1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * linux/arch/arm/mach-omap1/devices.c
4 *
5 * OMAP1 platform device setup/initialization
6 */
7
8 #include <linux/dma-mapping.h>
9 #include <linux/module.h>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/spi/spi.h>
14
15 #include <linux/platform_data/omap-wd-timer.h>
16 #include <linux/soc/ti/omap1-io.h>
17
18 #include <asm/mach/map.h>
19
20 #include "tc.h"
21 #include "mux.h"
22
23 #include "hardware.h"
24 #include "common.h"
25 #include "clock.h"
26 #include "mmc.h"
27 #include "sram.h"
28
29 #if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
30
31 #define OMAP_RTC_BASE 0xfffb4800
32
33 static struct resource rtc_resources[] = {
34 {
35 .start = OMAP_RTC_BASE,
36 .end = OMAP_RTC_BASE + 0x5f,
37 .flags = IORESOURCE_MEM,
38 },
39 {
40 .start = INT_RTC_TIMER,
41 .flags = IORESOURCE_IRQ,
42 },
43 {
44 .start = INT_RTC_ALARM,
45 .flags = IORESOURCE_IRQ,
46 },
47 };
48
49 static struct platform_device omap_rtc_device = {
50 .name = "omap_rtc",
51 .id = -1,
52 .num_resources = ARRAY_SIZE(rtc_resources),
53 .resource = rtc_resources,
54 };
55
omap_init_rtc(void)56 static void omap_init_rtc(void)
57 {
58 (void) platform_device_register(&omap_rtc_device);
59 }
60 #else
omap_init_rtc(void)61 static inline void omap_init_rtc(void) {}
62 #endif
63
64 /*-------------------------------------------------------------------------*/
65
66 #if IS_ENABLED(CONFIG_MMC_OMAP)
67
omap1_mmc_mux(struct omap_mmc_platform_data * mmc_controller,int controller_nr)68 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
69 int controller_nr)
70 {
71 if (controller_nr == 0) {
72 omap_cfg_reg(MMC_CMD);
73 omap_cfg_reg(MMC_CLK);
74 omap_cfg_reg(MMC_DAT0);
75
76 if (cpu_is_omap1710()) {
77 omap_cfg_reg(M15_1710_MMC_CLKI);
78 omap_cfg_reg(P19_1710_MMC_CMDDIR);
79 omap_cfg_reg(P20_1710_MMC_DATDIR0);
80 }
81 if (mmc_controller->slots[0].wires == 4) {
82 omap_cfg_reg(MMC_DAT1);
83 /* NOTE: DAT2 can be on W10 (here) or M15 */
84 if (!mmc_controller->slots[0].nomux)
85 omap_cfg_reg(MMC_DAT2);
86 omap_cfg_reg(MMC_DAT3);
87 }
88 }
89
90 /* Block 2 is on newer chips, and has many pinout options */
91 if (cpu_is_omap16xx() && controller_nr == 1) {
92 if (!mmc_controller->slots[1].nomux) {
93 omap_cfg_reg(Y8_1610_MMC2_CMD);
94 omap_cfg_reg(Y10_1610_MMC2_CLK);
95 omap_cfg_reg(R18_1610_MMC2_CLKIN);
96 omap_cfg_reg(W8_1610_MMC2_DAT0);
97 if (mmc_controller->slots[1].wires == 4) {
98 omap_cfg_reg(V8_1610_MMC2_DAT1);
99 omap_cfg_reg(W15_1610_MMC2_DAT2);
100 omap_cfg_reg(R10_1610_MMC2_DAT3);
101 }
102
103 /* These are needed for the level shifter */
104 omap_cfg_reg(V9_1610_MMC2_CMDDIR);
105 omap_cfg_reg(V5_1610_MMC2_DATDIR0);
106 omap_cfg_reg(W19_1610_MMC2_DATDIR1);
107 }
108
109 /* Feedback clock must be set on OMAP-1710 MMC2 */
110 if (cpu_is_omap1710())
111 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
112 MOD_CONF_CTRL_1);
113 }
114 }
115
116 #define OMAP_MMC_NR_RES 4
117
118 /*
119 * Register MMC devices.
