1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Flash memory interface rev.5 driver for the Intel
4 * Flash chips used on the NetWinder.
5 *
6 * 20/08/2000 RMK use __ioremap to map flash into virtual memory
7 * make a few more places use "volatile"
8 * 22/05/2001 RMK - Lock read against write
9 * - merge printk level changes (with mods) from Alan Cox.
10 * - use *ppos as the file position, not file->f_pos.
11 * - fix check for out of range pos and r/w size
12 *
13 * Please note that we are tampering with the only flash chip in the
14 * machine, which contains the bootup code. We therefore have the
15 * power to convert these machines into doorstops...
16 */
17
18 #include <linux/module.h>
19 #include <linux/types.h>
20 #include <linux/fs.h>
21 #include <linux/errno.h>
22 #include <linux/mm.h>
23 #include <linux/delay.h>
24 #include <linux/proc_fs.h>
25 #include <linux/miscdevice.h>
26 #include <linux/spinlock.h>
27 #include <linux/rwsem.h>
28 #include <linux/init.h>
29 #include <linux/mutex.h>
30 #include <linux/jiffies.h>
31
32 #include <asm/hardware/dec21285.h>
33 #include <asm/io.h>
34 #include <asm/mach-types.h>
35 #include <linux/uaccess.h>
36
37 /*****************************************************************************/
38 #include <asm/nwflash.h>
39
40 #define NWFLASH_VERSION "6.4"
41
42 static DEFINE_MUTEX(flash_mutex);
43 static void kick_open(void);
44 static int get_flash_id(void);
45 static int erase_block(int nBlock);
46 static int write_block(unsigned long p, const char __user *buf, int count);
47
48 #define KFLASH_SIZE 1024*1024 //1 Meg
49 #define KFLASH_SIZE4 4*1024*1024 //4 Meg
50 #define KFLASH_ID 0x89A6 //Intel flash
51 #define KFLASH_ID4 0xB0D4 //Intel flash 4Meg
52
53 static bool flashdebug; //if set - we will display progress msgs
54
55 static int gbWriteEnable;
56 static int gbWriteBase64Enable;
57 static volatile unsigned char *FLASH_BASE;
58 static int gbFlashSize = KFLASH_SIZE;
59 static DEFINE_MUTEX(nwflash_mutex);
60
get_flash_id(void)61 static int get_flash_id(void)
62 {
63 volatile unsigned int c1, c2;
64
65 /*
66 * try to get flash chip ID
67 */
68 kick_open();
69 c2 = inb(0x80);
70 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x90;
71 udelay(15);
72 c1 = *(volatile unsigned char *) FLASH_BASE;
73 c2 = inb(0x80);
74
75 /*
76 * on 4 Meg flash the second byte is actually at offset 2...
77 */
78 if (c1 == 0xB0)
79 c2 = *(volatile unsigned char *) (FLASH_BASE + 2);
80 else
81 c2 = *(volatile unsigned char *) (FLASH_BASE + 1);
82
83 c2 += (c1 << 8);
84
85 /*
86 * set it back to read mode
87 */
88 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
89
90 if (c2 == KFLASH_ID4)
91 gbFlashSize = KFLASH_SIZE4;
92
93 return c2;
94 }
95
flash_ioctl(struct file * filep,unsigned int cmd,unsigned long arg)96 static long flash_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
97 {
98 mutex_lock(&flash_mutex);
99 switch (cmd) {
100 case CMD_WRITE_DISABLE:
101 gbWriteBase64Enable = 0;
102 gbWriteEnable = 0;
103 break;
104
105 case CMD_WRITE_ENABLE:
106 gbWriteEnable = 1;
107 break;
108
109 case CMD_WRITE_BASE64K_ENABLE:
110 gbWriteBase64Enable = 1;
111 break;
112
113 default:
114 gbWriteBase64Enable = 0;
115 gbWriteEnable = 0;
116 mutex_unlock(&flash_mutex);
117 return -EINVAL;
118 }
119 mutex_unlock(&flash_mutex);
120 return 0;
121 }
122
flash_read(struct file * file,char __user * buf,size_t size,loff_t * ppos)123 static ssize_t flash_read(struct file *file, char __user *buf, size_t size,
124 loff_t *ppos)
125 {
126 ssize_t ret;
127
128 if (flashdebug)
129 printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, "
130 "buffer=%p, count=0x%zx.\n", *ppos, buf, size);
131 /*
132 * We now lock against reads and writes. --rmk
