1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor
4 *
5 * Copyright (C) 2017 Matt Ranostay <matt.ranostay@konsulko.com>
6 *
7 * Support for MAX30105 optical particle sensor
8 * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
9 *
10 * 7-bit I2C chip address: 0x57
11 * TODO: proximity power saving feature
12 */
13
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/delay.h>
18 #include <linux/err.h>
19 #include <linux/irq.h>
20 #include <linux/i2c.h>
21 #include <linux/mutex.h>
22 #include <linux/mod_devicetable.h>
23 #include <linux/regmap.h>
24 #include <linux/iio/iio.h>
25 #include <linux/iio/buffer.h>
26 #include <linux/iio/kfifo_buf.h>
27
28 #define MAX30102_REGMAP_NAME "max30102_regmap"
29 #define MAX30102_DRV_NAME "max30102"
30 #define MAX30102_PART_NUMBER 0x15
31
32 enum max30102_chip_id {
33 max30102,
34 max30105,
35 };
36
37 enum max3012_led_idx {
38 MAX30102_LED_RED,
39 MAX30102_LED_IR,
40 MAX30105_LED_GREEN,
41 };
42
43 #define MAX30102_REG_INT_STATUS 0x00
44 #define MAX30102_REG_INT_STATUS_PWR_RDY BIT(0)
45 #define MAX30102_REG_INT_STATUS_PROX_INT BIT(4)
46 #define MAX30102_REG_INT_STATUS_ALC_OVF BIT(5)
47 #define MAX30102_REG_INT_STATUS_PPG_RDY BIT(6)
48 #define MAX30102_REG_INT_STATUS_FIFO_RDY BIT(7)
49
50 #define MAX30102_REG_INT_ENABLE 0x02
51 #define MAX30102_REG_INT_ENABLE_PROX_INT_EN BIT(4)
52 #define MAX30102_REG_INT_ENABLE_ALC_OVF_EN BIT(5)
53 #define MAX30102_REG_INT_ENABLE_PPG_EN BIT(6)
54 #define MAX30102_REG_INT_ENABLE_FIFO_EN BIT(7)
55 #define MAX30102_REG_INT_ENABLE_MASK 0xf0
56 #define MAX30102_REG_INT_ENABLE_MASK_SHIFT 4
57
58 #define MAX30102_REG_FIFO_WR_PTR 0x04
59 #define MAX30102_REG_FIFO_OVR_CTR 0x05
60 #define MAX30102_REG_FIFO_RD_PTR 0x06
61 #define MAX30102_REG_FIFO_DATA 0x07
62 #define MAX30102_REG_FIFO_DATA_BYTES 3
63
64 #define MAX30102_REG_FIFO_CONFIG 0x08
65 #define MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES BIT(1)
66 #define MAX30102_REG_FIFO_CONFIG_AVG_SHIFT 5
67 #define MAX30102_REG_FIFO_CONFIG_AFULL BIT(0)
68
69 #define MAX30102_REG_MODE_CONFIG 0x09
70 #define MAX30102_REG_MODE_CONFIG_MODE_NONE 0x00
71 #define MAX30102_REG_MODE_CONFIG_MODE_HR 0x02 /* red LED */
72 #define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2 0x03 /* red + IR LED */
73 #define MAX30102_REG_MODE_CONFIG_MODE_MULTI 0x07 /* multi-LED mode */
74 #define MAX30102_REG_MODE_CONFIG_MODE_MASK GENMASK(2, 0)
75 #define MAX30102_REG_MODE_CONFIG_PWR BIT(7)
76
77 #define MAX30102_REG_MODE_CONTROL_SLOT21 0x11 /* multi-LED control */
78 #define MAX30102_REG_MODE_CONTROL_SLOT43 0x12
79 #define MAX30102_REG_MODE_CONTROL_SLOT_MASK (GENMASK(6, 4) | GENMASK(2, 0))
80 #define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT 4
81
82 #define MAX30102_REG_SPO2_CONFIG 0x0a
83 #define MAX30102_REG_SPO2_CONFIG_PULSE_411_US 0x03
84 #define MAX30102_REG_SPO2_CONFIG_SR_400HZ 0x03
85 #define MAX30102_REG_SPO2_CONFIG_SR_MASK 0x07
86 #define MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT 2
87 #define MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS BIT(0)
88 #define MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT 5
89
90 #define MAX30102_REG_RED_LED_CONFIG 0x0c
91 #define MAX30102_REG_IR_LED_CONFIG 0x0d
92 #define MAX30105_REG_GREEN_LED_CONFIG 0x0e
93
94 #define MAX30102_REG_TEMP_CONFIG 0x21
95 #define MAX30102_REG_TEMP_CONFIG_TEMP_EN BIT(0)
96
97 #define MAX30102_REG_TEMP_INTEGER 0x1f
98 #define MAX30102_REG_TEMP_FRACTION 0x20
99
100 #define MAX30102_REG_REV_ID 0xfe
101 #define MAX30102_REG_PART_ID 0xff
102
103 struct max30102_data {
104 struct i2c_client *client;
105 struct iio_dev *indio_dev;
