xref: /linux/drivers/target/iscsi/iscsi_target_erl0.c (revision 4f2c0a4acffbec01079c28f839422e64ddeff004)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /******************************************************************************
3  * This file contains error recovery level zero functions used by
4  * the iSCSI Target driver.
5  *
6  * (c) Copyright 2007-2013 Datera, Inc.
7  *
8  * Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
9  *
10  ******************************************************************************/
11 
12 #include <linux/sched/signal.h>
13 
14 #include <scsi/iscsi_proto.h>
15 #include <target/target_core_base.h>
16 #include <target/target_core_fabric.h>
17 
18 #include <target/iscsi/iscsi_target_core.h>
19 #include "iscsi_target_seq_pdu_list.h"
20 #include "iscsi_target_erl0.h"
21 #include "iscsi_target_erl1.h"
22 #include "iscsi_target_erl2.h"
23 #include "iscsi_target_util.h"
24 #include "iscsi_target.h"
25 
26 /*
27  *	Used to set values in struct iscsit_cmd that iscsit_dataout_check_sequence()
28  *	checks against to determine a PDU's Offset+Length is within the current
29  *	DataOUT Sequence.  Used for DataSequenceInOrder=Yes only.
30  */
iscsit_set_dataout_sequence_values(struct iscsit_cmd * cmd)31 void iscsit_set_dataout_sequence_values(
32 	struct iscsit_cmd *cmd)
33 {
34 	struct iscsit_conn *conn = cmd->conn;
35 	/*
36 	 * Still set seq_start_offset and seq_end_offset for Unsolicited
37 	 * DataOUT, even if DataSequenceInOrder=No.
38 	 */
39 	if (cmd->unsolicited_data) {
40 		cmd->seq_start_offset = cmd->write_data_done;
41 		cmd->seq_end_offset = min(cmd->se_cmd.data_length,
42 					conn->sess->sess_ops->FirstBurstLength);
43 		return;
44 	}
45 
46 	if (!conn->sess->sess_ops->DataSequenceInOrder)
47 		return;
48 
49 	if (!cmd->seq_start_offset && !cmd->seq_end_offset) {
50 		cmd->seq_start_offset = cmd->write_data_done;
51 		cmd->seq_end_offset = (cmd->se_cmd.data_length >
52 			conn->sess->sess_ops->MaxBurstLength) ?
53 			(cmd->write_data_done +
54 			conn->sess->sess_ops->MaxBurstLength) : cmd->se_cmd.data_length;
55 	} else {
56 		cmd->seq_start_offset = cmd->seq_end_offset;
57 		cmd->seq_end_offset = ((cmd->seq_end_offset +
58 			conn->sess->sess_ops->MaxBurstLength) >=
59 			cmd->se_cmd.data_length) ? cmd->se_cmd.data_length :
60 			(cmd->seq_end_offset +
61 			 conn->sess->sess_ops->MaxBurstLength);
62 	}
63 }
64 
iscsit_dataout_within_command_recovery_check(struct iscsit_cmd * cmd,unsigned char * buf)65 static int iscsit_dataout_within_command_recovery_check(
66 	struct iscsit_cmd *cmd,
67 	unsigned char *buf)
68 {
69 	struct iscsit_conn *conn = cmd->conn;
70 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
71 	u32 payload_length = ntoh24(hdr->dlength);
72 
73 	/*
74 	 * We do the within-command recovery checks here as it is
75 	 * the first function called in iscsi_check_pre_dataout().
76 	 * Basically, if we are in within-command recovery and
77 	 * the PDU does not contain the offset the sequence needs,
78 	 * dump the payload.
79 	 *
80 	 * This only applies to DataPDUInOrder=Yes, for
81 	 * DataPDUInOrder=No we only re-request the failed PDU
82 	 * and check that all PDUs in a sequence are received
83 	 * upon end of sequence.
84 	 */
85 	if (conn->sess->sess_ops->DataSequenceInOrder) {
86 		if ((cmd->cmd_flags & ICF_WITHIN_COMMAND_RECOVERY) &&
87 		    cmd->write_data_done != be32_to_cpu(hdr->offset))
88 			goto dump;
89 
90 		cmd->cmd_flags &= ~ICF_WITHIN_COMMAND_RECOVERY;
91 	} else {
92 		struct iscsi_seq *seq;
93 
94 		seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset),
95 					    payload_length);
96 		if (!seq)
97 			return DATAOUT_CANNOT_RECOVER;
98 		/*
99 		 * Set the struct iscsi_seq pointer to reuse later.