133 */
134 if (mutex_lock_interruptible(&nwflash_mutex))
135 return -ERESTARTSYS;
136
137 ret = simple_read_from_buffer(buf, size, ppos, (void *)FLASH_BASE, gbFlashSize);
138 mutex_unlock(&nwflash_mutex);
139
140 return ret;
141 }
142
flash_write(struct file * file,const char __user * buf,size_t size,loff_t * ppos)143 static ssize_t flash_write(struct file *file, const char __user *buf,
144 size_t size, loff_t * ppos)
145 {
146 unsigned long p = *ppos;
147 unsigned int count = size;
148 int written;
149 int nBlock, temp, rc;
150 int i, j;
151
152 if (flashdebug)
153 printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n",
154 p, buf, count);
155
156 if (!gbWriteEnable)
157 return -EINVAL;
158
159 if (p < 64 * 1024 && (!gbWriteBase64Enable))
160 return -EINVAL;
161
162 /*
163 * check for out of range pos or count
164 */
165 if (p >= gbFlashSize)
166 return count ? -ENXIO : 0;
167
168 if (count > gbFlashSize - p)
169 count = gbFlashSize - p;
170
171 if (!access_ok(buf, count))
172 return -EFAULT;
173
174 /*
175 * We now lock against reads and writes. --rmk
176 */
177 if (mutex_lock_interruptible(&nwflash_mutex))
178 return -ERESTARTSYS;
179
180 written = 0;
181
182 nBlock = (int) p >> 16; //block # of 64K bytes
183
184 /*
185 * # of 64K blocks to erase and write
186 */
187 temp = ((int) (p + count) >> 16) - nBlock + 1;
188
189 /*
190 * write ends at exactly 64k boundary?
191 */
192 if (((int) (p + count) & 0xFFFF) == 0)
193 temp -= 1;
194
195 if (flashdebug)
196 printk(KERN_DEBUG "flash_write: writing %d block(s) "
197 "starting at %d.\n", temp, nBlock);
198
199 for (; temp; temp--, nBlock++) {
200 if (flashdebug)
201 printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock);
202
203 /*
204 * first we have to erase the block(s), where we will write...
205 */
206 i = 0;
207 j = 0;
208 RetryBlock:
209 do {
210 rc = erase_block(nBlock);
211 i++;
212 } while (rc && i < 10);
213
214 if (rc) {
215 printk(KERN_ERR "flash_write: erase error %x\n", rc);
216 break;
217 }
218 if (flashdebug)
219 printk(KERN_DEBUG "flash_write: writing offset %lX, "
220 "from buf %p, bytes left %X.\n", p, buf,
221 count - written);
222
223 /*
224 * write_block will limit write to space left in this block
225 */
226 rc = write_block(p, buf, count - written);
227 j++;
228
229 /*
230 * if somehow write verify failed? Can't happen??
231 */
232 if (!rc) {
233 /*
234 * retry up to 10 times
235 */
236 if (j < 10)
237 goto RetryBlock;
238 else
239 /*
240 * else quit with error...
241 */
242 rc = -1;
243
244 }
245 if (rc < 0) {
246 printk(KERN_ERR "flash_write: write error %X\n", rc);
247 break;
248 }
249 p += rc;
250 buf += rc;
251 written += rc;
252 *ppos += rc;
253
254 if (flashdebug)
255 printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
256 }
257
258 mutex_unlock(&nwflash_mutex);
259
260 return written;
261 }
262
263
264 /*
265 * The memory devices use the full 32/64 bits of the offset, and so we cannot
266 * check against negative addresses: they are ok. The return value is weird,
267 * though, in that case (0).
268 *
269 * also note that seeking relative to the "end of file" isn't supported:
270 * it has no meaning, so it returns -EINVAL.
271 */
flash_llseek(struct file * file,loff_t offset,int orig)272 static loff_t flash_llseek(struct file *file, loff_t offset, int orig)
273 {
274 loff_t ret;
275
276 mutex_lock(&flash_mutex);
277 if (flashdebug)
278 printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n",
279 (unsigned int) offset, orig);
280
281 ret = no_seek_end_llseek_size(file, offset, orig, gbFlashSize);
282 mutex_unlock(&flash_mutex);
283 return ret;
284 }
285
286
287 /*
288 * assume that main Write routine did the parameter checking...
