, 0x58, r);
354 	}
355 	ata_sff_postreset(link, classes);
356 }
357 
358 static const struct scsi_host_template ali_sht = {
359 	ATA_BMDMA_SHT(DRV_NAME),
360 };
361 
362 /*
363  *	Port operations for PIO only ALi
364  */
365 
366 static struct ata_port_operations ali_early_port_ops = {
367 	.inherits	= &ata_sff_port_ops,
368 	.cable_detect	= ata_cable_40wire,
369 	.set_piomode	= ali_set_piomode,
370 	.sff_data_xfer  = ata_sff_data_xfer32,
371 };
372 
373 static const struct ata_port_operations ali_dma_base_ops = {
374 	.inherits	= &ata_bmdma32_port_ops,
375 	.set_piomode	= ali_set_piomode,
376 	.set_dmamode	= ali_set_dmamode,
377 };
378 
379 /*
380  *	Port operations for DMA capable ALi without cable
381  *	detect
382  */
383 static struct ata_port_operations ali_20_port_ops = {
384 	.inherits	= &ali_dma_base_ops,
385 	.cable_detect	= ata_cable_40wire,
386 	.mode_filter	= ali_20_filter,
387 	.check_atapi_dma = ali_check_atapi_dma,
388 	.dev_config	= ali_lock_sectors,
389 };
390 
391 /*
392  *	Port operations for DMA capable ALi with cable detect
393  */
394 static struct ata_port_operations ali_c2_port_ops = {
395 	.inherits	= &ali_dma_base_ops,
396 	.check_atapi_dma = ali_check_atapi_dma,
397 	.cable_detect	= ali_c2_cable_detect,
398 	.dev_config	= ali_lock_sectors,
399 	.postreset	= ali_c2_c3_postreset,
400 };
401 
402 /*
403  *	Port operations for DMA capable ALi with cable detect
404  */
405 static struct ata_port_operations ali_c4_port_ops = {
406 	.inherits	= &ali_dma_base_ops,
407 	.check_atapi_dma = ali_check_atapi_dma,
408 	.cable_detect	= ali_c2_cable_detect,
409 	.dev_config	= ali_lock_sectors,
410 };
411 
412 /*
413  *	Port operations for DMA capable ALi with cable detect and LBA48
414  */
415 static struct ata_port_operations ali_c5_port_ops = {
416 	.inherits	= &ali_dma_base_ops,
417 	.check_atapi_dma = ali_check_atapi_dma,
418 	.dev_config	= ali_warn_atapi_dma,
419 	.cable_detect	= ali_c2_cable_detect,
420 };
421 
422 
423 /**
424  *	ali_init_chipset	-	chip setup function
425  *	@pdev: PCI device of ATA controller
426  *
427  *	Perform the setup on the device that must be done both at boot
428  *	and at resume time.
429  */
430 
ali_init_chipset(struct pci_dev * pdev)431 static void ali_init_chipset(struct pci_dev *pdev)
432 {
433 	u8 tmp;
434 	struct pci_dev *north;
435 
436 	/*
437 	 * The chipset revision selects the driver operations and
438 	 * mode data.
439 	 */
440 
441 	if (pdev->revision <= 0x20) {
442 		pci_read_config_byte(pdev, 0x53, &tmp);
443 		tmp |= 0x03;
444 		pci_write_config_byte(pdev, 0x53, tmp);
445 	} else {
446 		pci_read_config_byte(pdev, 0x4a, &tmp);
447 		pci_write_config_byte(pdev, 0x4a, tmp | 0x20);
448 		pci_read_config_byte(pdev, 0x4B, &tmp);
449 		if (pdev->revision < 0xC2)
450 			/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
451 			/* Clear CD-ROM DMA write bit */
452 			tmp &= 0x7F;
453 		/* Cable and UDMA */
454 		if (pdev->revision >= 0xc2)
455 			tmp |= 0x01;
456 		pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
457 		/*
458 		 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
459 		 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
460 		 * via 0x54/55.
