1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * pcic.c: MicroSPARC-IIep PCI controller support
4 *
5 * Copyright (C) 1998 V. Roganov and G. Raiko
6 *
7 * Code is derived from Ultra/PCI PSYCHO controller support, see that
8 * for author info.
9 *
10 * Support for diverse IIep based platforms by Pete Zaitcev.
11 * CP-1200 by Eric Brower.
12 */
13
14 #include <linux/kernel.h>
15 #include <linux/types.h>
16 #include <linux/init.h>
17 #include <linux/mm.h>
18 #include <linux/slab.h>
19 #include <linux/string.h>
20 #include <linux/jiffies.h>
21
22 #include <asm/swift.h> /* for cache flushing. */
23 #include <asm/io.h>
24
25 #include <linux/ctype.h>
26 #include <linux/pci.h>
27 #include <linux/time.h>
28 #include <linux/timex.h>
29 #include <linux/interrupt.h>
30 #include <linux/export.h>
31
32 #include <asm/irq.h>
33 #include <asm/oplib.h>
34 #include <asm/prom.h>
35 #include <asm/pcic.h>
36 #include <asm/timex.h>
37 #include <asm/timer.h>
38 #include <linux/uaccess.h>
39 #include <asm/irq_regs.h>
40
41 #include "kernel.h"
42 #include "irq.h"
43
44 /*
45 * I studied different documents and many live PROMs both from 2.30
46 * family and 3.xx versions. I came to the amazing conclusion: there is
47 * absolutely no way to route interrupts in IIep systems relying on
48 * information which PROM presents. We must hardcode interrupt routing
49 * schematics. And this actually sucks. -- zaitcev 1999/05/12
50 *
51 * To find irq for a device we determine which routing map
52 * is in effect or, in other words, on which machine we are running.
53 * We use PROM name for this although other techniques may be used
54 * in special cases (Gleb reports a PROMless IIep based system).
55 * Once we know the map we take device configuration address and
56 * find PCIC pin number where INT line goes. Then we may either program
57 * preferred irq into the PCIC or supply the preexisting irq to the device.
58 */
59 struct pcic_ca2irq {
60 unsigned char busno; /* PCI bus number */
61 unsigned char devfn; /* Configuration address */
62 unsigned char pin; /* PCIC external interrupt pin */
63 unsigned char irq; /* Preferred IRQ (mappable in PCIC) */
64 unsigned int force; /* Enforce preferred IRQ */
65 };
66
67 struct pcic_sn2list {
68 char *sysname;
69 struct pcic_ca2irq *intmap;
70 int mapdim;
71 };
72
73 /*
74 * JavaEngine-1 apparently has different versions.
75 *
76 * According to communications with Sun folks, for P2 build 501-4628-03:
77 * pin 0 - parallel, audio;
78 * pin 1 - Ethernet;
79 * pin 2 - su;
80 * pin 3 - PS/2 kbd and mouse.
81 *
82 * OEM manual (805-1486):
83 * pin 0: Ethernet
84 * pin 1: All EBus
85 * pin 2: IGA (unused)
86 * pin 3: Not connected
87 * OEM manual says that 501-4628 & 501-4811 are the same thing,
88 * only the latter has NAND flash in place.
89 *
90 * So far unofficial Sun wins over the OEM manual. Poor OEMs...
91 */
92 static struct pcic_ca2irq pcic_i_je1a[] = { /* 501-4811-03 */
93 { 0, 0x00, 2, 12, 0 }, /* EBus: hogs all */
94 { 0, 0x01, 1, 6, 1 }, /* Happy Meal */
95 { 0, 0x80, 0, 7, 0 }, /* IGA (unused) */
96 };
97
98 /* XXX JS-E entry is incomplete - PCI Slot 2 address (pin 7)? */
99 static struct pcic_ca2irq pcic_i_jse[] = {
100 { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
101 { 0, 0x01, 1, 6, 0 }, /* hme */
102 { 0, 0x08, 2, 9, 0 }, /* VGA - we hope not used :) */
103 { 0, 0x10, 6, 8, 0 }, /* PCI INTA# in Slot 1 */
104 { 0, 0x18, 7, 12, 0 }, /* PCI INTA# in Slot 2, shared w. RTC */
105 { 0, 0x38, 4, 9, 0 }, /* All ISA devices. Read 8259. */
106 { 0, 0x80, 5, 11, 0 }, /* EIDE */
107 /* {0,0x88, 0,0,0} - unknown device... PMU? Probably no interrupt. */
108 { 0, 0xA0, 4, 9, 0 }, /* USB */
109 /*
110 * Some pins belong to non-PCI devices, we hardcode them in drivers.
