1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Microchip switch driver main logic
4 *
5 * Copyright (C) 2017-2024 Microchip Technology Inc.
6 */
7
8 #include <linux/delay.h>
9 #include <linux/dsa/ksz_common.h>
10 #include <linux/export.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/platform_data/microchip-ksz.h>
15 #include <linux/phy.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_bridge.h>
18 #include <linux/if_vlan.h>
19 #include <linux/if_hsr.h>
20 #include <linux/irq.h>
21 #include <linux/irqdomain.h>
22 #include <linux/of.h>
23 #include <linux/of_mdio.h>
24 #include <linux/of_net.h>
25 #include <linux/micrel_phy.h>
26 #include <net/dsa.h>
27 #include <net/ieee8021q.h>
28 #include <net/pkt_cls.h>
29 #include <net/switchdev.h>
30
31 #include "ksz_common.h"
32 #include "ksz_dcb.h"
33 #include "ksz_ptp.h"
34 #include "ksz8.h"
35 #include "ksz9477.h"
36 #include "lan937x.h"
37
38 #define MIB_COUNTER_NUM 0x20
39
40 struct ksz_stats_raw {
41 u64 rx_hi;
42 u64 rx_undersize;
43 u64 rx_fragments;
44 u64 rx_oversize;
45 u64 rx_jabbers;
46 u64 rx_symbol_err;
47 u64 rx_crc_err;
48 u64 rx_align_err;
49 u64 rx_mac_ctrl;
50 u64 rx_pause;
51 u64 rx_bcast;
52 u64 rx_mcast;
53 u64 rx_ucast;
54 u64 rx_64_or_less;
55 u64 rx_65_127;
56 u64 rx_128_255;
57 u64 rx_256_511;
58 u64 rx_512_1023;
59 u64 rx_1024_1522;
60 u64 rx_1523_2000;
61 u64 rx_2001;
62 u64 tx_hi;
63 u64 tx_late_col;
64 u64 tx_pause;
65 u64 tx_bcast;
66 u64 tx_mcast;
67 u64 tx_ucast;
68 u64 tx_deferred;
69 u64 tx_total_col;
70 u64 tx_exc_col;
71 u64 tx_single_col;
72 u64 tx_mult_col;
73 u64 rx_total;
74 u64 tx_total;
75 u64 rx_discards;
76 u64 tx_discards;
77 };
78
79 struct ksz88xx_stats_raw {
80 u64 rx;
81 u64 rx_hi;
82 u64 rx_undersize;
83 u64 rx_fragments;
84 u64 rx_oversize;
85 u64 rx_jabbers;
86 u64 rx_symbol_err;
87 u64 rx_crc_err;
88 u64 rx_align_err;
89 u64 rx_mac_ctrl;
90 u64 rx_pause;
91 u64 rx_bcast;
92 u64 rx_mcast;
93 u64 rx_ucast;
94 u64 rx_64_or_less;
95 u64 rx_65_127;
96 u64 rx_128_255;
97 u64 rx_256_511;
98 u64 rx_512_1023;
99 u64 rx_1024_1522;
100 u64 tx;
101 u64 tx_hi;
102 u64 tx_late_col;
103 u64 tx_pause;
104 u64 tx_bcast;
105 u64 tx_mcast;
106 u64 tx_ucast;
107 u64 tx_deferred;
108 u64 tx_total_col;
109 u64 tx_exc_col;
110 u64 tx_single_col;
111 u64 tx_mult_col;
112 u64 rx_discards;
113 u64 tx_discards;
114 };
115
116 static const struct ksz_mib_names ksz88xx_mib_names[] = {
117 { 0x00, "rx" },
118 { 0x01, "rx_hi" },
119 { 0x02, "rx_undersize" },
120 { 0x03, "rx_fragments" },
121 { 0x04, "rx_oversize" },
122 { 0x05, "rx_jabbers" },
123 { 0x06, "rx_symbol_err" },
124 { 0x07, "rx_crc_err" },
125 { 0x08, "rx_align_err" },
126 { 0x09, "rx_mac_ctrl" },
127 { 0x0a, "rx_pause" },
128 { 0x0b, "rx_bcast" },
129 { 0x0c, "rx_mcast" },
130 { 0x0d, "rx_ucast" },
131 { 0x0e, "rx_64_or_less" },
132 { 0x0f, "rx_65_127" },
133 { 0x10, "rx_128_255" },
134 { 0x11, "rx_256_511" },
135 { 0x12, "rx_512_1023" },
136 { 0x13, "rx_1024_1522" },
137 { 0x14, "tx" },
138 { 0x15, "tx_hi" },
139 { 0x16, "tx_late_col" },
140 { 0x17, "tx_pause" },
141 { 0x18, "tx_bcast" },
142 { 0x19, "tx_mcast" },
143 { 0x1a, "tx_ucast" },
144 { 0x1b, "tx_deferred" },
145 { 0x1c, "tx_total_col" },
146 { 0x1d, "tx_exc_col" },
147 { 0x1e, "tx_single_col" },
148 { 0x1f, "tx_mult_col" },
149 { 0x100, "rx_discards" },
150 { 0x101, "tx_discards" },
151 };
152
153 static const struct ksz_mib_names ksz9477_mib_names[] = {
154 { 0x00, "rx_hi" },
155 { 0x01, "rx_undersize" },
156 { 0x02, "rx_fragments" },
157 { 0x03, "rx_oversize" },
158 { 0x04, "rx_jabbers" },
159 { 0x05, "rx_symbol_err" },
160 { 0x06, "rx_crc_err" },
161 { 0x07, "rx_align_err" },
162 { 0x08, "rx_mac_ctrl" },
163 { 0x09, "rx_pause" },
164 { 0x0A, "rx_bcast" },
165 { 0x0B, "rx_mcast" },
166 { 0x0C, "rx_ucast" },
167 { 0x0D, "rx_64_or_less" },
168 { 0x0E, "rx_65_127" },
169 { 0x0F, "rx_128_255" },
170 { 0x10, "rx_256_511" },
171 { 0x11, "rx_512_1023" },
172 { 0x12, "rx_1024_1522" },
173 { 0x13, "rx_1523_2000" },
174 { 0x14, "rx_2001" },
175 { 0x15, "tx_hi" },
176 { 0x16, "tx_late_col" },
177 { 0x17, "tx_pause" },
178 { 0x18, "tx_bcast" },
179 { 0x19, "tx_mcast" },
180 { 0x1A, "tx_ucast" },
181 { 0x1B, "tx_deferred" },
182 { 0x1C, "tx_total_col" },
183 { 0x1D, "tx_exc_col" },
184 { 0x1E, "tx_single_col" },
185 { 0x1F, "tx_mult_col" },
186 { 0x80, "rx_total" },
187 { 0x81, "tx_total" },
188 { 0x82, "rx_discards" },
189 { 0x83, "tx_discards" },
190 };
191
192 struct ksz_driver_strength_prop {
193 const char *name;
194 int offset;
195 int value;
196 };
197
198 enum ksz_driver_strength_type {
199 KSZ_DRIVER_STRENGTH_HI,
200 KSZ_DRIVER_STRENGTH_LO,
201 KSZ_DRIVER_STRENGTH_IO,
202 };
203
204 /**
205 * struct ksz_drive_strength - drive strength mapping
206 * @reg_val: register value
207 * @microamp: microamp value
208 */
209 struct ksz_drive_strength {
210 u32 reg_val;
211 u32 microamp;
212 };
213
214 /* ksz9477_drive_strengths - Drive strength mapping for KSZ9477 variants
215 *
216 * This values are not documented in KSZ9477 variants but confirmed by
217 * Microchip that KSZ9477, KSZ9567, KSZ8567, KSZ9897, KSZ9896, KSZ9563, KSZ9893
218 * and KSZ8563 are using same register (drive strength) settings like KSZ8795.
219 *
220 * Documentation in KSZ8795CLX provides more information with some
221 * recommendations:
222 * - for high speed signals
223 * 1. 4 mA or 8 mA is often used for MII, RMII, and SPI interface with using
224 * 2.5V or 3.3V VDDIO.
225 * 2. 12 mA or 16 mA is often used for MII, RMII, and SPI interface with
226 * using 1.8V VDDIO.
227 * 3. 20 mA or 24 mA is often used for GMII/RGMII interface with using 2.5V
228 * or 3.3V VDDIO.
229 * 4. 28 mA is often used for GMII/RGMII interface with using 1.8V VDDIO.
230 * 5. In same interface, the heavy loading should use higher one of the
231 * drive current strength.
232 * - for low speed signals
233 * 1. 3.3V VDDIO, use either 4 mA or 8 mA.
234 * 2. 2.5V VDDIO, use either 8 mA or 12 mA.
235 * 3. 1.8V VDDIO, use either 12 mA or 16 mA.
236 * 4. If it is heavy loading, can use higher drive current strength.
237 */
238 static const struct ksz_drive_strength ksz9477_drive_strengths[] = {
239 { SW_DRIVE_STRENGTH_2MA, 2000 },
240 { SW_DRIVE_STRENGTH_4MA, 4000 },
241 { SW_DRIVE_STRENGTH_8MA, 8000 },
242 { SW_DRIVE_STRENGTH_12MA, 12000 },
243 { SW_DRIVE_STRENGTH_16MA, 16000 },
244 { SW_DRIVE_STRENGTH_20MA, 20000 },
245 { SW_DRIVE_STRENGTH_24MA, 24000 },
246 { SW_DRIVE_STRENGTH_28MA, 28000 },
247 };
248
249 /* ksz88x3_drive_strengths - Drive strength mapping for KSZ8863, KSZ8873, ..
250 * variants.
251 * This values are documented in KSZ8873 and KSZ8863 datasheets.
252 */
253 static const struct ksz_drive_strength ksz88x3_drive_strengths[] = {
254 { 0, 8000 },
255 { KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
256 };
257
258 static void ksz88x3_phylink_mac_config(struct phylink_config *config,
259 unsigned int mode,
260 const struct phylink_link_state *state);
261 static void ksz_phylink_mac_config(struct phylink_config *config,
262 unsigned int mode,
263 const struct phylink_link_state *state);
264 static void ksz_phylink_mac_link_down(struct phylink_config *config,
265 unsigned int mode,
266 phy_interface_t interface);
267
268 static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = {
269 .mac_config = ksz88x3_phylink_mac_config,
270 .mac_link_down = ksz_phylink_mac_link_down,
271 .mac_link_up = ksz8_phylink_mac_link_up,
272 };
273
274 static const struct phylink_mac_ops ksz8_phylink_mac_ops = {
275 .mac_config = ksz_phylink_mac_config,
276 .mac_link_down = ksz_phylink_mac_link_down,
277 .mac_link_up = ksz8_phylink_mac_link_up,
278 };
279
280 static const struct ksz_dev_ops ksz88xx_dev_ops = {
281 .setup = ksz8_setup,
282 .get_port_addr = ksz8_get_port_addr,
283 .cfg_port_member = ksz8_cfg_port_member,
284 .flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
285 .port_setup = ksz8_port_setup,
286 .r_phy = ksz8_r_phy,
287 .w_phy = ksz8_w_phy,
288 .r_mib_cnt = ksz8_r_mib_cnt,
289 .r_mib_pkt = ksz8_r_mib_pkt,
290 .r_mib_stat64 = ksz88xx_r_mib_stats64,
291 .freeze_mib = ksz8_freeze_mib,
292 .port_init_cnt = ksz8_port_init_cnt,
293 .fdb_dump = ksz8_fdb_dump,
294 .fdb_add = ksz8_fdb_add,
295 .fdb_del = ksz8_fdb_del,
296 .mdb_add = ksz8_mdb_add,
297 .mdb_del = ksz8_mdb_del,
298 .vlan_filtering = ksz8_port_vlan_filtering,
299 .vlan_add = ksz8_port_vlan_add,
300 .vlan_del = ksz8_port_vlan_del,
301 .mirror_add = ksz8_port_mirror_add,
302 .mirror_del = ksz8_port_mirror_del,
303 .get_caps = ksz8_get_caps,
304 .config_cpu_port = ksz8_config_cpu_port,
305 .enable_stp_addr = ksz8_enable_stp_addr,
306 .reset = ksz8_reset_switch,
307 .init = ksz8_switch_init,
308 .exit = ksz8_switch_exit,
309 .change_mtu = ksz8_change_mtu,
310 .pme_write8 = ksz8_pme_write8,
311 .pme_pread8 = ksz8_pme_pread8,
312 .pme_pwrite8 = ksz8_pme_pwrite8,
313 };
314
315 static const struct ksz_dev_ops ksz87xx_dev_ops = {
316 .setup = ksz8_setup,
317 .get_port_addr = ksz8_get_port_addr,
318 .cfg_port_member = ksz8_cfg_port_member,
319 .flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
320 .port_setup = ksz8_port_setup,
321 .r_phy = ksz8_r_phy,
322 .w_phy = ksz8_w_phy,
323 .r_mib_cnt = ksz8_r_mib_cnt,
324 .r_mib_pkt = ksz8_r_mib_pkt,
325 .r_mib_stat64 = ksz_r_mib_stats64,
326 .freeze_mib = ksz8_freeze_mib,
327 .port_init_cnt = ksz8_port_init_cnt,
328 .fdb_dump = ksz8_fdb_dump,
329 .fdb_add = ksz8_fdb_add,
330 .fdb_del = ksz8_fdb_del,
331 .mdb_add = ksz8_mdb_add,
332 .mdb_del = ksz8_mdb_del,
333 .vlan_filtering = ksz8_port_vlan_filtering,
334 .vlan_add = ksz8_port_vlan_add,
335 .vlan_del = ksz8_port_vlan_del,
336 .mirror_add = ksz8_port_mirror_add,
337 .mirror_del = ksz8_port_mirror_del,
338 .get_caps = ksz8_get_caps,
339 .config_cpu_port = ksz8_config_cpu_port,
340 .enable_stp_addr = ksz8_enable_stp_addr,
341 .reset = ksz8_reset_switch,
342 .init = ksz8_switch_init,
343 .exit = ksz8_switch_exit,
344 .change_mtu = ksz8_change_mtu,
345 .pme_write8 = ksz8_pme_write8,
346 .pme_pread8 = ksz8_pme_pread8,
347 .pme_pwrite8 = ksz8_pme_pwrite8,
348 };
349
350 static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
351 struct phy_device *phydev,
352 unsigned int mode,
353 phy_interface_t interface,
354 int speed, int duplex, bool tx_pause,
355 bool rx_pause);
356
357 static const struct phylink_mac_ops ksz9477_phylink_mac_ops = {
358 .mac_config = ksz_phylink_mac_config,
359 .mac_link_down = ksz_phylink_mac_link_down,
360 .mac_link_up = ksz9477_phylink_mac_link_up,
361 };
362
363 static const struct ksz_dev_ops ksz9477_dev_ops = {
364 .setup = ksz9477_setup,
365 .get_port_addr = ksz9477_get_port_addr,
366 .cfg_port_member = ksz9477_cfg_port_member,
367 .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
368 .port_setup = ksz9477_port_setup,
369 .set_ageing_time = ksz9477_set_ageing_time,
370 .r_phy = ksz9477_r_phy,
371 .w_phy = ksz9477_w_phy,
372 .r_mib_cnt = ksz9477_r_mib_cnt,
373 .r_mib_pkt = ksz9477_r_mib_pkt,
374 .r_mib_stat64 = ksz_r_mib_stats64,
375 .freeze_mib = ksz9477_freeze_mib,
376 .port_init_cnt = ksz9477_port_init_cnt,
377 .vlan_filtering = ksz9477_port_vlan_filtering,
378 .vlan_add = ksz9477_port_vlan_add,
379 .vlan_del = ksz9477_port_vlan_del,
380 .mirror_add = ksz9477_port_mirror_add,
381 .mirror_del = ksz9477_port_mirror_del,
382 .get_caps = ksz9477_get_caps,
383 .fdb_dump = ksz9477_fdb_dump,
384 .fdb_add = ksz9477_fdb_add,
385 .fdb_del = ksz9477_fdb_del,
386 .mdb_add = ksz9477_mdb_add,
387 .mdb_del = ksz9477_mdb_del,
388 .change_mtu = ksz9477_change_mtu,
389 .pme_write8 = ksz_write8,
390 .pme_pread8 = ksz_pread8,
391 .pme_pwrite8 = ksz_pwrite8,
392 .config_cpu_port = ksz9477_config_cpu_port,
393 .tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc,
394 .enable_stp_addr = ksz9477_enable_stp_addr,
395 .reset = ksz9477_reset_switch,
396 .init = ksz9477_switch_init,
397 .exit = ksz9477_switch_exit,
398 };
399
400 static const struct phylink_mac_ops lan937x_phylink_mac_ops = {
401 .mac_config = ksz_phylink_mac_config,
402 .mac_link_down = ksz_phylink_mac_link_down,
403 .mac_link_up = ksz9477_phylink_mac_link_up,
404 };
405
406 static const struct ksz_dev_ops lan937x_dev_ops = {
407 .setup = lan937x_setup,
408 .teardown = lan937x_teardown,
409 .get_port_addr = ksz9477_get_port_addr,
410 .cfg_port_member = ksz9477_cfg_port_member,
411 .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
412 .port_setup = lan937x_port_setup,
413 .set_ageing_time = lan937x_set_ageing_time,
414 .r_phy = lan937x_r_phy,
415 .w_phy = lan937x_w_phy,
416 .r_mib_cnt = ksz9477_r_mib_cnt,
417 .r_mib_pkt = ksz9477_r_mib_pkt,
418 .r_mib_stat64 = ksz_r_mib_stats64,
419 .freeze_mib = ksz9477_freeze_mib,
420 .port_init_cnt = ksz9477_port_init_cnt,
421 .vlan_filtering = ksz9477_port_vlan_filtering,
422 .vlan_add = ksz9477_port_vlan_add,
423 .vlan_del = ksz9477_port_vlan_del,
424 .mirror_add = ksz9477_port_mirror_add,
425 .mirror_del = ksz9477_port_mirror_del,
426 .get_caps = lan937x_phylink_get_caps,
427 .setup_rgmii_delay = lan937x_setup_rgmii_delay,
428 .fdb_dump = ksz9477_fdb_dump,
429 .fdb_add = ksz9477_fdb_add,
430 .fdb_del = ksz9477_fdb_del,
431 .mdb_add = ksz9477_mdb_add,
432 .mdb_del = ksz9477_mdb_del,
433 .change_mtu = lan937x_change_mtu,
434 .config_cpu_port = lan937x_config_cpu_port,
435 .tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
436 .enable_stp_addr = ksz9477_enable_stp_addr,
437 .reset = lan937x_reset_switch,
438 .init = lan937x_switch_init,
439 .exit = lan937x_switch_exit,
440 };
441
442 static const u16 ksz8795_regs[] = {
443 [REG_SW_MAC_ADDR] = 0x68,
444 [REG_IND_CTRL_0] = 0x6E,
445 [REG_IND_DATA_8] = 0x70,
446 [REG_IND_DATA_CHECK] = 0x72,
447 [REG_IND_DATA_HI] = 0x71,
448 [REG_IND_DATA_LO] = 0x75,
449 [REG_IND_MIB_CHECK] = 0x74,
450 [REG_IND_BYTE] = 0xA0,
451 [P_FORCE_CTRL] = 0x0C,
452 [P_LINK_STATUS] = 0x0E,
453 [P_LOCAL_CTRL] = 0x07,
454 [P_NEG_RESTART_CTRL] = 0x0D,
455 [P_REMOTE_STATUS] = 0x08,
456 [P_SPEED_STATUS] = 0x09,
457 [S_TAIL_TAG_CTRL] = 0x0C,
458 [P_STP_CTRL] = 0x02,
459 [S_START_CTRL] = 0x01,
460 [S_BROADCAST_CTRL] = 0x06,
461 [S_MULTICAST_CTRL] = 0x04,
462 [P_XMII_CTRL_0] = 0x06,
463 [P_XMII_CTRL_1] = 0x06,
464 [REG_SW_PME_CTRL] = 0x8003,
465 [REG_PORT_PME_STATUS] = 0x8003,
466 [REG_PORT_PME_CTRL] = 0x8007,
467 };
468
469 static const u32 ksz8795_masks[] = {
470 [PORT_802_1P_REMAPPING] = BIT(7),
471 [SW_TAIL_TAG_ENABLE] = BIT(1),
472 [MIB_COUNTER_OVERFLOW] = BIT(6),
473 [MIB_COUNTER_VALID] = BIT(5),
474 [VLAN_TABLE_FID] = GENMASK(6, 0),
475 [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7),
476 [VLAN_TABLE_VALID] = BIT(12),
477 [STATIC_MAC_TABLE_VALID] = BIT(21),
478 [STATIC_MAC_TABLE_USE_FID] = BIT(23),
479 [STATIC_MAC_TABLE_FID] = GENMASK(30, 24),
480 [STATIC_MAC_TABLE_OVERRIDE] = BIT(22),
481 [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16),
482 [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0),
483 [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7),
484 [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7),
485 [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29),
486 [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16),
487 [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24),
488 [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27),
489 [P_MII_TX_FLOW_CTRL] = BIT(5),
490 [P_MII_RX_FLOW_CTRL] = BIT(5),
491 };
492
493 static const u8 ksz8795_xmii_ctrl0[] = {
494 [P_MII_100MBIT] = 0,
495 [P_MII_10MBIT] = 1,
496 [P_MII_FULL_DUPLEX] = 0,
497 [P_MII_HALF_DUPLEX] = 1,
498 };
499
500 static const u8 ksz8795_xmii_ctrl1[] = {
501 [P_RGMII_SEL] = 3,
502 [P_GMII_SEL] = 2,
503 [P_RMII_SEL] = 1,
504 [P_MII_SEL] = 0,
505 [P_GMII_1GBIT] = 1,
506 [P_GMII_NOT_1GBIT] = 0,
507 };
508
509 static const u8 ksz8795_shifts[] = {
510 [VLAN_TABLE_MEMBERSHIP_S] = 7,
511 [VLAN_TABLE] = 16,
512 [STATIC_MAC_FWD_PORTS] = 16,
513 [STATIC_MAC_FID] = 24,
514 [DYNAMIC_MAC_ENTRIES_H] = 3,
515 [DYNAMIC_MAC_ENTRIES] = 29,
516 [DYNAMIC_MAC_FID] = 16,
517 [DYNAMIC_MAC_TIMESTAMP] = 27,
518 [DYNAMIC_MAC_SRC_PORT] = 24,
519 };
520
521 static const u16 ksz8863_regs[] = {
522 [REG_SW_MAC_ADDR] = 0x70,
523 [REG_IND_CTRL_0] = 0x79,
524 [REG_IND_DATA_8] = 0x7B,
525 [REG_IND_DATA_CHECK] = 0x7B,
526 [REG_IND_DATA_HI] = 0x7C,
527 [REG_IND_DATA_LO] = 0x80,
528 [REG_IND_MIB_CHECK] = 0x80,
529 [P_FORCE_CTRL] = 0x0C,
530 [P_LINK_STATUS] = 0x0E,
531 [P_LOCAL_CTRL] = 0x0C,
532 [P_NEG_RESTART_CTRL] = 0x0D,
533 [P_REMOTE_STATUS] = 0x0E,
534 [P_SPEED_STATUS] = 0x0F,
535 [S_TAIL_TAG_CTRL] = 0x03,
536 [P_STP_CTRL] = 0x02,
537 [S_START_CTRL] = 0x01,
538 [S_BROADCAST_CTRL] = 0x06,
539 [S_MULTICAST_CTRL] = 0x04,