461 		 */
462 		pci_read_config_byte(pdev, 0x53, &tmp);
463 		if (pdev->revision >= 0xc7)
464 			tmp |= 0x03;
465 		else
466 			tmp |= 0x01;	/* CD_ROM enable for DMA */
467 		pci_write_config_byte(pdev, 0x53, tmp);
468 	}
469 	north = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0,
470 					    PCI_DEVFN(0, 0));
471 	if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
472 		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
473 		   Set the south bridge enable bit */
474 		pci_read_config_byte(ali_isa_bridge, 0x79, &tmp);
475 		if (pdev->revision == 0xC2)
476 			pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04);
477 		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
478 			pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02);
479 	}
480 	pci_dev_put(north);
481 	ata_pci_bmdma_clear_simplex(pdev);
482 }
483 /**
484  *	ali_init_one		-	discovery callback
485  *	@pdev: PCI device ID
486  *	@id: PCI table info
487  *
488  *	An ALi IDE interface has been discovered. Figure out what revision
489  *	and perform configuration work before handing it to the ATA layer
490  */
491 
ali_init_one(struct pci_dev * pdev,const struct pci_device_id * id)492 static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
493 {
494 	static const struct ata_port_info info_early = {
495 		.flags = ATA_FLAG_SLAVE_POSS,
496 		.pio_mask = ATA_PIO4,
497 		.port_ops = &ali_early_port_ops
498 	};
499 	/* Revision 0x20 added DMA */
500 	static const struct ata_port_info info_20 = {
501 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
502 							ATA_FLAG_IGN_SIMPLEX,
503 		.pio_mask = ATA_PIO4,
504 		.mwdma_mask = ATA_MWDMA2,
505 		.port_ops = &ali_20_port_ops
506 	};
507 	/* Revision 0x20 with support logic added UDMA */
508 	static const struct ata_port_info info_20_udma = {
509 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
510 							ATA_FLAG_IGN_SIMPLEX,
511 		.pio_mask = ATA_PIO4,
512 		.mwdma_mask = ATA_MWDMA2,
513 		.udma_mask = ATA_UDMA2,
514 		.port_ops = &ali_20_port_ops
515 	};
516 	/* Revision 0xC2 adds UDMA66 */
517 	static const struct ata_port_info info_c2 = {
518 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
519 							ATA_FLAG_IGN_SIMPLEX,
520 		.pio_mask = ATA_PIO4,
521 		.mwdma_mask = ATA_MWDMA2,
522 		.udma_mask = ATA_UDMA4,
523 		.port_ops = &ali_c2_port_ops
524 	};
525 	/* Revision 0xC3 is UDMA66 for now */
526 	static const struct ata_port_info info_c3 = {
527 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
528 							ATA_FLAG_IGN_SIMPLEX,
529 		.pio_mask = ATA_PIO4,
530 		.mwdma_mask = ATA_MWDMA2,
531 		.udma_mask = ATA_UDMA4,
532 		.port_ops = &ali_c2_port_ops
533 	};
534 	/* Revision 0xC4 is UDMA100 */
535 	static const struct ata_port_info info_c4 = {
536 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
537 							ATA_FLAG_IGN_SIMPLEX,
538 		.pio_mask = ATA_PIO4,
539 		.mwdma_mask = ATA_MWDMA2,
540 		.udma_mask = ATA_UDMA5,
541 		.port_ops = &ali_c4_port_ops
542 	};
543 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
544 	static const struct ata_port_info info_c5 = {
545 		.flags = ATA_FLAG_SLAVE_POSS | 	ATA_FLAG_IGN_SIMPLEX,
546 		.pio_mask = ATA_PIO4,
547 		.mwdma_mask = ATA_MWDMA2,
548 		.udma_mask = ATA_UDMA6,
549 		.port_ops = &ali_c5_port_ops
550 	};
551 
552 	const struct ata_port_info *ppi[] = { NULL, NULL };
553 	u8 tmp;
554 	int rc;
555 
556 	rc = pcim_enable_device(pdev);
557 	if (rc)
558 		return rc;
559 
560 	/*
561 	 * The chipset revision selects the driver operations and
562 	 * mode data.
563 	 */
564 
565 	if (pdev->revision < 0x20) {
566 		ppi[0] = &info_early;
567 	} else if (pdev->revision < 0xC2) {
568         	ppi[0] = &info_20;
569 	} else if (pdev->revision == 0xC2) {
570         	ppi[0] = &info_c2;
571 	} else if (pdev->revision == 0xC3) {
572         	ppi[0] = &info_c3;
573 	} else if (pdev->revision == 0xC4) {
574         	ppi[0] = &info_c4;
575 	} else
576         	ppi[0] = &info_c5;
577 
578 	ali_init_chipset(pdev);
579 
580 	if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
581 		/* Are we paired with a UDMA capable chip */
582 		pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp);
583 		if ((tmp & 0x1E) == 0x12)
584 	        	ppi[0] = &info_20_udma;
585 	}
586 
587 	if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask)
588 		return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
589 	else
590 		return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0);
591 }
592 
593 #ifdef CONFIG_PM_SLEEP
ali_reinit_one(struct pci_dev * pdev)594 static int ali_reinit_one(struct pci_dev *pdev)
595 {
596 	struct ata_host *host = pci_get_drvdata(pdev);
597 	int rc;
598 
599 	rc = ata_pci_device_do_resume(pdev);
600 	if (rc)
601 		return rc;
602 	ali_init_chipset(pdev);
603 	ata_host_resume(host);
604 	return 0;
605 }
606 #endif
607 
608 static const struct pci_device_id ali[] = {
609 	{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
610 	{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), },
611 
612 	{ },
613 };
614 
615 static struct pci_driver ali_pci_driver = {
616 	.name 		= DRV_NAME,
617 	.id_table	= ali,
618 	.probe 		= ali_init_one,
619 	.remove		= ata_pci_remove_one,
620 #ifdef CONFIG_PM_SLEEP
621 	.suspend	= ata_pci_device_suspend,
622 	.resume		= ali_reinit_one,
623 #endif
624 };
625 
ali_init(void)626 static int __init ali_init(void)
627 {
628 	int ret;
629 	ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
630 
631 	ret = pci_register_driver(&ali_pci_driver);
632 	if (ret < 0)
633 		pci_dev_put(ali_isa_bridge);
634 	return ret;
635 }
636 
637 
ali_exit(void)638 static void __exit ali_exit(void)
639 {
640 	pci_unregister_driver(&ali_pci_driver);
641 	pci_dev_put(ali_isa_bridge);
642 }
643 
644 
645 MODULE_AUTHOR("Alan Cox");
646 MODULE_DESCRIPTION("low-level driver for ALi PATA");
647 MODULE_LICENSE("GPL");
648 MODULE_DEVICE_TABLE(pci, ali);
649 MODULE_VERSION(DRV_VERSION);
650 
651 module_init(ali_init);
652 module_exit(ali_exit);
653