1 // SPDX-License-Identifier: GPL-1.0+
2 /*
3 * OHCI HCD (Host Controller Driver) for USB.
4 *
5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
6 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
7 * (C) Copyright 2002 Hewlett-Packard Company
8 *
9 * SA1111 Bus Glue
10 *
11 * Written by Christopher Hoover <ch@hpl.hp.com>
12 * Based on fragments of previous driver by Russell King et al.
13 *
14 * This file is licenced under the GPL.
15 */
16
17 #include <asm/mach-types.h>
18 #include <asm/hardware/sa1111.h>
19
20 #ifndef CONFIG_SA1111
21 #error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined."
22 #endif
23
24 #define USB_STATUS 0x0118
25 #define USB_RESET 0x011c
26 #define USB_IRQTEST 0x0120
27
28 #define USB_RESET_FORCEIFRESET (1 << 0)
29 #define USB_RESET_FORCEHCRESET (1 << 1)
30 #define USB_RESET_CLKGENRESET (1 << 2)
31 #define USB_RESET_SIMSCALEDOWN (1 << 3)
32 #define USB_RESET_USBINTTEST (1 << 4)
33 #define USB_RESET_SLEEPSTBYEN (1 << 5)
34 #define USB_RESET_PWRSENSELOW (1 << 6)
35 #define USB_RESET_PWRCTRLLOW (1 << 7)
36
37 #define USB_STATUS_IRQHCIRMTWKUP (1 << 7)
38 #define USB_STATUS_IRQHCIBUFFACC (1 << 8)
39 #define USB_STATUS_NIRQHCIM (1 << 9)
40 #define USB_STATUS_NHCIMFCLR (1 << 10)
41 #define USB_STATUS_USBPWRSENSE (1 << 11)
42
43 #if 0
44 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
45 {
46 unsigned long status = readl_relaxed(hcd->regs + USB_STATUS);
47
48 printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
49 ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
50 ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
51 ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
52 ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
53 ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
54 }
55 #endif
56
ohci_sa1111_reset(struct usb_hcd * hcd)57 static int ohci_sa1111_reset(struct usb_hcd *hcd)
58 {
59 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
60
61 ohci_hcd_init(ohci);
62 return ohci_init(ohci);
63 }
64
ohci_sa1111_start(struct usb_hcd * hcd)65 static int ohci_sa1111_start(struct usb_hcd *hcd)
66 {
67 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
68 int ret;
69
70 ret = ohci_run(ohci);
71 if (ret < 0) {
72 ohci_err(ohci, "can't start\n");
73 ohci_stop(hcd);
74 }
75 return ret;
76 }
77
78 static const struct hc_driver ohci_sa1111_hc_driver = {
79 .description = hcd_name,
80 .product_desc = "SA-1111 OHCI",
81 .hcd_priv_size = sizeof(struct ohci_hcd),
82
83 /*
84 * generic hardware linkage
85 */
86 .irq = ohci_irq,
87 .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY,
88
89 /*
90 * basic lifecycle operations
91 */
92 .reset = ohci_sa1111_reset,
93 .start = ohci_sa1111_start,
94 .stop = ohci_stop,
95 .shutdown = ohci_shutdown,
96
97 /*
98 * managing i/o requests and associated device resources
99 */
100 .urb_enqueue = ohci_urb_enqueue,
101 .urb_dequeue = ohci_urb_dequeue,
102 .endpoint_disable = ohci_endpoint_disable,
103
104 /*
105 * scheduling support
106 */
107 .get_frame_number = ohci_get_frame,
108
109 /*
110 * root hub support
111 */
112 .hub_status_data = ohci_hub_status_data,
113 .hub_control = ohci_hub_control,
114 #ifdef CONFIG_PM
115 .bus_suspend = ohci_bus_suspend,
116 .bus_resume = ohci_bus_resume,
117 #endif
118 .start_port_reset = ohci_start_port_reset,
119 };
120
sa1111_start_hc(struct sa1111_dev * dev)121 static int sa1111_start_hc(struct sa1111_dev *dev)
122 {
123 unsigned int usb_rst = 0;
124 int ret;
125
126 dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
127
128 if (machine_is_assabet())
129 usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
130
131 /*
132 * Configure the power sense and control lines. Place the USB
133 * host controller in reset.
134 */
135 writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
136 dev->mapbase + USB_RESET);
137
138 /*
139 * Now, carefully enable the USB clock, and take
140 * the USB host controller out of reset.
