1 // SPDX-License-Identifier: GPL-2.0-only
2 #include <linux/kernel.h>
3 #include <linux/module.h>
4 #include <linux/init.h>
5 #include <linux/blkdev.h>
6 #include <linux/gfp.h>
7 #include <scsi/scsi_host.h>
8 #include <linux/ata.h>
9 #include <linux/libata.h>
10
11 #include <asm/dma.h>
12 #include <asm/ecard.h>
13
14 #define DRV_NAME "pata_icside"
15
16 #define ICS_IDENT_OFFSET 0x2280
17
18 #define ICS_ARCIN_V5_INTRSTAT 0x0000
19 #define ICS_ARCIN_V5_INTROFFSET 0x0004
20
21 #define ICS_ARCIN_V6_INTROFFSET_1 0x2200
22 #define ICS_ARCIN_V6_INTRSTAT_1 0x2290
23 #define ICS_ARCIN_V6_INTROFFSET_2 0x3200
24 #define ICS_ARCIN_V6_INTRSTAT_2 0x3290
25
26 struct portinfo {
27 unsigned int dataoffset;
28 unsigned int ctrloffset;
29 unsigned int stepping;
30 };
31
32 static const struct portinfo pata_icside_portinfo_v5 = {
33 .dataoffset = 0x2800,
34 .ctrloffset = 0x2b80,
35 .stepping = 6,
36 };
37
38 static const struct portinfo pata_icside_portinfo_v6_1 = {
39 .dataoffset = 0x2000,
40 .ctrloffset = 0x2380,
41 .stepping = 6,
42 };
43
44 static const struct portinfo pata_icside_portinfo_v6_2 = {
45 .dataoffset = 0x3000,
46 .ctrloffset = 0x3380,
47 .stepping = 6,
48 };
49
50 struct pata_icside_state {
51 void __iomem *irq_port;
52 void __iomem *ioc_base;
53 unsigned int type;
54 unsigned int dma;
55 struct {
56 u8 port_sel;
57 u8 disabled;
58 unsigned int speed[ATA_MAX_DEVICES];
59 } port[2];
60 };
61
62 struct pata_icside_info {
63 struct pata_icside_state *state;
64 struct expansion_card *ec;
65 void __iomem *base;
66 void __iomem *irqaddr;
67 unsigned int irqmask;
68 const expansioncard_ops_t *irqops;
69 unsigned int mwdma_mask;
70 unsigned int nr_ports;
71 const struct portinfo *port[2];
72 unsigned long raw_base;
73 unsigned long raw_ioc_base;
74 };
75
76 #define ICS_TYPE_A3IN 0
77 #define ICS_TYPE_A3USER 1
78 #define ICS_TYPE_V6 3
79 #define ICS_TYPE_V5 15
80 #define ICS_TYPE_NOTYPE ((unsigned int)-1)
81
82 /* ---------------- Version 5 PCB Support Functions --------------------- */
83 /* Prototype: pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
84 * Purpose : enable interrupts from card
85 */
pata_icside_irqenable_arcin_v5(struct expansion_card * ec,int irqnr)86 static void pata_icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
87 {
88 struct pata_icside_state *state = ec->irq_data;
89
90 writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
91 }
92
93 /* Prototype: pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
94 * Purpose : disable interrupts from card
95 */
pata_icside_irqdisable_arcin_v5(struct expansion_card * ec,int irqnr)96 static void pata_icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
97 {
98 struct pata_icside_state *state = ec->irq_data;
99
100 readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
101 }
102
103 static const expansioncard_ops_t pata_icside_ops_arcin_v5 = {
104 .irqenable = pata_icside_irqenable_arcin_v5,
105 .irqdisable = pata_icside_irqdisable_arcin_v5,
106 };
107
108
109 /* ---------------- Version 6 PCB Support Functions --------------------- */
110 /* Prototype: pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
111 * Purpose : enable interrupts from card
112 */
pata_icside_irqenable_arcin_v6(struct expansion_card * ec,int irqnr)113 static void pata_icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
114 {
115 struct pata_icside_state *state = ec->irq_data;
116 void __iomem *base = state->irq_port;
117
118 if (!state->port[0].disabled)
119 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
120 if (!state->port[1].disabled)
121 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
122 }
123
124 /* Prototype: pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
125 * Purpose : disable interrupts from card
126 */
pata_icside_irqdisable_arcin_v6(struct expansion_card * ec,int irqnr)127 static void pata_icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
128 {
129 struct pata_icside_state *state = ec->irq_data;
130
131 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
132 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
133 }
134
135 /* Prototype: pata_icside_irqprobe(struct expansion_card *ec)
136 * Purpose : detect an active interrupt from card
137 */
pata_icside_irqpending_arcin_v6(struct expansion_card * ec)138 static int pata_icside_irqpending_arcin_v6(struct expansion_card *ec)
139 {
140 struct pata_icside_state *state = ec->irq_data;
141
142 return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
143 readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
144 }
145
146 static const expansioncard_ops_t pata_icside_ops_arcin_v6 = {
147 .irqenable = pata_icside_irqenable_arcin_v6,
148 .irqdisable = pata_icside_irqdisable_arcin_v6,
149 .irqpending = pata_icside_irqpending_arcin_v6,
150 };
151
152
153 /*
154 * SG-DMA support.
