1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Support for LGDT3302 and LGDT3303 - VSB/QAM
4 *
5 * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
6 */
7
8 /*
9 * NOTES ABOUT THIS DRIVER
10 *
11 * This Linux driver supports:
12 * DViCO FusionHDTV 3 Gold-Q
13 * DViCO FusionHDTV 3 Gold-T
14 * DViCO FusionHDTV 5 Gold
15 * DViCO FusionHDTV 5 Lite
16 * DViCO FusionHDTV 5 USB Gold
17 * Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
18 * pcHDTV HD5500
19 *
20 */
21
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/delay.h>
26 #include <linux/string.h>
27 #include <linux/slab.h>
28 #include <asm/byteorder.h>
29
30 #include <media/dvb_frontend.h>
31 #include <linux/int_log.h>
32 #include "lgdt330x_priv.h"
33 #include "lgdt330x.h"
34
35 /* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
36 /* #define USE_EQMSE */
37
38 static int debug;
39 module_param(debug, int, 0644);
40 MODULE_PARM_DESC(debug, "Turn on/off lgdt330x frontend debugging (default:off).");
41
42 #define dprintk(state, fmt, arg...) do { \
43 if (debug) \
44 dev_printk(KERN_DEBUG, &state->client->dev, fmt, ##arg);\
45 } while (0)
46
47 struct lgdt330x_state {
48 struct i2c_client *client;
49
50 /* Configuration settings */
51 struct lgdt330x_config config;
52
53 struct dvb_frontend frontend;
54
55 /* Demodulator private data */
56 enum fe_modulation current_modulation;
57 u32 snr; /* Result of last SNR calculation */
58 u16 ucblocks;
59 unsigned long last_stats_time;
60
61 /* Tuner private data */
62 u32 current_frequency;
63 };
64
i2c_write_demod_bytes(struct lgdt330x_state * state,const u8 * buf,int len)65 static int i2c_write_demod_bytes(struct lgdt330x_state *state,
66 const u8 *buf, /* data bytes to send */
67 int len /* number of bytes to send */)
68 {
69 int i;
70 int err;
71
72 for (i = 0; i < len - 1; i += 2) {
73 err = i2c_master_send(state->client, buf, 2);
74 if (err != 2) {
75 dev_warn(&state->client->dev,
76 "%s: error (addr %02x <- %02x, err = %i)\n",
77 __func__, buf[0], buf[1], err);
78 if (err < 0)
79 return err;
80 else
81 return -EREMOTEIO;
82 }
83 buf += 2;
84 }
85 return 0;
86 }
87
88 /*
89 * This routine writes the register (reg) to the demod bus
90 * then reads the data returned for (len) bytes.
91 */
i2c_read_demod_bytes(struct lgdt330x_state * state,enum I2C_REG reg,u8 * buf,int len)92 static int i2c_read_demod_bytes(struct lgdt330x_state *state,
93 enum I2C_REG reg, u8 *buf, int len)
94 {
95 u8 wr[] = { reg };
96 struct i2c_msg msg[] = {
97 {
98 .addr = state->client->addr,
99 .flags = 0,
100 .buf = wr,
101 .len = 1
102 }, {
103 .addr = state->client->addr,
104 .flags = I2C_M_RD,
105 .buf = buf,
106 .len = len
107 },
108 };
109 int ret;
110
111 ret = i2c_transfer(state->client->adapter, msg, 2);
112 if (ret != 2) {
113 dev_warn(&state->client->dev,
114 "%s: addr 0x%02x select 0x%02x error (ret == %i)\n",
115 __func__, state->client->addr, reg, ret);
116 if (ret >= 0)
117 ret = -EIO;
118 } else {
119 ret = 0;
120 }
121 return ret;
122 }
123
124 /* Software reset */
lgdt3302_sw_reset(struct lgdt330x_state * state)125 static int lgdt3302_sw_reset(struct lgdt330x_state *state)
126 {
127 u8 ret;
128 u8 reset[] = {
129 IRQ_MASK,
130 /*
131 * bit 6 is active low software reset
