xref: /linux/drivers/thermal/loongson2_thermal.c (revision 621cde16e49b3ecf7d59a8106a20aaebfb4a59a9)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Author: zhanghongchen <zhanghongchen@loongson.cn>
4  *         Yinbo Zhu <zhuyinbo@loongson.cn>
5  * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
6  */
7 
8 #include <linux/interrupt.h>
9 #include <linux/io.h>
10 #include <linux/minmax.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/property.h>
15 #include <linux/thermal.h>
16 #include <linux/units.h>
17 
18 #include "thermal_hwmon.h"
19 
20 #define LOONGSON2_MAX_SENSOR_SEL_NUM	3
21 
22 #define LOONGSON2_THSENS_CTRL_HI_REG	0x0
23 #define LOONGSON2_THSENS_CTRL_LOW_REG	0x8
24 #define LOONGSON2_THSENS_STATUS_REG	0x10
25 #define LOONGSON2_THSENS_OUT_REG	0x14
26 
27 #define LOONGSON2_THSENS_INT_LO		BIT(0)
28 #define LOONGSON2_THSENS_INT_HIGH	BIT(1)
29 #define LOONGSON2_THSENS_INT_EN		(LOONGSON2_THSENS_INT_LO | \
30 					 LOONGSON2_THSENS_INT_HIGH)
31 #define LOONGSON2_THSENS_OUT_MASK	0xFF
32 
33 /*
34  * This flag is used to indicate the temperature reading
35  * method of the Loongson-2K2000
36  */
37 #define LS2K2000_THSENS_OUT_FLAG	BIT(0)
38 
39 struct loongson2_thermal_chip_data {
40 	unsigned int thermal_sensor_sel;
41 	unsigned int flags;
42 };
43 
44 struct loongson2_thermal_data {
45 	void __iomem *ctrl_reg;
46 	void __iomem *temp_reg;
47 	const struct loongson2_thermal_chip_data *chip_data;
48 };
49 
loongson2_set_ctrl_regs(struct loongson2_thermal_data * data,int ctrl_data,bool low,bool enable)50 static void loongson2_set_ctrl_regs(struct loongson2_thermal_data *data,
51 				    int ctrl_data, bool low, bool enable)
52 {
53 	int reg_ctrl = 0;
54 	int reg_off  = data->chip_data->thermal_sensor_sel * 2;
55 	int ctrl_reg = low ? LOONGSON2_THSENS_CTRL_LOW_REG : LOONGSON2_THSENS_CTRL_HI_REG;
56 
57 	reg_ctrl = ctrl_data + HECTO;
58 	reg_ctrl |= enable ? 0x100 : 0;
59 	writew(reg_ctrl, data->ctrl_reg + ctrl_reg + reg_off);
60 }
61 
loongson2_thermal_set(struct loongson2_thermal_data * data,int low,int high,bool enable)62 static int loongson2_thermal_set(struct loongson2_thermal_data *data,
63 				 int low, int high, bool enable)
64 {
65 	/* Set low temperature threshold */
66 	loongson2_set_ctrl_regs(data, clamp(-40, low, high), true, enable);
67 
68 	/* Set high temperature threshold */
69 	loongson2_set_ctrl_regs(data, clamp(125, low, high), false, enable);
70 
71 	return 0;
72 }
73 
loongson2_2k1000_get_temp(struct thermal_zone_device * tz,int * temp)74 static int loongson2_2k1000_get_temp(struct thermal_zone_device *tz, int *temp)
75 {
76 	int val;
77 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
78 
79 	val = readl(data->ctrl_reg + LOONGSON2_THSENS_OUT_REG);
80 	*temp = ((val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
81 
82 	return 0;
83 }
84 
loongson2_2k2000_get_temp(struct thermal_zone_device * tz,int * temp)85 static int loongson2_2k2000_get_temp(struct thermal_zone_device *tz, int *temp)
86 {
87 	int val;
88 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
89 
90 	val = readl(data->temp_reg);
91 	*temp = ((val & 0xffff) * 820 / 0x4000 - 311) * KILO;
92 
93 	return 0;
94 }
95 
loongson2_thermal_irq_thread(int irq,void * dev)96 static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
97 {
98 	struct thermal_zone_device *tzd = dev;
99 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
100 
101 	writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
