1 /*
2 * Provides I2C support for Philips PNX010x/PNX4008 boards.
3 *
4 * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
5 * Vitaly Wool <vwool@ru.mvista.com>
6 *
7 * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
8 * the terms of the GNU General Public License version 2. This program
9 * is licensed "as is" without any warranty of any kind, whether express
10 * or implied.
11 */
12
13 #include <linux/module.h>
14 #include <linux/interrupt.h>
15 #include <linux/ioport.h>
16 #include <linux/delay.h>
17 #include <linux/i2c.h>
18 #include <linux/completion.h>
19 #include <linux/platform_device.h>
20 #include <linux/io.h>
21 #include <linux/err.h>
22 #include <linux/clk.h>
23 #include <linux/slab.h>
24 #include <linux/of.h>
25
26 #define I2C_PNX_TIMEOUT_DEFAULT 10 /* msec */
27 #define I2C_PNX_SPEED_KHZ_DEFAULT 100
28 #define I2C_PNX_REGION_SIZE 0x100
29
30 struct i2c_pnx_mif {
31 int ret; /* Return value */
32 int mode; /* Interface mode */
33 struct completion complete; /* I/O completion */
34 u8 * buf; /* Data buffer */
35 int len; /* Length of data buffer */
36 int order; /* RX Bytes to order via TX */
37 };
38
39 struct i2c_pnx_algo_data {
40 void __iomem *ioaddr;
41 struct i2c_pnx_mif mif;
42 int last;
43 struct clk *clk;
44 struct i2c_adapter adapter;
45 int irq;
46 u32 timeout;
47 };
48
49 enum {
50 mstatus_tdi = 0x00000001,
51 mstatus_afi = 0x00000002,
52 mstatus_nai = 0x00000004,
53 mstatus_drmi = 0x00000008,
54 mstatus_active = 0x00000020,
55 mstatus_scl = 0x00000040,
56 mstatus_sda = 0x00000080,
57 mstatus_rff = 0x00000100,
58 mstatus_rfe = 0x00000200,
59 mstatus_tff = 0x00000400,
60 mstatus_tfe = 0x00000800,
61 };
62
63 enum {
64 mcntrl_tdie = 0x00000001,
65 mcntrl_afie = 0x00000002,
66 mcntrl_naie = 0x00000004,
67 mcntrl_drmie = 0x00000008,
68 mcntrl_drsie = 0x00000010,
69 mcntrl_rffie = 0x00000020,
70 mcntrl_daie = 0x00000040,
71 mcntrl_tffie = 0x00000080,
72 mcntrl_reset = 0x00000100,
73 mcntrl_cdbmode = 0x00000400,
74 };
75
76 enum {
77 rw_bit = 1 << 0,
78 start_bit = 1 << 8,
79 stop_bit = 1 << 9,
80 };
81
82 #define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
83 #define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
84 #define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
85 #define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
86 #define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
87 #define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
88 #define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
89 #define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
90 #define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
91 #define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
92 #define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
93 #define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
94 #define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
95
wait_timeout(struct i2c_pnx_algo_data * data)96 static inline int wait_timeout(struct i2c_pnx_algo_data *data)
97 {
98 long timeout = jiffies_to_msecs(data->timeout);
99 while (timeout > 0 &&
100 (ioread32(I2C_REG_STS(data)) & mstatus_active)) {
101 mdelay(1);
102 timeout--;
103 }
104 return (timeout <= 0);
105 }
106
wait_reset(struct i2c_pnx_algo_data * data)107 static inline int wait_reset(struct i2c_pnx_algo_data *data)
108 {
109 long timeout = jiffies_to_msecs(data->timeout);
110 while (timeout > 0 &&
111 (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
112 mdelay(1);
113 timeout--;
114 }
115 return (timeout <= 0);
116 }
117
118 /**
119 * i2c_pnx_start - start a device
120 * @slave_addr: slave address
121 * @alg_data: pointer to local driver data structure
122 *
123 * Generate a START signal in the desired mode.