132 * bits 5-0 are 1 to mask interrupts
133 */
134 0x00
135 };
136
137 ret = i2c_write_demod_bytes(state,
138 reset, sizeof(reset));
139 if (ret == 0) {
140 /* force reset high (inactive) and unmask interrupts */
141 reset[1] = 0x7f;
142 ret = i2c_write_demod_bytes(state,
143 reset, sizeof(reset));
144 }
145 return ret;
146 }
147
lgdt3303_sw_reset(struct lgdt330x_state * state)148 static int lgdt3303_sw_reset(struct lgdt330x_state *state)
149 {
150 u8 ret;
151 u8 reset[] = {
152 0x02,
153 0x00 /* bit 0 is active low software reset */
154 };
155
156 ret = i2c_write_demod_bytes(state,
157 reset, sizeof(reset));
158 if (ret == 0) {
159 /* force reset high (inactive) */
160 reset[1] = 0x01;
161 ret = i2c_write_demod_bytes(state,
162 reset, sizeof(reset));
163 }
164 return ret;
165 }
166
lgdt330x_sw_reset(struct lgdt330x_state * state)167 static int lgdt330x_sw_reset(struct lgdt330x_state *state)
168 {
169 switch (state->config.demod_chip) {
170 case LGDT3302:
171 return lgdt3302_sw_reset(state);
172 case LGDT3303:
173 return lgdt3303_sw_reset(state);
174 default:
175 return -ENODEV;
176 }
177 }
178
lgdt330x_init(struct dvb_frontend * fe)179 static int lgdt330x_init(struct dvb_frontend *fe)
180 {
181 struct lgdt330x_state *state = fe->demodulator_priv;
182 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
183 char *chip_name;
184 int err;
185 /*
186 * Array of byte pairs <address, value>
187 * to initialize each different chip
188 */
189 static const u8 lgdt3302_init_data[] = {
190 /* Use 50MHz param values from spec sheet since xtal is 50 */
191 /*
192 * Change the value of NCOCTFV[25:0] of carrier
193 * recovery center frequency register
194 */
195 VSB_CARRIER_FREQ0, 0x00,
196 VSB_CARRIER_FREQ1, 0x87,
197 VSB_CARRIER_FREQ2, 0x8e,
198 VSB_CARRIER_FREQ3, 0x01,
199 /*
200 * Change the TPCLK pin polarity
201 * data is valid on falling clock
202 */
203 DEMUX_CONTROL, 0xfb,
204 /*
205 * Change the value of IFBW[11:0] of
206 * AGC IF/RF loop filter bandwidth register
207 */
208 AGC_RF_BANDWIDTH0, 0x40,
209 AGC_RF_BANDWIDTH1, 0x93,
210 AGC_RF_BANDWIDTH2, 0x00,
211 /*
212 * Change the value of bit 6, 'nINAGCBY' and
213 * 'NSSEL[1:0] of ACG function control register 2
214 */
215 AGC_FUNC_CTRL2, 0xc6,
216 /*
217 * Change the value of bit 6 'RFFIX'
218 * of AGC function control register 3
219 */
220 AGC_FUNC_CTRL3, 0x40,
221 /*
222 * Set the value of 'INLVTHD' register 0x2a/0x2c
223 * to 0x7fe
224 */
225 AGC_DELAY0, 0x07,
226 AGC_DELAY2, 0xfe,
227 /*
228 * Change the value of IAGCBW[15:8]
229 * of inner AGC loop filter bandwidth
230 */
231 AGC_LOOP_BANDWIDTH0, 0x08,
232 AGC_LOOP_BANDWIDTH1, 0x9a
233 };
234 static const u8 lgdt3303_init_data[] = {
235 0x4c, 0x14
236 };
237 static const u8 flip_1_lgdt3303_init_data[] = {
238 0x4c, 0x14,
239 0x87, 0xf3
240 };
241 static const u8 flip_2_lgdt3303_init_data[] = {
242 0x4c, 0x14,
243 0x87, 0xda
244 };
245
246 /*
247 * Hardware reset is done using gpio[0] of cx23880x chip.
248 * I'd like to do it here, but don't know how to find chip address.
249 * cx88-cards.c arranges for the reset bit to be inactive (high).
250 * Maybe there needs to be a callable function in cx88-core or
251 * the caller of this function needs to do it.