155 *
156 * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
157 * There is only one DMA controller per card, which means that only
158 * one drive can be accessed at one time. NOTE! We do not enforce that
159 * here, but we rely on the main IDE driver spotting that both
160 * interfaces use the same IRQ, which should guarantee this.
161 */
162
163 /*
164 * Configure the IOMD to give the appropriate timings for the transfer
165 * mode being requested. We take the advice of the ATA standards, and
166 * calculate the cycle time based on the transfer mode, and the EIDE
167 * MW DMA specs that the drive provides in the IDENTIFY command.
168 *
169 * We have the following IOMD DMA modes to choose from:
170 *
171 * Type Active Recovery Cycle
172 * A 250 (250) 312 (550) 562 (800)
173 * B 187 (200) 250 (550) 437 (750)
174 * C 125 (125) 125 (375) 250 (500)
175 * D 62 (50) 125 (375) 187 (425)
176 *
177 * (figures in brackets are actual measured timings on DIOR/DIOW)
178 *
179 * However, we also need to take care of the read/write active and
180 * recovery timings:
181 *
182 * Read Write
183 * Mode Active -- Recovery -- Cycle IOMD type
184 * MW0 215 50 215 480 A
185 * MW1 80 50 50 150 C
186 * MW2 70 25 25 120 C
187 */
pata_icside_set_dmamode(struct ata_port * ap,struct ata_device * adev)188 static void pata_icside_set_dmamode(struct ata_port *ap, struct ata_device *adev)
189 {
190 struct pata_icside_state *state = ap->host->private_data;
191 struct ata_timing t;
192 unsigned int cycle;
193 char iomd_type;
194
195 /*
196 * DMA is based on a 16MHz clock
197 */
198 if (ata_timing_compute(adev, adev->dma_mode, &t, 1000, 1))
199 return;
200
201 /*
202 * Choose the IOMD cycle timing which ensure that the interface
203 * satisfies the measured active, recovery and cycle times.
204 */
205 if (t.active <= 50 && t.recover <= 375 && t.cycle <= 425) {
206 iomd_type = 'D';
207 cycle = 187;
208 } else if (t.active <= 125 && t.recover <= 375 && t.cycle <= 500) {
209 iomd_type = 'C';
210 cycle = 250;
211 } else if (t.active <= 200 && t.recover <= 550 && t.cycle <= 750) {
212 iomd_type = 'B';
213 cycle = 437;
214 } else {
215 iomd_type = 'A';
216 cycle = 562;
217 }
218
219 ata_dev_info(adev, "timings: act %dns rec %dns cyc %dns (%c)\n",
220 t.active, t.recover, t.cycle, iomd_type);
221
222 state->port[ap->port_no].speed[adev->devno] = cycle;
223 }
224
pata_icside_bmdma_setup(struct ata_queued_cmd * qc)225 static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
226 {
227 struct ata_port *ap = qc->ap;
228 struct pata_icside_state *state = ap->host->private_data;
229 unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
230
231 /*
232 * We are simplex; BUG if we try to fiddle with DMA
233 * while it's active.