124 */
i2c_pnx_start(unsigned char slave_addr,struct i2c_pnx_algo_data * alg_data)125 static int i2c_pnx_start(unsigned char slave_addr,
126 struct i2c_pnx_algo_data *alg_data)
127 {
128 dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
129 slave_addr, alg_data->mif.mode);
130
131 /* Check for 7 bit slave addresses only */
132 if (slave_addr & ~0x7f) {
133 dev_err(&alg_data->adapter.dev,
134 "%s: Invalid slave address %x. Only 7-bit addresses are supported\n",
135 alg_data->adapter.name, slave_addr);
136 return -EINVAL;
137 }
138
139 /* First, make sure bus is idle */
140 if (wait_timeout(alg_data)) {
141 /* Somebody else is monopolizing the bus */
142 dev_err(&alg_data->adapter.dev,
143 "%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
144 alg_data->adapter.name, slave_addr,
145 ioread32(I2C_REG_CTL(alg_data)),
146 ioread32(I2C_REG_STS(alg_data)));
147 return -EBUSY;
148 } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
149 /* Sorry, we lost the bus */
150 dev_err(&alg_data->adapter.dev,
151 "%s: Arbitration failure. Slave addr = %02x\n",
152 alg_data->adapter.name, slave_addr);
153 return -EIO;
154 }
155
156 /*
157 * OK, I2C is enabled and we have the bus.
158 * Clear the current TDI and AFI status flags.
159 */
160 iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
161 I2C_REG_STS(alg_data));
162
163 dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
164 (slave_addr << 1) | start_bit | alg_data->mif.mode);
165
166 /* Write the slave address, START bit and R/W bit */
167 iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
168 I2C_REG_TX(alg_data));
169
170 dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
171
172 return 0;
173 }
174
175 /**
176 * i2c_pnx_stop - stop a device
177 * @alg_data: pointer to local driver data structure
178 *
179 * Generate a STOP signal to terminate the master transaction.
180 */
i2c_pnx_stop(struct i2c_pnx_algo_data * alg_data)181 static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
182 {
183 /* Only 1 msec max timeout due to interrupt context */
184 long timeout = 1000;
185
186 dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
187 __func__, ioread32(I2C_REG_STS(alg_data)));
188
189 /* Write a STOP bit to TX FIFO */
190 iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
191
192 /* Wait until the STOP is seen. */
193 while (timeout > 0 &&
194 (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
195 /* may be called from interrupt context */
196 udelay(1);
197 timeout--;
198 }
199
200 dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
201 __func__, ioread32(I2C_REG_STS(alg_data)));
202 }
203
204 /**
205 * i2c_pnx_master_xmit - transmit data to slave
206 * @alg_data: pointer to local driver data structure
207 *
208 * Sends one byte of data to the slave
209 */
i2c_pnx_master_xmit(struct i2c_pnx_algo_data * alg_data)210 static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
211 {
212 u32 val;
213
214 dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
215 __func__, ioread32(I2C_REG_STS(alg_data)));
216
217 if (alg_data->mif.len > 0) {
218 /* We still have something to talk about... */
219 val = *alg_data->mif.buf++;
220
221 if (alg_data->mif.len == 1)
222 val |= stop_bit;
223
224 alg_data->mif.len--;
225 iowrite32(val, I2C_REG_TX(alg_data));
226
227 dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n",
228 __func__, val, alg_data->mif.len + 1);
229
230 if (alg_data->mif.len == 0) {
231 if (alg_data->last) {
232 /* Wait until the STOP is seen. */
233 if (wait_timeout(alg_data))
234 dev_err(&alg_data->adapter.dev,
235 "The bus is still active after timeout\n");
236 }
237 /* Disable master interrupts */
238 iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
239 ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
240 I2C_REG_CTL(alg_data));
241
242 dev_dbg(&alg_data->adapter.dev,
243 "%s(): Waking up xfer routine.\n",
244 __func__);
245
246 complete(&alg_data->mif.complete);
247 }
248 } else if (alg_data->mif.len == 0) {
249 /* zero-sized transfer */
250 i2c_pnx_stop(alg_data);
251
252 /* Disable master interrupts. */
253 iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
254 ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
255 I2C_REG_CTL(alg_data));
256
257 dev_dbg(&alg_data->adapter.dev,
258 "%s(): Waking up xfer routine after zero-xfer.\n",
259 __func__);
260
261 complete(&alg_data->mif.complete);
262 }
263
264 dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
265 __func__, ioread32(I2C_REG_STS(alg_data)));
266
267 return 0;
268 }
269
270 /**
271 * i2c_pnx_master_rcv - receive data from slave
272 * @alg_data: pointer to local driver data structure
273 *
274 * Reads one byte data from the slave
275 */
i2c_pnx_master_rcv(struct i2c_pnx_algo_data * alg_data)276 static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
277 {
278 unsigned int val = 0;
279 u32 ctl = 0;
280
281 dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
282 __func__, ioread32(I2C_REG_STS(alg_data)));
283
284 /* Check, whether there is already data,
285 * or we didn't 'ask' for it yet.
