1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * The driver for Freescale MPC512x LocalPlus Bus FIFO
4 * (called SCLPC in the Reference Manual).
5 *
6 * Copyright (C) 2013-2015 Alexander Popov <alex.popov@linux.com>.
7 */
8
9 #include <linux/interrupt.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/of_address.h>
14 #include <linux/of_irq.h>
15 #include <linux/platform_device.h>
16 #include <asm/mpc5121.h>
17 #include <asm/io.h>
18 #include <linux/spinlock.h>
19 #include <linux/slab.h>
20 #include <linux/dmaengine.h>
21 #include <linux/dma-direction.h>
22 #include <linux/dma-mapping.h>
23
24 #define DRV_NAME "mpc512x_lpbfifo"
25
26 struct cs_range {
27 u32 csnum;
28 u32 base; /* must be zero */
29 u32 addr;
30 u32 size;
31 };
32
33 static struct lpbfifo_data {
34 spinlock_t lock; /* for protecting lpbfifo_data */
35 phys_addr_t regs_phys;
36 resource_size_t regs_size;
37 struct mpc512x_lpbfifo __iomem *regs;
38 int irq;
39 struct cs_range *cs_ranges;
40 size_t cs_n;
41 struct dma_chan *chan;
42 struct mpc512x_lpbfifo_request *req;
43 dma_addr_t ram_bus_addr;
44 bool wait_lpbfifo_irq;
45 bool wait_lpbfifo_callback;
46 } lpbfifo;
47
48 /*
49 * A data transfer from RAM to some device on LPB is finished
50 * when both mpc512x_lpbfifo_irq() and mpc512x_lpbfifo_callback()
51 * have been called. We execute the callback registered in
52 * mpc512x_lpbfifo_request just after that.
53 * But for a data transfer from some device on LPB to RAM we don't enable
54 * LPBFIFO interrupt because clearing MPC512X_SCLPC_SUCCESS interrupt flag
55 * automatically disables LPBFIFO reading request to the DMA controller
56 * and the data transfer hangs. So the callback registered in
57 * mpc512x_lpbfifo_request is executed at the end of mpc512x_lpbfifo_callback().
58 */
59
60 /*
61 * mpc512x_lpbfifo_irq - IRQ handler for LPB FIFO
62 */
mpc512x_lpbfifo_irq(int irq,void * param)63 static irqreturn_t mpc512x_lpbfifo_irq(int irq, void *param)
64 {
65 struct device *dev = (struct device *)param;
66 struct mpc512x_lpbfifo_request *req = NULL;
67 unsigned long flags;
68 u32 status;
69
70 spin_lock_irqsave(&lpbfifo.lock, flags);
71
72 if (!lpbfifo.regs)
73 goto end;
74
75 req = lpbfifo.req;
76 if (!req || req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) {
77 dev_err(dev, "bogus LPBFIFO IRQ\n");
78 goto end;
79 }
80
81 status = in_be32(&lpbfifo.regs->status);
82 if (status != MPC512X_SCLPC_SUCCESS) {
83 dev_err(dev, "DMA transfer from RAM to peripheral failed\n");
84 out_be32(&lpbfifo.regs->enable,
85 MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
86 goto end;
87 }
88 /* Clear the interrupt flag */
89 out_be32(&lpbfifo.regs->status, MPC512X_SCLPC_SUCCESS);
90
91 lpbfifo.wait_lpbfifo_irq = false;
92
93 if (lpbfifo.wait_lpbfifo_callback)
94 goto end;
95
96 /* Transfer is finished, set the FIFO as idle */
97 lpbfifo.req = NULL;
98
99 spin_unlock_irqrestore(&lpbfifo.lock, flags);
100
101 if (req->callback)
102 req->callback(req);
103
104 return IRQ_HANDLED;
105
106 end:
107 spin_unlock_irqrestore(&lpbfifo.lock, flags);
108 return IRQ_HANDLED;
109 }
110
111 /*
112 * mpc512x_lpbfifo_callback is called by DMA driver when
113 * DMA transaction is finished.
