1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * OKI Semiconductor ML86V7667 video decoder driver
4 *
5 * Author: Vladimir Barinov <source@cogentembedded.com>
6 * Copyright (C) 2013 Cogent Embedded, Inc.
7 * Copyright (C) 2013 Renesas Solutions Corp.
8 */
9
10 #include <linux/init.h>
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/slab.h>
14 #include <linux/videodev2.h>
15 #include <media/v4l2-subdev.h>
16 #include <media/v4l2-device.h>
17 #include <media/v4l2-ioctl.h>
18 #include <media/v4l2-ctrls.h>
19
20 #define DRV_NAME "ml86v7667"
21
22 /* Subaddresses */
23 #define MRA_REG 0x00 /* Mode Register A */
24 #define MRC_REG 0x02 /* Mode Register C */
25 #define LUMC_REG 0x0C /* Luminance Control */
26 #define CLC_REG 0x10 /* Contrast level control */
27 #define SSEPL_REG 0x11 /* Sync separation level */
28 #define CHRCA_REG 0x12 /* Chrominance Control A */
29 #define ACCC_REG 0x14 /* ACC Loop filter & Chrominance control */
30 #define ACCRC_REG 0x15 /* ACC Reference level control */
31 #define HUE_REG 0x16 /* Hue control */
32 #define ADC2_REG 0x1F /* ADC Register 2 */
33 #define PLLR1_REG 0x20 /* PLL Register 1 */
34 #define STATUS_REG 0x2C /* STATUS Register */
35
36 /* Mode Register A register bits */
37 #define MRA_OUTPUT_MODE_MASK (3 << 6)
38 #define MRA_ITUR_BT601 (1 << 6)
39 #define MRA_ITUR_BT656 (0 << 6)
40 #define MRA_INPUT_MODE_MASK (7 << 3)
41 #define MRA_PAL_BT601 (4 << 3)
42 #define MRA_NTSC_BT601 (0 << 3)
43 #define MRA_REGISTER_MODE (1 << 0)
44
45 /* Mode Register C register bits */
46 #define MRC_AUTOSELECT (1 << 7)
47
48 /* Luminance Control register bits */
49 #define LUMC_ONOFF_SHIFT 7
50 #define LUMC_ONOFF_MASK (1 << 7)
51
52 /* Contrast level control register bits */
53 #define CLC_CONTRAST_ONOFF (1 << 7)
54 #define CLC_CONTRAST_MASK 0x0F
55
56 /* Sync separation level register bits */
57 #define SSEPL_LUMINANCE_ONOFF (1 << 7)
58 #define SSEPL_LUMINANCE_MASK 0x7F
59
60 /* Chrominance Control A register bits */
61 #define CHRCA_MODE_SHIFT 6
62 #define CHRCA_MODE_MASK (1 << 6)
63
64 /* ACC Loop filter & Chrominance control register bits */
65 #define ACCC_CHROMA_CR_SHIFT 3
66 #define ACCC_CHROMA_CR_MASK (7 << 3)
67 #define ACCC_CHROMA_CB_SHIFT 0
68 #define ACCC_CHROMA_CB_MASK (7 << 0)
69
70 /* ACC Reference level control register bits */
71 #define ACCRC_CHROMA_MASK 0xfc
72 #define ACCRC_CHROMA_SHIFT 2
73
74 /* ADC Register 2 register bits */
75 #define ADC2_CLAMP_VOLTAGE_MASK (7 << 1)
76 #define ADC2_CLAMP_VOLTAGE(n) ((n & 7) << 1)
77
78 /* PLL Register 1 register bits */
79 #define PLLR1_FIXED_CLOCK (1 << 7)
80
81 /* STATUS Register register bits */
82 #define STATUS_HLOCK_DETECT (1 << 3)
83 #define STATUS_NTSCPAL (1 << 2)
84
85 struct ml86v7667_priv {
86 struct v4l2_subdev sd;
87 struct v4l2_ctrl_handler hdl;
88 v4l2_std_id std;
89 };
90
to_ml86v7667(struct v4l2_subdev * subdev)91 static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev)
92 {
93 return container_of(subdev, struct ml86v7667_priv, sd);
94 }
95
to_sd(struct v4l2_ctrl * ctrl)96 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
97 {
98 return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd;
99 }
100
ml86v7667_mask_set(struct i2c_client * client,const u8 reg,const u8 mask,const u8 data)101 static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg,
102 const u8 mask, const u8 data)
103 {
104 int val = i2c_smbus_read_byte_data(client, reg);
105 if (val < 0)
106 return val;
107
108 val = (val & ~mask) | (data & mask);