252 */
253
254 switch (state->config.demod_chip) {
255 case LGDT3302:
256 chip_name = "LGDT3302";
257 err = i2c_write_demod_bytes(state, lgdt3302_init_data,
258 sizeof(lgdt3302_init_data));
259 break;
260 case LGDT3303:
261 chip_name = "LGDT3303";
262 switch (state->config.clock_polarity_flip) {
263 case 2:
264 err = i2c_write_demod_bytes(state,
265 flip_2_lgdt3303_init_data,
266 sizeof(flip_2_lgdt3303_init_data));
267 break;
268 case 1:
269 err = i2c_write_demod_bytes(state,
270 flip_1_lgdt3303_init_data,
271 sizeof(flip_1_lgdt3303_init_data));
272 break;
273 case 0:
274 default:
275 err = i2c_write_demod_bytes(state, lgdt3303_init_data,
276 sizeof(lgdt3303_init_data));
277 }
278 break;
279 default:
280 chip_name = "undefined";
281 dev_warn(&state->client->dev,
282 "Only LGDT3302 and LGDT3303 are supported chips.\n");
283 err = -ENODEV;
284 }
285 dprintk(state, "Initialized the %s chip\n", chip_name);
286 if (err < 0)
287 return err;
288
289 p->cnr.len = 1;
290 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
291 p->block_error.len = 1;
292 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
293 p->block_count.len = 1;
294 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
295 state->last_stats_time = 0;
296
297 return lgdt330x_sw_reset(state);
298 }
299
lgdt330x_read_ucblocks(struct dvb_frontend * fe,u32 * ucblocks)300 static int lgdt330x_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
301 {
302 struct lgdt330x_state *state = fe->demodulator_priv;
303
304 *ucblocks = state->ucblocks;
305
306 return 0;
307 }
308
lgdt330x_set_parameters(struct dvb_frontend * fe)309 static int lgdt330x_set_parameters(struct dvb_frontend *fe)
310 {
311 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
312 struct lgdt330x_state *state = fe->demodulator_priv;
313 /*
314 * Array of byte pairs <address, value>
315 * to initialize 8VSB for lgdt3303 chip 50 MHz IF
316 */
317 static const u8 lgdt3303_8vsb_44_data[] = {
318 0x04, 0x00,
319 0x0d, 0x40,
320 0x0e, 0x87,
321 0x0f, 0x8e,
322 0x10, 0x01,
323 0x47, 0x8b
324 };
325 /*
326 * Array of byte pairs <address, value>
327 * to initialize QAM for lgdt3303 chip
328 */
329 static const u8 lgdt3303_qam_data[] = {
330 0x04, 0x00,
331 0x0d, 0x00,
332 0x0e, 0x00,
333 0x0f, 0x00,
334 0x10, 0x00,
335 0x51, 0x63,
336 0x47, 0x66,
337 0x48, 0x66,
338 0x4d, 0x1a,
339 0x49, 0x08,
340 0x4a, 0x9b
341 };
342 u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 };
343
344 int err = 0;
345 /* Change only if we are actually changing the modulation */
346 if (state->current_modulation != p->modulation) {
347 switch (p->modulation) {
348 case VSB_8:
349 dprintk(state, "VSB_8 MODE\n");
350
351 /* Select VSB mode */
352 top_ctrl_cfg[1] = 0x03;
353
354 /* Select ANT connector if supported by card */
355 if (state->config.pll_rf_set)
356 state->config.pll_rf_set(fe, 1);
357
358 if (state->config.demod_chip == LGDT3303) {
359 err = i2c_write_demod_bytes(state,
360 lgdt3303_8vsb_44_data,
361 sizeof(lgdt3303_8vsb_44_data));
362 }
363 break;
364
365 case QAM_64:
366 dprintk(state, "QAM_64 MODE\n");
367
368 /* Select QAM_64 mode */
369 top_ctrl_cfg[1] = 0x00;
370
371 /* Select CABLE connector if supported by card */
372 if (state->config.pll_rf_set)
373 state->config.pll_rf_set(fe, 0);
374