100 		 */
101 		cmd->seq_ptr = seq;
102 
103 		if (conn->sess->sess_ops->DataPDUInOrder) {
104 			if (seq->status ==
105 			    DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY &&
106 			   (seq->offset != be32_to_cpu(hdr->offset) ||
107 			    seq->data_sn != be32_to_cpu(hdr->datasn)))
108 				goto dump;
109 		} else {
110 			if (seq->status ==
111 			     DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY &&
112 			    seq->data_sn != be32_to_cpu(hdr->datasn))
113 				goto dump;
114 		}
115 
116 		if (seq->status == DATAOUT_SEQUENCE_COMPLETE)
117 			goto dump;
118 
119 		if (seq->status != DATAOUT_SEQUENCE_COMPLETE)
120 			seq->status = 0;
121 	}
122 
123 	return DATAOUT_NORMAL;
124 
125 dump:
126 	pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:"
127 		" 0x%08x\n", hdr->offset, payload_length, hdr->datasn);
128 	return iscsit_dump_data_payload(conn, payload_length, 1);
129 }
130 
iscsit_dataout_check_unsolicited_sequence(struct iscsit_cmd * cmd,unsigned char * buf)131 static int iscsit_dataout_check_unsolicited_sequence(
132 	struct iscsit_cmd *cmd,
133 	unsigned char *buf)
134 {
135 	u32 first_burst_len;
136 	struct iscsit_conn *conn = cmd->conn;
137 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
138 	u32 payload_length = ntoh24(hdr->dlength);
139 
140 
141 	if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) ||
142 	   ((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) {
143 		pr_err("Command ITT: 0x%08x with Offset: %u,"
144 		" Length: %u outside of Unsolicited Sequence %u:%u while"
145 		" DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
146 		be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset,
147 			cmd->seq_end_offset);
148 		return DATAOUT_CANNOT_RECOVER;
149 	}
150 
151 	first_burst_len = (cmd->first_burst_len + payload_length);
152 
153 	if (first_burst_len > conn->sess->sess_ops->FirstBurstLength) {
154 		pr_err("Total %u bytes exceeds FirstBurstLength: %u"
155 			" for this Unsolicited DataOut Burst.\n",
156 			first_burst_len, conn->sess->sess_ops->FirstBurstLength);
157 		transport_send_check_condition_and_sense(&cmd->se_cmd,
158 				TCM_INCORRECT_AMOUNT_OF_DATA, 0);
159 		return DATAOUT_CANNOT_RECOVER;
160 	}
161 
162 	/*
163 	 * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
164 	 * checks for the current Unsolicited DataOUT Sequence.
165 	 */
166 	if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
167 		/*
168 		 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
169 		 * sequence checks are handled in
170 		 * iscsit_dataout_datapduinorder_no_fbit().
171 		 */
172 		if (!conn->sess->sess_ops->DataPDUInOrder)
173 			goto out;
174 
175 		if ((first_burst_len != cmd->se_cmd.data_length) &&
176 		    (first_burst_len != conn->sess->sess_ops->FirstBurstLength)) {
177 			pr_err("Unsolicited non-immediate data"
178 			" received %u does not equal FirstBurstLength: %u, and"
179 			" does not equal ExpXferLen %u.\n", first_burst_len,
180 				conn->sess->sess_ops->FirstBurstLength,
181 				cmd->se_cmd.data_length);
182 			transport_send_check_condition_and_sense(&cmd->se_cmd,
183 					TCM_INCORRECT_AMOUNT_OF_DATA, 0);
184 			return DATAOUT_CANNOT_RECOVER;
185 		}
186 	} else {
187 		if (first_burst_len == conn->sess->sess_ops->FirstBurstLength) {
188 			pr_err("Command ITT: 0x%08x reached"
189 			" FirstBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
190 				" error.\n", cmd->init_task_tag,
191 				conn->sess->sess_ops->FirstBurstLength);
192 			return DATAOUT_CANNOT_RECOVER;
193 		}
194 		if (first_burst_len == cmd->se_cmd.data_length) {
195 			pr_err("Command ITT: 0x%08x reached"
196 			" ExpXferLen: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
197 			" error.\n", cmd->init_task_tag, cmd->se_cmd.data_length);
198 			return DATAOUT_CANNOT_RECOVER;
199 		}
200 	}
201 
202 out:
203 	return DATAOUT_NORMAL;
204 }
205 
iscsit_dataout_check_sequence(struct iscsit_cmd * cmd,unsigned char * buf)206 static int iscsit_dataout_check_sequence(
207 	struct iscsit_cmd *cmd,
208 	unsigned char *buf)
209 {
210 	u32 next_burst_len;
211 	struct iscsit_conn *conn = cmd->conn;
212 	struct iscsi_seq *seq = NULL;
213 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
214 	u32 payload_length = ntoh24(hdr->dlength);
215 
216 	/*
217 	 * For DataSequenceInOrder=Yes: Check that the offset and offset+length
218 	 * is within range as defined by iscsi_set_dataout_sequence_values().
219 	 *
220 	 * For DataSequenceInOrder=No: Check that an struct iscsi_seq exists for
221 	 * offset+length tuple.