106 struct mutex lock;
107 struct regmap *regmap;
108 enum max30102_chip_id chip_id;
109
110 u8 buffer[12];
111 __be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
112 };
113
114 static const struct regmap_config max30102_regmap_config = {
115 .name = MAX30102_REGMAP_NAME,
116
117 .reg_bits = 8,
118 .val_bits = 8,
119 };
120
121 static const unsigned long max30102_scan_masks[] = {
122 BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
123 0
124 };
125
126 static const unsigned long max30105_scan_masks[] = {
127 BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
128 BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
129 BIT(MAX30105_LED_GREEN),
130 0
131 };
132
133 #define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
134 .type = IIO_INTENSITY, \
135 .channel2 = _mod, \
136 .modified = 1, \
137 .scan_index = _si, \
138 .scan_type = { \
139 .sign = 'u', \
140 .shift = 8, \
141 .realbits = 18, \
142 .storagebits = 32, \
143 .endianness = IIO_BE, \
144 }, \
145 }
146
147 static const struct iio_chan_spec max30102_channels[] = {
148 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
149 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
150 {
151 .type = IIO_TEMP,
152 .info_mask_separate =
153 BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
154 .scan_index = -1,
155 },
156 };
157
158 static const struct iio_chan_spec max30105_channels[] = {
159 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
160 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
161 MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
162 {
163 .type = IIO_TEMP,
164 .info_mask_separate =
165 BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
166 .scan_index = -1,
167 },
168 };
169
max30102_set_power(struct max30102_data * data,bool en)170 static int max30102_set_power(struct max30102_data *data, bool en)
171 {
172 return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
173 MAX30102_REG_MODE_CONFIG_PWR,
174 en ? 0 : MAX30102_REG_MODE_CONFIG_PWR);
175 }
176
max30102_set_powermode(struct max30102_data * data,u8 mode,bool en)177 static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
178 {
179 u8 reg = mode;
180
181 if (!en)
182 reg |= MAX30102_REG_MODE_CONFIG_PWR;
183
184 return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
185 MAX30102_REG_MODE_CONFIG_PWR |
186 MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
187 }
188
189 #define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
190 ((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
191
max30102_buffer_postenable(struct iio_dev * indio_dev)192 static int max30102_buffer_postenable(struct iio_dev *indio_dev)
193 {
194 struct max30102_data *data = iio_priv(indio_dev);
195 int ret;
196 u8 reg;
197
198 switch (*indio_dev->active_scan_mask) {
199 case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
200 reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
201 break;
202 case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
203 BIT(MAX30105_LED_GREEN):
204 ret = regmap_update_bits(data->regmap,
205 MAX30102_REG_MODE_CONTROL_SLOT21,
206 MAX30102_REG_MODE_CONTROL_SLOT_MASK,
207 MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
208 if (ret)
209 return ret;
210
211 ret = regmap_update_bits(data->regmap,
212 MAX30102_REG_MODE_CONTROL_SLOT43,
213 MAX30102_REG_MODE_CONTROL_SLOT_MASK,
214 MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
215 if (ret)
216 return ret;
217
218 reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
219 break;
220 default:
221 return -EINVAL;
222 }
223
224 return max30102_set_powermode(data, reg, true);
225 }
226
