1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Intel Lynxpoint PCH pinctrl/GPIO driver
4 *
5 * Copyright (c) 2012, 2019, Intel Corporation
6 * Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
7 * Andy Shevchenko <andriy.shevchenko@linux.intel.com>
8 */
9
10 #include <linux/acpi.h>
11 #include <linux/array_size.h>
12 #include <linux/bitops.h>
13 #include <linux/cleanup.h>
14 #include <linux/gpio/driver.h>
15 #include <linux/interrupt.h>
16 #include <linux/io.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/pm.h>
20 #include <linux/seq_file.h>
21 #include <linux/slab.h>
22 #include <linux/types.h>
23
24 #include <linux/pinctrl/consumer.h>
25 #include <linux/pinctrl/pinconf-generic.h>
26 #include <linux/pinctrl/pinconf.h>
27 #include <linux/pinctrl/pinctrl.h>
28 #include <linux/pinctrl/pinmux.h>
29
30 #include "pinctrl-intel.h"
31
32 #define COMMUNITY(p, n) \
33 { \
34 .pin_base = (p), \
35 .npins = (n), \
36 }
37
38 static const struct pinctrl_pin_desc lptlp_pins[] = {
39 PINCTRL_PIN(0, "GP0_UART1_RXD"),
40 PINCTRL_PIN(1, "GP1_UART1_TXD"),
41 PINCTRL_PIN(2, "GP2_UART1_RTSB"),
42 PINCTRL_PIN(3, "GP3_UART1_CTSB"),
43 PINCTRL_PIN(4, "GP4_I2C0_SDA"),
44 PINCTRL_PIN(5, "GP5_I2C0_SCL"),
45 PINCTRL_PIN(6, "GP6_I2C1_SDA"),
46 PINCTRL_PIN(7, "GP7_I2C1_SCL"),
47 PINCTRL_PIN(8, "GP8"),
48 PINCTRL_PIN(9, "GP9"),
49 PINCTRL_PIN(10, "GP10"),
50 PINCTRL_PIN(11, "GP11_SMBALERTB"),
51 PINCTRL_PIN(12, "GP12_LANPHYPC"),
52 PINCTRL_PIN(13, "GP13"),
53 PINCTRL_PIN(14, "GP14"),
54 PINCTRL_PIN(15, "GP15"),
55 PINCTRL_PIN(16, "GP16_MGPIO9"),
56 PINCTRL_PIN(17, "GP17_MGPIO10"),
57 PINCTRL_PIN(18, "GP18_SRC0CLKRQB"),
58 PINCTRL_PIN(19, "GP19_SRC1CLKRQB"),
59 PINCTRL_PIN(20, "GP20_SRC2CLKRQB"),
60 PINCTRL_PIN(21, "GP21_SRC3CLKRQB"),
61 PINCTRL_PIN(22, "GP22_SRC4CLKRQB_TRST2"),
62 PINCTRL_PIN(23, "GP23_SRC5CLKRQB_TDI2"),
63 PINCTRL_PIN(24, "GP24_MGPIO0"),
64 PINCTRL_PIN(25, "GP25_USBWAKEOUTB"),
65 PINCTRL_PIN(26, "GP26_MGPIO5"),
66 PINCTRL_PIN(27, "GP27_MGPIO6"),
67 PINCTRL_PIN(28, "GP28_MGPIO7"),
68 PINCTRL_PIN(29, "GP29_SLP_WLANB_MGPIO3"),
69 PINCTRL_PIN(30, "GP30_SUSWARNB_SUSPWRDNACK_MGPIO1"),
70 PINCTRL_PIN(31, "GP31_ACPRESENT_MGPIO2"),
71 PINCTRL_PIN(32, "GP32_CLKRUNB"),
72 PINCTRL_PIN(33, "GP33_DEVSLP0"),
73 PINCTRL_PIN(34, "GP34_SATA0XPCIE6L3B_SATA0GP"),
74 PINCTRL_PIN(35, "GP35_SATA1XPCIE6L2B_SATA1GP"),
75 PINCTRL_PIN(36, "GP36_SATA2XPCIE6L1B_SATA2GP"),
76 PINCTRL_PIN(37, "GP37_SATA3XPCIE6L0B_SATA3GP"),
77 PINCTRL_PIN(38, "GP38_DEVSLP1"),
78 PINCTRL_PIN(39, "GP39_DEVSLP2"),
79 PINCTRL_PIN(40, "GP40_OC0B"),
80 PINCTRL_PIN(41, "GP41_OC1B"),
81 PINCTRL_PIN(42, "GP42_OC2B"),
82 PINCTRL_PIN(43, "GP43_OC3B"),
83 PINCTRL_PIN(44, "GP44"),
84 PINCTRL_PIN(45, "GP45_TMS2"),
85 PINCTRL_PIN(46, "GP46_TDO2"),
86 PINCTRL_PIN(47, "GP47"),
87 PINCTRL_PIN(48, "GP48"),
88 PINCTRL_PIN(49, "GP49"),
89 PINCTRL_PIN(50, "GP50"),
90 PINCTRL_PIN(51, "GP51_GSXDOUT"),
91 PINCTRL_PIN(52, "GP52_GSXSLOAD"),
92 PINCTRL_PIN(53, "GP53_GSXDIN"),
93 PINCTRL_PIN(54, "GP54_GSXSRESETB"),
94 PINCTRL_PIN(55, "GP55_GSXCLK"),
95 PINCTRL_PIN(56, "GP56"),
96 PINCTRL_PIN(57, "GP57"),
97 PINCTRL_PIN(58, "GP58"),
98 PINCTRL_PIN(59, "GP59"),
99 PINCTRL_PIN(60, "GP60_SML0ALERTB_MGPIO4"),
100 PINCTRL_PIN(61, "GP61_SUS_STATB"),
101 PINCTRL_PIN(62, "GP62_SUSCLK"),