234 */
235 BUG_ON(dma_channel_active(state->dma));
236
237 /*
238 * Route the DMA signals to the correct interface
239 */
240 writeb(state->port[ap->port_no].port_sel, state->ioc_base);
241
242 set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]);
243 set_dma_sg(state->dma, qc->sg, qc->n_elem);
244 set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
245
246 /* issue r/w command */
247 ap->ops->sff_exec_command(ap, &qc->tf);
248 }
249
pata_icside_bmdma_start(struct ata_queued_cmd * qc)250 static void pata_icside_bmdma_start(struct ata_queued_cmd *qc)
251 {
252 struct ata_port *ap = qc->ap;
253 struct pata_icside_state *state = ap->host->private_data;
254
255 BUG_ON(dma_channel_active(state->dma));
256 enable_dma(state->dma);
257 }
258
pata_icside_bmdma_stop(struct ata_queued_cmd * qc)259 static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc)
260 {
261 struct ata_port *ap = qc->ap;
262 struct pata_icside_state *state = ap->host->private_data;
263
264 disable_dma(state->dma);
265
266 /* see ata_bmdma_stop */
267 ata_sff_dma_pause(ap);
268 }
269
pata_icside_bmdma_status(struct ata_port * ap)270 static u8 pata_icside_bmdma_status(struct ata_port *ap)
271 {
272 struct pata_icside_state *state = ap->host->private_data;
273 void __iomem *irq_port;
274
275 irq_port = state->irq_port + (ap->port_no ? ICS_ARCIN_V6_INTRSTAT_2 :
276 ICS_ARCIN_V6_INTRSTAT_1);
277
278 return readb(irq_port) & 1 ? ATA_DMA_INTR : 0;
279 }
280
icside_dma_init(struct pata_icside_info * info)281 static int icside_dma_init(struct pata_icside_info *info)
282 {
283 struct pata_icside_state *state = info->state;
284 struct expansion_card *ec = info->ec;
285 int i;
286
287 for (i = 0; i < ATA_MAX_DEVICES; i++) {
288 state->port[0].speed[i] = 480;
289 state->port[1].speed[i] = 480;
290 }
291
292 if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
293 state->dma = ec->dma;
294 info->mwdma_mask = ATA_MWDMA2;
295 }
296
297 return 0;
298 }
299
300
301 static const struct scsi_host_template pata_icside_sht = {
302 ATA_BASE_SHT(DRV_NAME),
303 .sg_tablesize = SG_MAX_SEGMENTS,
304 .dma_boundary = IOMD_DMA_BOUNDARY,
305 };
306
pata_icside_postreset(struct ata_link * link,unsigned int * classes)307 static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
308 {
309 struct ata_port *ap = link->ap;
310 struct pata_icside_state *state = ap->host->private_data;
311
312 if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
313 return ata_sff_postreset(link, classes);
314
315 state->port[ap->port_no].disabled = 1;
316
317 if (state->type == ICS_TYPE_V6) {
318 /*
319 * Disable interrupts from this port, otherwise we
320 * receive spurious interrupts from the floating
321 * interrupt line.
322 */
323 void __iomem *irq_port = state->irq_port +
324 (ap->port_no ? ICS_ARCIN_V6_INTROFFSET_2 : ICS_ARCIN_V6_INTROFFSET_1);
325 readb(irq_port);
326 }
327 }
328
329 static struct ata_port_operations pata_icside_port_ops = {
330 .inherits = &ata_bmdma_port_ops,
331 .sff_data_xfer = ata_sff_data_xfer32,
332 .bmdma_setup = pata_icside_bmdma_setup,
333 .bmdma_start = pata_icside_bmdma_start,
334 .bmdma_stop = pata_icside_bmdma_stop,
335 .bmdma_status = pata_icside_bmdma_status,
336
337 .cable_detect = ata_cable_40wire,
338 .set_dmamode = pata_icside_set_dmamode,
339 .postreset = pata_icside_postreset,
340
341 .port_start = ATA_OP_NULL, /* don't need PRD table */
342 };
343
pata_icside_setup_ioaddr(struct ata_port * ap,void __iomem * base,struct pata_icside_info * info,const struct portinfo * port)344 static void pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base,
345 struct pata_icside_info *info,
346 const struct portinfo *port)
347 {
348 struct ata_ioports *ioaddr = &ap->ioaddr;
349 void __iomem *cmd = base + port->dataoffset;
350
351 ioaddr->cmd_addr = cmd;
352 ioaddr->data_addr = cmd + (ATA_REG_DATA << port->stepping);
