xref: /linux/drivers/gpio/gpio-latch.c (revision 500920fa76819b4909a32081e153bce80ce74824)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * GPIO latch driver
4  *
5  *  Copyright (C) 2022 Sascha Hauer <s.hauer@pengutronix.de>
6  *
7  * This driver implements a GPIO (or better GPO as there is no input)
8  * multiplexer based on latches like this:
9  *
10  * CLK0 ----------------------.        ,--------.
11  * CLK1 -------------------.  `--------|>    #0 |
12  *                         |           |        |
13  * OUT0 ----------------+--|-----------|D0    Q0|-----|<
14  * OUT1 --------------+-|--|-----------|D1    Q1|-----|<
15  * OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
16  * OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
17  * OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
18  * OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
19  * OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
20  * OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
21  *        | | | | | | | |  |           `--------'
22  *        | | | | | | | |  |
23  *        | | | | | | | |  |           ,--------.
24  *        | | | | | | | |  `-----------|>    #1 |
25  *        | | | | | | | |              |        |
26  *        | | | | | | | `--------------|D0    Q0|-----|<
27  *        | | | | | | `----------------|D1    Q1|-----|<
28  *        | | | | | `------------------|D2    Q2|-----|<
29  *        | | | | `--------------------|D3    Q3|-----|<
30  *        | | | `----------------------|D4    Q4|-----|<
31  *        | | `------------------------|D5    Q5|-----|<
32  *        | `--------------------------|D6    Q6|-----|<
33  *        `----------------------------|D7    Q7|-----|<
34  *                                     `--------'
35  *
36  * The above is just an example. The actual number of number of latches and
37  * the number of inputs per latch is derived from the number of GPIOs given
38  * in the corresponding device tree properties.
39  */
40 
41 #include <linux/cleanup.h>
42 #include <linux/err.h>
43 #include <linux/gpio/consumer.h>
44 #include <linux/gpio/driver.h>
45 #include <linux/module.h>
46 #include <linux/mod_devicetable.h>
47 #include <linux/platform_device.h>
48 #include <linux/property.h>
49 #include <linux/delay.h>
50 
51 struct gpio_latch_priv {
52 	struct gpio_chip gc;
53 	struct gpio_descs *clk_gpios;
54 	struct gpio_descs *latched_gpios;
55 	int n_latched_gpios;
56 	unsigned int setup_duration_ns;
57 	unsigned int clock_duration_ns;
58 	unsigned long *shadow;
59 	/*
60 	 * Depending on whether any of the underlying GPIOs may sleep we either
61 	 * use a mutex or a spinlock to protect our shadow map.
62 	 */
63 	union {
64 		struct mutex mutex; /* protects @shadow */
65 		spinlock_t spinlock; /* protects @shadow */
66 	};
67 };
68 
69 static int gpio_latch_get_direction(struct gpio_chip *gc, unsigned int offset)
70 {
71 	return GPIO_LINE_DIRECTION_OUT;
72 }
73 
74 static int gpio_latch_set_unlocked(struct gpio_latch_priv *priv,
75 				   int (*set)(struct gpio_desc *desc, int value),
76 				   unsigned int offset, bool val)
77 {
78 	int latch = offset / priv->n_latched_gpios, i, ret;
79 
80 	assign_bit(offset, priv->shadow, val);
81 
82 	for (i = 0; i < priv->n_latched_gpios; i++) {
83 		ret = set(priv->latched_gpios->desc[i],
84 			  test_bit(latch * priv->n_latched_gpios + i,
85 				   priv->shadow));
86 		if (ret)
87 			return ret;
88 	}
89 
90 	ndelay(priv->setup_duration_ns);
91 	set(priv->clk_gpios->desc[latch], 1);
92 	ndelay(priv->clock_duration_ns);
93 	set(priv->clk_gpios->desc[latch], 0);
94 
95 	return 0;
96 }
97 
98 static int gpio_latch_set(struct gpio_chip *gc, unsigned int offset, int val)
99 {
100 	struct gpio_latch_priv *priv = gpiochip_get_data(gc);
101 
102 	guard(spinlock_irqsave)(&priv->spinlock);
103 
104 	return gpio_latch_set_unlocked(priv, gpiod_set_value, offset, val);
105 }
106 
107 static int gpio_latch_set_can_sleep(struct gpio_chip *gc, unsigned int offset, int val)
108 {
109 	struct gpio_latch_priv *priv = gpiochip_get_data(gc);
110 
111 	guard(mutex)(&priv->mutex);
112 
113 	return gpio_latch_set_unlocked(priv, gpiod_set_value_cansleep, offset, val);
114 }
115 
116 static bool gpio_latch_can_sleep(struct gpio_latch_priv *priv, unsigned int n_latches)
117 {
118 	int i;
119 
120 	for (i = 0; i < n_latches; i++)
121 		if (gpiod_cansleep(priv->clk_gpios->desc[i]))
122 			return true;
123 
124 	for (i = 0; i < priv->n_latched_gpios; i++)
125 		if (gpiod_cansleep(priv->latched_gpios->desc[i]))
126 			return true;
127 
128 	return false;
129 }
130 
131 /*
132  * Some value which is still acceptable to delay in atomic context.