111 * sun4m timers - irq 10, 14
112 * PC style RTC - pin 7, irq 4 ?
113 * Smart card, Parallel - pin 4 shared with USB, ISA
114 * audio - pin 3, irq 5 ?
115 */
116 };
117
118 /* SPARCengine-6 was the original release name of CP1200.
119 * The documentation differs between the two versions
120 */
121 static struct pcic_ca2irq pcic_i_se6[] = {
122 { 0, 0x08, 0, 2, 0 }, /* SCSI */
123 { 0, 0x01, 1, 6, 0 }, /* HME */
124 { 0, 0x00, 3, 13, 0 }, /* EBus */
125 };
126
127 /*
128 * Krups (courtesy of Varol Kaptan)
129 * No documentation available, but it was easy to guess
130 * because it was very similar to Espresso.
131 *
132 * pin 0 - kbd, mouse, serial;
133 * pin 1 - Ethernet;
134 * pin 2 - igs (we do not use it);
135 * pin 3 - audio;
136 * pin 4,5,6 - unused;
137 * pin 7 - RTC (from P2 onwards as David B. says).
138 */
139 static struct pcic_ca2irq pcic_i_jk[] = {
140 { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
141 { 0, 0x01, 1, 6, 0 }, /* hme */
142 };
143
144 /*
145 * Several entries in this list may point to the same routing map
146 * as several PROMs may be installed on the same physical board.
147 */
148 #define SN2L_INIT(name, map) \
149 { name, map, ARRAY_SIZE(map) }
150
151 static struct pcic_sn2list pcic_known_sysnames[] = {
152 SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */
153 SN2L_INIT("SUNW,JS-E", pcic_i_jse), /* PROLL JavaStation-E */
154 SN2L_INIT("SUNW,SPARCengine-6", pcic_i_se6), /* SPARCengine-6/CP-1200 */
155 SN2L_INIT("SUNW,JS-NC", pcic_i_jk), /* PROLL JavaStation-NC */
156 SN2L_INIT("SUNW,JSIIep", pcic_i_jk), /* OBP JavaStation-NC */
157 { NULL, NULL, 0 }
158 };
159
160 /*
161 * Only one PCIC per IIep,
162 * and since we have no SMP IIep, only one per system.
163 */
164 static int pcic0_up;
165 static struct linux_pcic pcic0;
166
167 void __iomem *pcic_regs;
168 static volatile int pcic_speculative;
169 static volatile int pcic_trapped;
170
171 /* forward */
172 unsigned int pcic_build_device_irq(struct platform_device *op,
173 unsigned int real_irq);
174
175 #define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
176
pcic_read_config_dword(unsigned int busno,unsigned int devfn,int where,u32 * value)177 static int pcic_read_config_dword(unsigned int busno, unsigned int devfn,
178 int where, u32 *value)
179 {
180 struct linux_pcic *pcic;
181 unsigned long flags;
182
183 pcic = &pcic0;
184
185 local_irq_save(flags);
186 #if 0 /* does not fail here */
187 pcic_speculative = 1;
188 pcic_trapped = 0;
189 #endif
190 writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
191 #if 0 /* does not fail here */
192 nop();
193 if (pcic_trapped) {
194 local_irq_restore(flags);
195 *value = ~0;
196 return 0;
197 }
198 #endif
199 pcic_speculative = 2;
200 pcic_trapped = 0;
201 *value = readl(pcic->pcic_config_space_data + (where&4));
202 nop();
203 if (pcic_trapped) {
204 pcic_speculative = 0;
205 local_irq_restore(flags);
206 *value = ~0;
207 return 0;
208 }
209 pcic_speculative = 0;
210 local_irq_restore(flags);
211 return 0;
212 }
213
pcic_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * val)214 static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
215 int where, int size, u32 *val)
216 {
217 unsigned int v;
218
219 if (bus->number != 0) return -EINVAL;
220 switch (size) {
221 case 1:
222 pcic_read_config_dword(bus->number, devfn, where&~3, &v);
223 *val = 0xff & (v >> (8*(where & 3)));
224 return 0;
225 case 2:
226 if (where&1) return -EINVAL;
227 pcic_read_config_dword(bus->number, devfn, where&~3, &v);
