1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
4
5 Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
6 Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
7
8
9 References:
10 http://products.zarlink.com/product_profiles/MT312.htm
11 http://products.zarlink.com/product_profiles/SL1935.htm
12 */
13
14 #include <linux/delay.h>
15 #include <linux/errno.h>
16 #include <linux/init.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/slab.h>
21
22 #include <media/dvb_frontend.h>
23 #include "mt312_priv.h"
24 #include "mt312.h"
25
26 /* Max transfer size done by I2C transfer functions */
27 #define MAX_XFER_SIZE 64
28
29 struct mt312_state {
30 struct i2c_adapter *i2c;
31 /* configuration settings */
32 const struct mt312_config *config;
33 struct dvb_frontend frontend;
34
35 u8 id;
36 unsigned long xtal;
37 u8 freq_mult;
38 };
39
40 static int debug;
41 #define dprintk(args...) \
42 do { \
43 if (debug) \
44 printk(KERN_DEBUG "mt312: " args); \
45 } while (0)
46
47 #define MT312_PLL_CLK 10000000UL /* 10 MHz */
48 #define MT312_PLL_CLK_10_111 10111000UL /* 10.111 MHz */
49
mt312_read(struct mt312_state * state,const enum mt312_reg_addr reg,u8 * buf,const size_t count)50 static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
51 u8 *buf, const size_t count)
52 {
53 int ret;
54 struct i2c_msg msg[2];
55 u8 regbuf[1] = { reg };
56
57 msg[0].addr = state->config->demod_address;
58 msg[0].flags = 0;
59 msg[0].buf = regbuf;
60 msg[0].len = 1;
61 msg[1].addr = state->config->demod_address;
62 msg[1].flags = I2C_M_RD;
63 msg[1].buf = buf;
64 msg[1].len = count;
65
66 ret = i2c_transfer(state->i2c, msg, 2);
67
68 if (ret != 2) {
69 printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
70 return -EREMOTEIO;
71 }
72
73 if (debug) {
74 int i;
75 dprintk("R(%d):", reg & 0x7f);
76 for (i = 0; i < count; i++)
77 printk(KERN_CONT " %02x", buf[i]);
78 printk("\n");
79 }
80
81 return 0;
82 }
83
mt312_write(struct mt312_state * state,const enum mt312_reg_addr reg,const u8 * src,const size_t count)84 static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
85 const u8 *src, const size_t count)
86 {
87 int ret;
88 u8 buf[MAX_XFER_SIZE];
89 struct i2c_msg msg;
90
91 if (1 + count > sizeof(buf)) {
92 printk(KERN_WARNING
93 "mt312: write: len=%zu is too big!\n", count);
94 return -EINVAL;
95 }
96
97 if (debug) {
98 int i;
99 dprintk("W(%d):", reg & 0x7f);
100 for (i = 0; i < count; i++)
101 printk(KERN_CONT " %02x", src[i]);
102 printk("\n");
103 }
104
105 buf[0] = reg;
106 memcpy(&buf[1], src, count);
107
108 msg.addr = state->config->demod_address;
109 msg.flags = 0;
110 msg.buf = buf;
111 msg.len = count + 1;
112
113 ret = i2c_transfer(state->i2c, &msg, 1);
114
115 if (ret != 1) {
116 dprintk("%s: ret == %d\n", __func__, ret);
117 return -EREMOTEIO;
118 }
119
120 return 0;
121 }
122
mt312_readreg(struct mt312_state * state,const enum mt312_reg_addr reg,u8 * val)123 static inline int mt312_readreg(struct mt312_state *state,
124 const enum mt312_reg_addr reg, u8 *val)
125 {
126 return mt312_read(state, reg, val, 1);
127 }
128
mt312_writereg(struct mt312_state * state,const enum mt312_reg_addr reg,const u8 val)129 static inline int mt312_writereg(struct mt312_state *state,