375 if (state->config.demod_chip == LGDT3303) {
376 err = i2c_write_demod_bytes(state,
377 lgdt3303_qam_data,
378 sizeof(lgdt3303_qam_data));
379 }
380 break;
381
382 case QAM_256:
383 dprintk(state, "QAM_256 MODE\n");
384
385 /* Select QAM_256 mode */
386 top_ctrl_cfg[1] = 0x01;
387
388 /* Select CABLE connector if supported by card */
389 if (state->config.pll_rf_set)
390 state->config.pll_rf_set(fe, 0);
391
392 if (state->config.demod_chip == LGDT3303) {
393 err = i2c_write_demod_bytes(state,
394 lgdt3303_qam_data,
395 sizeof(lgdt3303_qam_data));
396 }
397 break;
398 default:
399 dev_warn(&state->client->dev,
400 "%s: Modulation type(%d) UNSUPPORTED\n",
401 __func__, p->modulation);
402 return -1;
403 }
404 if (err < 0)
405 dev_warn(&state->client->dev,
406 "%s: error blasting bytes to lgdt3303 for modulation type(%d)\n",
407 __func__, p->modulation);
408
409 /*
410 * select serial or parallel MPEG hardware interface
411 * Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303
412 * Parallel: 0x00
413 */
414 top_ctrl_cfg[1] |= state->config.serial_mpeg;
415
416 /* Select the requested mode */
417 i2c_write_demod_bytes(state, top_ctrl_cfg,
418 sizeof(top_ctrl_cfg));
419 if (state->config.set_ts_params)
420 state->config.set_ts_params(fe, 0);
421 state->current_modulation = p->modulation;
422 }
423
424 /* Tune to the specified frequency */
425 if (fe->ops.tuner_ops.set_params) {
426 fe->ops.tuner_ops.set_params(fe);
427 if (fe->ops.i2c_gate_ctrl)
428 fe->ops.i2c_gate_ctrl(fe, 0);
429 }
430
431 /* Keep track of the new frequency */
432 /*
433 * FIXME this is the wrong way to do this...
434 * The tuner is shared with the video4linux analog API
435 */
436 state->current_frequency = p->frequency;
437
438 lgdt330x_sw_reset(state);
439 return 0;
440 }
441
lgdt330x_get_frontend(struct dvb_frontend * fe,struct dtv_frontend_properties * p)442 static int lgdt330x_get_frontend(struct dvb_frontend *fe,
443 struct dtv_frontend_properties *p)
444 {
445 struct lgdt330x_state *state = fe->demodulator_priv;
446
447 p->frequency = state->current_frequency;
448 return 0;
449 }
450
451 /*
452 * Calculate SNR estimation (scaled by 2^24)
453 *
454 * 8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
455 * equations from LGDT3303 datasheet. VSB is the same between the '02
456 * and '03, so maybe QAM is too? Perhaps someone with a newer datasheet
457 * that has QAM information could verify?
458 *
459 * For 8-VSB: (two ways, take your pick)
460 * LGDT3302:
461 * SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
462 * LGDT3303:
463 * SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
464 * LGDT3302 & LGDT3303:
465 * SNR_PT = 10 * log10(25 * 32^2 / PT_MSE) (we use this one)
466 * For 64-QAM:
467 * SNR = 10 * log10( 688128 / MSEQAM)
468 * For 256-QAM:
469 * SNR = 10 * log10( 696320 / MSEQAM)
470 *
471 * We re-write the snr equation as:
472 * SNR * 2^24 = 10*(c - intlog10(MSE))
473 * Where for 256-QAM, c = log10(696320) * 2^24, and so on.
474 */
calculate_snr(u32 mse,u32 c)475 static u32 calculate_snr(u32 mse, u32 c)
476 {
477 if (mse == 0) /* No signal */
478 return 0;
479
480 mse = intlog10(mse);
481 if (mse > c) {
482 /*
483 * Negative SNR, which is possible, but realisticly the
484 * demod will lose lock before the signal gets this bad.