540 };
541
542 static const u32 ksz8863_masks[] = {
543 [PORT_802_1P_REMAPPING] = BIT(3),
544 [SW_TAIL_TAG_ENABLE] = BIT(6),
545 [MIB_COUNTER_OVERFLOW] = BIT(7),
546 [MIB_COUNTER_VALID] = BIT(6),
547 [VLAN_TABLE_FID] = GENMASK(15, 12),
548 [VLAN_TABLE_MEMBERSHIP] = GENMASK(18, 16),
549 [VLAN_TABLE_VALID] = BIT(19),
550 [STATIC_MAC_TABLE_VALID] = BIT(19),
551 [STATIC_MAC_TABLE_USE_FID] = BIT(21),
552 [STATIC_MAC_TABLE_FID] = GENMASK(25, 22),
553 [STATIC_MAC_TABLE_OVERRIDE] = BIT(20),
554 [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(18, 16),
555 [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(1, 0),
556 [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(2),
557 [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7),
558 [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 24),
559 [DYNAMIC_MAC_TABLE_FID] = GENMASK(19, 16),
560 [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(21, 20),
561 [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(23, 22),
562 };
563
564 static u8 ksz8863_shifts[] = {
565 [VLAN_TABLE_MEMBERSHIP_S] = 16,
566 [STATIC_MAC_FWD_PORTS] = 16,
567 [STATIC_MAC_FID] = 22,
568 [DYNAMIC_MAC_ENTRIES_H] = 8,
569 [DYNAMIC_MAC_ENTRIES] = 24,
570 [DYNAMIC_MAC_FID] = 16,
571 [DYNAMIC_MAC_TIMESTAMP] = 22,
572 [DYNAMIC_MAC_SRC_PORT] = 20,
573 };
574
575 static const u16 ksz8895_regs[] = {
576 [REG_SW_MAC_ADDR] = 0x68,
577 [REG_IND_CTRL_0] = 0x6E,
578 [REG_IND_DATA_8] = 0x70,
579 [REG_IND_DATA_CHECK] = 0x72,
580 [REG_IND_DATA_HI] = 0x71,
581 [REG_IND_DATA_LO] = 0x75,
582 [REG_IND_MIB_CHECK] = 0x75,
583 [P_FORCE_CTRL] = 0x0C,
584 [P_LINK_STATUS] = 0x0E,
585 [P_LOCAL_CTRL] = 0x0C,
586 [P_NEG_RESTART_CTRL] = 0x0D,
587 [P_REMOTE_STATUS] = 0x0E,
588 [P_SPEED_STATUS] = 0x09,
589 [S_TAIL_TAG_CTRL] = 0x0C,
590 [P_STP_CTRL] = 0x02,
591 [S_START_CTRL] = 0x01,
592 [S_BROADCAST_CTRL] = 0x06,
593 [S_MULTICAST_CTRL] = 0x04,
594 };
595
596 static const u32 ksz8895_masks[] = {
597 [PORT_802_1P_REMAPPING] = BIT(7),
598 [SW_TAIL_TAG_ENABLE] = BIT(1),
599 [MIB_COUNTER_OVERFLOW] = BIT(7),
600 [MIB_COUNTER_VALID] = BIT(6),
601 [VLAN_TABLE_FID] = GENMASK(6, 0),
602 [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7),
603 [VLAN_TABLE_VALID] = BIT(12),
604 [STATIC_MAC_TABLE_VALID] = BIT(21),
605 [STATIC_MAC_TABLE_USE_FID] = BIT(23),
606 [STATIC_MAC_TABLE_FID] = GENMASK(30, 24),
607 [STATIC_MAC_TABLE_OVERRIDE] = BIT(22),
608 [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16),
609 [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0),
610 [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7),
611 [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7),
612 [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29),
613 [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16),
614 [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24),
615 [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27),
616 };
617
618 static const u8 ksz8895_shifts[] = {
619 [VLAN_TABLE_MEMBERSHIP_S] = 7,
620 [VLAN_TABLE] = 13,
621 [STATIC_MAC_FWD_PORTS] = 16,
622 [STATIC_MAC_FID] = 24,
623 [DYNAMIC_MAC_ENTRIES_H] = 3,
624 [DYNAMIC_MAC_ENTRIES] = 29,
625 [DYNAMIC_MAC_FID] = 16,
626 [DYNAMIC_MAC_TIMESTAMP] = 27,
627 [DYNAMIC_MAC_SRC_PORT] = 24,
628 };
629
630 static const u16 ksz9477_regs[] = {
631 [REG_SW_MAC_ADDR] = 0x0302,
632 [P_STP_CTRL] = 0x0B04,
633 [S_START_CTRL] = 0x0300,
634 [S_BROADCAST_CTRL] = 0x0332,
635 [S_MULTICAST_CTRL] = 0x0331,
636 [P_XMII_CTRL_0] = 0x0300,
637 [P_XMII_CTRL_1] = 0x0301,
638 [REG_SW_PME_CTRL] = 0x0006,
639 [REG_PORT_PME_STATUS] = 0x0013,
640 [REG_PORT_PME_CTRL] = 0x0017,
641 };
642
643 static const u32 ksz9477_masks[] = {
644 [ALU_STAT_WRITE] = 0,
645 [ALU_STAT_READ] = 1,
646 [P_MII_TX_FLOW_CTRL] = BIT(5),
647 [P_MII_RX_FLOW_CTRL] = BIT(3),
648 };
649
650 static const u8 ksz9477_shifts[] = {
651 [ALU_STAT_INDEX] = 16,
652 };
653
654 static const u8 ksz9477_xmii_ctrl0[] = {
655 [P_MII_100MBIT] = 1,
656 [P_MII_10MBIT] = 0,
657 [P_MII_FULL_DUPLEX] = 1,
658 [P_MII_HALF_DUPLEX] = 0,
659 };
660
661 static const u8 ksz9477_xmii_ctrl1[] = {
662 [P_RGMII_SEL] = 0,
663 [P_RMII_SEL] = 1,
664 [P_GMII_SEL] = 2,
665 [P_MII_SEL] = 3,
666 [P_GMII_1GBIT] = 0,
667 [P_GMII_NOT_1GBIT] = 1,
668 };
669
670 static const u32 lan937x_masks[] = {
671 [ALU_STAT_WRITE] = 1,
672 [ALU_STAT_READ] = 2,
673 [P_MII_TX_FLOW_CTRL] = BIT(5),
674 [P_MII_RX_FLOW_CTRL] = BIT(3),
675 };
676
677 static const u8 lan937x_shifts[] = {
678 [ALU_STAT_INDEX] = 8,
679 };
680
681 static const struct regmap_range ksz8563_valid_regs[] = {
682 regmap_reg_range(0x0000, 0x0003),
683 regmap_reg_range(0x0006, 0x0006),
684 regmap_reg_range(0x000f, 0x001f),
685 regmap_reg_range(0x0100, 0x0100),
686 regmap_reg_range(0x0104, 0x0107),
687 regmap_reg_range(0x010d, 0x010d),
688 regmap_reg_range(0x0110, 0x0113),
689 regmap_reg_range(0x0120, 0x012b),
690 regmap_reg_range(0x0201, 0x0201),
691 regmap_reg_range(0x0210, 0x0213),
692 regmap_reg_range(0x0300, 0x0300),
693 regmap_reg_range(0x0302, 0x031b),
694 regmap_reg_range(0x0320, 0x032b),
695 regmap_reg_range(0x0330, 0x0336),
696 regmap_reg_range(0x0338, 0x033e),
697 regmap_reg_range(0x0340, 0x035f),
698 regmap_reg_range(0x0370, 0x0370),
699 regmap_reg_range(0x0378, 0x0378),
700 regmap_reg_range(0x037c, 0x037d),
701 regmap_reg_range(0x0390, 0x0393),
702 regmap_reg_range(0x0400, 0x040e),
703 regmap_reg_range(0x0410, 0x042f),
704 regmap_reg_range(0x0500, 0x0519),
705 regmap_reg_range(0x0520, 0x054b),
706 regmap_reg_range(0x0550, 0x05b3),
707
708 /* port 1 */
709 regmap_reg_range(0x1000, 0x1001),
710 regmap_reg_range(0x1004, 0x100b),
711 regmap_reg_range(0x1013, 0x1013),
712 regmap_reg_range(0x1017, 0x1017),
713 regmap_reg_range(0x101b, 0x101b),
714 regmap_reg_range(0x101f, 0x1021),
715 regmap_reg_range(0x1030, 0x1030),
716 regmap_reg_range(0x1100, 0x1111),
717 regmap_reg_range(0x111a, 0x111d),
718 regmap_reg_range(0x1122, 0x1127),
719 regmap_reg_range(0x112a, 0x112b),
720 regmap_reg_range(0x1136, 0x1139),
721 regmap_reg_range(0x113e, 0x113f),
722 regmap_reg_range(0x1400, 0x1401),
723 regmap_reg_range(0x1403, 0x1403),
724 regmap_reg_range(0x1410, 0x1417),
725 regmap_reg_range(0x1420, 0x1423),
726 regmap_reg_range(0x1500, 0x1507),
727 regmap_reg_range(0x1600, 0x1612),
728 regmap_reg_range(0x1800, 0x180f),
729 regmap_reg_range(0x1900, 0x1907),
730 regmap_reg_range(0x1914, 0x191b),
731 regmap_reg_range(0x1a00, 0x1a03),
732 regmap_reg_range(0x1a04, 0x1a08),
733 regmap_reg_range(0x1b00, 0x1b01),
734 regmap_reg_range(0x1b04, 0x1b04),
735 regmap_reg_range(0x1c00, 0x1c05),
736 regmap_reg_range(0x1c08, 0x1c1b),
737
738 /* port 2 */
739 regmap_reg_range(0x2000, 0x2001),
740 regmap_reg_range(0x2004, 0x200b),
741 regmap_reg_range(0x2013, 0x2013),
742 regmap_reg_range(0x2017, 0x2017),
743 regmap_reg_range(0x201b, 0x201b),
744 regmap_reg_range(0x201f, 0x2021),
745 regmap_reg_range(0x2030, 0x2030),
746 regmap_reg_range(0x2100, 0x2111),
747 regmap_reg_range(0x211a, 0x211d),
748 regmap_reg_range(0x2122, 0x2127),
749 regmap_reg_range(0x212a, 0x212b),
750 regmap_reg_range(0x2136, 0x2139),
751 regmap_reg_range(0x213e, 0x213f),
752 regmap_reg_range(0x2400, 0x2401),
753 regmap_reg_range(0x2403, 0x2403),
754 regmap_reg_range(0x2410, 0x2417),
755 regmap_reg_range(0x2420, 0x2423),
756 regmap_reg_range(0x2500, 0x2507),
757 regmap_reg_range(0x2600, 0x2612),
758 regmap_reg_range(0x2800, 0x280f),
759 regmap_reg_range(0x2900, 0x2907),
760 regmap_reg_range(0x2914, 0x291b),
761 regmap_reg_range(0x2a00, 0x2a03),
762 regmap_reg_range(0x2a04, 0x2a08),
763 regmap_reg_range(0x2b00, 0x2b01),
764 regmap_reg_range(0x2b04, 0x2b04),
765 regmap_reg_range(0x2c00, 0x2c05),
766 regmap_reg_range(0x2c08, 0x2c1b),
767
768 /* port 3 */
769 regmap_reg_range(0x3000, 0x3001),
770 regmap_reg_range(0x3004, 0x300b),
771 regmap_reg_range(0x3013, 0x3013),
772 regmap_reg_range(0x3017, 0x3017),
773 regmap_reg_range(0x301b, 0x301b),
774 regmap_reg_range(0x301f, 0x3021),
775 regmap_reg_range(0x3030, 0x3030),
776 regmap_reg_range(0x3300, 0x3301),
777 regmap_reg_range(0x3303, 0x3303),
778 regmap_reg_range(0x3400, 0x3401),
779 regmap_reg_range(0x3403, 0x3403),
780 regmap_reg_range(0x3410, 0x3417),
781 regmap_reg_range(0x3420, 0x3423),
782 regmap_reg_range(0x3500, 0x3507),
783 regmap_reg_range(0x3600, 0x3612),
784 regmap_reg_range(0x3800, 0x380f),
785 regmap_reg_range(0x3900, 0x3907),
786 regmap_reg_range(0x3914, 0x391b),
787 regmap_reg_range(0x3a00, 0x3a03),
788 regmap_reg_range(0x3a04, 0x3a08),
789 regmap_reg_range(0x3b00, 0x3b01),
790 regmap_reg_range(0x3b04, 0x3b04),
791 regmap_reg_range(0x3c00, 0x3c05),
792 regmap_reg_range(0x3c08, 0x3c1b),
793 };
794
795 static const struct regmap_access_table ksz8563_register_set = {
796 .yes_ranges = ksz8563_valid_regs,
797 .n_yes_ranges = ARRAY_SIZE(ksz8563_valid_regs),
798 };
799
800 static const struct regmap_range ksz9477_valid_regs[] = {
801 regmap_reg_range(0x0000, 0x0003),
802 regmap_reg_range(0x0006, 0x0006),
803 regmap_reg_range(0x0010, 0x001f),
804 regmap_reg_range(0x0100, 0x0100),
805 regmap_reg_range(0x0103, 0x0107),
806 regmap_reg_range(0x010d, 0x010d),
807 regmap_reg_range(0x0110, 0x0113),
808 regmap_reg_range(0x0120, 0x012b),
809 regmap_reg_range(0x0201, 0x0201),
810 regmap_reg_range(0x0210, 0x0213),
811 regmap_reg_range(0x0300, 0x0300),
812 regmap_reg_range(0x0302, 0x031b),
813 regmap_reg_range(0x0320, 0x032b),
814 regmap_reg_range(0x0330, 0x0336),
815 regmap_reg_range(0x0338, 0x033b),
816 regmap_reg_range(0x033e, 0x033e),
817 regmap_reg_range(0x0340, 0x035f),
818 regmap_reg_range(0x0370, 0x0370),
819 regmap_reg_range(0x0378, 0x0378),
820 regmap_reg_range(0x037c, 0x037d),
821 regmap_reg_range(0x0390, 0x0393),
822 regmap_reg_range(0x0400, 0x040e),
823 regmap_reg_range(0x0410, 0x042f),
824 regmap_reg_range(0x0444, 0x044b),
825 regmap_reg_range(0x0450, 0x046f),
826 regmap_reg_range(0x0500, 0x0519),
827 regmap_reg_range(0x0520, 0x054b),
828 regmap_reg_range(0x0550, 0x05b3),
829 regmap_reg_range(0x0604, 0x060b),
830 regmap_reg_range(0x0610, 0x0612),
831 regmap_reg_range(0x0614, 0x062c),
832 regmap_reg_range(0x0640, 0x0645),
833 regmap_reg_range(0x0648, 0x064d),
834
835 /* port 1 */
836 regmap_reg_range(0x1000, 0x1001),
837 regmap_reg_range(0x1013, 0x1013),
838 regmap_reg_range(0x1017, 0x1017),
839 regmap_reg_range(0x101b, 0x101b),
840 regmap_reg_range(0x101f, 0x1020),
841 regmap_reg_range(0x1030, 0x1030),
842 regmap_reg_range(0x1100, 0x1115),
843 regmap_reg_range(0x111a, 0x111f),
844 regmap_reg_range(0x1120, 0x112b),
845 regmap_reg_range(0x1134, 0x113b),
846 regmap_reg_range(0x113c, 0x113f),
847 regmap_reg_range(0x1400, 0x1401),
848 regmap_reg_range(0x1403, 0x1403),
849 regmap_reg_range(0x1410, 0x1417),
850 regmap_reg_range(0x1420, 0x1423),
851 regmap_reg_range(0x1500, 0x1507),
852 regmap_reg_range(0x1600, 0x1613),
853 regmap_reg_range(0x1800, 0x180f),
854 regmap_reg_range(0x1820, 0x1827),
855 regmap_reg_range(0x1830, 0x1837),
856 regmap_reg_range(0x1840, 0x184b),
857 regmap_reg_range(0x1900, 0x1907),
858 regmap_reg_range(0x1914, 0x191b),
859 regmap_reg_range(0x1920, 0x1920),
860 regmap_reg_range(0x1923, 0x1927),
861 regmap_reg_range(0x1a00, 0x1a03),
862 regmap_reg_range(0x1a04, 0x1a07),
863 regmap_reg_range(0x1b00, 0x1b01),
864 regmap_reg_range(0x1b04, 0x1b04),
865 regmap_reg_range(0x1c00, 0x1c05),
866 regmap_reg_range(0x1c08, 0x1c1b),
867
868 /* port 2 */
869 regmap_reg_range(0x2000, 0x2001),
870 regmap_reg_range(0x2013, 0x2013),
871 regmap_reg_range(0x2017, 0x2017),
872 regmap_reg_range(0x201b, 0x201b),
873 regmap_reg_range(0x201f, 0x2020),
874 regmap_reg_range(0x2030, 0x2030),
875 regmap_reg_range(0x2100, 0x2115),
876 regmap_reg_range(0x211a, 0x211f),
877 regmap_reg_range(0x2120, 0x212b),
878 regmap_reg_range(0x2134, 0x213b),
879 regmap_reg_range(0x213c, 0x213f),
880 regmap_reg_range(0x2400, 0x2401),
881 regmap_reg_range(0x2403, 0x2403),
882 regmap_reg_range(0x2410, 0x2417),
883 regmap_reg_range(0x2420, 0x2423),
884 regmap_reg_range(0x2500, 0x2507),
885 regmap_reg_range(0x2600, 0x2613),
886 regmap_reg_range(0x2800, 0x280f),
887 regmap_reg_range(0x2820, 0x2827),
888 regmap_reg_range(0x2830, 0x2837),
889 regmap_reg_range(0x2840, 0x284b),
890 regmap_reg_range(0x2900, 0x2907),
891 regmap_reg_range(0x2914, 0x291b),
892 regmap_reg_range(0x2920, 0x2920),
893 regmap_reg_range(0x2923, 0x2927),
894 regmap_reg_range(0x2a00, 0x2a03),
895 regmap_reg_range(0x2a04, 0x2a07),
896 regmap_reg_range(0x2b00, 0x2b01),
897 regmap_reg_range(0x2b04, 0x2b04),
898 regmap_reg_range(0x2c00, 0x2c05),
899 regmap_reg_range(0x2c08, 0x2c1b),
900
901 /* port 3 */
902 regmap_reg_range(0x3000, 0x3001),
903 regmap_reg_range(0x3013, 0x3013),
904 regmap_reg_range(0x3017, 0x3017),
905 regmap_reg_range(0x301b, 0x301b),
906 regmap_reg_range(0x301f, 0x3020),
907 regmap_reg_range(0x3030, 0x3030),
908 regmap_reg_range(0x3100, 0x3115),
909 regmap_reg_range(0x311a, 0x311f),
910 regmap_reg_range(0x3120, 0x312b),
911 regmap_reg_range(0x3134, 0x313b),
912 regmap_reg_range(0x313c, 0x313f),
913 regmap_reg_range(0x3400, 0x3401),
914 regmap_reg_range(0x3403, 0x3403),
915 regmap_reg_range(0x3410, 0x3417),
916 regmap_reg_range(0x3420, 0x3423),
917 regmap_reg_range(0x3500, 0x3507),
918 regmap_reg_range(0x3600, 0x3613),
919 regmap_reg_range(0x3800, 0x380f),
920 regmap_reg_range(0x3820, 0x3827),
921 regmap_reg_range(0x3830, 0x3837),
922 regmap_reg_range(0x3840, 0x384b),
923 regmap_reg_range(0x3900, 0x3907),
924 regmap_reg_range(0x3914, 0x391b),
925 regmap_reg_range(0x3920, 0x3920),
926 regmap_reg_range(0x3923, 0x3927),
927 regmap_reg_range(0x3a00, 0x3a03),
928 regmap_reg_range(0x3a04, 0x3a07),
929 regmap_reg_range(0x3b00, 0x3b01),
930 regmap_reg_range(0x3b04, 0x3b04),
931 regmap_reg_range(0x3c00, 0x3c05),
932 regmap_reg_range(0x3c08, 0x3c1b),
933
934 /* port 4 */
935 regmap_reg_range(0x4000, 0x4001),
936 regmap_reg_range(0x4013, 0x4013),
937 regmap_reg_range(0x4017, 0x4017),
938 regmap_reg_range(0x401b, 0x401b),
939 regmap_reg_range(0x401f, 0x4020),
940 regmap_reg_range(0x4030, 0x4030),
941 regmap_reg_range(0x4100, 0x4115),
942 regmap_reg_range(0x411a, 0x411f),
943 regmap_reg_range(0x4120, 0x412b),
944 regmap_reg_range(0x4134, 0x413b),
945 regmap_reg_range(0x413c, 0x413f),
946 regmap_reg_range(0x4400, 0x4401),
947 regmap_reg_range(0x4403, 0x4403),
948 regmap_reg_range(0x4410, 0x4417),
949 regmap_reg_range(0x4420, 0x4423),
950 regmap_reg_range(0x4500, 0x4507),
951 regmap_reg_range(0x4600, 0x4613),
952 regmap_reg_range(0x4800, 0x480f),
953 regmap_reg_range(0x4820, 0x4827),
954 regmap_reg_range(0x4830, 0x4837),
955 regmap_reg_range(0x4840, 0x484b),
956 regmap_reg_range(0x4900, 0x4907),
957 regmap_reg_range(0x4914, 0x491b),
958 regmap_reg_range(0x4920, 0x4920),
959 regmap_reg_range(0x4923, 0x4927),
960 regmap_reg_range(0x4a00, 0x4a03),
961 regmap_reg_range(0x4a04, 0x4a07),
962 regmap_reg_range(0x4b00, 0x4b01),
963 regmap_reg_range(0x4b04, 0x4b04),
964 regmap_reg_range(0x4c00, 0x4c05),
965 regmap_reg_range(0x4c08, 0x4c1b),
966
967 /* port 5 */
968 regmap_reg_range(0x5000, 0x5001),
969 regmap_reg_range(0x5013, 0x5013),
970 regmap_reg_range(0x5017, 0x5017),
971 regmap_reg_range(0x501b, 0x501b),
972 regmap_reg_range(0x501f, 0x5020),
973 regmap_reg_range(0x5030, 0x5030),
974 regmap_reg_range(0x5100, 0x5115),
975 regmap_reg_range(0x511a, 0x511f),
976 regmap_reg_range(0x5120, 0x512b),
977 regmap_reg_range(0x5134, 0x513b),
978 regmap_reg_range(0x513c, 0x513f),
979 regmap_reg_range(0x5400, 0x5401),
980 regmap_reg_range(0x5403, 0x5403),
981 regmap_reg_range(0x5410, 0x5417),
982 regmap_reg_range(0x5420, 0x5423),
983 regmap_reg_range(0x5500, 0x5507),
984 regmap_reg_range(0x5600, 0x5613),
985 regmap_reg_range(0x5800, 0x580f),
986 regmap_reg_range(0x5820, 0x5827),
987 regmap_reg_range(0x5830, 0x5837),
988 regmap_reg_range(0x5840, 0x584b),
989 regmap_reg_range(0x5900, 0x5907),
990 regmap_reg_range(0x5914, 0x591b),
991 regmap_reg_range(0x5920, 0x5920),
992 regmap_reg_range(0x5923, 0x5927),
993 regmap_reg_range(0x5a00, 0x5a03),
994 regmap_reg_range(0x5a04, 0x5a07),
995 regmap_reg_range(0x5b00, 0x5b01),
996 regmap_reg_range(0x5b04, 0x5b04),
997 regmap_reg_range(0x5c00, 0x5c05),
998 regmap_reg_range(0x5c08, 0x5c1b),
999
1000 /* port 6 */
1001 regmap_reg_range(0x6000, 0x6001),
1002 regmap_reg_range(0x6013, 0x6013),
1003 regmap_reg_range(0x6017, 0x6017),
1004 regmap_reg_range(0x601b, 0x601b),
1005 regmap_reg_range(0x601f, 0x6020),
1006 regmap_reg_range(0x6030, 0x6030),
1007 regmap_reg_range(0x6300, 0x6301),
1008 regmap_reg_range(0x6400, 0x6401),
1009 regmap_reg_range(0x6403, 0x6403),
1010 regmap_reg_range(0x6410, 0x6417),
1011 regmap_reg_range(0x6420, 0x6423),
1012 regmap_reg_range(0x6500, 0x6507),