130 const enum mt312_reg_addr reg, const u8 val)
131 {
132 u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
133
134
135 return mt312_write(state, reg, &tmp, 1);
136 }
137
mt312_reset(struct mt312_state * state,const u8 full)138 static int mt312_reset(struct mt312_state *state, const u8 full)
139 {
140 return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
141 }
142
mt312_get_inversion(struct mt312_state * state,enum fe_spectral_inversion * i)143 static int mt312_get_inversion(struct mt312_state *state,
144 enum fe_spectral_inversion *i)
145 {
146 int ret;
147 u8 vit_mode;
148
149 ret = mt312_readreg(state, VIT_MODE, &vit_mode);
150 if (ret < 0)
151 return ret;
152
153 if (vit_mode & 0x80) /* auto inversion was used */
154 *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
155
156 return 0;
157 }
158
mt312_get_symbol_rate(struct mt312_state * state,u32 * sr)159 static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr)
160 {
161 int ret;
162 u8 sym_rate_h;
163 u8 dec_ratio;
164 u16 sym_rat_op;
165 u16 monitor;
166 u8 buf[2];
167
168 ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h);
169 if (ret < 0)
170 return ret;
171
172 if (sym_rate_h & 0x80) {
173 /* symbol rate search was used */
174 ret = mt312_writereg(state, MON_CTRL, 0x03);
175 if (ret < 0)
176 return ret;
177
178 ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
179 if (ret < 0)
180 return ret;
181
182 monitor = (buf[0] << 8) | buf[1];
183
184 dprintk("sr(auto) = %u\n",
185 DIV_ROUND_CLOSEST(monitor * 15625, 4));
186 } else {
187 ret = mt312_writereg(state, MON_CTRL, 0x05);
188 if (ret < 0)
189 return ret;
190
191 ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
192 if (ret < 0)
193 return ret;
194
195 dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
196
197 ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf));
198 if (ret < 0)
199 return ret;
200
201 sym_rat_op = (buf[0] << 8) | buf[1];
202
203 dprintk("sym_rat_op=%d dec_ratio=%d\n",
204 sym_rat_op, dec_ratio);
205 dprintk("*sr(manual) = %lu\n",
206 (((state->xtal * 8192) / (sym_rat_op + 8192)) *
207 2) - dec_ratio);
208 }
209
210 return 0;
211 }
212
mt312_get_code_rate(struct mt312_state * state,enum fe_code_rate * cr)213 static int mt312_get_code_rate(struct mt312_state *state, enum fe_code_rate *cr)
214 {
215 const enum fe_code_rate fec_tab[8] =
216 { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
217 FEC_AUTO, FEC_AUTO };
218
219 int ret;
220 u8 fec_status;
221
222 ret = mt312_readreg(state, FEC_STATUS, &fec_status);
223 if (ret < 0)
224 return ret;
225
226 *cr = fec_tab[(fec_status >> 4) & 0x07];
227
228 return 0;
229 }
230
mt312_initfe(struct dvb_frontend * fe)231 static int mt312_initfe(struct dvb_frontend *fe)
232 {
233 struct mt312_state *state = fe->demodulator_priv;
234 int ret;
235 u8 buf[2];
236
237 /* wake up */
238 ret = mt312_writereg(state, CONFIG,
239 (state->freq_mult == 6 ? 0x88 : 0x8c));
240 if (ret < 0)
241 return ret;
242
243 /* wait at least 150 usec */
244 udelay(150);
245
246 /* full reset */
247 ret = mt312_reset(state, 1);
248 if (ret < 0)
249 return ret;
250
251 /* Per datasheet, write correct values. 09/28/03 ACCJr.