485 * The API only allows for unsigned values, so just return 0
486 */
487 return 0;
488 }
489 return 10 * (c - mse);
490 }
491
lgdt3302_read_snr(struct dvb_frontend * fe)492 static int lgdt3302_read_snr(struct dvb_frontend *fe)
493 {
494 struct lgdt330x_state *state = fe->demodulator_priv;
495 u8 buf[5]; /* read data buffer */
496 u32 noise; /* noise value */
497 u32 c; /* per-modulation SNR calculation constant */
498
499 switch (state->current_modulation) {
500 case VSB_8:
501 i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
502 #ifdef USE_EQMSE
503 /* Use Equalizer Mean-Square Error Register */
504 /* SNR for ranges from -15.61 to +41.58 */
505 noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
506 c = 69765745; /* log10(25*24^2)*2^24 */
507 #else
508 /* Use Phase Tracker Mean-Square Error Register */
509 /* SNR for ranges from -13.11 to +44.08 */
510 noise = ((buf[0] & 7 << 3) << 13) | (buf[3] << 8) | buf[4];
511 c = 73957994; /* log10(25*32^2)*2^24 */
512 #endif
513 break;
514 case QAM_64:
515 case QAM_256:
516 i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
517 noise = ((buf[0] & 3) << 8) | buf[1];
518 c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
519 /* log10(688128)*2^24 and log10(696320)*2^24 */
520 break;
521 default:
522 dev_err(&state->client->dev,
523 "%s: Modulation set to unsupported value\n",
524 __func__);
525
526 state->snr = 0;
527
528 return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
529 }
530
531 state->snr = calculate_snr(noise, c);
532
533 dprintk(state, "noise = 0x%08x, snr = %d.%02d dB\n", noise,
534 state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
535
536 return 0;
537 }
538
lgdt3303_read_snr(struct dvb_frontend * fe)539 static int lgdt3303_read_snr(struct dvb_frontend *fe)
540 {
541 struct lgdt330x_state *state = fe->demodulator_priv;
542 u8 buf[5]; /* read data buffer */
543 u32 noise; /* noise value */
544 u32 c; /* per-modulation SNR calculation constant */
545
546 switch (state->current_modulation) {
547 case VSB_8:
548 i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
549 #ifdef USE_EQMSE
550 /* Use Equalizer Mean-Square Error Register */
551 /* SNR for ranges from -16.12 to +44.08 */
552 noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
553 c = 73957994; /* log10(25*32^2)*2^24 */
554 #else
555 /* Use Phase Tracker Mean-Square Error Register */
556 /* SNR for ranges from -13.11 to +44.08 */
557 noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
558 c = 73957994; /* log10(25*32^2)*2^24 */
559 #endif
560 break;
561 case QAM_64:
562 case QAM_256:
563 i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
564 noise = (buf[0] << 8) | buf[1];
565 c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
566 /* log10(688128)*2^24 and log10(696320)*2^24 */
567 break;
568 default:
569 dev_err(&state->client->dev,
570 "%s: Modulation set to unsupported value\n",
571 __func__);
572 state->snr = 0;
573 return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
574 }
575
576 state->snr = calculate_snr(noise, c);
577
578 dprintk(state, "noise = 0x%08x, snr = %d.%02d dB\n", noise,
579 state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
580
581 return 0;
582 }
583
lgdt330x_read_snr(struct dvb_frontend * fe,u16 * snr)584 static int lgdt330x_read_snr(struct dvb_frontend *fe, u16 *snr)
585 {
586 struct lgdt330x_state *state = fe->demodulator_priv;
587
588 *snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
589
590 return 0;
591 }
592
lgdt330x_read_signal_strength(struct dvb_frontend * fe,u16 * strength)593 static int lgdt330x_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
594 {
595 /* Calculate Strength from SNR up to 35dB */
596 /*
597 * Even though the SNR can go higher than 35dB, there is some comfort
598 * factor in having a range of strong signals that can show at 100%
599 */
600 struct lgdt330x_state *state = fe->demodulator_priv;
601 u16 snr;
602 int ret;
603
604 ret = fe->ops.read_snr(fe, &snr);
605 if (ret != 0)
606 return ret;
607 /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
608 /* scale the range 0 - 35*2^24 into 0 - 65535 */
609 if (state->snr >= 8960 * 0x10000)
610 *strength = 0xffff;
611 else
612 *strength = state->snr / 8960;
613
614 return 0;
615 }
616
617
lgdt3302_read_status(struct dvb_frontend * fe,enum fe_status * status)618 static int lgdt3302_read_status(struct dvb_frontend *fe,
619 enum fe_status *status)
620 {
621 struct lgdt330x_state *state = fe->demodulator_priv;
622 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
623 u8 buf[3];
624 int err;
625
626 *status = 0; /* Reset status result */
627
628 /* AGC status register */
629 i2c_read_demod_bytes(state, AGC_STATUS, buf, 1);
630 dprintk(state, "AGC_STATUS = 0x%02x\n", buf[0]);
631 if ((buf[0] & 0x0c) == 0x8) {
632 /*
633 * Test signal does not exist flag
634 * as well as the AGC lock flag.
635 */
636 *status |= FE_HAS_SIGNAL;
637 }
638
639 /*
640 * You must set the Mask bits to 1 in the IRQ_MASK in order
641 * to see that status bit in the IRQ_STATUS register.
