1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright 2000-2020 Broadcom Inc. All rights reserved. 4 * 5 * 6 * Name: mpi2_ioc.h 7 * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages 8 * Creation Date: October 11, 2006 9 * 10 * mpi2_ioc.h Version: 02.00.37 11 * 12 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 13 * prefix are for use only on MPI v2.5 products, and must not be used 14 * with MPI v2.0 products. Unless otherwise noted, names beginning with 15 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. 16 * 17 * Version History 18 * --------------- 19 * 20 * Date Version Description 21 * -------- -------- ------------------------------------------------------ 22 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 23 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to 24 * MaxTargets. 25 * Added TotalImageSize field to FWDownload Request. 26 * Added reserved words to FWUpload Request. 27 * 06-26-07 02.00.02 Added IR Configuration Change List Event. 28 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit 29 * request and replaced it with 30 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. 31 * Replaced the MinReplyQueueDepth field of the IOCFacts 32 * reply with MaxReplyDescriptorPostQueueDepth. 33 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum 34 * depth for the Reply Descriptor Post Queue. 35 * Added SASAddress field to Initiator Device Table 36 * Overflow Event data. 37 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING 38 * for SAS Initiator Device Status Change Event data. 39 * Modified Reason Code defines for SAS Topology Change 40 * List Event data, including adding a bit for PHY Vacant 41 * status, and adding a mask for the Reason Code. 42 * Added define for 43 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. 44 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. 45 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of 46 * the IOCFacts Reply. 47 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 48 * Moved MPI2_VERSION_UNION to mpi2.h. 49 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks 50 * instead of enables, and added SASBroadcastPrimitiveMasks 51 * field. 52 * Added Log Entry Added Event and related structure. 53 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. 54 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. 55 * Added MaxVolumes and MaxPersistentEntries fields to 56 * IOCFacts reply. 57 * Added ProtocalFlags and IOCCapabilities fields to 58 * MPI2_FW_IMAGE_HEADER. 59 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. 60 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to 61 * a U16 (from a U32). 62 * Removed extra 's' from EventMasks name. 63 * 06-27-08 02.00.08 Fixed an offset in a comment. 64 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. 65 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and 66 * renamed MinReplyFrameSize to ReplyFrameSize. 67 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. 68 * Added two new RAIDOperation values for Integrated RAID 69 * Operations Status Event data. 70 * Added four new IR Configuration Change List Event data 71 * ReasonCode values. 72 * Added two new ReasonCode defines for SAS Device Status 73 * Change Event data. 74 * Added three new DiscoveryStatus bits for the SAS 75 * Discovery event data. 76 * Added Multiplexing Status Change bit to the PhyStatus 77 * field of the SAS Topology Change List event data. 78 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. 79 * BootFlags are now product-specific. 80 * Added defines for the indivdual signature bytes 81 * for MPI2_INIT_IMAGE_FOOTER. 82 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. 83 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR 84 * define. 85 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE 86 * define. 87 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. 88 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. 89 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. 90 * Added two new reason codes for SAS Device Status Change 91 * Event. 92 * Added new event: SAS PHY Counter. 93 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. 94 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 95 * Added new product id family for 2208. 96 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. 97 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. 98 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. 99 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. 100 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. 101 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. 102 * Added Host Based Discovery Phy Event data. 103 * Added defines for ProductID Product field 104 * (MPI2_FW_HEADER_PID_). 105 * Modified values for SAS ProductID Family 106 * (MPI2_FW_HEADER_PID_FAMILY_). 107 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. 108 * Added PowerManagementControl Request structures and 109 * defines. 110 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. 111 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. 112 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. 113 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added 114 * SASNotifyPrimitiveMasks field to 115 * MPI2_EVENT_NOTIFICATION_REQUEST. 116 * Added Temperature Threshold Event. 117 * Added Host Message Event. 118 * Added Send Host Message request and reply. 119 * 05-25-11 02.00.18 For Extended Image Header, added 120 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and 121 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. 122 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. 123 * 08-24-11 02.00.19 Added PhysicalPort field to 124 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. 125 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. 126 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. 127 * 03-29-12 02.00.21 Added a product specific range to event values. 128 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. 129 * Added ElapsedSeconds field to 130 * MPI2_EVENT_DATA_IR_OPERATION_STATUS. 131 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE 132 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. 133 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. 134 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. 135 * Added Encrypted Hash Extended Image. 136 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. 137 * 11-18-14 02.00.25 Updated copyright information. 138 * 03-16-15 02.00.26 Updated for MPI v2.6. 139 * Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and 140 * MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT. 141 * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and 142 * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. 143 * Added MPI26_CTRL_OP_SHUTDOWN. 144 * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. 145 * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. 146 * Added ConigurationFlags field to IOCInit message to 147 * support NVMe SGL format control. 148 * Added PCIe SRIOV support. 149 * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. 150 * Added PCIe 4 16.0 GT/sec speec support. 151 * Removed AHCI support. 152 * Removed SOP support. 153 * 07-01-16 02.00.29 Added Archclass for 4008 product. 154 * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED 155 * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload 156 * Request Message. 157 * Added new defines for the ImageType field of FWUpload 158 * Request Message. 159 * Added new values for the RegionType field in the Layout 160 * Data sections of the FLASH Layout Extended Image Data. 161 * Added new defines for the ReasonCode field of 162 * Active Cable Exception Event. 163 * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and 164 * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. 165 * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and 166 * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. 167 * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. 168 * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related 169 * defines for the ReasonCode field. 