102 PINCTRL_PIN(63, "GP63_SLP_S5B"),
103 PINCTRL_PIN(64, "GP64_SDIO_CLK"),
104 PINCTRL_PIN(65, "GP65_SDIO_CMD"),
105 PINCTRL_PIN(66, "GP66_SDIO_D0"),
106 PINCTRL_PIN(67, "GP67_SDIO_D1"),
107 PINCTRL_PIN(68, "GP68_SDIO_D2"),
108 PINCTRL_PIN(69, "GP69_SDIO_D3"),
109 PINCTRL_PIN(70, "GP70_SDIO_POWER_EN"),
110 PINCTRL_PIN(71, "GP71_MPHYPC"),
111 PINCTRL_PIN(72, "GP72_BATLOWB"),
112 PINCTRL_PIN(73, "GP73_SML1ALERTB_PCHHOTB_MGPIO8"),
113 PINCTRL_PIN(74, "GP74_SML1DATA_MGPIO12"),
114 PINCTRL_PIN(75, "GP75_SML1CLK_MGPIO11"),
115 PINCTRL_PIN(76, "GP76_BMBUSYB"),
116 PINCTRL_PIN(77, "GP77_PIRQAB"),
117 PINCTRL_PIN(78, "GP78_PIRQBB"),
118 PINCTRL_PIN(79, "GP79_PIRQCB"),
119 PINCTRL_PIN(80, "GP80_PIRQDB"),
120 PINCTRL_PIN(81, "GP81_SPKR"),
121 PINCTRL_PIN(82, "GP82_RCINB"),
122 PINCTRL_PIN(83, "GP83_GSPI0_CSB"),
123 PINCTRL_PIN(84, "GP84_GSPI0_CLK"),
124 PINCTRL_PIN(85, "GP85_GSPI0_MISO"),
125 PINCTRL_PIN(86, "GP86_GSPI0_MOSI"),
126 PINCTRL_PIN(87, "GP87_GSPI1_CSB"),
127 PINCTRL_PIN(88, "GP88_GSPI1_CLK"),
128 PINCTRL_PIN(89, "GP89_GSPI1_MISO"),
129 PINCTRL_PIN(90, "GP90_GSPI1_MOSI"),
130 PINCTRL_PIN(91, "GP91_UART0_RXD"),
131 PINCTRL_PIN(92, "GP92_UART0_TXD"),
132 PINCTRL_PIN(93, "GP93_UART0_RTSB"),
133 PINCTRL_PIN(94, "GP94_UART0_CTSB"),
134 };
135
136 static const struct intel_community lptlp_communities[] = {
137 COMMUNITY(0, 95),
138 };
139
140 static const struct intel_pinctrl_soc_data lptlp_soc_data = {
141 .pins = lptlp_pins,
142 .npins = ARRAY_SIZE(lptlp_pins),
143 .communities = lptlp_communities,
144 .ncommunities = ARRAY_SIZE(lptlp_communities),
145 };
146
147 /* LynxPoint chipset has support for 95 GPIO pins */
148
149 #define LP_NUM_GPIO 95
150
151 /* Bitmapped register offsets */
152 #define LP_ACPI_OWNED 0x00 /* Bitmap, set by bios, 0: pin reserved for ACPI */
153 #define LP_IRQ2IOXAPIC 0x10 /* Bitmap, set by bios, 1: pin routed to IOxAPIC */
154 #define LP_GC 0x7C /* set APIC IRQ to IRQ14 or IRQ15 for all pins */
155 #define LP_INT_STAT 0x80
156 #define LP_INT_ENABLE 0x90
157
158 /* Each pin has two 32 bit config registers, starting at 0x100 */
159 #define LP_CONFIG1 0x100
160 #define LP_CONFIG2 0x104
161
162 /* LP_CONFIG1 reg bits */
163 #define OUT_LVL_BIT BIT(31)
164 #define IN_LVL_BIT BIT(30)
165 #define TRIG_SEL_BIT BIT(4) /* 0: Edge, 1: Level */
166 #define INT_INV_BIT BIT(3) /* Invert interrupt triggering */
167 #define DIR_BIT BIT(2) /* 0: Output, 1: Input */
168 #define USE_SEL_MASK GENMASK(1, 0) /* 0: Native, 1: GPIO, ... */
169 #define USE_SEL_NATIVE (0 << 0)
170 #define USE_SEL_GPIO (1 << 0)
171
172 /* LP_CONFIG2 reg bits */
173 #define GPINDIS_BIT BIT(2) /* disable input sensing */
174 #define GPIWP_MASK GENMASK(1, 0) /* weak pull options */
175 #define GPIWP_NONE 0 /* none */
176 #define GPIWP_DOWN 1 /* weak pull down */
177 #define GPIWP_UP 2 /* weak pull up */
178
179 /*
180 * Lynxpoint gpios are controlled through both bitmapped registers and
181 * per gpio specific registers. The bitmapped registers are in chunks of
182 * 3 x 32bit registers to cover all 95 GPIOs
183 *
184 * per gpio specific registers consist of two 32bit registers per gpio
185 * (LP_CONFIG1 and LP_CONFIG2), with 95 GPIOs there's a total of
186 * 190 config registers.
187 *
188 * A simplified view of the register layout look like this:
189 *