109 return i2c_smbus_write_byte_data(client, reg, val);
110 }
111
ml86v7667_s_ctrl(struct v4l2_ctrl * ctrl)112 static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl)
113 {
114 struct v4l2_subdev *sd = to_sd(ctrl);
115 struct i2c_client *client = v4l2_get_subdevdata(sd);
116 int ret = -EINVAL;
117
118 switch (ctrl->id) {
119 case V4L2_CID_BRIGHTNESS:
120 ret = ml86v7667_mask_set(client, SSEPL_REG,
121 SSEPL_LUMINANCE_MASK, ctrl->val);
122 break;
123 case V4L2_CID_CONTRAST:
124 ret = ml86v7667_mask_set(client, CLC_REG,
125 CLC_CONTRAST_MASK, ctrl->val);
126 break;
127 case V4L2_CID_CHROMA_GAIN:
128 ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK,
129 ctrl->val << ACCRC_CHROMA_SHIFT);
130 break;
131 case V4L2_CID_HUE:
132 ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val);
133 break;
134 case V4L2_CID_RED_BALANCE:
135 ret = ml86v7667_mask_set(client, ACCC_REG,
136 ACCC_CHROMA_CR_MASK,
137 ctrl->val << ACCC_CHROMA_CR_SHIFT);
138 break;
139 case V4L2_CID_BLUE_BALANCE:
140 ret = ml86v7667_mask_set(client, ACCC_REG,
141 ACCC_CHROMA_CB_MASK,
142 ctrl->val << ACCC_CHROMA_CB_SHIFT);
143 break;
144 case V4L2_CID_SHARPNESS:
145 ret = ml86v7667_mask_set(client, LUMC_REG,
146 LUMC_ONOFF_MASK,
147 ctrl->val << LUMC_ONOFF_SHIFT);
148 break;
149 case V4L2_CID_COLOR_KILLER:
150 ret = ml86v7667_mask_set(client, CHRCA_REG,
151 CHRCA_MODE_MASK,
152 ctrl->val << CHRCA_MODE_SHIFT);
153 break;
154 }
155
156 return ret;
157 }
158
ml86v7667_querystd(struct v4l2_subdev * sd,v4l2_std_id * std)159 static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
160 {
161 struct i2c_client *client = v4l2_get_subdevdata(sd);
162 int status;
163
164 status = i2c_smbus_read_byte_data(client, STATUS_REG);
165 if (status < 0)
166 return status;
167
168 if (status & STATUS_HLOCK_DETECT)
169 *std &= status & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
170 else
171 *std = V4L2_STD_UNKNOWN;
172
173 return 0;
174 }
175
ml86v7667_g_input_status(struct v4l2_subdev * sd,u32 * status)176 static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status)
177 {
178 struct i2c_client *client = v4l2_get_subdevdata(sd);
179 int status_reg;
180
181 status_reg = i2c_smbus_read_byte_data(client, STATUS_REG);
182 if (status_reg < 0)
183 return status_reg;
184
185 *status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL;
186
187 return 0;
188 }
189
ml86v7667_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)190 static int ml86v7667_enum_mbus_code(struct v4l2_subdev *sd,
191 struct v4l2_subdev_state *sd_state,
192 struct v4l2_subdev_mbus_code_enum *code)
193 {
194 if (code->pad || code->index > 0)
195 return -EINVAL;
196
197 code->code = MEDIA_BUS_FMT_YUYV8_2X8;
198
199 return 0;
200 }
201
ml86v7667_fill_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * format)202 static int ml86v7667_fill_fmt(struct v4l2_subdev *sd,
203 struct v4l2_subdev_state *sd_state,
204 struct v4l2_subdev_format *format)
205 {
206 struct ml86v7667_priv *priv = to_ml86v7667(sd);
207 struct v4l2_mbus_framefmt *fmt = &format->format;
208
209 if (format->pad)
210 return -EINVAL;
211
212 fmt->code = MEDIA_BUS_FMT_YUYV8_2X8;
213 fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
214 /* The top field is always transferred first by the chip */
215 fmt->field = V4L2_FIELD_INTERLACED_TB;
216 fmt->width = 720;
217 fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576;
218
219 return 0;
220 }
221
ml86v7667_get_mbus_config(struct v4l2_subdev * sd,unsigned int pad,struct v4l2_mbus_config * cfg)222 static int ml86v7667_get_mbus_config(struct v4l2_subdev *sd,