289 * so just go ahead and erase, what requested!
290 */
291
erase_block(int nBlock)292 static int erase_block(int nBlock)
293 {
294 volatile unsigned int c1;
295 volatile unsigned char *pWritePtr;
296 unsigned long timeout;
297 int temp, temp1;
298
299 /*
300 * reset footbridge to the correct offset 0 (...0..3)
301 */
302 *CSR_ROMWRITEREG = 0;
303
304 /*
305 * dummy ROM read
306 */
307 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
308
309 kick_open();
310 /*
311 * reset status if old errors
312 */
313 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
314
315 /*
316 * erase a block...
317 * aim at the middle of a current block...
318 */
319 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + 0x8000 + (nBlock << 16)));
320 /*
321 * dummy read
322 */
323 c1 = *pWritePtr;
324
325 kick_open();
326 /*
327 * erase
328 */
329 *(volatile unsigned char *) pWritePtr = 0x20;
330
331 /*
332 * confirm
333 */
334 *(volatile unsigned char *) pWritePtr = 0xD0;
335
336 /*
337 * wait 10 ms
338 */
339 msleep(10);
340
341 /*
342 * wait while erasing in process (up to 10 sec)
343 */
344 timeout = jiffies + 10 * HZ;
345 c1 = 0;
346 while (!(c1 & 0x80) && time_before(jiffies, timeout)) {
347 msleep(10);
348 /*
349 * read any address
350 */
351 c1 = *(volatile unsigned char *) (pWritePtr);
352 // printk("Flash_erase: status=%X.\n",c1);
353 }
354
355 /*
356 * set flash for normal read access
357 */
358 kick_open();
359 // *(volatile unsigned char*)(FLASH_BASE+0x8000) = 0xFF;
360 *(volatile unsigned char *) pWritePtr = 0xFF; //back to normal operation
361
362 /*
363 * check if erase errors were reported
364 */
365 if (c1 & 0x20) {
366 printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr);
367
368 /*
369 * reset error
370 */
371 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
372 return -2;
373 }
374
375 /*
376 * just to make sure - verify if erased OK...
377 */
378 msleep(10);
379
380 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + (nBlock << 16)));
381
382 for (temp = 0; temp < 16 * 1024; temp++, pWritePtr += 4) {
383 if ((temp1 = *(volatile unsigned int *) pWritePtr) != 0xFFFFFFFF) {
384 printk(KERN_ERR "flash_erase: verify err at %p = %X\n",
385 pWritePtr, temp1);
386 return -1;
387 }
388 }
389
390 return 0;
391
392 }
393
394 /*
395 * write_block will limit number of bytes written to the space in this block
396 */
write_block(unsigned long p,const char __user * buf,int count)397 static int write_block(unsigned long p, const char __user *buf, int count)
398 {
399 volatile unsigned int c1;
400 volatile unsigned int c2;
401 unsigned char *pWritePtr;
402 unsigned int uAddress;
403 unsigned int offset;
404 unsigned long timeout;
405 unsigned long timeout1;
406
407 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
408
409 /*
410 * check if write will end in this block....
411 */
412 offset = p & 0xFFFF;
413
414 if (offset + count > 0x10000)
415 count = 0x10000 - offset;
416
417 /*
418 * wait up to 30 sec for this block
419 */
420 timeout = jiffies + 30 * HZ;
421
422 for (offset = 0; offset < count; offset++, pWritePtr++) {
423 uAddress = (unsigned int) pWritePtr;
424 uAddress &= 0xFFFFFFFC;
425 if (__get_user(c2, buf + offset))
426 return -EFAULT;
427
428 WriteRetry:
429 /*
430 * dummy read
431 */
432 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
433
434 /*
435 * kick open the write gate
436 */
437 kick_open();
438
439 /*
440 * program footbridge to the correct offset...0..3
441 */
442 *CSR_ROMWRITEREG = (unsigned int) pWritePtr & 3;
443
444 /*
445 * write cmd
446 */
447 *(volatile unsigned char *) (uAddress) = 0x40;
448
449 /*
450 * data to write
451 */
452 *(volatile unsigned char *) (uAddress) = c2;
453
454 /*
455 * get status
456 */
457 *(volatile unsigned char *) (FLASH_BASE + 0x10000) = 0x70;
458
459 c1 = 0;
460
461 /*
462 * wait up to 1 sec for this byte
463 */
464 timeout1 = jiffies + 1 * HZ;
465
466 /*
467 * while not ready...