190 * LP_ACPI_OWNED[31:0] gpio ownerships for gpios 0-31 (bitmapped registers)
191 * LP_ACPI_OWNED[63:32] gpio ownerships for gpios 32-63
192 * LP_ACPI_OWNED[94:64] gpio ownerships for gpios 63-94
193 * ...
194 * LP_INT_ENABLE[31:0] ...
195 * LP_INT_ENABLE[63:32] ...
196 * LP_INT_ENABLE[94:64] ...
197 * LP0_CONFIG1 (gpio 0) config1 reg for gpio 0 (per gpio registers)
198 * LP0_CONFIG2 (gpio 0) config2 reg for gpio 0
199 * LP1_CONFIG1 (gpio 1) config1 reg for gpio 1
200 * LP1_CONFIG2 (gpio 1) config2 reg for gpio 1
201 * LP2_CONFIG1 (gpio 2) ...
202 * LP2_CONFIG2 (gpio 2) ...
203 * ...
204 * LP94_CONFIG1 (gpio 94) ...
205 * LP94_CONFIG2 (gpio 94) ...
206 *
207 * IOxAPIC redirection map applies only for gpio 8-10, 13-14, 45-55.
208 */
209
lp_gpio_reg(struct gpio_chip * chip,unsigned int offset,int reg)210 static void __iomem *lp_gpio_reg(struct gpio_chip *chip, unsigned int offset,
211 int reg)
212 {
213 struct intel_pinctrl *lg = gpiochip_get_data(chip);
214 const struct intel_community *comm;
215 int reg_offset;
216
217 comm = intel_get_community(lg, offset);
218 if (!comm)
219 return NULL;
220
221 offset -= comm->pin_base;
222
223 if (reg == LP_CONFIG1 || reg == LP_CONFIG2)
224 /* per gpio specific config registers */
225 reg_offset = offset * 8;
226 else
227 /* bitmapped registers */
228 reg_offset = (offset / 32) * 4;
229
230 return comm->regs + reg_offset + reg;
231 }
232
lp_gpio_acpi_use(struct intel_pinctrl * lg,unsigned int pin)233 static bool lp_gpio_acpi_use(struct intel_pinctrl *lg, unsigned int pin)
234 {
235 void __iomem *acpi_use;
236
237 acpi_use = lp_gpio_reg(&lg->chip, pin, LP_ACPI_OWNED);
238 if (!acpi_use)
239 return true;
240
241 return !(ioread32(acpi_use) & BIT(pin % 32));
242 }
243
lp_gpio_ioxapic_use(struct gpio_chip * chip,unsigned int offset)244 static bool lp_gpio_ioxapic_use(struct gpio_chip *chip, unsigned int offset)
245 {
246 void __iomem *ioxapic_use = lp_gpio_reg(chip, offset, LP_IRQ2IOXAPIC);
247 u32 value;
248
249 value = ioread32(ioxapic_use);
250
251 if (offset >= 8 && offset <= 10)
252 return !!(value & BIT(offset - 8 + 0));
253 if (offset >= 13 && offset <= 14)
254 return !!(value & BIT(offset - 13 + 3));
255 if (offset >= 45 && offset <= 55)
256 return !!(value & BIT(offset - 45 + 5));
257
258 return false;
259 }
260
lp_pin_dbg_show(struct pinctrl_dev * pctldev,struct seq_file * s,unsigned int pin)261 static void lp_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
262 unsigned int pin)
263 {
264 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
265 void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1);
266 void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
267 u32 value, mode;
268
269 value = ioread32(reg);
270
271 mode = value & USE_SEL_MASK;
272 if (mode == USE_SEL_GPIO)
273 seq_puts(s, "GPIO ");
274 else
275 seq_printf(s, "mode %d ", mode);
276
277 seq_printf(s, "0x%08x 0x%08x", value, ioread32(conf2));
278
279 if (lp_gpio_acpi_use(lg, pin))
280 seq_puts(s, " [ACPI]");
281 }
282
283 static const struct pinctrl_ops lptlp_pinctrl_ops = {
284 .get_groups_count = intel_get_groups_count,
285 .get_group_name = intel_get_group_name,
286 .get_group_pins = intel_get_group_pins,
287 .pin_dbg_show = lp_pin_dbg_show,
288 };
289