120 */
omap_mmc_add(const char * name,int id,unsigned long base,unsigned long size,unsigned int irq,unsigned rx_req,unsigned tx_req,struct omap_mmc_platform_data * data)121 static int __init omap_mmc_add(const char *name, int id, unsigned long base,
122 unsigned long size, unsigned int irq,
123 unsigned rx_req, unsigned tx_req,
124 struct omap_mmc_platform_data *data)
125 {
126 struct platform_device *pdev;
127 struct resource res[OMAP_MMC_NR_RES];
128 int ret;
129
130 pdev = platform_device_alloc(name, id);
131 if (!pdev)
132 return -ENOMEM;
133
134 memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
135 res[0].start = base;
136 res[0].end = base + size - 1;
137 res[0].flags = IORESOURCE_MEM;
138 res[1].start = res[1].end = irq;
139 res[1].flags = IORESOURCE_IRQ;
140 res[2].start = rx_req;
141 res[2].name = "rx";
142 res[2].flags = IORESOURCE_DMA;
143 res[3].start = tx_req;
144 res[3].name = "tx";
145 res[3].flags = IORESOURCE_DMA;
146
147 if (cpu_is_omap15xx())
148 data->slots[0].features = MMC_OMAP15XX;
149 if (cpu_is_omap16xx())
150 data->slots[0].features = MMC_OMAP16XX;
151
152 ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
153 if (ret == 0)
154 ret = platform_device_add_data(pdev, data, sizeof(*data));
155 if (ret)
156 goto fail;
157
158 ret = platform_device_add(pdev);
159 if (ret)
160 goto fail;
161
162 /* return device handle to board setup code */
163 data->dev = &pdev->dev;
164 return 0;
165
166 fail:
167 platform_device_put(pdev);
168 return ret;
169 }
170
omap1_init_mmc(struct omap_mmc_platform_data ** mmc_data,int nr_controllers)171 void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
172 int nr_controllers)
173 {
174 int i;
175
176 for (i = 0; i < nr_controllers; i++) {
177 unsigned long base, size;
178 unsigned rx_req, tx_req;
179 unsigned int irq = 0;
180
181 if (!mmc_data[i])
182 continue;
183
184 omap1_mmc_mux(mmc_data[i], i);
185
186 switch (i) {
187 case 0:
188 base = OMAP1_MMC1_BASE;
189 irq = INT_MMC;
190 rx_req = 22;
191 tx_req = 21;
192 break;
193 case 1:
194 if (!cpu_is_omap16xx())
195 return;
196 base = OMAP1_MMC2_BASE;
197 irq = INT_1610_MMC2;
198 rx_req = 55;
199 tx_req = 54;
200 break;
201 default:
202 continue;
203 }
204 size = OMAP1_MMC_SIZE;
205
206 omap_mmc_add("mmci-omap", i, base, size, irq,
207 rx_req, tx_req, mmc_data[i]);
208 }
209 }
210
211 #endif
212
213 /*-------------------------------------------------------------------------*/
214
215 /* Numbering for the SPI-capable controllers when used for SPI:
216 * spi = 1
217 * uwire = 2
218 * mmc1..2 = 3..4
219 * mcbsp1..3 = 5..7
220 */
221
222 #if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
223
224 #define OMAP_UWIRE_BASE 0xfffb3000
225
226 static struct resource uwire_resources[] = {
227 {
228 .start = OMAP_UWIRE_BASE,
229 .end = OMAP_UWIRE_BASE + 0x20,
230 .flags = IORESOURCE_MEM,
231 },
232 };
233
234 static struct platform_device omap_uwire_device = {
235 .name = "omap_uwire",
236 .id = -1,
237 .num_resources = ARRAY_SIZE(uwire_resources),
238 .resource = uwire_resources,
239 };
240
omap_init_uwire(void)241 static void omap_init_uwire(void)
242 {
243 /* FIXME define and use a boot tag; not all boards will be hooking
244 * up devices to the microwire controller, and multi-board configs
245 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
246 */
247
248 /* board-specific code must configure chipselects (only a few
249 * are normally used) and SCLK/SDI/SDO (each has two choices).