max30102_buffer_predisable(struct iio_dev * indio_dev)227 static int max30102_buffer_predisable(struct iio_dev *indio_dev)
228 {
229 struct max30102_data *data = iio_priv(indio_dev);
230
231 return max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
232 false);
233 }
234
235 static const struct iio_buffer_setup_ops max30102_buffer_setup_ops = {
236 .postenable = max30102_buffer_postenable,
237 .predisable = max30102_buffer_predisable,
238 };
239
max30102_fifo_count(struct max30102_data * data)240 static inline int max30102_fifo_count(struct max30102_data *data)
241 {
242 unsigned int val;
243 int ret;
244
245 ret = regmap_read(data->regmap, MAX30102_REG_INT_STATUS, &val);
246 if (ret)
247 return ret;
248
249 /* FIFO has one sample slot left */
250 if (val & MAX30102_REG_INT_STATUS_FIFO_RDY)
251 return 1;
252
253 return 0;
254 }
255
256 #define MAX30102_COPY_DATA(i) \
257 memcpy(&data->processed_buffer[(i)], \
258 &buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
259 MAX30102_REG_FIFO_DATA_BYTES)
260
max30102_read_measurement(struct max30102_data * data,unsigned int measurements)261 static int max30102_read_measurement(struct max30102_data *data,
262 unsigned int measurements)
263 {
264 int ret;
265 u8 *buffer = (u8 *) &data->buffer;
266
267 ret = i2c_smbus_read_i2c_block_data(data->client,
268 MAX30102_REG_FIFO_DATA,
269 measurements *
270 MAX30102_REG_FIFO_DATA_BYTES,
271 buffer);
272
273 switch (measurements) {
274 case 3:
275 MAX30102_COPY_DATA(2);
276 fallthrough;
277 case 2:
278 MAX30102_COPY_DATA(1);
279 fallthrough;
280 case 1:
281 MAX30102_COPY_DATA(0);
282 break;
283 default:
284 return -EINVAL;
285 }
286
287 return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
288 0 : -EINVAL;
289 }
290
max30102_interrupt_handler(int irq,void * private)291 static irqreturn_t max30102_interrupt_handler(int irq, void *private)
292 {
293 struct iio_dev *indio_dev = private;
294 struct max30102_data *data = iio_priv(indio_dev);
295 unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
296 iio_get_masklength(indio_dev));
297 int ret, cnt = 0;
298
299 mutex_lock(&data->lock);
300
301 while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
302 ret = max30102_read_measurement(data, measurements);
303 if (ret)
304 break;
305
306 iio_push_to_buffers(data->indio_dev, data->processed_buffer);
307 cnt--;
308 }
309
310 mutex_unlock(&data->lock);
311
312 return IRQ_HANDLED;
313 }
314
max30102_get_current_idx(unsigned int val,int * reg)315 static int max30102_get_current_idx(unsigned int val, int *reg)
316 {
317 /* each step is 0.200 mA */
318 *reg = val / 200;
319
320 return *reg > 0xff ? -EINVAL : 0;
321 }
322
max30102_led_init(struct max30102_data * data)323 static int max30102_led_init(struct max30102_data *data)
324 {
325 struct device *dev = &data->client->dev;
326 unsigned int val;
327 int reg, ret;
328
329 ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val);
330 if (ret) {
331 dev_info(dev, "no red-led-current-microamp set\n");
332
333 /* Default to 7 mA RED LED */
334 val = 7000;
335 }
336
337 ret = max30102_get_current_idx(val, ®);
338 if (ret) {
339 dev_err(dev, "invalid RED LED current setting %d\n", val);
340 return ret;
341 }
342
343 ret = regmap_write(data->regmap, MAX30102_REG_RED_LED_CONFIG, reg);
344 if (ret)
345 return ret;
346
347 if (data->chip_id == max30105) {
348 ret = device_property_read_u32(dev,
349 "maxim,green-led-current-microamp", &val);
350 if (ret) {
351 dev_info(dev, "no green-led-current-microamp set\n");
352
353 /* Default to 7 mA green LED */
354 val = 7000;
355 }
356
357 ret = max30102_get_current_idx(val, ®);