170 * 06-13-17 02.00.33 Added MPI2_FW_DOWNLOAD_ITYPE_CPLD. 171 * 09-29-17 02.00.34 Added MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED 172 * to the ReasonCode field in PCIe Device Status Change 173 * Event Data. 174 * 07-22-18 02.00.35 Added FW_DOWNLOAD_ITYPE_CPLD and _PSOC. 175 * Moved FW image definitions ionto new mpi2_image,h 176 * 08-14-18 02.00.36 Fixed definition of MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) 177 * 09-07-18 02.00.37 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES 178 * 10-02-19 02.00.38 Added MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE 179 * Added MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED 180 * Added MPI2_FW_DOWNLOAD_ITYPE_COREDUMP 181 * Added MPI2_FW_UPLOAD_ITYPE_COREDUMP 182 * -------------------------------------------------------------------------- 183 */ 184 185 #ifndef MPI2_IOC_H 186 #define MPI2_IOC_H 187 188 /***************************************************************************** 189 * 190 * IOC Messages 191 * 192 *****************************************************************************/ 193 194 /**************************************************************************** 195 * IOCInit message 196 ****************************************************************************/ 197 198 /*IOCInit Request message */ 199 typedef struct _MPI2_IOC_INIT_REQUEST { 200 U8 WhoInit; /*0x00 */ 201 U8 Reserved1; /*0x01 */ 202 U8 ChainOffset; /*0x02 */ 203 U8 Function; /*0x03 */ 204 U16 Reserved2; /*0x04 */ 205 U8 Reserved3; /*0x06 */ 206 U8 MsgFlags; /*0x07 */ 207 U8 VP_ID; /*0x08 */ 208 U8 VF_ID; /*0x09 */ 209 U16 Reserved4; /*0x0A */ 210 U16 MsgVersion; /*0x0C */ 211 U16 HeaderVersion; /*0x0E */ 212 U32 Reserved5; /*0x10 */ 213 U16 ConfigurationFlags; /* 0x14 */ 214 U8 HostPageSize; /*0x16 */ 215 U8 HostMSIxVectors; /*0x17 */ 216 U16 Reserved8; /*0x18 */ 217 U16 SystemRequestFrameSize; /*0x1A */ 218 U16 ReplyDescriptorPostQueueDepth; /*0x1C */ 219 U16 ReplyFreeQueueDepth; /*0x1E */ 220 U32 SenseBufferAddressHigh; /*0x20 */ 221 U32 SystemReplyAddressHigh; /*0x24 */ 222 U64 SystemRequestFrameBaseAddress; /*0x28 */ 223 U64 ReplyDescriptorPostQueueAddress; /*0x30 */ 224 U64 ReplyFreeQueueAddress; /*0x38 */ 225 U64 TimeStamp; /*0x40 */ 226 } MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST, 227 Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t; 228 229 /*WhoInit values */ 230 #define MPI2_WHOINIT_NOT_INITIALIZED (0x00) 231 #define MPI2_WHOINIT_SYSTEM_BIOS (0x01) 232 #define MPI2_WHOINIT_ROM_BIOS (0x02) 233 #define MPI2_WHOINIT_PCI_PEER (0x03) 234 #define MPI2_WHOINIT_HOST_DRIVER (0x04) 235 #define MPI2_WHOINIT_MANUFACTURER (0x05) 236 237 /* MsgFlags */ 238 #define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01) 239 240 241 /*MsgVersion */ 242 #define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) 243 #define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) 244 #define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) 245 #define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) 246 247 /*HeaderVersion */ 248 #define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) 249 #define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) 250 #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) 251 #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) 252 253 /*ConfigurationFlags */ 254 #define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) 255 #define MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE (0x0002) 256 257 /*minimum depth for a Reply Descriptor Post Queue */ 258 #define MPI2_RDPQ_DEPTH_MIN (16) 259 260 /* Reply Descriptor Post Queue Array Entry */ 261 typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY { 262 U64 RDPQBaseAddress; /* 0x00 */ 263 U32 Reserved1; /* 0x08 */ 264 U32 Reserved2; /* 0x0C */ 265 } MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 266 *PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY, 267 Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry; 268 269 270 /*IOCInit Reply message */ 271 typedef struct _MPI2_IOC_INIT_REPLY { 272 U8 WhoInit; /*0x00 */ 273 U8 Reserved1; /*0x01 */ 274 U8 MsgLength; /*0x02 */ 275 U8 Function; /*0x03 */ 276 U16 Reserved2; /*0x04 */ 277 U8 Reserved3; /*0x06 */ 278 U8 MsgFlags; /*0x07 */ 279 U8 VP_ID; /*0x08 */ 280 U8 VF_ID; /*0x09 */ 281 U16 Reserved4; /*0x0A */ 282 U16 Reserved5; /*0x0C */ 283 U16 IOCStatus; /*0x0E */ 284 U32 IOCLogInfo; /*0x10 */ 285 } MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY, 286 Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t; 287 288 /**************************************************************************** 289 * IOCFacts message 290 ****************************************************************************/ 291 292 /*IOCFacts Request message */ 293 typedef struct _MPI2_IOC_FACTS_REQUEST { 294 U16 Reserved1; /*0x00 */ 295 U8 ChainOffset; /*0x02 */ 296 U8 Function; /*0x03 */ 297 U16 Reserved2; /*0x04 */ 298 U8 Reserved3; /*0x06 */ 299 U8 MsgFlags; /*0x07 */ 300 U8 VP_ID; /*0x08 */ 301 U8 VF_ID; /*0x09 */ 302 U16 Reserved4; /*0x0A */ 303 } MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST, 304 Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t; 305 306 /*IOCFacts Reply message */ 307 typedef struct _MPI2_IOC_FACTS_REPLY { 308 U16 MsgVersion; /*0x00 */ 309 U8 MsgLength; /*0x02 */ 310 U8 Function; /*0x03 */ 311 U16 HeaderVersion; /*0x04 */ 312 U8 IOCNumber; /*0x06 */ 313 U8 MsgFlags; /*0x07 */ 314 U8 VP_ID; /*0x08 */ 315 U8 VF_ID; /*0x09 */ 316 U16 Reserved1; /*0x0A */ 317 U16 IOCExceptions; /*0x0C */ 318 U16 IOCStatus; /*0x0E */ 319 U32 IOCLogInfo; /*0x10 */ 320 U8 MaxChainDepth; /*0x14 */ 321 U8 WhoInit; /*0x15 */ 322 U8 NumberOfPorts; /*0x16 */ 323 U8 MaxMSIxVectors; /*0x17 */ 324 U16 RequestCredit; /*0x18 */ 325 U16 ProductID; /*0x1A */ 326 U32 IOCCapabilities; /*0x1C */ 327 MPI2_VERSION_UNION FWVersion; /*0x20 */ 328 U16 IOCRequestFrameSize; /*0x24 */ 329 U16 IOCMaxChainSegmentSize; /*0x26 */ 330 U16 MaxInitiators; /*0x28 */ 331 U16 MaxTargets; /*0x2A */ 332 U16 MaxSasExpanders; /*0x2C */ 333 U16 MaxEnclosures; /*0x2E */ 334 U16 ProtocolFlags; /*0x30 */ 335 U16 HighPriorityCredit; /*0x32 */ 336 U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */ 337 U8 ReplyFrameSize; /*0x36 */ 338 U8 MaxVolumes; /*0x37 */ 339 U16 MaxDevHandle; /*0x38 */ 340 U16 MaxPersistentEntries; /*0x3A */ 341 U16 MinDevHandle; /*0x3C */ 342 U8 CurrentHostPageSize; /* 0x3E */ 343 U8 Reserved4; /* 0x3F */ 344 U8 SGEModifierMask; /*0x40 */ 345 U8 SGEModifierValue; /*0x41 */ 346 U8 SGEModifierShift; /*0x42 */ 347 U8 Reserved5; /*0x43 */ 348 } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, 349 Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; 350 351 /*MsgVersion */ 352 #define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) 353 #define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) 354 #define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) 355 #define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) 356 357 /*HeaderVersion */ 358 #define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) 359 #define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) 360 #define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) 361 #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) 362 363 /*IOCExceptions */ 364 #define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) 365 #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) 366 #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) 367 368 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) 369 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) 370 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) 371 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) 372 #define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) 373 374 #define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) 375 #define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) 376 #define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) 377 #define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) 378 #define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) 379 380 /*defines for WhoInit field are after the IOCInit Request */ 381 382 /*ProductID field uses MPI2_FW_HEADER_PID_ */ 383 384 /*IOCCapabilities */ 385 #define MPI26_IOCFACTS_CAPABILITY_COREDUMP_ENABLED (0x00200000) 386 #define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) 387 #define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) 388 #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) 389 #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) 390 #define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000) 391 #define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000) 392 #define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000) 393 #define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) 394 #define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) 395 #define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) 396 #define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) 397 #define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) 398 #define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) 399 #define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020) 400 #define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) 401 #define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) 402 #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) 403 404 /*ProtocolFlags */ 405 #define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) 406 #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) 407 #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) 408 409 /**************************************************************************** 410 * PortFacts message 411 ****************************************************************************/ 412 413 /*PortFacts Request message */ 414 typedef struct _MPI2_PORT_FACTS_REQUEST { 415 U16 Reserved1; /*0x00 */ 416 U8 ChainOffset; /*0x02 */ 417 U8 Function; /*0x03 */ 418 U16 Reserved2; /*0x04 */ 419 U8 PortNumber; /*0x06 */ 420 U8 MsgFlags; /*0x07 */ 421 U8 VP_ID; /*0x08 */ 422 U8 VF_ID; /*0x09 */ 423 U16 Reserved3; /*0x0A */ 424 } MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST, 425 Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t; 426 427 /*PortFacts Reply message */ 428 typedef struct _MPI2_PORT_FACTS_REPLY { 429 U16 Reserved1; /*0x00 */ 430 U8 MsgLength; /*0x02 */ 431 U8 Function; /*0x03 */ 432 U16 Reserved2; /*0x04 */ 433 U8 PortNumber; /*0x06 */ 434 U8 MsgFlags; /*0x07 */ 435 U8 VP_ID; /*0x08 */ 436 U8 VF_ID; /*0x09 */ 437 U16 Reserved3; /*0x0A */ 438 U16 Reserved4; /*0x0C */ 439 U16 