141 */
142 ret = sa1111_enable_device(dev);
143 if (ret == 0) {
144 udelay(11);
145 writel_relaxed(usb_rst, dev->mapbase + USB_RESET);
146 }
147
148 return ret;
149 }
150
sa1111_stop_hc(struct sa1111_dev * dev)151 static void sa1111_stop_hc(struct sa1111_dev *dev)
152 {
153 unsigned int usb_rst;
154
155 dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n");
156
157 /*
158 * Put the USB host controller into reset.
159 */
160 usb_rst = readl_relaxed(dev->mapbase + USB_RESET);
161 writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
162 dev->mapbase + USB_RESET);
163
164 /*
165 * Stop the USB clock.
166 */
167 sa1111_disable_device(dev);
168 }
169
170 /**
171 * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs
172 *
173 * Allocates basic resources for this USB host controller, and
174 * then invokes the start() method for the HCD associated with it.
175 */
ohci_hcd_sa1111_probe(struct sa1111_dev * dev)176 static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
177 {
178 struct usb_hcd *hcd;
179 int ret, irq;
180
181 if (usb_disabled())
182 return -ENODEV;
183
184 /*
185 * We don't call dma_set_mask_and_coherent() here because the
186 * DMA mask has already been appropraitely setup by the core
187 * SA-1111 bus code (which includes bug workarounds.)
188 */
189
190 hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111");
191 if (!hcd)
192 return -ENOMEM;
193
194 hcd->rsrc_start = dev->res.start;
195 hcd->rsrc_len = resource_size(&dev->res);
196
197 irq = sa1111_get_irq(dev, 1);
198 if (irq <= 0) {
199 ret = irq ? : -ENXIO;
200 goto err1;
201 }
202
203 /*
204 * According to the "Intel StrongARM SA-1111 Microprocessor Companion
205 * Chip Specification Update" (June 2000), erratum #7, there is a
206 * significant bug in the SA1111 SDRAM shared memory controller. If
207 * an access to a region of memory above 1MB relative to the bank base,
208 * it is important that address bit 10 _NOT_ be asserted. Depending
209 * on the configuration of the RAM, bit 10 may correspond to one
210 * of several different (processor-relative) address bits.
211 *
212 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
213 * User's Guide" mentions that jumpers R51 and R52 control the
214 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
215 * SDRAM bank 1 on Neponset). The default configuration selects
216 * Assabet, so any address in bank 1 is necessarily invalid.
217 *
218 * As a workaround, use a bounce buffer in addressable memory
219 * as local_mem, relying on ZONE_DMA to provide an area that
220 * fits within the above constraints.
221 *
222 * SZ_64K is an estimate for what size this might need.
223 */
224 ret = usb_hcd_setup_local_mem(hcd, 0, 0, SZ_64K);
225 if (ret)
226 goto err1;
227
228 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
229 dev_dbg(&dev->dev, "request_mem_region failed\n");
230 ret = -EBUSY;
231 goto err1;
232 }
233
234 hcd->regs = dev->mapbase;
235
236 ret = sa1111_start_hc(dev);
237 if (ret)
238 goto err2;
239
240 ret = usb_add_hcd(hcd, irq, 0);
241 if (ret == 0) {
242 device_wakeup_enable(hcd->self.controller);
243 return ret;
244 }
245
246 sa1111_stop_hc(dev);
247 err2:
248 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
249 err1:
250 usb_put_hcd(hcd);
251 return ret;
252 }
253
254 /**
255 * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
256 * @dev: USB Host Controller being removed
257 *
258 * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking
259 * the HCD's stop() method.
260 */
ohci_hcd_sa1111_remove(struct sa1111_dev * dev)261 static void ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
262 {
263 struct usb_hcd *hcd = sa1111_get_drvdata(dev);
264
265 usb_remove_hcd(hcd);
266 sa1111_stop_hc(dev);
267 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
268 usb_put_hcd(hcd);
269 }
270
ohci_hcd_sa1111_shutdown(struct device * _dev)271 static void ohci_hcd_sa1111_shutdown(struct device *_dev)
272 {
273 struct sa1111_dev *dev = to_sa1111_device(_dev);
274 struct usb_hcd *hcd = sa1111_get_drvdata(dev);
275
276 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
277 hcd->driver->shutdown(hcd);
278 sa1111_stop_hc(dev);
279 }
280 }
281
282 static struct sa1111_driver ohci_hcd_sa1111_driver = {
283 .drv = {
284 .name = "sa1111-ohci",
285 .owner = THIS_MODULE,
286 .shutdown = ohci_hcd_sa1111_shutdown,
287 },
288 .devid = SA1111_DEVID_USB,
289 .probe = ohci_hcd_sa1111_probe,
290 .remove = ohci_hcd_sa1111_remove,
291 };
292