1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * E3C EC100 demodulator driver
4 *
5 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
6 */
7
8 #include <media/dvb_frontend.h>
9 #include "ec100.h"
10
11 struct ec100_state {
12 struct i2c_adapter *i2c;
13 struct dvb_frontend frontend;
14 struct ec100_config config;
15
16 u16 ber;
17 };
18
19 /* write single register */
ec100_write_reg(struct ec100_state * state,u8 reg,u8 val)20 static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val)
21 {
22 int ret;
23 u8 buf[2] = {reg, val};
24 struct i2c_msg msg[1] = {
25 {
26 .addr = state->config.demod_address,
27 .flags = 0,
28 .len = sizeof(buf),
29 .buf = buf,
30 }
31 };
32
33 ret = i2c_transfer(state->i2c, msg, 1);
34 if (ret == 1) {
35 ret = 0;
36 } else {
37 dev_warn(&state->i2c->dev, "%s: i2c wr failed=%d reg=%02x\n",
38 KBUILD_MODNAME, ret, reg);
39 ret = -EREMOTEIO;
40 }
41
42 return ret;
43 }
44
45 /* read single register */
ec100_read_reg(struct ec100_state * state,u8 reg,u8 * val)46 static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val)
47 {
48 int ret;
49 struct i2c_msg msg[2] = {
50 {
51 .addr = state->config.demod_address,
52 .flags = 0,
53 .len = 1,
54 .buf = ®
55 }, {
56 .addr = state->config.demod_address,
57 .flags = I2C_M_RD,
58 .len = 1,
59 .buf = val
60 }
61 };
62
63 ret = i2c_transfer(state->i2c, msg, 2);
64 if (ret == 2) {
65 ret = 0;
66 } else {
67 dev_warn(&state->i2c->dev, "%s: i2c rd failed=%d reg=%02x\n",
68 KBUILD_MODNAME, ret, reg);
69 ret = -EREMOTEIO;
70 }
71
72 return ret;
73 }
74
ec100_set_frontend(struct dvb_frontend * fe)75 static int ec100_set_frontend(struct dvb_frontend *fe)
76 {
77 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
78 struct ec100_state *state = fe->demodulator_priv;
79 int ret;
80 u8 tmp, tmp2;
81
82 dev_dbg(&state->i2c->dev, "%s: frequency=%d bandwidth_hz=%d\n",
83 __func__, c->frequency, c->bandwidth_hz);
84
85 /* program tuner */
86 if (fe->ops.tuner_ops.set_params)
87 fe->ops.tuner_ops.set_params(fe);
88
89 ret = ec100_write_reg(state, 0x04, 0x06);
90 if (ret)
91 goto error;
92 ret = ec100_write_reg(state, 0x67, 0x58);
93 if (ret)
94 goto error;
95 ret = ec100_write_reg(state, 0x05, 0x18);
96 if (ret)
97 goto error;
98
99 /* reg/bw | 6 | 7 | 8
100 -------+------+------+------
101 A 0x1b | 0xa1 | 0xe7 | 0x2c
102 A 0x1c | 0x55 | 0x63 | 0x72
103 -------+------+------+------
104 B 0x1b | 0xb7 | 0x00 | 0x49
105 B 0x1c | 0x55 | 0x64 | 0x72 */
106
107 switch (c->bandwidth_hz) {
108 case 6000000:
109 tmp = 0xb7;
110 tmp2 = 0x55;
111 break;
112 case 7000000:
113 tmp = 0x00;
114 tmp2 = 0x64;
115 break;
116 case 8000000:
117 default:
118 tmp = 0x49;
119 tmp2 = 0x72;
120 }
121
122 ret = ec100_write_reg(state, 0x1b, tmp);
123 if (ret)
124 goto error;
125 ret = ec100_write_reg(state, 0x1c, tmp2);
126 if (ret)
127 goto error;
128
129 ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */
130 if (ret)
131 goto error;
132 ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */
133 if (ret)
134 goto error;
135
136 ret = ec100_write_reg(state, 0x08, 0x24);
137 if (ret)
138 goto error;
139
140 ret = ec100_write_reg(state, 0x00, 0x00); /* go */
141 if (ret)
142 goto error;
143 ret = ec100_write_reg(state, 0x00, 0x20); /* go */
144 if (ret)
145 goto error;
146
147 return ret;
148 error:
149 dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
150 return ret;
151 }
152
ec100_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * fesettings)153 static int ec100_get_tune_settings(struct dvb_frontend *fe,
154 struct dvb_frontend_tune_settings *fesettings)
155 {
156 fesettings->min_delay_ms = 300;
157 fesettings->step_size = 0;
158 fesettings->max_drift = 0;
159
160 return 0;
161 }
162
ec100_read_status(struct dvb_frontend * fe,enum fe_status * status)163 static int ec100_read_status(struct dvb_frontend *fe, enum fe_status *status)
164 {
165 struct ec100_state *state = fe->demodulator_priv;
166 int ret;
167 u8 tmp;
168 *status = 0;
169
170 ret = ec100_read_reg(state, 0x42, &tmp);
171 if (ret)
172 goto error;
173
174 if (tmp & 0x80) {
175 /* bit7 set - have lock */
176 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