286 */
287 if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
288 /* 'Asking' is done asynchronously, e.g. dummy TX of several
289 * bytes is done before the first actual RX arrives in FIFO.
290 * Therefore, ordered bytes (via TX) are counted separately.
291 */
292 if (alg_data->mif.order) {
293 dev_dbg(&alg_data->adapter.dev,
294 "%s(): Write dummy data to fill Rx-fifo...\n",
295 __func__);
296
297 if (alg_data->mif.order == 1) {
298 /* Last byte, do not acknowledge next rcv. */
299 val |= stop_bit;
300
301 /*
302 * Enable interrupt RFDAIE (data in Rx fifo),
303 * and disable DRMIE (need data for Tx)
304 */
305 ctl = ioread32(I2C_REG_CTL(alg_data));
306 ctl |= mcntrl_rffie | mcntrl_daie;
307 ctl &= ~mcntrl_drmie;
308 iowrite32(ctl, I2C_REG_CTL(alg_data));
309 }
310
311 /*
312 * Now we'll 'ask' for data:
313 * For each byte we want to receive, we must
314 * write a (dummy) byte to the Tx-FIFO.
315 */
316 iowrite32(val, I2C_REG_TX(alg_data));
317 alg_data->mif.order--;
318 }
319 return 0;
320 }
321
322 /* Handle data. */
323 if (alg_data->mif.len > 0) {
324 val = ioread32(I2C_REG_RX(alg_data));
325 *alg_data->mif.buf++ = (u8) (val & 0xff);
326 dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n",
327 __func__, val, alg_data->mif.len);
328
329 alg_data->mif.len--;
330 if (alg_data->mif.len == 0) {
331 if (alg_data->last)
332 /* Wait until the STOP is seen. */
333 if (wait_timeout(alg_data))
334 dev_err(&alg_data->adapter.dev,
335 "The bus is still active after timeout\n");
336
337 /* Disable master interrupts */
338 ctl = ioread32(I2C_REG_CTL(alg_data));
339 ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
340 mcntrl_drmie | mcntrl_daie);
341 iowrite32(ctl, I2C_REG_CTL(alg_data));
342
343 complete(&alg_data->mif.complete);
344 }
345 }
346
347 dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
348 __func__, ioread32(I2C_REG_STS(alg_data)));
349
350 return 0;
351 }
352
i2c_pnx_interrupt(int irq,void * dev_id)353 static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
354 {
355 struct i2c_pnx_algo_data *alg_data = dev_id;
356 u32 stat, ctl;
357
358 dev_dbg(&alg_data->adapter.dev,
359 "%s(): mstat = %x mctrl = %x, mode = %d\n",
360 __func__,
361 ioread32(I2C_REG_STS(alg_data)),
362 ioread32(I2C_REG_CTL(alg_data)),
363 alg_data->mif.mode);
364 stat = ioread32(I2C_REG_STS(alg_data));
365
366 /* let's see what kind of event this is */
367 if (stat & mstatus_afi) {
368 /* We lost arbitration in the midst of a transfer */
369 alg_data->mif.ret = -EIO;
370
371 /* Disable master interrupts. */
372 ctl = ioread32(I2C_REG_CTL(alg_data));
373 ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
374 mcntrl_drmie);
375 iowrite32(ctl, I2C_REG_CTL(alg_data));
376
377 complete(&alg_data->mif.complete);
378 } else if (stat & mstatus_nai) {
379 /* Slave did not acknowledge, generate a STOP */
380 dev_dbg(&alg_data->adapter.dev,
381 "%s(): Slave did not acknowledge, generating a STOP.\n",
382 __func__);
383 i2c_pnx_stop(alg_data);
384
385 /* Disable master interrupts. */
386 ctl = ioread32(I2C_REG_CTL(alg_data));
387 ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
388 mcntrl_drmie);
389 iowrite32(ctl, I2C_REG_CTL(alg_data));
390
391 /* Our return value. */
392 alg_data->mif.ret = -EIO;
393
394 complete(&alg_data->mif.complete);
395 } else {
396 /*
397 * Two options:
398 * - Master Tx needs data.