250 */
251 (void) platform_device_register(&omap_uwire_device);
252 }
253 #else
omap_init_uwire(void)254 static inline void omap_init_uwire(void) {}
255 #endif
256
257
258 #define OMAP1_RNG_BASE 0xfffe5000
259
260 static struct resource omap1_rng_resources[] = {
261 {
262 .start = OMAP1_RNG_BASE,
263 .end = OMAP1_RNG_BASE + 0x4f,
264 .flags = IORESOURCE_MEM,
265 },
266 };
267
268 static struct platform_device omap1_rng_device = {
269 .name = "omap_rng",
270 .id = -1,
271 .num_resources = ARRAY_SIZE(omap1_rng_resources),
272 .resource = omap1_rng_resources,
273 };
274
omap1_init_rng(void)275 static void omap1_init_rng(void)
276 {
277 if (!cpu_is_omap16xx())
278 return;
279
280 (void) platform_device_register(&omap1_rng_device);
281 }
282
283 /*-------------------------------------------------------------------------*/
284
285 /*
286 * This gets called after board-specific INIT_MACHINE, and initializes most
287 * on-chip peripherals accessible on this board (except for few like USB):
288 *
289 * (a) Does any "standard config" pin muxing needed. Board-specific
290 * code will have muxed GPIO pins and done "nonstandard" setup;
291 * that code could live in the boot loader.
292 * (b) Populating board-specific platform_data with the data drivers
293 * rely on to handle wiring variations.
294 * (c) Creating platform devices as meaningful on this board and
295 * with this kernel configuration.
296 *
297 * Claiming GPIOs, and setting their direction and initial values, is the
298 * responsibility of the device drivers. So is responding to probe().
299 *
300 * Board-specific knowledge like creating devices or pin setup is to be
301 * kept out of drivers as much as possible. In particular, pin setup
302 * may be handled by the boot loader, and drivers should expect it will
303 * normally have been done by the time they're probed.
304 */
omap1_init_devices(void)305 static int __init omap1_init_devices(void)
306 {
307 if (!cpu_class_is_omap1())
308 return -ENODEV;
309
310 omap1_sram_init();
311 omap1_clk_late_init();
312
313 /* please keep these calls, and their implementations above,
314 * in alphabetical order so they're easier to sort through.
315 */
316
317 omap_init_rtc();
318 omap_init_uwire();
319 omap1_init_rng();
320
321 return 0;
322 }
323 arch_initcall(omap1_init_devices);
324
325 #if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
326
327 static struct resource wdt_resources[] = {
328 {
329 .start = 0xfffeb000,
330 .end = 0xfffeb07F,
331 .flags = IORESOURCE_MEM,
332 },
333 };
334
335 static struct platform_device omap_wdt_device = {
336 .name = "omap_wdt",
337 .id = -1,
338 .num_resources = ARRAY_SIZE(wdt_resources),
339 .resource = wdt_resources,
340 };
341
omap_init_wdt(void)342 static int __init omap_init_wdt(void)
343 {
344 struct omap_wd_timer_platform_data pdata;
345 int ret;
346
347 if (!cpu_is_omap16xx())
348 return -ENODEV;
349
350 pdata.read_reset_sources = omap1_get_reset_sources;
351
352 ret = platform_device_register(&omap_wdt_device);
353 if (!ret) {
354 ret = platform_device_add_data(&omap_wdt_device, &pdata,
355 sizeof(pdata));
356 if (ret)
357 platform_device_del(&omap_wdt_device);
358 }
359
360 return ret;
361 }
362 subsys_initcall(omap_init_wdt);
363 #endif
364