xref: /linux/tools/testing/selftests/powerpc/tm/tm-poison.c (revision 762f99f4f3cb41a775b5157dd761217beba65873)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright 2019, Gustavo Romero, Michael Neuling, IBM Corp.
4  *
5  * This test will spawn two processes. Both will be attached to the same
6  * CPU (CPU 0). The child will be in a loop writing to FP register f31 and
7  * VMX/VEC/Altivec register vr31 a known value, called poison, calling
8  * sched_yield syscall after to allow the parent to switch on the CPU.
9  * Parent will set f31 and vr31 to 1 and in a loop will check if f31 and
10  * vr31 remain 1 as expected until a given timeout (2m). If the issue is
11  * present child's poison will leak into parent's f31 or vr31 registers,
12  * otherwise, poison will never leak into parent's f31 and vr31 registers.
13  */
14 
15 #define _GNU_SOURCE
16 #include <stdio.h>
17 #include <stdlib.h>
18 #include <unistd.h>
19 #include <inttypes.h>
20 #include <sched.h>
21 #include <sys/types.h>
22 #include <signal.h>
23 
24 #include "tm.h"
25 
tm_poison_test(void)26 int tm_poison_test(void)
27 {
28 	int cpu, pid;
29 	cpu_set_t cpuset;
30 	uint64_t poison = 0xdeadbeefc0dec0fe;
31 	uint64_t unknown = 0;
32 	bool fail_fp = false;
33 	bool fail_vr = false;
34 
35 	SKIP_IF(!have_htm());
36 	SKIP_IF(htm_is_synthetic());
37 
38 	cpu = pick_online_cpu();
39 	FAIL_IF(cpu < 0);
40 
41 	// Attach both Child and Parent to the same CPU
42 	CPU_ZERO(&cpuset);
43 	CPU_SET(cpu, &cpuset);
44 	FAIL_IF(sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0);
45 
46 	pid = fork();
47 	if (!pid) {
48 		/**
49 		 * child
50 		 */
51 		while (1) {
52 			sched_yield();
53 			asm (
54 				"mtvsrd 31, %[poison];" // f31 = poison
55 				"mtvsrd 63, %[poison];" // vr31 = poison
56 
57 				: : [poison] "r" (poison) : );
58 		}
59 	}
60 
61 	/**
62 	 * parent
63 	 */
64 	asm (
65 		/*
66 		 * Set r3, r4, and f31 to known value 1 before entering
67 		 * in transaction. They won't be written after that.
68 		 */
69 		"       li      3, 0x1          ;"
70 		"       li      4, 0x1          ;"
71 		"       mtvsrd  31, 4           ;"
72 
73 		/*
74 		 * The Time Base (TB) is a 64-bit counter register that is
75 		 * independent of the CPU clock and which is incremented
76 		 * at a frequency of 512000000 Hz, so every 1.953125ns.
77 		 * So it's necessary 120s/0.000000001953125s = 61440000000
78 		 * increments to get a 2 minutes timeout. Below we set that
79 		 * value in r5 and then use r6 to track initial TB value,
80 		 * updating TB values in r7 at every iteration and comparing it
81 		 * to r6. When r7 (current) - r6 (initial) > 61440000000 we bail
82 		 * out since for sure we spent already 2 minutes in the loop.
83 		 * SPR 268 is the TB register.
84 		 */
85 		"       lis     5, 14           ;"
86 		"       ori     5, 5, 19996     ;"
87 		"       sldi    5, 5, 16        ;" // r5 = 61440000000
88 
89 		"       mfspr   6, 268          ;" // r6 (TB initial)
90 		"1:     mfspr   7, 268          ;" // r7 (TB current)
91 		"       subf    7, 6, 7         ;" // r7 - r6 > 61440000000 ?
92 		"       cmpd    7, 5            ;"
93 		"       bgt     3f              ;" // yes, exit
94 
95 		/*
96 		 * Main loop to check f31
97 		 */
98 		"       tbegin.                 ;" // no, try again
99 		"       beq     1b              ;" // restart if no timeout
100 		"       mfvsrd  3, 31           ;" // read f31
101 		"       cmpd    3, 4            ;" // f31 == 1 ?
102 		"       bne     2f              ;" // broken :-(
103 		"       tabort. 3               ;" // try another transaction
104 		"2:     tend.                   ;" // commit transaction
105 		"3:     mr    %[unknown], 3     ;" // record r3
106 
107 		: [unknown] "=r" (unknown)
108 		:
109 		: "cr0", "r3", "r4", "r5", "r6", "r7", "vs31"
110 
111 		);
112 
113 	/*
114 	 * On leak 'unknown' will contain 'poison' value from child,
115 	 * otherwise (no leak) 'unknown' will contain the same value
116 	 * as r3 before entering in transactional mode, i.e. 0x1.
117 	 */
118 	fail_fp = unknown != 0x1;
119 	if (fail_fp)
120 		printf("Unknown value %#"PRIx64" leaked into f31!\n", unknown);
121 	else
122 		printf("Good, no poison or leaked value into FP registers\n");
123 
124 	asm (
125 		/*
126 		 * Set r3, r4, and vr31 to known value 1 before entering
127 		 * in transaction. They won't be written after that.
128 		 */
129 		"       li      3, 0x1          ;"
130 		"       li      4, 0x1          ;"
131 		"       mtvsrd  63, 4           ;"
132 
133 		"       lis     5, 14           ;"
134 		"       ori     5, 5, 19996     ;"
135 		"       sldi    5, 5, 16        ;" // r5 = 61440000000
136 
137 		"       mfspr   6, 268          ;" // r6 (TB initial)
138 		"1:     mfspr   7, 268          ;" // r7 (TB current)
139 		"       subf    7, 6, 7         ;" // r7 - r6 > 61440000000 ?
140 		"       cmpd    7, 5            ;"
141 		"       bgt     3f              ;" // yes, exit
142 
143 		/*
144 		 * Main loop to check vr31
145 		 */
146 		"       tbegin.                 ;" // no, try again
147 		"       beq     1b              ;" // restart if no timeout
148 		"       mfvsrd  3, 63           ;" // read vr31
149 		"       cmpd    3, 4            ;" // vr31 == 1 ?
150 		"       bne     2f              ;" // broken :-(
151 		"       tabort. 3               ;" // try another transaction
152 		"2:     tend.                   ;" // commit transaction
153 		"3:     mr    %[unknown], 3     ;" // record r3
154 
155 		: [unknown] "=r" (unknown)
156 		:
157 		: "cr0", "r3", "r4", "r5", "r6", "r7", "vs63"
158 
159 		);
160 
161 	/*
162 	 * On leak 'unknown' will contain 'poison' value from child,
163 	 * otherwise (no leak) 'unknown' will contain the same value
164 	 * as r3 before entering in transactional mode, i.e. 0x1.
165 	 */
166 	fail_vr = unknown != 0x1;
167 	if (fail_vr)
168 		printf("Unknown value %#"PRIx64" leaked into vr31!\n", unknown);
169 	else
170 		printf("Good, no poison or leaked value into VEC registers\n");
171 
172 	kill(pid, SIGKILL);
173 
174 	return (fail_fp | fail_vr);
175 }
176 
main(int argc,char * argv[])177 int main(int argc, char *argv[])
178 {
179 	/* Test completes in about 4m */
180 	test_harness_set_timeout(250);
181 	return test_harness(tm_poison_test, "tm_poison_test");
182 }
183