228 *val = 0xffff & (v >> (8*(where & 3)));
229 return 0;
230 case 4:
231 if (where&3) return -EINVAL;
232 pcic_read_config_dword(bus->number, devfn, where&~3, val);
233 return 0;
234 }
235 return -EINVAL;
236 }
237
pcic_write_config_dword(unsigned int busno,unsigned int devfn,int where,u32 value)238 static int pcic_write_config_dword(unsigned int busno, unsigned int devfn,
239 int where, u32 value)
240 {
241 struct linux_pcic *pcic;
242 unsigned long flags;
243
244 pcic = &pcic0;
245
246 local_irq_save(flags);
247 writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
248 writel(value, pcic->pcic_config_space_data + (where&4));
249 local_irq_restore(flags);
250 return 0;
251 }
252
pcic_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 val)253 static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
254 int where, int size, u32 val)
255 {
256 unsigned int v;
257
258 if (bus->number != 0) return -EINVAL;
259 switch (size) {
260 case 1:
261 pcic_read_config_dword(bus->number, devfn, where&~3, &v);
262 v = (v & ~(0xff << (8*(where&3)))) |
263 ((0xff&val) << (8*(where&3)));
264 return pcic_write_config_dword(bus->number, devfn, where&~3, v);
265 case 2:
266 if (where&1) return -EINVAL;
267 pcic_read_config_dword(bus->number, devfn, where&~3, &v);
268 v = (v & ~(0xffff << (8*(where&3)))) |
269 ((0xffff&val) << (8*(where&3)));
270 return pcic_write_config_dword(bus->number, devfn, where&~3, v);
271 case 4:
272 if (where&3) return -EINVAL;
273 return pcic_write_config_dword(bus->number, devfn, where, val);
274 }
275 return -EINVAL;
276 }
277
278 static struct pci_ops pcic_ops = {
279 .read = pcic_read_config,
280 .write = pcic_write_config,
281 };
282
283 /*
284 * On sparc64 pcibios_init() calls pci_controller_probe().
285 * We want PCIC probed little ahead so that interrupt controller
286 * would be operational.
287 */
pcic_probe(void)288 int __init pcic_probe(void)
289 {
290 struct linux_pcic *pcic;
291 struct linux_prom_registers regs[PROMREG_MAX];
292 struct linux_pbm_info* pbm;
293 char namebuf[64];
294 phandle node;
295 int err;
296
297 if (pcic0_up) {
298 prom_printf("PCIC: called twice!\n");
299 prom_halt();
300 }
301 pcic = &pcic0;
302
303 node = prom_getchild (prom_root_node);
304 node = prom_searchsiblings (node, "pci");
305 if (node == 0)
306 return -ENODEV;
307 /*
308 * Map in PCIC register set, config space, and IO base
309 */
310 err = prom_getproperty(node, "reg", (char*)regs, sizeof(regs));
311 if (err == 0 || err == -1) {
312 prom_printf("PCIC: Error, cannot get PCIC registers "
313 "from PROM.\n");
314 prom_halt();
315 }
316
317 pcic0_up = 1;
318
319 pcic->pcic_res_regs.name = "pcic_registers";
320 pcic->pcic_regs = ioremap(regs[0].phys_addr, regs[0].reg_size);
321 if (!pcic->pcic_regs) {
322 prom_printf("PCIC: Error, cannot map PCIC registers.\n");
323 prom_halt();
324 }
325
326 pcic->pcic_res_io.name = "pcic_io";
327 if ((pcic->pcic_io = (unsigned long)
328 ioremap(regs[1].phys_addr, 0x10000)) == 0) {
329 prom_printf("PCIC: Error, cannot map PCIC IO Base.\n");
330 prom_halt();
331 }
332
333 pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
334 if ((pcic->pcic_config_space_addr =
335 ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == NULL) {
336 prom_printf("PCIC: Error, cannot map "
337 "PCI Configuration Space Address.\n");
338 prom_halt();
339 }
340
341 /*
342 * Docs say three least significant bits in address and data
343 * must be the same. Thus, we need adjust size of data.