252 * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */
253 {
254 u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02,
255 0x01, 0x00, 0x00, 0x00 };
256
257 ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def));
258 if (ret < 0)
259 return ret;
260 }
261
262 switch (state->id) {
263 case ID_ZL10313:
264 /* enable ADC */
265 ret = mt312_writereg(state, GPP_CTRL, 0x80);
266 if (ret < 0)
267 return ret;
268
269 /* configure ZL10313 for optimal ADC performance */
270 buf[0] = 0x80;
271 buf[1] = 0xB0;
272 ret = mt312_write(state, HW_CTRL, buf, 2);
273 if (ret < 0)
274 return ret;
275
276 /* enable MPEG output and ADCs */
277 ret = mt312_writereg(state, HW_CTRL, 0x00);
278 if (ret < 0)
279 return ret;
280
281 ret = mt312_writereg(state, MPEG_CTRL, 0x00);
282 if (ret < 0)
283 return ret;
284
285 break;
286 }
287
288 /* SYS_CLK */
289 buf[0] = DIV_ROUND_CLOSEST(state->xtal * state->freq_mult * 2, 1000000);
290
291 /* DISEQC_RATIO */
292 buf[1] = DIV_ROUND_CLOSEST(state->xtal, 22000 * 4);
293
294 ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
295 if (ret < 0)
296 return ret;
297
298 ret = mt312_writereg(state, SNR_THS_HIGH, 0x32);
299 if (ret < 0)
300 return ret;
301
302 /* different MOCLK polarity */
303 switch (state->id) {
304 case ID_ZL10313:
305 buf[0] = 0x33;
306 break;
307 default:
308 buf[0] = 0x53;
309 break;
310 }
311
312 ret = mt312_writereg(state, OP_CTRL, buf[0]);
313 if (ret < 0)
314 return ret;
315
316 /* TS_SW_LIM */
317 buf[0] = 0x8c;
318 buf[1] = 0x98;
319
320 ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
321 if (ret < 0)
322 return ret;
323
324 ret = mt312_writereg(state, CS_SW_LIM, 0x69);
325 if (ret < 0)
326 return ret;
327
328 return 0;
329 }
330
mt312_send_master_cmd(struct dvb_frontend * fe,struct dvb_diseqc_master_cmd * c)331 static int mt312_send_master_cmd(struct dvb_frontend *fe,
332 struct dvb_diseqc_master_cmd *c)
333 {
334 struct mt312_state *state = fe->demodulator_priv;
335 int ret;
336 u8 diseqc_mode;
337
338 if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
339 return -EINVAL;
340
341 ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
342 if (ret < 0)
343 return ret;
344
345 ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len);
346 if (ret < 0)
347 return ret;
348
349 ret = mt312_writereg(state, DISEQC_MODE,
350 (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
351 | 0x04);
352 if (ret < 0)
353 return ret;
354
355 /* is there a better way to wait for message to be transmitted */
356 msleep(100);
357
358 /* set DISEQC_MODE[2:0] to zero if a return message is expected */
359 if (c->msg[0] & 0x02) {
360 ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
361 if (ret < 0)
362 return ret;
363 }
364
365 return 0;
366 }
367
mt312_send_burst(struct dvb_frontend * fe,const enum fe_sec_mini_cmd c)368 static int mt312_send_burst(struct dvb_frontend *fe,
369 const enum fe_sec_mini_cmd c)
370 {
371 struct mt312_state *state = fe->demodulator_priv;
372 const u8 mini_tab[2] = { 0x02, 0x03 };
373
374 int ret;
375 u8 diseqc_mode;
376
377 if (c > SEC_MINI_B)
378 return -EINVAL;
379
380 ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
381 if (ret < 0)
382 return ret;
383
384 ret = mt312_writereg(state, DISEQC_MODE,
385 (diseqc_mode & 0x40) | mini_tab[c]);
386 if (ret < 0)
387 return ret;
388
389 return 0;
390 }
391
mt312_set_tone(struct dvb_frontend * fe,const enum fe_sec_tone_mode t)392 static int mt312_set_tone(struct dvb_frontend *fe,
393 const enum fe_sec_tone_mode t)
394 {
395 struct mt312_state *state = fe->demodulator_priv;
396 const u8 tone_tab[2] = { 0x01, 0x00 };
397
398 int ret;
399 u8 diseqc_mode;
400
401 if (t > SEC_TONE_OFF)
402 return -EINVAL;
403
404 ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
405 if (ret < 0)
406 return ret;
407
408 ret = mt312_writereg(state, DISEQC_MODE,
409 (diseqc_mode & 0x40) | tone_tab[t]);
410 if (ret < 0)
411 return ret;
412
413 return 0;
414 }
415
mt312_set_voltage(struct dvb_frontend * fe,const enum fe_sec_voltage v)416 static int mt312_set_voltage(struct dvb_frontend *fe,
417 const enum fe_sec_voltage v)