1013 regmap_reg_range(0x6600, 0x6613),
1014 regmap_reg_range(0x6800, 0x680f),
1015 regmap_reg_range(0x6820, 0x6827),
1016 regmap_reg_range(0x6830, 0x6837),
1017 regmap_reg_range(0x6840, 0x684b),
1018 regmap_reg_range(0x6900, 0x6907),
1019 regmap_reg_range(0x6914, 0x691b),
1020 regmap_reg_range(0x6920, 0x6920),
1021 regmap_reg_range(0x6923, 0x6927),
1022 regmap_reg_range(0x6a00, 0x6a03),
1023 regmap_reg_range(0x6a04, 0x6a07),
1024 regmap_reg_range(0x6b00, 0x6b01),
1025 regmap_reg_range(0x6b04, 0x6b04),
1026 regmap_reg_range(0x6c00, 0x6c05),
1027 regmap_reg_range(0x6c08, 0x6c1b),
1028
1029 /* port 7 */
1030 regmap_reg_range(0x7000, 0x7001),
1031 regmap_reg_range(0x7013, 0x7013),
1032 regmap_reg_range(0x7017, 0x7017),
1033 regmap_reg_range(0x701b, 0x701b),
1034 regmap_reg_range(0x701f, 0x7020),
1035 regmap_reg_range(0x7030, 0x7030),
1036 regmap_reg_range(0x7200, 0x7203),
1037 regmap_reg_range(0x7206, 0x7207),
1038 regmap_reg_range(0x7300, 0x7301),
1039 regmap_reg_range(0x7400, 0x7401),
1040 regmap_reg_range(0x7403, 0x7403),
1041 regmap_reg_range(0x7410, 0x7417),
1042 regmap_reg_range(0x7420, 0x7423),
1043 regmap_reg_range(0x7500, 0x7507),
1044 regmap_reg_range(0x7600, 0x7613),
1045 regmap_reg_range(0x7800, 0x780f),
1046 regmap_reg_range(0x7820, 0x7827),
1047 regmap_reg_range(0x7830, 0x7837),
1048 regmap_reg_range(0x7840, 0x784b),
1049 regmap_reg_range(0x7900, 0x7907),
1050 regmap_reg_range(0x7914, 0x791b),
1051 regmap_reg_range(0x7920, 0x7920),
1052 regmap_reg_range(0x7923, 0x7927),
1053 regmap_reg_range(0x7a00, 0x7a03),
1054 regmap_reg_range(0x7a04, 0x7a07),
1055 regmap_reg_range(0x7b00, 0x7b01),
1056 regmap_reg_range(0x7b04, 0x7b04),
1057 regmap_reg_range(0x7c00, 0x7c05),
1058 regmap_reg_range(0x7c08, 0x7c1b),
1059 };
1060
1061 static const struct regmap_access_table ksz9477_register_set = {
1062 .yes_ranges = ksz9477_valid_regs,
1063 .n_yes_ranges = ARRAY_SIZE(ksz9477_valid_regs),
1064 };
1065
1066 static const struct regmap_range ksz9896_valid_regs[] = {
1067 regmap_reg_range(0x0000, 0x0003),
1068 regmap_reg_range(0x0006, 0x0006),
1069 regmap_reg_range(0x0010, 0x001f),
1070 regmap_reg_range(0x0100, 0x0100),
1071 regmap_reg_range(0x0103, 0x0107),
1072 regmap_reg_range(0x010d, 0x010d),
1073 regmap_reg_range(0x0110, 0x0113),
1074 regmap_reg_range(0x0120, 0x0127),
1075 regmap_reg_range(0x0201, 0x0201),
1076 regmap_reg_range(0x0210, 0x0213),
1077 regmap_reg_range(0x0300, 0x0300),
1078 regmap_reg_range(0x0302, 0x030b),
1079 regmap_reg_range(0x0310, 0x031b),
1080 regmap_reg_range(0x0320, 0x032b),
1081 regmap_reg_range(0x0330, 0x0336),
1082 regmap_reg_range(0x0338, 0x033b),
1083 regmap_reg_range(0x033e, 0x033e),
1084 regmap_reg_range(0x0340, 0x035f),
1085 regmap_reg_range(0x0370, 0x0370),
1086 regmap_reg_range(0x0378, 0x0378),
1087 regmap_reg_range(0x037c, 0x037d),
1088 regmap_reg_range(0x0390, 0x0393),
1089 regmap_reg_range(0x0400, 0x040e),
1090 regmap_reg_range(0x0410, 0x042f),
1091
1092 /* port 1 */
1093 regmap_reg_range(0x1000, 0x1001),
1094 regmap_reg_range(0x1013, 0x1013),
1095 regmap_reg_range(0x1017, 0x1017),
1096 regmap_reg_range(0x101b, 0x101b),
1097 regmap_reg_range(0x101f, 0x1020),
1098 regmap_reg_range(0x1030, 0x1030),
1099 regmap_reg_range(0x1100, 0x1115),
1100 regmap_reg_range(0x111a, 0x111f),
1101 regmap_reg_range(0x1122, 0x1127),
1102 regmap_reg_range(0x112a, 0x112b),
1103 regmap_reg_range(0x1136, 0x1139),
1104 regmap_reg_range(0x113e, 0x113f),
1105 regmap_reg_range(0x1400, 0x1401),
1106 regmap_reg_range(0x1403, 0x1403),
1107 regmap_reg_range(0x1410, 0x1417),
1108 regmap_reg_range(0x1420, 0x1423),
1109 regmap_reg_range(0x1500, 0x1507),
1110 regmap_reg_range(0x1600, 0x1612),
1111 regmap_reg_range(0x1800, 0x180f),
1112 regmap_reg_range(0x1820, 0x1827),
1113 regmap_reg_range(0x1830, 0x1837),
1114 regmap_reg_range(0x1840, 0x184b),
1115 regmap_reg_range(0x1900, 0x1907),
1116 regmap_reg_range(0x1914, 0x1915),
1117 regmap_reg_range(0x1a00, 0x1a03),
1118 regmap_reg_range(0x1a04, 0x1a07),
1119 regmap_reg_range(0x1b00, 0x1b01),
1120 regmap_reg_range(0x1b04, 0x1b04),
1121
1122 /* port 2 */
1123 regmap_reg_range(0x2000, 0x2001),
1124 regmap_reg_range(0x2013, 0x2013),
1125 regmap_reg_range(0x2017, 0x2017),
1126 regmap_reg_range(0x201b, 0x201b),
1127 regmap_reg_range(0x201f, 0x2020),
1128 regmap_reg_range(0x2030, 0x2030),
1129 regmap_reg_range(0x2100, 0x2115),
1130 regmap_reg_range(0x211a, 0x211f),
1131 regmap_reg_range(0x2122, 0x2127),
1132 regmap_reg_range(0x212a, 0x212b),
1133 regmap_reg_range(0x2136, 0x2139),
1134 regmap_reg_range(0x213e, 0x213f),
1135 regmap_reg_range(0x2400, 0x2401),
1136 regmap_reg_range(0x2403, 0x2403),
1137 regmap_reg_range(0x2410, 0x2417),
1138 regmap_reg_range(0x2420, 0x2423),
1139 regmap_reg_range(0x2500, 0x2507),
1140 regmap_reg_range(0x2600, 0x2612),
1141 regmap_reg_range(0x2800, 0x280f),
1142 regmap_reg_range(0x2820, 0x2827),
1143 regmap_reg_range(0x2830, 0x2837),
1144 regmap_reg_range(0x2840, 0x284b),
1145 regmap_reg_range(0x2900, 0x2907),
1146 regmap_reg_range(0x2914, 0x2915),
1147 regmap_reg_range(0x2a00, 0x2a03),
1148 regmap_reg_range(0x2a04, 0x2a07),
1149 regmap_reg_range(0x2b00, 0x2b01),
1150 regmap_reg_range(0x2b04, 0x2b04),
1151
1152 /* port 3 */
1153 regmap_reg_range(0x3000, 0x3001),
1154 regmap_reg_range(0x3013, 0x3013),
1155 regmap_reg_range(0x3017, 0x3017),
1156 regmap_reg_range(0x301b, 0x301b),
1157 regmap_reg_range(0x301f, 0x3020),
1158 regmap_reg_range(0x3030, 0x3030),
1159 regmap_reg_range(0x3100, 0x3115),
1160 regmap_reg_range(0x311a, 0x311f),
1161 regmap_reg_range(0x3122, 0x3127),
1162 regmap_reg_range(0x312a, 0x312b),
1163 regmap_reg_range(0x3136, 0x3139),
1164 regmap_reg_range(0x313e, 0x313f),
1165 regmap_reg_range(0x3400, 0x3401),
1166 regmap_reg_range(0x3403, 0x3403),
1167 regmap_reg_range(0x3410, 0x3417),
1168 regmap_reg_range(0x3420, 0x3423),
1169 regmap_reg_range(0x3500, 0x3507),
1170 regmap_reg_range(0x3600, 0x3612),
1171 regmap_reg_range(0x3800, 0x380f),
1172 regmap_reg_range(0x3820, 0x3827),
1173 regmap_reg_range(0x3830, 0x3837),
1174 regmap_reg_range(0x3840, 0x384b),
1175 regmap_reg_range(0x3900, 0x3907),
1176 regmap_reg_range(0x3914, 0x3915),
1177 regmap_reg_range(0x3a00, 0x3a03),
1178 regmap_reg_range(0x3a04, 0x3a07),
1179 regmap_reg_range(0x3b00, 0x3b01),
1180 regmap_reg_range(0x3b04, 0x3b04),
1181
1182 /* port 4 */
1183 regmap_reg_range(0x4000, 0x4001),
1184 regmap_reg_range(0x4013, 0x4013),
1185 regmap_reg_range(0x4017, 0x4017),
1186 regmap_reg_range(0x401b, 0x401b),
1187 regmap_reg_range(0x401f, 0x4020),
1188 regmap_reg_range(0x4030, 0x4030),
1189 regmap_reg_range(0x4100, 0x4115),
1190 regmap_reg_range(0x411a, 0x411f),
1191 regmap_reg_range(0x4122, 0x4127),
1192 regmap_reg_range(0x412a, 0x412b),
1193 regmap_reg_range(0x4136, 0x4139),
1194 regmap_reg_range(0x413e, 0x413f),
1195 regmap_reg_range(0x4400, 0x4401),
1196 regmap_reg_range(0x4403, 0x4403),
1197 regmap_reg_range(0x4410, 0x4417),
1198 regmap_reg_range(0x4420, 0x4423),
1199 regmap_reg_range(0x4500, 0x4507),
1200 regmap_reg_range(0x4600, 0x4612),
1201 regmap_reg_range(0x4800, 0x480f),
1202 regmap_reg_range(0x4820, 0x4827),
1203 regmap_reg_range(0x4830, 0x4837),
1204 regmap_reg_range(0x4840, 0x484b),
1205 regmap_reg_range(0x4900, 0x4907),
1206 regmap_reg_range(0x4914, 0x4915),
1207 regmap_reg_range(0x4a00, 0x4a03),
1208 regmap_reg_range(0x4a04, 0x4a07),
1209 regmap_reg_range(0x4b00, 0x4b01),
1210 regmap_reg_range(0x4b04, 0x4b04),
1211
1212 /* port 5 */
1213 regmap_reg_range(0x5000, 0x5001),
1214 regmap_reg_range(0x5013, 0x5013),
1215 regmap_reg_range(0x5017, 0x5017),
1216 regmap_reg_range(0x501b, 0x501b),
1217 regmap_reg_range(0x501f, 0x5020),
1218 regmap_reg_range(0x5030, 0x5030),
1219 regmap_reg_range(0x5100, 0x5115),
1220 regmap_reg_range(0x511a, 0x511f),
1221 regmap_reg_range(0x5122, 0x5127),
1222 regmap_reg_range(0x512a, 0x512b),
1223 regmap_reg_range(0x5136, 0x5139),
1224 regmap_reg_range(0x513e, 0x513f),
1225 regmap_reg_range(0x5400, 0x5401),
1226 regmap_reg_range(0x5403, 0x5403),
1227 regmap_reg_range(0x5410, 0x5417),
1228 regmap_reg_range(0x5420, 0x5423),
1229 regmap_reg_range(0x5500, 0x5507),
1230 regmap_reg_range(0x5600, 0x5612),
1231 regmap_reg_range(0x5800, 0x580f),
1232 regmap_reg_range(0x5820, 0x5827),
1233 regmap_reg_range(0x5830, 0x5837),
1234 regmap_reg_range(0x5840, 0x584b),
1235 regmap_reg_range(0x5900, 0x5907),
1236 regmap_reg_range(0x5914, 0x5915),
1237 regmap_reg_range(0x5a00, 0x5a03),
1238 regmap_reg_range(0x5a04, 0x5a07),
1239 regmap_reg_range(0x5b00, 0x5b01),
1240 regmap_reg_range(0x5b04, 0x5b04),
1241
1242 /* port 6 */
1243 regmap_reg_range(0x6000, 0x6001),
1244 regmap_reg_range(0x6013, 0x6013),
1245 regmap_reg_range(0x6017, 0x6017),
1246 regmap_reg_range(0x601b, 0x601b),
1247 regmap_reg_range(0x601f, 0x6020),
1248 regmap_reg_range(0x6030, 0x6030),
1249 regmap_reg_range(0x6100, 0x6115),
1250 regmap_reg_range(0x611a, 0x611f),
1251 regmap_reg_range(0x6122, 0x6127),
1252 regmap_reg_range(0x612a, 0x612b),
1253 regmap_reg_range(0x6136, 0x6139),
1254 regmap_reg_range(0x613e, 0x613f),
1255 regmap_reg_range(0x6300, 0x6301),
1256 regmap_reg_range(0x6400, 0x6401),
1257 regmap_reg_range(0x6403, 0x6403),
1258 regmap_reg_range(0x6410, 0x6417),
1259 regmap_reg_range(0x6420, 0x6423),
1260 regmap_reg_range(0x6500, 0x6507),
1261 regmap_reg_range(0x6600, 0x6612),
1262 regmap_reg_range(0x6800, 0x680f),
1263 regmap_reg_range(0x6820, 0x6827),
1264 regmap_reg_range(0x6830, 0x6837),
1265 regmap_reg_range(0x6840, 0x684b),
1266 regmap_reg_range(0x6900, 0x6907),
1267 regmap_reg_range(0x6914, 0x6915),
1268 regmap_reg_range(0x6a00, 0x6a03),
1269 regmap_reg_range(0x6a04, 0x6a07),
1270 regmap_reg_range(0x6b00, 0x6b01),
1271 regmap_reg_range(0x6b04, 0x6b04),
1272 };
1273
1274 static const struct regmap_access_table ksz9896_register_set = {
1275 .yes_ranges = ksz9896_valid_regs,
1276 .n_yes_ranges = ARRAY_SIZE(ksz9896_valid_regs),
1277 };
1278
1279 static const struct regmap_range ksz8873_valid_regs[] = {
1280 regmap_reg_range(0x00, 0x01),
1281 /* global control register */
1282 regmap_reg_range(0x02, 0x0f),
1283
1284 /* port registers */
1285 regmap_reg_range(0x10, 0x1d),
1286 regmap_reg_range(0x1e, 0x1f),
1287 regmap_reg_range(0x20, 0x2d),
1288 regmap_reg_range(0x2e, 0x2f),
1289 regmap_reg_range(0x30, 0x39),
1290 regmap_reg_range(0x3f, 0x3f),
1291
1292 /* advanced control registers */
1293 regmap_reg_range(0x60, 0x6f),
1294 regmap_reg_range(0x70, 0x75),
1295 regmap_reg_range(0x76, 0x78),
1296 regmap_reg_range(0x79, 0x7a),
1297 regmap_reg_range(0x7b, 0x83),
1298 regmap_reg_range(0x8e, 0x99),
1299 regmap_reg_range(0x9a, 0xa5),
1300 regmap_reg_range(0xa6, 0xa6),
1301 regmap_reg_range(0xa7, 0xaa),
1302 regmap_reg_range(0xab, 0xae),
1303 regmap_reg_range(0xaf, 0xba),
1304 regmap_reg_range(0xbb, 0xbc),
1305 regmap_reg_range(0xbd, 0xbd),
1306 regmap_reg_range(0xc0, 0xc0),
1307 regmap_reg_range(0xc2, 0xc2),
1308 regmap_reg_range(0xc3, 0xc3),
1309 regmap_reg_range(0xc4, 0xc4),
1310 regmap_reg_range(0xc6, 0xc6),
1311 };
1312
1313 static const struct regmap_access_table ksz8873_register_set = {
1314 .yes_ranges = ksz8873_valid_regs,
1315 .n_yes_ranges = ARRAY_SIZE(ksz8873_valid_regs),
1316 };
1317
1318 const struct ksz_chip_data ksz_switch_chips[] = {
1319 [KSZ8563] = {
1320 .chip_id = KSZ8563_CHIP_ID,
1321 .dev_name = "KSZ8563",
1322 .num_vlans = 4096,
1323 .num_alus = 4096,
1324 .num_statics = 16,
1325 .cpu_ports = 0x07, /* can be configured as cpu port */
1326 .port_cnt = 3, /* total port count */
1327 .port_nirqs = 3,
1328 .num_tx_queues = 4,
1329 .num_ipms = 8,
1330 .tc_cbs_supported = true,
1331 .ops = &ksz9477_dev_ops,
1332 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1333 .mib_names = ksz9477_mib_names,
1334 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1335 .reg_mib_cnt = MIB_COUNTER_NUM,
1336 .regs = ksz9477_regs,
1337 .masks = ksz9477_masks,
1338 .shifts = ksz9477_shifts,
1339 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1340 .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
1341 .supports_mii = {false, false, true},
1342 .supports_rmii = {false, false, true},
1343 .supports_rgmii = {false, false, true},
1344 .internal_phy = {true, true, false},
1345 .gbit_capable = {false, false, true},
1346 .wr_table = &ksz8563_register_set,
1347 .rd_table = &ksz8563_register_set,
1348 },
1349
1350 [KSZ8795] = {
1351 .chip_id = KSZ8795_CHIP_ID,
1352 .dev_name = "KSZ8795",
1353 .num_vlans = 4096,
1354 .num_alus = 0,
1355 .num_statics = 32,
1356 .cpu_ports = 0x10, /* can be configured as cpu port */
1357 .port_cnt = 5, /* total cpu and user ports */
1358 .num_tx_queues = 4,
1359 .num_ipms = 4,
1360 .ops = &ksz87xx_dev_ops,
1361 .phylink_mac_ops = &ksz8_phylink_mac_ops,
1362 .ksz87xx_eee_link_erratum = true,
1363 .mib_names = ksz9477_mib_names,
1364 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1365 .reg_mib_cnt = MIB_COUNTER_NUM,
1366 .regs = ksz8795_regs,
1367 .masks = ksz8795_masks,
1368 .shifts = ksz8795_shifts,
1369 .xmii_ctrl0 = ksz8795_xmii_ctrl0,
1370 .xmii_ctrl1 = ksz8795_xmii_ctrl1,
1371 .supports_mii = {false, false, false, false, true},
1372 .supports_rmii = {false, false, false, false, true},
1373 .supports_rgmii = {false, false, false, false, true},
1374 .internal_phy = {true, true, true, true, false},
1375 },
1376
1377 [KSZ8794] = {
1378 /* WARNING
1379 * =======
1380 * KSZ8794 is similar to KSZ8795, except the port map
1381 * contains a gap between external and CPU ports, the
1382 * port map is NOT continuous. The per-port register
1383 * map is shifted accordingly too, i.e. registers at
1384 * offset 0x40 are NOT used on KSZ8794 and they ARE
1385 * used on KSZ8795 for external port 3.
1386 * external cpu
1387 * KSZ8794 0,1,2 4
1388 * KSZ8795 0,1,2,3 4
1389 * KSZ8765 0,1,2,3 4
1390 * port_cnt is configured as 5, even though it is 4
1391 */
1392 .chip_id = KSZ8794_CHIP_ID,
1393 .dev_name = "KSZ8794",
1394 .num_vlans = 4096,
1395 .num_alus = 0,
1396 .num_statics = 32,
1397 .cpu_ports = 0x10, /* can be configured as cpu port */
1398 .port_cnt = 5, /* total cpu and user ports */
1399 .num_tx_queues = 4,
1400 .num_ipms = 4,
1401 .ops = &ksz87xx_dev_ops,
1402 .phylink_mac_ops = &ksz8_phylink_mac_ops,
1403 .ksz87xx_eee_link_erratum = true,
1404 .mib_names = ksz9477_mib_names,
1405 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1406 .reg_mib_cnt = MIB_COUNTER_NUM,
1407 .regs = ksz8795_regs,
1408 .masks = ksz8795_masks,
1409 .shifts = ksz8795_shifts,
1410 .xmii_ctrl0 = ksz8795_xmii_ctrl0,
1411 .xmii_ctrl1 = ksz8795_xmii_ctrl1,
1412 .supports_mii = {false, false, false, false, true},
1413 .supports_rmii = {false, false, false, false, true},
1414 .supports_rgmii = {false, false, false, false, true},
1415 .internal_phy = {true, true, true, false, false},
1416 },
1417
1418 [KSZ8765] = {
1419 .chip_id = KSZ8765_CHIP_ID,
1420 .dev_name = "KSZ8765",
1421 .num_vlans = 4096,
1422 .num_alus = 0,
1423 .num_statics = 32,
1424 .cpu_ports = 0x10, /* can be configured as cpu port */
1425 .port_cnt = 5, /* total cpu and user ports */
1426 .num_tx_queues = 4,
1427 .num_ipms = 4,
1428 .ops = &ksz87xx_dev_ops,
1429 .phylink_mac_ops = &ksz8_phylink_mac_ops,
1430 .ksz87xx_eee_link_erratum = true,
1431 .mib_names = ksz9477_mib_names,
1432 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1433 .reg_mib_cnt = MIB_COUNTER_NUM,
1434 .regs = ksz8795_regs,
1435 .masks = ksz8795_masks,
1436 .shifts = ksz8795_shifts,
1437 .xmii_ctrl0 = ksz8795_xmii_ctrl0,
1438 .xmii_ctrl1 = ksz8795_xmii_ctrl1,
1439 .supports_mii = {false, false, false, false, true},
1440 .supports_rmii = {false, false, false, false, true},
1441 .supports_rgmii = {false, false, false, false, true},
1442 .internal_phy = {true, true, true, true, false},
1443 },
1444
1445 [KSZ88X3] = {
1446 .chip_id = KSZ88X3_CHIP_ID,
1447 .dev_name = "KSZ8863/KSZ8873",
1448 .num_vlans = 16,
1449 .num_alus = 0,
1450 .num_statics = 8,
1451 .cpu_ports = 0x4, /* can be configured as cpu port */
1452 .port_cnt = 3,
1453 .num_tx_queues = 4,
1454 .num_ipms = 4,
1455 .ops = &ksz88xx_dev_ops,
1456 .phylink_mac_ops = &ksz88x3_phylink_mac_ops,
1457 .mib_names = ksz88xx_mib_names,
1458 .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
1459 .reg_mib_cnt = MIB_COUNTER_NUM,
1460 .regs = ksz8863_regs,
1461 .masks = ksz8863_masks,
1462 .shifts = ksz8863_shifts,
1463 .supports_mii = {false, false, true},
1464 .supports_rmii = {false, false, true},
1465 .internal_phy = {true, true, false},
1466 .wr_table = &ksz8873_register_set,
1467 .rd_table = &ksz8873_register_set,
1468 },
1469
1470 [KSZ8864] = {
1471 /* WARNING
1472 * =======
1473 * KSZ8864 is similar to KSZ8895, except the first port
1474 * does not exist.