102 
103 	thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
104 
105 	return IRQ_HANDLED;
106 }
107 
loongson2_thermal_set_trips(struct thermal_zone_device * tz,int low,int high)108 static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
109 {
110 	struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
111 
112 	return loongson2_thermal_set(data, low/MILLI, high/MILLI, true);
113 }
114 
115 static struct thermal_zone_device_ops loongson2_of_thermal_ops = {
116 	.get_temp = loongson2_2k1000_get_temp,
117 	.set_trips = loongson2_thermal_set_trips,
118 };
119 
loongson2_thermal_probe(struct platform_device * pdev)120 static int loongson2_thermal_probe(struct platform_device *pdev)
121 {
122 	struct device *dev = &pdev->dev;
123 	struct loongson2_thermal_data *data;
124 	struct thermal_zone_device *tzd;
125 	int ret, irq, i;
126 
127 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
128 	if (!data)
129 		return -ENOMEM;
130 
131 	data->chip_data = device_get_match_data(dev);
132 
133 	data->ctrl_reg = devm_platform_ioremap_resource(pdev, 0);
134 	if (IS_ERR(data->ctrl_reg))
135 		return PTR_ERR(data->ctrl_reg);
136 
137 	/* The temperature output register is separate for Loongson-2K2000 */
138 	if (data->chip_data->flags & LS2K2000_THSENS_OUT_FLAG) {
139 		data->temp_reg = devm_platform_ioremap_resource(pdev, 1);
140 		if (IS_ERR(data->temp_reg))
141 			return PTR_ERR(data->temp_reg);
142 
143 		loongson2_of_thermal_ops.get_temp = loongson2_2k2000_get_temp;
144 	}
145 
146 	irq = platform_get_irq(pdev, 0);
147 	if (irq < 0)
148 		return irq;
149 
150 	writeb(LOONGSON2_THSENS_INT_EN, data->ctrl_reg + LOONGSON2_THSENS_STATUS_REG);
151 
152 	loongson2_thermal_set(data, 0, 0, false);
153 
154 	for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) {
155 		tzd = devm_thermal_of_zone_register(dev, i, data,
156 						    &loongson2_of_thermal_ops);
157 
158 		if (!IS_ERR(tzd))
159 			break;
160 
161 		if (PTR_ERR(tzd) != -ENODEV)
162 			continue;
163 
164 		return dev_err_probe(dev, PTR_ERR(tzd), "failed to register");
165 	}
166 
167 	ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread,
168 					IRQF_ONESHOT, "loongson2_thermal", tzd);
169 	if (ret < 0)
170 		return dev_err_probe(dev, ret, "failed to request alarm irq\n");
171 
172 	devm_thermal_add_hwmon_sysfs(dev, tzd);
173 
174 	return 0;
175 }
176 
177 static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
178 	.thermal_sensor_sel = 0,
179 	.flags = 0,
180 };
181 
182 static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k2000_data = {
183 	.thermal_sensor_sel = 0,
184 	.flags = LS2K2000_THSENS_OUT_FLAG,
185 };
186 
187 static const struct of_device_id of_loongson2_thermal_match[] = {
188 	{
189 		.compatible = "loongson,ls2k1000-thermal",
190 		.data = &loongson2_thermal_ls2k1000_data,
191 	},
192 	{
193 		.compatible = "loongson,ls2k2000-thermal",
194 		.data = &loongson2_thermal_ls2k2000_data,
195 	},
196 	{ /* end */ }
197 };
198 MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);
199 
200 static struct platform_driver loongson2_thermal_driver = {
201 	.driver = {
202 		.name		= "loongson2_thermal",
203 		.of_match_table = of_loongson2_thermal_match,
204 	},
205 	.probe	= loongson2_thermal_probe,
206 };
207 module_platform_driver(loongson2_thermal_driver);
208 
209 MODULE_DESCRIPTION("Loongson2 thermal driver");
210 MODULE_AUTHOR("Loongson Technology Corporation Limited");
211 MODULE_LICENSE("GPL");
212