353 ioaddr->error_addr = cmd + (ATA_REG_ERR << port->stepping);
354 ioaddr->feature_addr = cmd + (ATA_REG_FEATURE << port->stepping);
355 ioaddr->nsect_addr = cmd + (ATA_REG_NSECT << port->stepping);
356 ioaddr->lbal_addr = cmd + (ATA_REG_LBAL << port->stepping);
357 ioaddr->lbam_addr = cmd + (ATA_REG_LBAM << port->stepping);
358 ioaddr->lbah_addr = cmd + (ATA_REG_LBAH << port->stepping);
359 ioaddr->device_addr = cmd + (ATA_REG_DEVICE << port->stepping);
360 ioaddr->status_addr = cmd + (ATA_REG_STATUS << port->stepping);
361 ioaddr->command_addr = cmd + (ATA_REG_CMD << port->stepping);
362
363 ioaddr->ctl_addr = base + port->ctrloffset;
364 ioaddr->altstatus_addr = ioaddr->ctl_addr;
365
366 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
367 info->raw_base + port->dataoffset,
368 info->raw_base + port->ctrloffset);
369
370 if (info->raw_ioc_base)
371 ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base);
372 }
373
pata_icside_register_v5(struct pata_icside_info * info)374 static int pata_icside_register_v5(struct pata_icside_info *info)
375 {
376 struct pata_icside_state *state = info->state;
377 void __iomem *base;
378
379 base = ecardm_iomap(info->ec, ECARD_RES_MEMC, 0, 0);
380 if (!base)
381 return -ENOMEM;
382
383 state->irq_port = base;
384
385 info->base = base;
386 info->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
387 info->irqmask = 1;
388 info->irqops = &pata_icside_ops_arcin_v5;
389 info->nr_ports = 1;
390 info->port[0] = &pata_icside_portinfo_v5;
391
392 info->raw_base = ecard_resource_start(info->ec, ECARD_RES_MEMC);
393
394 return 0;
395 }
396
pata_icside_register_v6(struct pata_icside_info * info)397 static int pata_icside_register_v6(struct pata_icside_info *info)
398 {
399 struct pata_icside_state *state = info->state;
400 struct expansion_card *ec = info->ec;
401 void __iomem *ioc_base, *easi_base;
402 unsigned int sel = 0;
403
404 ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
405 if (!ioc_base)
406 return -ENOMEM;
407
408 easi_base = ioc_base;
409
410 if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
411 easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
412 if (!easi_base)
413 return -ENOMEM;
414
415 /*
416 * Enable access to the EASI region.
417 */
418 sel = 1 << 5;
419 }
420
421 writeb(sel, ioc_base);
422
423 state->irq_port = easi_base;
424 state->ioc_base = ioc_base;
425 state->port[0].port_sel = sel;
426 state->port[1].port_sel = sel | 1;
427
428 info->base = easi_base;
429 info->irqops = &pata_icside_ops_arcin_v6;
430 info->nr_ports = 2;
431 info->port[0] = &pata_icside_portinfo_v6_1;
432 info->port[1] = &pata_icside_portinfo_v6_2;
433
434 info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI);
435 info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST);
436
437 return icside_dma_init(info);
438 }
439
pata_icside_add_ports(struct pata_icside_info * info)440 static int pata_icside_add_ports(struct pata_icside_info *info)
441 {
442 struct expansion_card *ec = info->ec;
443 struct ata_host *host;
444 int i;
445
446 if (info->irqaddr) {
447 ec->irqaddr = info->irqaddr;
448 ec->irqmask = info->irqmask;
449 }
450 if (info->irqops)
451 ecard_setirq(ec, info->irqops, info->state);
452
453 /*
454 * Be on the safe side - disable interrupts
455 */
456 ec->ops->irqdisable(ec, ec->irq);
457
458 host = ata_host_alloc(&ec->dev, info->nr_ports);
459 if (!host)
460 return -ENOMEM;
461
462 host->private_data = info->state;
463 host->flags = ATA_HOST_SIMPLEX;
464
465 for (i = 0; i < info->nr_ports; i++) {
466 struct ata_port *ap = host->ports[i];
467
468 ap->pio_mask = ATA_PIO4;
469 ap->mwdma_mask = info->mwdma_mask;
470 ap->flags |= ATA_FLAG_SLAVE_POSS;
471 ap->ops = &pata_icside_port_ops;
472
473 pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
474 }
475
476 return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0,
477 &pata_icside_sht);
478 }
479