1475 * external cpu
1476 * KSZ8864 1,2,3 4
1477 * KSZ8895 0,1,2,3 4
1478 * port_cnt is configured as 5, even though it is 4
1479 */
1480 .chip_id = KSZ8864_CHIP_ID,
1481 .dev_name = "KSZ8864",
1482 .num_vlans = 4096,
1483 .num_alus = 0,
1484 .num_statics = 32,
1485 .cpu_ports = 0x10, /* can be configured as cpu port */
1486 .port_cnt = 5, /* total cpu and user ports */
1487 .num_tx_queues = 4,
1488 .num_ipms = 4,
1489 .ops = &ksz88xx_dev_ops,
1490 .phylink_mac_ops = &ksz88x3_phylink_mac_ops,
1491 .mib_names = ksz88xx_mib_names,
1492 .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
1493 .reg_mib_cnt = MIB_COUNTER_NUM,
1494 .regs = ksz8895_regs,
1495 .masks = ksz8895_masks,
1496 .shifts = ksz8895_shifts,
1497 .supports_mii = {false, false, false, false, true},
1498 .supports_rmii = {false, false, false, false, true},
1499 .internal_phy = {false, true, true, true, false},
1500 },
1501
1502 [KSZ8895] = {
1503 .chip_id = KSZ8895_CHIP_ID,
1504 .dev_name = "KSZ8895",
1505 .num_vlans = 4096,
1506 .num_alus = 0,
1507 .num_statics = 32,
1508 .cpu_ports = 0x10, /* can be configured as cpu port */
1509 .port_cnt = 5, /* total cpu and user ports */
1510 .num_tx_queues = 4,
1511 .num_ipms = 4,
1512 .ops = &ksz88xx_dev_ops,
1513 .phylink_mac_ops = &ksz88x3_phylink_mac_ops,
1514 .mib_names = ksz88xx_mib_names,
1515 .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
1516 .reg_mib_cnt = MIB_COUNTER_NUM,
1517 .regs = ksz8895_regs,
1518 .masks = ksz8895_masks,
1519 .shifts = ksz8895_shifts,
1520 .supports_mii = {false, false, false, false, true},
1521 .supports_rmii = {false, false, false, false, true},
1522 .internal_phy = {true, true, true, true, false},
1523 },
1524
1525 [KSZ9477] = {
1526 .chip_id = KSZ9477_CHIP_ID,
1527 .dev_name = "KSZ9477",
1528 .num_vlans = 4096,
1529 .num_alus = 4096,
1530 .num_statics = 16,
1531 .cpu_ports = 0x7F, /* can be configured as cpu port */
1532 .port_cnt = 7, /* total physical port count */
1533 .port_nirqs = 4,
1534 .num_tx_queues = 4,
1535 .num_ipms = 8,
1536 .tc_cbs_supported = true,
1537 .ops = &ksz9477_dev_ops,
1538 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1539 .phy_errata_9477 = true,
1540 .mib_names = ksz9477_mib_names,
1541 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1542 .reg_mib_cnt = MIB_COUNTER_NUM,
1543 .regs = ksz9477_regs,
1544 .masks = ksz9477_masks,
1545 .shifts = ksz9477_shifts,
1546 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1547 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1548 .supports_mii = {false, false, false, false,
1549 false, true, false},
1550 .supports_rmii = {false, false, false, false,
1551 false, true, false},
1552 .supports_rgmii = {false, false, false, false,
1553 false, true, false},
1554 .internal_phy = {true, true, true, true,
1555 true, false, false},
1556 .gbit_capable = {true, true, true, true, true, true, true},
1557 .wr_table = &ksz9477_register_set,
1558 .rd_table = &ksz9477_register_set,
1559 },
1560
1561 [KSZ9896] = {
1562 .chip_id = KSZ9896_CHIP_ID,
1563 .dev_name = "KSZ9896",
1564 .num_vlans = 4096,
1565 .num_alus = 4096,
1566 .num_statics = 16,
1567 .cpu_ports = 0x3F, /* can be configured as cpu port */
1568 .port_cnt = 6, /* total physical port count */
1569 .port_nirqs = 2,
1570 .num_tx_queues = 4,
1571 .num_ipms = 8,
1572 .ops = &ksz9477_dev_ops,
1573 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1574 .phy_errata_9477 = true,
1575 .mib_names = ksz9477_mib_names,
1576 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1577 .reg_mib_cnt = MIB_COUNTER_NUM,
1578 .regs = ksz9477_regs,
1579 .masks = ksz9477_masks,
1580 .shifts = ksz9477_shifts,
1581 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1582 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1583 .supports_mii = {false, false, false, false,
1584 false, true},
1585 .supports_rmii = {false, false, false, false,
1586 false, true},
1587 .supports_rgmii = {false, false, false, false,
1588 false, true},
1589 .internal_phy = {true, true, true, true,
1590 true, false},
1591 .gbit_capable = {true, true, true, true, true, true},
1592 .wr_table = &ksz9896_register_set,
1593 .rd_table = &ksz9896_register_set,
1594 },
1595
1596 [KSZ9897] = {
1597 .chip_id = KSZ9897_CHIP_ID,
1598 .dev_name = "KSZ9897",
1599 .num_vlans = 4096,
1600 .num_alus = 4096,
1601 .num_statics = 16,
1602 .cpu_ports = 0x7F, /* can be configured as cpu port */
1603 .port_cnt = 7, /* total physical port count */
1604 .port_nirqs = 2,
1605 .num_tx_queues = 4,
1606 .num_ipms = 8,
1607 .ops = &ksz9477_dev_ops,
1608 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1609 .phy_errata_9477 = true,
1610 .mib_names = ksz9477_mib_names,
1611 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1612 .reg_mib_cnt = MIB_COUNTER_NUM,
1613 .regs = ksz9477_regs,
1614 .masks = ksz9477_masks,
1615 .shifts = ksz9477_shifts,
1616 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1617 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1618 .supports_mii = {false, false, false, false,
1619 false, true, true},
1620 .supports_rmii = {false, false, false, false,
1621 false, true, true},
1622 .supports_rgmii = {false, false, false, false,
1623 false, true, true},
1624 .internal_phy = {true, true, true, true,
1625 true, false, false},
1626 .gbit_capable = {true, true, true, true, true, true, true},
1627 },
1628
1629 [KSZ9893] = {
1630 .chip_id = KSZ9893_CHIP_ID,
1631 .dev_name = "KSZ9893",
1632 .num_vlans = 4096,
1633 .num_alus = 4096,
1634 .num_statics = 16,
1635 .cpu_ports = 0x07, /* can be configured as cpu port */
1636 .port_cnt = 3, /* total port count */
1637 .port_nirqs = 2,
1638 .num_tx_queues = 4,
1639 .num_ipms = 8,
1640 .ops = &ksz9477_dev_ops,
1641 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1642 .mib_names = ksz9477_mib_names,
1643 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1644 .reg_mib_cnt = MIB_COUNTER_NUM,
1645 .regs = ksz9477_regs,
1646 .masks = ksz9477_masks,
1647 .shifts = ksz9477_shifts,
1648 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1649 .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
1650 .supports_mii = {false, false, true},
1651 .supports_rmii = {false, false, true},
1652 .supports_rgmii = {false, false, true},
1653 .internal_phy = {true, true, false},
1654 .gbit_capable = {true, true, true},
1655 },
1656
1657 [KSZ9563] = {
1658 .chip_id = KSZ9563_CHIP_ID,
1659 .dev_name = "KSZ9563",
1660 .num_vlans = 4096,
1661 .num_alus = 4096,
1662 .num_statics = 16,
1663 .cpu_ports = 0x07, /* can be configured as cpu port */
1664 .port_cnt = 3, /* total port count */
1665 .port_nirqs = 3,
1666 .num_tx_queues = 4,
1667 .num_ipms = 8,
1668 .tc_cbs_supported = true,
1669 .ops = &ksz9477_dev_ops,
1670 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1671 .mib_names = ksz9477_mib_names,
1672 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1673 .reg_mib_cnt = MIB_COUNTER_NUM,
1674 .regs = ksz9477_regs,
1675 .masks = ksz9477_masks,
1676 .shifts = ksz9477_shifts,
1677 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1678 .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
1679 .supports_mii = {false, false, true},
1680 .supports_rmii = {false, false, true},
1681 .supports_rgmii = {false, false, true},
1682 .internal_phy = {true, true, false},
1683 .gbit_capable = {true, true, true},
1684 },
1685
1686 [KSZ8567] = {
1687 .chip_id = KSZ8567_CHIP_ID,
1688 .dev_name = "KSZ8567",
1689 .num_vlans = 4096,
1690 .num_alus = 4096,
1691 .num_statics = 16,
1692 .cpu_ports = 0x7F, /* can be configured as cpu port */
1693 .port_cnt = 7, /* total port count */
1694 .port_nirqs = 3,
1695 .num_tx_queues = 4,
1696 .num_ipms = 8,
1697 .tc_cbs_supported = true,
1698 .ops = &ksz9477_dev_ops,
1699 .phylink_mac_ops = &ksz9477_phylink_mac_ops,
1700 .phy_errata_9477 = true,
1701 .mib_names = ksz9477_mib_names,
1702 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1703 .reg_mib_cnt = MIB_COUNTER_NUM,
1704 .regs = ksz9477_regs,
1705 .masks = ksz9477_masks,
1706 .shifts = ksz9477_shifts,
1707 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1708 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1709 .supports_mii = {false, false, false, false,
1710 false, true, true},
1711 .supports_rmii = {false, false, false, false,
1712 false, true, true},
1713 .supports_rgmii = {false, false, false, false,
1714 false, true, true},
1715 .internal_phy = {true, true, true, true,
1716 true, false, false},
1717 .gbit_capable = {false, false, false, false, false,
1718 true, true},
1719 },
1720
1721 [KSZ9567] = {
1722 .chip_id = KSZ9567_CHIP_ID,
1723 .dev_name = "KSZ9567",
1724 .num_vlans = 4096,
1725 .num_alus = 4096,
1726 .num_statics = 16,
1727 .cpu_ports = 0x7F, /* can be configured as cpu port */
1728 .port_cnt = 7, /* total physical port count */
1729 .port_nirqs = 3,
1730 .num_tx_queues = 4,
1731 .num_ipms = 8,
1732 .tc_cbs_supported = true,
1733 .ops = &ksz9477_dev_ops,
1734 .mib_names = ksz9477_mib_names,
1735 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1736 .reg_mib_cnt = MIB_COUNTER_NUM,
1737 .regs = ksz9477_regs,
1738 .masks = ksz9477_masks,
1739 .shifts = ksz9477_shifts,
1740 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1741 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1742 .supports_mii = {false, false, false, false,
1743 false, true, true},
1744 .supports_rmii = {false, false, false, false,
1745 false, true, true},
1746 .supports_rgmii = {false, false, false, false,
1747 false, true, true},
1748 .internal_phy = {true, true, true, true,
1749 true, false, false},
1750 .gbit_capable = {true, true, true, true, true, true, true},
1751 },
1752
1753 [LAN9370] = {
1754 .chip_id = LAN9370_CHIP_ID,
1755 .dev_name = "LAN9370",
1756 .num_vlans = 4096,
1757 .num_alus = 1024,
1758 .num_statics = 256,
1759 .cpu_ports = 0x10, /* can be configured as cpu port */
1760 .port_cnt = 5, /* total physical port count */
1761 .port_nirqs = 6,
1762 .num_tx_queues = 8,
1763 .num_ipms = 8,
1764 .tc_cbs_supported = true,
1765 .ops = &lan937x_dev_ops,
1766 .phylink_mac_ops = &lan937x_phylink_mac_ops,
1767 .mib_names = ksz9477_mib_names,
1768 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1769 .reg_mib_cnt = MIB_COUNTER_NUM,
1770 .regs = ksz9477_regs,
1771 .masks = lan937x_masks,
1772 .shifts = lan937x_shifts,
1773 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1774 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1775 .supports_mii = {false, false, false, false, true},
1776 .supports_rmii = {false, false, false, false, true},
1777 .supports_rgmii = {false, false, false, false, true},
1778 .internal_phy = {true, true, true, true, false},
1779 },
1780
1781 [LAN9371] = {
1782 .chip_id = LAN9371_CHIP_ID,
1783 .dev_name = "LAN9371",
1784 .num_vlans = 4096,
1785 .num_alus = 1024,
1786 .num_statics = 256,
1787 .cpu_ports = 0x30, /* can be configured as cpu port */
1788 .port_cnt = 6, /* total physical port count */
1789 .port_nirqs = 6,
1790 .num_tx_queues = 8,
1791 .num_ipms = 8,
1792 .tc_cbs_supported = true,
1793 .ops = &lan937x_dev_ops,
1794 .phylink_mac_ops = &lan937x_phylink_mac_ops,
1795 .mib_names = ksz9477_mib_names,
1796 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1797 .reg_mib_cnt = MIB_COUNTER_NUM,
1798 .regs = ksz9477_regs,
1799 .masks = lan937x_masks,
1800 .shifts = lan937x_shifts,
1801 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1802 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1803 .supports_mii = {false, false, false, false, true, true},
1804 .supports_rmii = {false, false, false, false, true, true},
1805 .supports_rgmii = {false, false, false, false, true, true},
1806 .internal_phy = {true, true, true, true, false, false},
1807 },
1808
1809 [LAN9372] = {
1810 .chip_id = LAN9372_CHIP_ID,
1811 .dev_name = "LAN9372",
1812 .num_vlans = 4096,
1813 .num_alus = 1024,
1814 .num_statics = 256,
1815 .cpu_ports = 0x30, /* can be configured as cpu port */
1816 .port_cnt = 8, /* total physical port count */
1817 .port_nirqs = 6,
1818 .num_tx_queues = 8,
1819 .num_ipms = 8,
1820 .tc_cbs_supported = true,
1821 .ops = &lan937x_dev_ops,
1822 .phylink_mac_ops = &lan937x_phylink_mac_ops,
1823 .mib_names = ksz9477_mib_names,
1824 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1825 .reg_mib_cnt = MIB_COUNTER_NUM,
1826 .regs = ksz9477_regs,
1827 .masks = lan937x_masks,
1828 .shifts = lan937x_shifts,
1829 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1830 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1831 .supports_mii = {false, false, false, false,
1832 true, true, false, false},
1833 .supports_rmii = {false, false, false, false,
1834 true, true, false, false},
1835 .supports_rgmii = {false, false, false, false,
1836 true, true, false, false},
1837 .internal_phy = {true, true, true, true,
1838 false, false, true, true},
1839 },
1840
1841 [LAN9373] = {
1842 .chip_id = LAN9373_CHIP_ID,
1843 .dev_name = "LAN9373",
1844 .num_vlans = 4096,
1845 .num_alus = 1024,
1846 .num_statics = 256,
1847 .cpu_ports = 0x38, /* can be configured as cpu port */
1848 .port_cnt = 5, /* total physical port count */
1849 .port_nirqs = 6,
1850 .num_tx_queues = 8,
1851 .num_ipms = 8,
1852 .tc_cbs_supported = true,
1853 .ops = &lan937x_dev_ops,
1854 .phylink_mac_ops = &lan937x_phylink_mac_ops,
1855 .mib_names = ksz9477_mib_names,
1856 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1857 .reg_mib_cnt = MIB_COUNTER_NUM,
1858 .regs = ksz9477_regs,
1859 .masks = lan937x_masks,
1860 .shifts = lan937x_shifts,
1861 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1862 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1863 .supports_mii = {false, false, false, false,
1864 true, true, false, false},
1865 .supports_rmii = {false, false, false, false,
1866 true, true, false, false},
1867 .supports_rgmii = {false, false, false, false,
1868 true, true, false, false},
1869 .internal_phy = {true, true, true, false,
1870 false, false, true, true},
1871 },
1872
1873 [LAN9374] = {
1874 .chip_id = LAN9374_CHIP_ID,
1875 .dev_name = "LAN9374",
1876 .num_vlans = 4096,
1877 .num_alus = 1024,
1878 .num_statics = 256,
1879 .cpu_ports = 0x30, /* can be configured as cpu port */
1880 .port_cnt = 8, /* total physical port count */
1881 .port_nirqs = 6,
1882 .num_tx_queues = 8,
1883 .num_ipms = 8,
1884 .tc_cbs_supported = true,
1885 .ops = &lan937x_dev_ops,
1886 .phylink_mac_ops = &lan937x_phylink_mac_ops,
1887 .mib_names = ksz9477_mib_names,
1888 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1889 .reg_mib_cnt = MIB_COUNTER_NUM,
1890 .regs = ksz9477_regs,
1891 .masks = lan937x_masks,
1892 .shifts = lan937x_shifts,
1893 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1894 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1895 .supports_mii = {false, false, false, false,
1896 true, true, false, false},
1897 .supports_rmii = {false, false, false, false,
1898 true, true, false, false},
1899 .supports_rgmii = {false, false, false, false,
1900 true, true, false, false},
1901 .internal_phy = {true, true, true, true,
1902 false, false, true, true},
1903 },
1904 };
1905 EXPORT_SYMBOL_GPL(ksz_switch_chips);
1906
ksz_lookup_info(unsigned int prod_num)1907 static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num)
1908 {
1909 int i;
1910
1911 for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
1912 const struct ksz_chip_data *chip = &ksz_switch_chips[i];
1913
1914 if (chip->chip_id == prod_num)
1915 return chip;
1916 }
1917
1918 return NULL;
1919 }
1920
ksz_check_device_id(struct ksz_device * dev)1921 static int ksz_check_device_id(struct ksz_device *dev)
1922 {
1923 const struct ksz_chip_data *expected_chip_data;
1924 u32 expected_chip_id;
1925
1926 if (dev->pdata) {
1927 expected_chip_id = dev->pdata->chip_id;
1928 expected_chip_data = ksz_lookup_info(expected_chip_id);
1929 if (WARN_ON(!expected_chip_data))
1930 return -ENODEV;
1931 } else {
1932 expected_chip_data = of_device_get_match_data(dev->dev);
1933 expected_chip_id = expected_chip_data->chip_id;
1934 }
1935
1936 if (expected_chip_id != dev->chip_id) {
1937 dev_err(dev->dev,
1938 "Device tree specifies chip %s but found %s, please fix it!\n",
1939 expected_chip_data->dev_name, dev->info->dev_name);
1940 return -ENODEV;
1941 }
1942
1943 return 0;
1944 }
1945
ksz_phylink_get_caps(struct dsa_switch * ds,int port,struct phylink_config * config)1946 static void ksz_phylink_get_caps(struct dsa_switch *ds, int port,
1947 struct phylink_config *config)
1948 {
1949 struct ksz_device *dev = ds->priv;
1950
1951 if (dev->info->supports_mii[port])
1952 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1953
1954 if (dev->info->supports_rmii[port])
1955 __set_bit(PHY_INTERFACE_MODE_RMII,
1956 config->supported_interfaces);
1957
1958 if (dev->info->supports_rgmii[port])
1959 phy_interface_set_rgmii(config->supported_interfaces);
1960
1961 if (dev->info->internal_phy[port]) {
1962 __set_bit(PHY_INTERFACE_MODE_INTERNAL,
1963 config->supported_interfaces);
1964 /* Compatibility for phylib's default interface type when the
1965 * phy-mode property is absent
1966 */
1967 __set_bit(PHY_INTERFACE_MODE_GMII,
1968 config->supported_interfaces);
1969 }
1970
1971 if (dev->dev_ops->get_caps)
1972 dev->dev_ops->get_caps(dev, port, config);
1973 }
1974
ksz_r_mib_stats64(struct ksz_device * dev,int port)1975 void ksz_r_mib_stats64(struct ksz_device *dev, int port)
1976 {
1977 struct ethtool_pause_stats *pstats;
1978 struct rtnl_link_stats64 *stats;
1979 struct ksz_stats_raw *raw;
1980 struct ksz_port_mib *mib;
1981 int ret;
1982
1983 mib = &dev->ports[port].mib;
1984 stats = &mib->stats64;
1985 pstats = &mib->pause_stats;
1986 raw = (struct ksz_stats_raw *)mib->counters;
1987
1988 spin_lock(&mib->stats64_lock);
1989
1990 stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
1991 raw->rx_pause;
1992 stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
1993 raw->tx_pause;
1994
1995 /* HW counters are counting bytes + FCS which is not acceptable
1996 * for rtnl_link_stats64 interface
1997 */
1998 stats->rx_bytes = raw->rx_total - stats->rx_packets * ETH_FCS_LEN;
1999 stats->tx_bytes = raw->tx_total - stats->tx_packets * ETH_FCS_LEN;
2000
2001 stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
2002 raw->rx_oversize;
2003
2004 stats->rx_crc_errors = raw->rx_crc_err;
2005 stats->rx_frame_errors = raw->rx_align_err;
2006 stats->rx_dropped = raw->rx_discards;
2007 stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
2008 stats->rx_frame_errors + stats->rx_dropped;
2009
2010 stats->tx_window_errors = raw->tx_late_col;
2011 stats->tx_fifo_errors = raw->tx_discards;
2012 stats->tx_aborted_errors = raw->tx_exc_col;
2013 stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
2014 stats->tx_aborted_errors;
2015
2016 stats->multicast = raw->rx_mcast;
2017 stats->collisions = raw->tx_total_col;
2018
2019 pstats->tx_pause_frames = raw->tx_pause;
2020 pstats->rx_pause_frames = raw->rx_pause;
2021
2022 spin_unlock(&mib->stats64_lock);
2023
2024 if (dev->info->phy_errata_9477) {
2025 ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col);
2026 if (ret)
2027 dev_err(dev->dev, "Failed to monitor transmission halt\n");
2028 }
2029 }
2030
ksz88xx_r_mib_stats64(struct ksz_device * dev,int port)2031 void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port)
2032 {
2033 struct ethtool_pause_stats *pstats;
2034 struct rtnl_link_stats64 *stats;
2035 struct ksz88xx_stats_raw *raw;
2036 struct ksz_port_mib *mib;
2037
2038 mib = &dev->ports[port].mib;
2039 stats = &mib->stats64;
2040 pstats = &mib->pause_stats;
2041 raw = (struct ksz88xx_stats_raw *)mib->counters;
2042
2043 spin_lock(&mib->stats64_lock);
2044
2045 stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
2046 raw->rx_pause;
2047 stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
2048 raw->tx_pause;
2049
2050 /* HW counters are counting bytes + FCS which is not acceptable
2051 * for rtnl_link_stats64 interface
2052 */
2053 stats->rx_bytes = raw->rx + raw->rx_hi - stats->rx_packets * ETH_FCS_LEN;
2054 stats->tx_bytes = raw->tx + raw->tx_hi - stats->tx_packets * ETH_FCS_LEN;
2055
2056 stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
2057 raw->rx_oversize;
2058
2059 stats->rx_crc_errors = raw->rx_crc_err;
2060 stats->rx_frame_errors = raw->rx_align_err;
2061 stats->rx_dropped = raw->rx_discards;
2062 stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
2063 stats->rx_frame_errors + stats->rx_dropped;
2064
2065 stats->tx_window_errors = raw->tx_late_col;
2066 stats->tx_fifo_errors = raw->tx_discards;
2067 stats->tx_aborted_errors = raw->tx_exc_col;
2068 stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
2069 stats->tx_aborted_errors;
2070
2071 stats->multicast = raw->rx_mcast;
2072 stats->collisions = raw->tx_total_col;
2073
2074 pstats->tx_pause_frames = raw->tx_pause;
2075 pstats->rx_pause_frames = raw->rx_pause;
2076
2077 spin_unlock(&mib->stats64_lock);
2078 }
2079
ksz_get_stats64(struct dsa_switch * ds,int port,struct rtnl_link_stats64 * s)2080 static void ksz_get_stats64(struct dsa_switch *ds, int port,
2081 struct rtnl_link_stats64 *s)
2082 {
2083 struct ksz_device *dev = ds->priv;
2084 struct ksz_port_mib *mib;
2085
2086 mib = &dev->ports[port].mib;
2087
2088 spin_lock(&mib->stats64_lock);
2089 memcpy(s, &mib->stats64, sizeof(*s));
2090 spin_unlock(&mib->stats64_lock);
2091 }
2092
ksz_get_pause_stats(struct dsa_switch * ds,int port,struct ethtool_pause_stats * pause_stats)2093 static void ksz_get_pause_stats(struct dsa_switch *ds, int port,
2094 struct ethtool_pause_stats *pause_stats)
2095 {
2096 struct ksz_device *dev = ds->priv;
2097 struct ksz_port_mib *mib;
2098
2099 mib = &dev->ports[port].mib;
2100
2101 spin_lock(&mib->stats64_lock);
2102 memcpy(pause_stats, &mib->pause_stats, sizeof(*pause_stats));
2103 spin_unlock(&mib->stats64_lock);
2104 }
2105
ksz_get_strings(struct dsa_switch * ds,int port,u32 stringset,uint8_t * buf)2106 static void ksz_get_strings(struct dsa_switch *ds, int port,
2107 u32 stringset, uint8_t *buf)
2108 {
2109 struct ksz_device *dev = ds->priv;
2110 int i;
2111
2112 if (stringset != ETH_SS_STATS)
2113 return;
2114
2115 for (i = 0; i < dev->info->mib_cnt; i++) {
2116 memcpy(buf + i * ETH_GSTRING_LEN,
2117 dev->info->mib_names[i].string, ETH_GSTRING_LEN);
2118 }
2119 }
2120
2121 /**
2122 * ksz_update_port_member - Adjust port forwarding rules based on STP state and
2123 * isolation settings.
2124 * @dev: A pointer to the struct ksz_device representing the device.
2125 * @port: The port number to adjust.
2126 *
2127 * This function dynamically adjusts the port membership configuration for a
2128 * specified port and other device ports, based on Spanning Tree Protocol (STP)
2129 * states and port isolation settings. Each port, including the CPU port, has a
2130 * membership register, represented as a bitfield, where each bit corresponds
2131 * to a port number. A set bit indicates permission to forward frames to that
2132 * port. This function iterates over all ports, updating the membership register
2133 * to reflect current forwarding permissions:
2134 *
2135 * 1. Forwards frames only to ports that are part of the same bridge group and
2136 * in the BR_STATE_FORWARDING state.
2137 * 2. Takes into account the isolation status of ports; ports in the
2138 * BR_STATE_FORWARDING state with BR_ISOLATED configuration will not forward
2139 * frames to each other, even if they are in the same bridge group.
2140 * 3. Ensures that the CPU port is included in the membership based on its
2141 * upstream port configuration, allowing for management and control traffic
2142 * to flow as required.
2143 */
ksz_update_port_member(struct ksz_device * dev,int port)2144 static void ksz_update_port_member(struct ksz_device *dev, int port)
2145 {
2146 struct ksz_port *p = &dev->ports[port];
2147 struct dsa_switch *ds = dev->ds;
2148 u8 port_member = 0, cpu_port;
2149 const struct dsa_port *dp;
2150 int i, j;
2151
2152 if (!dsa_is_user_port(ds, port))
2153 return;
2154
2155 dp = dsa_to_port(ds, port);
2156 cpu_port = BIT(dsa_upstream_port(ds, port));
2157
2158 for (i = 0; i < ds->num_ports; i++) {
2159 const struct dsa_port *other_dp = dsa_to_port(ds, i);
2160 struct ksz_port *other_p = &dev->ports[i];
2161 u8 val = 0;
2162
2163 if (!dsa_is_user_port(ds, i))
2164 continue;
2165 if (port == i)
2166 continue;
2167 if (!dsa_port_bridge_same(dp, other_dp))
2168 continue;
2169 if (other_p->stp_state != BR_STATE_FORWARDING)
2170 continue;
2171
2172 /* At this point we know that "port" and "other" port [i] are in
2173 * the same bridge group and that "other" port [i] is in
2174 * forwarding stp state. If "port" is also in forwarding stp
2175 * state, we can allow forwarding from port [port] to port [i].
2176 * Except if both ports are isolated.
2177 */
2178 if (p->stp_state == BR_STATE_FORWARDING &&
2179 !(p->isolated && other_p->isolated)) {
2180 val |= BIT(port);
2181 port_member |= BIT(i);
2182 }
2183
2184 /* Retain port [i]'s relationship to other ports than [port] */
2185 for (j = 0; j < ds->num_ports; j++) {
2186 const struct dsa_port *third_dp;
2187 struct ksz_port *third_p;
2188
2189 if (j == i)
2190 continue;
2191 if (j == port)
2192 continue;
2193 if (!dsa_is_user_port(ds, j))
2194 continue;
2195 third_p = &dev->ports[j];
2196 if (third_p->stp_state != BR_STATE_FORWARDING)
2197 continue;
2198
2199 third_dp = dsa_to_port(ds, j);
2200
2201 /* Now we updating relation of the "other" port [i] to
2202 * the "third" port [j]. We already know that "other"
2203 * port [i] is in forwarding stp state and that "third"
2204 * port [j] is in forwarding stp state too.