399 * - There is data in the Rx-fifo
400 * The latter is only the case if we have requested for data,
401 * via a dummy write. (See 'i2c_pnx_master_rcv'.)
402 * We therefore check, as a sanity check, whether that interrupt
403 * has been enabled.
404 */
405 if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
406 if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
407 i2c_pnx_master_xmit(alg_data);
408 } else if (alg_data->mif.mode == I2C_SMBUS_READ) {
409 i2c_pnx_master_rcv(alg_data);
410 }
411 }
412 }
413
414 /* Clear TDI and AFI bits */
415 stat = ioread32(I2C_REG_STS(alg_data));
416 iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
417
418 dev_dbg(&alg_data->adapter.dev,
419 "%s(): exiting, stat = %x ctrl = %x.\n",
420 __func__, ioread32(I2C_REG_STS(alg_data)),
421 ioread32(I2C_REG_CTL(alg_data)));
422
423 return IRQ_HANDLED;
424 }
425
i2c_pnx_timeout(struct i2c_pnx_algo_data * alg_data)426 static void i2c_pnx_timeout(struct i2c_pnx_algo_data *alg_data)
427 {
428 u32 ctl;
429
430 dev_err(&alg_data->adapter.dev,
431 "Master timed out. stat = %04x, cntrl = %04x. Resetting master...\n",
432 ioread32(I2C_REG_STS(alg_data)),
433 ioread32(I2C_REG_CTL(alg_data)));
434
435 /* Reset master and disable interrupts */
436 ctl = ioread32(I2C_REG_CTL(alg_data));
437 ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
438 iowrite32(ctl, I2C_REG_CTL(alg_data));
439
440 ctl |= mcntrl_reset;
441 iowrite32(ctl, I2C_REG_CTL(alg_data));
442 wait_reset(alg_data);
443 alg_data->mif.ret = -EIO;
444 }
445
bus_reset_if_active(struct i2c_pnx_algo_data * alg_data)446 static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
447 {
448 u32 stat;
449
450 if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
451 dev_err(&alg_data->adapter.dev,
452 "%s: Bus is still active after xfer. Reset it...\n",
453 alg_data->adapter.name);
454 iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
455 I2C_REG_CTL(alg_data));
456 wait_reset(alg_data);
457 } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
458 /* If there is data in the fifo's after transfer,
459 * flush fifo's by reset.
460 */
461 iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
462 I2C_REG_CTL(alg_data));
463 wait_reset(alg_data);
464 } else if (stat & mstatus_nai) {
465 iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
466 I2C_REG_CTL(alg_data));
467 wait_reset(alg_data);
468 }
469 }
470
471 /**
472 * i2c_pnx_xfer - generic transfer entry point
473 * @adap: pointer to I2C adapter structure
474 * @msgs: array of messages
475 * @num: number of messages
476 *
477 * Initiates the transfer
478 */
479 static int
i2c_pnx_xfer(struct i2c_adapter * adap,struct i2c_msg * msgs,int num)480 i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
481 {
482 struct i2c_msg *pmsg;
483 int rc = 0, completed = 0, i;
484 struct i2c_pnx_algo_data *alg_data = adap->algo_data;
485 unsigned long time_left;
486 u32 stat;
487
488 dev_dbg(&alg_data->adapter.dev,
489 "%s(): entering: %d messages, stat = %04x.\n",
490 __func__, num, ioread32(I2C_REG_STS(alg_data)));
491
492 bus_reset_if_active(alg_data);
493
494 /* Process transactions in a loop. */
495 for (i = 0; rc >= 0 && i < num; i++) {
496 u8 addr;
497
498 pmsg = &msgs[i];
499 addr = pmsg->addr;
500
501 if (pmsg->flags & I2C_M_TEN) {
502 dev_err(&alg_data->adapter.dev,
503 "%s: 10 bits addr not supported!\n",
504 alg_data->adapter.name);
505 rc = -EINVAL;
506 break;
507 }
508
509 alg_data->mif.buf = pmsg->buf;
510 alg_data->mif.len = pmsg->len;
511 alg_data->mif.order = pmsg->len;
512 alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
513 I2C_SMBUS_READ : I2C_SMBUS_WRITE;
514 alg_data->mif.ret = 0;