344 */
345 pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
346 if ((pcic->pcic_config_space_data =
347 ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == NULL) {
348 prom_printf("PCIC: Error, cannot map "
349 "PCI Configuration Space Data.\n");
350 prom_halt();
351 }
352
353 pbm = &pcic->pbm;
354 pbm->prom_node = node;
355 prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
356 strscpy(pbm->prom_name, namebuf);
357
358 {
359 extern int pcic_nmi_trap_patch[4];
360
361 t_nmi[0] = pcic_nmi_trap_patch[0];
362 t_nmi[1] = pcic_nmi_trap_patch[1];
363 t_nmi[2] = pcic_nmi_trap_patch[2];
364 t_nmi[3] = pcic_nmi_trap_patch[3];
365 swift_flush_dcache();
366 pcic_regs = pcic->pcic_regs;
367 }
368
369 prom_getstring(prom_root_node, "name", namebuf, 63); namebuf[63] = 0;
370 {
371 struct pcic_sn2list *p;
372
373 for (p = pcic_known_sysnames; p->sysname != NULL; p++) {
374 if (strcmp(namebuf, p->sysname) == 0)
375 break;
376 }
377 pcic->pcic_imap = p->intmap;
378 pcic->pcic_imdim = p->mapdim;
379 }
380 if (pcic->pcic_imap == NULL) {
381 /*
382 * We do not panic here for the sake of embedded systems.
383 */
384 printk("PCIC: System %s is unknown, cannot route interrupts\n",
385 namebuf);
386 }
387
388 return 0;
389 }
390
pcic_pbm_scan_bus(struct linux_pcic * pcic)391 static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic)
392 {
393 struct linux_pbm_info *pbm = &pcic->pbm;
394
395 pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, &pcic_ops, pbm);
396 if (!pbm->pci_bus)
397 return;
398
399 #if 0 /* deadwood transplanted from sparc64 */
400 pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
401 pci_record_assignments(pbm, pbm->pci_bus);
402 pci_assign_unassigned(pbm, pbm->pci_bus);
403 pci_fixup_irq(pbm, pbm->pci_bus);
404 #endif
405 pci_bus_add_devices(pbm->pci_bus);
406 }
407
408 /*
409 * Main entry point from the PCI subsystem.
410 */
pcic_init(void)411 static int __init pcic_init(void)
412 {
413 struct linux_pcic *pcic;
414
415 /*
416 * PCIC should be initialized at start of the timer.
417 * So, here we report the presence of PCIC and do some magic passes.
418 */
419 if(!pcic0_up)
420 return 0;
421 pcic = &pcic0;
422
423 /*
424 * Switch off IOTLB translation.
425 */
426 writeb(PCI_DVMA_CONTROL_IOTLB_DISABLE,
427 pcic->pcic_regs+PCI_DVMA_CONTROL);
428
429 /*
430 * Increase mapped size for PCI memory space (DMA access).
431 * Should be done in that order (size first, address second).