IOCStatus; /*0x0E */ 440 U32 IOCLogInfo; /*0x10 */ 441 U8 Reserved5; /*0x14 */ 442 U8 PortType; /*0x15 */ 443 U16 Reserved6; /*0x16 */ 444 U16 MaxPostedCmdBuffers; /*0x18 */ 445 U16 Reserved7; /*0x1A */ 446 } MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY, 447 Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t; 448 449 /*PortType values */ 450 #define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) 451 #define MPI2_PORTFACTS_PORTTYPE_FC (0x10) 452 #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) 453 #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) 454 #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) 455 #define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) 456 457 458 /**************************************************************************** 459 * PortEnable message 460 ****************************************************************************/ 461 462 /*PortEnable Request message */ 463 typedef struct _MPI2_PORT_ENABLE_REQUEST { 464 U16 Reserved1; /*0x00 */ 465 U8 ChainOffset; /*0x02 */ 466 U8 Function; /*0x03 */ 467 U8 Reserved2; /*0x04 */ 468 U8 PortFlags; /*0x05 */ 469 U8 Reserved3; /*0x06 */ 470 U8 MsgFlags; /*0x07 */ 471 U8 VP_ID; /*0x08 */ 472 U8 VF_ID; /*0x09 */ 473 U16 Reserved4; /*0x0A */ 474 } MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST, 475 Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t; 476 477 /*PortEnable Reply message */ 478 typedef struct _MPI2_PORT_ENABLE_REPLY { 479 U16 Reserved1; /*0x00 */ 480 U8 MsgLength; /*0x02 */ 481 U8 Function; /*0x03 */ 482 U8 Reserved2; /*0x04 */ 483 U8 PortFlags; /*0x05 */ 484 U8 Reserved3; /*0x06 */ 485 U8 MsgFlags; /*0x07 */ 486 U8 VP_ID; /*0x08 */ 487 U8 VF_ID; /*0x09 */ 488 U16 Reserved4; /*0x0A */ 489 U16 Reserved5; /*0x0C */ 490 U16 IOCStatus; /*0x0E */ 491 U32 IOCLogInfo; /*0x10 */ 492 } MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY, 493 Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t; 494 495 /**************************************************************************** 496 * EventNotification message 497 ****************************************************************************/ 498 499 /*EventNotification Request message */ 500 #define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) 501 502 typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST { 503 U16 Reserved1; /*0x00 */ 504 U8 ChainOffset; /*0x02 */ 505 U8 Function; /*0x03 */ 506 U16 Reserved2; /*0x04 */ 507 U8 Reserved3; /*0x06 */ 508 U8 MsgFlags; /*0x07 */ 509 U8 VP_ID; /*0x08 */ 510 U8 VF_ID; /*0x09 */ 511 U16 Reserved4; /*0x0A */ 512 U32 Reserved5; /*0x0C */ 513 U32 Reserved6; /*0x10 */ 514 U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */ 515 U16 SASBroadcastPrimitiveMasks; /*0x24 */ 516 U16 SASNotifyPrimitiveMasks; /*0x26 */ 517 U32 Reserved8; /*0x28 */ 518 } MPI2_EVENT_NOTIFICATION_REQUEST, 519 *PTR_MPI2_EVENT_NOTIFICATION_REQUEST, 520 Mpi2EventNotificationRequest_t, 521 *pMpi2EventNotificationRequest_t; 522 523 /*EventNotification Reply message */ 524 typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { 525 U16 EventDataLength; /*0x00 */ 526 U8 MsgLength; /*0x02 */ 527 U8 Function; /*0x03 */ 528 U16 Reserved1; /*0x04 */ 529 U8 AckRequired; /*0x06 */ 530 U8 MsgFlags; /*0x07 */ 531 U8 VP_ID; /*0x08 */ 532 U8 VF_ID; /*0x09 */ 533 U16 Reserved2; /*0x0A */ 534 U16 Reserved3; /*0x0C */ 535 U16 IOCStatus; /*0x0E */ 536 U32 IOCLogInfo; /*0x10 */ 537 U16 Event; /*0x14 */ 538 U16 Reserved4; /*0x16 */ 539 U32 EventContext; /*0x18 */ 540 U32 EventData[]; /*0x1C */ 541 } MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY, 542 Mpi2EventNotificationReply_t, 543 *pMpi2EventNotificationReply_t; 544 545 /*AckRequired */ 546 #define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) 547 #define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) 548 549 /*Event */ 550 #define MPI2_EVENT_LOG_DATA (0x0001) 551 #define MPI2_EVENT_STATE_CHANGE (0x0002) 552 #define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) 553 #define MPI2_EVENT_EVENT_CHANGE (0x000A) 554 #define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */ 555 #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) 556 #define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) 557 #define MPI2_EVENT_SAS_DISCOVERY (0x0016) 558 #define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) 559 #define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) 560 #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) 561 #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) 562 #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) 563 #define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) 564 #define MPI2_EVENT_IR_VOLUME (0x001E) 565 #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) 566 #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) 567 #define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) 568 #define MPI2_EVENT_SAS_PHY_COUNTER (0x0022) 569 #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) 570 #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) 571 #define MPI2_EVENT_SAS_QUIESCE (0x0025) 572 #define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) 573 #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) 574 #define MPI2_EVENT_HOST_MESSAGE (0x0028) 575 #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) 576 #define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) 577 #define MPI2_EVENT_PCIE_ENUMERATION (0x0031) 578 #define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) 579 #define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) 580 #define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) 581 #define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) 582 #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) 583 #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) 584 585 /*Log Entry Added Event data */ 586 587 /*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ 588 #define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) 589 590 typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED { 591 U64 TimeStamp; /*0x00 */ 592 U32 Reserved1; /*0x08 */ 593 U16 LogSequence; /*0x0C */ 594 U16 LogEntryQualifier; /*0x0E */ 595 U8 VP_ID; /*0x10 */ 596 U8 VF_ID; /*0x11 */ 597 U16 Reserved2; /*0x12 */ 598 U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */ 599 } MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 600 *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, 601 Mpi2EventDataLogEntryAdded_t, 602 *pMpi2EventDataLogEntryAdded_t; 603 604 /*GPIO Interrupt Event data */ 605 606 typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { 607 U8 GPIONum; /*0x00 */ 608 U8 Reserved1; /*0x01 */ 609 U16 Reserved2; /*0x02 */ 610 } MPI2_EVENT_DATA_GPIO_INTERRUPT, 611 *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, 612 Mpi2EventDataGpioInterrupt_t, 613 *pMpi2EventDataGpioInterrupt_t; 614 615 /*Temperature Threshold Event data */ 616 617 typedef struct _MPI2_EVENT_DATA_TEMPERATURE { 618 U16 Status; /*0x00 */ 619 U8 SensorNum; /*0x02 */ 620 U8 Reserved1; /*0x03 */ 621 U16 CurrentTemperature; /*0x04 */ 622 U16 Reserved2; /*0x06 */ 623 U32 Reserved3; /*0x08 */ 624 U32 Reserved4; /*0x0C */ 625 } MPI2_EVENT_DATA_TEMPERATURE, 626 *PTR_MPI2_EVENT_DATA_TEMPERATURE, 627 Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t; 628 629 /*Temperature Threshold Event data Status bits */ 630 #define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) 631 #define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) 632 #define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) 633 #define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) 634 635 /*Host Message Event data */ 636 637 typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { 638 U8 SourceVF_ID; /*0x00 */ 639 U8 Reserved1; /*0x01 */ 640 U16 Reserved2; /*0x02 */ 641 U32 Reserved3; /*0x04 */ 642 U32 HostData[]; /*0x08 */ 643 } MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE, 644 Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t; 645 646 /*Power Performance Change Event data */ 647 648 typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE { 649 U8 CurrentPowerMode; /*0x00 */ 650 U8 PreviousPowerMode; /*0x01 */ 651 U16 Reserved1; /*0x02 */ 652 } MPI2_EVENT_DATA_POWER_PERF_CHANGE, 653 *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE, 654 Mpi2EventDataPowerPerfChange_t, 655 *pMpi2EventDataPowerPerfChange_t; 656 657 /*defines for CurrentPowerMode and PreviousPowerMode fields */ 658 #define MPI2_EVENT_PM_INIT_MASK (0xC0) 659 #define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00) 660 #define MPI2_EVENT_PM_INIT_HOST (0x40) 661 #define MPI2_EVENT_PM_INIT_IO_UNIT (0x80) 662 #define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0) 663 664 #define MPI2_EVENT_PM_MODE_MASK (0x07) 665 #define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00) 666 #define MPI2_EVENT_PM_MODE_UNKNOWN (0x01) 667 #define MPI2_EVENT_PM_MODE_FULL_POWER (0x04) 668 #define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05) 669 #define MPI2_EVENT_PM_MODE_STANDBY (0x06) 670 671 /* Active Cable Exception Event data */ 672 673 typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT { 674 U32 ActiveCablePowerRequirement; /* 0x00 */ 675 U8 ReasonCode; /* 0x04 */ 676 U8 ReceptacleID; /* 0x05 */ 677 U16 Reserved1; /* 0x06 */ 678 } MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 679 *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 680 Mpi25EventDataActiveCableExcept_t, 681 *pMpi25EventDataActiveCableExcept_t, 682 MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 683 *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, 684 Mpi26EventDataActiveCableExcept_t, 685 *pMpi26EventDataActiveCableExcept_t; 686 687 /*MPI2.5 defines for the ReasonCode field */ 688 #define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) 689 #define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) 690 #define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) 691 692 /* defines for ReasonCode field */ 693 #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) 694 #define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) 695 #define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02) 696 697 /*Hard Reset Received Event data */ 698 699 typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED { 700 U8 Reserved1; /*0x00 */ 701 U8 Port; /*0x01 */ 702 U16 Reserved2; /*0x02 */ 703 } MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 704 *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, 705 Mpi2EventDataHardResetReceived_t, 706 *pMpi2EventDataHardResetReceived_t; 707 708 /*Task Set Full Event data */ 709 /* this event is obsolete */ 710 711 typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL { 712 U16 DevHandle; /*0x00 */ 713 U16 CurrentDepth; /*0x02 */ 714 } MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL, 715 Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t; 716 717 /*SAS Device Status Change Event data */ 718 719 typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE { 720 U16 TaskTag; /*0x00 */ 721 U8 ReasonCode; /*0x02 */ 722 U8 PhysicalPort; /*0x03 */ 723 U8 ASC; /*0x04 */ 724 U8 ASCQ; /*0x05 */ 725 U16 DevHandle; /*0x06 */ 726 U32 Reserved2; /*0x08 */ 727 U64 SASAddress; /*0x0C */ 728 U8 LUN[8]; /*0x14 */ 729 } MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 730 *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, 731 Mpi2EventDataSasDeviceStatusChange_t, 732 *pMpi2EventDataSasDeviceStatusChange_t; 733 734 /*SAS Device Status Change Event data ReasonCode values */ 735 #define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) 736 #define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) 737 #define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 738 #define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 739 #define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 740 #define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 741 #define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 742 #define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 743 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 744 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 745 #define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) 746 #define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11) 747 #define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12) 748 749 /*Integrated RAID Operation Status Event data */ 750 751 typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS { 752 U16 VolDevHandle; /*0x00 */ 753 U16 Reserved1; /*0x02 */ 754 U8 RAIDOperation; /*0x04 */ 755 U8 PercentComplete; /*0x05 */ 756 U16 Reserved2; /*0x06 */ 757 U32 ElapsedSeconds; /*0x08 */ 758 } MPI2_EVENT_DATA_IR_OPERATION_STATUS, 759 *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, 760 Mpi2EventDataIrOperationStatus_t, 761 *pMpi2EventDataIrOperationStatus_t; 762 763 /*Integrated RAID Operation Status Event data RAIDOperation values */ 764 #define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) 765 #define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) 766 #define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) 767 #define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) 768 #define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) 769 770 /*Integrated RAID Volume Event data */ 771 772 typedef struct _MPI2_EVENT_DATA_IR_VOLUME { 773 U16 VolDevHandle; /*0x00 */ 774 U8 ReasonCode; /*0x02 */ 775 U8 Reserved1; /*0x03 */ 776 U32 NewValue; /*0x04 */ 777 U32 PreviousValue; /*0x08 */ 778 } MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME, 779 Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t; 780 781 /*Integrated RAID Volume Event data ReasonCode values */ 782 #define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) 783 #define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) 784 #define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) 785 786 /*Integrated RAID Physical Disk Event data */ 787 788 typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { 789 U16 Reserved1; /*0x00 */ 790 U8 ReasonCode; /*0x02 */ 791 U8 PhysDiskNum; /*0x03 */ 792 U16 PhysDiskDevHandle; /*0x04 */ 793 U16 Reserved2; /*0x06 */ 794 U16 Slot; /*0x08 */ 795 U16 EnclosureHandle; /*0x0A */ 796 U32 NewValue; /*0x0C */ 797 U32 PreviousValue; /*0x10 */ 798 } MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 799 *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, 800 Mpi2EventDataIrPhysicalDisk_t, 801 *pMpi2EventDataIrPhysicalDisk_t; 802 803 /*Integrated RAID Physical Disk Event data ReasonCode values */ 804 #define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) 805 #define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) 806 #define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) 807 808 /*Integrated RAID Configuration Change List Event data */ 809 810 /* 811 *Host code (drivers, BIOS, utilities, etc.) should check NumElements at 812 *runtime before using ConfigElement[]. 813 */ 814 815 typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { 816 U16 ElementFlags; /*0x00 */ 817 U16 VolDevHandle; /*0x02 */ 818 U8 ReasonCode; /*0x04 */ 819 U8 PhysDiskNum; /*0x05 */ 820 U16 PhysDiskDevHandle; /*0x06 */ 821 } MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, 822 Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t; 823 824 /*IR Configuration Change List Event data ElementFlags values */ 825 #define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) 826 #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) 827 #define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) 828 #define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) 829 830 /*IR Configuration Change List Event data ReasonCode values */ 831 #define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) 832 #define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) 833 #define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) 834 #define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) 835 #define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) 836 #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) 837 #define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) 838 #define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) 839 #define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) 840 841 typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { 842 U8 NumElements; /*0x00 */ 843 U8 Reserved1; /*0x01 */ 844 U8 Reserved2; /*0x02 */ 845 U8 ConfigNum; /*0x03 */ 846 U32 Flags; /*0x04 */ 847 MPI2_EVENT_IR_CONFIG_ELEMENT 848 ConfigElement[];/*0x08 */ 849 } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 850 *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, 851 Mpi2EventDataIrConfigChangeList_t, 852 *pMpi2EventDataIrConfigChangeList_t; 853 854 /*IR Configuration Change List Event data Flags values */ 855 #define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) 856 857 /*SAS Discovery Event data */ 858 859 typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY { 860 U8 Flags; /*0x00 */ 861 U8 ReasonCode; /*0x01 */ 862 U8 PhysicalPort; /*0x02 */ 863 U8 Reserved1; /*0x03 */ 864 U32 DiscoveryStatus; /*0x04 */ 865 } MPI2_EVENT_DATA_SAS_DISCOVERY, 866 *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, 867 Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t; 868 869 /*SAS Discovery Event data Flags values */ 870 #define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) 871 #define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) 872 873 /*SAS Discovery Event data ReasonCode values */ 874 #define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) 875 #define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) 876 877 /*SAS Discovery Event data DiscoveryStatus values */ 878 #define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) 879 #define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) 880 #define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) 881 #define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) 882 #define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) 883 #define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) 884 #define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) 885 #define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) 886 #define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) 887 #define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) 888 #define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) 889 #define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) 890 #define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) 891 #define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) 892 #define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) 893 #define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) 