1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2006-2007 PA Semi, Inc
4 *
5 * Author: Olof Johansson, PA Semi
6 *
7 * Maintained by: Olof Johansson <olof@lixom.net>
8 *
9 * Based on drivers/net/fs_enet/mii-bitbang.c.
10 */
11
12 #include <linux/io.h>
13 #include <linux/module.h>
14 #include <linux/types.h>
15 #include <linux/slab.h>
16 #include <linux/sched.h>
17 #include <linux/errno.h>
18 #include <linux/ioport.h>
19 #include <linux/interrupt.h>
20 #include <linux/phy.h>
21 #include <linux/of_address.h>
22 #include <linux/of_mdio.h>
23 #include <linux/platform_device.h>
24
25 #define DELAY 1
26
27 static void __iomem *gpio_regs;
28
29 struct gpio_priv {
30 int mdc_pin;
31 int mdio_pin;
32 };
33
34 #define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin)
35 #define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin)
36
mdio_lo(struct mii_bus * bus)37 static inline void mdio_lo(struct mii_bus *bus)
38 {
39 out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
40 }
41
mdio_hi(struct mii_bus * bus)42 static inline void mdio_hi(struct mii_bus *bus)
43 {
44 out_le32(gpio_regs, 1 << MDIO_PIN(bus));
45 }
46
mdc_lo(struct mii_bus * bus)47 static inline void mdc_lo(struct mii_bus *bus)
48 {
49 out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
50 }
51
mdc_hi(struct mii_bus * bus)52 static inline void mdc_hi(struct mii_bus *bus)
53 {
54 out_le32(gpio_regs, 1 << MDC_PIN(bus));
55 }
56
mdio_active(struct mii_bus * bus)57 static inline void mdio_active(struct mii_bus *bus)
58 {
59 out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
60 }
61
mdio_tristate(struct mii_bus * bus)62 static inline void mdio_tristate(struct mii_bus *bus)
63 {
64 out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
65 }
66
mdio_read(struct mii_bus * bus)67 static inline int mdio_read(struct mii_bus *bus)
68 {
69 return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
70 }
71
clock_out(struct mii_bus * bus,int bit)72 static void clock_out(struct mii_bus *bus, int bit)
73 {
74 if (bit)
75 mdio_hi(bus);
76 else
77 mdio_lo(bus);
78 udelay(DELAY);
79 mdc_hi(bus);
80 udelay(DELAY);
81 mdc_lo(bus);
82 }
83
84 /* Utility to send the preamble, address, and register (common to read and write). */
bitbang_pre(struct mii_bus * bus,int read,u8 addr,u8 reg)85 static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
86 {
87 int i;
88
89 /* CFE uses a really long preamble (40 bits). We'll do the same. */
90 mdio_active(bus);
91 for (i = 0; i < 40; i++) {
92 clock_out(bus, 1);
93 }
94
95 /* send the start bit (01) and the read opcode (10) or write (10) */
96 clock_out(bus, 0);
97 clock_out(bus, 1);
98
99 clock_out(bus, read);
100 clock_out(bus, !read);
101
102 /* send the PHY address */
103 for (i = 0; i < 5; i++) {
104 clock_out(bus, (addr & 0x10) != 0);
105 addr <<= 1;
106 }
107
108 /* send the register address */
109 for (i = 0; i < 5; i++) {
110 clock_out(bus, (reg & 0x10) != 0);
111 reg <<= 1;
112 }
113 }
114
gpio_mdio_read(struct mii_bus * bus,int phy_id,int location)115 static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
116 {
117 u16 rdreg;
118 int ret, i;
119 u8 addr = phy_id & 0xff;
120 u8 reg = location & 0xff;
121
122 bitbang_pre(bus, 1, addr, reg);
123
124 /* tri-state our MDIO I/O pin so we can read */
125 mdio_tristate(bus);
126 udelay(DELAY);
127 mdc_hi(bus);
128 udelay(DELAY);
129 mdc_lo(bus);
130
131 /* read 16 bits of register data, MSB first */
132 rdreg = 0;
133 for (i = 0; i < 16; i++) {
134 mdc_lo(bus);
135 udelay(DELAY);
136 mdc_hi(bus);
137 udelay(DELAY);
138 mdc_lo(bus);
139 udelay(DELAY);
140 rdreg <<= 1;
141 rdreg |= mdio_read(bus);
142 }
143
144 mdc_hi(bus);
145 udelay(DELAY);
146 mdc_lo(bus);
147 udelay(DELAY);
148
149 ret = rdreg;
150
151 return ret;
152 }
153
gpio_mdio_write(struct mii_bus * bus,int phy_id,int location,u16 val)154 static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
155 {
156 int i;
157
158 u8 addr = phy_id & 0xff;
159 u8 reg = location & 0xff;
160 u16 value = val & 0xffff;
161
162 bitbang_pre(bus, 0, addr, reg);
163
164 /* send the turnaround (10) */
165 mdc_lo(bus);
166 mdio_hi(bus);
167 udelay(DELAY);
168 mdc_hi(bus);
169 udelay(DELAY);
170 mdc_lo(bus);
171 mdio_lo(bus);
172 udelay(DELAY);
173 mdc_hi(bus);
174 udelay(DELAY);
175
176 /* write 16 bits of register data, MSB first */
177 for (i = 0; i < 16; i++) {
178 mdc_lo(bus);
179 if (value & 0x8000)
180 mdio_hi(bus);
181 else
182 mdio_lo(bus);
183 udelay(DELAY);
184 mdc_hi(bus);
185 udelay(DELAY);
186 value <<= 1;
187 }
188
189 /*
190 * Tri-state the MDIO line.
