1 /*
2 * PCIMT specific code
3 *
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
7 *
8 * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
9 * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
10 */
11
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/irq.h>
15 #include <linux/pci.h>
16 #include <linux/serial_8250.h>
17
18 #include <asm/sni.h>
19 #include <asm/time.h>
20 #include <asm/i8259.h>
21 #include <asm/irq_cpu.h>
22
23 #define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
24 #define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
25
sni_pcimt_sc_init(void)26 static void __init sni_pcimt_sc_init(void)
27 {
28 unsigned int scsiz, sc_size;
29
30 scsiz = cacheconf & 7;
31 if (scsiz == 0) {
32 printk("Second level cache is deactivated.\n");
33 return;
34 }
35 if (scsiz >= 6) {
36 printk("Invalid second level cache size configured, "
37 "deactivating second level cache.\n");
38 cacheconf = 0;
39 return;
40 }
41
42 sc_size = 128 << scsiz;
43 printk("%dkb second level cache detected, deactivating.\n", sc_size);
44 cacheconf = 0;
45 }
46
47
48 /*
49 * A bit more gossip about the iron we're running on ...
50 */
sni_pcimt_detect(void)51 static inline void sni_pcimt_detect(void)
52 {
53 char boardtype[80];
54 unsigned char csmsr;
55 char *p = boardtype;
56 unsigned int asic;
57
58 csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
59
60 p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
61 if ((csmsr & 0x80) == 0)
62 p += sprintf(p, ", board revision %s",
63 (csmsr & 0x20) ? "D" : "C");
64 asic = csmsr & 0x80;
65 asic = (csmsr & 0x08) ? asic : !asic;
66 p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
67 printk("%s.\n", boardtype);
68 }
69
70 #define PORT(_base,_irq) \
71 { \
72 .iobase = _base, \
73 .irq = _irq, \
74 .uartclk = 1843200, \
75 .iotype = UPIO_PORT, \
76 .flags = UPF_BOOT_AUTOCONF, \
77 }
78
79 static struct plat_serial8250_port pcimt_data[] = {
80 PORT(0x3f8, 4),
81 PORT(0x2f8, 3),
82 { },
83 };
84
85 static struct platform_device pcimt_serial8250_device = {
86 .name = "serial8250",
87 .id = PLAT8250_DEV_PLATFORM,
88 .dev = {
89 .platform_data = pcimt_data,
90 },
91 };
92
93 static struct resource pcimt_cmos_rsrc[] = {
94 {
95 .start = 0x70,
96 .end = 0x71,
97 .flags = IORESOURCE_IO
98 },
99 {
100 .start = 8,
101 .end = 8,
102 .flags = IORESOURCE_IRQ
103 }
104 };
105
106 static struct platform_device pcimt_cmos_device = {
107 .name = "rtc_cmos",
108 .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc),
109 .resource = pcimt_cmos_rsrc
110 };
111
112
113 static struct resource sni_io_resource = {
114 .start = 0x00000000UL,
115 .end = 0x03bfffffUL,
116 .name = "PCIMT IO MEM",
117 .flags = IORESOURCE_IO,
118 };
119
120 static struct resource pcimt_io_resources[] = {
121 {
122 .start = 0x00,
123 .end = 0x1f,
124 .name = "dma1",
125 .flags = IORESOURCE_BUSY
126 }, {
127 .start = 0x40,
128 .end = 0x5f,
129 .name = "timer",
130 .flags = IORESOURCE_BUSY
131 }, {
132 .start = 0x60,
133 .end = 0x6f,
134 .name = "keyboard",
135 .flags = IORESOURCE_BUSY
136 }, {
137 .start = 0x80,
138 .end = 0x8f,
139 .name = "dma page reg",
140 .flags = IORESOURCE_BUSY
141 }, {
142 .start = 0xc0,
143 .end = 0xdf,
144 .name = "dma2",
145 .flags = IORESOURCE_BUSY
146 }, {
147 .start = 0xcfc,
148 .end = 0xcff,
149 .name = "PCI config data",
150 .flags = IORESOURCE_BUSY
151 }
152 };
153
154 static struct resource pcimt_mem_resources[] = {
155 {
156 /*
157 * this region should only be 4 bytes long,
158 * but it's 16MB on all RM300C I've checked
159 */
160 .start = 0x1a000000,
161 .end = 0x1affffff,
162 .name = "PCI INT ACK",
163 .flags = IORESOURCE_BUSY
164 }
165 };
166
167 static struct resource sni_mem_resource = {
168 .start = 0x18000000UL,
169 .end = 0x1fbfffffUL,
170 .name = "PCIMT PCI MEM",
171 .flags = IORESOURCE_MEM
172 };
173
sni_pcimt_resource_init(void)174 static void __init sni_pcimt_resource_init(void)
175 {
176 int i;
177
178 /* request I/O space for devices used on all i[345]86 PCs */
179 for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
180 request_resource(&sni_io_resource, pcimt_io_resources + i);
181 /* request MEM space for devices used on all i[345]86 PCs */
182 for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
183 request_resource(&sni_mem_resource, pcimt_mem_resources + i);
184 }
185
186 extern struct pci_ops sni_pcimt_ops;
187
188 #ifdef CONFIG_PCI
189 static struct pci_controller sni_controller = {
190 .pci_ops = &sni_pcimt_ops,
191 .mem_resource = &sni_mem_resource,
192 .mem_offset = 0x00000000UL,
193 .io_resource = &sni_io_resource,
194 .io_offset = 0x00000000UL,
195 .io_map_base = SNI_PORT_BASE
196 };
197 #endif
198
enable_pcimt_irq(struct irq_data * d)199 static void enable_pcimt_irq(struct irq_data *d)
200 {
201 unsigned int mask = 1 << (d->irq - PCIMT_IRQ_INT2);
202
203 *(volatile u8 *) PCIMT_IRQSEL |= mask;
204 }
205
disable_pcimt_irq(struct irq_data * d)206 void disable_pcimt_irq(struct irq_data *d)
207 {
208 unsigned int mask = ~(1 << (d->irq - PCIMT_IRQ_INT2));
209
210 *(volatile u8 *) PCIMT_IRQSEL &= mask;
211 }
212
213 static struct irq_chip pcimt_irq_type = {
214 .name = "PCIMT",
215 .irq_mask = disable_pcimt_irq,
216 .irq_unmask = enable_pcimt_irq,
217 };
218
219 /*
220 * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
221 * button interrupts. Later ...