114 */
mpc512x_lpbfifo_callback(void * param)115 static void mpc512x_lpbfifo_callback(void *param)
116 {
117 unsigned long flags;
118 struct mpc512x_lpbfifo_request *req = NULL;
119 enum dma_data_direction dir;
120
121 spin_lock_irqsave(&lpbfifo.lock, flags);
122
123 if (!lpbfifo.regs) {
124 spin_unlock_irqrestore(&lpbfifo.lock, flags);
125 return;
126 }
127
128 req = lpbfifo.req;
129 if (!req) {
130 pr_err("bogus LPBFIFO callback\n");
131 spin_unlock_irqrestore(&lpbfifo.lock, flags);
132 return;
133 }
134
135 /* Release the mapping */
136 if (req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
137 dir = DMA_TO_DEVICE;
138 else
139 dir = DMA_FROM_DEVICE;
140 dma_unmap_single(lpbfifo.chan->device->dev,
141 lpbfifo.ram_bus_addr, req->size, dir);
142
143 lpbfifo.wait_lpbfifo_callback = false;
144
145 if (!lpbfifo.wait_lpbfifo_irq) {
146 /* Transfer is finished, set the FIFO as idle */
147 lpbfifo.req = NULL;
148
149 spin_unlock_irqrestore(&lpbfifo.lock, flags);
150
151 if (req->callback)
152 req->callback(req);
153 } else {
154 spin_unlock_irqrestore(&lpbfifo.lock, flags);
155 }
156 }
157
mpc512x_lpbfifo_kick(void)158 static int mpc512x_lpbfifo_kick(void)
159 {
160 u32 bits;
161 bool no_incr = false;
162 u32 bpt = 32; /* max bytes per LPBFIFO transaction involving DMA */
163 u32 cs = 0;
164 size_t i;
165 struct dma_device *dma_dev = NULL;
166 struct scatterlist sg;
167 enum dma_data_direction dir;
168 struct dma_slave_config dma_conf = {};
169 struct dma_async_tx_descriptor *dma_tx = NULL;
170 dma_cookie_t cookie;
171 int ret;
172
173 /*
174 * 1. Fit the requirements:
175 * - the packet size must be a multiple of 4 since FIFO Data Word
176 * Register allows only full-word access according the Reference
177 * Manual;
178 * - the physical address of the device on LPB and the packet size
179 * must be aligned on BPT (bytes per transaction) or 8-bytes
180 * boundary according the Reference Manual;
181 * - but we choose DMA maxburst equal (or very close to) BPT to prevent
182 * DMA controller from overtaking FIFO and causing FIFO underflow
183 * error. So we force the packet size to be aligned on BPT boundary
184 * not to confuse DMA driver which requires the packet size to be
185 * aligned on maxburst boundary;
186 * - BPT should be set to the LPB device port size for operation with
187 * disabled auto-incrementing according Reference Manual.
