xref: /linux/arch/mips/mti-malta/malta-setup.c (revision 0ea5c948cb64bab5bc7a5516774eb8536f05aa0d)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Carsten Langgaard, carstenl@mips.com
4  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
5  * Copyright (C) 2008 Dmitri Vorobiev
6  */
7 #include <linux/cpu.h>
8 #include <linux/init.h>
9 #include <linux/sched.h>
10 #include <linux/ioport.h>
11 #include <linux/irq.h>
12 #include <linux/of_fdt.h>
13 #include <linux/pci.h>
14 #include <linux/screen_info.h>
15 #include <linux/time.h>
16 #include <linux/dma-map-ops.h> /* for dma_default_coherent */
17 
18 #include <asm/fw/fw.h>
19 #include <asm/mips-cps.h>
20 #include <asm/mips-boards/generic.h>
21 #include <asm/mips-boards/malta.h>
22 #include <asm/mips-boards/maltaint.h>
23 #include <asm/dma.h>
24 #include <asm/prom.h>
25 #include <asm/traps.h>
26 #ifdef CONFIG_VT
27 #include <linux/console.h>
28 #endif
29 
30 #define ROCIT_CONFIG_GEN0		0x1f403000
31 #define  ROCIT_CONFIG_GEN0_PCI_IOCU	BIT(7)
32 
33 static struct resource standard_io_resources[] = {
34 	{
35 		.name = "dma1",
36 		.start = 0x00,
37 		.end = 0x1f,
38 		.flags = IORESOURCE_IO | IORESOURCE_BUSY
39 	},
40 	{
41 		.name = "timer",
42 		.start = 0x40,
43 		.end = 0x5f,
44 		.flags = IORESOURCE_IO | IORESOURCE_BUSY
45 	},
46 	{
47 		.name = "keyboard",
48 		.start = 0x60,
49 		.end = 0x6f,
50 		.flags = IORESOURCE_IO | IORESOURCE_BUSY
51 	},
52 	{
53 		.name = "dma page reg",
54 		.start = 0x80,
55 		.end = 0x8f,
56 		.flags = IORESOURCE_IO | IORESOURCE_BUSY
57 	},
58 	{
59 		.name = "dma2",
60 		.start = 0xc0,
61 		.end = 0xdf,
62 		.flags = IORESOURCE_IO | IORESOURCE_BUSY
63 	},
64 };
65 
get_system_type(void)66 const char *get_system_type(void)
67 {
68 	return "MIPS Malta";
69 }
70 
71 #ifdef CONFIG_BLK_DEV_FD
fd_activate(void)72 static void __init fd_activate(void)
73 {
74 	/*
75 	 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
76 	 * Controller.
77 	 * Done by YAMON 2.00 onwards
78 	 */
79 	/* Entering config state. */
80 	SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
81 
82 	/* Activate floppy controller. */
83 	SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
84 	SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
85 	SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
86 	SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
87 
88 	/* Exit config state. */
89 	SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
90 }
91 #endif
92 
plat_setup_iocoherency(void)93 static void __init plat_setup_iocoherency(void)
94 {
95 	u32 cfg;
96 
97 	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) {
98 		if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
99 			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
100 			pr_info("Enabled Bonito CPU coherency\n");
101 			dma_default_coherent = true;
102 		}
103 		if (strstr(fw_getcmdline(), "iobcuncached")) {
104 			BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
105 			BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
106 				~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
107 				  BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
108 			pr_info("Disabled Bonito IOBC coherency\n");
109 		} else {
110 			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
111 			BONITO_PCIMEMBASECFG |=
112 				(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
113 				 BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
114 			pr_info("Enabled Bonito IOBC coherency\n");
115 		}
116 	} else if (mips_cps_numiocu(0) != 0) {