222 	 */
223 	if (conn->sess->sess_ops->DataSequenceInOrder) {
224 		/*
225 		 * Due to possibility of recovery DataOUT sent by the initiator
226 		 * fullfilling an Recovery R2T, it's best to just dump the
227 		 * payload here, instead of erroring out.
228 		 */
229 		if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) ||
230 		   ((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) {
231 			pr_err("Command ITT: 0x%08x with Offset: %u,"
232 			" Length: %u outside of Sequence %u:%u while"
233 			" DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
234 			be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset,
235 				cmd->seq_end_offset);
236 
237 			if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
238 				return DATAOUT_CANNOT_RECOVER;
239 			return DATAOUT_WITHIN_COMMAND_RECOVERY;
240 		}
241 
242 		next_burst_len = (cmd->next_burst_len + payload_length);
243 	} else {
244 		seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset),
245 					    payload_length);
246 		if (!seq)
247 			return DATAOUT_CANNOT_RECOVER;
248 		/*
249 		 * Set the struct iscsi_seq pointer to reuse later.
250 		 */
251 		cmd->seq_ptr = seq;
252 
253 		if (seq->status == DATAOUT_SEQUENCE_COMPLETE) {
254 			if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
255 				return DATAOUT_CANNOT_RECOVER;
256 			return DATAOUT_WITHIN_COMMAND_RECOVERY;
257 		}
258 
259 		next_burst_len = (seq->next_burst_len + payload_length);
260 	}
261 
262 	if (next_burst_len > conn->sess->sess_ops->MaxBurstLength) {
263 		pr_err("Command ITT: 0x%08x, NextBurstLength: %u and"
264 			" Length: %u exceeds MaxBurstLength: %u. protocol"
265 			" error.\n", cmd->init_task_tag,
266 			(next_burst_len - payload_length),
267 			payload_length, conn->sess->sess_ops->MaxBurstLength);
268 		return DATAOUT_CANNOT_RECOVER;
269 	}
270 
271 	/*
272 	 * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
273 	 * checks for the current DataOUT Sequence.
274 	 */
275 	if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
276 		/*
277 		 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
278 		 * sequence checks are handled in
279 		 * iscsit_dataout_datapduinorder_no_fbit().
280 		 */
281 		if (!conn->sess->sess_ops->DataPDUInOrder)
282 			goto out;
283 
284 		if (conn->sess->sess_ops->DataSequenceInOrder) {
285 			if ((next_burst_len <
286 			     conn->sess->sess_ops->MaxBurstLength) &&
287 			   ((cmd->write_data_done + payload_length) <
288 			     cmd->se_cmd.data_length)) {
289 				pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
290 				" before end of DataOUT sequence, protocol"
291 				" error.\n", cmd->init_task_tag);
292 				return DATAOUT_CANNOT_RECOVER;
293 			}
294 		} else {
295 			if (next_burst_len < seq->xfer_len) {
296 				pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
297 				" before end of DataOUT sequence, protocol"
298 				" error.\n", cmd->init_task_tag);
299 				return DATAOUT_CANNOT_RECOVER;
300 			}
301 		}
302 	} else {
303 		if (conn->sess->sess_ops->DataSequenceInOrder) {
304 			if (next_burst_len ==
305 					conn->sess->sess_ops->MaxBurstLength) {
306 				pr_err("Command ITT: 0x%08x reached"
307 				" MaxBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is"
308 				" not set, protocol error.", cmd->init_task_tag,
309 					conn->sess->sess_ops->MaxBurstLength);
310 				return DATAOUT_CANNOT_RECOVER;
311 			}
312 			if ((cmd->write_data_done + payload_length) ==
313 					cmd->se_cmd.data_length) {
314 				pr_err("Command ITT: 0x%08x reached"
315 				" last DataOUT PDU in sequence but ISCSI_FLAG_"
316 				"CMD_FINAL is not set, protocol error.\n",
317 					cmd->init_task_tag);
318 				return DATAOUT_CANNOT_RECOVER;
319 			}
320 		} else {
321 			if (next_burst_len == seq->xfer_len) {
322 				pr_err("Command ITT: 0x%08x reached"
323 				" last DataOUT PDU in sequence but ISCSI_FLAG_"
324 				"CMD_FINAL is not set, protocol error.\n",
325 					cmd->init_task_tag);
326 				return DATAOUT_CANNOT_RECOVER;
327 			}
328 		}
329 	}
330 
331 out:
332 	return DATAOUT_NORMAL;
333 }
334 
iscsit_dataout_check_datasn(struct iscsit_cmd * cmd,unsigned char * buf)335 static int iscsit_dataout_check_datasn(
336 	struct iscsit_cmd *cmd,
337 	unsigned char *buf)
338 {
339 	u32 data_sn = 0;
340 	struct iscsit_conn *conn = cmd->conn;
341 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
342 	u32 payload_length = ntoh24(hdr->dlength);
343 
344 	/*
345 	 * Considering the target has no method of re-requesting DataOUT
346 	 * by DataSN, if we receieve a greater DataSN than expected we
347 	 * assume the functions for DataPDUInOrder=[Yes,No] below will
348 	 * handle it.
