xref: /linux/arch/powerpc/platforms/pasemi/setup.c (revision 06d07429858317ded2db7986113a9e0129cd599b)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2006-2007 PA Semi, Inc
4  *
5  * Authors: Kip Walker, PA Semi
6  *	    Olof Johansson, PA Semi
7  *
8  * Maintained by: Olof Johansson <olof@lixom.net>
9  *
10  * Based on arch/powerpc/platforms/maple/setup.c
11  */
12 
13 #include <linux/errno.h>
14 #include <linux/kernel.h>
15 #include <linux/delay.h>
16 #include <linux/console.h>
17 #include <linux/export.h>
18 #include <linux/pci.h>
19 #include <linux/of.h>
20 #include <linux/of_platform.h>
21 #include <linux/platform_device.h>
22 #include <linux/gfp.h>
23 #include <linux/irqdomain.h>
24 
25 #include <asm/iommu.h>
26 #include <asm/machdep.h>
27 #include <asm/i8259.h>
28 #include <asm/mpic.h>
29 #include <asm/smp.h>
30 #include <asm/time.h>
31 #include <asm/mmu.h>
32 #include <asm/debug.h>
33 
34 #include <pcmcia/ss.h>
35 #include <pcmcia/cistpl.h>
36 #include <pcmcia/ds.h>
37 
38 #include "pasemi.h"
39 
40 /* SDC reset register, must be pre-mapped at reset time */
41 static void __iomem *reset_reg;
42 
43 /* Various error status registers, must be pre-mapped at MCE time */
44 
45 #define MAX_MCE_REGS	32
46 struct mce_regs {
47 	char *name;
48 	void __iomem *addr;
49 };
50 
51 static struct mce_regs mce_regs[MAX_MCE_REGS];
52 static int num_mce_regs;
53 static int nmi_virq = 0;
54 
55 
pas_restart(char * cmd)56 static void __noreturn pas_restart(char *cmd)
57 {
58 	/* Need to put others cpu in hold loop so they're not sleeping */
59 	smp_send_stop();
60 	udelay(10000);
61 	printk("Restarting...\n");
62 	while (1)
63 		out_le32(reset_reg, 0x6000000);
64 }
65 
66 #ifdef CONFIG_PPC_PASEMI_NEMO
pas_shutdown(void)67 static void pas_shutdown(void)
68 {
69 	/* Set the PLD bit that makes the SB600 think the power button is being pressed */
70 	void __iomem *pld_map = ioremap(0xf5000000,4096);
71 	while (1)
72 		out_8(pld_map+7,0x01);
73 }
74 
75 /* RTC platform device structure as is not in device tree */
76 static struct resource rtc_resource[] = {{
77 	.name = "rtc",
78 	.start = 0x70,
79 	.end = 0x71,
80 	.flags = IORESOURCE_IO,
81 }, {
82 	.name = "rtc",
83 	.start = 8,
84 	.end = 8,
85 	.flags = IORESOURCE_IRQ,
86 }};
87 
nemo_init_rtc(void)88 static inline void nemo_init_rtc(void)
89 {
90 	platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2);
91 }
92 
93 #else
94 
nemo_init_rtc(void)95 static inline void nemo_init_rtc(void)
96 {
97 }
98 #endif
99 
100 #ifdef CONFIG_SMP
101 static arch_spinlock_t timebase_lock;
102 static unsigned long timebase;
103 
pas_give_timebase(void)104 static void pas_give_timebase(void)
105 {
106 	unsigned long flags;
107 
108 	local_irq_save(flags);
109 	hard_irq_disable();
110 	arch_spin_lock(&timebase_lock);
111 	mtspr(SPRN_TBCTL, TBCTL_FREEZE);
112 	isync();
113 	timebase = get_tb();
114 	arch_spin_unlock(&timebase_lock);
115 
116 	while (timebase)
117 		barrier();
118 	mtspr(SPRN_TBCTL, TBCTL_RESTART);
119 	local_irq_restore(flags);
120 }
121 
pas_take_timebase(void)122 static void pas_take_timebase(void)
123 {
124 	while (!timebase)
125 		smp_rmb();
126 
127 	arch_spin_lock(&timebase_lock);
128 	set_tb(timebase >> 32, timebase & 0xffffffff);
129 	timebase = 0;