117 		/* Nothing special needs to be done to enable coherency */
118 		pr_info("CMP IOCU detected\n");
119 		cfg = __raw_readl((u32 *)CKSEG1ADDR(ROCIT_CONFIG_GEN0));
120 		if (cfg & ROCIT_CONFIG_GEN0_PCI_IOCU)
121 			dma_default_coherent = true;
122 		else
123 			pr_crit("IOCU OPERATION DISABLED BY SWITCH - DEFAULTING TO SW IO COHERENCY\n");
124 	}
125 
126 	if (dma_default_coherent)
127 		pr_info("Hardware DMA cache coherency enabled\n");
128 	else
129 		pr_info("Software DMA cache coherency enabled\n");
130 }
131 
pci_clock_check(void)132 static void __init pci_clock_check(void)
133 {
134 	unsigned int __iomem *jmpr_p =
135 		(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
136 	int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
137 	static const int pciclocks[] __initconst = {
138 		33, 20, 25, 30, 12, 16, 37, 10
139 	};
140 	int pciclock = pciclocks[jmpr];
141 	char *optptr, *argptr = fw_getcmdline();
142 
143 	/*
144 	 * If user passed a pci_clock= option, don't tack on another one
145 	 */
146 	optptr = strstr(argptr, "pci_clock=");
147 	if (optptr && (optptr == argptr || optptr[-1] == ' '))
148 		return;
149 
150 	if (pciclock != 33) {
151 		pr_warn("WARNING: PCI clock is %dMHz, setting pci_clock\n",
152 			pciclock);
153 		argptr += strlen(argptr);
154 		sprintf(argptr, " pci_clock=%d", pciclock);
155 		if (pciclock < 20 || pciclock > 66)
156 			pr_warn("WARNING: IDE timing calculations will be "
157 			        "incorrect\n");
158 	}
159 }
160 
161 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
screen_info_setup(void)162 static void __init screen_info_setup(void)
163 {
164 	static struct screen_info si = {
165 		.orig_x = 0,
166 		.orig_y = 25,
167 		.ext_mem_k = 0,
168 		.orig_video_page = 0,
169 		.orig_video_mode = 0,
170 		.orig_video_cols = 80,
171 		.unused2 = 0,
172 		.orig_video_ega_bx = 0,
173 		.unused3 = 0,
174 		.orig_video_lines = 25,
175 		.orig_video_isVGA = VIDEO_TYPE_VGAC,
176 		.orig_video_points = 16
177 	};
178 
179 	vgacon_register_screen(&si);
180 }
181 #endif
182 
bonito_quirks_setup(void)183 static void __init bonito_quirks_setup(void)
184 {
185 	char *argptr;
186 
187 	argptr = fw_getcmdline();
188 	if (strstr(argptr, "debug")) {
189 		BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
190 		pr_info("Enabled Bonito debug mode\n");
191 	} else
192 		BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
193 }
194 
plat_get_fdt(void)195 void __init *plat_get_fdt(void)
196 {
197 	return (void *)__dtb_start;
198 }
199 
plat_mem_setup(void)200 void __init plat_mem_setup(void)
201 {
202 	unsigned int i;
203 	void *fdt = plat_get_fdt();
204 
205 	fdt = malta_dt_shim(fdt);
206 	__dt_setup_arch(fdt);
207 
208 	if (IS_ENABLED(CONFIG_EVA))
209 		/* EVA has already been configured in mach-malta/kernel-init.h */
210 		pr_info("Enhanced Virtual Addressing (EVA) activated\n");
211 
212 	mips_pcibios_init();
213 
214 	/* Request I/O space for devices used on the Malta board. */
215 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
216 		request_resource(&ioport_resource, standard_io_resources+i);
217 
218 	/*
219 	 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
220 	 */
221 	enable_dma(4);
222 
223 	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO)
224 		bonito_quirks_setup();
225 
226 	plat_setup_iocoherency();
227 
228 	pci_clock_check();
229 
230 #ifdef CONFIG_BLK_DEV_FD
231 	fd_activate();
232 #endif
233 
234 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
235 	screen_info_setup();
236 #endif
237 }
238