894 #define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) 895 #define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) 896 #define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) 897 #define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) 898 899 /*SAS Broadcast Primitive Event data */ 900 901 typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE { 902 U8 PhyNum; /*0x00 */ 903 U8 Port; /*0x01 */ 904 U8 PortWidth; /*0x02 */ 905 U8 Primitive; /*0x03 */ 906 } MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 907 *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, 908 Mpi2EventDataSasBroadcastPrimitive_t, 909 *pMpi2EventDataSasBroadcastPrimitive_t; 910 911 /*defines for the Primitive field */ 912 #define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) 913 #define MPI2_EVENT_PRIMITIVE_SES (0x02) 914 #define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) 915 #define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) 916 #define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) 917 #define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) 918 #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) 919 #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) 920 921 /*SAS Notify Primitive Event data */ 922 923 typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { 924 U8 PhyNum; /*0x00 */ 925 U8 Port; /*0x01 */ 926 U8 Reserved1; /*0x02 */ 927 U8 Primitive; /*0x03 */ 928 } MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 929 *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, 930 Mpi2EventDataSasNotifyPrimitive_t, 931 *pMpi2EventDataSasNotifyPrimitive_t; 932 933 /*defines for the Primitive field */ 934 #define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) 935 #define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) 936 #define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) 937 #define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) 938 939 /*SAS Initiator Device Status Change Event data */ 940 941 typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE { 942 U8 ReasonCode; /*0x00 */ 943 U8 PhysicalPort; /*0x01 */ 944 U16 DevHandle; /*0x02 */ 945 U64 SASAddress; /*0x04 */ 946 } MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 947 *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, 948 Mpi2EventDataSasInitDevStatusChange_t, 949 *pMpi2EventDataSasInitDevStatusChange_t; 950 951 /*SAS Initiator Device Status Change event ReasonCode values */ 952 #define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) 953 #define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) 954 955 /*SAS Initiator Device Table Overflow Event data */ 956 957 typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { 958 U16 MaxInit; /*0x00 */ 959 U16 CurrentInit; /*0x02 */ 960 U64 SASAddress; /*0x04 */ 961 } MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 962 *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, 963 Mpi2EventDataSasInitTableOverflow_t, 964 *pMpi2EventDataSasInitTableOverflow_t; 965 966 /*SAS Topology Change List Event data */ 967 968 /* 969 *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at 970 *runtime before using PHY[]. 971 */ 972 973 typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { 974 U16 AttachedDevHandle; /*0x00 */ 975 U8 LinkRate; /*0x02 */ 976 U8 PhyStatus; /*0x03 */ 977 } MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, 978 Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t; 979 980 typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { 981 U16 EnclosureHandle; /*0x00 */ 982 U16 ExpanderDevHandle; /*0x02 */ 983 U8 NumPhys; /*0x04 */ 984 U8 Reserved1; /*0x05 */ 985 U16 Reserved2; /*0x06 */ 986 U8 NumEntries; /*0x08 */ 987 U8 StartPhyNum; /*0x09 */ 988 U8 ExpStatus; /*0x0A */ 989 U8 PhysicalPort; /*0x0B */ 990 MPI2_EVENT_SAS_TOPO_PHY_ENTRY 991 PHY[]; /*0x0C */ 992 } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 993 *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, 994 Mpi2EventDataSasTopologyChangeList_t, 995 *pMpi2EventDataSasTopologyChangeList_t; 996 997 /*values for the ExpStatus field */ 998 #define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00) 999 #define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) 1000 #define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) 1001 #define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) 1002 #define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) 1003 1004 /*defines for the LinkRate field */ 1005 #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) 1006 #define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) 1007 #define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) 1008 #define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) 1009 1010 #define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) 1011 #define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) 1012 #define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) 1013 #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) 1014 #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) 1015 #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) 1016 #define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06) 1017 #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) 1018 #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) 1019 #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) 1020 #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) 1021 #define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) 1022 1023 /*values for the PhyStatus field */ 1024 #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) 1025 #define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) 1026 /*values for the PhyStatus ReasonCode sub-field */ 1027 #define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) 1028 #define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) 1029 #define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) 1030 #define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) 1031 #define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) 1032 #define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) 1033 1034 /*SAS Enclosure Device Status Change Event data */ 1035 1036 typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { 1037 U16 EnclosureHandle; /*0x00 */ 1038 U8 ReasonCode; /*0x02 */ 1039 U8 PhysicalPort; /*0x03 */ 1040 U64 EnclosureLogicalID; /*0x04 */ 1041 U16 NumSlots; /*0x0C */ 1042 U16 StartSlot; /*0x0E */ 1043 U32 PhyBits; /*0x10 */ 1044 } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1045 *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, 1046 Mpi2EventDataSasEnclDevStatusChange_t, 1047 *pMpi2EventDataSasEnclDevStatusChange_t, 1048 MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, 1049 *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, 1050 Mpi26EventDataEnclDevStatusChange_t, 1051 *pMpi26EventDataEnclDevStatusChange_t; 1052 1053 /*SAS Enclosure Device Status Change event ReasonCode values */ 1054 #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) 1055 #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) 1056 1057 /*Enclosure Device Status Change event ReasonCode values */ 1058 #define MPI26_EVENT_ENCL_RC_ADDED (0x01) 1059 #define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) 1060 1061 1062 typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR { 1063 U16 DevHandle; /*0x00 */ 1064 U8 ReasonCode; /*0x02 */ 1065 U8 PhysicalPort; /*0x03 */ 1066 U32 Reserved1[2]; /*0x04 */ 1067 U64 SASAddress; /*0x0C */ 1068 U32 Reserved2[2]; /*0x14 */ 1069 } MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, 1070 *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, 1071 Mpi25EventDataSasDeviceDiscoveryError_t, 1072 *pMpi25EventDataSasDeviceDiscoveryError_t; 1073 1074 /*SAS Device Discovery Error Event data ReasonCode values */ 1075 #define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) 1076 #define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) 1077 1078 /*SAS PHY Counter Event data */ 1079 1080 typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { 1081 U64 TimeStamp; /*0x00 */ 1082 U32 Reserved1; /*0x08 */ 1083 U8 PhyEventCode; /*0x0C */ 1084 U8 PhyNum; /*0x0D */ 1085 U16 Reserved2; /*0x0E */ 1086 U32 PhyEventInfo; /*0x10 */ 1087 U8 CounterType; /*0x14 */ 1088 U8 ThresholdWindow; /*0x15 */ 1089 U8 TimeUnits; /*0x16 */ 1090 U8 Reserved3; /*0x17 */ 1091 U32 EventThreshold; /*0x18 */ 1092 U16 ThresholdFlags; /*0x1C */ 1093 U16 Reserved4; /*0x1E */ 1094 } MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1095 *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER, 1096 Mpi2EventDataSasPhyCounter_t, 1097 *pMpi2EventDataSasPhyCounter_t; 1098 1099 /*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h 1100 *for the PhyEventCode field */ 1101 1102 /*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h 1103 *for the CounterType field */ 1104 1105 /*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h 1106 *for the TimeUnits field */ 1107 1108 /*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h 1109 *for the ThresholdFlags field */ 1110 1111 /*SAS Quiesce Event data */ 1112 1113 typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE { 1114 U8 ReasonCode; /*0x00 */ 1115 U8 Reserved1; /*0x01 */ 1116 U16 Reserved2; /*0x02 */ 1117 U32 Reserved3; /*0x04 */ 1118 } MPI2_EVENT_DATA_SAS_QUIESCE, 1119 *PTR_MPI2_EVENT_DATA_SAS_QUIESCE, 