lp_pinmux_set_mux(struct pinctrl_dev * pctldev,unsigned int function,unsigned int group)290 static int lp_pinmux_set_mux(struct pinctrl_dev *pctldev,
291 unsigned int function, unsigned int group)
292 {
293 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
294 const struct intel_pingroup *grp = &lg->soc->groups[group];
295 int i;
296
297 guard(raw_spinlock_irqsave)(&lg->lock);
298
299 /* Now enable the mux setting for each pin in the group */
300 for (i = 0; i < grp->grp.npins; i++) {
301 void __iomem *reg = lp_gpio_reg(&lg->chip, grp->grp.pins[i], LP_CONFIG1);
302 u32 value;
303
304 value = ioread32(reg);
305
306 value &= ~USE_SEL_MASK;
307 if (grp->modes)
308 value |= grp->modes[i];
309 else
310 value |= grp->mode;
311
312 iowrite32(value, reg);
313 }
314
315 return 0;
316 }
317
lp_gpio_enable_input(void __iomem * reg)318 static void lp_gpio_enable_input(void __iomem *reg)
319 {
320 iowrite32(ioread32(reg) & ~GPINDIS_BIT, reg);
321 }
322
lp_gpio_disable_input(void __iomem * reg)323 static void lp_gpio_disable_input(void __iomem *reg)
324 {
325 iowrite32(ioread32(reg) | GPINDIS_BIT, reg);
326 }
327
lp_gpio_request_enable(struct pinctrl_dev * pctldev,struct pinctrl_gpio_range * range,unsigned int pin)328 static int lp_gpio_request_enable(struct pinctrl_dev *pctldev,
329 struct pinctrl_gpio_range *range,
330 unsigned int pin)
331 {
332 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
333 void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1);
334 void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
335 u32 value;
336
337 guard(raw_spinlock_irqsave)(&lg->lock);
338
339 /*
340 * Reconfigure pin to GPIO mode if needed and issue a warning,
341 * since we expect firmware to configure it properly.
342 */
343 value = ioread32(reg);
344 if ((value & USE_SEL_MASK) != USE_SEL_GPIO) {
345 iowrite32((value & USE_SEL_MASK) | USE_SEL_GPIO, reg);
346 dev_warn(lg->dev, FW_BUG "pin %u forcibly reconfigured as GPIO\n", pin);
347 }
348
349 /* Enable input sensing */
350 lp_gpio_enable_input(conf2);
351
352 return 0;
353 }
354
lp_gpio_disable_free(struct pinctrl_dev * pctldev,struct pinctrl_gpio_range * range,unsigned int pin)355 static void lp_gpio_disable_free(struct pinctrl_dev *pctldev,
356 struct pinctrl_gpio_range *range,
357 unsigned int pin)
358 {
359 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
360 void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
361
362 guard(raw_spinlock_irqsave)(&lg->lock);
363
364 /* Disable input sensing */
365 lp_gpio_disable_input(conf2);
366 }
367
lp_gpio_set_direction(struct pinctrl_dev * pctldev,struct pinctrl_gpio_range * range,unsigned int pin,bool input)368 static int lp_gpio_set_direction(struct pinctrl_dev *pctldev,
369 struct pinctrl_gpio_range *range,
370 unsigned int pin, bool input)
371 {
372 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
373 void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1);
374 u32 value;
375
376 guard(raw_spinlock_irqsave)(&lg->lock);
377
378 value = ioread32(reg);
379 value &= ~DIR_BIT;
380 if (input) {
381 value |= DIR_BIT;
382 } else {
383 /*
384 * Before making any direction modifications, do a check if GPIO
385 * is set for direct IRQ. On Lynxpoint, setting GPIO to output
386 * does not make sense, so let's at least warn the caller before
387 * they shoot themselves in the foot.