349 	 *
350 	 * If the DataSN is less than expected, dump the payload.
351 	 */
352 	if (conn->sess->sess_ops->DataSequenceInOrder)
353 		data_sn = cmd->data_sn;
354 	else {
355 		struct iscsi_seq *seq = cmd->seq_ptr;
356 		data_sn = seq->data_sn;
357 	}
358 
359 	if (be32_to_cpu(hdr->datasn) > data_sn) {
360 		pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
361 			" higher than expected 0x%08x.\n", cmd->init_task_tag,
362 				be32_to_cpu(hdr->datasn), data_sn);
363 		goto recover;
364 	} else if (be32_to_cpu(hdr->datasn) < data_sn) {
365 		pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
366 			" lower than expected 0x%08x, discarding payload.\n",
367 			cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn);
368 		goto dump;
369 	}
370 
371 	return DATAOUT_NORMAL;
372 
373 recover:
374 	if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
375 		pr_err("Unable to perform within-command recovery"
376 				" while ERL=0.\n");
377 		return DATAOUT_CANNOT_RECOVER;
378 	}
379 dump:
380 	if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
381 		return DATAOUT_CANNOT_RECOVER;
382 
383 	return DATAOUT_WITHIN_COMMAND_RECOVERY;
384 }
385 
iscsit_dataout_pre_datapduinorder_yes(struct iscsit_cmd * cmd,unsigned char * buf)386 static int iscsit_dataout_pre_datapduinorder_yes(
387 	struct iscsit_cmd *cmd,
388 	unsigned char *buf)
389 {
390 	int dump = 0, recovery = 0;
391 	struct iscsit_conn *conn = cmd->conn;
392 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
393 	u32 payload_length = ntoh24(hdr->dlength);
394 
395 	/*
396 	 * For DataSequenceInOrder=Yes: If the offset is greater than the global
397 	 * DataPDUInOrder=Yes offset counter in struct iscsit_cmd a protcol error has
398 	 * occurred and fail the connection.
399 	 *
400 	 * For DataSequenceInOrder=No: If the offset is greater than the per
401 	 * sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol
402 	 * error has occurred and fail the connection.
403 	 */
404 	if (conn->sess->sess_ops->DataSequenceInOrder) {
405 		if (be32_to_cpu(hdr->offset) != cmd->write_data_done) {
406 			pr_err("Command ITT: 0x%08x, received offset"
407 			" %u different than expected %u.\n", cmd->init_task_tag,
408 				be32_to_cpu(hdr->offset), cmd->write_data_done);
409 			recovery = 1;
410 			goto recover;
411 		}
412 	} else {
413 		struct iscsi_seq *seq = cmd->seq_ptr;
414 
415 		if (be32_to_cpu(hdr->offset) > seq->offset) {
416 			pr_err("Command ITT: 0x%08x, received offset"
417 			" %u greater than expected %u.\n", cmd->init_task_tag,
418 				be32_to_cpu(hdr->offset), seq->offset);
419 			recovery = 1;
420 			goto recover;
421 		} else if (be32_to_cpu(hdr->offset) < seq->offset) {
422 			pr_err("Command ITT: 0x%08x, received offset"
423 			" %u less than expected %u, discarding payload.\n",
424 				cmd->init_task_tag, be32_to_cpu(hdr->offset),
425 				seq->offset);
426 			dump = 1;
427 			goto dump;
428 		}
429 	}
430 
431 	return DATAOUT_NORMAL;
432 
433 recover:
434 	if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
435 		pr_err("Unable to perform within-command recovery"
436 				" while ERL=0.\n");
437 		return DATAOUT_CANNOT_RECOVER;
438 	}
439 dump:
440 	if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
441 		return DATAOUT_CANNOT_RECOVER;
442 
443 	return (recovery) ? iscsit_recover_dataout_sequence(cmd,
444 		be32_to_cpu(hdr->offset), payload_length) :
445 	       (dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY : DATAOUT_NORMAL;
446 }
447 
iscsit_dataout_pre_datapduinorder_no(struct iscsit_cmd * cmd,unsigned char * buf)448 static int iscsit_dataout_pre_datapduinorder_no(
449 	struct iscsit_cmd *cmd,
450 	unsigned char *buf)
451 {
452 	struct iscsi_pdu *pdu;
453 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