1120 Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t; 1121 1122 /*SAS Quiesce Event data ReasonCode values */ 1123 #define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01) 1124 #define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02) 1125 1126 /*Host Based Discovery Phy Event data */ 1127 1128 typedef struct _MPI2_EVENT_HBD_PHY_SAS { 1129 U8 Flags; /*0x00 */ 1130 U8 NegotiatedLinkRate; /*0x01 */ 1131 U8 PhyNum; /*0x02 */ 1132 U8 PhysicalPort; /*0x03 */ 1133 U32 Reserved1; /*0x04 */ 1134 U8 InitialFrame[28]; /*0x08 */ 1135 } MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS, 1136 Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t; 1137 1138 /*values for the Flags field */ 1139 #define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02) 1140 #define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01) 1141 1142 /*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h 1143 *for the NegotiatedLinkRate field */ 1144 1145 typedef union _MPI2_EVENT_HBD_DESCRIPTOR { 1146 MPI2_EVENT_HBD_PHY_SAS Sas; 1147 } MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR, 1148 Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t; 1149 1150 typedef struct _MPI2_EVENT_DATA_HBD_PHY { 1151 U8 DescriptorType; /*0x00 */ 1152 U8 Reserved1; /*0x01 */ 1153 U16 Reserved2; /*0x02 */ 1154 U32 Reserved3; /*0x04 */ 1155 MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */ 1156 } MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY, 1157 Mpi2EventDataHbdPhy_t, 1158 *pMpi2EventDataMpi2EventDataHbdPhy_t; 1159 1160 /*values for the DescriptorType field */ 1161 #define MPI2_EVENT_HBD_DT_SAS (0x01) 1162 1163 1164 /*PCIe Device Status Change Event data (MPI v2.6 and later) */ 1165 1166 typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE { 1167 U16 TaskTag; /*0x00 */ 1168 U8 ReasonCode; /*0x02 */ 1169 U8 PhysicalPort; /*0x03 */ 1170 U8 ASC; /*0x04 */ 1171 U8 ASCQ; /*0x05 */ 1172 U16 DevHandle; /*0x06 */ 1173 U32 Reserved2; /*0x08 */ 1174 U64 WWID; /*0x0C */ 1175 U8 LUN[8]; /*0x14 */ 1176 } MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, 1177 *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, 1178 Mpi26EventDataPCIeDeviceStatusChange_t, 1179 *pMpi26EventDataPCIeDeviceStatusChange_t; 1180 1181 /*PCIe Device Status Change Event data ReasonCode values */ 1182 #define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) 1183 #define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) 1184 #define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) 1185 #define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) 1186 #define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) 1187 #define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) 1188 #define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) 1189 #define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) 1190 #define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) 1191 #define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) 1192 #define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) 1193 #define MPI26_EVENT_PCIDEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x11) 1194 1195 1196 /*PCIe Enumeration Event data (MPI v2.6 and later) */ 1197 1198 typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { 1199 U8 Flags; /*0x00 */ 1200 U8 ReasonCode; /*0x01 */ 1201 U8 PhysicalPort; /*0x02 */ 1202 U8 Reserved1; /*0x03 */ 1203 U32 EnumerationStatus; /*0x04 */ 1204 } MPI26_EVENT_DATA_PCIE_ENUMERATION, 1205 *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, 1206 Mpi26EventDataPCIeEnumeration_t, 1207 *pMpi26EventDataPCIeEnumeration_t; 1208 1209 /*PCIe Enumeration Event data Flags values */ 1210 #define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) 1211 #define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) 1212 1213 /*PCIe Enumeration Event data ReasonCode values */ 1214 #define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) 1215 #define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) 1216 1217 /*PCIe Enumeration Event data EnumerationStatus values */ 1218 #define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) 1219 #define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) 1220 #define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) 1221 1222 1223 /*PCIe Topology Change List Event data (MPI v2.6 and later) */ 1224 1225 /* 1226 *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at 1227 *runtime before using PortEntry[]. 1228 */ 1229 1230 typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { 1231 U16 AttachedDevHandle; /*0x00 */ 1232 U8 PortStatus; /*0x02 */ 1233 U8 Reserved1; /*0x03 */ 1234 U8 CurrentPortInfo; /*0x04 */ 1235 U8 Reserved2; /*0x05 */ 1236 U8 PreviousPortInfo; /*0x06 */ 1237 U8 Reserved3; /*0x07 */ 1238 } MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, 1239 *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, 1240 Mpi26EventPCIeTopoPortEntry_t, 1241 *pMpi26EventPCIeTopoPortEntry_t; 1242 1243 /*PCIe Topology Change List Event data PortStatus values */ 1244 #define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) 1245 #define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) 1246 #define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) 1247 #define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) 1248 #define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) 1249 1250 /*PCIe Topology Change List Event data defines for CurrentPortInfo and 1251 *PreviousPortInfo 1252 */ 1253 #define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) 1254 #define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) 1255 #define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) 1256 #define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) 1257 #define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) 1258 #define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) 1259 #define MPI26_EVENT_PCIE_TOPO_PI_16_LANES (0x50) 1260 1261 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) 1262 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) 1263 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) 1264 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) 1265 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) 1266 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) 1267 #define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) 1268 1269 typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { 1270 U16 EnclosureHandle; /*0x00 */ 1271 U16 SwitchDevHandle; /*0x02 */ 1272 U8 NumPorts; /*0x04 */ 1273 U8 Reserved1; /*0x05 */ 1274 U16 Reserved2; /*0x06 */ 1275 U8 NumEntries; /*0x08 */ 1276 U8 StartPortNum; /*0x09 */ 1277 U8 SwitchStatus; /*0x0A */ 1278 U8 PhysicalPort; /*0x0B */ 1279 MPI26_EVENT_PCIE_TOPO_PORT_ENTRY 1280 PortEntry[]; /*0x0C */ 1281 } MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, 1282 *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, 1283 Mpi26EventDataPCIeTopologyChangeList_t, 1284 *pMpi26EventDataPCIeTopologyChangeList_t; 1285 1286 /*PCIe Topology Change List Event data SwitchStatus values */ 1287 #define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) 1288 #define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) 1289 #define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) 1290 #define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) 1291 #define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) 1292 1293 /*PCIe Link Counter Event data (MPI v2.6 and later) */ 1294 1295 typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER { 1296 U64 TimeStamp; /*0x00 */ 1297 U32 Reserved1; /*0x08 */ 1298 U8 LinkEventCode; /*0x0C */ 1299 U8 LinkNum; /*0x0D */ 1300 U16 Reserved2; /*0x0E */ 1301 U32 LinkEventInfo; /*0x10 */ 1302 U8 CounterType; /*0x14 */ 1303 U8 ThresholdWindow; /*0x15 */ 1304 U8 TimeUnits; /*0x16 */ 1305 U8 Reserved3; /*0x17 */ 1306 U32 EventThreshold; /*0x18 */ 1307 U16 ThresholdFlags; /*0x1C */ 1308 U16 Reserved4; /*0x1E */ 1309 } MPI26_EVENT_DATA_PCIE_LINK_COUNTER, 1310 *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, 1311 Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t; 1312 1313 1314 /*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode 1315 *field 1316 */ 1317 1318 /*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType 1319 *field 1320 */ 1321 1322 /*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits 1323 *field 1324 */ 1325 1326 /*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags 1327 *field 1328 */ 1329 1330 /**************************************************************************** 1331 * EventAck message 1332 ****************************************************************************/ 1333 1334 /*EventAck Request message */ 1335 typedef struct _MPI2_EVENT_ACK_REQUEST { 1336 U16 Reserved1; /*0x00 */ 1337 U8 ChainOffset; /*0x02 */ 1338 U8 Function; /*0x03 */ 1339 U16 Reserved2; /*0x04 */ 1340 U8 Reserved3; /*0x06 */ 1341 U8 MsgFlags; /*0x07 */ 1342 U8 VP_ID; /*0x08 */ 1343 U8 VF_ID; /*0x09 */ 1344 U16 Reserved4; /*0x0A */ 1345 U16 Event; /*0x0C */ 1346 U16 Reserved5; /*0x0E */ 1347 U32 EventContext; /*0x10 */ 1348 } MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST, 1349 Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t; 1350 1351 /*EventAck Reply message */ 1352 typedef struct _MPI2_EVENT_ACK_REPLY { 1353 U16 Reserved1; /*0x00 */ 1354 U8 MsgLength; /*0x02 */ 1355 U8 Function; /*0x03 */ 1356 