388 */
389 WARN(lp_gpio_ioxapic_use(&lg->chip, pin),
390 "Potential Error: Setting GPIO to output with IOxAPIC redirection");
391 }
392 iowrite32(value, reg);
393
394 return 0;
395 }
396
397 static const struct pinmux_ops lptlp_pinmux_ops = {
398 .get_functions_count = intel_get_functions_count,
399 .get_function_name = intel_get_function_name,
400 .get_function_groups = intel_get_function_groups,
401 .set_mux = lp_pinmux_set_mux,
402 .gpio_request_enable = lp_gpio_request_enable,
403 .gpio_disable_free = lp_gpio_disable_free,
404 .gpio_set_direction = lp_gpio_set_direction,
405 };
406
lp_pin_config_get(struct pinctrl_dev * pctldev,unsigned int pin,unsigned long * config)407 static int lp_pin_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
408 unsigned long *config)
409 {
410 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
411 void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
412 enum pin_config_param param = pinconf_to_config_param(*config);
413 u32 value, pull;
414 u16 arg;
415
416 scoped_guard(raw_spinlock_irqsave, &lg->lock)
417 value = ioread32(conf2);
418
419 pull = value & GPIWP_MASK;
420
421 switch (param) {
422 case PIN_CONFIG_BIAS_DISABLE:
423 if (pull != GPIWP_NONE)
424 return -EINVAL;
425 arg = 0;
426 break;
427 case PIN_CONFIG_BIAS_PULL_DOWN:
428 if (pull != GPIWP_DOWN)
429 return -EINVAL;
430
431 arg = 1;
432 break;
433 case PIN_CONFIG_BIAS_PULL_UP:
434 if (pull != GPIWP_UP)
435 return -EINVAL;
436
437 arg = 1;
438 break;
439 default:
440 return -ENOTSUPP;
441 }
442
443 *config = pinconf_to_config_packed(param, arg);
444
445 return 0;
446 }
447
lp_pin_config_set(struct pinctrl_dev * pctldev,unsigned int pin,unsigned long * configs,unsigned int num_configs)448 static int lp_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
449 unsigned long *configs, unsigned int num_configs)
450 {
451 struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev);
452 void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2);
453 enum pin_config_param param;
454 unsigned int i;
455 u32 value;
456
457 guard(raw_spinlock_irqsave)(&lg->lock);
458
459 value = ioread32(conf2);
460
461 for (i = 0; i < num_configs; i++) {
462 param = pinconf_to_config_param(configs[i]);
463
464 switch (param) {
465 case PIN_CONFIG_BIAS_DISABLE:
466 value &= ~GPIWP_MASK;
467 value |= GPIWP_NONE;
468 break;
469 case PIN_CONFIG_BIAS_PULL_DOWN:
470 value &= ~GPIWP_MASK;
471 value |= GPIWP_DOWN;
472 break;
473 case PIN_CONFIG_BIAS_PULL_UP:
474 value &= ~GPIWP_MASK;
475 value |= GPIWP_UP;
476 break;
477 default:
478 return -ENOTSUPP;
479 }
480 }
481
482 iowrite32(value, conf2);
483
484 return 0;
485 }
486
487 static const struct pinconf_ops lptlp_pinconf_ops = {
488 .is_generic = true,
489 .pin_config_get = lp_pin_config_get,
490 .pin_config_set = lp_pin_config_set,
491 };
492
493 static const struct pinctrl_desc lptlp_pinctrl_desc = {
494 .pctlops = &lptlp_pinctrl_ops,
495 .pmxops = &lptlp_pinmux_ops,
496 .confops = &lptlp_pinconf_ops,
497 .owner = THIS_MODULE,
498 };
499
lp_gpio_get(struct gpio_chip * chip,unsigned int offset)500 static int lp_gpio_get(struct gpio_chip *chip, unsigned int offset)
501 {
502 void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
503 return !!(ioread32(reg) & IN_LVL_BIT);
504 }
505
lp_gpio_set(struct gpio_chip * chip,unsigned int offset,int value)506 static void lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
507 {
508 struct intel_pinctrl *lg = gpiochip_get_data(chip);
509 void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
510
511 guard(raw_spinlock_irqsave)(&lg->lock);
512
513 if (value)