pata_icside_probe(struct expansion_card * ec,const struct ecard_id * id)480 static int pata_icside_probe(struct expansion_card *ec,
481 const struct ecard_id *id)
482 {
483 struct pata_icside_state *state;
484 struct pata_icside_info info;
485 void __iomem *idmem;
486 int ret;
487
488 ret = ecard_request_resources(ec);
489 if (ret)
490 goto out;
491
492 state = devm_kzalloc(&ec->dev, sizeof(*state), GFP_KERNEL);
493 if (!state) {
494 ret = -ENOMEM;
495 goto release;
496 }
497
498 state->type = ICS_TYPE_NOTYPE;
499 state->dma = NO_DMA;
500
501 idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
502 if (idmem) {
503 unsigned int type;
504
505 type = readb(idmem + ICS_IDENT_OFFSET) & 1;
506 type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
507 type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
508 type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
509 ecardm_iounmap(ec, idmem);
510
511 state->type = type;
512 }
513
514 memset(&info, 0, sizeof(info));
515 info.state = state;
516 info.ec = ec;
517
518 switch (state->type) {
519 case ICS_TYPE_A3IN:
520 dev_warn(&ec->dev, "A3IN unsupported\n");
521 ret = -ENODEV;
522 break;
523
524 case ICS_TYPE_A3USER:
525 dev_warn(&ec->dev, "A3USER unsupported\n");
526 ret = -ENODEV;
527 break;
528
529 case ICS_TYPE_V5:
530 ret = pata_icside_register_v5(&info);
531 break;
532
533 case ICS_TYPE_V6:
534 ret = pata_icside_register_v6(&info);
535 break;
536
537 default:
538 dev_warn(&ec->dev, "unknown interface type\n");
539 ret = -ENODEV;
540 break;
541 }
542
543 if (ret == 0)
544 ret = pata_icside_add_ports(&info);
545
546 if (ret == 0)
547 goto out;
548
549 release:
550 ecard_release_resources(ec);
551 out:
552 return ret;
553 }
554
pata_icside_shutdown(struct expansion_card * ec)555 static void pata_icside_shutdown(struct expansion_card *ec)
556 {
557 struct ata_host *host = ecard_get_drvdata(ec);
558 unsigned long flags;
559
560 /*
561 * Disable interrupts from this card. We need to do
562 * this before disabling EASI since we may be accessing
563 * this register via that region.
564 */
565 local_irq_save(flags);
566 ec->ops->irqdisable(ec, ec->irq);
567 local_irq_restore(flags);
568
569 /*
570 * Reset the ROM pointer so that we can read the ROM
571 * after a soft reboot. This also disables access to
572 * the IDE taskfile via the EASI region.
573 */
574 if (host) {
575 struct pata_icside_state *state = host->private_data;
576 if (state->ioc_base)
577 writeb(0, state->ioc_base);
578 }
579 }
580
pata_icside_remove(struct expansion_card * ec)581 static void pata_icside_remove(struct expansion_card *ec)
582 {
583 struct ata_host *host = ecard_get_drvdata(ec);
584 struct pata_icside_state *state = host->private_data;
585
586 ata_host_detach(host);
587
588 pata_icside_shutdown(ec);
589
590 /*
591 * don't NULL out the drvdata - devres/libata wants it
592 * to free the ata_host structure.
593 */
594 if (state->dma != NO_DMA)
595 free_dma(state->dma);
596
597 ecard_release_resources(ec);
598 }
599
600 static const struct ecard_id pata_icside_ids[] = {
601 { MANU_ICS, PROD_ICS_IDE },
602 { MANU_ICS2, PROD_ICS2_IDE },
603 { 0xffff, 0xffff }
604 };
605
606 static struct ecard_driver pata_icside_driver = {
607 .probe = pata_icside_probe,
608 .remove = pata_icside_remove,
609 .shutdown = pata_icside_shutdown,
610 .id_table = pata_icside_ids,
611 .drv = {
612 .name = DRV_NAME,
613 },
614 };
615
pata_icside_init(void)616 static int __init pata_icside_init(void)
617 {
618 return ecard_register_driver(&pata_icside_driver);
619 }
620
pata_icside_exit(void)621 static void __exit pata_icside_exit(void)
622 {
623 ecard_remove_driver(&pata_icside_driver);
624 }
625
626 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
627 MODULE_LICENSE("GPL");
628 MODULE_DESCRIPTION("ICS PATA driver");
629
630 module_init(pata_icside_init);
631 module_exit(pata_icside_exit);
632