U16 Reserved2; /*0x04 */ 1357 U8 Reserved3; /*0x06 */ 1358 U8 MsgFlags; /*0x07 */ 1359 U8 VP_ID; /*0x08 */ 1360 U8 VF_ID; /*0x09 */ 1361 U16 Reserved4; /*0x0A */ 1362 U16 Reserved5; /*0x0C */ 1363 U16 IOCStatus; /*0x0E */ 1364 U32 IOCLogInfo; /*0x10 */ 1365 } MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY, 1366 Mpi2EventAckReply_t, *pMpi2EventAckReply_t; 1367 1368 /**************************************************************************** 1369 * SendHostMessage message 1370 ****************************************************************************/ 1371 1372 /*SendHostMessage Request message */ 1373 typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { 1374 U16 HostDataLength; /*0x00 */ 1375 U8 ChainOffset; /*0x02 */ 1376 U8 Function; /*0x03 */ 1377 U16 Reserved1; /*0x04 */ 1378 U8 Reserved2; /*0x06 */ 1379 U8 MsgFlags; /*0x07 */ 1380 U8 VP_ID; /*0x08 */ 1381 U8 VF_ID; /*0x09 */ 1382 U16 Reserved3; /*0x0A */ 1383 U8 Reserved4; /*0x0C */ 1384 U8 DestVF_ID; /*0x0D */ 1385 U16 Reserved5; /*0x0E */ 1386 U32 Reserved6; /*0x10 */ 1387 U32 Reserved7; /*0x14 */ 1388 U32 Reserved8; /*0x18 */ 1389 U32 Reserved9; /*0x1C */ 1390 U32 Reserved10; /*0x20 */ 1391 U32 HostData[]; /*0x24 */ 1392 } MPI2_SEND_HOST_MESSAGE_REQUEST, 1393 *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, 1394 Mpi2SendHostMessageRequest_t, 1395 *pMpi2SendHostMessageRequest_t; 1396 1397 /*SendHostMessage Reply message */ 1398 typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { 1399 U16 HostDataLength; /*0x00 */ 1400 U8 MsgLength; /*0x02 */ 1401 U8 Function; /*0x03 */ 1402 U16 Reserved1; /*0x04 */ 1403 U8 Reserved2; /*0x06 */ 1404 U8 MsgFlags; /*0x07 */ 1405 U8 VP_ID; /*0x08 */ 1406 U8 VF_ID; /*0x09 */ 1407 U16 Reserved3; /*0x0A */ 1408 U16 Reserved4; /*0x0C */ 1409 U16 IOCStatus; /*0x0E */ 1410 U32 IOCLogInfo; /*0x10 */ 1411 } MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY, 1412 Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t; 1413 1414 /**************************************************************************** 1415 * FWDownload message 1416 ****************************************************************************/ 1417 1418 /*MPI v2.0 FWDownload Request message */ 1419 typedef struct _MPI2_FW_DOWNLOAD_REQUEST { 1420 U8 ImageType; /*0x00 */ 1421 U8 Reserved1; /*0x01 */ 1422 U8 ChainOffset; /*0x02 */ 1423 U8 Function; /*0x03 */ 1424 U16 Reserved2; /*0x04 */ 1425 U8 Reserved3; /*0x06 */ 1426 U8 MsgFlags; /*0x07 */ 1427 U8 VP_ID; /*0x08 */ 1428 U8 VF_ID; /*0x09 */ 1429 U16 Reserved4; /*0x0A */ 1430 U32 TotalImageSize; /*0x0C */ 1431 U32 Reserved5; /*0x10 */ 1432 MPI2_MPI_SGE_UNION SGL; /*0x14 */ 1433 } MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST, 1434 Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest; 1435 1436 #define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) 1437 1438 #define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) 1439 #define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) 1440 #define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) 1441 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) 1442 #define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) 1443 #define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) 1444 #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) 1445 #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1446 #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) 1447 #define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) 1448 #define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) 1449 #define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) 1450 #define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) 1451 #define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) 1452 #define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) 1453 #define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) 1454 #define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) 1455 /*MPI v2.6 and newer */ 1456 #define MPI2_FW_DOWNLOAD_ITYPE_CPLD (0x15) 1457 #define MPI2_FW_DOWNLOAD_ITYPE_PSOC (0x16) 1458 #define MPI2_FW_DOWNLOAD_ITYPE_COREDUMP (0x17) 1459 #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) 1460 1461 /*MPI v2.0 FWDownload TransactionContext Element */ 1462 typedef struct _MPI2_FW_DOWNLOAD_TCSGE { 1463 U8 Reserved1; /*0x00 */ 1464 U8 ContextSize; /*0x01 */ 1465 U8 DetailsLength; /*0x02 */ 1466 U8 Flags; /*0x03 */ 1467 U32 Reserved2; /*0x04 */ 1468 U32 ImageOffset; /*0x08 */ 1469 U32 ImageSize; /*0x0C */ 1470 } MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE, 1471 Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t; 1472 1473 /*MPI v2.5 FWDownload Request message */ 1474 typedef struct _MPI25_FW_DOWNLOAD_REQUEST { 1475 U8 ImageType; /*0x00 */ 1476 U8 Reserved1; /*0x01 */ 1477 U8 ChainOffset; /*0x02 */ 1478 U8 Function; /*0x03 */ 1479 U16 Reserved2; /*0x04 */ 1480 U8 Reserved3; /*0x06 */ 1481 U8 MsgFlags; /*0x07 */ 1482 U8 VP_ID; /*0x08 */ 1483 U8 VF_ID; /*0x09 */ 1484 U16 Reserved4; /*0x0A */ 1485 U32 TotalImageSize; /*0x0C */ 1486 U32 Reserved5; /*0x10 */ 1487 U32 Reserved6; /*0x14 */ 1488 U32 ImageOffset; /*0x18 */ 1489 U32 ImageSize; /*0x1C */ 1490 MPI25_SGE_IO_UNION SGL; /*0x20 */ 1491 } MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST, 1492 Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest; 1493 1494 /*FWDownload Reply message */ 1495 typedef struct _MPI2_FW_DOWNLOAD_REPLY { 1496 U8 ImageType; /*0x00 */ 1497 U8 Reserved1; /*0x01 */ 1498 U8 MsgLength; /*0x02 */ 1499 U8 Function; /*0x03 */ 1500 U16 Reserved2; /*0x04 */ 1501 U8 Reserved3; /*0x06 */ 1502 U8 MsgFlags; /*0x07 */ 1503 U8 VP_ID; /*0x08 */ 1504 U8 VF_ID; /*0x09 */ 1505 U16 Reserved4; /*0x0A */ 1506 U16 Reserved5; /*0x0C */ 1507 U16 IOCStatus; /*0x0E */ 1508 U32 IOCLogInfo; /*0x10 */ 1509 } MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY, 1510 Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t; 1511 1512 /**************************************************************************** 1513 * FWUpload message 1514 ****************************************************************************/ 1515 1516 /*MPI v2.0 FWUpload Request message */ 1517 typedef struct _MPI2_FW_UPLOAD_REQUEST { 1518 U8 ImageType; /*0x00 */ 1519 U8 Reserved1; /*0x01 */ 1520 U8 ChainOffset; /*0x02 */ 1521 U8 Function; /*0x03 */ 1522 U16 Reserved2; /*0x04 */ 1523 U8 Reserved3; /*0x06 */ 1524 U8 MsgFlags; /*0x07 */ 1525 U8 VP_ID; /*0x08 */ 1526 U8 VF_ID; /*0x09 */ 1527 U16 Reserved4; /*0x0A */ 1528 U32 Reserved5; /*0x0C */ 1529 U32 Reserved6; /*0x10 */ 1530 MPI2_MPI_SGE_UNION SGL; /*0x14 */ 1531 } MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST, 1532 Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t; 1533 1534 #define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) 1535 #define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) 1536 #define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) 1537 #define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) 1538 #define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) 1539 #define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) 1540 #define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) 1541 #define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) 1542 #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) 1543 #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) 1544 #define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) 1545 #define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) 1546 #define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) 1547 #define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) 1548 #define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) 1549 #define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) 1550 #define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) 1551 #define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) 1552 1553 1554 /*MPI v2.0 FWUpload TransactionContext Element */ 1555 typedef struct _MPI2_FW_UPLOAD_TCSGE { 1556 U8 Reserved1; /*0x00 */ 1557 U8 ContextSize; /*0x01 */ 1558 U8 DetailsLength; /*0x02 */ 1559 U8 Flags; /*0x03 */ 1560 U32 Reserved2; /*0x04 */ 1561 U32 ImageOffset; /*0x08 */ 1562 U32 ImageSize; /*0x0C */ 1563 } MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE, 1564 Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t; 1565 1566 /*MPI v2.5 FWUpload Request message */ 1567 typedef struct _MPI25_FW_UPLOAD_REQUEST { 1568 U8 ImageType; /*0x00 */ 1569 U8 Reserved1; /*0x01 */ 1570 U8 ChainOffset; /*0x02 */ 1571 U8 Function; /*0x03 */ 1572 U16 Reserved2; /*0x04 */ 1573 U8 Reserved3; /*0x06 */ 1574 U8 MsgFlags; /*0x07 */ 1575 U8 VP_ID; /*0x08 */ 1576 U8 VF_ID; /*0x09 */ 1577 U16 Reserved4; /*0x0A */ 1578 U32 Reserved5; /*0x0C */ 1579 U32 Reserved6; /*0x10 */ 1580 U32 Reserved7; /*0x14 */ 1581 U32 ImageOffset; /*0x18 */ 1582 U32 ImageSize; /*0x1C */ 1583 MPI25_SGE_IO_UNION SGL; /*0x20 */ 1584 } MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST, 1585 Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t; 1586 1587 /*FWUpload Reply message */ 1588 typedef struct _MPI2_FW_UPLOAD_REPLY { 1589 U8 ImageType; /*0x00 */ 1590 U8 Reserved1; /*0x01 */ 1591 U8 MsgLength; /*0x02 */ 1592 U8 Function; /*0x03 */ 1593 U16 Reserved2; /*0x04 */ 1594 U8 Reserved3; /*0x06 */ 1595 U8 MsgFlags; /*0x07 */ 1596 U8 VP_ID; /*0x08 */ 1597 U8 VF_ID; /*0x09 */ 1598 