191 */
192 mdio_tristate(bus);
193 mdc_lo(bus);
194 udelay(DELAY);
195 mdc_hi(bus);
196 udelay(DELAY);
197 return 0;
198 }
199
gpio_mdio_reset(struct mii_bus * bus)200 static int gpio_mdio_reset(struct mii_bus *bus)
201 {
202 /*nothing here - dunno how to reset it*/
203 return 0;
204 }
205
206
gpio_mdio_probe(struct platform_device * ofdev)207 static int gpio_mdio_probe(struct platform_device *ofdev)
208 {
209 struct device *dev = &ofdev->dev;
210 struct device_node *np = ofdev->dev.of_node;
211 struct mii_bus *new_bus;
212 struct gpio_priv *priv;
213 const unsigned int *prop;
214 int err;
215
216 err = -ENOMEM;
217 priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
218 if (!priv)
219 goto out;
220
221 new_bus = mdiobus_alloc();
222
223 if (!new_bus)
224 goto out_free_priv;
225
226 new_bus->name = "pasemi gpio mdio bus";
227 new_bus->read = &gpio_mdio_read;
228 new_bus->write = &gpio_mdio_write;
229 new_bus->reset = &gpio_mdio_reset;
230
231 prop = of_get_property(np, "reg", NULL);
232 snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
233 new_bus->priv = priv;
234
235 prop = of_get_property(np, "mdc-pin", NULL);
236 priv->mdc_pin = *prop;
237
238 prop = of_get_property(np, "mdio-pin", NULL);
239 priv->mdio_pin = *prop;
240
241 new_bus->parent = dev;
242 dev_set_drvdata(dev, new_bus);
243
244 err = of_mdiobus_register(new_bus, np);
245
246 if (err != 0) {
247 pr_err("%s: Cannot register as MDIO bus, err %d\n",
248 new_bus->name, err);
249 goto out_free_irq;
250 }
251
252 return 0;
253
254 out_free_irq:
255 kfree(new_bus);
256 out_free_priv:
257 kfree(priv);
258 out:
259 return err;
260 }
261
262
gpio_mdio_remove(struct platform_device * dev)263 static void gpio_mdio_remove(struct platform_device *dev)
264 {
265 struct mii_bus *bus = dev_get_drvdata(&dev->dev);
266
267 mdiobus_unregister(bus);
268
269 dev_set_drvdata(&dev->dev, NULL);
270
271 kfree(bus->priv);
272 bus->priv = NULL;
273 mdiobus_free(bus);
274 }
275
276 static const struct of_device_id gpio_mdio_match[] =
277 {
278 {
279 .compatible = "gpio-mdio",
280 },
281 {},
282 };
283 MODULE_DEVICE_TABLE(of, gpio_mdio_match);
284
285 static struct platform_driver gpio_mdio_driver =
286 {
287 .probe = gpio_mdio_probe,
288 .remove = gpio_mdio_remove,
289 .driver = {
290 .name = "gpio-mdio-bitbang",
291 .of_match_table = gpio_mdio_match,
292 },
293 };
294
gpio_mdio_init(void)295 static int __init gpio_mdio_init(void)
296 {
297 struct device_node *np;
298
299 np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
300 if (!np)
301 np = of_find_compatible_node(NULL, NULL,
302 "pasemi,pwrficient-gpio");
303 if (!np)
304 return -ENODEV;
305 gpio_regs = of_iomap(np, 0);
306 of_node_put(np);
307
308 if (!gpio_regs)
309 return -ENODEV;
310
311 return platform_driver_register(&gpio_mdio_driver);
312 }
313 module_init(gpio_mdio_init);
314
gpio_mdio_exit(void)315 static void __exit gpio_mdio_exit(void)
316 {
317 platform_driver_unregister(&gpio_mdio_driver);
318 if (gpio_regs)
319 iounmap(gpio_regs);
320 }
321 module_exit(gpio_mdio_exit);
322
323 MODULE_LICENSE("GPL");
324 MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
325 MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards");
326