454 	u32 payload_length = ntoh24(hdr->dlength);
455 
456 	pdu = iscsit_get_pdu_holder(cmd, be32_to_cpu(hdr->offset),
457 				    payload_length);
458 	if (!pdu)
459 		return DATAOUT_CANNOT_RECOVER;
460 
461 	cmd->pdu_ptr = pdu;
462 
463 	switch (pdu->status) {
464 	case ISCSI_PDU_NOT_RECEIVED:
465 	case ISCSI_PDU_CRC_FAILED:
466 	case ISCSI_PDU_TIMED_OUT:
467 		break;
468 	case ISCSI_PDU_RECEIVED_OK:
469 		pr_err("Command ITT: 0x%08x received already gotten"
470 			" Offset: %u, Length: %u\n", cmd->init_task_tag,
471 				be32_to_cpu(hdr->offset), payload_length);
472 		return iscsit_dump_data_payload(cmd->conn, payload_length, 1);
473 	default:
474 		return DATAOUT_CANNOT_RECOVER;
475 	}
476 
477 	return DATAOUT_NORMAL;
478 }
479 
iscsit_dataout_update_r2t(struct iscsit_cmd * cmd,u32 offset,u32 length)480 static int iscsit_dataout_update_r2t(struct iscsit_cmd *cmd, u32 offset, u32 length)
481 {
482 	struct iscsi_r2t *r2t;
483 
484 	if (cmd->unsolicited_data)
485 		return 0;
486 
487 	r2t = iscsit_get_r2t_for_eos(cmd, offset, length);
488 	if (!r2t)
489 		return -1;
490 
491 	spin_lock_bh(&cmd->r2t_lock);
492 	r2t->seq_complete = 1;
493 	cmd->outstanding_r2ts--;
494 	spin_unlock_bh(&cmd->r2t_lock);
495 
496 	return 0;
497 }
498 
iscsit_dataout_update_datapduinorder_no(struct iscsit_cmd * cmd,u32 data_sn,int f_bit)499 static int iscsit_dataout_update_datapduinorder_no(
500 	struct iscsit_cmd *cmd,
501 	u32 data_sn,
502 	int f_bit)
503 {
504 	int ret = 0;
505 	struct iscsi_pdu *pdu = cmd->pdu_ptr;
506 
507 	pdu->data_sn = data_sn;
508 
509 	switch (pdu->status) {
510 	case ISCSI_PDU_NOT_RECEIVED:
511 		pdu->status = ISCSI_PDU_RECEIVED_OK;
512 		break;
513 	case ISCSI_PDU_CRC_FAILED:
514 		pdu->status = ISCSI_PDU_RECEIVED_OK;
515 		break;
516 	case ISCSI_PDU_TIMED_OUT:
517 		pdu->status = ISCSI_PDU_RECEIVED_OK;
518 		break;
519 	default:
520 		return DATAOUT_CANNOT_RECOVER;
521 	}
522 
523 	if (f_bit) {
524 		ret = iscsit_dataout_datapduinorder_no_fbit(cmd, pdu);
525 		if (ret == DATAOUT_CANNOT_RECOVER)
526 			return ret;
527 	}
528 
529 	return DATAOUT_NORMAL;
530 }
531 
iscsit_dataout_post_crc_passed(struct iscsit_cmd * cmd,unsigned char * buf)532 static int iscsit_dataout_post_crc_passed(
533 	struct iscsit_cmd *cmd,
534 	unsigned char *buf)
535 {
536 	int ret, send_r2t = 0;
537 	struct iscsit_conn *conn = cmd->conn;
538 	struct iscsi_seq *seq = NULL;
539 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
540 	u32 payload_length = ntoh24(hdr->dlength);
541 
542 	if (cmd->unsolicited_data) {
543 		if ((cmd->first_burst_len + payload_length) ==
544 		     conn->sess->sess_ops->FirstBurstLength) {
545 			if (iscsit_dataout_update_r2t(cmd, be32_to_cpu(hdr->offset),
546 					payload_length) < 0)
547 				return DATAOUT_CANNOT_RECOVER;
548 			send_r2t = 1;
549 		}
550 
551 		if (!conn->sess->sess_ops->DataPDUInOrder) {
552 			ret = iscsit_dataout_update_datapduinorder_no(cmd,
553 				be32_to_cpu(hdr->datasn),
554 				(hdr->flags & ISCSI_FLAG_CMD_FINAL));
555 			if (ret == DATAOUT_CANNOT_RECOVER)
556 				return ret;
557 		}
558 
559 		cmd->first_burst_len += payload_length;
560 
561 		if (conn->sess->sess_ops->DataSequenceInOrder)
562 			cmd->data_sn++;
563 		else {
564 			seq = cmd->seq_ptr;
565 			seq->data_sn++;
566 			seq->offset += payload_length;
567 		}
568 
569 		if (send_r2t) {
570 			if (seq)
571 				seq->status = DATAOUT_SEQUENCE_COMPLETE;
572 			cmd->first_burst_len = 0;
573 			cmd->unsolicited_data = 0;
574 		}
575 	} else {
576 		if (conn->sess->sess_ops->DataSequenceInOrder) {
577 			if ((cmd->next_burst_len + payload_length) ==
578 			     conn->sess->sess_ops->MaxBurstLength) {
579 				if (iscsit_dataout_update_r2t(cmd,
580 						be32_to_cpu(hdr->offset),
581 						payload_length) < 0)
582 					return DATAOUT_CANNOT_RECOVER;