2205 * We need to check if "other" port [i] and "third" port
2206 * [j] are in the same bridge group and not isolated
2207 * before allowing forwarding from port [i] to port [j].
2208 */
2209 if (dsa_port_bridge_same(other_dp, third_dp) &&
2210 !(other_p->isolated && third_p->isolated))
2211 val |= BIT(j);
2212 }
2213
2214 dev->dev_ops->cfg_port_member(dev, i, val | cpu_port);
2215 }
2216
2217 dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
2218 }
2219
ksz_sw_mdio_read(struct mii_bus * bus,int addr,int regnum)2220 static int ksz_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
2221 {
2222 struct ksz_device *dev = bus->priv;
2223 u16 val;
2224 int ret;
2225
2226 ret = dev->dev_ops->r_phy(dev, addr, regnum, &val);
2227 if (ret < 0)
2228 return ret;
2229
2230 return val;
2231 }
2232
ksz_sw_mdio_write(struct mii_bus * bus,int addr,int regnum,u16 val)2233 static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
2234 u16 val)
2235 {
2236 struct ksz_device *dev = bus->priv;
2237
2238 return dev->dev_ops->w_phy(dev, addr, regnum, val);
2239 }
2240
ksz_irq_phy_setup(struct ksz_device * dev)2241 static int ksz_irq_phy_setup(struct ksz_device *dev)
2242 {
2243 struct dsa_switch *ds = dev->ds;
2244 int phy;
2245 int irq;
2246 int ret;
2247
2248 for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) {
2249 if (BIT(phy) & ds->phys_mii_mask) {
2250 irq = irq_find_mapping(dev->ports[phy].pirq.domain,
2251 PORT_SRC_PHY_INT);
2252 if (irq < 0) {
2253 ret = irq;
2254 goto out;
2255 }
2256 ds->user_mii_bus->irq[phy] = irq;
2257 }
2258 }
2259 return 0;
2260 out:
2261 while (phy--)
2262 if (BIT(phy) & ds->phys_mii_mask)
2263 irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
2264
2265 return ret;
2266 }
2267
ksz_irq_phy_free(struct ksz_device * dev)2268 static void ksz_irq_phy_free(struct ksz_device *dev)
2269 {
2270 struct dsa_switch *ds = dev->ds;
2271 int phy;
2272
2273 for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++)
2274 if (BIT(phy) & ds->phys_mii_mask)
2275 irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
2276 }
2277
ksz_mdio_register(struct ksz_device * dev)2278 static int ksz_mdio_register(struct ksz_device *dev)
2279 {
2280 struct dsa_switch *ds = dev->ds;
2281 struct device_node *mdio_np;
2282 struct mii_bus *bus;
2283 int ret;
2284
2285 mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio");
2286 if (!mdio_np)
2287 return 0;
2288
2289 bus = devm_mdiobus_alloc(ds->dev);
2290 if (!bus) {
2291 of_node_put(mdio_np);
2292 return -ENOMEM;
2293 }
2294
2295 bus->priv = dev;
2296 bus->read = ksz_sw_mdio_read;
2297 bus->write = ksz_sw_mdio_write;
2298 bus->name = "ksz user smi";
2299 snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
2300 bus->parent = ds->dev;
2301 bus->phy_mask = ~ds->phys_mii_mask;
2302
2303 ds->user_mii_bus = bus;
2304
2305 if (dev->irq > 0) {
2306 ret = ksz_irq_phy_setup(dev);
2307 if (ret) {
2308 of_node_put(mdio_np);
2309 return ret;
2310 }
2311 }
2312
2313 ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
2314 if (ret) {
2315 dev_err(ds->dev, "unable to register MDIO bus %s\n",
2316 bus->id);
2317 if (dev->irq > 0)
2318 ksz_irq_phy_free(dev);
2319 }
2320
2321 of_node_put(mdio_np);
2322
2323 return ret;
2324 }
2325
ksz_irq_mask(struct irq_data * d)2326 static void ksz_irq_mask(struct irq_data *d)
2327 {
2328 struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
2329
2330 kirq->masked |= BIT(d->hwirq);
2331 }
2332
ksz_irq_unmask(struct irq_data * d)2333 static void ksz_irq_unmask(struct irq_data *d)
2334 {
2335 struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
2336
2337 kirq->masked &= ~BIT(d->hwirq);
2338 }
2339
ksz_irq_bus_lock(struct irq_data * d)2340 static void ksz_irq_bus_lock(struct irq_data *d)
2341 {
2342 struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
2343
2344 mutex_lock(&kirq->dev->lock_irq);
2345 }
2346
ksz_irq_bus_sync_unlock(struct irq_data * d)2347 static void ksz_irq_bus_sync_unlock(struct irq_data *d)
2348 {
2349 struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
2350 struct ksz_device *dev = kirq->dev;
2351 int ret;
2352
2353 ret = ksz_write8(dev, kirq->reg_mask, kirq->masked);
2354 if (ret)
2355 dev_err(dev->dev, "failed to change IRQ mask\n");
2356
2357 mutex_unlock(&dev->lock_irq);
2358 }
2359
2360 static const struct irq_chip ksz_irq_chip = {
2361 .name = "ksz-irq",
2362 .irq_mask = ksz_irq_mask,
2363 .irq_unmask = ksz_irq_unmask,
2364 .irq_bus_lock = ksz_irq_bus_lock,
2365 .irq_bus_sync_unlock = ksz_irq_bus_sync_unlock,
2366 };
2367
ksz_irq_domain_map(struct irq_domain * d,unsigned int irq,irq_hw_number_t hwirq)2368 static int ksz_irq_domain_map(struct irq_domain *d,
2369 unsigned int irq, irq_hw_number_t hwirq)
2370 {
2371 irq_set_chip_data(irq, d->host_data);
2372 irq_set_chip_and_handler(irq, &ksz_irq_chip, handle_level_irq);
2373 irq_set_noprobe(irq);
2374
2375 return 0;
2376 }
2377
2378 static const struct irq_domain_ops ksz_irq_domain_ops = {
2379 .map = ksz_irq_domain_map,
2380 .xlate = irq_domain_xlate_twocell,
2381 };
2382
ksz_irq_free(struct ksz_irq * kirq)2383 static void ksz_irq_free(struct ksz_irq *kirq)
2384 {
2385 int irq, virq;
2386
2387 free_irq(kirq->irq_num, kirq);
2388
2389 for (irq = 0; irq < kirq->nirqs; irq++) {
2390 virq = irq_find_mapping(kirq->domain, irq);
2391 irq_dispose_mapping(virq);
2392 }
2393
2394 irq_domain_remove(kirq->domain);
2395 }
2396
ksz_irq_thread_fn(int irq,void * dev_id)2397 static irqreturn_t ksz_irq_thread_fn(int irq, void *dev_id)
2398 {
2399 struct ksz_irq *kirq = dev_id;
2400 unsigned int nhandled = 0;
2401 struct ksz_device *dev;
2402 unsigned int sub_irq;
2403 u8 data;
2404 int ret;
2405 u8 n;
2406
2407 dev = kirq->dev;
2408
2409 /* Read interrupt status register */
2410 ret = ksz_read8(dev, kirq->reg_status, &data);
2411 if (ret)
2412 goto out;
2413
2414 for (n = 0; n < kirq->nirqs; ++n) {
2415 if (data & BIT(n)) {
2416 sub_irq = irq_find_mapping(kirq->domain, n);
2417 handle_nested_irq(sub_irq);
2418 ++nhandled;
2419 }
2420 }
2421 out:
2422 return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
2423 }
2424
ksz_irq_common_setup(struct ksz_device * dev,struct ksz_irq * kirq)2425 static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq)
2426 {
2427 int ret, n;
2428
2429 kirq->dev = dev;
2430 kirq->masked = ~0;
2431
2432 kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0,
2433 &ksz_irq_domain_ops, kirq);
2434 if (!kirq->domain)
2435 return -ENOMEM;
2436
2437 for (n = 0; n < kirq->nirqs; n++)
2438 irq_create_mapping(kirq->domain, n);
2439
2440 ret = request_threaded_irq(kirq->irq_num, NULL, ksz_irq_thread_fn,
2441 IRQF_ONESHOT, kirq->name, kirq);
2442 if (ret)
2443 goto out;
2444
2445 return 0;
2446
2447 out:
2448 ksz_irq_free(kirq);
2449
2450 return ret;
2451 }
2452
ksz_girq_setup(struct ksz_device * dev)2453 static int ksz_girq_setup(struct ksz_device *dev)
2454 {
2455 struct ksz_irq *girq = &dev->girq;
2456
2457 girq->nirqs = dev->info->port_cnt;
2458 girq->reg_mask = REG_SW_PORT_INT_MASK__1;
2459 girq->reg_status = REG_SW_PORT_INT_STATUS__1;
2460 snprintf(girq->name, sizeof(girq->name), "global_port_irq");
2461
2462 girq->irq_num = dev->irq;
2463
2464 return ksz_irq_common_setup(dev, girq);
2465 }
2466
ksz_pirq_setup(struct ksz_device * dev,u8 p)2467 static int ksz_pirq_setup(struct ksz_device *dev, u8 p)
2468 {
2469 struct ksz_irq *pirq = &dev->ports[p].pirq;
2470
2471 pirq->nirqs = dev->info->port_nirqs;
2472 pirq->reg_mask = dev->dev_ops->get_port_addr(p, REG_PORT_INT_MASK);
2473 pirq->reg_status = dev->dev_ops->get_port_addr(p, REG_PORT_INT_STATUS);
2474 snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p);
2475
2476 pirq->irq_num = irq_find_mapping(dev->girq.domain, p);
2477 if (pirq->irq_num < 0)
2478 return pirq->irq_num;
2479
2480 return ksz_irq_common_setup(dev, pirq);
2481 }
2482
2483 static int ksz_parse_drive_strength(struct ksz_device *dev);
2484
ksz_setup(struct dsa_switch * ds)2485 static int ksz_setup(struct dsa_switch *ds)
2486 {
2487 struct ksz_device *dev = ds->priv;
2488 struct dsa_port *dp;
2489 struct ksz_port *p;
2490 const u16 *regs;
2491 int ret;
2492
2493 regs = dev->info->regs;
2494
2495 dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
2496 dev->info->num_vlans, GFP_KERNEL);
2497 if (!dev->vlan_cache)
2498 return -ENOMEM;
2499
2500 ret = dev->dev_ops->reset(dev);
2501 if (ret) {
2502 dev_err(ds->dev, "failed to reset switch\n");
2503 return ret;
2504 }
2505
2506 ret = ksz_parse_drive_strength(dev);
2507 if (ret)
2508 return ret;
2509
2510 /* set broadcast storm protection 10% rate */
2511 regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL],
2512 BROADCAST_STORM_RATE,
2513 (BROADCAST_STORM_VALUE *
2514 BROADCAST_STORM_PROT_RATE) / 100);
2515
2516 dev->dev_ops->config_cpu_port(ds);
2517
2518 dev->dev_ops->enable_stp_addr(dev);
2519
2520 ds->num_tx_queues = dev->info->num_tx_queues;
2521
2522 regmap_update_bits(ksz_regmap_8(dev), regs[S_MULTICAST_CTRL],
2523 MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
2524
2525 ksz_init_mib_timer(dev);
2526
2527 ds->configure_vlan_while_not_filtering = false;
2528 ds->dscp_prio_mapping_is_global = true;
2529
2530 if (dev->dev_ops->setup) {
2531 ret = dev->dev_ops->setup(ds);
2532 if (ret)
2533 return ret;
2534 }
2535
2536 /* Start with learning disabled on standalone user ports, and enabled
2537 * on the CPU port. In lack of other finer mechanisms, learning on the
2538 * CPU port will avoid flooding bridge local addresses on the network
2539 * in some cases.
2540 */
2541 p = &dev->ports[dev->cpu_port];
2542 p->learning = true;
2543
2544 if (dev->irq > 0) {
2545 ret = ksz_girq_setup(dev);
2546 if (ret)
2547 return ret;
2548
2549 dsa_switch_for_each_user_port(dp, dev->ds) {
2550 ret = ksz_pirq_setup(dev, dp->index);
2551 if (ret)
2552 goto out_girq;
2553
2554 ret = ksz_ptp_irq_setup(ds, dp->index);
2555 if (ret)
2556 goto out_pirq;
2557 }
2558 }
2559
2560 ret = ksz_ptp_clock_register(ds);
2561 if (ret) {
2562 dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret);
2563 goto out_ptpirq;
2564 }
2565
2566 ret = ksz_mdio_register(dev);
2567 if (ret < 0) {
2568 dev_err(dev->dev, "failed to register the mdio");
2569 goto out_ptp_clock_unregister;
2570 }
2571
2572 ret = ksz_dcb_init(dev);
2573 if (ret)
2574 goto out_ptp_clock_unregister;
2575
2576 /* start switch */
2577 regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
2578 SW_START, SW_START);
2579
2580 return 0;
2581
2582 out_ptp_clock_unregister:
2583 ksz_ptp_clock_unregister(ds);
2584 out_ptpirq:
2585 if (dev->irq > 0)
2586 dsa_switch_for_each_user_port(dp, dev->ds)
2587 ksz_ptp_irq_free(ds, dp->index);
2588 out_pirq:
2589 if (dev->irq > 0)
2590 dsa_switch_for_each_user_port(dp, dev->ds)
2591 ksz_irq_free(&dev->ports[dp->index].pirq);
2592 out_girq:
2593 if (dev->irq > 0)
2594 ksz_irq_free(&dev->girq);
2595
2596 return ret;
2597 }
2598
ksz_teardown(struct dsa_switch * ds)2599 static void ksz_teardown(struct dsa_switch *ds)
2600 {
2601 struct ksz_device *dev = ds->priv;
2602 struct dsa_port *dp;
2603
2604 ksz_ptp_clock_unregister(ds);
2605
2606 if (dev->irq > 0) {
2607 dsa_switch_for_each_user_port(dp, dev->ds) {
2608 ksz_ptp_irq_free(ds, dp->index);
2609
2610 ksz_irq_free(&dev->ports[dp->index].pirq);
2611 }
2612
2613 ksz_irq_free(&dev->girq);
2614 }
2615
2616 if (dev->dev_ops->teardown)
2617 dev->dev_ops->teardown(ds);
2618 }
2619
port_r_cnt(struct ksz_device * dev,int port)2620 static void port_r_cnt(struct ksz_device *dev, int port)
2621 {
2622 struct ksz_port_mib *mib = &dev->ports[port].mib;
2623 u64 *dropped;
2624
2625 /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
2626 while (mib->cnt_ptr < dev->info->reg_mib_cnt) {
2627 dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
2628 &mib->counters[mib->cnt_ptr]);
2629 ++mib->cnt_ptr;
2630 }
2631
2632 /* last one in storage */
2633 dropped = &mib->counters[dev->info->mib_cnt];
2634
2635 /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
2636 while (mib->cnt_ptr < dev->info->mib_cnt) {
2637 dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
2638 dropped, &mib->counters[mib->cnt_ptr]);
2639 ++mib->cnt_ptr;
2640 }
2641 mib->cnt_ptr = 0;
2642 }
2643
ksz_mib_read_work(struct work_struct * work)2644 static void ksz_mib_read_work(struct work_struct *work)
2645 {
2646 struct ksz_device *dev = container_of(work, struct ksz_device,
2647 mib_read.work);
2648 struct ksz_port_mib *mib;
2649 struct ksz_port *p;
2650 int i;
2651
2652 for (i = 0; i < dev->info->port_cnt; i++) {
2653 if (dsa_is_unused_port(dev->ds, i))
2654 continue;
2655
2656 p = &dev->ports[i];
2657 mib = &p->mib;
2658 mutex_lock(&mib->cnt_mutex);
2659
2660 /* Only read MIB counters when the port is told to do.
2661 * If not, read only dropped counters when link is not up.
2662 */
2663 if (!p->read) {
2664 const struct dsa_port *dp = dsa_to_port(dev->ds, i);
2665
2666 if (!netif_carrier_ok(dp->user))
2667 mib->cnt_ptr = dev->info->reg_mib_cnt;
2668 }
2669 port_r_cnt(dev, i);
2670 p->read = false;
2671
2672 if (dev->dev_ops->r_mib_stat64)
2673 dev->dev_ops->r_mib_stat64(dev, i);
2674
2675 mutex_unlock(&mib->cnt_mutex);
2676 }
2677
2678 schedule_delayed_work(&dev->mib_read, dev->mib_read_interval);
2679 }
2680
ksz_init_mib_timer(struct ksz_device * dev)2681 void ksz_init_mib_timer(struct ksz_device *dev)
2682 {
2683 int i;
2684
2685 INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work);
2686
2687 for (i = 0; i < dev->info->port_cnt; i++) {
2688 struct ksz_port_mib *mib = &dev->ports[i].mib;
2689
2690 dev->dev_ops->port_init_cnt(dev, i);
2691
2692 mib->cnt_ptr = 0;
2693 memset(mib->counters, 0, dev->info->mib_cnt * sizeof(u64));
2694 }
2695 }
2696
ksz_phy_read16(struct dsa_switch * ds,int addr,int reg)2697 static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
2698 {
2699 struct ksz_device *dev = ds->priv;
2700 u16 val = 0xffff;
2701 int ret;
2702
2703 ret = dev->dev_ops->r_phy(dev, addr, reg, &val);
2704 if (ret)
2705 return ret;
2706
2707 return val;
2708 }
2709
ksz_phy_write16(struct dsa_switch * ds,int addr,int reg,u16 val)2710 static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
2711 {
2712 struct ksz_device *dev = ds->priv;
2713 int ret;
2714
2715 ret = dev->dev_ops->w_phy(dev, addr, reg, val);
2716 if (ret)
2717 return ret;
2718
2719 return 0;
2720 }
2721
ksz_get_phy_flags(struct dsa_switch * ds,int port)2722 static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
2723 {
2724 struct ksz_device *dev = ds->priv;
2725
2726 switch (dev->chip_id) {
2727 case KSZ88X3_CHIP_ID:
2728 /* Silicon Errata Sheet (DS80000830A):
2729 * Port 1 does not work with LinkMD Cable-Testing.
2730 * Port 1 does not respond to received PAUSE control frames.
2731 */
2732 if (!port)
2733 return MICREL_KSZ8_P1_ERRATA;
2734 break;
2735 case KSZ8567_CHIP_ID:
2736 case KSZ9477_CHIP_ID:
2737 case KSZ9567_CHIP_ID:
2738 case KSZ9896_CHIP_ID:
2739 case KSZ9897_CHIP_ID:
2740 /* KSZ9477 Errata DS80000754C
2741 *
2742 * Module 4: Energy Efficient Ethernet (EEE) feature select must
2743 * be manually disabled
2744 * The EEE feature is enabled by default, but it is not fully
2745 * operational. It must be manually disabled through register
2746 * controls. If not disabled, the PHY ports can auto-negotiate
2747 * to enable EEE, and this feature can cause link drops when
2748 * linked to another device supporting EEE.
2749 *
2750 * The same item appears in the errata for the KSZ9567, KSZ9896,
2751 * and KSZ9897.
2752 *
2753 * A similar item appears in the errata for the KSZ8567, but
2754 * provides an alternative workaround. For now, use the simple
2755 * workaround of disabling the EEE feature for this device too.
2756 */
2757 return MICREL_NO_EEE;
2758 }
2759
2760 return 0;
2761 }
2762
ksz_phylink_mac_link_down(struct phylink_config * config,unsigned int mode,phy_interface_t interface)2763 static void ksz_phylink_mac_link_down(struct phylink_config *config,
2764 unsigned int mode,
2765 phy_interface_t interface)
2766 {
2767 struct dsa_port *dp = dsa_phylink_to_port(config);
2768 struct ksz_device *dev = dp->ds->priv;
2769
2770 /* Read all MIB counters when the link is going down. */
2771 dev->ports[dp->index].read = true;
2772 /* timer started */
2773 if (dev->mib_read_interval)
2774 schedule_delayed_work(&dev->mib_read, 0);
2775 }
2776
ksz_sset_count(struct dsa_switch * ds,int port,int sset)2777 static int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
2778 {
2779 struct ksz_device *dev = ds->priv;
2780
2781 if (sset != ETH_SS_STATS)
2782 return 0;
2783
2784 return dev->info->mib_cnt;
2785 }
2786
ksz_get_ethtool_stats(struct dsa_switch * ds,int port,uint64_t * buf)2787 static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
2788 uint64_t *buf)
2789 {
2790 const struct dsa_port *dp = dsa_to_port(ds, port);
2791 struct ksz_device *dev = ds->priv;
2792 struct ksz_port_mib *mib;
2793
2794 mib = &dev->ports[port].mib;
2795 mutex_lock(&mib->cnt_mutex);
2796
2797 /* Only read dropped counters if no link. */
2798 if (!netif_carrier_ok(dp->user))
2799 mib->cnt_ptr = dev->info->reg_mib_cnt;
2800 port_r_cnt(dev, port);
2801 memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64));
2802 mutex_unlock(&mib->cnt_mutex);
2803 }
2804
ksz_port_bridge_join(struct dsa_switch * ds,int port,struct dsa_bridge bridge,bool * tx_fwd_offload,struct netlink_ext_ack * extack)2805 static int ksz_port_bridge_join(struct dsa_switch *ds, int port,
2806 struct dsa_bridge bridge,
2807 bool *tx_fwd_offload,
2808 struct netlink_ext_ack *extack)
2809 {
2810 /* port_stp_state_set() will be called after to put the port in
2811 * appropriate state so there is no need to do anything.
2812 */
2813
2814 return 0;
2815 }
2816
ksz_port_bridge_leave(struct dsa_switch * ds,int port,struct dsa_bridge bridge)2817 static void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
2818 struct dsa_bridge bridge)
2819 {
2820 /* port_stp_state_set() will be called after to put the port in
2821 * forwarding state so there is no need to do anything.
2822 */
2823 }
2824
ksz_port_fast_age(struct dsa_switch * ds,int port)2825 static void ksz_port_fast_age(struct dsa_switch *ds, int port)
2826 {
2827 struct ksz_device *dev = ds->priv;
2828
2829 dev->dev_ops->flush_dyn_mac_table(dev, port);
2830 }
2831
ksz_set_ageing_time(struct dsa_switch * ds,unsigned int msecs)2832 static int ksz_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
2833 {
2834 struct ksz_device *dev = ds->priv;
2835
2836 if (!dev->dev_ops->set_ageing_time)
2837 return -EOPNOTSUPP;
2838
2839 return dev->dev_ops->set_ageing_time(dev, msecs);
2840 }
2841
ksz_port_fdb_add(struct dsa_switch * ds,int port,const unsigned char * addr,u16 vid,struct dsa_db db)2842 static int ksz_port_fdb_add(struct dsa_switch *ds, int port,
2843 const unsigned char *addr, u16 vid,
2844 struct dsa_db db)
2845 {
2846 struct ksz_device *dev = ds->priv;
2847
2848 if (!dev->dev_ops->fdb_add)
2849 return -EOPNOTSUPP;
2850
2851 return dev->dev_ops->fdb_add(dev, port, addr, vid, db);
2852 }
2853
ksz_port_fdb_del(struct dsa_switch * ds,int port,const unsigned char * addr,u16 vid,struct dsa_db db)2854 static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
2855 const unsigned char *addr,
2856 u16 vid, struct dsa_db db)
2857 {
2858 struct ksz_device *dev = ds->priv;
2859
2860 if (!dev->dev_ops->fdb_del)
2861 return -EOPNOTSUPP;
2862
2863 return dev->dev_ops->fdb_del(dev, port, addr, vid, db);
2864 }
2865
ksz_port_fdb_dump(struct dsa_switch * ds,int port,dsa_fdb_dump_cb_t * cb,void * data)2866 static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
2867 dsa_fdb_dump_cb_t *cb, void *data)
2868 {
2869 struct ksz_device *dev = ds->priv;
2870
2871 if (!dev->dev_ops->fdb_dump)
2872 return -EOPNOTSUPP;
2873
2874 return dev->dev_ops->fdb_dump(dev, port, cb, data);
2875 }
2876
ksz_port_mdb_add(struct dsa_switch * ds,int port,const struct switchdev_obj_port_mdb * mdb,struct dsa_db db)2877 static int ksz_port_mdb_add(struct dsa_switch *ds, int port,
2878 const struct switchdev_obj_port_mdb *mdb,
2879 struct dsa_db db)
2880 {
2881 struct ksz_device *dev = ds->priv;
2882
2883 if (!dev->dev_ops->mdb_add)
2884 return -EOPNOTSUPP;
2885
2886 return dev->dev_ops->mdb_add(dev, port, mdb, db);
2887 }
2888
ksz_port_mdb_del(struct dsa_switch * ds,int port,const struct switchdev_obj_port_mdb * mdb,struct dsa_db db)2889 static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
2890 const struct switchdev_obj_port_mdb *mdb,
2891 struct dsa_db db)
2892 {
2893 struct ksz_device *dev = ds->priv;
2894
2895 if (!dev->dev_ops->mdb_del)
2896 return -EOPNOTSUPP;
2897
2898 return dev->dev_ops->mdb_del(dev, port, mdb, db);
2899 }
2900
ksz9477_set_default_prio_queue_mapping(struct ksz_device * dev,int port)2901 static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev,
2902 int port)
2903 {
2904 u32 queue_map = 0;
2905 int ipm;
2906
2907 for (ipm = 0; ipm < dev->info->num_ipms; ipm++) {
2908 int queue;
2909
2910 /* Traffic Type (TT) is corresponding to the Internal Priority
2911 * Map (IPM) in the switch. Traffic Class (TC) is
2912 * corresponding to the queue in the switch.