177 FE_HAS_SYNC | FE_HAS_LOCK;
178 } else {
179 ret = ec100_read_reg(state, 0x01, &tmp);
180 if (ret)
181 goto error;
182
183 if (tmp & 0x10) {
184 /* bit4 set - have signal */
185 *status |= FE_HAS_SIGNAL;
186 if (!(tmp & 0x01)) {
187 /* bit0 clear - have ~valid signal */
188 *status |= FE_HAS_CARRIER | FE_HAS_VITERBI;
189 }
190 }
191 }
192
193 return ret;
194 error:
195 dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
196 return ret;
197 }
198
ec100_read_ber(struct dvb_frontend * fe,u32 * ber)199 static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber)
200 {
201 struct ec100_state *state = fe->demodulator_priv;
202 int ret;
203 u8 tmp, tmp2;
204 u16 ber2;
205
206 *ber = 0;
207
208 ret = ec100_read_reg(state, 0x65, &tmp);
209 if (ret)
210 goto error;
211 ret = ec100_read_reg(state, 0x66, &tmp2);
212 if (ret)
213 goto error;
214
215 ber2 = (tmp2 << 8) | tmp;
216
217 /* if counter overflow or clear */
218 if (ber2 < state->ber)
219 *ber = ber2;
220 else
221 *ber = ber2 - state->ber;
222
223 state->ber = ber2;
224
225 return ret;
226 error:
227 dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
228 return ret;
229 }
230
ec100_read_signal_strength(struct dvb_frontend * fe,u16 * strength)231 static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
232 {
233 struct ec100_state *state = fe->demodulator_priv;
234 int ret;
235 u8 tmp;
236
237 ret = ec100_read_reg(state, 0x24, &tmp);
238 if (ret) {
239 *strength = 0;
240 goto error;
241 }
242
243 *strength = ((tmp << 8) | tmp);
244
245 return ret;
246 error:
247 dev_dbg(&state->i2c->dev, "%s: failed=%d\n", __func__, ret);
248 return ret;
249 }
250
ec100_read_snr(struct dvb_frontend * fe,u16 * snr)251 static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr)
252 {
253 *snr = 0;
254 return 0;
255 }
256
ec100_read_ucblocks(struct dvb_frontend * fe,u32 * ucblocks)257 static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
258 {
259 *ucblocks = 0;
260 return 0;
261 }
262
ec100_release(struct dvb_frontend * fe)263 static void ec100_release(struct dvb_frontend *fe)
264 {
265 struct ec100_state *state = fe->demodulator_priv;
266 kfree(state);
267 }
268
269 static const struct dvb_frontend_ops ec100_ops;
270
ec100_attach(const struct ec100_config * config,struct i2c_adapter * i2c)271 struct dvb_frontend *ec100_attach(const struct ec100_config *config,
272 struct i2c_adapter *i2c)
273 {
274 int ret;
275 struct ec100_state *state = NULL;
276 u8 tmp;
277
278 /* allocate memory for the internal state */
279 state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL);
280 if (state == NULL)
281 goto error;
282
283 /* setup the state */
284 state->i2c = i2c;
285 memcpy(&state->config, config, sizeof(struct ec100_config));
286
287 /* check if the demod is there */
288 ret = ec100_read_reg(state, 0x33, &tmp);
289 if (ret || tmp != 0x0b)
290 goto error;
291
292 /* create dvb_frontend */
293 memcpy(&state->frontend.ops, &ec100_ops,
294 sizeof(struct dvb_frontend_ops));
295 state->frontend.demodulator_priv = state;
296
297 return &state->frontend;
298 error:
299 kfree(state);
300 return NULL;
301 }
302 EXPORT_SYMBOL_GPL(ec100_attach);
303
304 static const struct dvb_frontend_ops ec100_ops = {
305 .delsys = { SYS_DVBT },
306 .info = {
307 .name = "E3C EC100 DVB-T",
308 .caps =
309 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
310 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
311 FE_CAN_QPSK | FE_CAN_QAM_16 |
312 FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
313 FE_CAN_TRANSMISSION_MODE_AUTO |
314 FE_CAN_GUARD_INTERVAL_AUTO |
315 FE_CAN_HIERARCHY_AUTO |
316 FE_CAN_MUTE_TS
317 },
318
319 .release = ec100_release,
320 .set_frontend = ec100_set_frontend,
321 .get_tune_settings = ec100_get_tune_settings,
322 .read_status = ec100_read_status,
323 .read_ber = ec100_read_ber,
324 .read_signal_strength = ec100_read_signal_strength,
325 .read_snr = ec100_read_snr,
326 .read_ucblocks = ec100_read_ucblocks,
327 };
328
329 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
330 MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver");
331 MODULE_LICENSE("GPL");
332