583 				send_r2t = 1;
584 			}
585 
586 			if (!conn->sess->sess_ops->DataPDUInOrder) {
587 				ret = iscsit_dataout_update_datapduinorder_no(
588 						cmd, be32_to_cpu(hdr->datasn),
589 						(hdr->flags & ISCSI_FLAG_CMD_FINAL));
590 				if (ret == DATAOUT_CANNOT_RECOVER)
591 					return ret;
592 			}
593 
594 			cmd->next_burst_len += payload_length;
595 			cmd->data_sn++;
596 
597 			if (send_r2t)
598 				cmd->next_burst_len = 0;
599 		} else {
600 			seq = cmd->seq_ptr;
601 
602 			if ((seq->next_burst_len + payload_length) ==
603 			     seq->xfer_len) {
604 				if (iscsit_dataout_update_r2t(cmd,
605 						be32_to_cpu(hdr->offset),
606 						payload_length) < 0)
607 					return DATAOUT_CANNOT_RECOVER;
608 				send_r2t = 1;
609 			}
610 
611 			if (!conn->sess->sess_ops->DataPDUInOrder) {
612 				ret = iscsit_dataout_update_datapduinorder_no(
613 						cmd, be32_to_cpu(hdr->datasn),
614 						(hdr->flags & ISCSI_FLAG_CMD_FINAL));
615 				if (ret == DATAOUT_CANNOT_RECOVER)
616 					return ret;
617 			}
618 
619 			seq->data_sn++;
620 			seq->offset += payload_length;
621 			seq->next_burst_len += payload_length;
622 
623 			if (send_r2t) {
624 				seq->next_burst_len = 0;
625 				seq->status = DATAOUT_SEQUENCE_COMPLETE;
626 			}
627 		}
628 	}
629 
630 	if (send_r2t && conn->sess->sess_ops->DataSequenceInOrder)
631 		cmd->data_sn = 0;
632 
633 	cmd->write_data_done += payload_length;
634 
635 	if (cmd->write_data_done == cmd->se_cmd.data_length)
636 		return DATAOUT_SEND_TO_TRANSPORT;
637 	else if (send_r2t)
638 		return DATAOUT_SEND_R2T;
639 	else
640 		return DATAOUT_NORMAL;
641 }
642 
iscsit_dataout_post_crc_failed(struct iscsit_cmd * cmd,unsigned char * buf)643 static int iscsit_dataout_post_crc_failed(
644 	struct iscsit_cmd *cmd,
645 	unsigned char *buf)
646 {
647 	struct iscsit_conn *conn = cmd->conn;
648 	struct iscsi_pdu *pdu;
649 	struct iscsi_data *hdr = (struct iscsi_data *) buf;
650 	u32 payload_length = ntoh24(hdr->dlength);
651 
652 	if (conn->sess->sess_ops->DataPDUInOrder)
653 		goto recover;
654 	/*
655 	 * The rest of this function is only called when DataPDUInOrder=No.
656 	 */
657 	pdu = cmd->pdu_ptr;
658 
659 	switch (pdu->status) {
660 	case ISCSI_PDU_NOT_RECEIVED:
661 		pdu->status = ISCSI_PDU_CRC_FAILED;
662 		break;
663 	case ISCSI_PDU_CRC_FAILED:
664 		break;
665 	case ISCSI_PDU_TIMED_OUT:
666 		pdu->status = ISCSI_PDU_CRC_FAILED;
667 		break;
668 	default:
669 		return DATAOUT_CANNOT_RECOVER;
670 	}
671 
672 recover:
673 	return iscsit_recover_dataout_sequence(cmd, be32_to_cpu(hdr->offset),
674 						payload_length);
675 }
676 
677 /*
678  *	Called from iscsit_handle_data_out() before DataOUT Payload is received
679  *	and CRC computed.
680  */
iscsit_check_pre_dataout(struct iscsit_cmd * cmd,unsigned char * buf)681 int iscsit_check_pre_dataout(
682 	struct iscsit_cmd *cmd,
683 	unsigned char *buf)
684 {
685 	int ret;
686 	struct iscsit_conn *conn = cmd->conn;
687 
688 	ret = iscsit_dataout_within_command_recovery_check(cmd, buf);
689 	if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
690 	    (ret == DATAOUT_CANNOT_RECOVER))
691 		return ret;
692 
693 	ret = iscsit_dataout_check_datasn(cmd, buf);
694 	if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
695 	    (ret == DATAOUT_CANNOT_RECOVER))
696 		return ret;
697 
698 	if (cmd->unsolicited_data) {
699 		ret = iscsit_dataout_check_unsolicited_sequence(cmd, buf);
700 		if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
701 		    (ret == DATAOUT_CANNOT_RECOVER))
702 			return ret;
703 	} else {
704 		ret = iscsit_dataout_check_sequence(cmd, buf);
705 		if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
706 		    (ret == DATAOUT_CANNOT_RECOVER))
707 			return ret;
708 	}
709 
710 	return (conn->sess->sess_ops->DataPDUInOrder) ?
