1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * I2C access for DA9052 PMICs.
4 *
5 * Copyright(c) 2011 Dialog Semiconductor Ltd.
6 *
7 * Author: David Dajun Chen <dchen@diasemi.com>
8 */
9
10 #include <linux/device.h>
11 #include <linux/module.h>
12 #include <linux/input.h>
13 #include <linux/mfd/core.h>
14 #include <linux/i2c.h>
15 #include <linux/err.h>
16 #include <linux/of.h>
17
18 #include <linux/mfd/da9052/da9052.h>
19 #include <linux/mfd/da9052/reg.h>
20
21
22 /* I2C safe register check */
i2c_safe_reg(unsigned char reg)23 static inline bool i2c_safe_reg(unsigned char reg)
24 {
25 switch (reg) {
26 case DA9052_STATUS_A_REG:
27 case DA9052_STATUS_B_REG:
28 case DA9052_STATUS_C_REG:
29 case DA9052_STATUS_D_REG:
30 case DA9052_ADC_RES_L_REG:
31 case DA9052_ADC_RES_H_REG:
32 case DA9052_VDD_RES_REG:
33 case DA9052_ICHG_AV_REG:
34 case DA9052_TBAT_RES_REG:
35 case DA9052_ADCIN4_RES_REG:
36 case DA9052_ADCIN5_RES_REG:
37 case DA9052_ADCIN6_RES_REG:
38 case DA9052_TJUNC_RES_REG:
39 case DA9052_TSI_X_MSB_REG:
40 case DA9052_TSI_Y_MSB_REG:
41 case DA9052_TSI_LSB_REG:
42 case DA9052_TSI_Z_MSB_REG:
43 return true;
44 default:
45 return false;
46 }
47 }
48
49 /*
50 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
51 * gets lockup up or fails to respond following a system reset.
52 * This fix is to follow any read or write with a dummy read to a safe
53 * register.
54 */
da9052_i2c_fix(struct da9052 * da9052,unsigned char reg)55 static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
56 {
57 int val;
58
59 switch (da9052->chip_id) {
60 case DA9052:
61 case DA9053_AA:
62 case DA9053_BA:
63 case DA9053_BB:
64 /* A dummy read to a safe register address. */
65 if (!i2c_safe_reg(reg))
66 return regmap_read(da9052->regmap,
67 DA9052_PARK_REGISTER,
68 &val);
69 break;
70 case DA9053_BC:
71 default:
72 /*
73 * For other chips parking of I2C register
74 * to a safe place is not required.
75 */
76 break;
77 }
78
79 return 0;
80 }
81
82 /*
83 * According to errata item 24, multiwrite mode should be avoided
84 * in order to prevent register data corruption after power-down.
85 */
da9052_i2c_disable_multiwrite(struct da9052 * da9052)86 static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
87 {
88 int reg_val, ret;
89
90 ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, ®_val);
91 if (ret < 0)
92 return ret;
93
94 if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
95 reg_val |= DA9052_CONTROL_B_WRITEMODE;
96 ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
97 reg_val);
98 if (ret < 0)
99 return ret;
100 }
101
102 return 0;
103 }
104
105 static const struct i2c_device_id da9052_i2c_id[] = {
106 {"da9052", DA9052},
107 {"da9053-aa", DA9053_AA},
108 {"da9053-ba", DA9053_BA},
109 {"da9053-bb", DA9053_BB},
110 {"da9053-bc", DA9053_BC},
111 {}
112 };
113 MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);
114
115 #ifdef CONFIG_OF
116 static const struct of_device_id dialog_dt_ids[] = {
117 { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
118 { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
119 { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
120 { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
121 { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
122 { /* sentinel */ }
123 };
124 #endif
125
da9052_i2c_probe(struct i2c_client * client)126 static int da9052_i2c_probe(struct i2c_client *client)
127 {
128 const struct i2c_device_id *id = i2c_client_get_device_id(client);
129 struct da9052 *da9052;
130 int ret;
131
132 da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
133 if (!da9052)
134 return -ENOMEM;
135
136 da9052->dev = &client->dev;
137 da9052->chip_irq = client->irq;
138 da9052->fix_io = da9052_i2c_fix;
139
140 i2c_set_clientdata(client, da9052);
141
142 da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
143 if (IS_ERR(da9052->regmap)) {
144 ret = PTR_ERR(da9052->regmap);
145 dev_err(&client->dev, "Failed to allocate register map: %d\n",
146 ret);
147 return ret;
148 }
149
150 ret = da9052_i2c_disable_multiwrite(da9052);
151 if (ret < 0)
152 return ret;
153
154 #ifdef CONFIG_OF
155 if (!id)
156 id = of_device_get_match_data(&client->dev);
157 #endif
158
159 if (!id) {
160 ret = -ENODEV;
161 dev_err(&client->dev, "id is null.\n");
162 return ret;
163 }
164
165 return da9052_device_init(da9052, id->driver_data);
166 }
167
da9052_i2c_remove(struct i2c_client * client)168 static void da9052_i2c_remove(struct i2c_client *client)
169 {
170 struct da9052 *da9052 = i2c_get_clientdata(client);
171
172 da9052_device_exit(da9052);
173 }
174
175 static struct i2c_driver da9052_i2c_driver = {
176 .probe = da9052_i2c_probe,
177 .remove = da9052_i2c_remove,
178 .id_table = da9052_i2c_id,
179 .driver = {
180 .name = "da9052",
181 #ifdef CONFIG_OF
182 .of_match_table = dialog_dt_ids,
183 #endif
184 },
185 };
186
da9052_i2c_init(void)187 static int __init da9052_i2c_init(void)
188 {
189 int ret;
190
191 ret = i2c_add_driver(&da9052_i2c_driver);
192 if (ret != 0) {
193 pr_err("DA9052 I2C registration failed %d\n", ret);
194 return ret;
195 }
196
197 return 0;
198 }
199 subsys_initcall(da9052_i2c_init);
200
da9052_i2c_exit(void)201 static void __exit da9052_i2c_exit(void)
202 {
203 i2c_del_driver(&da9052_i2c_driver);
204 }
205 module_exit(da9052_i2c_exit);
206
207 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
208 MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
209