418 {
419 struct mt312_state *state = fe->demodulator_priv;
420 const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
421 u8 val;
422
423 if (v > SEC_VOLTAGE_OFF)
424 return -EINVAL;
425
426 val = volt_tab[v];
427 if (state->config->voltage_inverted)
428 val ^= 0x40;
429
430 return mt312_writereg(state, DISEQC_MODE, val);
431 }
432
mt312_read_status(struct dvb_frontend * fe,enum fe_status * s)433 static int mt312_read_status(struct dvb_frontend *fe, enum fe_status *s)
434 {
435 struct mt312_state *state = fe->demodulator_priv;
436 int ret;
437 u8 status[3];
438
439 *s = 0;
440
441 ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status));
442 if (ret < 0)
443 return ret;
444
445 dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n",
446 status[0], status[1], status[2]);
447
448 if (status[0] & 0xc0)
449 *s |= FE_HAS_SIGNAL; /* signal noise ratio */
450 if (status[0] & 0x04)
451 *s |= FE_HAS_CARRIER; /* qpsk carrier lock */
452 if (status[2] & 0x02)
453 *s |= FE_HAS_VITERBI; /* viterbi lock */
454 if (status[2] & 0x04)
455 *s |= FE_HAS_SYNC; /* byte align lock */
456 if (status[0] & 0x01)
457 *s |= FE_HAS_LOCK; /* qpsk lock */
458
459 return 0;
460 }
461
mt312_read_ber(struct dvb_frontend * fe,u32 * ber)462 static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber)
463 {
464 struct mt312_state *state = fe->demodulator_priv;
465 int ret;
466 u8 buf[3];
467
468 ret = mt312_read(state, RS_BERCNT_H, buf, 3);
469 if (ret < 0)
470 return ret;
471
472 *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
473
474 return 0;
475 }
476
mt312_read_signal_strength(struct dvb_frontend * fe,u16 * signal_strength)477 static int mt312_read_signal_strength(struct dvb_frontend *fe,
478 u16 *signal_strength)
479 {
480 struct mt312_state *state = fe->demodulator_priv;
481 int ret;
482 u8 buf[3];
483 u16 agc;
484 s16 err_db;
485
486 ret = mt312_read(state, AGC_H, buf, sizeof(buf));
487 if (ret < 0)
488 return ret;
489
490 agc = (buf[0] << 6) | (buf[1] >> 2);
491 err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
492
493 *signal_strength = agc;
494
495 dprintk("agc=%08x err_db=%hd\n", agc, err_db);
496
497 return 0;
498 }
499
mt312_read_snr(struct dvb_frontend * fe,u16 * snr)500 static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr)
501 {
502 struct mt312_state *state = fe->demodulator_priv;
503 int ret;
504 u8 buf[2];
505
506 ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
507 if (ret < 0)
508 return ret;
509
510 *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
511
512 return 0;
513 }
514
mt312_read_ucblocks(struct dvb_frontend * fe,u32 * ubc)515 static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
516 {
517 struct mt312_state *state = fe->demodulator_priv;
518 int ret;
519 u8 buf[2];
520
521 ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
522 if (ret < 0)
523 return ret;
524
525 *ubc = (buf[0] << 8) | buf[1];
526
527 return 0;
528 }
529
mt312_set_frontend(struct dvb_frontend * fe)530 static int mt312_set_frontend(struct dvb_frontend *fe)
531 {
532 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
533 struct mt312_state *state = fe->demodulator_priv;
534 int ret;
535 u8 buf[5], config_val;
536 u16 sr;
537
538 const u8 fec_tab[10] =
539 { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
540 const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
541
542 dprintk("%s: Freq %d\n", __func__, p->frequency);
543
544 if ((p->frequency < fe->ops.info.frequency_min_hz / kHz)
545 || (p->frequency > fe->ops.info.frequency_max_hz / kHz))
546 return -EINVAL;
547
548 if (((int)p->inversion < INVERSION_OFF)
549 || (p->inversion > INVERSION_ON))
550 return -EINVAL;
551
552 if ((p->symbol_rate < fe->ops.info.symbol_rate_min)
553 || (p->symbol_rate > fe->ops.info.symbol_rate_max))
554 return -EINVAL;
555
556 if (((int)p->fec_inner < FEC_NONE)
557 || (p->fec_inner > FEC_AUTO))
558 return -EINVAL;
559
560 if ((p->fec_inner == FEC_4_5)
561 || (p->fec_inner == FEC_8_9))
562 return -EINVAL;
563
564 switch (state->id) {
565 case ID_VP310:
566 /* For now we will do this only for the VP310.