642 * This is done in SwReset();
643 */
644
645 /* signal status */
646 i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf));
647 dprintk(state,
648 "TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n",
649 buf[0], buf[1], buf[2]);
650
651 /* sync status */
652 if ((buf[2] & 0x03) == 0x01)
653 *status |= FE_HAS_SYNC;
654
655 /* FEC error status */
656 if ((buf[2] & 0x0c) == 0x08)
657 *status |= FE_HAS_LOCK | FE_HAS_VITERBI;
658
659 /* Carrier Recovery Lock Status Register */
660 i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
661 dprintk(state, "CARRIER_LOCK = 0x%02x\n", buf[0]);
662 switch (state->current_modulation) {
663 case QAM_256:
664 case QAM_64:
665 /* Need to understand why there are 3 lock levels here */
666 if ((buf[0] & 0x07) == 0x07)
667 *status |= FE_HAS_CARRIER;
668 break;
669 case VSB_8:
670 if ((buf[0] & 0x80) == 0x80)
671 *status |= FE_HAS_CARRIER;
672 break;
673 default:
674 dev_warn(&state->client->dev,
675 "%s: Modulation set to unsupported value\n",
676 __func__);
677 }
678
679 if (!(*status & FE_HAS_LOCK)) {
680 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
681 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
682 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
683 return 0;
684 }
685
686 if (state->last_stats_time &&
687 time_is_after_jiffies(state->last_stats_time))
688 return 0;
689
690 state->last_stats_time = jiffies + msecs_to_jiffies(1000);
691
692 err = lgdt3302_read_snr(fe);
693 if (!err) {
694 p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
695 p->cnr.stat[0].svalue = (((u64)state->snr) * 1000) >> 24;
696 } else {
697 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
698 }
699
700 err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
701 buf, sizeof(buf));
702 if (!err) {
703 state->ucblocks = (buf[0] << 8) | buf[1];
704
705 dprintk(state, "UCB = 0x%02x\n", state->ucblocks);
706
707 p->block_error.stat[0].uvalue += state->ucblocks;
708 /* FIXME: what's the basis for block count */
709 p->block_count.stat[0].uvalue += 10000;
710
711 p->block_error.stat[0].scale = FE_SCALE_COUNTER;
712 p->block_count.stat[0].scale = FE_SCALE_COUNTER;
713 } else {
714 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
715 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
716 }
717
718 return 0;
719 }
720
lgdt3303_read_status(struct dvb_frontend * fe,enum fe_status * status)721 static int lgdt3303_read_status(struct dvb_frontend *fe,
722 enum fe_status *status)
723 {
724 struct lgdt330x_state *state = fe->demodulator_priv;
725 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
726 u8 buf[3];
727 int err;
728
729 *status = 0; /* Reset status result */
730
731 /* lgdt3303 AGC status register */
732 err = i2c_read_demod_bytes(state, 0x58, buf, 1);
733 if (err < 0)
734 return err;
735
736 dprintk(state, "AGC_STATUS = 0x%02x\n", buf[0]);
737 if ((buf[0] & 0x21) == 0x01) {
738 /*
739 * Test input signal does not exist flag
740 * as well as the AGC lock flag.