515 alg_data->last = (i == num - 1);
516
517 dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n",
518 __func__, alg_data->mif.mode, alg_data->mif.len);
519
520
521 /* initialize the completion var */
522 init_completion(&alg_data->mif.complete);
523
524 /* Enable master interrupt */
525 iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
526 mcntrl_naie | mcntrl_drmie,
527 I2C_REG_CTL(alg_data));
528
529 /* Put start-code and slave-address on the bus. */
530 rc = i2c_pnx_start(addr, alg_data);
531 if (rc < 0)
532 break;
533
534 /* Wait for completion */
535 time_left = wait_for_completion_timeout(&alg_data->mif.complete,
536 alg_data->timeout);
537 if (time_left == 0)
538 i2c_pnx_timeout(alg_data);
539
540 if (!(rc = alg_data->mif.ret))
541 completed++;
542 dev_dbg(&alg_data->adapter.dev,
543 "%s(): Complete, return code = %d.\n",
544 __func__, rc);
545
546 /* Clear TDI and AFI bits in case they are set. */
547 if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
548 dev_dbg(&alg_data->adapter.dev,
549 "%s: TDI still set... clearing now.\n",
550 alg_data->adapter.name);
551 iowrite32(stat, I2C_REG_STS(alg_data));
552 }
553 if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
554 dev_dbg(&alg_data->adapter.dev,
555 "%s: AFI still set... clearing now.\n",
556 alg_data->adapter.name);
557 iowrite32(stat, I2C_REG_STS(alg_data));
558 }
559 }
560
561 bus_reset_if_active(alg_data);
562
563 /* Cleanup to be sure... */
564 alg_data->mif.buf = NULL;
565 alg_data->mif.len = 0;
566 alg_data->mif.order = 0;
567
568 dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
569 __func__, ioread32(I2C_REG_STS(alg_data)));
570
571 if (completed != num)
572 return ((rc < 0) ? rc : -EREMOTEIO);
573
574 return num;
575 }
576
i2c_pnx_func(struct i2c_adapter * adapter)577 static u32 i2c_pnx_func(struct i2c_adapter *adapter)
578 {
579 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
580 }
581
582 static const struct i2c_algorithm pnx_algorithm = {
583 .master_xfer = i2c_pnx_xfer,
584 .functionality = i2c_pnx_func,
585 };
586
i2c_pnx_controller_suspend(struct device * dev)587 static int i2c_pnx_controller_suspend(struct device *dev)
588 {
589 struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
590
591 clk_disable_unprepare(alg_data->clk);
592
593 return 0;
594 }
595
i2c_pnx_controller_resume(struct device * dev)596 static int i2c_pnx_controller_resume(struct device *dev)
597 {
598 struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
599
600 return clk_prepare_enable(alg_data->clk);
601 }
602
603 static DEFINE_SIMPLE_DEV_PM_OPS(i2c_pnx_pm,
604 i2c_pnx_controller_suspend,
605 i2c_pnx_controller_resume);
606
i2c_pnx_probe(struct platform_device * pdev)607 static int i2c_pnx_probe(struct platform_device *pdev)
608 {
609 unsigned long tmp;
610 int ret = 0;
611 struct i2c_pnx_algo_data *alg_data;
612 unsigned long freq;
613 struct resource *res;
614 u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000;
615
616 alg_data = devm_kzalloc(&pdev->dev, sizeof(*alg_data), GFP_KERNEL);
617 if (!alg_data)
618 return -ENOMEM;
619
620 platform_set_drvdata(pdev, alg_data);
621
622 alg_data->adapter.dev.parent = &pdev->dev;
623 alg_data->adapter.algo = &pnx_algorithm;
624 alg_data->adapter.algo_data = alg_data;
625 alg_data->adapter.nr = pdev->id;
626
627 alg_data->timeout = msecs_to_jiffies(I2C_PNX_TIMEOUT_DEFAULT);
628 if (alg_data->timeout <= 1)
629 alg_data->timeout = 2;
630
631 #ifdef CONFIG_OF
632 alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node);
633 if (pdev->dev.of_node) {
634 of_property_read_u32(pdev->dev.of_node, "clock-frequency",
635 &speed);
636 /*
637 * At this point, it is planned to add an OF timeout property.