567 * It should be better for the mt312 as well,
568 * but tuning will be slower. ACCJr 09/29/03
569 */
570 ret = mt312_readreg(state, CONFIG, &config_val);
571 if (ret < 0)
572 return ret;
573 if (p->symbol_rate >= 30000000) {
574 /* Note that 30MS/s should use 90MHz */
575 if (state->freq_mult == 6) {
576 /* We are running 60MHz */
577 state->freq_mult = 9;
578 ret = mt312_initfe(fe);
579 if (ret < 0)
580 return ret;
581 }
582 } else {
583 if (state->freq_mult == 9) {
584 /* We are running 90MHz */
585 state->freq_mult = 6;
586 ret = mt312_initfe(fe);
587 if (ret < 0)
588 return ret;
589 }
590 }
591 break;
592
593 case ID_MT312:
594 case ID_ZL10313:
595 break;
596
597 default:
598 return -EINVAL;
599 }
600
601 if (fe->ops.tuner_ops.set_params) {
602 fe->ops.tuner_ops.set_params(fe);
603 if (fe->ops.i2c_gate_ctrl)
604 fe->ops.i2c_gate_ctrl(fe, 0);
605 }
606
607 /* sr = (u16)(sr * 256.0 / 1000000.0) */
608 sr = DIV_ROUND_CLOSEST(p->symbol_rate * 4, 15625);
609
610 /* SYM_RATE */
611 buf[0] = (sr >> 8) & 0x3f;
612 buf[1] = (sr >> 0) & 0xff;
613
614 /* VIT_MODE */
615 buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner];
616
617 /* QPSK_CTRL */
618 buf[3] = 0x40; /* swap I and Q before QPSK demodulation */
619
620 if (p->symbol_rate < 10000000)
621 buf[3] |= 0x04; /* use afc mode */
622
623 /* GO */
624 buf[4] = 0x01;
625
626 ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf));
627 if (ret < 0)
628 return ret;
629
630 ret = mt312_reset(state, 0);
631 if (ret < 0)
632 return ret;
633
634 return 0;
635 }
636
mt312_get_frontend(struct dvb_frontend * fe,struct dtv_frontend_properties * p)637 static int mt312_get_frontend(struct dvb_frontend *fe,
638 struct dtv_frontend_properties *p)
639 {
640 struct mt312_state *state = fe->demodulator_priv;
641 int ret;
642
643 ret = mt312_get_inversion(state, &p->inversion);
644 if (ret < 0)
645 return ret;
646
647 ret = mt312_get_symbol_rate(state, &p->symbol_rate);
648 if (ret < 0)
649 return ret;
650
651 ret = mt312_get_code_rate(state, &p->fec_inner);
652 if (ret < 0)
653 return ret;
654
655 return 0;
656 }
657
mt312_i2c_gate_ctrl(struct dvb_frontend * fe,int enable)658 static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
659 {
660 struct mt312_state *state = fe->demodulator_priv;
661
662 u8 val = 0x00;
663 int ret;
664
665 switch (state->id) {
666 case ID_ZL10313:
667 ret = mt312_readreg(state, GPP_CTRL, &val);
668 if (ret < 0)
669 goto error;
670
671 /* preserve this bit to not accidentally shutdown ADC */
672 val &= 0x80;
673 break;
674 }
675
676 if (enable)
677 val |= 0x40;
678 else
679 val &= ~0x40;
680
681 ret = mt312_writereg(state, GPP_CTRL, val);
682
683 error:
684 return ret;
685 }
686
mt312_sleep(struct dvb_frontend * fe)687 static int mt312_sleep(struct dvb_frontend *fe)
688 {
689 struct mt312_state *state = fe->demodulator_priv;
690 int ret;
691 u8 config;
692
693 /* reset all registers to defaults */
694 ret = mt312_reset(state, 1);
695 if (ret < 0)
696 return ret;
697
698 if (state->id == ID_ZL10313) {
699 /* reset ADC */
700 ret = mt312_writereg(state, GPP_CTRL, 0x00);
701 if (ret < 0)
702 return ret;
703
704 /* full shutdown of ADCs, mpeg bus tristated */
705 ret = mt312_writereg(state, HW_CTRL, 0x0d);
706 if (ret < 0)
707 return ret;
708 }
709
710 ret = mt312_readreg(state, CONFIG, &config);
711 if (ret < 0)
712 return ret;
713
714 /* enter standby */
715 ret = mt312_writereg(state, CONFIG, config & 0x7f);
716 if (ret < 0)
717 return ret;
718
719 return 0;
720 }
721
mt312_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * fesettings)722 static int mt312_get_tune_settings(struct dvb_frontend *fe,