741 */
742 *status |= FE_HAS_SIGNAL;
743 }
744
745 /* Carrier Recovery Lock Status Register */
746 i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
747 dprintk(state, "CARRIER_LOCK = 0x%02x\n", buf[0]);
748 switch (state->current_modulation) {
749 case QAM_256:
750 case QAM_64:
751 /* Need to understand why there are 3 lock levels here */
752 if ((buf[0] & 0x07) == 0x07)
753 *status |= FE_HAS_CARRIER;
754 else
755 break;
756 i2c_read_demod_bytes(state, 0x8a, buf, 1);
757 dprintk(state, "QAM LOCK = 0x%02x\n", buf[0]);
758
759 if ((buf[0] & 0x04) == 0x04)
760 *status |= FE_HAS_SYNC;
761 if ((buf[0] & 0x01) == 0x01)
762 *status |= FE_HAS_LOCK;
763 if ((buf[0] & 0x08) == 0x08)
764 *status |= FE_HAS_VITERBI;
765 break;
766 case VSB_8:
767 if ((buf[0] & 0x80) == 0x80)
768 *status |= FE_HAS_CARRIER;
769 else
770 break;
771 i2c_read_demod_bytes(state, 0x38, buf, 1);
772 dprintk(state, "8-VSB LOCK = 0x%02x\n", buf[0]);
773
774 if ((buf[0] & 0x02) == 0x00)
775 *status |= FE_HAS_SYNC;
776 if ((buf[0] & 0x01) == 0x01)
777 *status |= FE_HAS_VITERBI | FE_HAS_LOCK;
778 break;
779 default:
780 dev_warn(&state->client->dev,
781 "%s: Modulation set to unsupported value\n",
782 __func__);
783 }
784
785 if (!(*status & FE_HAS_LOCK)) {
786 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
787 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
788 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
789 return 0;
790 }
791
792 if (state->last_stats_time &&
793 time_is_after_jiffies(state->last_stats_time))
794 return 0;
795
796 state->last_stats_time = jiffies + msecs_to_jiffies(1000);
797
798 err = lgdt3303_read_snr(fe);
799 if (!err) {
800 p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
801 p->cnr.stat[0].svalue = (((u64)state->snr) * 1000) >> 24;
802 } else {
803 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
804 }
805
806 err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
807 buf, sizeof(buf));
808 if (!err) {
809 state->ucblocks = (buf[0] << 8) | buf[1];
810
811 dprintk(state, "UCB = 0x%02x\n", state->ucblocks);
812
813 p->block_error.stat[0].uvalue += state->ucblocks;
814 /* FIXME: what's the basis for block count */
815 p->block_count.stat[0].uvalue += 10000;
816
817 p->block_error.stat[0].scale = FE_SCALE_COUNTER;
818 p->block_count.stat[0].scale = FE_SCALE_COUNTER;
819 } else {
820 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
821 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
822 }
823
824 return 0;
825 }
826
827 static int
lgdt330x_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * fe_tune_settings)828 lgdt330x_get_tune_settings(struct dvb_frontend *fe,
829 struct dvb_frontend_tune_settings *fe_tune_settings)
830 {
831 /* I have no idea about this - it may not be needed */
832 fe_tune_settings->min_delay_ms = 500;
833 fe_tune_settings->step_size = 0;
834 fe_tune_settings->max_drift = 0;
835 return 0;
836 }
837
lgdt330x_release(struct dvb_frontend * fe)838 static void lgdt330x_release(struct dvb_frontend *fe)
839 {
840 struct lgdt330x_state *state = fe->demodulator_priv;
841 struct i2c_client *client = state->client;
842
843 dev_dbg(&client->dev, "\n");
844
845 i2c_unregister_device(client);
846 }
847
lgdt330x_get_dvb_frontend(struct i2c_client * client)848 static struct dvb_frontend *lgdt330x_get_dvb_frontend(struct i2c_client *client)
849 {
850 struct lgdt330x_state *state = i2c_get_clientdata(client);
851
852 dev_dbg(&client->dev, "\n");
853
854 return &state->frontend;
855 }
856
857 static const struct dvb_frontend_ops lgdt3302_ops;
858 static const struct dvb_frontend_ops lgdt3303_ops;
859
lgdt330x_probe(struct i2c_client * client)860 static int lgdt330x_probe(struct i2c_client *client)
861 {
862 struct lgdt330x_state *state = NULL;
863 u8 buf[1];
864
865 /* Allocate memory for the internal state */
866 state = kzalloc(sizeof(*state), GFP_KERNEL);
867 if (!state)
868 goto error;
869
870 /* Setup the state */
871 memcpy(&state->config, client->dev.platform_data,
872 sizeof(state->config));
873 i2c_set_clientdata(client, state);
874 state->client = client;
875
876 /* Create dvb_frontend */
877 switch (state->config.demod_chip) {