188 */
189 if (lpbfifo.req->size == 0 || !IS_ALIGNED(lpbfifo.req->size, 4))
190 return -EINVAL;
191
192 if (lpbfifo.req->portsize != LPB_DEV_PORTSIZE_UNDEFINED) {
193 bpt = lpbfifo.req->portsize;
194 no_incr = true;
195 }
196
197 while (bpt > 1) {
198 if (IS_ALIGNED(lpbfifo.req->dev_phys_addr, min(bpt, 0x8u)) &&
199 IS_ALIGNED(lpbfifo.req->size, bpt)) {
200 break;
201 }
202
203 if (no_incr)
204 return -EINVAL;
205
206 bpt >>= 1;
207 }
208 dma_conf.dst_maxburst = max(bpt, 0x4u) / 4;
209 dma_conf.src_maxburst = max(bpt, 0x4u) / 4;
210
211 for (i = 0; i < lpbfifo.cs_n; i++) {
212 phys_addr_t cs_start = lpbfifo.cs_ranges[i].addr;
213 phys_addr_t cs_end = cs_start + lpbfifo.cs_ranges[i].size;
214 phys_addr_t access_start = lpbfifo.req->dev_phys_addr;
215 phys_addr_t access_end = access_start + lpbfifo.req->size;
216
217 if (access_start >= cs_start && access_end <= cs_end) {
218 cs = lpbfifo.cs_ranges[i].csnum;
219 break;
220 }
221 }
222 if (i == lpbfifo.cs_n)
223 return -EFAULT;
224
225 /* 2. Prepare DMA */
226 dma_dev = lpbfifo.chan->device;
227
228 if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) {
229 dir = DMA_TO_DEVICE;
230 dma_conf.direction = DMA_MEM_TO_DEV;
231 dma_conf.dst_addr = lpbfifo.regs_phys +
232 offsetof(struct mpc512x_lpbfifo, data_word);
233 } else {
234 dir = DMA_FROM_DEVICE;
235 dma_conf.direction = DMA_DEV_TO_MEM;
236 dma_conf.src_addr = lpbfifo.regs_phys +
237 offsetof(struct mpc512x_lpbfifo, data_word);
238 }
239 dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
240 dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
241
242 /* Make DMA channel work with LPB FIFO data register */
243 if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
244 ret = -EINVAL;
245 goto err_dma_prep;
246 }
247
248 sg_init_table(&sg, 1);
249
250 sg_dma_address(&sg) = dma_map_single(dma_dev->dev,
251 lpbfifo.req->ram_virt_addr, lpbfifo.req->size, dir);
252 if (dma_mapping_error(dma_dev->dev, sg_dma_address(&sg)))
253 return -EFAULT;
254
255 lpbfifo.ram_bus_addr = sg_dma_address(&sg); /* For freeing later */
256
257 sg_dma_len(&sg) = lpbfifo.req->size;
258
259 dma_tx = dmaengine_prep_slave_sg(lpbfifo.chan, &sg,
260 1, dma_conf.direction, 0);
261 if (!dma_tx) {
262 ret = -ENOSPC;
263 goto err_dma_prep;
264 }
265 dma_tx->callback = mpc512x_lpbfifo_callback;
266 dma_tx->callback_param = NULL;
267
268 /* 3. Prepare FIFO */
269 out_be32(&lpbfifo.regs->enable,
270 MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
271 out_be32(&lpbfifo.regs->enable, 0x0);
272
273 /*
274 * Configure the watermarks for write operation (RAM->DMA->FIFO->dev):
275 * - high watermark 7 words according the Reference Manual,
276 * - low watermark 512 bytes (half of the FIFO).
277 * These watermarks don't work for read operation since the
278 * MPC512X_SCLPC_FLUSH bit is set (according the Reference Manual).