223 unsigned int pad,
224 struct v4l2_mbus_config *cfg)
225 {
226 cfg->type = V4L2_MBUS_BT656;
227 cfg->bus.parallel.flags = V4L2_MBUS_MASTER |
228 V4L2_MBUS_PCLK_SAMPLE_RISING |
229 V4L2_MBUS_DATA_ACTIVE_HIGH;
230
231 return 0;
232 }
233
ml86v7667_g_std(struct v4l2_subdev * sd,v4l2_std_id * std)234 static int ml86v7667_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
235 {
236 struct ml86v7667_priv *priv = to_ml86v7667(sd);
237
238 *std = priv->std;
239
240 return 0;
241 }
242
ml86v7667_s_std(struct v4l2_subdev * sd,v4l2_std_id std)243 static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
244 {
245 struct ml86v7667_priv *priv = to_ml86v7667(sd);
246 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
247 int ret;
248 u8 mode;
249
250 /* PAL/NTSC ITU-R BT.601 input mode */
251 mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
252 ret = ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, mode);
253 if (ret < 0)
254 return ret;
255
256 priv->std = std;
257
258 return 0;
259 }
260
261 #ifdef CONFIG_VIDEO_ADV_DEBUG
ml86v7667_g_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)262 static int ml86v7667_g_register(struct v4l2_subdev *sd,
263 struct v4l2_dbg_register *reg)
264 {
265 struct i2c_client *client = v4l2_get_subdevdata(sd);
266 int ret;
267
268 ret = i2c_smbus_read_byte_data(client, (u8)reg->reg);
269 if (ret < 0)
270 return ret;
271
272 reg->val = ret;
273 reg->size = sizeof(u8);
274
275 return 0;
276 }
277
ml86v7667_s_register(struct v4l2_subdev * sd,const struct v4l2_dbg_register * reg)278 static int ml86v7667_s_register(struct v4l2_subdev *sd,
279 const struct v4l2_dbg_register *reg)
280 {
281 struct i2c_client *client = v4l2_get_subdevdata(sd);
282
283 return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val);
284 }
285 #endif
286
287 static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = {
288 .s_ctrl = ml86v7667_s_ctrl,
289 };
290
291 static const struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = {
292 .g_std = ml86v7667_g_std,
293 .s_std = ml86v7667_s_std,
294 .querystd = ml86v7667_querystd,
295 .g_input_status = ml86v7667_g_input_status,
296 };
297
298 static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = {
299 .enum_mbus_code = ml86v7667_enum_mbus_code,
300 .get_fmt = ml86v7667_fill_fmt,
301 .set_fmt = ml86v7667_fill_fmt,
302 .get_mbus_config = ml86v7667_get_mbus_config,
303 };
304
305 static const struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = {
306 #ifdef CONFIG_VIDEO_ADV_DEBUG
307 .g_register = ml86v7667_g_register,
308 .s_register = ml86v7667_s_register,
309 #endif
310 };
311
312 static const struct v4l2_subdev_ops ml86v7667_subdev_ops = {
313 .core = &ml86v7667_subdev_core_ops,
314 .video = &ml86v7667_subdev_video_ops,
315 .pad = &ml86v7667_subdev_pad_ops,
316 };
317
ml86v7667_init(struct ml86v7667_priv * priv)318 static int ml86v7667_init(struct ml86v7667_priv *priv)
319 {
320 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
321 int val;
322 int ret;
323
324 /* BT.656-4 output mode, register mode */
325 ret = ml86v7667_mask_set(client, MRA_REG,
326 MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE,
327 MRA_ITUR_BT656 | MRA_REGISTER_MODE);
328
329 /* PLL circuit fixed clock, 32MHz */
330 ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK,
331 PLLR1_FIXED_CLOCK);
332
333 /* ADC2 clamping voltage maximum */
334 ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK,