514 iowrite32(ioread32(reg) | OUT_LVL_BIT, reg);
515 else
516 iowrite32(ioread32(reg) & ~OUT_LVL_BIT, reg);
517 }
518
lp_gpio_direction_input(struct gpio_chip * chip,unsigned int offset)519 static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
520 {
521 return pinctrl_gpio_direction_input(chip, offset);
522 }
523
lp_gpio_direction_output(struct gpio_chip * chip,unsigned int offset,int value)524 static int lp_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
525 int value)
526 {
527 lp_gpio_set(chip, offset, value);
528
529 return pinctrl_gpio_direction_output(chip, offset);
530 }
531
lp_gpio_get_direction(struct gpio_chip * chip,unsigned int offset)532 static int lp_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
533 {
534 void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
535
536 if (ioread32(reg) & DIR_BIT)
537 return GPIO_LINE_DIRECTION_IN;
538
539 return GPIO_LINE_DIRECTION_OUT;
540 }
541
lp_gpio_irq_handler(struct irq_desc * desc)542 static void lp_gpio_irq_handler(struct irq_desc *desc)
543 {
544 struct irq_data *data = irq_desc_get_irq_data(desc);
545 struct gpio_chip *gc = irq_desc_get_handler_data(desc);
546 struct intel_pinctrl *lg = gpiochip_get_data(gc);
547 struct irq_chip *chip = irq_data_get_irq_chip(data);
548 void __iomem *reg, *ena;
549 unsigned long pending;
550 u32 base, pin;
551
552 /* check from GPIO controller which pin triggered the interrupt */
553 for (base = 0; base < lg->chip.ngpio; base += 32) {
554 reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT);
555 ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE);
556
557 /* Only interrupts that are enabled */
558 pending = ioread32(reg) & ioread32(ena);
559
560 for_each_set_bit(pin, &pending, 32)
561 generic_handle_domain_irq(lg->chip.irq.domain, base + pin);
562 }
563 chip->irq_eoi(data);
564 }
565
lp_irq_ack(struct irq_data * d)566 static void lp_irq_ack(struct irq_data *d)
567 {
568 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
569 struct intel_pinctrl *lg = gpiochip_get_data(gc);
570 irq_hw_number_t hwirq = irqd_to_hwirq(d);
571 void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_STAT);
572
573 guard(raw_spinlock_irqsave)(&lg->lock);
574
575 iowrite32(BIT(hwirq % 32), reg);
576 }
577
lp_irq_unmask(struct irq_data * d)578 static void lp_irq_unmask(struct irq_data *d)
579 {
580 }
581
lp_irq_mask(struct irq_data * d)582 static void lp_irq_mask(struct irq_data *d)
583 {
584 }
585
lp_irq_enable(struct irq_data * d)586 static void lp_irq_enable(struct irq_data *d)
587 {
588 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
589 struct intel_pinctrl *lg = gpiochip_get_data(gc);
590 irq_hw_number_t hwirq = irqd_to_hwirq(d);
591 void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE);
592
593 gpiochip_enable_irq(gc, hwirq);
594
595 scoped_guard(raw_spinlock_irqsave, &lg->lock)
596 iowrite32(ioread32(reg) | BIT(hwirq % 32), reg);
597 }
598
lp_irq_disable(struct irq_data * d)599 static void lp_irq_disable(struct irq_data *d)
600 {
601 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
602 struct intel_pinctrl *lg = gpiochip_get_data(gc);
603 irq_hw_number_t hwirq = irqd_to_hwirq(d);
604 void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE);
605
606 scoped_guard(raw_spinlock_irqsave, &lg->lock)
607 iowrite32(ioread32(reg) & ~BIT(hwirq % 32), reg);
608
609 gpiochip_disable_irq(gc, hwirq);
610 }
611
lp_irq_set_type(struct irq_data * d,unsigned int type)612 static int lp_irq_set_type(struct irq_data *d, unsigned int type)
613 {
614 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
615 struct intel_pinctrl *lg = gpiochip_get_data(gc);