279 */
280 out_be32(&lpbfifo.regs->fifo_ctrl, MPC512X_SCLPC_FIFO_CTRL(0x7));
281 out_be32(&lpbfifo.regs->fifo_alarm, MPC512X_SCLPC_FIFO_ALARM(0x200));
282
283 /*
284 * Start address is a physical address of the region which belongs
285 * to the device on the LocalPlus Bus
286 */
287 out_be32(&lpbfifo.regs->start_addr, lpbfifo.req->dev_phys_addr);
288
289 /*
290 * Configure chip select, transfer direction, address increment option
291 * and bytes per transaction option
292 */
293 bits = MPC512X_SCLPC_CS(cs);
294 if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_READ)
295 bits |= MPC512X_SCLPC_READ | MPC512X_SCLPC_FLUSH;
296 if (no_incr)
297 bits |= MPC512X_SCLPC_DAI;
298 bits |= MPC512X_SCLPC_BPT(bpt);
299 out_be32(&lpbfifo.regs->ctrl, bits);
300
301 /* Unmask irqs */
302 bits = MPC512X_SCLPC_ENABLE | MPC512X_SCLPC_ABORT_INT_ENABLE;
303 if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
304 bits |= MPC512X_SCLPC_NORM_INT_ENABLE;
305 else
306 lpbfifo.wait_lpbfifo_irq = false;
307
308 out_be32(&lpbfifo.regs->enable, bits);
309
310 /* 4. Set packet size and kick FIFO off */
311 bits = lpbfifo.req->size | MPC512X_SCLPC_START;
312 out_be32(&lpbfifo.regs->pkt_size, bits);
313
314 /* 5. Finally kick DMA off */
315 cookie = dma_tx->tx_submit(dma_tx);
316 if (dma_submit_error(cookie)) {
317 ret = -ENOSPC;
318 goto err_dma_submit;
319 }
320
321 return 0;
322
323 err_dma_submit:
324 out_be32(&lpbfifo.regs->enable,
325 MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
326 err_dma_prep:
327 dma_unmap_single(dma_dev->dev, sg_dma_address(&sg),
328 lpbfifo.req->size, dir);
329 return ret;
330 }
331
mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request * req)332 static int mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request *req)
333 {
334 int ret = 0;
335
336 if (!lpbfifo.regs)
337 return -ENODEV;
338
339 /* Check whether a transfer is in progress */
340 if (lpbfifo.req)
341 return -EBUSY;
342
343 lpbfifo.wait_lpbfifo_irq = true;
344 lpbfifo.wait_lpbfifo_callback = true;
345 lpbfifo.req = req;
346
347 ret = mpc512x_lpbfifo_kick();
348 if (ret != 0)
349 lpbfifo.req = NULL; /* Set the FIFO as idle */
350
351 return ret;
352 }
353
mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request * req)354 int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req)
355 {
356 unsigned long flags;
357 int ret = 0;
358
359 spin_lock_irqsave(&lpbfifo.lock, flags);
360 ret = mpc512x_lpbfifo_submit_locked(req);
361 spin_unlock_irqrestore(&lpbfifo.lock, flags);
362
363 return ret;
364 }
365 EXPORT_SYMBOL(mpc512x_lpbfifo_submit);
366
367 /*
368 * LPBFIFO driver uses "ranges" property of "localbus" device tree node
369 * for being able to determine the chip select number of a client device
370 * ordering a DMA transfer.
371 */
get_cs_ranges(struct device * dev)372 static int get_cs_ranges(struct device *dev)
373 {
374 int ret = -ENODEV;
375 struct device_node *lb_node;
376 size_t i = 0;
377 struct of_range_parser parser;
378 struct of_range range;
379
380 lb_node = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-localbus");
381 if (!lb_node)
382 return ret;
383
384 of_range_parser_init(&parser, lb_node);
385 lpbfifo.cs_n = of_range_count(&parser);
386
387 lpbfifo.cs_ranges = devm_kcalloc(dev, lpbfifo.cs_n,
388 sizeof(struct cs_range), GFP_KERNEL);
389 if (!lpbfifo.cs_ranges)
390 goto end;
391
392 for_each_of_range(&parser, &range) {
393 u32 base = lower_32_bits(range.bus_addr);
394 if (base)