2913 */
2914 queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues);
2915 if (queue < 0)
2916 return queue;
2917
2918 queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S);
2919 }
2920
2921 return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
2922 }
2923
ksz_port_setup(struct dsa_switch * ds,int port)2924 static int ksz_port_setup(struct dsa_switch *ds, int port)
2925 {
2926 struct ksz_device *dev = ds->priv;
2927 int ret;
2928
2929 if (!dsa_is_user_port(ds, port))
2930 return 0;
2931
2932 /* setup user port */
2933 dev->dev_ops->port_setup(dev, port, false);
2934
2935 if (!is_ksz8(dev)) {
2936 ret = ksz9477_set_default_prio_queue_mapping(dev, port);
2937 if (ret)
2938 return ret;
2939 }
2940
2941 /* port_stp_state_set() will be called after to enable the port so
2942 * there is no need to do anything.
2943 */
2944
2945 return ksz_dcb_init_port(dev, port);
2946 }
2947
ksz_port_stp_state_set(struct dsa_switch * ds,int port,u8 state)2948 void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
2949 {
2950 struct ksz_device *dev = ds->priv;
2951 struct ksz_port *p;
2952 const u16 *regs;
2953 u8 data;
2954
2955 regs = dev->info->regs;
2956
2957 ksz_pread8(dev, port, regs[P_STP_CTRL], &data);
2958 data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
2959
2960 p = &dev->ports[port];
2961
2962 switch (state) {
2963 case BR_STATE_DISABLED:
2964 data |= PORT_LEARN_DISABLE;
2965 break;
2966 case BR_STATE_LISTENING:
2967 data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
2968 break;
2969 case BR_STATE_LEARNING:
2970 data |= PORT_RX_ENABLE;
2971 if (!p->learning)
2972 data |= PORT_LEARN_DISABLE;
2973 break;
2974 case BR_STATE_FORWARDING:
2975 data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
2976 if (!p->learning)
2977 data |= PORT_LEARN_DISABLE;
2978 break;
2979 case BR_STATE_BLOCKING:
2980 data |= PORT_LEARN_DISABLE;
2981 break;
2982 default:
2983 dev_err(ds->dev, "invalid STP state: %d\n", state);
2984 return;
2985 }
2986
2987 ksz_pwrite8(dev, port, regs[P_STP_CTRL], data);
2988
2989 p->stp_state = state;
2990
2991 ksz_update_port_member(dev, port);
2992 }
2993
ksz_port_teardown(struct dsa_switch * ds,int port)2994 static void ksz_port_teardown(struct dsa_switch *ds, int port)
2995 {
2996 struct ksz_device *dev = ds->priv;
2997
2998 switch (dev->chip_id) {
2999 case KSZ8563_CHIP_ID:
3000 case KSZ8567_CHIP_ID:
3001 case KSZ9477_CHIP_ID:
3002 case KSZ9563_CHIP_ID:
3003 case KSZ9567_CHIP_ID:
3004 case KSZ9893_CHIP_ID:
3005 case KSZ9896_CHIP_ID:
3006 case KSZ9897_CHIP_ID:
3007 if (dsa_is_user_port(ds, port))
3008 ksz9477_port_acl_free(dev, port);
3009 }
3010 }
3011
ksz_port_pre_bridge_flags(struct dsa_switch * ds,int port,struct switchdev_brport_flags flags,struct netlink_ext_ack * extack)3012 static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
3013 struct switchdev_brport_flags flags,
3014 struct netlink_ext_ack *extack)
3015 {
3016 if (flags.mask & ~(BR_LEARNING | BR_ISOLATED))
3017 return -EINVAL;
3018
3019 return 0;
3020 }
3021
ksz_port_bridge_flags(struct dsa_switch * ds,int port,struct switchdev_brport_flags flags,struct netlink_ext_ack * extack)3022 static int ksz_port_bridge_flags(struct dsa_switch *ds, int port,
3023 struct switchdev_brport_flags flags,
3024 struct netlink_ext_ack *extack)
3025 {
3026 struct ksz_device *dev = ds->priv;
3027 struct ksz_port *p = &dev->ports[port];
3028
3029 if (flags.mask & (BR_LEARNING | BR_ISOLATED)) {
3030 if (flags.mask & BR_LEARNING)
3031 p->learning = !!(flags.val & BR_LEARNING);
3032
3033 if (flags.mask & BR_ISOLATED)
3034 p->isolated = !!(flags.val & BR_ISOLATED);
3035
3036 /* Make the change take effect immediately */
3037 ksz_port_stp_state_set(ds, port, p->stp_state);
3038 }
3039
3040 return 0;
3041 }
3042
ksz_get_tag_protocol(struct dsa_switch * ds,int port,enum dsa_tag_protocol mp)3043 static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
3044 int port,
3045 enum dsa_tag_protocol mp)
3046 {
3047 struct ksz_device *dev = ds->priv;
3048 enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE;
3049
3050 if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev))
3051 proto = DSA_TAG_PROTO_KSZ8795;
3052
3053 if (dev->chip_id == KSZ88X3_CHIP_ID ||
3054 dev->chip_id == KSZ8563_CHIP_ID ||
3055 dev->chip_id == KSZ9893_CHIP_ID ||
3056 dev->chip_id == KSZ9563_CHIP_ID)
3057 proto = DSA_TAG_PROTO_KSZ9893;
3058
3059 if (dev->chip_id == KSZ8567_CHIP_ID ||
3060 dev->chip_id == KSZ9477_CHIP_ID ||
3061 dev->chip_id == KSZ9896_CHIP_ID ||
3062 dev->chip_id == KSZ9897_CHIP_ID ||
3063 dev->chip_id == KSZ9567_CHIP_ID)
3064 proto = DSA_TAG_PROTO_KSZ9477;
3065
3066 if (is_lan937x(dev))
3067 proto = DSA_TAG_PROTO_LAN937X;
3068
3069 return proto;
3070 }
3071
ksz_connect_tag_protocol(struct dsa_switch * ds,enum dsa_tag_protocol proto)3072 static int ksz_connect_tag_protocol(struct dsa_switch *ds,
3073 enum dsa_tag_protocol proto)
3074 {
3075 struct ksz_tagger_data *tagger_data;
3076
3077 switch (proto) {
3078 case DSA_TAG_PROTO_KSZ8795:
3079 return 0;
3080 case DSA_TAG_PROTO_KSZ9893:
3081 case DSA_TAG_PROTO_KSZ9477:
3082 case DSA_TAG_PROTO_LAN937X:
3083 tagger_data = ksz_tagger_data(ds);
3084 tagger_data->xmit_work_fn = ksz_port_deferred_xmit;
3085 return 0;
3086 default:
3087 return -EPROTONOSUPPORT;
3088 }
3089 }
3090
ksz_port_vlan_filtering(struct dsa_switch * ds,int port,bool flag,struct netlink_ext_ack * extack)3091 static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port,
3092 bool flag, struct netlink_ext_ack *extack)
3093 {
3094 struct ksz_device *dev = ds->priv;
3095
3096 if (!dev->dev_ops->vlan_filtering)
3097 return -EOPNOTSUPP;
3098
3099 return dev->dev_ops->vlan_filtering(dev, port, flag, extack);
3100 }
3101
ksz_port_vlan_add(struct dsa_switch * ds,int port,const struct switchdev_obj_port_vlan * vlan,struct netlink_ext_ack * extack)3102 static int ksz_port_vlan_add(struct dsa_switch *ds, int port,
3103 const struct switchdev_obj_port_vlan *vlan,
3104 struct netlink_ext_ack *extack)
3105 {
3106 struct ksz_device *dev = ds->priv;
3107
3108 if (!dev->dev_ops->vlan_add)
3109 return -EOPNOTSUPP;
3110
3111 return dev->dev_ops->vlan_add(dev, port, vlan, extack);
3112 }
3113
ksz_port_vlan_del(struct dsa_switch * ds,int port,const struct switchdev_obj_port_vlan * vlan)3114 static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
3115 const struct switchdev_obj_port_vlan *vlan)
3116 {
3117 struct ksz_device *dev = ds->priv;
3118
3119 if (!dev->dev_ops->vlan_del)
3120 return -EOPNOTSUPP;
3121
3122 return dev->dev_ops->vlan_del(dev, port, vlan);
3123 }
3124
ksz_port_mirror_add(struct dsa_switch * ds,int port,struct dsa_mall_mirror_tc_entry * mirror,bool ingress,struct netlink_ext_ack * extack)3125 static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
3126 struct dsa_mall_mirror_tc_entry *mirror,
3127 bool ingress, struct netlink_ext_ack *extack)
3128 {
3129 struct ksz_device *dev = ds->priv;
3130
3131 if (!dev->dev_ops->mirror_add)
3132 return -EOPNOTSUPP;
3133
3134 return dev->dev_ops->mirror_add(dev, port, mirror, ingress, extack);
3135 }
3136
ksz_port_mirror_del(struct dsa_switch * ds,int port,struct dsa_mall_mirror_tc_entry * mirror)3137 static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
3138 struct dsa_mall_mirror_tc_entry *mirror)
3139 {
3140 struct ksz_device *dev = ds->priv;
3141
3142 if (dev->dev_ops->mirror_del)
3143 dev->dev_ops->mirror_del(dev, port, mirror);
3144 }
3145
ksz_change_mtu(struct dsa_switch * ds,int port,int mtu)3146 static int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
3147 {
3148 struct ksz_device *dev = ds->priv;
3149
3150 if (!dev->dev_ops->change_mtu)
3151 return -EOPNOTSUPP;
3152
3153 return dev->dev_ops->change_mtu(dev, port, mtu);
3154 }
3155
ksz_max_mtu(struct dsa_switch * ds,int port)3156 static int ksz_max_mtu(struct dsa_switch *ds, int port)
3157 {
3158 struct ksz_device *dev = ds->priv;
3159
3160 switch (dev->chip_id) {
3161 case KSZ8795_CHIP_ID:
3162 case KSZ8794_CHIP_ID:
3163 case KSZ8765_CHIP_ID:
3164 return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
3165 case KSZ88X3_CHIP_ID:
3166 case KSZ8864_CHIP_ID:
3167 case KSZ8895_CHIP_ID:
3168 return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
3169 case KSZ8563_CHIP_ID:
3170 case KSZ8567_CHIP_ID:
3171 case KSZ9477_CHIP_ID:
3172 case KSZ9563_CHIP_ID:
3173 case KSZ9567_CHIP_ID:
3174 case KSZ9893_CHIP_ID:
3175 case KSZ9896_CHIP_ID:
3176 case KSZ9897_CHIP_ID:
3177 case LAN9370_CHIP_ID:
3178 case LAN9371_CHIP_ID:
3179 case LAN9372_CHIP_ID:
3180 case LAN9373_CHIP_ID:
3181 case LAN9374_CHIP_ID:
3182 return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
3183 }
3184
3185 return -EOPNOTSUPP;
3186 }
3187
ksz_validate_eee(struct dsa_switch * ds,int port)3188 static int ksz_validate_eee(struct dsa_switch *ds, int port)
3189 {
3190 struct ksz_device *dev = ds->priv;
3191
3192 if (!dev->info->internal_phy[port])
3193 return -EOPNOTSUPP;
3194
3195 switch (dev->chip_id) {
3196 case KSZ8563_CHIP_ID:
3197 case KSZ8567_CHIP_ID:
3198 case KSZ9477_CHIP_ID:
3199 case KSZ9563_CHIP_ID:
3200 case KSZ9567_CHIP_ID:
3201 case KSZ9893_CHIP_ID:
3202 case KSZ9896_CHIP_ID:
3203 case KSZ9897_CHIP_ID:
3204 return 0;
3205 }
3206
3207 return -EOPNOTSUPP;
3208 }
3209
ksz_get_mac_eee(struct dsa_switch * ds,int port,struct ethtool_keee * e)3210 static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
3211 struct ethtool_keee *e)
3212 {
3213 int ret;
3214
3215 ret = ksz_validate_eee(ds, port);
3216 if (ret)
3217 return ret;
3218
3219 /* There is no documented control of Tx LPI configuration. */
3220 e->tx_lpi_enabled = true;
3221
3222 /* There is no documented control of Tx LPI timer. According to tests
3223 * Tx LPI timer seems to be set by default to minimal value.
3224 */
3225 e->tx_lpi_timer = 0;
3226
3227 return 0;
3228 }
3229
ksz_set_mac_eee(struct dsa_switch * ds,int port,struct ethtool_keee * e)3230 static int ksz_set_mac_eee(struct dsa_switch *ds, int port,
3231 struct ethtool_keee *e)
3232 {
3233 struct ksz_device *dev = ds->priv;
3234 int ret;
3235
3236 ret = ksz_validate_eee(ds, port);
3237 if (ret)
3238 return ret;
3239
3240 if (!e->tx_lpi_enabled) {
3241 dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n");
3242 return -EINVAL;
3243 }
3244
3245 if (e->tx_lpi_timer) {
3246 dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n");
3247 return -EINVAL;
3248 }
3249
3250 return 0;
3251 }
3252
ksz_set_xmii(struct ksz_device * dev,int port,phy_interface_t interface)3253 static void ksz_set_xmii(struct ksz_device *dev, int port,
3254 phy_interface_t interface)
3255 {
3256 const u8 *bitval = dev->info->xmii_ctrl1;
3257 struct ksz_port *p = &dev->ports[port];
3258 const u16 *regs = dev->info->regs;
3259 u8 data8;
3260
3261 ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
3262
3263 data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE |
3264 P_RGMII_ID_EG_ENABLE);
3265
3266 switch (interface) {
3267 case PHY_INTERFACE_MODE_MII:
3268 data8 |= bitval[P_MII_SEL];
3269 break;
3270 case PHY_INTERFACE_MODE_RMII:
3271 data8 |= bitval[P_RMII_SEL];
3272 break;
3273 case PHY_INTERFACE_MODE_GMII:
3274 data8 |= bitval[P_GMII_SEL];
3275 break;
3276 case PHY_INTERFACE_MODE_RGMII:
3277 case PHY_INTERFACE_MODE_RGMII_ID:
3278 case PHY_INTERFACE_MODE_RGMII_TXID:
3279 case PHY_INTERFACE_MODE_RGMII_RXID:
3280 data8 |= bitval[P_RGMII_SEL];
3281 /* On KSZ9893, disable RGMII in-band status support */
3282 if (dev->chip_id == KSZ9893_CHIP_ID ||
3283 dev->chip_id == KSZ8563_CHIP_ID ||
3284 dev->chip_id == KSZ9563_CHIP_ID ||
3285 is_lan937x(dev))
3286 data8 &= ~P_MII_MAC_MODE;
3287 break;
3288 default:
3289 dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
3290 phy_modes(interface), port);
3291 return;
3292 }
3293
3294 if (p->rgmii_tx_val)
3295 data8 |= P_RGMII_ID_EG_ENABLE;
3296
3297 if (p->rgmii_rx_val)
3298 data8 |= P_RGMII_ID_IG_ENABLE;
3299
3300 /* Write the updated value */
3301 ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
3302 }
3303
ksz_get_xmii(struct ksz_device * dev,int port,bool gbit)3304 phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
3305 {
3306 const u8 *bitval = dev->info->xmii_ctrl1;
3307 const u16 *regs = dev->info->regs;
3308 phy_interface_t interface;
3309 u8 data8;
3310 u8 val;
3311
3312 ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
3313
3314 val = FIELD_GET(P_MII_SEL_M, data8);
3315
3316 if (val == bitval[P_MII_SEL]) {
3317 if (gbit)
3318 interface = PHY_INTERFACE_MODE_GMII;
3319 else
3320 interface = PHY_INTERFACE_MODE_MII;
3321 } else if (val == bitval[P_RMII_SEL]) {
3322 interface = PHY_INTERFACE_MODE_RMII;
3323 } else {
3324 interface = PHY_INTERFACE_MODE_RGMII;
3325 if (data8 & P_RGMII_ID_EG_ENABLE)
3326 interface = PHY_INTERFACE_MODE_RGMII_TXID;
3327 if (data8 & P_RGMII_ID_IG_ENABLE) {
3328 interface = PHY_INTERFACE_MODE_RGMII_RXID;
3329 if (data8 & P_RGMII_ID_EG_ENABLE)
3330 interface = PHY_INTERFACE_MODE_RGMII_ID;
3331 }
3332 }
3333
3334 return interface;
3335 }
3336
ksz88x3_phylink_mac_config(struct phylink_config * config,unsigned int mode,const struct phylink_link_state * state)3337 static void ksz88x3_phylink_mac_config(struct phylink_config *config,
3338 unsigned int mode,
3339 const struct phylink_link_state *state)
3340 {
3341 struct dsa_port *dp = dsa_phylink_to_port(config);
3342 struct ksz_device *dev = dp->ds->priv;
3343
3344 dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN);
3345 }
3346
ksz_phylink_mac_config(struct phylink_config * config,unsigned int mode,const struct phylink_link_state * state)3347 static void ksz_phylink_mac_config(struct phylink_config *config,
3348 unsigned int mode,
3349 const struct phylink_link_state *state)
3350 {
3351 struct dsa_port *dp = dsa_phylink_to_port(config);
3352 struct ksz_device *dev = dp->ds->priv;
3353 int port = dp->index;
3354
3355 /* Internal PHYs */
3356 if (dev->info->internal_phy[port])
3357 return;
3358
3359 if (phylink_autoneg_inband(mode)) {
3360 dev_err(dev->dev, "In-band AN not supported!\n");
3361 return;
3362 }
3363
3364 ksz_set_xmii(dev, port, state->interface);
3365
3366 if (dev->dev_ops->setup_rgmii_delay)
3367 dev->dev_ops->setup_rgmii_delay(dev, port);
3368 }
3369
ksz_get_gbit(struct ksz_device * dev,int port)3370 bool ksz_get_gbit(struct ksz_device *dev, int port)
3371 {
3372 const u8 *bitval = dev->info->xmii_ctrl1;
3373 const u16 *regs = dev->info->regs;
3374 bool gbit = false;
3375 u8 data8;
3376 bool val;
3377
3378 ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
3379
3380 val = FIELD_GET(P_GMII_1GBIT_M, data8);
3381
3382 if (val == bitval[P_GMII_1GBIT])
3383 gbit = true;
3384
3385 return gbit;
3386 }
3387
ksz_set_gbit(struct ksz_device * dev,int port,bool gbit)3388 static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
3389 {
3390 const u8 *bitval = dev->info->xmii_ctrl1;
3391 const u16 *regs = dev->info->regs;
3392 u8 data8;
3393
3394 ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
3395
3396 data8 &= ~P_GMII_1GBIT_M;
3397
3398 if (gbit)
3399 data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_1GBIT]);
3400 else
3401 data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_NOT_1GBIT]);
3402
3403 /* Write the updated value */
3404 ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
3405 }
3406
ksz_set_100_10mbit(struct ksz_device * dev,int port,int speed)3407 static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
3408 {
3409 const u8 *bitval = dev->info->xmii_ctrl0;
3410 const u16 *regs = dev->info->regs;
3411 u8 data8;
3412
3413 ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8);
3414
3415 data8 &= ~P_MII_100MBIT_M;
3416
3417 if (speed == SPEED_100)
3418 data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]);
3419 else
3420 data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]);
3421
3422 /* Write the updated value */
3423 ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
3424 }
3425
ksz_port_set_xmii_speed(struct ksz_device * dev,int port,int speed)3426 static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
3427 {
3428 if (speed == SPEED_1000)
3429 ksz_set_gbit(dev, port, true);
3430 else
3431 ksz_set_gbit(dev, port, false);
3432
3433 if (speed == SPEED_100 || speed == SPEED_10)
3434 ksz_set_100_10mbit(dev, port, speed);
3435 }
3436
ksz_duplex_flowctrl(struct ksz_device * dev,int port,int duplex,bool tx_pause,bool rx_pause)3437 static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
3438 bool tx_pause, bool rx_pause)
3439 {
3440 const u8 *bitval = dev->info->xmii_ctrl0;
3441 const u32 *masks = dev->info->masks;
3442 const u16 *regs = dev->info->regs;
3443 u8 mask;
3444 u8 val;
3445
3446 mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] |
3447 masks[P_MII_RX_FLOW_CTRL];
3448
3449 if (duplex == DUPLEX_FULL)
3450 val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]);
3451 else
3452 val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]);
3453
3454 if (tx_pause)
3455 val |= masks[P_MII_TX_FLOW_CTRL];
3456
3457 if (rx_pause)
3458 val |= masks[P_MII_RX_FLOW_CTRL];
3459
3460 ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
3461 }
3462
ksz9477_phylink_mac_link_up(struct phylink_config * config,struct phy_device * phydev,unsigned int mode,phy_interface_t interface,int speed,int duplex,bool tx_pause,bool rx_pause)3463 static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
3464 struct phy_device *phydev,
3465 unsigned int mode,
3466 phy_interface_t interface,
3467 int speed, int duplex, bool tx_pause,
3468 bool rx_pause)
3469 {
3470 struct dsa_port *dp = dsa_phylink_to_port(config);
3471 struct ksz_device *dev = dp->ds->priv;
3472 int port = dp->index;
3473 struct ksz_port *p;
3474
3475 p = &dev->ports[port];
3476
3477 /* Internal PHYs */
3478 if (dev->info->internal_phy[port])
3479 return;
3480
3481 p->phydev.speed = speed;
3482
3483 ksz_port_set_xmii_speed(dev, port, speed);
3484
3485 ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
3486 }
3487
ksz_switch_detect(struct ksz_device * dev)3488 static int ksz_switch_detect(struct ksz_device *dev)
3489 {
3490 u8 id1, id2, id4;
3491 u16 id16;
3492 u32 id32;
3493 int ret;
3494
3495 /* read chip id */
3496 ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
3497 if (ret)
3498 return ret;
3499
3500 id1 = FIELD_GET(SW_FAMILY_ID_M, id16);
3501 id2 = FIELD_GET(SW_CHIP_ID_M, id16);
3502
3503 switch (id1) {
3504 case KSZ87_FAMILY_ID:
3505 if (id2 == KSZ87_CHIP_ID_95) {
3506 u8 val;
3507
3508 dev->chip_id = KSZ8795_CHIP_ID;
3509
3510 ksz_read8(dev, KSZ8_PORT_STATUS_0, &val);
3511 if (val & KSZ8_PORT_FIBER_MODE)
3512 dev->chip_id = KSZ8765_CHIP_ID;
3513 } else if (id2 == KSZ87_CHIP_ID_94) {
3514 dev->chip_id = KSZ8794_CHIP_ID;
3515 } else {
3516 return -ENODEV;
3517 }
3518 break;
3519 case KSZ88_FAMILY_ID:
3520 if (id2 == KSZ88_CHIP_ID_63)
3521 dev->chip_id = KSZ88X3_CHIP_ID;
3522 else
3523 return -ENODEV;
3524 break;
3525 case KSZ8895_FAMILY_ID:
3526 if (id2 == KSZ8895_CHIP_ID_95 ||
3527 id2 == KSZ8895_CHIP_ID_95R)
3528 dev->chip_id = KSZ8895_CHIP_ID;
3529 else
3530 return -ENODEV;
3531 ret = ksz_read8(dev, REG_KSZ8864_CHIP_ID, &id4);
3532 if (ret)
3533 return ret;
3534 if (id4 & SW_KSZ8864)
3535 dev->chip_id = KSZ8864_CHIP_ID;
3536 break;
3537 default:
3538 ret = ksz_read32(dev, REG_CHIP_ID0, &id32);
3539 if (ret)
3540 return ret;
3541
3542 dev->chip_rev = FIELD_GET(SW_REV_ID_M, id32);
3543 id32 &= ~0xFF;
3544
3545 switch (id32) {
3546 case KSZ9477_CHIP_ID:
3547 case KSZ9896_CHIP_ID:
3548 case KSZ9897_CHIP_ID:
3549 case KSZ9567_CHIP_ID:
3550 case KSZ8567_CHIP_ID:
3551 case LAN9370_CHIP_ID:
3552 case LAN9371_CHIP_ID:
3553 case LAN9372_CHIP_ID:
3554 case LAN9373_CHIP_ID:
3555 case LAN9374_CHIP_ID:
3556 dev->chip_id = id32;
3557 break;
3558 case KSZ9893_CHIP_ID:
3559 ret = ksz_read8(dev, REG_CHIP_ID4,
3560 &id4);
3561 if (ret)
3562 return ret;
3563
3564 if (id4 == SKU_ID_KSZ8563)
3565 dev->chip_id = KSZ8563_CHIP_ID;
3566 else if (id4 == SKU_ID_KSZ9563)
3567 dev->chip_id = KSZ9563_CHIP_ID;
3568 else
3569 dev->chip_id = KSZ9893_CHIP_ID;
3570
3571 break;
3572 default:
3573 dev_err(dev->dev,
3574 "unsupported switch detected %x)\n", id32);
3575 return -ENODEV;
3576 }
3577 }
3578 return 0;
3579 }
3580
ksz_cls_flower_add(struct dsa_switch * ds,int port,struct flow_cls_offload * cls,bool ingress)3581 static int ksz_cls_flower_add(struct dsa_switch *ds, int port,
3582 struct flow_cls_offload *cls, bool ingress)
3583 {
3584 struct ksz_device *dev = ds->priv;
3585
3586 switch (dev->chip_id) {
3587 case KSZ8563_CHIP_ID:
3588 case KSZ8567_CHIP_ID:
3589 case KSZ9477_CHIP_ID:
3590 case KSZ9563_CHIP_ID:
3591 case KSZ9567_CHIP_ID:
3592 case KSZ9893_CHIP_ID:
3593 case KSZ9896_CHIP_ID:
3594 case KSZ9897_CHIP_ID:
3595 return ksz9477_cls_flower_add(ds, port, cls, ingress);
3596 }
3597
3598 return -EOPNOTSUPP;
3599 }
3600
ksz_cls_flower_del(struct dsa_switch * ds,int port,struct flow_cls_offload * cls,bool ingress)3601 static int ksz_cls_flower_del(struct dsa_switch *ds, int port,
3602 struct flow_cls_offload *cls, bool ingress)
3603 {
3604 struct ksz_device *dev = ds->priv;
3605
3606 switch (dev->chip_id) {
3607 case KSZ8563_CHIP_ID:
3608 case KSZ8567_CHIP_ID:
3609 case KSZ9477_CHIP_ID:
3610 case KSZ9563_CHIP_ID:
3611 case KSZ9567_CHIP_ID:
3612 case KSZ9893_CHIP_ID:
3613 case KSZ9896_CHIP_ID:
3614 case KSZ9897_CHIP_ID:
3615 return ksz9477_cls_flower_del(ds, port, cls, ingress);
3616 }
3617
3618 return -EOPNOTSUPP;
3619 }
3620
3621 /* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth
3622 * is converted to Hex-decimal using the successive multiplication method. On
3623 * every step, integer part is taken and decimal part is carry forwarded.