616 irq_hw_number_t hwirq = irqd_to_hwirq(d);
617 void __iomem *reg;
618 u32 value;
619
620 reg = lp_gpio_reg(&lg->chip, hwirq, LP_CONFIG1);
621 if (!reg)
622 return -EINVAL;
623
624 /* Fail if BIOS reserved pin for ACPI use */
625 if (lp_gpio_acpi_use(lg, hwirq)) {
626 dev_err(lg->dev, "pin %lu can't be used as IRQ\n", hwirq);
627 return -EBUSY;
628 }
629
630 guard(raw_spinlock_irqsave)(&lg->lock);
631
632 value = ioread32(reg);
633
634 /* set both TRIG_SEL and INV bits to 0 for rising edge */
635 if (type & IRQ_TYPE_EDGE_RISING)
636 value &= ~(TRIG_SEL_BIT | INT_INV_BIT);
637
638 /* TRIG_SEL bit 0, INV bit 1 for falling edge */
639 if (type & IRQ_TYPE_EDGE_FALLING)
640 value = (value | INT_INV_BIT) & ~TRIG_SEL_BIT;
641
642 /* TRIG_SEL bit 1, INV bit 0 for level low */
643 if (type & IRQ_TYPE_LEVEL_LOW)
644 value = (value | TRIG_SEL_BIT) & ~INT_INV_BIT;
645
646 /* TRIG_SEL bit 1, INV bit 1 for level high */
647 if (type & IRQ_TYPE_LEVEL_HIGH)
648 value |= TRIG_SEL_BIT | INT_INV_BIT;
649
650 iowrite32(value, reg);
651
652 if (type & IRQ_TYPE_EDGE_BOTH)
653 irq_set_handler_locked(d, handle_edge_irq);
654 else if (type & IRQ_TYPE_LEVEL_MASK)
655 irq_set_handler_locked(d, handle_level_irq);
656
657 return 0;
658 }
659
660 static const struct irq_chip lp_irqchip = {
661 .name = "LP-GPIO",
662 .irq_ack = lp_irq_ack,
663 .irq_mask = lp_irq_mask,
664 .irq_unmask = lp_irq_unmask,
665 .irq_enable = lp_irq_enable,
666 .irq_disable = lp_irq_disable,
667 .irq_set_type = lp_irq_set_type,
668 .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
669 GPIOCHIP_IRQ_RESOURCE_HELPERS,
670 };
671
lp_gpio_irq_init_hw(struct gpio_chip * chip)672 static int lp_gpio_irq_init_hw(struct gpio_chip *chip)
673 {
674 struct intel_pinctrl *lg = gpiochip_get_data(chip);
675 void __iomem *reg;
676 unsigned int base;
677
678 for (base = 0; base < lg->chip.ngpio; base += 32) {
679 /* disable gpio pin interrupts */
680 reg = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE);
681 iowrite32(0, reg);
682 /* Clear interrupt status register */
683 reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT);
684 iowrite32(0xffffffff, reg);
685 }
686
687 return 0;
688 }
689
lp_gpio_add_pin_ranges(struct gpio_chip * chip)690 static int lp_gpio_add_pin_ranges(struct gpio_chip *chip)
691 {
692 struct intel_pinctrl *lg = gpiochip_get_data(chip);
693 struct device *dev = lg->dev;
694 int ret;
695
696 ret = gpiochip_add_pin_range(chip, dev_name(dev), 0, 0, lg->soc->npins);
697 if (ret)
698 dev_err(dev, "failed to add GPIO pin range\n");
699
700 return ret;
701 }
702
lp_gpio_probe(struct platform_device * pdev)703 static int lp_gpio_probe(struct platform_device *pdev)
704 {
705 const struct intel_pinctrl_soc_data *soc;
706 struct intel_pinctrl *lg;
707 struct gpio_chip *gc;
708 struct device *dev = &pdev->dev;
709 struct resource *io_rc;
710 void __iomem *regs;
711 unsigned int i;
712 int irq, ret;
713
714 soc = (const struct intel_pinctrl_soc_data *)device_get_match_data(dev);
715 if (!soc)
716 return -ENODEV;
717
718 lg = devm_kzalloc(dev, sizeof(*lg), GFP_KERNEL);
719 if (!lg)
720 return -ENOMEM;
721
722 lg->dev = dev;
723 lg->soc = soc;
724
725 lg->ncommunities = lg->soc->ncommunities;
726 lg->communities = devm_kcalloc(dev, lg->ncommunities,
727 sizeof(*lg->communities), GFP_KERNEL);
728 if (!lg->communities)
729 return -ENOMEM;
730
731 lg->pctldesc = lptlp_pinctrl_desc;
732 lg->pctldesc.name = dev_name(dev);
733 lg->pctldesc.pins = lg->soc->pins;
734 lg->pctldesc.npins = lg->soc->npins;
735
736 lg->pctldev = devm_pinctrl_register(dev, &lg->pctldesc, lg);
737 if (IS_ERR(lg->pctldev)) {