130 	arch_spin_unlock(&timebase_lock);
131 }
132 
133 static struct smp_ops_t pas_smp_ops = {
134 	.probe		= smp_mpic_probe,
135 	.message_pass	= smp_mpic_message_pass,
136 	.kick_cpu	= smp_generic_kick_cpu,
137 	.setup_cpu	= smp_mpic_setup_cpu,
138 	.give_timebase	= pas_give_timebase,
139 	.take_timebase	= pas_take_timebase,
140 };
141 #endif /* CONFIG_SMP */
142 
pas_setup_arch(void)143 static void __init pas_setup_arch(void)
144 {
145 #ifdef CONFIG_SMP
146 	/* Setup SMP callback */
147 	smp_ops = &pas_smp_ops;
148 #endif
149 
150 	/* Remap SDC register for doing reset */
151 	/* XXXOJN This should maybe come out of the device tree */
152 	reset_reg = ioremap(0xfc101100, 4);
153 }
154 
pas_setup_mce_regs(void)155 static int __init pas_setup_mce_regs(void)
156 {
157 	struct pci_dev *dev;
158 	int reg;
159 
160 	/* Remap various SoC status registers for use by the MCE handler */
161 
162 	reg = 0;
163 
164 	dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL);
165 	while (dev && reg < MAX_MCE_REGS) {
166 		mce_regs[reg].name = kasprintf(GFP_KERNEL,
167 						"mc%d_mcdebug_errsta", reg);
168 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730);
169 		dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev);
170 		reg++;
171 	}
172 
173 	dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
174 	if (dev && reg+4 < MAX_MCE_REGS) {
175 		mce_regs[reg].name = "iobdbg_IntStatus1";
176 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438);
177 		reg++;
178 		mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg";
179 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454);
180 		reg++;
181 		mce_regs[reg].name = "iobiom_IntStatus";
182 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10);
183 		reg++;
184 		mce_regs[reg].name = "iobiom_IntDbgReg";
185 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c);
186 		reg++;
187 	}
188 
189 	dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL);
190 	if (dev && reg+2 < MAX_MCE_REGS) {
191 		mce_regs[reg].name = "l2csts_IntStatus";
192 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200);
193 		reg++;
194 		mce_regs[reg].name = "l2csts_Cnt";
195 		mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214);
196 		reg++;
197 	}
198 
199 	num_mce_regs = reg;
200 
201 	return 0;
202 }
203 machine_device_initcall(pasemi, pas_setup_mce_regs);
204 
205 #ifdef CONFIG_PPC_PASEMI_NEMO
sb600_8259_cascade(struct irq_desc * desc)206 static void sb600_8259_cascade(struct irq_desc *desc)
207 {
208 	struct irq_chip *chip = irq_desc_get_chip(desc);
209 	unsigned int cascade_irq = i8259_irq();
210 
211 	if (cascade_irq)
212 		generic_handle_irq(cascade_irq);
213 
214 	chip->irq_eoi(&desc->irq_data);
215 }
216 
nemo_init_IRQ(struct mpic * mpic)217 static void __init nemo_init_IRQ(struct mpic *mpic)
218 {
219 	struct device_node *np;
220 	int gpio_virq;
221 	/* Connect the SB600's legacy i8259 controller */
222 	np = of_find_node_by_path("/pxp@0,e0000000");
223 	i8259_init(np, 0);
224 	of_node_put(np);
225 
226 	gpio_virq = irq_create_mapping(NULL, 3);
227 	irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH);
228 	irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
229 	mpic_unmask_irq(irq_get_irq_data(gpio_virq));
230 