432 * Why we couldn't set up 4GB and forget about it? XXX
433 */
434 writel(0xF0000000UL, pcic->pcic_regs+PCI_SIZE_0);
435 writel(0+PCI_BASE_ADDRESS_SPACE_MEMORY,
436 pcic->pcic_regs+PCI_BASE_ADDRESS_0);
437
438 pcic_pbm_scan_bus(pcic);
439
440 return 0;
441 }
442
pcic_present(void)443 int pcic_present(void)
444 {
445 return pcic0_up;
446 }
447
pdev_to_pnode(struct linux_pbm_info * pbm,struct pci_dev * pdev)448 static int pdev_to_pnode(struct linux_pbm_info *pbm, struct pci_dev *pdev)
449 {
450 struct linux_prom_pci_registers regs[PROMREG_MAX];
451 int err;
452 phandle node = prom_getchild(pbm->prom_node);
453
454 while(node) {
455 err = prom_getproperty(node, "reg",
456 (char *)®s[0], sizeof(regs));
457 if(err != 0 && err != -1) {
458 unsigned long devfn = (regs[0].which_io >> 8) & 0xff;
459 if(devfn == pdev->devfn)
460 return node;
461 }
462 node = prom_getsibling(node);
463 }
464 return 0;
465 }
466
pci_devcookie_alloc(void)467 static inline struct pcidev_cookie *pci_devcookie_alloc(void)
468 {
469 return kmalloc(sizeof(struct pcidev_cookie), GFP_ATOMIC);
470 }
471
pcic_map_pci_device(struct linux_pcic * pcic,struct pci_dev * dev,int node)472 static void pcic_map_pci_device(struct linux_pcic *pcic,
473 struct pci_dev *dev, int node)
474 {
475 char namebuf[64];
476 unsigned long address;
477 unsigned long flags;
478 int j;
479
480 if (node == 0 || node == -1) {
481 strscpy(namebuf, "???");
482 } else {
483 prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
484 }
485
486 for (j = 0; j < 6; j++) {
487 address = dev->resource[j].start;
488 if (address == 0) break; /* are sequential */
489 flags = dev->resource[j].flags;
490 if ((flags & IORESOURCE_IO) != 0) {
491 if (address < 0x10000) {
492 /*
493 * A device responds to I/O cycles on PCI.
494 * We generate these cycles with memory
495 * access into the fixed map (phys 0x30000000).
496 *
497 * Since a device driver does not want to
498 * do ioremap() before accessing PC-style I/O,
499 * we supply virtual, ready to access address.
500 *
501 * Note that request_region()
502 * works for these devices.
503 *
504 * XXX Neat trick, but it's a *bad* idea
505 * to shit into regions like that.
506 * What if we want to allocate one more
507 * PCI base address...
508 */
509 dev->resource[j].start =
510 pcic->pcic_io + address;
511 dev->resource[j].end = 1; /* XXX */
512 dev->resource[j].flags =
513 (flags & ~IORESOURCE_IO) | IORESOURCE_MEM;
514 } else {
515 /*
516 * OOPS... PCI Spec allows this. Sun does
517 * not have any devices getting above 64K
518 * so it must be user with a weird I/O
519 * board in a PCI slot. We must remap it
520 * under 64K but it is not done yet. XXX
521 */
522 pci_info(dev, "PCIC: Skipping I/O space at "
523 "0x%lx, this will Oops if a driver "
524 "attaches device '%s'\n", address,
525 namebuf);
526 }
527 }
528 }
529 }
530
531 static void
pcic_fill_irq(struct linux_pcic * pcic,struct pci_dev * dev,int node)532 pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
533 {
534 struct pcic_ca2irq *p;
535 unsigned int real_irq;
536 int i, ivec;
537 char namebuf[64];
538
539 if (node == 0 || node == -1) {
540 strscpy(namebuf, "???");
541 } else {
542 prom_getstring(node, "name", namebuf, sizeof(namebuf));
543 }
544
545 if ((p = pcic->pcic_imap) == NULL) {
546 dev->irq = 0;
547 return;
548 }
549 for (i = 0; i < pcic->pcic_imdim; i++) {
550 if (p->busno == dev->bus->number && p->devfn == dev->devfn)
551 break;
552 p++;
553 }
554 if (i >= pcic->pcic_imdim) {
555 pci_info(dev, "PCIC: device %s not found in %d\n", namebuf,
556 pcic->pcic_imdim);
557 dev->irq = 0;
558 return;
559 }
560
561 i = p->pin;
562 if (i >= 0 && i < 4) {
563 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
564 real_irq = ivec >> (i << 2) & 0xF;
565 } else if (i >= 4 && i < 8) {
566 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
567 real_irq = ivec >> ((i-4) << 2) & 0xF;
568 } else { /* Corrupted map */
569 pci_info(dev, "PCIC: BAD PIN %d\n", i); for (;;) {}
570 }
571 /* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */
572
573 /* real_irq means PROM did not bother to program the upper
574 * half of PCIC. This happens on JS-E with PROM 3.11, for instance.