133  * If we need to go higher we might have to switch to usleep_range(),
134  * but that cannot ne used in atomic context and the driver would have
135  * to be adjusted to support that.
136  */
137 #define DURATION_NS_MAX 5000
138 
139 static int gpio_latch_probe(struct platform_device *pdev)
140 {
141 	struct device *dev = &pdev->dev;
142 	struct gpio_latch_priv *priv;
143 	unsigned int n_latches;
144 
145 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
146 	if (!priv)
147 		return -ENOMEM;
148 
149 	priv->clk_gpios = devm_gpiod_get_array(dev, "clk", GPIOD_OUT_LOW);
150 	if (IS_ERR(priv->clk_gpios))
151 		return PTR_ERR(priv->clk_gpios);
152 
153 	priv->latched_gpios = devm_gpiod_get_array(dev, "latched", GPIOD_OUT_LOW);
154 	if (IS_ERR(priv->latched_gpios))
155 		return PTR_ERR(priv->latched_gpios);
156 
157 	n_latches = priv->clk_gpios->ndescs;
158 	priv->n_latched_gpios = priv->latched_gpios->ndescs;
159 
160 	priv->shadow = devm_bitmap_zalloc(dev, n_latches * priv->n_latched_gpios,
161 					  GFP_KERNEL);
162 	if (!priv->shadow)
163 		return -ENOMEM;
164 
165 	if (gpio_latch_can_sleep(priv, n_latches)) {
166 		priv->gc.can_sleep = true;
167 		priv->gc.set = gpio_latch_set_can_sleep;
168 		mutex_init(&priv->mutex);
169 	} else {
170 		priv->gc.can_sleep = false;
171 		priv->gc.set = gpio_latch_set;
172 		spin_lock_init(&priv->spinlock);
173 	}
174 
175 	device_property_read_u32(dev, "setup-duration-ns",
176 				 &priv->setup_duration_ns);
177 	if (priv->setup_duration_ns > DURATION_NS_MAX) {
178 		dev_warn(dev, "setup-duration-ns too high, limit to %d\n",
179 			 DURATION_NS_MAX);
180 		priv->setup_duration_ns = DURATION_NS_MAX;
181 	}
182 
183 	device_property_read_u32(dev, "clock-duration-ns",
184 				 &priv->clock_duration_ns);
185 	if (priv->clock_duration_ns > DURATION_NS_MAX) {
186 		dev_warn(dev, "clock-duration-ns too high, limit to %d\n",
187 			 DURATION_NS_MAX);
188 		priv->clock_duration_ns = DURATION_NS_MAX;
189 	}
190 
191 	priv->gc.get_direction = gpio_latch_get_direction;
192 	priv->gc.ngpio = n_latches * priv->n_latched_gpios;
193 	priv->gc.owner = THIS_MODULE;
194 	priv->gc.base = -1;
195 	priv->gc.parent = dev;
196 
197 	platform_set_drvdata(pdev, priv);
198 
199 	return devm_gpiochip_add_data(dev, &priv->gc, priv);
200 }
201 
202 static const struct of_device_id gpio_latch_ids[] = {
203 	{
204 		.compatible = "gpio-latch",
205 	},
206 	{ /* sentinel */ }
207 };
208 MODULE_DEVICE_TABLE(of, gpio_latch_ids);
209 
210 static struct platform_driver gpio_latch_driver = {
211 	.driver	= {
212 		.name		= "gpio-latch",
213 		.of_match_table	= gpio_latch_ids,
214 	},
215 	.probe	= gpio_latch_probe,
216 };
217 module_platform_driver(gpio_latch_driver);
218 
219 MODULE_LICENSE("GPL v2");
220 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
221 MODULE_DESCRIPTION("GPIO latch driver");
222