358 if (ret) {
359 dev_err(dev, "invalid green LED current setting %d\n",
360 val);
361 return ret;
362 }
363
364 ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
365 reg);
366 if (ret)
367 return ret;
368 }
369
370 ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val);
371 if (ret) {
372 dev_info(dev, "no ir-led-current-microamp set\n");
373
374 /* Default to 7 mA IR LED */
375 val = 7000;
376 }
377
378 ret = max30102_get_current_idx(val, ®);
379 if (ret) {
380 dev_err(dev, "invalid IR LED current setting %d\n", val);
381 return ret;
382 }
383
384 return regmap_write(data->regmap, MAX30102_REG_IR_LED_CONFIG, reg);
385 }
386
max30102_chip_init(struct max30102_data * data)387 static int max30102_chip_init(struct max30102_data *data)
388 {
389 int ret;
390
391 /* setup LED current settings */
392 ret = max30102_led_init(data);
393 if (ret)
394 return ret;
395
396 /* configure 18-bit HR + SpO2 readings at 400Hz */
397 ret = regmap_write(data->regmap, MAX30102_REG_SPO2_CONFIG,
398 (MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS
399 << MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT) |
400 (MAX30102_REG_SPO2_CONFIG_SR_400HZ
401 << MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT) |
402 MAX30102_REG_SPO2_CONFIG_PULSE_411_US);
403 if (ret)
404 return ret;
405
406 /* average 4 samples + generate FIFO interrupt */
407 ret = regmap_write(data->regmap, MAX30102_REG_FIFO_CONFIG,
408 (MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES
409 << MAX30102_REG_FIFO_CONFIG_AVG_SHIFT) |
410 MAX30102_REG_FIFO_CONFIG_AFULL);
411 if (ret)
412 return ret;
413
414 /* enable FIFO interrupt */
415 return regmap_update_bits(data->regmap, MAX30102_REG_INT_ENABLE,
416 MAX30102_REG_INT_ENABLE_MASK,
417 MAX30102_REG_INT_ENABLE_FIFO_EN);
418 }
419
max30102_read_temp(struct max30102_data * data,int * val)420 static int max30102_read_temp(struct max30102_data *data, int *val)
421 {
422 int ret;
423 unsigned int reg;
424
425 ret = regmap_read(data->regmap, MAX30102_REG_TEMP_INTEGER, ®);
426 if (ret < 0)
427 return ret;
428 *val = reg << 4;
429
430 ret = regmap_read(data->regmap, MAX30102_REG_TEMP_FRACTION, ®);
431 if (ret < 0)
432 return ret;
433
434 *val |= reg & 0xf;
435 *val = sign_extend32(*val, 11);
436
437 return 0;
438 }
439
max30102_get_temp(struct max30102_data * data,int * val,bool en)440 static int max30102_get_temp(struct max30102_data *data, int *val, bool en)
441 {
442 int ret;
443
444 if (en) {
445 ret = max30102_set_power(data, true);
446 if (ret)
447 return ret;
448 }
449
450 /* start acquisition */
451 ret = regmap_set_bits(data->regmap, MAX30102_REG_TEMP_CONFIG,
452 MAX30102_REG_TEMP_CONFIG_TEMP_EN);
453 if (ret)
454 goto out;
455
456 msleep(35);
457 ret = max30102_read_temp(data, val);
458
459 out:
460 if (en)
461 max30102_set_power(data, false);
462
463 return ret;
464 }
465
max30102_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)466 static int max30102_read_raw(struct iio_dev *indio_dev,
467 struct iio_chan_spec const *chan,
468 int *val, int *val2, long mask)
469 {
470 struct max30102_data *data = iio_priv(indio_dev);
471 int ret = -EINVAL;
472
473 switch (mask) {
474 case IIO_CHAN_INFO_RAW:
475 /*
476 * Temperature reading can only be acquired when not in
477 * shutdown; leave shutdown briefly when buffer not running
478 */
479 any_mode_retry:
480 if (iio_device_claim_buffer_mode(indio_dev)) {
481 /*
482 * This one is a *bit* hacky. If we cannot claim buffer
483 * mode, then try direct mode so that we make sure
484 * things cannot concurrently change. And we just keep
485 * trying until we get one of the modes...