3624 */
cinc_cal(s32 idle_slope,s32 send_slope,u32 * bw)3625 static int cinc_cal(s32 idle_slope, s32 send_slope, u32 *bw)
3626 {
3627 u32 cinc = 0;
3628 u32 txrate;
3629 u32 rate;
3630 u8 temp;
3631 u8 i;
3632
3633 txrate = idle_slope - send_slope;
3634
3635 if (!txrate)
3636 return -EINVAL;
3637
3638 rate = idle_slope;
3639
3640 /* 24 bit register */
3641 for (i = 0; i < 6; i++) {
3642 rate = rate * 16;
3643
3644 temp = rate / txrate;
3645
3646 rate %= txrate;
3647
3648 cinc = ((cinc << 4) | temp);
3649 }
3650
3651 *bw = cinc;
3652
3653 return 0;
3654 }
3655
ksz_setup_tc_mode(struct ksz_device * dev,int port,u8 scheduler,u8 shaper)3656 static int ksz_setup_tc_mode(struct ksz_device *dev, int port, u8 scheduler,
3657 u8 shaper)
3658 {
3659 return ksz_pwrite8(dev, port, REG_PORT_MTI_QUEUE_CTRL_0,
3660 FIELD_PREP(MTI_SCHEDULE_MODE_M, scheduler) |
3661 FIELD_PREP(MTI_SHAPING_M, shaper));
3662 }
3663
ksz_setup_tc_cbs(struct dsa_switch * ds,int port,struct tc_cbs_qopt_offload * qopt)3664 static int ksz_setup_tc_cbs(struct dsa_switch *ds, int port,
3665 struct tc_cbs_qopt_offload *qopt)
3666 {
3667 struct ksz_device *dev = ds->priv;
3668 int ret;
3669 u32 bw;
3670
3671 if (!dev->info->tc_cbs_supported)
3672 return -EOPNOTSUPP;
3673
3674 if (qopt->queue > dev->info->num_tx_queues)
3675 return -EINVAL;
3676
3677 /* Queue Selection */
3678 ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, qopt->queue);
3679 if (ret)
3680 return ret;
3681
3682 if (!qopt->enable)
3683 return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR,
3684 MTI_SHAPING_OFF);
3685
3686 /* High Credit */
3687 ret = ksz_pwrite16(dev, port, REG_PORT_MTI_HI_WATER_MARK,
3688 qopt->hicredit);
3689 if (ret)
3690 return ret;
3691
3692 /* Low Credit */
3693 ret = ksz_pwrite16(dev, port, REG_PORT_MTI_LO_WATER_MARK,
3694 qopt->locredit);
3695 if (ret)
3696 return ret;
3697
3698 /* Credit Increment Register */
3699 ret = cinc_cal(qopt->idleslope, qopt->sendslope, &bw);
3700 if (ret)
3701 return ret;
3702
3703 if (dev->dev_ops->tc_cbs_set_cinc) {
3704 ret = dev->dev_ops->tc_cbs_set_cinc(dev, port, bw);
3705 if (ret)
3706 return ret;
3707 }
3708
3709 return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO,
3710 MTI_SHAPING_SRP);
3711 }
3712
ksz_disable_egress_rate_limit(struct ksz_device * dev,int port)3713 static int ksz_disable_egress_rate_limit(struct ksz_device *dev, int port)
3714 {
3715 int queue, ret;
3716
3717 /* Configuration will not take effect until the last Port Queue X
3718 * Egress Limit Control Register is written.
3719 */
3720 for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
3721 ret = ksz_pwrite8(dev, port, KSZ9477_REG_PORT_OUT_RATE_0 + queue,
3722 KSZ9477_OUT_RATE_NO_LIMIT);
3723 if (ret)
3724 return ret;
3725 }
3726
3727 return 0;
3728 }
3729
ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params * p,int band)3730 static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p,
3731 int band)
3732 {
3733 /* Compared to queues, bands prioritize packets differently. In strict
3734 * priority mode, the lowest priority is assigned to Queue 0 while the
3735 * highest priority is given to Band 0.
3736 */
3737 return p->bands - 1 - band;
3738 }
3739
ksz_queue_set_strict(struct ksz_device * dev,int port,int queue)3740 static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue)
3741 {
3742 int ret;
3743
3744 ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue);
3745 if (ret)
3746 return ret;
3747
3748 return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO,
3749 MTI_SHAPING_OFF);
3750 }
3751
ksz_queue_set_wrr(struct ksz_device * dev,int port,int queue,int weight)3752 static int ksz_queue_set_wrr(struct ksz_device *dev, int port, int queue,
3753 int weight)
3754 {
3755 int ret;
3756
3757 ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue);
3758 if (ret)
3759 return ret;
3760
3761 ret = ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR,
3762 MTI_SHAPING_OFF);
3763 if (ret)
3764 return ret;
3765
3766 return ksz_pwrite8(dev, port, KSZ9477_PORT_MTI_QUEUE_CTRL_1, weight);
3767 }
3768
ksz_tc_ets_add(struct ksz_device * dev,int port,struct tc_ets_qopt_offload_replace_params * p)3769 static int ksz_tc_ets_add(struct ksz_device *dev, int port,
3770 struct tc_ets_qopt_offload_replace_params *p)
3771 {
3772 int ret, band, tc_prio;
3773 u32 queue_map = 0;
3774
3775 /* In order to ensure proper prioritization, it is necessary to set the
3776 * rate limit for the related queue to zero. Otherwise strict priority
3777 * or WRR mode will not work. This is a hardware limitation.
3778 */
3779 ret = ksz_disable_egress_rate_limit(dev, port);
3780 if (ret)
3781 return ret;
3782
3783 /* Configure queue scheduling mode for all bands. Currently only strict
3784 * prio mode is supported.
3785 */
3786 for (band = 0; band < p->bands; band++) {
3787 int queue = ksz_ets_band_to_queue(p, band);
3788
3789 ret = ksz_queue_set_strict(dev, port, queue);
3790 if (ret)
3791 return ret;
3792 }
3793
3794 /* Configure the mapping between traffic classes and queues. Note:
3795 * priomap variable support 16 traffic classes, but the chip can handle
3796 * only 8 classes.
3797 */
3798 for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) {
3799 int queue;
3800
3801 if (tc_prio >= dev->info->num_ipms)
3802 break;
3803
3804 queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]);
3805 queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
3806 }
3807
3808 return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
3809 }
3810
ksz_tc_ets_del(struct ksz_device * dev,int port)3811 static int ksz_tc_ets_del(struct ksz_device *dev, int port)
3812 {
3813 int ret, queue;
3814
3815 /* To restore the default chip configuration, set all queues to use the
3816 * WRR scheduler with a weight of 1.
3817 */
3818 for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
3819 ret = ksz_queue_set_wrr(dev, port, queue,
3820 KSZ9477_DEFAULT_WRR_WEIGHT);
3821 if (ret)
3822 return ret;
3823 }
3824
3825 /* Revert the queue mapping for TC-priority to its default setting on
3826 * the chip.
3827 */
3828 return ksz9477_set_default_prio_queue_mapping(dev, port);
3829 }
3830
ksz_tc_ets_validate(struct ksz_device * dev,int port,struct tc_ets_qopt_offload_replace_params * p)3831 static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
3832 struct tc_ets_qopt_offload_replace_params *p)
3833 {
3834 int band;
3835
3836 /* Since it is not feasible to share one port among multiple qdisc,
3837 * the user must configure all available queues appropriately.
3838 */
3839 if (p->bands != dev->info->num_tx_queues) {
3840 dev_err(dev->dev, "Not supported amount of bands. It should be %d\n",
3841 dev->info->num_tx_queues);
3842 return -EOPNOTSUPP;
3843 }
3844
3845 for (band = 0; band < p->bands; ++band) {
3846 /* The KSZ switches utilize a weighted round robin configuration
3847 * where a certain number of packets can be transmitted from a
3848 * queue before the next queue is serviced. For more information
3849 * on this, refer to section 5.2.8.4 of the KSZ8565R
3850 * documentation on the Port Transmit Queue Control 1 Register.
3851 * However, the current ETS Qdisc implementation (as of February
3852 * 2023) assigns a weight to each queue based on the number of
3853 * bytes or extrapolated bandwidth in percentages. Since this
3854 * differs from the KSZ switches' method and we don't want to
3855 * fake support by converting bytes to packets, it is better to
3856 * return an error instead.
3857 */
3858 if (p->quanta[band]) {
3859 dev_err(dev->dev, "Quanta/weights configuration is not supported.\n");
3860 return -EOPNOTSUPP;
3861 }
3862 }
3863
3864 return 0;
3865 }
3866
ksz_tc_setup_qdisc_ets(struct dsa_switch * ds,int port,struct tc_ets_qopt_offload * qopt)3867 static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
3868 struct tc_ets_qopt_offload *qopt)
3869 {
3870 struct ksz_device *dev = ds->priv;
3871 int ret;
3872
3873 if (is_ksz8(dev))
3874 return -EOPNOTSUPP;
3875
3876 if (qopt->parent != TC_H_ROOT) {
3877 dev_err(dev->dev, "Parent should be \"root\"\n");
3878 return -EOPNOTSUPP;
3879 }
3880
3881 switch (qopt->command) {
3882 case TC_ETS_REPLACE:
3883 ret = ksz_tc_ets_validate(dev, port, &qopt->replace_params);
3884 if (ret)
3885 return ret;
3886
3887 return ksz_tc_ets_add(dev, port, &qopt->replace_params);
3888 case TC_ETS_DESTROY:
3889 return ksz_tc_ets_del(dev, port);
3890 case TC_ETS_STATS:
3891 case TC_ETS_GRAFT:
3892 return -EOPNOTSUPP;
3893 }
3894
3895 return -EOPNOTSUPP;
3896 }
3897
ksz_setup_tc(struct dsa_switch * ds,int port,enum tc_setup_type type,void * type_data)3898 static int ksz_setup_tc(struct dsa_switch *ds, int port,
3899 enum tc_setup_type type, void *type_data)
3900 {
3901 switch (type) {
3902 case TC_SETUP_QDISC_CBS:
3903 return ksz_setup_tc_cbs(ds, port, type_data);
3904 case TC_SETUP_QDISC_ETS:
3905 return ksz_tc_setup_qdisc_ets(ds, port, type_data);
3906 default:
3907 return -EOPNOTSUPP;
3908 }
3909 }
3910
3911 /**
3912 * ksz_handle_wake_reason - Handle wake reason on a specified port.
3913 * @dev: The device structure.
3914 * @port: The port number.
3915 *
3916 * This function reads the PME (Power Management Event) status register of a
3917 * specified port to determine the wake reason. If there is no wake event, it
3918 * returns early. Otherwise, it logs the wake reason which could be due to a
3919 * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register
3920 * is then cleared to acknowledge the handling of the wake event.
3921 *
3922 * Return: 0 on success, or an error code on failure.
3923 */
ksz_handle_wake_reason(struct ksz_device * dev,int port)3924 int ksz_handle_wake_reason(struct ksz_device *dev, int port)
3925 {
3926 const struct ksz_dev_ops *ops = dev->dev_ops;
3927 const u16 *regs = dev->info->regs;
3928 u8 pme_status;
3929 int ret;
3930
3931 ret = ops->pme_pread8(dev, port, regs[REG_PORT_PME_STATUS],
3932 &pme_status);
3933 if (ret)
3934 return ret;
3935
3936 if (!pme_status)
3937 return 0;
3938
3939 dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port,
3940 pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "",
3941 pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "",
3942 pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : "");
3943
3944 return ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_STATUS],
3945 pme_status);
3946 }
3947
3948 /**
3949 * ksz_get_wol - Get Wake-on-LAN settings for a specified port.
3950 * @ds: The dsa_switch structure.
3951 * @port: The port number.
3952 * @wol: Pointer to ethtool Wake-on-LAN settings structure.
3953 *
3954 * This function checks the device PME wakeup_source flag and chip_id.
3955 * If enabled and supported, it sets the supported and active WoL
3956 * flags.
3957 */
ksz_get_wol(struct dsa_switch * ds,int port,struct ethtool_wolinfo * wol)3958 static void ksz_get_wol(struct dsa_switch *ds, int port,
3959 struct ethtool_wolinfo *wol)
3960 {
3961 struct ksz_device *dev = ds->priv;
3962 const u16 *regs = dev->info->regs;
3963 u8 pme_ctrl;
3964 int ret;
3965
3966 if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev))
3967 return;
3968
3969 if (!dev->wakeup_source)
3970 return;
3971
3972 wol->supported = WAKE_PHY;
3973
3974 /* Check if the current MAC address on this port can be set
3975 * as global for WAKE_MAGIC support. The result may vary
3976 * dynamically based on other ports configurations.
3977 */
3978 if (ksz_is_port_mac_global_usable(dev->ds, port))
3979 wol->supported |= WAKE_MAGIC;
3980
3981 ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL],
3982 &pme_ctrl);
3983 if (ret)
3984 return;
3985
3986 if (pme_ctrl & PME_WOL_MAGICPKT)
3987 wol->wolopts |= WAKE_MAGIC;
3988 if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY))
3989 wol->wolopts |= WAKE_PHY;
3990 }
3991
3992 /**
3993 * ksz_set_wol - Set Wake-on-LAN settings for a specified port.
3994 * @ds: The dsa_switch structure.
3995 * @port: The port number.
3996 * @wol: Pointer to ethtool Wake-on-LAN settings structure.
3997 *
3998 * This function configures Wake-on-LAN (WoL) settings for a specified
3999 * port. It validates the provided WoL options, checks if PME is
4000 * enabled and supported, clears any previous wake reasons, and sets
4001 * the Magic Packet flag in the port's PME control register if
4002 * specified.
4003 *
4004 * Return: 0 on success, or other error codes on failure.
4005 */
ksz_set_wol(struct dsa_switch * ds,int port,struct ethtool_wolinfo * wol)4006 static int ksz_set_wol(struct dsa_switch *ds, int port,
4007 struct ethtool_wolinfo *wol)
4008 {
4009 u8 pme_ctrl = 0, pme_ctrl_old = 0;
4010 struct ksz_device *dev = ds->priv;
4011 const u16 *regs = dev->info->regs;
4012 bool magic_switched_off;
4013 bool magic_switched_on;
4014 int ret;
4015
4016 if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
4017 return -EINVAL;
4018
4019 if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev))
4020 return -EOPNOTSUPP;
4021
4022 if (!dev->wakeup_source)
4023 return -EOPNOTSUPP;
4024
4025 ret = ksz_handle_wake_reason(dev, port);
4026 if (ret)
4027 return ret;
4028
4029 if (wol->wolopts & WAKE_MAGIC)
4030 pme_ctrl |= PME_WOL_MAGICPKT;
4031 if (wol->wolopts & WAKE_PHY)
4032 pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY;
4033
4034 ret = dev->dev_ops->pme_pread8(dev, port, regs[REG_PORT_PME_CTRL],
4035 &pme_ctrl_old);
4036 if (ret)
4037 return ret;
4038
4039 if (pme_ctrl_old == pme_ctrl)
4040 return 0;
4041
4042 magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) &&
4043 !(pme_ctrl & PME_WOL_MAGICPKT);
4044 magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) &&
4045 (pme_ctrl & PME_WOL_MAGICPKT);
4046
4047 /* To keep reference count of MAC address, we should do this
4048 * operation only on change of WOL settings.
4049 */
4050 if (magic_switched_on) {
4051 ret = ksz_switch_macaddr_get(dev->ds, port, NULL);
4052 if (ret)
4053 return ret;
4054 } else if (magic_switched_off) {
4055 ksz_switch_macaddr_put(dev->ds);
4056 }
4057
4058 ret = dev->dev_ops->pme_pwrite8(dev, port, regs[REG_PORT_PME_CTRL],
4059 pme_ctrl);
4060 if (ret) {
4061 if (magic_switched_on)
4062 ksz_switch_macaddr_put(dev->ds);
4063 return ret;
4064 }
4065
4066 return 0;
4067 }
4068
4069 /**
4070 * ksz_wol_pre_shutdown - Prepares the switch device for shutdown while
4071 * considering Wake-on-LAN (WoL) settings.
4072 * @dev: The switch device structure.
4073 * @wol_enabled: Pointer to a boolean which will be set to true if WoL is
4074 * enabled on any port.
4075 *
4076 * This function prepares the switch device for a safe shutdown while taking
4077 * into account the Wake-on-LAN (WoL) settings on the user ports. It updates
4078 * the wol_enabled flag accordingly to reflect whether WoL is active on any
4079 * port.
4080 */
ksz_wol_pre_shutdown(struct ksz_device * dev,bool * wol_enabled)4081 static void ksz_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled)
4082 {
4083 const struct ksz_dev_ops *ops = dev->dev_ops;
4084 const u16 *regs = dev->info->regs;
4085 u8 pme_pin_en = PME_ENABLE;
4086 struct dsa_port *dp;
4087 int ret;
4088
4089 *wol_enabled = false;
4090
4091 if (!is_ksz9477(dev) && !ksz_is_ksz87xx(dev))
4092 return;
4093
4094 if (!dev->wakeup_source)
4095 return;
4096
4097 dsa_switch_for_each_user_port(dp, dev->ds) {
4098 u8 pme_ctrl = 0;
4099
4100 ret = ops->pme_pread8(dev, dp->index,
4101 regs[REG_PORT_PME_CTRL], &pme_ctrl);
4102 if (!ret && pme_ctrl)
4103 *wol_enabled = true;
4104
4105 /* make sure there are no pending wake events which would
4106 * prevent the device from going to sleep/shutdown.
4107 */
4108 ksz_handle_wake_reason(dev, dp->index);
4109 }
4110
4111 /* Now we are save to enable PME pin. */
4112 if (*wol_enabled) {
4113 if (dev->pme_active_high)
4114 pme_pin_en |= PME_POLARITY;
4115 ops->pme_write8(dev, regs[REG_SW_PME_CTRL], pme_pin_en);
4116 if (ksz_is_ksz87xx(dev))
4117 ksz_write8(dev, KSZ87XX_REG_INT_EN, KSZ87XX_INT_PME_MASK);
4118 }
4119 }
4120
ksz_port_set_mac_address(struct dsa_switch * ds,int port,const unsigned char * addr)4121 static int ksz_port_set_mac_address(struct dsa_switch *ds, int port,
4122 const unsigned char *addr)
4123 {
4124 struct dsa_port *dp = dsa_to_port(ds, port);
4125 struct ethtool_wolinfo wol;
4126
4127 if (dp->hsr_dev) {
4128 dev_err(ds->dev,
4129 "Cannot change MAC address on port %d with active HSR offload\n",
4130 port);
4131 return -EBUSY;
4132 }
4133
4134 /* Need to initialize variable as the code to fill in settings may
4135 * not be executed.
4136 */
4137 wol.wolopts = 0;
4138
4139 ksz_get_wol(ds, dp->index, &wol);
4140 if (wol.wolopts & WAKE_MAGIC) {
4141 dev_err(ds->dev,
4142 "Cannot change MAC address on port %d with active Wake on Magic Packet\n",
4143 port);
4144 return -EBUSY;
4145 }
4146
4147 return 0;
4148 }
4149
4150 /**
4151 * ksz_is_port_mac_global_usable - Check if the MAC address on a given port
4152 * can be used as a global address.
4153 * @ds: Pointer to the DSA switch structure.
4154 * @port: The port number on which the MAC address is to be checked.
4155 *
4156 * This function examines the MAC address set on the specified port and
4157 * determines if it can be used as a global address for the switch.
4158 *
4159 * Return: true if the port's MAC address can be used as a global address, false
4160 * otherwise.
4161 */
ksz_is_port_mac_global_usable(struct dsa_switch * ds,int port)4162 bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port)
4163 {
4164 struct net_device *user = dsa_to_port(ds, port)->user;
4165 const unsigned char *addr = user->dev_addr;
4166 struct ksz_switch_macaddr *switch_macaddr;
4167 struct ksz_device *dev = ds->priv;
4168
4169 ASSERT_RTNL();
4170
4171 switch_macaddr = dev->switch_macaddr;
4172 if (switch_macaddr && !ether_addr_equal(switch_macaddr->addr, addr))
4173 return false;
4174
4175 return true;
4176 }
4177
4178 /**
4179 * ksz_switch_macaddr_get - Program the switch's MAC address register.
4180 * @ds: DSA switch instance.
4181 * @port: Port number.
4182 * @extack: Netlink extended acknowledgment.
4183 *
4184 * This function programs the switch's MAC address register with the MAC address
4185 * of the requesting user port. This single address is used by the switch for
4186 * multiple features like HSR self-address filtering and WoL. Other user ports
4187 * can share ownership of this address as long as their MAC address is the same.
4188 * The MAC addresses of user ports must not change while they have ownership of
4189 * the switch MAC address.
4190 *
4191 * Return: 0 on success, or other error codes on failure.