395 goto end;
396
397 lpbfifo.cs_ranges[i].csnum = upper_32_bits(range.bus_addr);
398 lpbfifo.cs_ranges[i].base = base;
399 lpbfifo.cs_ranges[i].addr = range.cpu_addr;
400 lpbfifo.cs_ranges[i].size = range.size;
401 i++;
402 }
403
404 ret = 0;
405
406 end:
407 of_node_put(lb_node);
408 return ret;
409 }
410
mpc512x_lpbfifo_probe(struct platform_device * pdev)411 static int mpc512x_lpbfifo_probe(struct platform_device *pdev)
412 {
413 struct resource r;
414 int ret = 0;
415
416 memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
417 spin_lock_init(&lpbfifo.lock);
418
419 lpbfifo.chan = dma_request_chan(&pdev->dev, "rx-tx");
420 if (IS_ERR(lpbfifo.chan))
421 return PTR_ERR(lpbfifo.chan);
422
423 if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
424 dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
425 ret = -ENODEV;
426 goto err0;
427 }
428
429 lpbfifo.regs_phys = r.start;
430 lpbfifo.regs_size = resource_size(&r);
431
432 if (!devm_request_mem_region(&pdev->dev, lpbfifo.regs_phys,
433 lpbfifo.regs_size, DRV_NAME)) {
434 dev_err(&pdev->dev, "unable to request region\n");
435 ret = -EBUSY;
436 goto err0;
437 }
438
439 lpbfifo.regs = devm_ioremap(&pdev->dev,
440 lpbfifo.regs_phys, lpbfifo.regs_size);
441 if (!lpbfifo.regs) {
442 dev_err(&pdev->dev, "mapping registers failed\n");
443 ret = -ENOMEM;
444 goto err0;
445 }
446
447 out_be32(&lpbfifo.regs->enable,
448 MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
449
450 if (get_cs_ranges(&pdev->dev) != 0) {
451 dev_err(&pdev->dev, "bad '/localbus' device tree node\n");
452 ret = -ENODEV;
453 goto err0;
454 }
455
456 lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
457 if (!lpbfifo.irq) {
458 dev_err(&pdev->dev, "mapping irq failed\n");
459 ret = -ENODEV;
460 goto err0;
461 }
462
463 if (request_irq(lpbfifo.irq, mpc512x_lpbfifo_irq, 0,
464 DRV_NAME, &pdev->dev) != 0) {
465 dev_err(&pdev->dev, "requesting irq failed\n");
466 ret = -ENODEV;
467 goto err1;
468 }
469
470 dev_info(&pdev->dev, "probe succeeded\n");
471 return 0;
472
473 err1:
474 irq_dispose_mapping(lpbfifo.irq);
475 err0:
476 dma_release_channel(lpbfifo.chan);
477 return ret;
478 }
479
mpc512x_lpbfifo_remove(struct platform_device * pdev)480 static void mpc512x_lpbfifo_remove(struct platform_device *pdev)
481 {
482 unsigned long flags;
483 struct dma_device *dma_dev = lpbfifo.chan->device;
484 struct mpc512x_lpbfifo __iomem *regs = NULL;
485
486 spin_lock_irqsave(&lpbfifo.lock, flags);
487 regs = lpbfifo.regs;
488 lpbfifo.regs = NULL;
489 spin_unlock_irqrestore(&lpbfifo.lock, flags);
490
491 dma_dev->device_terminate_all(lpbfifo.chan);
492 out_be32(®s->enable, MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
493
494 free_irq(lpbfifo.irq, &pdev->dev);
495 irq_dispose_mapping(lpbfifo.irq);
496 dma_release_channel(lpbfifo.chan);
497 }
498
499 static const struct of_device_id mpc512x_lpbfifo_match[] = {
500 { .compatible = "fsl,mpc512x-lpbfifo", },
501 {},
502 };
503 MODULE_DEVICE_TABLE(of, mpc512x_lpbfifo_match);
504
505 static struct platform_driver mpc512x_lpbfifo_driver = {
506 .probe = mpc512x_lpbfifo_probe,
507 .remove = mpc512x_lpbfifo_remove,
508 .driver = {
509 .name = DRV_NAME,
510 .of_match_table = mpc512x_lpbfifo_match,
511 },
512 };
513
514 module_platform_driver(mpc512x_lpbfifo_driver);
515
516 MODULE_AUTHOR("Alexander Popov <alex.popov@linux.com>");
517 MODULE_DESCRIPTION("MPC512x LocalPlus Bus FIFO device driver");
518 MODULE_LICENSE("GPL v2");
519