738 dev_err(dev, "failed to register pinctrl driver\n");
739 return PTR_ERR(lg->pctldev);
740 }
741
742 platform_set_drvdata(pdev, lg);
743
744 io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0);
745 if (!io_rc) {
746 dev_err(dev, "missing IO resources\n");
747 return -EINVAL;
748 }
749
750 regs = devm_ioport_map(dev, io_rc->start, resource_size(io_rc));
751 if (!regs) {
752 dev_err(dev, "failed mapping IO region %pR\n", &io_rc);
753 return -EBUSY;
754 }
755
756 for (i = 0; i < lg->soc->ncommunities; i++) {
757 struct intel_community *comm = &lg->communities[i];
758
759 *comm = lg->soc->communities[i];
760
761 comm->regs = regs;
762 comm->pad_regs = regs + 0x100;
763 }
764
765 raw_spin_lock_init(&lg->lock);
766
767 gc = &lg->chip;
768 gc->label = dev_name(dev);
769 gc->owner = THIS_MODULE;
770 gc->request = gpiochip_generic_request;
771 gc->free = gpiochip_generic_free;
772 gc->direction_input = lp_gpio_direction_input;
773 gc->direction_output = lp_gpio_direction_output;
774 gc->get = lp_gpio_get;
775 gc->set = lp_gpio_set;
776 gc->set_config = gpiochip_generic_config;
777 gc->get_direction = lp_gpio_get_direction;
778 gc->base = -1;
779 gc->ngpio = LP_NUM_GPIO;
780 gc->can_sleep = false;
781 gc->add_pin_ranges = lp_gpio_add_pin_ranges;
782 gc->parent = dev;
783
784 /* set up interrupts */
785 irq = platform_get_irq_optional(pdev, 0);
786 if (irq > 0) {
787 struct gpio_irq_chip *girq;
788
789 girq = &gc->irq;
790 gpio_irq_chip_set_chip(girq, &lp_irqchip);
791 girq->init_hw = lp_gpio_irq_init_hw;
792 girq->parent_handler = lp_gpio_irq_handler;
793 girq->num_parents = 1;
794 girq->parents = devm_kcalloc(dev, girq->num_parents,
795 sizeof(*girq->parents),
796 GFP_KERNEL);
797 if (!girq->parents)
798 return -ENOMEM;
799 girq->parents[0] = irq;
800 girq->default_type = IRQ_TYPE_NONE;
801 girq->handler = handle_bad_irq;
802 }
803
804 ret = devm_gpiochip_add_data(dev, gc, lg);
805 if (ret) {
806 dev_err(dev, "failed adding lp-gpio chip\n");
807 return ret;
808 }
809
810 return 0;
811 }
812
lp_gpio_resume(struct device * dev)813 static int lp_gpio_resume(struct device *dev)
814 {
815 struct intel_pinctrl *lg = dev_get_drvdata(dev);
816 struct gpio_chip *chip = &lg->chip;
817 const char *dummy;
818 int i;
819
820 /* on some hardware suspend clears input sensing, re-enable it here */
821 for_each_requested_gpio(chip, i, dummy)
822 lp_gpio_enable_input(lp_gpio_reg(chip, i, LP_CONFIG2));
823
824 return 0;
825 }
826
827 static DEFINE_SIMPLE_DEV_PM_OPS(lp_gpio_pm_ops, NULL, lp_gpio_resume);
828
829 static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = {
830 { "INT33C7", (kernel_ulong_t)&lptlp_soc_data },
831 { "INT3437", (kernel_ulong_t)&lptlp_soc_data },
832 { }
833 };
834 MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match);
835
836 static struct platform_driver lp_gpio_driver = {
837 .probe = lp_gpio_probe,
838 .driver = {
839 .name = "lp_gpio",
840 .pm = pm_sleep_ptr(&lp_gpio_pm_ops),
841 .acpi_match_table = lynxpoint_gpio_acpi_match,
842 },
843 };
844
lp_gpio_init(void)845 static int __init lp_gpio_init(void)
846 {
847 return platform_driver_register(&lp_gpio_driver);
848 }
849 subsys_initcall(lp_gpio_init);
850
lp_gpio_exit(void)851 static void __exit lp_gpio_exit(void)
852 {
853 platform_driver_unregister(&lp_gpio_driver);
854 }
855 module_exit(lp_gpio_exit);
856
857 MODULE_AUTHOR("Mathias Nyman (Intel)");
858 MODULE_AUTHOR("Andy Shevchenko (Intel)");
859 MODULE_DESCRIPTION("Intel Lynxpoint pinctrl driver");
860 MODULE_LICENSE("GPL v2");
861 MODULE_ALIAS("platform:lp_gpio");
862 MODULE_IMPORT_NS("PINCTRL_INTEL");
863