468 */
469 while (!(c1 & 0x80) && time_before(jiffies, timeout1))
470 c1 = *(volatile unsigned char *) (FLASH_BASE + 0x8000);
471
472 /*
473 * if timeout getting status
474 */
475 if (time_after_eq(jiffies, timeout1)) {
476 kick_open();
477 /*
478 * reset err
479 */
480 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
481
482 goto WriteRetry;
483 }
484 /*
485 * switch on read access, as a default flash operation mode
486 */
487 kick_open();
488 /*
489 * read access
490 */
491 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0xFF;
492
493 /*
494 * if hardware reports an error writing, and not timeout -
495 * reset the chip and retry
496 */
497 if (c1 & 0x10) {
498 kick_open();
499 /*
500 * reset err
501 */
502 *(volatile unsigned char *) (FLASH_BASE + 0x8000) = 0x50;
503
504 /*
505 * before timeout?
506 */
507 if (time_before(jiffies, timeout)) {
508 if (flashdebug)
509 printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n",
510 pWritePtr - FLASH_BASE);
511
512 /*
513 * wait couple ms
514 */
515 msleep(10);
516
517 goto WriteRetry;
518 } else {
519 printk(KERN_ERR "write_block: timeout at 0x%X\n",
520 pWritePtr - FLASH_BASE);
521 /*
522 * return error -2
523 */
524 return -2;
525
526 }
527 }
528 }
529
530 msleep(10);
531
532 pWritePtr = (unsigned char *) ((unsigned int) (FLASH_BASE + p));
533
534 for (offset = 0; offset < count; offset++) {
535 char c, c1;
536 if (__get_user(c, buf))
537 return -EFAULT;
538 buf++;
539 if ((c1 = *pWritePtr++) != c) {
540 printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n",
541 pWritePtr - FLASH_BASE, c1, c);
542 return 0;
543 }
544 }
545
546 return count;
547 }
548
549
kick_open(void)550 static void kick_open(void)
551 {
552 unsigned long flags;
553
554 /*
555 * we want to write a bit pattern XXX1 to Xilinx to enable
556 * the write gate, which will be open for about the next 2ms.
557 */
558 raw_spin_lock_irqsave(&nw_gpio_lock, flags);
559 nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE);
560 raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
561
562 /*
563 * let the ISA bus to catch on...
564 */
565 udelay(25);
566 }
567
568 static const struct file_operations flash_fops =
569 {
570 .owner = THIS_MODULE,
571 .llseek = flash_llseek,
572 .read = flash_read,
573 .write = flash_write,
574 .unlocked_ioctl = flash_ioctl,
575 };
576
577 static struct miscdevice flash_miscdev =
578 {
579 NWFLASH_MINOR,
580 "nwflash",
581 &flash_fops
582 };
583
nwflash_init(void)584 static int __init nwflash_init(void)
585 {
586 int ret = -ENODEV;
587
588 if (machine_is_netwinder()) {
589 int id;
590
591 FLASH_BASE = ioremap(DC21285_FLASH, KFLASH_SIZE4);
592 if (!FLASH_BASE)
593 goto out;
594
595 id = get_flash_id();
596 if ((id != KFLASH_ID) && (id != KFLASH_ID4)) {
597 ret = -ENXIO;
598 iounmap((void *)FLASH_BASE);
599 printk("Flash: incorrect ID 0x%04X.\n", id);
600 goto out;
601 }
602
603 printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
604 NWFLASH_VERSION, id, gbFlashSize / (1024 * 1024));
605
606 ret = misc_register(&flash_miscdev);
607 if (ret < 0) {
608 iounmap((void *)FLASH_BASE);
609 }
610 }
611 out:
612 return ret;
613 }
614
nwflash_exit(void)615 static void __exit nwflash_exit(void)
616 {
617 misc_deregister(&flash_miscdev);
618 iounmap((void *)FLASH_BASE);
619 }
620
621 MODULE_DESCRIPTION("NetWinder flash memory driver");
622 MODULE_LICENSE("GPL");
623
624 module_param(flashdebug, bool, 0644);
625
626 module_init(nwflash_init);
627 module_exit(nwflash_exit);
628