575 */
576 if (real_irq == 0 || p->force) {
577 if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */
578 pci_info(dev, "PCIC: BAD IRQ %d\n", p->irq); for (;;) {}
579 }
580 pci_info(dev, "PCIC: setting irq %d at pin %d\n", p->irq,
581 p->pin);
582 real_irq = p->irq;
583
584 i = p->pin;
585 if (i >= 4) {
586 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
587 ivec &= ~(0xF << ((i - 4) << 2));
588 ivec |= p->irq << ((i - 4) << 2);
589 writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_HI);
590 } else {
591 ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
592 ivec &= ~(0xF << (i << 2));
593 ivec |= p->irq << (i << 2);
594 writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO);
595 }
596 }
597 dev->irq = pcic_build_device_irq(NULL, real_irq);
598 }
599
600 /*
601 * Normally called from {do_}pci_scan_bus...
602 */
pcibios_fixup_bus(struct pci_bus * bus)603 void pcibios_fixup_bus(struct pci_bus *bus)
604 {
605 struct pci_dev *dev;
606 struct linux_pcic *pcic;
607 /* struct linux_pbm_info* pbm = &pcic->pbm; */
608 int node;
609 struct pcidev_cookie *pcp;
610
611 if (!pcic0_up) {
612 pci_info(bus, "pcibios_fixup_bus: no PCIC\n");
613 return;
614 }
615 pcic = &pcic0;
616
617 /*
618 * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus);
619 */
620 if (bus->number != 0) {
621 pci_info(bus, "pcibios_fixup_bus: nonzero bus 0x%x\n",
622 bus->number);
623 return;
624 }
625
626 list_for_each_entry(dev, &bus->devices, bus_list) {
627 node = pdev_to_pnode(&pcic->pbm, dev);
628 if(node == 0)
629 node = -1;
630
631 /* cookies */
632 pcp = pci_devcookie_alloc();
633 pcp->pbm = &pcic->pbm;
634 pcp->prom_node = of_find_node_by_phandle(node);
635 dev->sysdata = pcp;
636
637 /* fixing I/O to look like memory */
638 if ((dev->class>>16) != PCI_BASE_CLASS_BRIDGE)
639 pcic_map_pci_device(pcic, dev, node);
640
641 pcic_fill_irq(pcic, dev, node);
642 }
643 }
644
645 /* Makes compiler happy */
646 static volatile int pcic_timer_dummy;
647
pcic_clear_clock_irq(void)648 static void pcic_clear_clock_irq(void)
649 {
650 pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT);
651 }
652
653 /* CPU frequency is 100 MHz, timer increments every 4 CPU clocks */
654 #define USECS_PER_JIFFY (1000000 / HZ)
655 #define TICK_TIMER_LIMIT ((100 * 1000000 / 4) / HZ)
656
pcic_cycles_offset(void)657 static unsigned int pcic_cycles_offset(void)
658 {
659 u32 value, count;
660
661 value = readl(pcic0.pcic_regs + PCI_SYS_COUNTER);
662 count = value & ~PCI_SYS_COUNTER_OVERFLOW;
663
664 if (value & PCI_SYS_COUNTER_OVERFLOW)
665 count += TICK_TIMER_LIMIT;
666 /*
667 * We divide all by HZ
668 * to have microsecond resolution and to avoid overflow
669 */
670 count = ((count / HZ) * USECS_PER_JIFFY) / (TICK_TIMER_LIMIT / HZ);
671
672 /* Coordinate with the sparc_config.clock_rate setting */
673 return count * 2;
674 }
675
pci_time_init(void)676 void __init pci_time_init(void)
677 {
678 struct linux_pcic *pcic = &pcic0;
679 unsigned long v;
680 int timer_irq, irq;
681 int err;
682
683 #ifndef CONFIG_SMP
684 /*
685 * The clock_rate is in SBUS dimension.