878 case LGDT3302:
879 memcpy(&state->frontend.ops, &lgdt3302_ops,
880 sizeof(struct dvb_frontend_ops));
881 break;
882 case LGDT3303:
883 memcpy(&state->frontend.ops, &lgdt3303_ops,
884 sizeof(struct dvb_frontend_ops));
885 break;
886 default:
887 goto error;
888 }
889 state->frontend.demodulator_priv = state;
890
891 /* Setup get frontend callback */
892 state->config.get_dvb_frontend = lgdt330x_get_dvb_frontend;
893
894 /* Verify communication with demod chip */
895 if (i2c_read_demod_bytes(state, 2, buf, 1))
896 goto error;
897
898 state->current_frequency = -1;
899 state->current_modulation = -1;
900
901 dev_info(&state->client->dev,
902 "Demod loaded for LGDT330%s chip\n",
903 state->config.demod_chip == LGDT3302 ? "2" : "3");
904
905 return 0;
906
907 error:
908 kfree(state);
909 if (debug)
910 dev_printk(KERN_DEBUG, &client->dev, "Error loading lgdt330x driver\n");
911 return -ENODEV;
912 }
lgdt330x_attach(const struct lgdt330x_config * _config,u8 demod_address,struct i2c_adapter * i2c)913 struct dvb_frontend *lgdt330x_attach(const struct lgdt330x_config *_config,
914 u8 demod_address,
915 struct i2c_adapter *i2c)
916 {
917 struct i2c_client *client;
918 struct i2c_board_info board_info = {};
919 struct lgdt330x_config config = *_config;
920
921 strscpy(board_info.type, "lgdt330x", sizeof(board_info.type));
922 board_info.addr = demod_address;
923 board_info.platform_data = &config;
924 client = i2c_new_client_device(i2c, &board_info);
925 if (!i2c_client_has_driver(client))
926 return NULL;
927
928 return lgdt330x_get_dvb_frontend(client);
929 }
930 EXPORT_SYMBOL_GPL(lgdt330x_attach);
931
932 static const struct dvb_frontend_ops lgdt3302_ops = {
933 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
934 .info = {
935 .name = "LG Electronics LGDT3302 VSB/QAM Frontend",
936 .frequency_min_hz = 54 * MHz,
937 .frequency_max_hz = 858 * MHz,
938 .frequency_stepsize_hz = 62500,
939 .symbol_rate_min = 5056941, /* QAM 64 */
940 .symbol_rate_max = 10762000, /* VSB 8 */
941 .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
942 },
943 .init = lgdt330x_init,
944 .set_frontend = lgdt330x_set_parameters,
945 .get_frontend = lgdt330x_get_frontend,
946 .get_tune_settings = lgdt330x_get_tune_settings,
947 .read_status = lgdt3302_read_status,
948 .read_signal_strength = lgdt330x_read_signal_strength,
949 .read_snr = lgdt330x_read_snr,
950 .read_ucblocks = lgdt330x_read_ucblocks,
951 .release = lgdt330x_release,
952 };
953
954 static const struct dvb_frontend_ops lgdt3303_ops = {
955 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
956 .info = {
957 .name = "LG Electronics LGDT3303 VSB/QAM Frontend",
958 .frequency_min_hz = 54 * MHz,
959 .frequency_max_hz = 858 * MHz,
960 .frequency_stepsize_hz = 62500,
961 .symbol_rate_min = 5056941, /* QAM 64 */
962 .symbol_rate_max = 10762000, /* VSB 8 */
963 .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
964 },
965 .init = lgdt330x_init,
966 .set_frontend = lgdt330x_set_parameters,
967 .get_frontend = lgdt330x_get_frontend,
968 .get_tune_settings = lgdt330x_get_tune_settings,
969 .read_status = lgdt3303_read_status,
970 .read_signal_strength = lgdt330x_read_signal_strength,
971 .read_snr = lgdt330x_read_snr,
972 .read_ucblocks = lgdt330x_read_ucblocks,
973 .release = lgdt330x_release,
974 };
975
lgdt330x_remove(struct i2c_client * client)976 static void lgdt330x_remove(struct i2c_client *client)
977 {
978 struct lgdt330x_state *state = i2c_get_clientdata(client);
979
980 dev_dbg(&client->dev, "\n");
981
982 kfree(state);
983 }
984
985 static const struct i2c_device_id lgdt330x_id_table[] = {
986 { "lgdt330x" },
987 {}
988 };
989 MODULE_DEVICE_TABLE(i2c, lgdt330x_id_table);
990
991 static struct i2c_driver lgdt330x_driver = {
992 .driver = {
993 .name = "lgdt330x",
994 .suppress_bind_attrs = true,
995 },
996 .probe = lgdt330x_probe,
997 .remove = lgdt330x_remove,
998 .id_table = lgdt330x_id_table,
999 };
1000
1001 module_i2c_driver(lgdt330x_driver);
1002
1003
1004 MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
1005 MODULE_AUTHOR("Wilson Michaels");
1006 MODULE_LICENSE("GPL");
1007