231 	irq_set_default_host(mpic->irqhost);
232 }
233 
234 #else
235 
nemo_init_IRQ(struct mpic * mpic)236 static inline void nemo_init_IRQ(struct mpic *mpic)
237 {
238 }
239 #endif
240 
pas_init_IRQ(void)241 static __init void pas_init_IRQ(void)
242 {
243 	struct device_node *np;
244 	struct device_node *root, *mpic_node;
245 	unsigned long openpic_addr;
246 	const unsigned int *opprop;
247 	int naddr, opplen;
248 	int mpic_flags;
249 	const unsigned int *nmiprop;
250 	struct mpic *mpic;
251 
252 	mpic_node = NULL;
253 
254 	for_each_node_by_type(np, "interrupt-controller")
255 		if (of_device_is_compatible(np, "open-pic")) {
256 			mpic_node = np;
257 			break;
258 		}
259 	if (!mpic_node)
260 		for_each_node_by_type(np, "open-pic") {
261 			mpic_node = np;
262 			break;
263 		}
264 	if (!mpic_node) {
265 		pr_err("Failed to locate the MPIC interrupt controller\n");
266 		return;
267 	}
268 
269 	/* Find address list in /platform-open-pic */
270 	root = of_find_node_by_path("/");
271 	naddr = of_n_addr_cells(root);
272 	opprop = of_get_property(root, "platform-open-pic", &opplen);
273 	if (!opprop) {
274 		pr_err("No platform-open-pic property.\n");
275 		of_node_put(root);
276 		return;
277 	}
278 	openpic_addr = of_read_number(opprop, naddr);
279 	pr_debug("OpenPIC addr: %lx\n", openpic_addr);
280 
281 	mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET;
282 
283 	nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
284 	if (nmiprop)
285 		mpic_flags |= MPIC_ENABLE_MCK;
286 
287 	mpic = mpic_alloc(mpic_node, openpic_addr,
288 			  mpic_flags, 0, 0, "PASEMI-OPIC");
289 	BUG_ON(!mpic);
290 
291 	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
292 	mpic_init(mpic);
293 	/* The NMI/MCK source needs to be prio 15 */
294 	if (nmiprop) {
295 		nmi_virq = irq_create_mapping(NULL, *nmiprop);
296 		mpic_irq_set_priority(nmi_virq, 15);
297 		irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING);
298 		mpic_unmask_irq(irq_get_irq_data(nmi_virq));
299 	}
300 
301 	nemo_init_IRQ(mpic);
302 
303 	of_node_put(mpic_node);
304 	of_node_put(root);
305 }
306 
pas_progress(char * s,unsigned short hex)307 static void __init pas_progress(char *s, unsigned short hex)
308 {
309 	printk("[%04x] : %s\n", hex, s ? s : "");
310 }
311 
312 
pas_machine_check_handler(struct pt_regs * regs)313 static int pas_machine_check_handler(struct pt_regs *regs)
314 {
315 	int cpu = smp_processor_id();
316 	unsigned long srr0, srr1, dsisr;
317 	int dump_slb = 0;
318 	int i;
319 
320 	srr0 = regs->nip;
321 	srr1 = regs->msr;
322 
323 	if (nmi_virq && mpic_get_mcirq() == nmi_virq) {
324 		pr_err("NMI delivered\n");
325 		debugger(regs);
326 		mpic_end_irq(irq_get_irq_data(nmi_virq));
327 		goto out;
328 	}
329 
330 	dsisr = mfspr(SPRN_DSISR);
331 	pr_err("Machine Check on CPU %d\n", cpu);
332 	pr_err("SRR0  0x%016lx SRR1 0x%016lx\n", srr0, srr1);
333 	pr_err("DSISR 0x%016lx DAR  0x%016lx\n", dsisr, regs->dar);
334 	pr_err("BER   0x%016lx MER  0x%016lx\n", mfspr(SPRN_PA6T_BER),
335 		mfspr(SPRN_PA6T_MER));
336 	pr_err("IER   0x%016lx DER  0x%016lx\n", mfspr(SPRN_PA6T_IER),
337 		mfspr(SPRN_PA6T_DER));
338 	pr_err("Cause:\n");
339 
340 	if (srr1 & 0x200000)
341 		pr_err("Signalled by SDC\n");
342 
343 	if (srr1 & 0x100000) {