222 */
pcimt_hwint0(void)223 static void pcimt_hwint0(void)
224 {
225 panic("Received int0 but no handler yet ...");
226 }
227
228 /*
229 * hwint 1 deals with EISA and SCSI interrupts,
230 *
231 * The EISA_INT bit in CSITPEND is high active, all others are low active.
232 */
pcimt_hwint1(void)233 static void pcimt_hwint1(void)
234 {
235 u8 pend = *(volatile char *)PCIMT_CSITPEND;
236 unsigned long flags;
237
238 if (pend & IT_EISA) {
239 int irq;
240 /*
241 * Note: ASIC PCI's builtin interrupt acknowledge feature is
242 * broken. Using it may result in loss of some or all i8259
243 * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
244 */
245 irq = i8259_irq();
246 if (unlikely(irq < 0))
247 return;
248
249 do_IRQ(irq);
250 }
251
252 if (!(pend & IT_SCSI)) {
253 flags = read_c0_status();
254 clear_c0_status(ST0_IM);
255 do_IRQ(PCIMT_IRQ_SCSI);
256 write_c0_status(flags);
257 }
258 }
259
260 /*
261 * hwint 3 should deal with the PCI A - D interrupts,
262 */
pcimt_hwint3(void)263 static void pcimt_hwint3(void)
264 {
265 u8 pend = *(volatile char *)PCIMT_CSITPEND;
266 int irq;
267
268 pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
269 pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
270 clear_c0_status(IE_IRQ3);
271 irq = PCIMT_IRQ_INT2 + ffs(pend) - 1;
272 do_IRQ(irq);
273 set_c0_status(IE_IRQ3);
274 }
275
sni_pcimt_hwint(void)276 static void sni_pcimt_hwint(void)
277 {
278 u32 pending = read_c0_cause() & read_c0_status();
279
280 if (pending & C_IRQ5)
281 do_IRQ(MIPS_CPU_IRQ_BASE + 7);
282 else if (pending & C_IRQ4)
283 do_IRQ(MIPS_CPU_IRQ_BASE + 6);
284 else if (pending & C_IRQ3)
285 pcimt_hwint3();
286 else if (pending & C_IRQ1)
287 pcimt_hwint1();
288 else if (pending & C_IRQ0) {
289 pcimt_hwint0();
290 }
291 }
292
sni_pcimt_irq_init(void)293 void __init sni_pcimt_irq_init(void)
294 {
295 int i;
296
297 *(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA;
298 mips_cpu_irq_init();
299 /* Actually we've got more interrupts to handle ... */
300 for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
301 irq_set_chip_and_handler(i, &pcimt_irq_type, handle_level_irq);
302 sni_hwint = sni_pcimt_hwint;
303 change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
304 }
305
sni_pcimt_init(void)306 void __init sni_pcimt_init(void)
307 {
308 sni_pcimt_detect();
309 sni_pcimt_sc_init();
310 ioport_resource.end = sni_io_resource.end;
311 #ifdef CONFIG_PCI
312 PCIBIOS_MIN_IO = 0x9000;
313 register_pci_controller(&sni_controller);
314 #endif
315 sni_pcimt_resource_init();
316 }
317
snirm_pcimt_setup_devinit(void)318 static int __init snirm_pcimt_setup_devinit(void)
319 {
320 switch (sni_brd_type) {
321 case SNI_BRD_PCI_MTOWER:
322 case SNI_BRD_PCI_DESKTOP:
323 case SNI_BRD_PCI_MTOWER_CPLUS:
324 platform_device_register(&pcimt_serial8250_device);
325 platform_device_register(&pcimt_cmos_device);
326 break;
327 }
328
329 return 0;
330 }
331
332 device_initcall(snirm_pcimt_setup_devinit);
333