U16 Reserved4; /*0x0A */ 1599 U16 Reserved5; /*0x0C */ 1600 U16 IOCStatus; /*0x0E */ 1601 U32 IOCLogInfo; /*0x10 */ 1602 U32 ActualImageSize; /*0x14 */ 1603 } MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY, 1604 Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t; 1605 1606 1607 /**************************************************************************** 1608 * PowerManagementControl message 1609 ****************************************************************************/ 1610 1611 /*PowerManagementControl Request message */ 1612 typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST { 1613 U8 Feature; /*0x00 */ 1614 U8 Reserved1; /*0x01 */ 1615 U8 ChainOffset; /*0x02 */ 1616 U8 Function; /*0x03 */ 1617 U16 Reserved2; /*0x04 */ 1618 U8 Reserved3; /*0x06 */ 1619 U8 MsgFlags; /*0x07 */ 1620 U8 VP_ID; /*0x08 */ 1621 U8 VF_ID; /*0x09 */ 1622 U16 Reserved4; /*0x0A */ 1623 U8 Parameter1; /*0x0C */ 1624 U8 Parameter2; /*0x0D */ 1625 U8 Parameter3; /*0x0E */ 1626 U8 Parameter4; /*0x0F */ 1627 U32 Reserved5; /*0x10 */ 1628 U32 Reserved6; /*0x14 */ 1629 } MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST, 1630 Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t; 1631 1632 /*defines for the Feature field */ 1633 #define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01) 1634 #define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02) 1635 #define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */ 1636 #define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04) 1637 #define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) 1638 #define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80) 1639 #define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF) 1640 1641 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */ 1642 /*Parameter1 contains a PHY number */ 1643 /*Parameter2 indicates power condition action using these defines */ 1644 #define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01) 1645 #define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02) 1646 #define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03) 1647 /*Parameter3 and Parameter4 are reserved */ 1648 1649 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION 1650 * Feature */ 1651 /*Parameter1 contains SAS port width modulation group number */ 1652 /*Parameter2 indicates IOC action using these defines */ 1653 #define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01) 1654 #define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02) 1655 #define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03) 1656 /*Parameter3 indicates desired modulation level using these defines */ 1657 #define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00) 1658 #define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01) 1659 #define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02) 1660 #define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03) 1661 /*Parameter4 is reserved */ 1662 1663 /*this next set (_PCIE_LINK) is obsolete */ 1664 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */ 1665 /*Parameter1 indicates desired PCIe link speed using these defines */ 1666 #define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */ 1667 #define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */ 1668 #define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */ 1669 /*Parameter2 indicates desired PCIe link width using these defines */ 1670 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */ 1671 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */ 1672 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */ 1673 #define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */ 1674 /*Parameter3 and Parameter4 are reserved */ 1675 1676 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */ 1677 /*Parameter1 indicates desired IOC hardware clock speed using these defines */ 1678 #define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01) 1679 #define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02) 1680 #define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04) 1681 #define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08) 1682 /*Parameter2, Parameter3, and Parameter4 are reserved */ 1683 1684 /*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/ 1685 /*Parameter1 indicates host action regarding global power management mode */ 1686 #define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01) 1687 #define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02) 1688 #define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03) 1689 /*Parameter2 indicates the requested global power management mode */ 1690 #define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01) 1691 #define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08) 1692 #define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40) 1693 /*Parameter3 and Parameter4 are reserved */ 1694 1695 /*PowerManagementControl Reply message */ 1696 typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY { 1697 U8 Feature; /*0x00 */ 1698 U8 Reserved1; /*0x01 */ 1699 U8 MsgLength; /*0x02 */ 1700 U8 Function; /*0x03 */ 1701 U16 Reserved2; /*0x04 */ 1702 U8 Reserved3; /*0x06 */ 1703 U8 MsgFlags; /*0x07 */ 1704 U8 VP_ID; /*0x08 */ 1705 U8 VF_ID; /*0x09 */ 1706 U16 Reserved4; /*0x0A */ 1707 U16 Reserved5; /*0x0C */ 1708 U16 IOCStatus; /*0x0E */ 1709 U32 IOCLogInfo; /*0x10 */ 1710 } MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY, 1711 Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t; 1712 1713 /**************************************************************************** 1714 * IO Unit Control messages (MPI v2.6 and later only.) 1715 ****************************************************************************/ 1716 1717 /* IO Unit Control Request Message */ 1718 typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { 1719 U8 Operation; /* 0x00 */ 1720 U8 Reserved1; /* 0x01 */ 1721 U8 ChainOffset; /* 0x02 */ 1722 U8 Function; /* 0x03 */ 1723 U16 DevHandle; /* 0x04 */ 1724 U8 IOCParameter; /* 0x06 */ 1725 U8 MsgFlags; /* 0x07 */ 1726 U8 VP_ID; /* 0x08 */ 1727 U8 VF_ID; /* 0x09 */ 1728 U16 Reserved3; /* 0x0A */ 1729 U16 Reserved4; /* 0x0C */ 1730 U8 PhyNum; /* 0x0E */ 1731 U8 PrimFlags; /* 0x0F */ 1732 U32 Primitive; /* 0x10 */ 1733 U8 LookupMethod; /* 0x14 */ 1734 U8 Reserved5; /* 0x15 */ 1735 U16 SlotNumber; /* 0x16 */ 1736 U64 LookupAddress; /* 0x18 */ 1737 U32 IOCParameterValue; /* 0x20 */ 1738 U32 Reserved7; /* 0x24 */ 1739 U32 Reserved8; /* 0x28 */ 1740 } MPI26_IOUNIT_CONTROL_REQUEST, 1741 *PTR_MPI26_IOUNIT_CONTROL_REQUEST, 1742 Mpi26IoUnitControlRequest_t, 1743 *pMpi26IoUnitControlRequest_t; 1744 1745 /* values for the Operation field */ 1746 #define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02) 1747 #define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06) 1748 #define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07) 1749 #define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08) 1750 #define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09) 1751 #define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A) 1752 #define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B) 1753 #define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D) 1754 #define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E) 1755 #define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F) 1756 #define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10) 1757 #define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11) 1758 #define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12) 1759 #define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13) 1760 #define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14) 1761 #define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15) 1762 #define MPI26_CTRL_OP_SHUTDOWN (0x16) 1763 #define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) 1764 #define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) 1765 #define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) 1766 #define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) 1767 #define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) 1768 #define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) 1769 1770 /* values for the PrimFlags field */ 1771 #define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08) 1772 #define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02) 1773 #define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01) 1774 1775 /* values for the LookupMethod field */ 1776 #define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01) 1777 #define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02) 1778 #define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) 1779 1780 1781 /* IO Unit Control Reply Message */ 1782 typedef struct _MPI26_IOUNIT_CONTROL_REPLY { 1783 U8 Operation; /* 0x00 */ 1784 U8 Reserved1; /* 0x01 */ 1785 U8 MsgLength; /* 0x02 */ 1786 U8 Function; /* 0x03 */ 1787 U16 DevHandle; /* 0x04 */ 1788 U8 IOCParameter; /* 0x06 */ 1789 U8 MsgFlags; /* 0x07 */ 1790 U8 VP_ID; /* 0x08 */ 1791 U8 VF_ID; /* 0x09 */ 1792 U16 Reserved3; /* 0x0A */ 1793 U16 Reserved4; /* 0x0C */ 1794 U16 IOCStatus; /* 0x0E */ 1795 U32 IOCLogInfo; /* 0x10 */ 1796 } MPI26_IOUNIT_CONTROL_REPLY, 1797 *PTR_MPI26_IOUNIT_CONTROL_REPLY, 1798 Mpi26IoUnitControlReply_t, 1799 *pMpi26IoUnitControlReply_t; 1800 1801 1802 #endif 1803