344 		pr_err("Load/Store detected error:\n");
345 		if (dsisr & 0x8000)
346 			pr_err("D-cache ECC double-bit error or bus error\n");
347 		if (dsisr & 0x4000)
348 			pr_err("LSU snoop response error\n");
349 		if (dsisr & 0x2000) {
350 			pr_err("MMU SLB multi-hit or invalid B field\n");
351 			dump_slb = 1;
352 		}
353 		if (dsisr & 0x1000)
354 			pr_err("Recoverable Duptags\n");
355 		if (dsisr & 0x800)
356 			pr_err("Recoverable D-cache parity error count overflow\n");
357 		if (dsisr & 0x400)
358 			pr_err("TLB parity error count overflow\n");
359 	}
360 
361 	if (srr1 & 0x80000)
362 		pr_err("Bus Error\n");
363 
364 	if (srr1 & 0x40000) {
365 		pr_err("I-side SLB multiple hit\n");
366 		dump_slb = 1;
367 	}
368 
369 	if (srr1 & 0x20000)
370 		pr_err("I-cache parity error hit\n");
371 
372 	if (num_mce_regs == 0)
373 		pr_err("No MCE registers mapped yet, can't dump\n");
374 	else
375 		pr_err("SoC debug registers:\n");
376 
377 	for (i = 0; i < num_mce_regs; i++)
378 		pr_err("%s: 0x%08x\n", mce_regs[i].name,
379 			in_le32(mce_regs[i].addr));
380 
381 	if (dump_slb) {
382 		unsigned long e, v;
383 		int i;
384 
385 		pr_err("slb contents:\n");
386 		for (i = 0; i < mmu_slb_size; i++) {
387 			asm volatile("slbmfee  %0,%1" : "=r" (e) : "r" (i));
388 			asm volatile("slbmfev  %0,%1" : "=r" (v) : "r" (i));
389 			pr_err("%02d %016lx %016lx\n", i, e, v);
390 		}
391 	}
392 
393 out:
394 	/* SRR1[62] is from MSR[62] if recoverable, so pass that back */
395 	return !!(srr1 & 0x2);
396 }
397 
398 static const struct of_device_id pasemi_bus_ids[] = {
399 	/* Unfortunately needed for legacy firmwares */
400 	{ .type = "localbus", },
401 	{ .type = "sdc", },
402 	/* These are the proper entries, which newer firmware uses */
403 	{ .compatible = "pasemi,localbus", },
404 	{ .compatible = "pasemi,sdc", },
405 	{},
406 };
407 
pasemi_publish_devices(void)408 static int __init pasemi_publish_devices(void)
409 {
410 	/* Publish OF platform devices for SDC and other non-PCI devices */
411 	of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
412 
413 	nemo_init_rtc();
414 
415 	return 0;
416 }
417 machine_device_initcall(pasemi, pasemi_publish_devices);
418 
419 
420 /*
421  * Called very early, MMU is off, device-tree isn't unflattened
422  */
pas_probe(void)423 static int __init pas_probe(void)
424 {
425 	if (!of_machine_is_compatible("PA6T-1682M") &&
426 	    !of_machine_is_compatible("pasemi,pwrficient"))
427 		return 0;
428 
429 #ifdef CONFIG_PPC_PASEMI_NEMO
430 	/*
431 	 * Check for the Nemo motherboard here, if we are running on one
432 	 * change the machine definition to fit
433 	 */
434 	if (of_machine_is_compatible("pasemi,nemo")) {
435 		pm_power_off		= pas_shutdown;
436 		ppc_md.name		= "A-EON Amigaone X1000";
437 	}
438 #endif
439 
440 	iommu_init_early_pasemi();
441 
442 	return 1;
443 }
444 
define_machine(pasemi)445 define_machine(pasemi) {
446 	.name			= "PA Semi PWRficient",
447 	.probe			= pas_probe,
448 	.setup_arch		= pas_setup_arch,
449 	.discover_phbs		= pas_pci_init,
450 	.init_IRQ		= pas_init_IRQ,
451 	.get_irq		= mpic_get_irq,
452 	.restart		= pas_restart,
453 	.get_boot_time		= pas_get_boot_time,
454 	.progress		= pas_progress,
455 	.machine_check_exception = pas_machine_check_handler,
456 };
457