4192 */
ksz_switch_macaddr_get(struct dsa_switch * ds,int port,struct netlink_ext_ack * extack)4193 int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
4194 struct netlink_ext_ack *extack)
4195 {
4196 struct net_device *user = dsa_to_port(ds, port)->user;
4197 const unsigned char *addr = user->dev_addr;
4198 struct ksz_switch_macaddr *switch_macaddr;
4199 struct ksz_device *dev = ds->priv;
4200 const u16 *regs = dev->info->regs;
4201 int i, ret;
4202
4203 /* Make sure concurrent MAC address changes are blocked */
4204 ASSERT_RTNL();
4205
4206 switch_macaddr = dev->switch_macaddr;
4207 if (switch_macaddr) {
4208 if (!ether_addr_equal(switch_macaddr->addr, addr)) {
4209 NL_SET_ERR_MSG_FMT_MOD(extack,
4210 "Switch already configured for MAC address %pM",
4211 switch_macaddr->addr);
4212 return -EBUSY;
4213 }
4214
4215 refcount_inc(&switch_macaddr->refcount);
4216 return 0;
4217 }
4218
4219 switch_macaddr = kzalloc(sizeof(*switch_macaddr), GFP_KERNEL);
4220 if (!switch_macaddr)
4221 return -ENOMEM;
4222
4223 ether_addr_copy(switch_macaddr->addr, addr);
4224 refcount_set(&switch_macaddr->refcount, 1);
4225 dev->switch_macaddr = switch_macaddr;
4226
4227 /* Program the switch MAC address to hardware */
4228 for (i = 0; i < ETH_ALEN; i++) {
4229 ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]);
4230 if (ret)
4231 goto macaddr_drop;
4232 }
4233
4234 return 0;
4235
4236 macaddr_drop:
4237 dev->switch_macaddr = NULL;
4238 refcount_set(&switch_macaddr->refcount, 0);
4239 kfree(switch_macaddr);
4240
4241 return ret;
4242 }
4243
ksz_switch_macaddr_put(struct dsa_switch * ds)4244 void ksz_switch_macaddr_put(struct dsa_switch *ds)
4245 {
4246 struct ksz_switch_macaddr *switch_macaddr;
4247 struct ksz_device *dev = ds->priv;
4248 const u16 *regs = dev->info->regs;
4249 int i;
4250
4251 /* Make sure concurrent MAC address changes are blocked */
4252 ASSERT_RTNL();
4253
4254 switch_macaddr = dev->switch_macaddr;
4255 if (!refcount_dec_and_test(&switch_macaddr->refcount))
4256 return;
4257
4258 for (i = 0; i < ETH_ALEN; i++)
4259 ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, 0);
4260
4261 dev->switch_macaddr = NULL;
4262 kfree(switch_macaddr);
4263 }
4264
ksz_hsr_join(struct dsa_switch * ds,int port,struct net_device * hsr,struct netlink_ext_ack * extack)4265 static int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr,
4266 struct netlink_ext_ack *extack)
4267 {
4268 struct ksz_device *dev = ds->priv;
4269 enum hsr_version ver;
4270 int ret;
4271
4272 ret = hsr_get_version(hsr, &ver);
4273 if (ret)
4274 return ret;
4275
4276 if (dev->chip_id != KSZ9477_CHIP_ID) {
4277 NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload");
4278 return -EOPNOTSUPP;
4279 }
4280
4281 /* KSZ9477 can support HW offloading of only 1 HSR device */
4282 if (dev->hsr_dev && hsr != dev->hsr_dev) {
4283 NL_SET_ERR_MSG_MOD(extack, "Offload supported for a single HSR");
4284 return -EOPNOTSUPP;
4285 }
4286
4287 /* KSZ9477 only supports HSR v0 and v1 */
4288 if (!(ver == HSR_V0 || ver == HSR_V1)) {
4289 NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported");
4290 return -EOPNOTSUPP;
4291 }
4292
4293 /* KSZ9477 can only perform HSR offloading for up to two ports */
4294 if (hweight8(dev->hsr_ports) >= 2) {
4295 NL_SET_ERR_MSG_MOD(extack,
4296 "Cannot offload more than two ports - using software HSR");
4297 return -EOPNOTSUPP;
4298 }
4299
4300 /* Self MAC address filtering, to avoid frames traversing
4301 * the HSR ring more than once.
4302 */
4303 ret = ksz_switch_macaddr_get(ds, port, extack);
4304 if (ret)
4305 return ret;
4306
4307 ksz9477_hsr_join(ds, port, hsr);
4308 dev->hsr_dev = hsr;
4309 dev->hsr_ports |= BIT(port);
4310
4311 return 0;
4312 }
4313
ksz_hsr_leave(struct dsa_switch * ds,int port,struct net_device * hsr)4314 static int ksz_hsr_leave(struct dsa_switch *ds, int port,
4315 struct net_device *hsr)
4316 {
4317 struct ksz_device *dev = ds->priv;
4318
4319 WARN_ON(dev->chip_id != KSZ9477_CHIP_ID);
4320
4321 ksz9477_hsr_leave(ds, port, hsr);
4322 dev->hsr_ports &= ~BIT(port);
4323 if (!dev->hsr_ports)
4324 dev->hsr_dev = NULL;
4325
4326 ksz_switch_macaddr_put(ds);
4327
4328 return 0;
4329 }
4330
4331 static const struct dsa_switch_ops ksz_switch_ops = {
4332 .get_tag_protocol = ksz_get_tag_protocol,
4333 .connect_tag_protocol = ksz_connect_tag_protocol,
4334 .get_phy_flags = ksz_get_phy_flags,
4335 .setup = ksz_setup,
4336 .teardown = ksz_teardown,
4337 .phy_read = ksz_phy_read16,
4338 .phy_write = ksz_phy_write16,
4339 .phylink_get_caps = ksz_phylink_get_caps,
4340 .port_setup = ksz_port_setup,
4341 .set_ageing_time = ksz_set_ageing_time,
4342 .get_strings = ksz_get_strings,
4343 .get_ethtool_stats = ksz_get_ethtool_stats,
4344 .get_sset_count = ksz_sset_count,
4345 .port_bridge_join = ksz_port_bridge_join,
4346 .port_bridge_leave = ksz_port_bridge_leave,
4347 .port_hsr_join = ksz_hsr_join,
4348 .port_hsr_leave = ksz_hsr_leave,
4349 .port_set_mac_address = ksz_port_set_mac_address,
4350 .port_stp_state_set = ksz_port_stp_state_set,
4351 .port_teardown = ksz_port_teardown,
4352 .port_pre_bridge_flags = ksz_port_pre_bridge_flags,
4353 .port_bridge_flags = ksz_port_bridge_flags,
4354 .port_fast_age = ksz_port_fast_age,
4355 .port_vlan_filtering = ksz_port_vlan_filtering,
4356 .port_vlan_add = ksz_port_vlan_add,
4357 .port_vlan_del = ksz_port_vlan_del,
4358 .port_fdb_dump = ksz_port_fdb_dump,
4359 .port_fdb_add = ksz_port_fdb_add,
4360 .port_fdb_del = ksz_port_fdb_del,
4361 .port_mdb_add = ksz_port_mdb_add,
4362 .port_mdb_del = ksz_port_mdb_del,
4363 .port_mirror_add = ksz_port_mirror_add,
4364 .port_mirror_del = ksz_port_mirror_del,
4365 .get_stats64 = ksz_get_stats64,
4366 .get_pause_stats = ksz_get_pause_stats,
4367 .port_change_mtu = ksz_change_mtu,
4368 .port_max_mtu = ksz_max_mtu,
4369 .get_wol = ksz_get_wol,
4370 .set_wol = ksz_set_wol,
4371 .get_ts_info = ksz_get_ts_info,
4372 .port_hwtstamp_get = ksz_hwtstamp_get,
4373 .port_hwtstamp_set = ksz_hwtstamp_set,
4374 .port_txtstamp = ksz_port_txtstamp,
4375 .port_rxtstamp = ksz_port_rxtstamp,
4376 .cls_flower_add = ksz_cls_flower_add,
4377 .cls_flower_del = ksz_cls_flower_del,
4378 .port_setup_tc = ksz_setup_tc,
4379 .get_mac_eee = ksz_get_mac_eee,
4380 .set_mac_eee = ksz_set_mac_eee,
4381 .port_get_default_prio = ksz_port_get_default_prio,
4382 .port_set_default_prio = ksz_port_set_default_prio,
4383 .port_get_dscp_prio = ksz_port_get_dscp_prio,
4384 .port_add_dscp_prio = ksz_port_add_dscp_prio,
4385 .port_del_dscp_prio = ksz_port_del_dscp_prio,
4386 .port_get_apptrust = ksz_port_get_apptrust,
4387 .port_set_apptrust = ksz_port_set_apptrust,
4388 };
4389
ksz_switch_alloc(struct device * base,void * priv)4390 struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
4391 {
4392 struct dsa_switch *ds;
4393 struct ksz_device *swdev;
4394
4395 ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
4396 if (!ds)
4397 return NULL;
4398
4399 ds->dev = base;
4400 ds->num_ports = DSA_MAX_PORTS;
4401 ds->ops = &ksz_switch_ops;
4402
4403 swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
4404 if (!swdev)
4405 return NULL;
4406
4407 ds->priv = swdev;
4408 swdev->dev = base;
4409
4410 swdev->ds = ds;
4411 swdev->priv = priv;
4412
4413 return swdev;
4414 }
4415 EXPORT_SYMBOL(ksz_switch_alloc);
4416
4417 /**
4418 * ksz_switch_shutdown - Shutdown routine for the switch device.
4419 * @dev: The switch device structure.
4420 *
4421 * This function is responsible for initiating a shutdown sequence for the
4422 * switch device. It invokes the reset operation defined in the device
4423 * operations, if available, to reset the switch. Subsequently, it calls the
4424 * DSA framework's shutdown function to ensure a proper shutdown of the DSA
4425 * switch.
4426 */
ksz_switch_shutdown(struct ksz_device * dev)4427 void ksz_switch_shutdown(struct ksz_device *dev)
4428 {
4429 bool wol_enabled = false;
4430
4431 ksz_wol_pre_shutdown(dev, &wol_enabled);
4432
4433 if (dev->dev_ops->reset && !wol_enabled)
4434 dev->dev_ops->reset(dev);
4435
4436 dsa_switch_shutdown(dev->ds);
4437 }
4438 EXPORT_SYMBOL(ksz_switch_shutdown);
4439
ksz_parse_rgmii_delay(struct ksz_device * dev,int port_num,struct device_node * port_dn)4440 static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
4441 struct device_node *port_dn)
4442 {
4443 phy_interface_t phy_mode = dev->ports[port_num].interface;
4444 int rx_delay = -1, tx_delay = -1;
4445
4446 if (!phy_interface_mode_is_rgmii(phy_mode))
4447 return;
4448
4449 of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
4450 of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
4451
4452 if (rx_delay == -1 && tx_delay == -1) {
4453 dev_warn(dev->dev,
4454 "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, "
4455 "please update device tree to specify \"rx-internal-delay-ps\" and "
4456 "\"tx-internal-delay-ps\"",
4457 port_num);
4458
4459 if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
4460 phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
4461 rx_delay = 2000;
4462
4463 if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID ||
4464 phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
4465 tx_delay = 2000;
4466 }
4467
4468 if (rx_delay < 0)
4469 rx_delay = 0;
4470 if (tx_delay < 0)
4471 tx_delay = 0;
4472
4473 dev->ports[port_num].rgmii_rx_val = rx_delay;
4474 dev->ports[port_num].rgmii_tx_val = tx_delay;
4475 }
4476
4477 /**
4478 * ksz_drive_strength_to_reg() - Convert drive strength value to corresponding
4479 * register value.
4480 * @array: The array of drive strength values to search.
4481 * @array_size: The size of the array.
4482 * @microamp: The drive strength value in microamp to be converted.
4483 *
4484 * This function searches the array of drive strength values for the given
4485 * microamp value and returns the corresponding register value for that drive.
4486 *
4487 * Returns: If found, the corresponding register value for that drive strength
4488 * is returned. Otherwise, -EINVAL is returned indicating an invalid value.
4489 */
ksz_drive_strength_to_reg(const struct ksz_drive_strength * array,size_t array_size,int microamp)4490 static int ksz_drive_strength_to_reg(const struct ksz_drive_strength *array,
4491 size_t array_size, int microamp)
4492 {
4493 int i;
4494
4495 for (i = 0; i < array_size; i++) {
4496 if (array[i].microamp == microamp)
4497 return array[i].reg_val;
4498 }
4499
4500 return -EINVAL;
4501 }
4502
4503 /**
4504 * ksz_drive_strength_error() - Report invalid drive strength value
4505 * @dev: ksz device
4506 * @array: The array of drive strength values to search.
4507 * @array_size: The size of the array.
4508 * @microamp: Invalid drive strength value in microamp
4509 *
4510 * This function logs an error message when an unsupported drive strength value
4511 * is detected. It lists out all the supported drive strength values for
4512 * reference in the error message.
4513 */
ksz_drive_strength_error(struct ksz_device * dev,const struct ksz_drive_strength * array,size_t array_size,int microamp)4514 static void ksz_drive_strength_error(struct ksz_device *dev,
4515 const struct ksz_drive_strength *array,
4516 size_t array_size, int microamp)
4517 {
4518 char supported_values[100];
4519 size_t remaining_size;
4520 int added_len;
4521 char *ptr;
4522 int i;
4523
4524 remaining_size = sizeof(supported_values);
4525 ptr = supported_values;
4526
4527 for (i = 0; i < array_size; i++) {
4528 added_len = snprintf(ptr, remaining_size,
4529 i == 0 ? "%d" : ", %d", array[i].microamp);
4530
4531 if (added_len >= remaining_size)
4532 break;
4533
4534 ptr += added_len;
4535 remaining_size -= added_len;
4536 }
4537
4538 dev_err(dev->dev, "Invalid drive strength %d, supported values are %s\n",
4539 microamp, supported_values);
4540 }
4541
4542 /**
4543 * ksz9477_drive_strength_write() - Set the drive strength for specific KSZ9477
4544 * chip variants.
4545 * @dev: ksz device
4546 * @props: Array of drive strength properties to be applied
4547 * @num_props: Number of properties in the array
4548 *
4549 * This function configures the drive strength for various KSZ9477 chip variants
4550 * based on the provided properties. It handles chip-specific nuances and
4551 * ensures only valid drive strengths are written to the respective chip.
4552 *
4553 * Return: 0 on successful configuration, a negative error code on failure.
4554 */
ksz9477_drive_strength_write(struct ksz_device * dev,struct ksz_driver_strength_prop * props,int num_props)4555 static int ksz9477_drive_strength_write(struct ksz_device *dev,
4556 struct ksz_driver_strength_prop *props,
4557 int num_props)
4558 {
4559 size_t array_size = ARRAY_SIZE(ksz9477_drive_strengths);
4560 int i, ret, reg;
4561 u8 mask = 0;
4562 u8 val = 0;
4563
4564 if (props[KSZ_DRIVER_STRENGTH_IO].value != -1)
4565 dev_warn(dev->dev, "%s is not supported by this chip variant\n",
4566 props[KSZ_DRIVER_STRENGTH_IO].name);
4567
4568 if (dev->chip_id == KSZ8795_CHIP_ID ||
4569 dev->chip_id == KSZ8794_CHIP_ID ||
4570 dev->chip_id == KSZ8765_CHIP_ID)
4571 reg = KSZ8795_REG_SW_CTRL_20;
4572 else
4573 reg = KSZ9477_REG_SW_IO_STRENGTH;
4574
4575 for (i = 0; i < num_props; i++) {
4576 if (props[i].value == -1)
4577 continue;
4578
4579 ret = ksz_drive_strength_to_reg(ksz9477_drive_strengths,
4580 array_size, props[i].value);
4581 if (ret < 0) {
4582 ksz_drive_strength_error(dev, ksz9477_drive_strengths,
4583 array_size, props[i].value);
4584 return ret;
4585 }
4586
4587 mask |= SW_DRIVE_STRENGTH_M << props[i].offset;
4588 val |= ret << props[i].offset;
4589 }
4590
4591 return ksz_rmw8(dev, reg, mask, val);
4592 }
4593
4594 /**
4595 * ksz88x3_drive_strength_write() - Set the drive strength configuration for
4596 * KSZ8863 compatible chip variants.
4597 * @dev: ksz device
4598 * @props: Array of drive strength properties to be set
4599 * @num_props: Number of properties in the array
4600 *
4601 * This function applies the specified drive strength settings to KSZ88X3 chip
4602 * variants (KSZ8873, KSZ8863).
4603 * It ensures the configurations align with what the chip variant supports and
4604 * warns or errors out on unsupported settings.
4605 *
4606 * Return: 0 on success, error code otherwise
4607 */
ksz88x3_drive_strength_write(struct ksz_device * dev,struct ksz_driver_strength_prop * props,int num_props)4608 static int ksz88x3_drive_strength_write(struct ksz_device *dev,
4609 struct ksz_driver_strength_prop *props,
4610 int num_props)
4611 {
4612 size_t array_size = ARRAY_SIZE(ksz88x3_drive_strengths);
4613 int microamp;
4614 int i, ret;
4615
4616 for (i = 0; i < num_props; i++) {
4617 if (props[i].value == -1 || i == KSZ_DRIVER_STRENGTH_IO)
4618 continue;
4619
4620 dev_warn(dev->dev, "%s is not supported by this chip variant\n",
4621 props[i].name);
4622 }
4623
4624 microamp = props[KSZ_DRIVER_STRENGTH_IO].value;
4625 ret = ksz_drive_strength_to_reg(ksz88x3_drive_strengths, array_size,
4626 microamp);
4627 if (ret < 0) {
4628 ksz_drive_strength_error(dev, ksz88x3_drive_strengths,
4629 array_size, microamp);
4630 return ret;
4631 }
4632
4633 return ksz_rmw8(dev, KSZ8873_REG_GLOBAL_CTRL_12,
4634 KSZ8873_DRIVE_STRENGTH_16MA, ret);
4635 }
4636
4637 /**
4638 * ksz_parse_drive_strength() - Extract and apply drive strength configurations
4639 * from device tree properties.
4640 * @dev: ksz device
4641 *
4642 * This function reads the specified drive strength properties from the
4643 * device tree, validates against the supported chip variants, and sets
4644 * them accordingly. An error should be critical here, as the drive strength
4645 * settings are crucial for EMI compliance.
4646 *
4647 * Return: 0 on success, error code otherwise
4648 */
ksz_parse_drive_strength(struct ksz_device * dev)4649 static int ksz_parse_drive_strength(struct ksz_device *dev)
4650 {
4651 struct ksz_driver_strength_prop of_props[] = {
4652 [KSZ_DRIVER_STRENGTH_HI] = {
4653 .name = "microchip,hi-drive-strength-microamp",
4654 .offset = SW_HI_SPEED_DRIVE_STRENGTH_S,
4655 .value = -1,
4656 },
4657 [KSZ_DRIVER_STRENGTH_LO] = {
4658 .name = "microchip,lo-drive-strength-microamp",
4659 .offset = SW_LO_SPEED_DRIVE_STRENGTH_S,
4660 .value = -1,
4661 },
4662 [KSZ_DRIVER_STRENGTH_IO] = {
4663 .name = "microchip,io-drive-strength-microamp",
4664 .offset = 0, /* don't care */
4665 .value = -1,
4666 },
4667 };
4668 struct device_node *np = dev->dev->of_node;
4669 bool have_any_prop = false;
4670 int i, ret;
4671
4672 for (i = 0; i < ARRAY_SIZE(of_props); i++) {
4673 ret = of_property_read_u32(np, of_props[i].name,
4674 &of_props[i].value);
4675 if (ret && ret != -EINVAL)
4676 dev_warn(dev->dev, "Failed to read %s\n",
4677 of_props[i].name);
4678 if (ret)
4679 continue;
4680
4681 have_any_prop = true;
4682 }
4683
4684 if (!have_any_prop)
4685 return 0;
4686
4687 switch (dev->chip_id) {
4688 case KSZ88X3_CHIP_ID:
4689 return ksz88x3_drive_strength_write(dev, of_props,
4690 ARRAY_SIZE(of_props));
4691 case KSZ8795_CHIP_ID:
4692 case KSZ8794_CHIP_ID:
4693 case KSZ8765_CHIP_ID:
4694 case KSZ8563_CHIP_ID:
4695 case KSZ8567_CHIP_ID:
4696 case KSZ9477_CHIP_ID:
4697 case KSZ9563_CHIP_ID:
4698 case KSZ9567_CHIP_ID:
4699 case KSZ9893_CHIP_ID:
4700 case KSZ9896_CHIP_ID:
4701 case KSZ9897_CHIP_ID:
4702 return ksz9477_drive_strength_write(dev, of_props,
4703 ARRAY_SIZE(of_props));
4704 default:
4705 for (i = 0; i < ARRAY_SIZE(of_props); i++) {
4706 if (of_props[i].value == -1)
4707 continue;
4708
4709 dev_warn(dev->dev, "%s is not supported by this chip variant\n",
4710 of_props[i].name);
4711 }
4712 }
4713
4714 return 0;
4715 }
4716
ksz_switch_register(struct ksz_device * dev)4717 int ksz_switch_register(struct ksz_device *dev)
4718 {
4719 const struct ksz_chip_data *info;
4720 struct device_node *ports;
4721 phy_interface_t interface;
4722 unsigned int port_num;
4723 int ret;
4724 int i;
4725
4726 dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset",
4727 GPIOD_OUT_LOW);
4728 if (IS_ERR(dev->reset_gpio))
4729 return PTR_ERR(dev->reset_gpio);
4730
4731 if (dev->reset_gpio) {
4732 gpiod_set_value_cansleep(dev->reset_gpio, 1);
4733 usleep_range(10000, 12000);
4734 gpiod_set_value_cansleep(dev->reset_gpio, 0);
4735 msleep(100);
4736 }
4737
4738 mutex_init(&dev->dev_mutex);
4739 mutex_init(&dev->regmap_mutex);
4740 mutex_init(&dev->alu_mutex);
4741 mutex_init(&dev->vlan_mutex);
4742
4743 ret = ksz_switch_detect(dev);
4744 if (ret)
4745 return ret;
4746
4747 info = ksz_lookup_info(dev->chip_id);
4748 if (!info)
4749 return -ENODEV;
4750
4751 /* Update the compatible info with the probed one */
4752 dev->info = info;
4753
4754 dev_info(dev->dev, "found switch: %s, rev %i\n",
4755 dev->info->dev_name, dev->chip_rev);
4756
4757 ret = ksz_check_device_id(dev);
4758 if (ret)
4759 return ret;
4760
4761 dev->dev_ops = dev->info->ops;
4762
4763 ret = dev->dev_ops->init(dev);
4764 if (ret)
4765 return ret;
4766
4767 dev->ports = devm_kzalloc(dev->dev,
4768 dev->info->port_cnt * sizeof(struct ksz_port),
4769 GFP_KERNEL);
4770 if (!dev->ports)
4771 return -ENOMEM;
4772
4773 for (i = 0; i < dev->info->port_cnt; i++) {
4774 spin_lock_init(&dev->ports[i].mib.stats64_lock);
4775 mutex_init(&dev->ports[i].mib.cnt_mutex);
4776 dev->ports[i].mib.counters =
4777 devm_kzalloc(dev->dev,
4778 sizeof(u64) * (dev->info->mib_cnt + 1),
4779 GFP_KERNEL);
4780 if (!dev->ports[i].mib.counters)
4781 return -ENOMEM;
4782
4783 dev->ports[i].ksz_dev = dev;
4784 dev->ports[i].num = i;
4785 }
4786
4787 /* set the real number of ports */
4788 dev->ds->num_ports = dev->info->port_cnt;
4789
4790 /* set the phylink ops */
4791 dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops;
4792
4793 /* Host port interface will be self detected, or specifically set in
4794 * device tree.
4795 */
4796 for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
4797 dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
4798 if (dev->dev->of_node) {
4799 ret = of_get_phy_mode(dev->dev->of_node, &interface);
4800 if (ret == 0)
4801 dev->compat_interface = interface;
4802 ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports");
4803 if (!ports)
4804 ports = of_get_child_by_name(dev->dev->of_node, "ports");
4805 if (ports) {
4806 for_each_available_child_of_node_scoped(ports, port) {
4807 if (of_property_read_u32(port, "reg",
4808 &port_num))
4809 continue;
4810 if (!(dev->port_mask & BIT(port_num))) {
4811 of_node_put(ports);
4812 return -EINVAL;
4813 }
4814 of_get_phy_mode(port,
4815 &dev->ports[port_num].interface);
4816
4817 ksz_parse_rgmii_delay(dev, port_num, port);
4818 }
4819 of_node_put(ports);
4820 }
4821 dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
4822 "microchip,synclko-125");
4823 dev->synclko_disable = of_property_read_bool(dev->dev->of_node,
4824 "microchip,synclko-disable");
4825 if (dev->synclko_125 && dev->synclko_disable) {
4826 dev_err(dev->dev, "inconsistent synclko settings\n");
4827 return -EINVAL;
4828 }
4829
4830 dev->wakeup_source = of_property_read_bool(dev->dev->of_node,
4831 "wakeup-source");
4832 dev->pme_active_high = of_property_read_bool(dev->dev->of_node,
4833 "microchip,pme-active-high");
4834 }
4835
4836 ret = dsa_register_switch(dev->ds);
4837 if (ret) {
4838 dev->dev_ops->exit(dev);
4839 return ret;
4840 }
4841
4842 /* Read MIB counters every 30 seconds to avoid overflow. */
4843 dev->mib_read_interval = msecs_to_jiffies(5000);
4844
4845 /* Start the MIB timer. */
4846 schedule_delayed_work(&dev->mib_read, 0);
4847
4848 return ret;
4849 }
4850 EXPORT_SYMBOL(ksz_switch_register);
4851
ksz_switch_remove(struct ksz_device * dev)4852 void ksz_switch_remove(struct ksz_device *dev)
4853 {
4854 /* timer started */
4855 if (dev->mib_read_interval) {
4856 dev->mib_read_interval = 0;
4857 cancel_delayed_work_sync(&dev->mib_read);
4858 }
4859
4860 dev->dev_ops->exit(dev);
4861 dsa_unregister_switch(dev->ds);
4862
4863 if (dev->reset_gpio)
4864 gpiod_set_value_cansleep(dev->reset_gpio, 1);
4865
4866 }
4867 EXPORT_SYMBOL(ksz_switch_remove);
4868
4869 MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
4870 MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
4871 MODULE_LICENSE("GPL");
4872