711 		iscsit_dataout_pre_datapduinorder_yes(cmd, buf) :
712 		iscsit_dataout_pre_datapduinorder_no(cmd, buf);
713 }
714 
715 /*
716  *	Called from iscsit_handle_data_out() after DataOUT Payload is received
717  *	and CRC computed.
718  */
iscsit_check_post_dataout(struct iscsit_cmd * cmd,unsigned char * buf,u8 data_crc_failed)719 int iscsit_check_post_dataout(
720 	struct iscsit_cmd *cmd,
721 	unsigned char *buf,
722 	u8 data_crc_failed)
723 {
724 	struct iscsit_conn *conn = cmd->conn;
725 
726 	cmd->dataout_timeout_retries = 0;
727 
728 	if (!data_crc_failed)
729 		return iscsit_dataout_post_crc_passed(cmd, buf);
730 	else {
731 		if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
732 			pr_err("Unable to recover from DataOUT CRC"
733 				" failure while ERL=0, closing session.\n");
734 			iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR,
735 					  buf);
736 			return DATAOUT_CANNOT_RECOVER;
737 		}
738 
739 		iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR, buf);
740 		return iscsit_dataout_post_crc_failed(cmd, buf);
741 	}
742 }
743 
iscsit_handle_time2retain_timeout(struct timer_list * t)744 void iscsit_handle_time2retain_timeout(struct timer_list *t)
745 {
746 	struct iscsit_session *sess = from_timer(sess, t, time2retain_timer);
747 	struct iscsi_portal_group *tpg = sess->tpg;
748 	struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
749 
750 	spin_lock_bh(&se_tpg->session_lock);
751 	if (sess->time2retain_timer_flags & ISCSI_TF_STOP) {
752 		spin_unlock_bh(&se_tpg->session_lock);
753 		return;
754 	}
755 	if (atomic_read(&sess->session_reinstatement)) {
756 		pr_err("Exiting Time2Retain handler because"
757 				" session_reinstatement=1\n");
758 		spin_unlock_bh(&se_tpg->session_lock);
759 		return;
760 	}
761 	sess->time2retain_timer_flags |= ISCSI_TF_EXPIRED;
762 
763 	pr_err("Time2Retain timer expired for SID: %u, cleaning up"
764 			" iSCSI session.\n", sess->sid);
765 
766 	iscsit_fill_cxn_timeout_err_stats(sess);
767 	spin_unlock_bh(&se_tpg->session_lock);
768 	iscsit_close_session(sess, false);
769 }
770 
iscsit_start_time2retain_handler(struct iscsit_session * sess)771 void iscsit_start_time2retain_handler(struct iscsit_session *sess)
772 {
773 	int tpg_active;
774 	/*
775 	 * Only start Time2Retain timer when the associated TPG is still in
776 	 * an ACTIVE (eg: not disabled or shutdown) state.
777 	 */
778 	spin_lock(&sess->tpg->tpg_state_lock);
779 	tpg_active = (sess->tpg->tpg_state == TPG_STATE_ACTIVE);
780 	spin_unlock(&sess->tpg->tpg_state_lock);
781 
782 	if (!tpg_active)
783 		return;
784 
785 	if (sess->time2retain_timer_flags & ISCSI_TF_RUNNING)
786 		return;
787 
788 	pr_debug("Starting Time2Retain timer for %u seconds on"
789 		" SID: %u\n", sess->sess_ops->DefaultTime2Retain, sess->sid);
790 
791 	sess->time2retain_timer_flags &= ~ISCSI_TF_STOP;
792 	sess->time2retain_timer_flags |= ISCSI_TF_RUNNING;
793 	mod_timer(&sess->time2retain_timer,
794 		  jiffies + sess->sess_ops->DefaultTime2Retain * HZ);
795 }
796 
iscsit_stop_time2retain_timer(struct iscsit_session * sess)797 int iscsit_stop_time2retain_timer(struct iscsit_session *sess)
798 {
799 	struct iscsi_portal_group *tpg = sess->tpg;
800 	struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
801 
802 	lockdep_assert_held(&se_tpg->session_lock);
803 
804 	if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
805 		return -1;
806 
807 	if (!(sess->time2retain_timer_flags & ISCSI_TF_RUNNING))
808 		return 0;
809 
810 	sess->time2retain_timer_flags |= ISCSI_TF_STOP;
811 	spin_unlock(&se_tpg->session_lock);
812 
813 	del_timer_sync(&sess->time2retain_timer);
814 
815 	spin_lock(&se_tpg->session_lock);
816 	sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING;
817 	pr_debug("Stopped Time2Retain Timer for SID: %u\n",
818 			sess->sid);
819 	return 0;