486 */
487 if (iio_device_claim_direct_mode(indio_dev))
488 goto any_mode_retry;
489
490 ret = max30102_get_temp(data, val, true);
491 iio_device_release_direct_mode(indio_dev);
492 } else {
493 ret = max30102_get_temp(data, val, false);
494 iio_device_release_buffer_mode(indio_dev);
495 }
496 if (ret)
497 return ret;
498
499 ret = IIO_VAL_INT;
500 break;
501 case IIO_CHAN_INFO_SCALE:
502 *val = 1000; /* 62.5 */
503 *val2 = 16;
504 ret = IIO_VAL_FRACTIONAL;
505 break;
506 }
507
508 return ret;
509 }
510
511 static const struct iio_info max30102_info = {
512 .read_raw = max30102_read_raw,
513 };
514
max30102_probe(struct i2c_client * client)515 static int max30102_probe(struct i2c_client *client)
516 {
517 const struct i2c_device_id *id = i2c_client_get_device_id(client);
518 struct max30102_data *data;
519 struct iio_dev *indio_dev;
520 int ret;
521 unsigned int reg;
522
523 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
524 if (!indio_dev)
525 return -ENOMEM;
526
527 indio_dev->name = MAX30102_DRV_NAME;
528 indio_dev->info = &max30102_info;
529 indio_dev->modes = INDIO_DIRECT_MODE;
530
531 data = iio_priv(indio_dev);
532 data->indio_dev = indio_dev;
533 data->client = client;
534 data->chip_id = id->driver_data;
535
536 mutex_init(&data->lock);
537 i2c_set_clientdata(client, indio_dev);
538
539 switch (data->chip_id) {
540 case max30105:
541 indio_dev->channels = max30105_channels;
542 indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
543 indio_dev->available_scan_masks = max30105_scan_masks;
544 break;
545 case max30102:
546 indio_dev->channels = max30102_channels;
547 indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
548 indio_dev->available_scan_masks = max30102_scan_masks;
549 break;
550 default:
551 return -ENODEV;
552 }
553
554 ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
555 &max30102_buffer_setup_ops);
556 if (ret)
557 return ret;
558
559 data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
560 if (IS_ERR(data->regmap)) {
561 dev_err(&client->dev, "regmap initialization failed\n");
562 return PTR_ERR(data->regmap);
563 }
564
565 /* check part ID */
566 ret = regmap_read(data->regmap, MAX30102_REG_PART_ID, ®);
567 if (ret)
568 return ret;
569 if (reg != MAX30102_PART_NUMBER)
570 return -ENODEV;
571
572 /* show revision ID */
573 ret = regmap_read(data->regmap, MAX30102_REG_REV_ID, ®);
574 if (ret)
575 return ret;
576 dev_dbg(&client->dev, "max3010x revision %02x\n", reg);
577
578 /* clear mode setting, chip shutdown */
579 ret = max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
580 false);
581 if (ret)
582 return ret;
583
584 ret = max30102_chip_init(data);
585 if (ret)
586 return ret;
587
588 if (client->irq <= 0) {
589 dev_err(&client->dev, "no valid irq defined\n");
590 return -EINVAL;
591 }
592
593 ret = devm_request_threaded_irq(&client->dev, client->irq,
594 NULL, max30102_interrupt_handler,
595 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
596 "max30102_irq", indio_dev);
597 if (ret) {
598 dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
599 return ret;
600 }
601
602 return iio_device_register(indio_dev);
603 }
604
max30102_remove(struct i2c_client * client)605 static void max30102_remove(struct i2c_client *client)
606 {
607 struct iio_dev *indio_dev = i2c_get_clientdata(client);
608 struct max30102_data *data = iio_priv(indio_dev);
609
610 iio_device_unregister(indio_dev);
611 max30102_set_power(data, false);
612 }
613
614 static const struct i2c_device_id max30102_id[] = {
615 { "max30101", max30105 },
616 { "max30102", max30102 },
617 { "max30105", max30105 },
618 {}
619 };
620 MODULE_DEVICE_TABLE(i2c, max30102_id);
621
622 static const struct of_device_id max30102_dt_ids[] = {
623 { .compatible = "maxim,max30101" },
624 { .compatible = "maxim,max30102" },
625 { .compatible = "maxim,max30105" },
626 { }
627 };
628 MODULE_DEVICE_TABLE(of, max30102_dt_ids);
629
630 static struct i2c_driver max30102_driver = {
631 .driver = {
632 .name = MAX30102_DRV_NAME,
633 .of_match_table = max30102_dt_ids,
634 },
635 .probe = max30102_probe,
636 .remove = max30102_remove,
637 .id_table = max30102_id,
638 };
639 module_i2c_driver(max30102_driver);
640
641 MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
642 MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
643 MODULE_LICENSE("GPL");
644