723 struct dvb_frontend_tune_settings *fesettings)
724 {
725 fesettings->min_delay_ms = 50;
726 fesettings->step_size = 0;
727 fesettings->max_drift = 0;
728 return 0;
729 }
730
mt312_release(struct dvb_frontend * fe)731 static void mt312_release(struct dvb_frontend *fe)
732 {
733 struct mt312_state *state = fe->demodulator_priv;
734 kfree(state);
735 }
736
737 #define MT312_SYS_CLK 90000000UL /* 90 MHz */
738 static const struct dvb_frontend_ops mt312_ops = {
739 .delsys = { SYS_DVBS },
740 .info = {
741 .name = "Zarlink ???? DVB-S",
742 .frequency_min_hz = 950 * MHz,
743 .frequency_max_hz = 2150 * MHz,
744 /* FIXME: adjust freq to real used xtal */
745 .frequency_stepsize_hz = MT312_PLL_CLK / 128,
746 .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
747 .symbol_rate_max = MT312_SYS_CLK / 2,
748 .caps =
749 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
750 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
751 FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
752 FE_CAN_RECOVER
753 },
754
755 .release = mt312_release,
756
757 .init = mt312_initfe,
758 .sleep = mt312_sleep,
759 .i2c_gate_ctrl = mt312_i2c_gate_ctrl,
760
761 .set_frontend = mt312_set_frontend,
762 .get_frontend = mt312_get_frontend,
763 .get_tune_settings = mt312_get_tune_settings,
764
765 .read_status = mt312_read_status,
766 .read_ber = mt312_read_ber,
767 .read_signal_strength = mt312_read_signal_strength,
768 .read_snr = mt312_read_snr,
769 .read_ucblocks = mt312_read_ucblocks,
770
771 .diseqc_send_master_cmd = mt312_send_master_cmd,
772 .diseqc_send_burst = mt312_send_burst,
773 .set_tone = mt312_set_tone,
774 .set_voltage = mt312_set_voltage,
775 };
776
mt312_attach(const struct mt312_config * config,struct i2c_adapter * i2c)777 struct dvb_frontend *mt312_attach(const struct mt312_config *config,
778 struct i2c_adapter *i2c)
779 {
780 struct mt312_state *state = NULL;
781
782 /* allocate memory for the internal state */
783 state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
784 if (state == NULL)
785 goto error;
786
787 /* setup the state */
788 state->config = config;
789 state->i2c = i2c;
790
791 /* check if the demod is there */
792 if (mt312_readreg(state, ID, &state->id) < 0)
793 goto error;
794
795 /* create dvb_frontend */
796 memcpy(&state->frontend.ops, &mt312_ops,
797 sizeof(struct dvb_frontend_ops));
798 state->frontend.demodulator_priv = state;
799
800 switch (state->id) {
801 case ID_VP310:
802 strscpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S",
803 sizeof(state->frontend.ops.info.name));
804 state->xtal = MT312_PLL_CLK;
805 state->freq_mult = 9;
806 break;
807 case ID_MT312:
808 strscpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S",
809 sizeof(state->frontend.ops.info.name));
810 state->xtal = MT312_PLL_CLK;
811 state->freq_mult = 6;
812 break;
813 case ID_ZL10313:
814 strscpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S",
815 sizeof(state->frontend.ops.info.name));
816 state->xtal = MT312_PLL_CLK_10_111;
817 state->freq_mult = 9;
818 break;
819 default:
820 printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n");
821 goto error;
822 }
823
824 return &state->frontend;
825
826 error:
827 kfree(state);
828 return NULL;
829 }
830 EXPORT_SYMBOL_GPL(mt312_attach);
831
832 module_param(debug, int, 0644);
833 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
834
835 MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
836 MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
837 MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
838 MODULE_LICENSE("GPL");
839
840