820 }
821 
iscsit_connection_reinstatement_rcfr(struct iscsit_conn * conn)822 void iscsit_connection_reinstatement_rcfr(struct iscsit_conn *conn)
823 {
824 	spin_lock_bh(&conn->state_lock);
825 	if (atomic_read(&conn->connection_exit)) {
826 		spin_unlock_bh(&conn->state_lock);
827 		goto sleep;
828 	}
829 
830 	if (atomic_read(&conn->transport_failed)) {
831 		spin_unlock_bh(&conn->state_lock);
832 		goto sleep;
833 	}
834 	spin_unlock_bh(&conn->state_lock);
835 
836 	if (conn->tx_thread && conn->tx_thread_active)
837 		send_sig(SIGINT, conn->tx_thread, 1);
838 	if (conn->rx_thread && conn->rx_thread_active)
839 		send_sig(SIGINT, conn->rx_thread, 1);
840 
841 sleep:
842 	wait_for_completion(&conn->conn_wait_rcfr_comp);
843 	complete(&conn->conn_post_wait_comp);
844 }
845 
iscsit_cause_connection_reinstatement(struct iscsit_conn * conn,int sleep)846 void iscsit_cause_connection_reinstatement(struct iscsit_conn *conn, int sleep)
847 {
848 	spin_lock_bh(&conn->state_lock);
849 	if (atomic_read(&conn->connection_exit)) {
850 		spin_unlock_bh(&conn->state_lock);
851 		return;
852 	}
853 
854 	if (atomic_read(&conn->transport_failed)) {
855 		spin_unlock_bh(&conn->state_lock);
856 		return;
857 	}
858 
859 	if (atomic_read(&conn->connection_reinstatement)) {
860 		spin_unlock_bh(&conn->state_lock);
861 		return;
862 	}
863 
864 	if (conn->tx_thread && conn->tx_thread_active)
865 		send_sig(SIGINT, conn->tx_thread, 1);
866 	if (conn->rx_thread && conn->rx_thread_active)
867 		send_sig(SIGINT, conn->rx_thread, 1);
868 
869 	atomic_set(&conn->connection_reinstatement, 1);
870 	if (!sleep) {
871 		spin_unlock_bh(&conn->state_lock);
872 		return;
873 	}
874 
875 	atomic_set(&conn->sleep_on_conn_wait_comp, 1);
876 	spin_unlock_bh(&conn->state_lock);
877 
878 	wait_for_completion(&conn->conn_wait_comp);
879 	complete(&conn->conn_post_wait_comp);
880 }
881 EXPORT_SYMBOL(iscsit_cause_connection_reinstatement);
882 
iscsit_fall_back_to_erl0(struct iscsit_session * sess)883 void iscsit_fall_back_to_erl0(struct iscsit_session *sess)
884 {
885 	pr_debug("Falling back to ErrorRecoveryLevel=0 for SID:"
886 			" %u\n", sess->sid);
887 
888 	atomic_set(&sess->session_fall_back_to_erl0, 1);
889 }
890 
iscsit_handle_connection_cleanup(struct iscsit_conn * conn)891 static void iscsit_handle_connection_cleanup(struct iscsit_conn *conn)
892 {
893 	struct iscsit_session *sess = conn->sess;
894 
895 	if ((sess->sess_ops->ErrorRecoveryLevel == 2) &&
896 	    !atomic_read(&sess->session_reinstatement) &&
897 	    !atomic_read(&sess->session_fall_back_to_erl0))
898 		iscsit_connection_recovery_transport_reset(conn);
899 	else {
900 		pr_debug("Performing cleanup for failed iSCSI"
901 			" Connection ID: %hu from %s\n", conn->cid,
902 			sess->sess_ops->InitiatorName);
903 		iscsit_close_connection(conn);
904 	}
905 }
906 
iscsit_take_action_for_connection_exit(struct iscsit_conn * conn,bool * conn_freed)907 void iscsit_take_action_for_connection_exit(struct iscsit_conn *conn, bool *conn_freed)
908 {
909 	*conn_freed = false;
910 
911 	spin_lock_bh(&conn->state_lock);
912 	if (atomic_read(&conn->connection_exit)) {
913 		spin_unlock_bh(&conn->state_lock);
914 		return;
915 	}
916 	atomic_set(&conn->connection_exit, 1);
917 
918 	if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) {
919 		spin_unlock_bh(&conn->state_lock);
920 		iscsit_close_connection(conn);
921 		*conn_freed = true;
922 		return;
923 	}
924 
925 	if (conn->conn_state == TARG_CONN_STATE_CLEANUP_WAIT) {
926 		spin_unlock_bh(&conn->state_lock);
927 		return;
928 	}
929 
930 	pr_debug("Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n");
931 	conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT;
932 	spin_unlock_bh(&conn->state_lock);
933 
934 	iscsit_handle_connection_cleanup(conn);
935 	*conn_freed = true;
936 }
937