335 ADC2_CLAMP_VOLTAGE(7));
336
337 /* enable luminance function */
338 ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF,
339 SSEPL_LUMINANCE_ONOFF);
340
341 /* enable contrast function */
342 ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0);
343
344 /*
345 * PAL/NTSC autodetection is enabled after reset,
346 * set the autodetected std in manual std mode and
347 * disable autodetection
348 */
349 val = i2c_smbus_read_byte_data(client, STATUS_REG);
350 if (val < 0)
351 return val;
352
353 priv->std = val & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
354 ret |= ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0);
355
356 val = priv->std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
357 ret |= ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, val);
358
359 return ret;
360 }
361
ml86v7667_probe(struct i2c_client * client)362 static int ml86v7667_probe(struct i2c_client *client)
363 {
364 struct ml86v7667_priv *priv;
365 int ret;
366
367 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
368 return -EIO;
369
370 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
371 if (!priv)
372 return -ENOMEM;
373
374 v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops);
375
376 v4l2_ctrl_handler_init(&priv->hdl, 8);
377 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
378 V4L2_CID_BRIGHTNESS, -64, 63, 1, 0);
379 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
380 V4L2_CID_CONTRAST, -8, 7, 1, 0);
381 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
382 V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0);
383 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
384 V4L2_CID_HUE, -128, 127, 1, 0);
385 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
386 V4L2_CID_RED_BALANCE, -4, 3, 1, 0);
387 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
388 V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0);
389 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
390 V4L2_CID_SHARPNESS, 0, 1, 1, 0);
391 v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
392 V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
393 priv->sd.ctrl_handler = &priv->hdl;
394
395 ret = priv->hdl.error;
396 if (ret)
397 goto cleanup;
398
399 v4l2_ctrl_handler_setup(&priv->hdl);
400
401 ret = ml86v7667_init(priv);
402 if (ret)
403 goto cleanup;
404
405 v4l_info(client, "chip found @ 0x%02x (%s)\n",
406 client->addr, client->adapter->name);
407 return 0;
408
409 cleanup:
410 v4l2_ctrl_handler_free(&priv->hdl);
411 v4l2_device_unregister_subdev(&priv->sd);
412 v4l_err(client, "failed to probe @ 0x%02x (%s)\n",
413 client->addr, client->adapter->name);
414 return ret;
415 }
416
ml86v7667_remove(struct i2c_client * client)417 static void ml86v7667_remove(struct i2c_client *client)
418 {
419 struct v4l2_subdev *sd = i2c_get_clientdata(client);
420 struct ml86v7667_priv *priv = to_ml86v7667(sd);
421
422 v4l2_ctrl_handler_free(&priv->hdl);
423 v4l2_device_unregister_subdev(&priv->sd);
424 }
425
426 static const struct i2c_device_id ml86v7667_id[] = {
427 { DRV_NAME },
428 {}
429 };
430 MODULE_DEVICE_TABLE(i2c, ml86v7667_id);
431
432 static struct i2c_driver ml86v7667_i2c_driver = {
433 .driver = {
434 .name = DRV_NAME,
435 },
436 .probe = ml86v7667_probe,
437 .remove = ml86v7667_remove,
438 .id_table = ml86v7667_id,
439 };
440
441 module_i2c_driver(ml86v7667_i2c_driver);
442
443 MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver");
444 MODULE_AUTHOR("Vladimir Barinov");
445 MODULE_LICENSE("GPL");
446