638 * As soon as there is a consensus about how to call and handle
639 * this, sth. like the following can be put here:
640 *
641 * of_property_read_u32(pdev->dev.of_node, "timeout",
642 * &alg_data->timeout);
643 */
644 }
645 #endif
646 alg_data->clk = devm_clk_get(&pdev->dev, NULL);
647 if (IS_ERR(alg_data->clk))
648 return PTR_ERR(alg_data->clk);
649
650 snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name),
651 "%s", pdev->name);
652
653 /* Register I/O resource */
654 alg_data->ioaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
655 if (IS_ERR(alg_data->ioaddr))
656 return PTR_ERR(alg_data->ioaddr);
657
658 ret = clk_prepare_enable(alg_data->clk);
659 if (ret)
660 return ret;
661
662 freq = clk_get_rate(alg_data->clk);
663
664 /*
665 * Clock Divisor High This value is the number of system clocks
666 * the serial clock (SCL) will be high.
667 * For example, if the system clock period is 50 ns and the maximum
668 * desired serial period is 10000 ns (100 kHz), then CLKHI would be
669 * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
670 * programmed into CLKHI will vary from this slightly due to
671 * variations in the output pad's rise and fall times as well as
672 * the deglitching filter length.
673 */
674
675 tmp = (freq / speed) / 2 - 2;
676 if (tmp > 0x3FF)
677 tmp = 0x3FF;
678 iowrite32(tmp, I2C_REG_CKH(alg_data));
679 iowrite32(tmp, I2C_REG_CKL(alg_data));
680
681 iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
682 if (wait_reset(alg_data)) {
683 ret = -ENODEV;
684 goto out_clock;
685 }
686 init_completion(&alg_data->mif.complete);
687
688 alg_data->irq = platform_get_irq(pdev, 0);
689 if (alg_data->irq < 0) {
690 ret = alg_data->irq;
691 goto out_clock;
692 }
693 ret = devm_request_irq(&pdev->dev, alg_data->irq, i2c_pnx_interrupt,
694 0, pdev->name, alg_data);
695 if (ret)
696 goto out_clock;
697
698 /* Register this adapter with the I2C subsystem */
699 ret = i2c_add_numbered_adapter(&alg_data->adapter);
700 if (ret < 0)
701 goto out_clock;
702
703 dev_dbg(&pdev->dev, "%s: Master at %pap, irq %d.\n",
704 alg_data->adapter.name, &res->start, alg_data->irq);
705
706 return 0;
707
708 out_clock:
709 clk_disable_unprepare(alg_data->clk);
710 return ret;
711 }
712
i2c_pnx_remove(struct platform_device * pdev)713 static void i2c_pnx_remove(struct platform_device *pdev)
714 {
715 struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
716
717 i2c_del_adapter(&alg_data->adapter);
718 clk_disable_unprepare(alg_data->clk);
719 }
720
721 #ifdef CONFIG_OF
722 static const struct of_device_id i2c_pnx_of_match[] = {
723 { .compatible = "nxp,pnx-i2c" },
724 { }
725 };
726 MODULE_DEVICE_TABLE(of, i2c_pnx_of_match);
727 #endif
728
729 static struct platform_driver i2c_pnx_driver = {
730 .driver = {
731 .name = "pnx-i2c",
732 .of_match_table = of_match_ptr(i2c_pnx_of_match),
733 .pm = pm_sleep_ptr(&i2c_pnx_pm),
734 },
735 .probe = i2c_pnx_probe,
736 .remove = i2c_pnx_remove,
737 };
738
i2c_adap_pnx_init(void)739 static int __init i2c_adap_pnx_init(void)
740 {
741 return platform_driver_register(&i2c_pnx_driver);
742 }
743
i2c_adap_pnx_exit(void)744 static void __exit i2c_adap_pnx_exit(void)
745 {
746 platform_driver_unregister(&i2c_pnx_driver);
747 }
748
749 MODULE_AUTHOR("Vitaly Wool");
750 MODULE_AUTHOR("Dennis Kovalev <source@mvista.com>");
751 MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
752 MODULE_LICENSE("GPL");
753 MODULE_ALIAS("platform:pnx-i2c");
754
755 /* We need to make sure I2C is initialized before USB */
756 subsys_initcall(i2c_adap_pnx_init);
757 module_exit(i2c_adap_pnx_exit);
758