1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Support for SuperH MigoR Quarter VGA LCD Panel
4 *
5 * Copyright (C) 2008 Magnus Damm
6 *
7 * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
8 * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
9 */
10
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/fb.h>
14 #include <linux/init.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/gpio.h>
18 #include <video/sh_mobile_lcdc.h>
19 #include <cpu/sh7722.h>
20 #include <mach/migor.h>
21
22 /* LCD Module is a PH240320T according to board schematics. This module
23 * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
24 * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
25 * SYS-80 interface configured in 16 bit mode.
26 *
27 * Index 0: "Device Code Read" returns 0x1505.
28 */
29
reset_lcd_module(void)30 static void reset_lcd_module(void)
31 {
32 gpio_set_value(GPIO_PTH2, 0);
33 mdelay(2);
34 gpio_set_value(GPIO_PTH2, 1);
35 mdelay(1);
36 }
37
38 /* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
39
adjust_reg18(unsigned short data)40 static unsigned long adjust_reg18(unsigned short data)
41 {
42 unsigned long tmp1, tmp2;
43
44 tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
45 tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
46 return tmp1 | tmp2;
47 }
48
write_reg(void * sys_ops_handle,struct sh_mobile_lcdc_sys_bus_ops * sys_ops,unsigned short reg,unsigned short data)49 static void write_reg(void *sys_ops_handle,
50 struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
51 unsigned short reg, unsigned short data)
52 {
53 sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
54 }
55
write_reg16(void * sys_ops_handle,struct sh_mobile_lcdc_sys_bus_ops * sys_ops,unsigned short reg,unsigned short data)56 static void write_reg16(void *sys_ops_handle,
57 struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
58 unsigned short reg, unsigned short data)
59 {
60 sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
61 sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
62 }
63
read_reg16(void * sys_ops_handle,struct sh_mobile_lcdc_sys_bus_ops * sys_ops,unsigned short reg)64 static unsigned long read_reg16(void *sys_ops_handle,
65 struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
66 unsigned short reg)
67 {
68 unsigned long data;
69
70 sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
71 data = sys_ops->read_data(sys_ops_handle);
72 return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
73 }
74
migor_lcd_qvga_seq(void * sys_ops_handle,struct sh_mobile_lcdc_sys_bus_ops * sys_ops,unsigned short const * data,int no_data)75 static void migor_lcd_qvga_seq(void *sys_ops_handle,
76 struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
77 unsigned short const *data, int no_data)
78 {
79 int i;
80
81 for (i = 0; i < no_data; i += 2)
82 write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
83 }
84
85 static const unsigned short sync_data[] = {
86 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
87 };
88
89 static const unsigned short magic0_data[] = {
90 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
91 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
92 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
93 };
94
95 static const unsigned short magic1_data[] = {
96 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
97 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
98 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
99 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
100 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
101 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
102 0x0015, 0x8000,
103 };
104
105 static const unsigned short magic2_data[] = {
106 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
107 };
108
109 static const unsigned short magic3_data[] = {
110 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
111 };
112
migor_lcd_qvga_setup(void * sohandle,struct sh_mobile_lcdc_sys_bus_ops * so)113 int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
114 {
115 unsigned long xres = 320;
116 unsigned long yres = 240;
117 int k;
118
119 reset_lcd_module();
120 migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
121
122 if (read_reg16(sohandle, so, 0) != 0x1505)
123 return -ENODEV;
124
125 pr_info("Migo-R QVGA LCD Module detected.\n");
126
127 migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
128 write_reg16(sohandle, so, 0x00A4, 0x0001);
129 mdelay(10);
130
131 migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
132 mdelay(100);
133
134 migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
135 write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
136 write_reg16(sohandle, so, 0x0051, 0x00ef);
137 write_reg16(sohandle, so, 0x0052, 0x0000);
138 write_reg16(sohandle, so, 0x0053, xres - 1);
139
140 migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
141 mdelay(10);
142
143 migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
144 mdelay(40);
145
146 /* clear GRAM to avoid displaying garbage */
147
148 write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
149 write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
150
151 for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
152 write_reg16(sohandle, so, 0x0022, 0x0000);
153
154 write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
155 write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
156 write_reg16(sohandle, so, 0x0007, 0x0173);
157 mdelay(40);
158
159 /* enable display */
160 write_reg(sohandle, so, 0x00, 0x22);
161 mdelay(100);
162 return 0;
163 }
164