686 * We take into account this in pcic_cycles_offset()
687 */
688 sparc_config.clock_rate = SBUS_CLOCK_RATE / HZ;
689 sparc_config.features |= FEAT_L10_CLOCKEVENT;
690 #endif
691 sparc_config.features |= FEAT_L10_CLOCKSOURCE;
692 sparc_config.get_cycles_offset = pcic_cycles_offset;
693
694 writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
695 /* PROM should set appropriate irq */
696 v = readb(pcic->pcic_regs+PCI_COUNTER_IRQ);
697 timer_irq = PCI_COUNTER_IRQ_SYS(v);
698 writel (PCI_COUNTER_IRQ_SET(timer_irq, 0),
699 pcic->pcic_regs+PCI_COUNTER_IRQ);
700 irq = pcic_build_device_irq(NULL, timer_irq);
701 err = request_irq(irq, timer_interrupt,
702 IRQF_TIMER, "timer", NULL);
703 if (err) {
704 prom_printf("time_init: unable to attach IRQ%d\n", timer_irq);
705 prom_halt();
706 }
707 local_irq_enable();
708 }
709
710
711 #if 0
712 static void watchdog_reset() {
713 writeb(0, pcic->pcic_regs+PCI_SYS_STATUS);
714 }
715 #endif
716
717 /*
718 * NMI
719 */
pcic_nmi(unsigned int pend,struct pt_regs * regs)720 void pcic_nmi(unsigned int pend, struct pt_regs *regs)
721 {
722 pend = swab32(pend);
723
724 if (!pcic_speculative || (pend & PCI_SYS_INT_PENDING_PIO) == 0) {
725 /*
726 * XXX On CP-1200 PCI #SERR may happen, we do not know
727 * what to do about it yet.
728 */
729 printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n",
730 pend, (int)regs->pc, pcic_speculative);
731 for (;;) { }
732 }
733 pcic_speculative = 0;
734 pcic_trapped = 1;
735 regs->pc = regs->npc;
736 regs->npc += 4;
737 }
738
get_irqmask(int irq_nr)739 static inline unsigned long get_irqmask(int irq_nr)
740 {
741 return 1 << irq_nr;
742 }
743
pcic_mask_irq(struct irq_data * data)744 static void pcic_mask_irq(struct irq_data *data)
745 {
746 unsigned long mask, flags;
747
748 mask = (unsigned long)data->chip_data;
749 local_irq_save(flags);
750 writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
751 local_irq_restore(flags);
752 }
753
pcic_unmask_irq(struct irq_data * data)754 static void pcic_unmask_irq(struct irq_data *data)
755 {
756 unsigned long mask, flags;
757
758 mask = (unsigned long)data->chip_data;
759 local_irq_save(flags);
760 writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
761 local_irq_restore(flags);
762 }
763
pcic_startup_irq(struct irq_data * data)764 static unsigned int pcic_startup_irq(struct irq_data *data)
765 {
766 irq_link(data->irq);
767 pcic_unmask_irq(data);
768 return 0;
769 }
770
771 static struct irq_chip pcic_irq = {
772 .name = "pcic",
773 .irq_startup = pcic_startup_irq,
774 .irq_mask = pcic_mask_irq,
775 .irq_unmask = pcic_unmask_irq,
776 };
777
pcic_build_device_irq(struct platform_device * op,unsigned int real_irq)778 unsigned int pcic_build_device_irq(struct platform_device *op,
779 unsigned int real_irq)
780 {
781 unsigned int irq;
782 unsigned long mask;
783
784 irq = 0;
785 mask = get_irqmask(real_irq);
786 if (mask == 0)
787 goto out;
788
789 irq = irq_alloc(real_irq, real_irq);
790 if (irq == 0)
791 goto out;
792
793 irq_set_chip_and_handler_name(irq, &pcic_irq,
794 handle_level_irq, "PCIC");
795 irq_set_chip_data(irq, (void *)mask);
796
797 out:
798 return irq;
799 }
800
801
pcic_load_profile_irq(int cpu,unsigned int limit)802 static void pcic_load_profile_irq(int cpu, unsigned int limit)
803 {
804 printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
805 }
806
sun4m_pci_init_IRQ(void)807 void __init sun4m_pci_init_IRQ(void)
808 {
809 sparc_config.build_device_irq = pcic_build_device_irq;
810 sparc_config.clear_clock_irq = pcic_clear_clock_irq;
811 sparc_config.load_profile_irq = pcic_load_profile_irq;
812 }
813
814 subsys_initcall(pcic_init);
815